Monitoring Dopamine Release from Single Living Vesicles with Nanoelectrodes

Reconstruction of Vesicle Assemblies with DNA Nanorulers for Resolving Heterogeneity of Vesicles in Live Cells

Nanoscale vesicles such as synaptic vesicles play a pivotal role in efficient interneuronal communications in vivo. However, the coexistence of single vesicle and vesicle clusters in living cells increases the heterogeneity of vesicle populations, which largely complicates the quantitative analysis of the vesicles. The high spatiotemporal monitoring of vesicle assemblies is currently incompletely resolved. Here, this work uses synthetic vesicles and DNA nanorulers to reconstruct in vitro the vesicle assemblies that mimic vesicle clusters in living cells. DNA nanorulers program the lateral distance of vesicle assemblies from 3 to 10 nm. This work uses the carbon fiber nanoelectrode (CFNE) to amperometric monitor artificial vesicle assemblies with sub-10 nm interspaces, and obtain a larger proportion of complex events. This work resolves the heterogeneity of individual vesicle release kinetics in PC12 cells with the temporal resolution down to ≈0.1 ms. This work further analyzes the aggregation state of intracellular vesicles and the exocytosis of living cells with electrochemical vesicle cytometry. The results indicate that the exocytosis of vesicle clusters is critically dependent on the size of clusters. This technology has the potential as a tool to shed light on the heterogeneity analysis of vesicle populations.

Amperometric Identification of Single Exosomes and Their Dopamine Contents Secreted by Living Cells

Dopamine (DA) is an important neurotransmitter, which not only participates in the regulation of neural processes but also plays critical roles in tumor progression and immunity. However, direct identification of DA-containing exosomes, as well as quantification of DA in single vesicles, is still challenging. Here, we report a nanopipette-assisted method to detect single exosomes and their dopamine contents via amperometric measurement. The resistive-pulse current measured can simultaneously provide accurate information of vesicle translocation and DA contents in single exosomes. Accordingly, DA-containing exosomes secreted from HeLa and PC12 cells under different treatment modes successfully detected the DA encapsulation efficiency and the amount of exosome secretion that distinguish between cell types. Furthermore, a custom machine learning model was constructed to classify the exosome signals from different sources, with an accuracy of more than 99%. Our strategy offers a useful tool for investigating single exosomes and their DA contents, which facilitates the analysis of DA-containing exosomes derived from other untreated or stimulated cells and may open up a new insight to the research of DA biology.

Nanoelectrochemistry reveals how soluble Aβ42 oligomers alter vesicular storage and release of glutamate

Glutamate (Glu) is the major excitatory transmitter in the nervous system. Impairment of its vesicular release by β-amyloid (Aβ) oligomers is thought to participate in pathological processes leading to Alzheimer's disease. However, it remains unclear whether soluble Aβ42 oligomers affect intravesicular amounts of Glu or their release in the brain, or both. Measurements made in this work on single Glu varicosities with an amperometric nanowire Glu biosensor revealed that soluble Aβ42 oligomers first caused a dramatic increase in vesicular Glu storage and stimulation-induced release, accompanied by a high level of parallel spontaneous exocytosis, ultimately resulting in the depletion of intravesicular Glu content and greatly reduced release. Molecular biology tools and mouse models of Aβ amyloidosis have further established that the transient hyperexcitation observed during the primary pathological stage is mediated by an altered behavior of VGLUT1 responsible for transporting Glu into synaptic vesicles. Thereafter, an overexpression of Vps10p-tail-interactor-1a, a protein that maintains spontaneous release of neurotransmitters by selective interaction with t-SNAREs, resulted in a depletion of intravesicular Glu content, triggering advanced-stage neuronal malfunction. These findings are expected to open perspectives for remediating Aβ42-induced neuronal hyperactivity and neuronal degeneration.

Nano- and Microsensors for In Vivo Real-Time Electrochemical Analysis: Present and Future Perspectives

Electrochemical nano- and microsensors have been a useful tool for measuring different analytes because of their small size, sensitivity, and favorable electrochemical properties. Using such sensors, it is possible to study physiological mechanisms at the cellular, tissue, and organ levels and determine the state of health and diseases. In this review, we highlight recent advances in the application of electrochemical sensors for measuring neurotransmitters, oxygen, ascorbate, drugs, pH values, and other analytes in vivo. The evolution of electrochemical sensors is discussed, with a particular focus on the development of significant fabrication schemes. Finally, we highlight the extensive applications of electrochemical sensors in medicine and biological science.

Carbon nanospike coated nanoelectrodes for measurements of neurotransmitters

Carbon nanoelectrodes enable the detection of neurotransmitters at the level of single cells, vesicles, synapses and small brain structures. Previously, the etching of carbon fibers and 3D printing based on direct laser writing have been used to fabricate carbon nanoelectrodes, but these methods lack the ability of mass manufacturing. In this paper, we mass fabricate carbon nanoelectrodes by growing carbon nanospikes (CNSs) on metal wires. CNSs have a short, dense and defect-rich surface that produces remarkable electrochemical properties, and they can be mass fabricated on almost any substrate without using catalysts. Tungsten wires and niobium wires were electrochemically etched in batch to form sub micrometer sized tips, and a layer of CNSs was grown on the metal wires using plasma-enhanced chemical vapor deposition (PE-CVD). The thickness of the CNS layer was controlled by the deposition time, and a thin layer of CNSs can effectively cover the entire metal surface while maintaining the tip size within the sub micrometer scale. The etched tungsten wires produced tapered conical nanotips, while the etched niobium wires were long and thin. Both showed excellent sensitivity for the detection of outer sphere ruthenium hexamine and the inner sphere test compound ferricyanide. The CNS nanosensors were used for the measurement of dopamine, serotonin, ascorbic acid and DOPAC with fast-scan cyclic voltammetry. The CNS nanoelectrodes had a large surface area and numerous defect sites, which improved the sensitivity, electron transfer kinetics and adsorption. Finally, the CNS nanoelectrodes were compared with other nanoelectrode fabrication methods, including flame etching, 3D printing, and nanopipettes, which are slower to make and more difficult for mass fabrication. Thus, CNS nanoelectrodes are a promising strategy for the mass fabrication of nanoelectrode sensors for neurotransmitters.

Reconstructing Soma-Soma Synapse-like Vesicular Exocytosis with DNA Origami

Cell-cell communications exhibit distinct physiological functions in immune responses and neurotransmitter signaling. Nevertheless, the ability to reconstruct a soma-soma synapse-like junction for probing intercellular communications remains difficult. In this work, we develop a DNA origami nanostructure-based method for establishing cell conjugation, which consequently facilitates the reconstruction of a soma-soma synapse-like junction. We demonstrate that intercellular communications including small molecule and membrane vesicle exchange between cells are maintained in the artificially designed synapse-like junction. By inserting the carbon fiber nanometric electrodes into the soma-soma synapse-like junction, we accomplish the real-time monitoring of individual vesicular exocytotic events and obtain the information on vesicular exocytosis kinetics via analyzing the parameters of current spikes. This strategy provides a versatile platform to study synaptic communications.

Quantitative Nano-amperometric Measurement of Intravesicular Glutamate Content and its Sub-Quantal Release by Living Neurons

Quantitative measurements of intravesicular glutamate (Glu) and of transient exocytotic release contents directly from individual living neurons are highly desired for understanding the mechanisms (full or sub-quantal release?) of synaptic transmission and plasticity. However, this could not be achieved so far due to the lack of adequate experimental strategies relying on selective and sensitive Glu nanosensors. Herein, we introduce a novel electrochemical Glu nanobiosensor based on a single SiC nanowire that can selectively measure in real-time Glu fluxes released via exocytosis by large Glu vesicles (ca. 125 nm diameter) present in single hippocampal axonal varicosities as well as their intravesicular content before exocytosis. These measurements revealed a sub-quantal release mode in living hippocampal neurons, viz., only ca. one third to one half of intravesicular Glu molecules are released by individual vesicles during exocytotic events. Importantly, this fraction remained practically the same when hippocampal neurons were pretreated with L-Glu-precursor L-glutamine, while it significantly increased after zinc treatment, although in both cases the intravesicular contents were drastically affected.

Solid-phase microextraction integrated nanobiosensors for the serial detection of cytoplasmic dopamine in a single living cell

Dopamine participates in many physiological and pathological processes. Dynamic monitoring of dopamine levels in the cytoplasm of a single living cell reflects not only the functional state of dopamine synthesis factors but also the processes of related neurodegenerative diseases. Due to the low content of cytoplasmic dopamine and the difficulty to keep cells alive during the operating process, the detection of cytoplasmic dopamine is still challenging. Herein, a solid-phase microextraction (SPME) technique integrated nanobiosensor was employed to trace and quantify dopamine concentration fluctuations in the cytoplasm of a single living cell. We designed a polypyrrole modified carbon fiber nanoprobe as a bifunctional nanoprobe that can extract cytoplasmic dopamine and then perform electrochemical detection. This bifunctional nanoprobe can detect 10 pmol/L extracted dopamine and detected a 60% decrease of the cytoplasmic dopamine concentration in a single living cell by K⁺ stimulation. This study allowed for the first time serially detecting cytoplasmic dopamine while keeping the target cell alive, which might yield a new method for research on dopamine neurotoxicity and the related drug action mechanisms for neurodegenerative disease.

Live-Cell Imaging of Neurotransmitter Release with a Cell-Surface-Anchored DNA-Nanoprism Fluorescent Sensor

Neurotransmitters are essential chemical mediators for neuronal communication in variable neuromodulations. However, the progress of neuroscience is hampered by the shortage of suitable sensors to track neurotransmitters with high spatial and temporal resolution. Here, we introduce a self-assembled DNA-nanoprism fluorescent probe capable of nongenetically engineering the cell surface for ultrasensitive imaging of the neurotransmitter release at a single live-cell level. The DNA-nanoprism structure conjugated with three cholesterol tails enables the probe to rapidly and stably anchor on the cell surface within 10 min. The in situ detection of neurotransmitters is achieved by equipping the DNA-nanoprism with an aptamer-based "turn-on" fluorescent sensory module for the transmitter of interest. In a proof-of-concept study, we directly visualized the transient dopamine (DA) release on the cell surface with selective responsivity and high spatiotemporal precision and further explored the dynamic correlation between DA release and calcium influx triggered by high K⁺. This study provides a robust and sensitive tool for cell-surface-targeted imaging of neuromodulations, which might open up a new avenue to improve the understanding of neurochemistry and advance neuroscience research.

Electroless deposition of gold nanoparticles on carbon nanopipette electrode for electrochemical detection of catecholamines released from PC12 cells

An electroless deposition method is reported for the fabrication of gold nanoparticles (Au NPs) modified carbon nanopipette electrode (CNPE) for sensitive electrochemical detection of dopamine (DA) in aqueous solution and catecholamines released from PC12 cells. A CNPE is fabricated by chemical vapor deposition with a carbon layer onto nanocapillary and then contacted with copper (Cu) wire. Cu wire of CNPE is able to serve as reducing agent for electroless deposition of Au NPs on the CNPE because the potential of Cu²⁺/Cu is more negative than that of AuCl₄^-/Au. The method is simple, time-saving, and environmentally friendly. Field emission scanning electron microscopy, energy-dispersive X-ray analysis, and electrochemical techniques confirm the successful fabrication of the Au NPs/CNPE. Furthermore, Au NPs/CNPE exhibits a good sensing activity for DA oxidation with a wide linear determination range of 0.1-8 μmol/L and a low detection limit of 6 nmol/L. The Au NPs/CNPE can be potentially applied for measurement of catecholamines released from PC12 cells. This present work is believed to be beneficial to the design and development of active metal catalysts onto nanoelectrodes for the detection of electroactive biological molecules in living cells.Graphical abstract An electroless deposition method was developed for the fabrication of gold nanoparticles onto the carbon nanopipette electrode, which was served as an enhanced electrochemical sensing platform for highly sensitive detection of dopamine with a linear range of 0.1-8 μmol/L and a detection limit of 6 nmol/L, and was also applied in the detection of catecholamines released from PC12 cells.

3D-Printed Carbon Nanoelectrodes for In Vivo Neurotransmitter Sensing

Direct laser writing, a nano 3D-printing approach, has enabled fabrication of customized carbon microelectrode sensors for neurochemical detection. However, to detect neurotransmitters in tiny biological organisms or synapses, submicrometer nanoelectrodes are required. In this work, we used 3D printing to fabricate carbon nanoelectrode sensors. Customized structures were 3D printed and then pyrolyzed, resulting in free-standing carbon electrodes with nanotips. The nanoelectrodes were insulated with atomic layer deposition of Al₂O₃ and the nanotips were polished by a focused ion beam to form 600 nm disks. Using fast-scan cyclic voltammetry, the electrodes successfully detected stimulated dopamine in the adult fly brain, demonstrating that they are robust and sensitive enough to use in tiny biological systems. This work is the first demonstration of 3D printing to fabricate free-standing carbon nanoelectrode sensors and will enable batch fabrication of customized nanoelectrode sensors with precise control and excellent reproducibility.

Microelectrode-Based Electrochemical Sensing Technology for in Vivo Detection of Dopamine: Recent Developments and Future Prospects

Dopamine (DA) is an essential type of neurotransmitter in the central nervous system. DA neurons usually exist as nuclei which are mainly found in the ventral tegmental area (VTN) and substantia nigra pars compacta (SNc). Parkinson's disease, epilepsy, schizophrenia and other diseases are all related to the abnormal metabolism of DA. Compared with traditional DA detection methods such as spectrophotometry and electrophoresis, electrochemical sensing technology has high detection efficiency, high sensitivity, fast and convenient real-time detection, which is recognized as the most effective method for measuring neurotransmitters in vivo. The working electrode of an electrochemical sensor can be generally divided into the conventional electrode and the microelectrode according to its size. The microelectrode shows excellent properties such as high sensitivity, high temporal resolution, and high spatial resolution while detecting DA, which makes it possible to detect neurotransmitters in vivo. In order to further investigate the role of DA in regulating action, emotion, and cognition, and to further clarify the relationship between DA abnormalities or lack and neurological diseases such as Parkinson, more and more researchers apply microelectrode-based electrochemistry sensing technology to detect DA in vivo. This article reviews recent applications of microelectrodes and the latest researches in DA detection in vivo, focusing on the following three types of microelectrodes: (1) non-nanomaterial-modified carbon fiber microelectrodes (CFE); (2) nanomaterial-modified microelectrodes; (3) microelectrode arrays (MEA).

Nanocage-confined electrochemiluminescence for the detection of dopamine released from living cells

Herein we report an electrochemiluminescent nanocage array (ENA) in which luminophores are physically confined. The ENA can function as a solid sensor for the detection of dopamine released from living cells on the basis of its quenching effect on the ECL signal.

Optical Tracking of Nanometer-Scale Cellular Membrane Deformation Associated with Single Vesicle Release

Exocytosis involves interactions between secretory vesicles and the plasma membrane. Studying the membrane response is thus critical to understand this important cellular process and to differentiate different mediator release patterns. Here we introduce a label-free optical imaging method to detect the vesicle-membrane-interaction-induced membrane deformation associated with single exocytosis in mast cells. We show that the plasma membrane expands by a few tens of nanometers accompanying each vesicle-release event, but the dynamics of the membrane deformation varies from cell to cell, which reflect different exocytosis processes. Combining the temporal and spatial information allows us to resolve complex vesicle-release processes, such as two vesicle-release events that occur closely in time and location. Simultaneous following a vesicle release with fluorescence and membrane deformation tracking further allows us to determine the propagation speed of the vesicle-release-induced membrane deformation along the cell surface, which has an average value of 5.2 ± 1.8 μm/s.

Conductive Polymer Coated Scaffold to Integrate 3D Cell Culture with Electrochemical Sensing

Remarkable progresses have been made in electrochemical monitoring of living cells based on one-dimensional (1D) or two-dimensional (2D) sensors, but the cells cultured on 2D substrate under these circumstances are departed from their three-dimensional (3D) microenvironments in vivo. Significant advances have been made in developing 3D culture scaffolds to simulate the 3D microenvironment yet most of them are insulated, which greatly restricts their application in electrochemical sensing. Herein, we propose a versatile strategy to endow 3D insulated culture scaffolds with electrochemical performance while granting their biocompatibility through conductive polymer coating. More specifically, 3D polydimethylsiloxane scaffold is uniformly coated by poly(3,4-ethylenedioxythiophene) and further modified by platinum nanoparticles. The integrated 3D device demonstrates desirable biocompatibility for long-term 3D cell culture and excellent electrocatalytic ability for electrochemical sensing. This allows real-time monitoring of reactive oxygen species release from cancer cells induced by a novel potential anticancer drug and reveals its promising application in cancer treatment. This work provides a new idea to construct 3D multifunctional electrochemical sensors, which will be of great significance for physiological and pathological research.

Amperometric monitoring of vesicular dopamine release using a gold nanocone electrode

We report a facile approach to fabricate a gold nanocone electrode for monitoring dopamine release from individual vesicles.

Stepping gating of ion channels on nanoelectrode via DNA hybridization for label-free DNA detection

Natural ion channels on cell membrane can gate the transport of ions and molecules by the conformational alteration of transmembrane proteins to regulate the normal physiological activities of cells. Inspired by the similarity of the conformation change under specific stimuli, here we introduce an ion channel gating model on a single nanoelectrode by anchoring DNA-gated switches on the very nanotip of gold nanoelectrode to mimic the response-to-stimulus behaviors of ion channels on bio-membranes. The surface-tethered DNA ion channels can be switched on by the Watson-Crick base pairing, which can alter the conformation of the tethered DNA from lying state to upright state. And these conformational alterations of the anchored DNA switches can effectively gate the transport of potassium ferricyanide onto the electrode interface. By continuously initiating the gates with DNA of different concentrations, we achieved the stepping gating of ion channels on a single nanoelectrode. Further, we demonstrated that the ion gating system on nanoelectrode showed excellent sensing performance. For example, the response kinetic was very fast with the signal saturation time of ~1 min, the reproducibility of the OFF/ON switch was robust enough to sustain for two cycles, and simultaneously, the specificity was high enough to distinguish complementary DNA and noncomplementary DNA. When used for label-free DNA detection, the limit of detection can be as low as 10 pM. This study provides a promising avenue to achieve label free and real-time detection of multiple biomolecules.

Enhancing electrochemical detection of dopamine via dumbbell-like FePt-Fe3O4 nanoparticles

We synthesize dumbbell-like FePt-Fe₃O₄ nanoparticles (NPs) and study their electrocatalytic oxidation and sensing of dopamine (DA). The FePt and Fe₃O₄ NPs are strongly coupled in the dumbbell structure and as a result, the dumbbell FePt-Fe₃O₄ NPs show the best activity for DA oxidation with the DA detection limit reaching 1 nM. They are used successfully to monitor the DA concentration increase induced by K⁺-stimulation of PC12 cells. Our data show that an electrode modified with dumbbell-like FePt-Fe₃O₄ NPs can serve as the most sensitive probe for real-time quantitative detection of DA in a neurological environment.

Focused-Ion-Beam-Milled Carbon Nanoelectrodes for Scanning Electrochemical Microscopy

Nanoscale scanning electrochemical microscopy (SECM) has emerged as a powerful electrochemical method that enables the study of interfacial reactions with unprecedentedly high spatial and kinetic resolution. In this work, we develop carbon nanoprobes with high electrochemical reactivity and well-controlled size and geometry based on chemical vapor deposition of carbon in quartz nanopipets. Carbon-filled nanopipets are milled by focused ion beam (FIB) technology to yield a flat disk tip with a thin quartz sheath as confirmed by transmission electron microscopy. The extremely high electroactivity of FIB-milled carbon nanotips is quantified by enormously high standard electron-transfer rate constants of ≥10 cm/s for Ru(NH3)63+. The tip size and geometry are characterized in electrolyte solutions by SECM approach curve measurements not only to determine inner and outer tip radii of down to ~27 and ~38 nm, respectively, but also to ensure the absence of a conductive carbon layer on the outer wall. In addition, FIB-milled carbon nanotips reveal the limited conductivity of ~100 nm-thick gold films under nanoscale mass-transport conditions. Importantly, carbon nanotips must be protected from electrostatic damage to enable reliable and quantitative nanoelectrochemical measurements.

Recent advances in the development and application of nanoelectrodes

Nanoelectrodes have key advantages compared to electrodes of conventional size and are the tool of choice for numerous applications in both fundamental electrochemistry research and bioelectrochemical analysis. This Minireview summarizes recent advances in the development, characterization, and use of nanoelectrodes in nanoscale electroanalytical chemistry. Methods of nanoelectrode preparation include laser-pulled glass-sealed metal nanoelectrodes, mass-produced nanoelectrodes, carbon nanotube based and carbon-filled nanopipettes, and tunneling nanoelectrodes. Several new topics of their recent application are covered, which include the use of nanoelectrodes for electrochemical imaging at ultrahigh spatial resolution, imaging with nanoelectrodes and nanopipettes, electrochemical analysis of single cells, single enzymes, and single nanoparticles, and the use of nanoelectrodes to understand single nanobubbles.

Toward live-cell imaging of dopamine neurotransmission with fluorescent neurotransmitter analogues

We report a novel 'fluorescent dopamine' that possesses essential features of natural dopamine. Our method is simple and is readily extended to monoamine neurotransmitters such as L-norepinephrine, serotonin and GABA, providing a more practical approach. Because of its compatibility with sensitive fluorescent measurements, we envisage that our approach will have a broad range of applications in neural research.

Electro-triggering and electrochemical monitoring of dopamine exocytosis from a single cell by using ultrathin electrodes based on Au nanowires

A sophisticated set of an Au nanowire (NW) stimulator-Au NW detector system is developed for electrical cell stimulation and electrochemical analysis of subsequent exocytosis with very high spatial resolution. Dopamine release from a rat pheochromocytoma cell is more stimulated by a more negative voltage pulse. This system could help to improve the therapeutic efficacy of electrotherapies by providing valuable information on their healing mechanism.

A miniaturized electrochemical device integrating a biconical microchannel and carbon fiber disk ultramicroelectrode

A simple, cheap and practicable miniaturized electrochemical device was developed based on a biconical microchannel.

Electrochemical nanoprobes for the chemical detection of neurotransmitters

Neurotransmitters, acting as chemical messengers, play an important role in neurotransmission, which governs many functional aspects of nervous system activity. Electrochemical probes have proven a very useful technique to study neurotransmission, especially to quantify and qualify neurotransmitters. With the emerging interests in probing neurotransmission at the level of single cells, single vesicles, as well as single synapses, probes that enable detection of neurotransmitters at the nanometer scale become vitally important. Electrochemical nanoprobes have been successfully employed in nanometer spatial resolution imaging of single nanopores of Si membrane and single Au nanoparticles, providing both topographical and chemical information, thus holding great promise for nanometer spatial study of neurotransmission. Here we present the current state of electrochemical nanoprobes for chemical detection of neurotransmitters, focusing on two types of nanoelectrodes, i.e. carbon nanoelectrode and nano-ITIES pipet electrode.

Real-time Monitoring of Discrete Synaptic Release Events and Excitatory Potentials within Self-reconstructed Neuromuscular Junctions

Chemical synaptic transmission is central to the brain functions. In this regard, real-time monitoring of chemical synaptic transmission during neuronal communication remains a great challenge. In this work, in vivo-like oriented neural networks between superior cervical ganglion (SCG) neurons and their effector smooth muscle cells (SMC) were assembled in a microfluidic device. This allowed amperometric detection of individual neurotransmitter release events inside functional SCG-SMC synapse with carbon fiber nanoelectrodes as well as recording of postsynaptic potential using glass nanopipette electrodes. The high vesicular release activities essentially involved complex events arising from flickering fusion pores as quantitatively established based on simulations. This work allowed for the first time monitoring in situ chemical synaptic transmission under conditions close to those found in vivo, which may yield important and new insights into the nature of neuronal communications.

A review of flux considerations for in vivo neurochemical measurements

The mass transport or flux of neurochemicals in the brain and how this flux affects chemical measurements and their interpretation is reviewed. For all endogenous neurochemicals found in the brain, the flux of each of these neurochemicals exists between sources that produce them and the sites that consume them all within μm distances. Principles of convective-diffusion are reviewed with a significant emphasis on the tortuous paths and discrete point sources and sinks. The fundamentals of the primary methods of detection, microelectrodes and microdialysis sampling of brain neurochemicals are included in the review. Special attention is paid to the change in the natural flux of the neurochemicals caused by implantation and consumption at microelectrodes and uptake by microdialysis. The detection of oxygen, nitric oxide, glucose, lactate, and glutamate, and catecholamines by both methods are examined and where possible the two techniques (electrochemical vs. microdialysis) are compared. Non-invasive imaging methods: magnetic resonance, isotopic fluorine MRI, electron paramagnetic resonance, and positron emission tomography are also used for different measurements of the above-mentioned solutes and these are briefly reviewed. Although more sophisticated, the imaging techniques are unable to track neurochemical flux on short time scales, and lack spatial resolution. Where possible, determinations of flux using imaging are compared to the more classical techniques of microdialysis and microelectrodes.

Development of Au Disk Nanoelectrode Down to 3 nm in Radius for Detection of Dopamine Release from a Single Cell

A Au disk nanoelectrode down to 3 nm in radius was developed by a facile and reliable method and successfully applied for monitoring dopamine release from single living vesicles. A fine etched Au wire was coated with cathodic electrophoretic paint followed by polyimide, which retracted from the tip end during curing to expose the Au nanotip. By cyclic voltammetric scanning the above tip in 0.5 M KCl, the transformation of a core-shaped apex into a geometrically well-defined Au disk nanoelectrode with different dimensions can be controllably and reproducibly achieved. Scanning electron microscopy, transmission electron microscopy, and steady-state voltammetry were used to determine the size of nanoelectrodes. The results showed that the specific etching and insulation method not only avoids the use of toxic etching solution and the uncontrollable treatment to expose the tip but also makes possible the controllable and reproducible fabrication of Au disk nanoelectrode down to 3 nm in radius. The nanoelectrodes with well-demonstrated analytical performance were further applied for amperometrically monitoring dopamine release from single rat pheochromacytoma cells with high spatial resolution.

Toward the development of smart and low cost point-of-care biosensors based on screen printed electrodes

Screen printing technology provides a cheap and easy means to fabricate disposable electrochemical devices in bulk quantities which are used for rapid, low-cost, on-site, real-time and recurrent industrial, pharmaceutical or environmental analyses. Recent developments in micro-fabrication and nano-characterization made it possible to screen print reproducible feature on materials including plastics, ceramics and metals. The processed features forms screen-printed disposable biochip (SPDB) upon the application of suitable bio-chemical recognition receptors following appropriate methods. Adequacy of biological and non-biological materials is the key to successful biochip development. We can further improve recognition ability of SPDBs by adopting new screen printed electrode (SPE) configurations. This review covers screen-printing theory with special emphasis on the technical impacts of SPE architectures, surface treatments, operational stability and signal sensitivity. The application of SPE in different areas has also been summarized. The article aims to highlight the state-of-the-art of SPDB at the laboratory scale to enable us in envisaging the deployment of emerging SPDB technology on the commercial scale.

Nanoelectrode for amperometric monitoring of individual vesicular exocytosis inside single synapses

Chemical neurotransmission occurs at chemical synapses and endocrine glands, but up to now there was no means for direct monitoring of neurotransmitter exocytosis fluxes and their precise kinetics from inside an individual synapse. The fabrication of a novel finite conical nanoelectrode is reported perfectly suited in size and electrochemical properties for probing amperometrically inside what appears to be single synapses and monitoring individual vesicular exocytotic events in real time. This allowed obtaining direct and important physiological evidences which may yield important and new insights into the nature of synaptic communications.

Fabrication of metal nanoelectrodes by interfacial reactions

Despite great improvements in the past decades, the controllable fabrication of metal nanoelectrodes still remains very challenging. In this work, a simple and general way to fabricate metal nanoelectrodes (Ag, Au, and Pt) is developed. On the basis of interfacial reactions at nano-liquid/liquid interfaces supported at nanopipettes, the nanoparticles can be formed in situ and have been used to block the orifices of pipettes to make nanoelectrodes. The effect of the driving force for interfacial reaction at the liquid/liquid interface, the ratio of redox species in organic and aqueous phases, and the surface charge of the inner wall of a pipette have been studied. The fabricated nanoelectrodes have been characterized by scanning electron microscopy (SEM) and electrochemical techniques. A silver electrode with about 10 nm in radius has been employed as the scanning electrochemical microscopy (SECM) probe to explore the thickness of a water/nitrobenzene (W/NB) interface, and this value is equal to 0.8 ± 0.1 nm (n = 5). This method of fabrication of nanoelectrodes can be extended to other metal or semiconductor electrodes.

Nonergodicity in nanoscale electrodes

The response of nanoscale electrodes displays deviations from conventional voltammetry theory that include a reduction in the limiting current and enhanced current fluctuations. We study the power spectra of these fluctuations in well characterized conical electrodes with radii between 2 and 10 nm. The fluctuations are found to display non-trivial power laws. We propose a model based on reversible adsorption of the redox species onto the nanoelectrode. This model is consistent with the non-stationary character of both the limiting current and the adsorption of molecules onto metal electrodes. Our model predicts the electrochemical reaction is nonergodic and sets fundamental limits on the sensitivity of uncoated nanoelectrodes.