A Hybrid Quantum Dot−Antibody Fragment Fluorescence Resonance Energy Transfer-Based TNT Sensor

5-Oxo-7,7-Dimethyl-5,6,7,8-Tetrahydro-4-H-Chromene Bearing N, N-Dimethylaniline as Turn-Off Fluorescent Chemosensor for Picric Acid in Real Water Sample

We have synthesized a one-pot, three-component pyran-based fluorescence chemosensor using onion extract as a green catalyst. The confirmed structure of the 1:2 binding of receptor SPR-2-picric acid adduct revealed that the pyran-based receptor accommodated two guest picric acid molecules through non-covalent interactions. UV-Vis and fluorescence spectroscopy show high selectivity and sensitivity towards picric acid. The 1D/2D NMR and Job's plot analysis show the complexation and stoichiometric binding of the receptor SPR-2 with picric acid are 1:2. The 1H NMR spectral studies confirm that the formation of receptor SPR-2-picric acid adduct via weak hydrogen bonding. The cooperativity of the receptor SPR-2-picric acid adduct shows negative cooperativity due to the weak hydrogen bonding of receptor SPR-2 and picric acid. Further, the density functional theory (DFT) confirmed the molecular level interaction of the SPR-2 and receptor SPR-2-Picric acid adduct. The receptor was effectively used to assess picric acid concentrations in real water samples.

Design and Synthesis of an Efficient Fluorescent Probe Based on Oxacalix[4]arene for the Selective Detection of Trinitrophenol (TNP) Explosives in Aqueous System

We present the synthesis of a new oxacalix[4]arene system, DMANSOC, wherein two 5-(dimethylamino)-1-naphthalene sulfonamide subunits are attached to the lower rims of the basic oxacalix[4]arene platform. Extensive spectrophotometric studies were conducted to investigate the selectivity and sensitivity of DMANSOC towards nitroaromatic explosives. Detailed analysis of spectrophotometric data, utilizing techniques such as Stern-Volmer, Benesi-Hildebrand, Job's plot, and interference study, unequivocally demonstrated the effectiveness of DMANSOC as a highly efficient fluorescent sensor for 2,4,6-trinitrophenol explosive (TNP) detection in an aqueous medium. The sensor exhibited a linear concentration range of 7.5 μM to 50 μM, with a low detection limit of 4.64 μM and a high binding affinity of 2.45 × 104 M towards TNP. Furthermore, the efficiency of the sensor in environmental samples contaminated with TNP was evaluated, yielding excellent recovery rates. Complementary DFT calculations and molecular dynamics simulations were performed to elucidate the mechanism behind the selective fluorescence quenching of DMANSOC in the presence of TNP.

Colloidal Quantum Dots for Explosive Detection: Trends and Perspectives

Sensitive, accurate, and reliable detection of explosives has become one of the major needs for international security and environmental protection. Colloidal quantum dots, because of their unique chemical, optical, and electrical properties, as well as easy synthesis route and functionalization, have demonstrated high potential to meet the requirements for the development of suitable sensors, boosting the research in the field of explosive detection. Here, we critically review the most relevant research works, highlighting three different mechanisms for explosive detection based on colloidal quantum dots, namely photoluminescence, electrochemical, and chemoresistive sensing. We provide a comprehensive overview and an extensive discussion and comparison in terms of the most relevant sensor parameters. We highlight advantages, limitations, and challenges of quantum dot-based explosive sensors and outline future research directions for the advancement of knowledge in this surging research field.

One-Dimensionally Arranged Quantum-Dot Superstructures Guided by a Supramolecular Polymer Template

Colloidal quantum dots (QDs) exhibit important photophysical properties, such as long-range energy diffusion, miniband formation, and collective photoluminescence, when aggregated into well-defined superstructures, such as three-dimensional (3D) and two-dimensional (2D) superlattices. However, the construction of one-dimensional (1D) QD superstructures, which have a simpler arrangement, is challenging; therefore, the photophysical properties of 1D-arranged QDs have not been studied previously. Herein, we report a versatile strategy to obtain 1D-arranged QDs using a supramolecular polymer (SP) template. The SP is composed of self-assembling cholesterol derivatives containing two amide groups for hydrogen bonding and a carboxyl group as an adhesion moiety on the QDs. Upon mixing the SP and dispersed QDs in low-polarity solvents, the QDs self-adhered to the SP and self-arranged into 1D superstructures through van der Waals interactions between the surface organic ligands of the QDs, as confirmed by transmission electron microscopy. Furthermore, we revealed efficient photoinduced fluorescence resonance energy transfer between the 1D-arranged QDs by an in-depth analysis of the emission spectra and decay curves.

Exposure, toxicological mechanism of endocrine disrupting compounds and future direction of identification using nano-architectonics

Endocrine-disrupting compounds (EDC) are a group of exogenous chemicals that structurally mimic hormones and interfere with the hormonal signaling cascade. EDC interacts with hormone receptors, transcriptional activators, and co-activators, altering the signaling pathway at both genomic and non-genomic levels. Consequently, these compounds are responsible for adverse health ailments such as cancer, reproductive issues, obesity, and cardiovascular and neurological disorders. The persistent nature and increasing incidence of environmental contamination from anthropogenic and industrial effluents have become a global concern, resulting in a movement in both developed and developing countries to identify and estimate the degree of exposure to EDC. The U.S. Environment Protection Agency (EPA) has outlined a series of in vitro and in vivo assays to screen potential endocrine disruptors. However, the multidisciplinary nature and concerns over the widespread application demand alternative and practical techniques for identifying and estimating EDC. The review chronicles the state-of-art 20 years (1990-2023) of scientific literature regarding EDC's exposure and molecular mechanism, highlighting the toxicological effects on the biological system. Alteration in signaling mechanisms by representative endocrine disruptors such as bisphenol A (BPA), diethylstilbestrol (DES), and genistein has been emphasized. We further discuss the currently available assays and techniques for in vitro detection and propose the prominence of designing nano-architectonic-sensor substrates for on-site detection of EDC in the contaminated aqueous environment.

Trace Explosive Detection Based on Photonic Crystal Amplified Fluorescence

With increasing demand for public security and environmental protection, it is highly desirable to develop strategies to identify trace explosives (e. g., 2,4,6-trinitrotoluene (TNT)). Herein, we report novel photonic crystal (PC)-based sensor chips for trace TNT detection by using amplification effect of PCs on fluorescence (FL) signals. The sensor chips are constructed by integrating silica nanoparticles (NPs) modified with (3-aminopropyl)triethoxysilane (APTES) and fluorescein isothiocyanate isomer (FITC) and PC substrates. The amino groups on FITC-APTES-silica NPs can specifically bind with TNT molecules to form Meisenheimer complexes and strongly quench the FL signal of neighboring fluorophores FITC through Förster resonance energy transfer. PCs with matched PBG can amplify the FL signal of FITC-APTES-silica NPs about 24.4-fold and significantly improve sensitivity and resolution of trace TNT detection with the limit of detection of 0.23 nM. The PC-based sensor chips are stable, sensitive, and reliable TNT sensing platforms, showing great potential in homeland safety and environmental protection.

Recent progress in homogeneous immunosensors based on fluorescence or bioluminescence using antibody engineering

Homogeneous immunosensors integrate the advantages of both biosensors and immunoassays; they include speed, high sensitivity, and accuracy. They have been developed rapidly in the past few years and offer a cost-effective alternative technology with rapidity, sensitivity, and user-friendliness, which has been applied in a wide variety of applications. This review introduces the current directions of immunosensor development, focusing on fluorescent and bioluminescent immunosensors and highlighting the advantages, improvements, and key approaches to overcome the limitations of each.

All-quantum dot based Förster resonant energy transfer: key parameters for high-efficiency biosensing

While colloidal quantum dots (QDs) are commonly used as fluorescent donors within biosensors based on Förster resonant energy transfer (FRET), they are hesitantly employed as acceptors. On the sole basis of Förster theory and the well-known behaviour of organic dyes, it is often argued that the QD absorption band over the UV-visible range is too wide. Discarding these preconceptions inherited from classical fluorophores, we experimentally examine the FRET process occurring between donor and acceptor CdTe QDs and provide a mathematical description of it. We evidence that the specific features of QDs unexpectedly lead to the enhancement of acceptors' emission (up to +400%), and are thus suitable for the design of highly efficient all-QD based FRET sensors. Our model enables us to identify the critical parameters maximizing the contrast between positive and negative biosensing readouts: the concentrations of donors and acceptors, their spectral overlap, the densities of their excitonic states, their dissipative coupling with the medium and the statistics of QD-QD chemical pairing emerge as subtle and determinant parameters. We relate them quantitatively to the measured QD-QD FRET efficiency and discuss how they must be optimized for biosensing applications.

Nanomaterials for optical biosensors in forensic analysis

Biosensors are compact analytical devices capable of transducing a biological interaction event into a measurable signal outcome in real-time. They can provide sensitive and affordable analysis of samples without the need for additional laboratory equipment or complex preparation steps. Biosensors may be beneficial for forensic analysis as they can facilitate large-scale high-throughput, sensitive screening of forensic samples to detect target molecules that are of high evidential value. Nanomaterials are gaining attention as desirable components of biosensors that can enhance detection and signal efficiency. Biosensors that incorporate nanomaterials within their design have been widely reported and developed for medical purposes but are yet to find routine employment within forensic science despite their proven potential. In this article, key examples of the use of nanomaterials within optical biosensors designed for forensic analysis are outlined. Their design and mechanism of detection are both considered throughout, discussing how nanomaterials can enhance the detection of the target analyte. The critical evaluation of the optical biosensors detailed within this review article should help to guide future optical biosensor design via the incorporation of nanomaterials, for not only forensic analysis but alternative analytical fields where such biosensors may prove a valuable addition to current workflows.

Rapid optical sensor for recognition of explosive 2,4,6-TNP traces in water through fluorescent ZnSe quantum dots

In this report, blue fluorescent zinc selenide quantum dots (ZnSe QDs) were synthesized using 3-mercaptopropionic acid through a direct aqueous route at a lower temperature of 70 °C. The photoluminescence (PL) characteristics of ZnSe QDs have been employed to recognize nitroaromatic compounds, i.e., traces of 2,4,6-TNP (picric acid) in water. The sensing of nitroaromatic compounds was performed via fluorescence techniques. The PL band of ZnSe QDs observed at 490 nm is selectively quenched with an increasing concentration of picric acid in DI water and river water. For the proposed sensing probe, the Stern-Volmer (S-V) plot shows linearity over the range of 2.0 µM-0.25 mM with the detection limit of 12.4 × 10^-6 M without any interference effect of other nitroaromatic compounds. The plausible mechanism of PL quenching is considered as the inner filter effect, based on absorption, PL and PL lifetimes.

Fluorescent nanoparticles as tools in ecology and physiology

Fluorescent nanoparticles (FNPs) have been widely used in chemistry and medicine for decades, but their employment in biology is relatively recent. Past reviews on FNPs have focused on chemical, physical or medical uses, making the extrapolation to biological applications difficult. In biology, FNPs have largely been used for biosensing and molecular tracking. However, concerns over toxicity in early types of FNPs, such as cadmium-containing quantum dots (QDs), may have prevented wide adoption. Recent developments, especially in non-Cd-containing FNPs, have alleviated toxicity problems, facilitating the use of FNPs for addressing ecological, physiological and molecule-level processes in biological research. Standardised protocols from synthesis to application and interdisciplinary approaches are critical for establishing FNPs in the biologists' tool kit. Here, we present an introduction to FNPs, summarise their use in biological applications, and discuss technical issues such as data reliability and biocompatibility. We assess whether biological research can benefit from FNPs and suggest ways in which FNPs can be applied to answer questions in biology. We conclude that FNPs have a great potential for studying various biological processes, especially tracking, sensing and imaging in physiology and ecology.

A Highly Ordered Quantum Dot Supramolecular Assembly Exhibiting Photoinduced Emission Enhancement

Multicomponent supramolecular assembly systems enable the generation of materials with outstanding properties, not obtained from single-component systems, via a synergetic effect. Herein, we demonstrate a novel supramolecular coassembly system rendering highly ordered quantum dot (QD) arrangement structures formed via the self-assembly of azobenzene derivatives, where the photocontrollable photoluminescence (PL) properties of the QDs are realized based on photoisomerization. Upon mixing the assembled azobenzene derivatives and QDs in apolar media, a time-evolution coaggregation into hierarchical nanosheets with a highly ordered QD arrangement structure occurs. Upon photoirradiation, the nanosheets transform into ill-defined aggregates without arranged QDs together with enhancing the PL intensity. In days, the photoirradiated coaggregates undergo recovery of the PL properties corresponding to the arranged QDs through thermal isomerization.

Donor triggered aggregation induced dual emission, mechanochromism and sensing of nitroaromatics in aqueous solution

The title paper describes the photophysics of a series of 2-benzylidenemalononitrile (RDC) derivatives, having donor- π - acceptor (D-π-A) architecture in solution, solid state and in hydrosol. Interestingly, it is observed that by tuning the electronic energy levels via changing donor strength, one can play with the emissive properties to the large extent; from non- fluorescent to fluorescent, to aggregation induced dual fluorescence, to aggregation induced enhanced emission (AIEE). The nature of aggregation is studied by Field Emission Scanning Electron Microscope (FESEM). This aggregation induced emission (AIE) in hydrosol is used to develop a thin layer chromatography (TLC) based simple, easy to use technique to identify the trinitrophenol in aqueous solution as well as can distinguish the three positional nitrophenol derivatives.

Olfactory bulb-targeted quantum dot (QD) bioconjugate and Kv1.3 blocking peptide improve metabolic health in obese male mice

The olfactory system is a driver of feeding behavior, whereby olfactory acuity is modulated by the metabolic state of the individual. The excitability of the major output neurons of the olfactory bulb (OB) can be modulated through targeting a voltage-dependent potassium channel, Kv1.3, which responds to changes in metabolic factors such as insulin, glucose, and glucagon-like peptide-1. Because gene-targeted deletion or inhibition of Kv1.3 in the periphery has been found to increase energy metabolism and decrease body weight, we hypothesized that inhibition of Kv1.3 selectively in the OB could enhance excitability of the output neurons to evoke changes in energy homeostasis. We thereby employed metal-histidine coordination to self-assemble the Kv1.3 inhibitor margatoxin (MgTx) to fluorescent quantum dots (QDMgTx) as a means to label cells in vivo and test changes in neuronal excitability and metabolism when delivered to the OB. Using patch-clamp electrophysiology to measure Kv1.3 properties in heterologously expressed cells and native mitral cells in OB slices, we found that QDMgTx had a fast rate of inhibition, but with a reduced IC_50, and increased action potential firing frequency. QDMgTx was capable of labeling cloned Kv1.3 channels but was not visible when delivered to native Kv1.3 in the OB. Diet-induced obese mice were observed to reduce body weight and clear glucose more quickly following osmotic mini-pump delivery of QDMgTx/MgTx to the OB, and following MgTx delivery, they increased the use of fats as fuels (reduced respiratory exchange ratio). These results suggest that enhanced excitability of bulbar output neurons can drive metabolic responses.

Quantum dot to quantum dot Förster resonance energy transfer: engineering materials for visual color change sensing

In this work, quantum dots (QDs) of various heterostructured compositions and shell thicknesses are used as Förster or fluorescence resonance energy transfer (FRET) donors and acceptors to optimize QD-QD FRET sensing through materials design. While several reports have highlighted the advantages of using QD-dye, rather than dye-dye, FRET in sensing applications, QD-QD FRET has lagged behind in development as a result of high background signal from direct acceptor excitation. However, in designing sensors for longitudinal studies, QD-dye sensors are limited by the photostability of the fluorescent dye. While fluorescence generally affords higher sensitivity than absorbance-based readouts, the instrumentation needed for detecting fluorescence can be expensive, motivating the development of sensors bright enough to be seen by eye or imaged with cheap consumer electronics. Harnessing the exceptional brightness of QDs, our study focuses on the development of QD-QD FRET pairs where color change is achieved for visual readout and instrument-free sensing. We demonstrate that bulk semiconductor material characteristics can be used to a priori predict and tailor the behavior of QD-QD FRET systems, and our findings show that it is possible to create QD donors that are brighter than their acceptors through concerted compositional and morphological choices in heterostructured QDs. This is significant for developing visual sensors, as we show that the most profound color change occurs when the direct acceptor emission is lower than that of the donor. Finally, the use of an optimal cadmium-free QD-QD FRET pair is presented in a pH sensor that shows a large range of pH-dependent color change with bright, instrument-free readout.

Photon induced quantum yield regeneration of cap-exchanged CdSe/CdS quantum rods for ratiometric biosensing and cellular imaging

Full water-dispersion of commercial hydrophobic CdSe/CdS core/shell quantum rods (QRs) was achieved by cap-exchange using a dihydrolipoic acid zwitterion ligand at a low ligand:QR molar ratio (LQMR) of 1000. However, this process almost completely quenched the QR fluorescence, greatly limiting its potential in downstream fluorescence based applications. Fortunately, we found that the QR fluorescence could be recovered by exposure to near ultra-violet to blue light radiation (e.g. 300-450 nm). These "reborn" QRs were found to be compact, bright, and stable, and were resistant to non-specific adsorption, which make them powerful fluorescent probes in broad biomedical applications. We demonstrated their potential in two model applications: first, the QRs were conjugated with His₈-tagged small antibody mimetic proteins (also known as Affimers) for the sensitive detection of target proteins via a Förster resonance energy transfer (FRET) readout strategy and second, the QR surface was functionalized with biotins for targeted imaging of cancer cells.

Peptide-Functionalized Quantum Dots for Rapid Label-Free Sensing of 2,4,6-Trinitrotoluene

Explosive compounds, such as 2,4,6-trinitrotoluene (TNT), pose a great concern in terms of both global public security and environmental protection. There are estimated to be hundreds of TNT contaminated sites all over the world, which will affect the health of humans, wildlife, and the ecosystem. Clearly, the ability to detect TNT in soils, water supplies, and wastewater is important for environmental studies but also important for security, such as in ports and boarders. However, conventional spectroscopic detection is not practical for on-site sensing because it requires sophisticated equipment and trained personnel. We report a rapid and simple chemical sensor for TNT by using TNT binding peptides which are conjugated to fluorescent CdTe/CdS quantum dots (QDs). QDs were synthesized in the aqueous phase, and the peptide was attached directly to the surface of the QDs by using thiol groups. The fluorescent emission from the QDs was quenched in response to the addition of TNT. The response could even be observed by the naked eye. The limit of detection from fluorescence spectroscopic measurement was estimated to be approximately 375 nM. In addition to the rapid response (within a few seconds), selective detection was demonstrated. We believe this label-free chemical sensor contributes to progress for the on-site explosive sensing.

Homogeneous immunoassay for alpha-fetoprotein based on the quenching of the fluorescence of quantum dots by antibody labelled with complexed copper ion tags

A homogeneous fluorescent immunoassay is described for the determination of alpha fetoprotein (AFP) relying on the interaction between copper ion complex and quantum dots (QDs). The copper ion complex-labelled antibody can be employed as a quencher of fluorescence of QDs and capture probe of AFP in homogeneous solution. The labelled antibody is mixed with QDs to form the immune ensemble probe. Upon the addition of AFP, the labelled antibody is stripped away from QDs by antigen-antibody combination leading to the increase in the fluorescence signal. Thus, the determination of AFP can be realized by fluorometry (best measured at excitation/emission wavelengths of 360/520 nm). The fluorescence intensity shows a good linear relationship with the AFP concentration ranging from 40 to 640 ng mL^-1, and the LOD is 26 ng mL^-1. The proposed method provides a new approach to incorporate metal complexes into QD-based biomolecule sensing. Graphical abstract Schematic presentation of a fluorescent probe comprised of quantum dots and antibody labelled with copper ion complex for homogeneous immunoassay of α-fetoprotein. The target antigen can break up the ground state QD/labelled antibody complex to set free the fluorescent QDs.

Supramolecular Sensing of 2,4,6-Trinitrophenol by a Tetrapyrenyl Conjugate of Calix[4]arene: Applicability in Solution, in Solid State, and on the Strips of Cellulose and Silica Gel and the Image Processing by a Cellular Phone

A calix[4]arene conjugate possessing a tetrapyrenyl moiety at its upper rim (R) is designed as a receptor for sensing trinitrophenol (TNP). To understand the role of the calix[4]arene platform and that of pyrenyl moieties in R, two other control molecules were synthesized. These are as follows: the one possessing a tetraphenyl moiety in place of tetrapyrenyl (R 1 ) and the other one is a p-pyrenyl-hydroxy benzene (R 2 ) that is devoid of the calix[4]arene platform. The R shows high sensitivity toward TNP in tetrahydrofuran (THF) over eleven other nitroaromatic compounds (NACs) studied by exhibiting large fluorescence enhancement and hence is selective to TNP over the other NACs studied. However, the control molecules R 1 and R 2 showed only marginal fluorescence enhancement, supporting the need of a calixarene platform and the presence of a tetrapyrenyl moiety in the receptor system for the selective sensing of TNP. Further, R 1 and R 2 are not suitable for sensing, since these exhibit similar fluorescence response over several NACs studied. The binding of TNP by R has been addressed by fluorescence titration and isothermal titration calorimetry. The nature of the complexation of TNP by R has been revealed by the computational calculations, wherein the data showed the entrapment of TNP by two adjacent pyrene moieties via π-π stacking interactions. Such host-guest complexation is expected to restrict the mobility of the pyrene moieties present in R. The reduction of the flexibility of the pyrenyl moieties of R upon TNP binding is evidenced by the 1H NMR spectral study, wherein this acts as an additional evidence for the complexation. In the present study, the sensing of TNP by R has been shown in THF solution, on the surface of silica gel and the cellulose paper to result in lowest detection limits (LODs) of 1.5, 3.5, and 6.5 μM, respectively. Even the solid mixture of R and TNP showed LOD of 2.1 μmol. Since R is expected to show supramolecular aggregation that is dependent on the guest species, the corresponding details were probed by microscopy techniques, using scanning electron microscopy, atomic force microscopy, and transmission electron microscopy methods, and significant changes in the aggregation of R upon interaction with TNP were found. Such aggregation is responsible for the observed fluorescence enhancement. Thus, the tetrapyrenyl calix[4]arene conjugate (R) acts as a sensitive and robust platform for selective detection of TNP from a mixture of nitroaromatic compounds (NACs) wherein the fluorescence intensities can be imaged and managed by a cellular phone.

Phage Display in the Quest for New Selective Recognition Elements for Biosensors

Phages are bacterial viruses that have gained a significant role in biotechnology owing to their widely studied biology and many advantageous characteristics. Perhaps the best-known application of phages is phage display that refers to the expression of foreign peptides or proteins outside the phage virion as a fusion with one of the phage coat proteins. In 2018, one half of the Nobel prize in chemistry was awarded jointly to George P. Smith and Sir Gregory P. Winter "for the phage display of peptides and antibodies." The outstanding technology has evolved and developed considerably since its first description in 1985, and today phage display is commonly used in a wide variety of disciplines, including drug discovery, enzyme optimization, biomolecular interaction studies, as well as biosensor development. A cornerstone of all biosensors, regardless of the sensor platform or transduction scheme used, is a sensitive and selective bioreceptor, or a recognition element, that can provide specific binding to the target analyte. Many environmentally or pharmacologically interesting target analytes might not have naturally appropriate binding partners for biosensor development, but phage display can facilitate the production of novel receptors beyond known biomolecular interactions, or against toxic or nonimmunogenic targets, making the technology a valuable tool in the quest of new recognition elements for biosensor development.

Plasmon-Enhanced Fluorescence Resonance Energy Transfer

In this review, we firstly introduce physical mechanism of fluorescence resonance energy transfer (FRET), the methods to measure FRET efficiency, and the applications of FRET. Secondly, we introduce the principle and applications of plasmon-enhanced fluorescence (PEF). Thirdly, we focused on the principle and applications of plasmon-enhanced FRET. This review can promote further understanding of FRET and PE-FRET.

A porous β-cyclodextrin-based terpolymer fluorescence sensor for in situ trinitrophenol detection

Permanent porosity plays a key role in fluorescent-based polymers with “on–off” emissive properties due to the role of guest adsorption at accessible fluorophore sites of the polymer framework. In particular, we report on the design of a porous fluorescent polymer (FL-PFP) composed of a covalently cross-linked ternary combination of β-cyclodextrin (β-CD), 4,4′-diisocyanato-3,3′-dimethyl biphenyl (DL) and tetrakis(4-hydoxyphenyl)ethene (TPE). The textural properties of FL-PFP were evaluated by the gas uptake properties using N₂ and CO₂ isotherms. The BET surface area estimates according to N₂ uptake ranged from 100–150 m² g⁻¹, while a lower range of values (20–30 m² g⁻¹) was estimated for CO₂ uptake. Model nitroarenes such as trinitrophenol (TNP) and nitrobenzene (NB) were shown to induce turn-off of the fluorescence emission of the polymer framework at concentrations near 50 nM with ca. 50% fluorescence quenching upon TNP adsorption and detection. The strong donor–acceptor interaction between the nitroarenes and the TPE reporter unit led to fluorescence quenching of FL-PFP upon nitroarene adsorption. The fluorescence lifetime (τ) for FL-PFP (τ = 3.82 ns) was obtained along with a quantum yield estimate of 0.399 relative to quinine sulphate. The β-CD terpolymer reported herein has significant potential for monitoring the rapid and controlled detection of nitroarenes (TNP and NB) in aquatic environments and other complex media.

Permanent porosity plays a key role in fluorescent-based polymers with “on–off” emissive properties due to the role of guest adsorption at accessible fluorophore sites of the polymer framework.

Poly(thymine)-CuNPs: Bimodal Methodology for Accurate and Selective Detection of TNT at Sub-PPT Levels

Accurate, sensitive, and selective detection of explosives is of vital importance in antiterrorism and homeland security. Fluorescence sensors are prevalent for sensitive and fast in-field explosive detection but are sometimes compromised by accuracy and stability due to the similar structures of explosives, photobleaching, and complex sample matrixes. Herein, we developed a first bimodal methodology capable of both sensitive in-field fluorescence detection and accurate laboratory mass spectrometric quantification of 2,4,6-trinitrotoluene (TNT) by utilizing the characteristic fluorescent and mass spectrometric response of copper nanoparticles (CuNPs). An excellent selectivity was also realized by involving aptamer recognition. The methodology is capable of detecting TNT at subpart per trillion (PPT) levels, with a detection limit of 0.32 pg mL^-1 by inductively coupled plasma mass spectrometry (ICPMS) and 0.17 ng mL^-1 by fluorimetry. The signal response was accurate and stable for at least 60 days by ICPMS. Thanks to the biospecificity of the aptamer, this bimodal methodology is potentially applicable to a large panel of explosives.

A small heterobifunctional ligand provides stable and water dispersible core-shell CdSe/ZnS quantum dots (QDs)

We describe a simple method to prepare water dispersible core-shell CdSe/ZnS quantum dots (QDs) 1 by capping QDs with a new thiol-containing heterobifunctional dicarboxylic ligand 4 (DHLA-EDADA). This ligand, obtained on a gram scale through a few synthetic steps, provides a compact layer on the QDs, whose hydrodynamic size in H2O is 15 nm ± 3 nm. The colloidal stability is dramatically enhanced with respect to the well-known (±) α-lipoic acid (DHLA). The ligand affinity towards QDs and the water dispersibility of nanocrystals 1 are addressed by the dithiol groups of DHLA, which chelate the zinc of the shell, and by the dicarboxylic groups of the ethylenediamine-N,N-diacetic acid (EDADA) residue, respectively. The effects of pH, buffer solutions, and biological medium on the stability of QDs 1 were assessed by monitoring the photoluminescence (PL) and hydrodynamic size over time. Highly fluorescent QD dispersions, stable over extended periods of time and over broad pH ranges and buffer types, were obtained. Furthermore, we show that the DHLA-EDADA ligand 4 also endows QDs with functional groups suitable for further conjugation and for metal ion detection. As a case study to illustrate the potential of our approach, we report the preparation and characterization of a highly luminescent orange light emitting polymer-QD 1 composite film.

Ethylenediamine mediated luminescence enhancement of pollutant derivatized carbon quantum dots for intracellular trinitrotoluene detection: soot to shine

Vehicle-generated toxic pollutants are composed of gaseous smoke and particulate byproducts accumulated as a black substance at its exhaust. This particulate matter (soot) is utilized for the green synthesis of highly stable, non-toxic, environment friendly, carbon quantum dots (CQD). The CQDs are synthesized via the simple hydrothermal route in the absence (C1) and presence (C2) of oxidants. The as-synthesized CQDs are amine functionalized using ethylenediamine. The amine functionalized CQDs (C1N and C2N) are explored for trinitrotoluene detection. From transmission electron microscopy, the average size of C1 and C2 was found to be about 4.2 nm and 5.6 nm respectively. The incorporation of amine groups lead to an increase in quantum yields from 5.63% to 12.7% for C1 and from 3.25% to 8.48% for C2 QDs. A limit of detection (LOD) of 13 ppb was displayed by C1N while the LODs of 11 ppb and 4.97 ppb were delivered by C2N at λ ex 370 nm and λ ex 420 nm respectively. The Stern-Volmer constant for C1N is 2.02 × 106 M-1 while for C2N at λ ex 370 nm and λ ex 420 nm is 0.38 × 106 M-1 and 0.48 × 106 M-1 respectively. Furthermore, C1N presents high selectivity for TNT compared to C2N. Owing to their higher luminescence, C1N particles are successfully demonstrated for their applicability in intracellular TNT detection.

Quantum Dot-Based FRET Immunoassay for HER2 Using Ultrasmall Affinity Proteins

Engineered scaffold affinity proteins are used in many biological applications with the aim of replacing natural antibodies. Although their very small sizes are beneficial for multivalent nanoparticle conjugation and efficient Förster resonance energy transfer (FRET), the application of engineered affinity proteins in such nanobiosensing formats has been largely neglected. Here, it is shown that very small (≈6.5 kDa) histidine-tagged albumin-binding domain-derived affinity proteins (ADAPTs) can efficiently self-assemble to zwitterionic ligand-coated quantum dots (QDs). These ADAPT-QD conjugates are significantly smaller than QD-conjugates based on IgG, Fab', or single-domain antibodies. Immediate applicability by the quantification of the human epidermal growth factor receptor 2 (HER2) in serum-containing samples using time-gated Tb-to-QD FRET detection on the clinical benchtop immunoassay analyzer KRYPTOR is demonstrated here. Limits of detection down to 40 × 10^-12 m (≈8 ng mL^-1 ) are in a relevant clinical concentration range and outperform previously tested assays with antibodies, antibody fragments, and nanobodies.

Multiple Routes to Smart Nanostructured Materials from Diatom Microalgae: A Chemical Perspective

Diatoms are unicellular photosynthetic microalgae, ubiquitously diffused in both marine and freshwater environments, which exist worldwide with more than 100 000 species, each with different morphologies and dimensions, but typically ranging from 10 to 200 µm. A special feature of diatoms is their production of siliceous micro- to nanoporous cell walls, the frustules, whose hierarchical organization of silica layers produces extraordinarily intricate pore patterns. Due to the high surface area, mechanical resistance, unique optical features, and biocompatibility, a number of applications of diatom frustules have been investigated in photonics, sensing, optoelectronics, biomedicine, and energy conversion and storage. Current progress in diatom-based nanotechnology relies primarily on the availability of various strategies to isolate frustules, retaining their morphological features, and modify their chemical composition for applications that are not restricted to those of the bare biosilica produced by diatoms. Chemical or biological methods that decorate, integrate, convert, or mimic diatoms' biosilica shells while preserving their structural features represent powerful tools in developing scalable, low-cost routes to a wide variety of nanostructured smart materials. Here, the different approaches to chemical modification as the basis for the description of applications relating to the different materials thus obtained are presented.

Selective sensing of 2,4,6-trinitrophenol (TNP) in aqueous media with "aggregation-induced emission enhancement" (AIEE)-active iridium(iii) complexes

A series of new phosphorescent cyclometalated iridium(iii) complexes which possess aggregation-induced emission enhancement (AIEE) detect 2,4,6-trinitrophenol (TNP) selectively with high quenching constants in aqueous media. The sensing mechanism was systematically investigated by mass spectrometry, ¹H and ¹⁹F NMR spectroscopy. X-ray crystal structure analysis reveals an O-HO interaction between TNP and the ancillary ligand which explains the high selectivity for TNP compared to other nitro-aromatics.

Planar Is Better: Monodisperse Three-Layered MoS2 Quantum Dots as Fluorescent Reporters for 2,4,6-Trinitrotoluene Sensing in Environmental Water and Luggage Cases

In this study, we present a simple but effective fluorescent system for highly sensitive and versatile sensing of 2,4,6-trinitrotoluene (TNT) using few layered planar MoS₂ quantum dots (QDs) as reporters. Excitation-independent emitting MoS₂ QDs were first fabricated by using the proposed ultrasonic-hydrothermal-based top-down method assisted by carbon-free hydroxylamine hydrochloride. The obtained pristine MoS₂ QDs were then modified with cysteine for introducing amino groups as TNT binding sites. The as-prepared MoS₂ QDs possess a planar structure, which can more adequately interact with flat aromatic TNT molecules due to π-π attraction and decreased steric effects, compared with traditional spherical/quasi-spherical QDs. As a result, they exhibit extremely high sensitivity for TNT sensing (1 nM and 2 ng for solution and substrate assay, respectively). The common ions containing in environmental water samples do not interfere with the sensing. Furthermore, the QDs-decorated test paper shows an instantaneous (within 1 min) response to trace amounts of deposited TNT, and the fluorescence quenching can even be well-visualized by the naked eye. Because of favorable analytical performances, the proposed MoS₂ QDs-based TNT sensing system has potential applications in both environmental water monitoring and security screening.