Catalytic Reaction Mechanism of Homogentisate Dioxygenase: A Hybrid DFT Study

Proteogenomic Characterization of Pseudomonas veronii SM-20 Growing on Phenanthrene as Only Carbon and Energy Source

In this study, we conducted an extensive investigation of the biodegradation capabilities and stress response of the newly isolated strain Pseudomonas veronii SM-20 in order, to assess its potential for bioremediation of sites contaminated with polycyclic aromatic hydrocarbons (PAHs). Initially, phenotype microarray technology demonstrated the strain's proficiency in utilizing various carbon sources and its resistance to certain stressors. Genomic analysis has identified numerous genes involved in aromatic hydrocarbon metabolism. Biodegradation assay analyzed the depletion of phenanthrene (PHE) when it was added as a sole carbon and energy source. We found that P. veronii strain SM-20 degraded approximately 25% of PHE over a 30-day period, starting with an initial concentration of 600 µg/mL, while being utilized for growth. The degradation process involved PHE oxidation to an unstable arene oxide and 9,10-phenanthrenequinone, followed by ring-cleavage. Comparative proteomics provided a comprehensive understanding of how the entire proteome responded to PHE exposure, revealing the strain's adaptation in terms of aromatic metabolism, surface properties, and defense mechanism. In conclusion, our findings shed light on the promising attributes of P. veronii SM-20 and offer valuable insights for the use of P. veronii species in environmental restoration efforts targeting PAH-impacted sites.

Identification and characterization of methoxy- and dimethoxyhydroquinone 1,2-dioxygenase from Phanerochaete chrysosporium

White-rot fungi, such as Phanerochaete chrysosporium, are the most efficient degraders of lignin, a major component of plant biomass. Enzymes produced by these fungi, such as lignin peroxidases and manganese peroxidases, break down lignin polymers into various aromatic compounds based on guaiacyl, syringyl, and hydroxyphenyl units. These intermediates are further degraded, and the aromatic ring is cleaved by 1,2,4-trihydroxybenzene dioxygenases. This study aimed to characterize homogentisate dioxygenase (HGD)-like proteins from P. chrysosporium that are strongly induced by the G-unit fragment of vanillin. We overexpressed two homologous recombinant HGDs, PcHGD1 and PcHGD2, in Escherichia coli. Both PcHGD1 and PcHGD2 catalyzed the ring cleavage in methoxyhydroquinone (MHQ) and dimethoxyhydroquinone (DMHQ). The two enzymes had the highest catalytic efficiency (kcat/Km) for MHQ, and therefore, we named PcHGD1 and PcHGD2 as MHQ dioxygenases 1 and 2 (PcMHQD1 and PcMHQD2), respectively, from P. chrysosporium. This is the first study to identify and characterize MHQ and DMHQ dioxygenase activities in members of the HGD superfamily. These findings highlight the unique and broad substrate spectra of PcHGDs, rendering them attractive candidates for biotechnological applications.IMPORTANCEThis study aimed to elucidate the properties of enzymes responsible for degrading lignin, a dominant natural polymer in terrestrial lignocellulosic biomass. We focused on two homogentisate dioxygenase (HGD) homologs from the white-rot fungus, P. chrysosporium, and investigated their roles in the degradation of lignin-derived aromatic compounds. In the P. chrysosporium genome database, PcMHQD1 and PcMHQD2 were annotated as HGDs that could cleave the aromatic rings of methoxyhydroquinone (MHQ) and dimethoxyhydroquinone (DMHQ) with a preference for MHQ. These findings suggest that MHQD1 and/or MHQD2 play important roles in the degradation of lignin-derived aromatic compounds by P. chrysosporium. The preference of PcMHQDs for MHQ and DMHQ not only highlights their potential for biotechnological applications but also underscores their critical role in understanding lignin degradation by a representative of white-rot fungus, P. chrysosporium.

Cypyrafluone, a 4-Hydroxyphenylpyruvate Dioxygenase Inhibitor to Control Weed in Wheat Fields

As a bleaching herbicide, cypyrafluone was applied postemergence in wheat fields for annual weed control; especially, this herbicide possesses high efficacy against cool-season grass weed species such as Alopecurus aequalis and Alopecurus japonicus. In this study, the target of action of cypyrafluone on 4-hydroxyphenylpyruvate dioxygenase (HPPD) inhibition was confirmed. This herbicide caused severe foliar whitening symptoms at 5-7 days after treatment (DAT) and death of the whole plant within 10 DAT. Significant increases in phytoene content and significant decreases in kinds of carotenoid and chlorophyll pigments were observed. The content of chlorophyll pigments in cypyrafluone-treated Spirodela polyrhiza decreased upon the addition of homogentisic acid (HGA), which indicated that cypyrafluone prevents the HGA production, possibly by inhibiting the catalytic activity of 4-HPPD. Indeed, cypyrafluone strongly inhibited the catalytic activity of Arabidopsis thaliana HPPD produced by Escherichia coli, which was approximately 2 times less effective than mesotrione. In addition, overexpression of Oryza sativa HPPD in rice and A. thaliana both conferred a high tolerance level to cypyrafluone on them. Molecular docking found that cypyrafluone bonded well to the active site of the HPPD and formed a bidentate coordination interaction with the Fe²⁺ atom, with distances of 2.6 and 2.7 Å between oxygen atoms and the Fe²⁺ atom and a binding energy of -8.0 kcal mol^-1.

Structure-Function Relationship of Homogentisate 1,2-dioxygenase: Understanding the Genotype-Phenotype Correlations in the Rare Genetic Disease Alkaptonuria

Alkaptonuria (AKU), a rare genetic disorder, is characterized by the accumulation of homogentisic acid (HGA) in organs, which occurs because the homogentisate 1,2-dioxygenase (HGD) enzyme is not functional due to gene variants. Over time, HGA oxidation and accumulation cause the formation of the ochronotic pigment, a deposit that provokes tissue degeneration and organ malfunction. Here, we report a comprehensive review of the variants so far reported, the structural studies on the molecular consequences of protein stability and interaction, and molecular simulations for pharmacological chaperones as protein rescuers. Moreover, evidence accumulated so far in alkaptonuria research will be re-proposed as the bases for a precision medicine approach in a rare disease.

In vivo fluorescent screening for HPPD-targeted herbicide discovery

BACKGROUND

4-Hydroxyphenylpyruvate dioxygenase (HPPD), playing a critical role in vitamin E and plastoquinone biosynthesis in plants, has been recognized as one of the most important targets for herbicide discovery for over 30 years. Structure-based rational design of HPPD inhibitors has received more and more research interest. However, a critical challenge in the discovery of new HPPD inhibitors is the common inconsistency between molecular-level HPPD-based bioevaluation and the weed control efficiency in fields, due to the unpredictable biological processes of absorption, distribution, metabolism, and excretion.

RESULTS

In this study, we developed a fluorescent-sensing platform of efficient in vivo screening for HPPD-targeted herbicide discovery. The refined sensor has good capability of in situ real-time fluorescence imaging of HPPD in living cells and zebrafish. More importantly, it enabled the direct visible monitoring of HPPD inhibition in plants in a real-time manner.

CONCLUSION

We developed a highly efficient in vivo fluorescent screening method for HPPD-targeted herbicide discovery. This discovery not only offers a promising tool to advance HPPD-targeted herbicide discovery, but it also demonstrates a general path to develop the highly efficient, target-based, in vivo screening for pesticide discovery. © 2022 Society of Chemical Industry.

New insights and advances on pyomelanin production: from microbial synthesis to applications

Pyomelanin is a brown-black phenolic polymer and results from the oxidation of homogentisic acid (HGA) in the L-tyrosine pathway. As part of the research for natural and active ingredients issued from realistic bioprocesses, this work re-evaluates the HGA pigment and makes an updated inventory of its syntheses, microbial pathways, and properties, with tracks and recent advances for its large-scale production. The mechanism of the HGA polymerization is also well documented. In alkaptonuria, pyomelanin formation leads to connective tissue damages and arthritis, most probably due to the ROS issued from HGA oxidation. While UV radiation on human melanin may generate degradation products, pyomelanin is not photodegradable, is hyperthermostable, and has other properties better than the L-Dopa melanin. This review aims to raise awareness about the potential of this pigment for various applications, not only for skin coloring and protection but also for other cells, materials, and as a promising (semi)conductor for bioelectronics and energy.

Structure-Guided Discovery of Silicon-Containing Subnanomolar Inhibitor of Hydroxyphenylpyruvate Dioxygenase as a Potential Herbicide

4-Hydroxyphenylpyruvate dioxygenase (HPPD, EC 1.13.11.27) has been recognized as one of the most promising targets in the field of herbicide innovation considering the severity of weed resistance currently. In a persistent effort to develop effective HPPD-inhibiting herbicides, a structure-guided strategy was carried out to perform the structural optimization for triketone-quinazoline-2,4-diones, a novel HPPD inhibitor scaffold first discovered in our lab. Herein, starting from the crystal structure of Arabidopsis thaliana (At)HPPD complexed with 6-(2-hydroxy-6-oxocyclohex-1-ene-1-carbonyl)-1,5-dimethyl-3-(o-tolyl)quinazoline-2,4(1H,3H)-dione (MBQ), three subseries of quinazoline-2,4-dione derivatives were designed and prepared by optimizing the hydrophobic interactions between the side chain of the core structure at the R¹ position and the hydrophobic pocket at the active site entrance of AtHPPD. 6-(2-Hydroxy-6-oxocyclohex-1-ene-1-carbonyl)-1,5-dimethyl-3-(3-(trimethylsilyl)prop-2-yn-1-yl)quinazoline-2,4(1H,3H)-dione (60) with the best inhibitory activity against AtHPPD was identified to be the first subnanomolar-range AtHPPD inhibitor (K_i = 0.86 nM), which significantly outperformed that of the lead compound MBQ (K_i = 8.2 nM). Further determination of the crystal structure of AtHPPD in complex with compound 60 (1.85 Å) and the binding energy calculation provided a molecular basis for the understanding of its high efficiency. Additionally, the greenhouse assay indicated that 6-(2-hydroxy-6-oxocyclohex-1-ene-1-carbonyl)-1,5-dimethyl-3-propylquinazoline-2,4(1H,3H)-dione (28) and compound 60 showed acceptable crop safety against peanut and good herbicidal activity with a broad spectrum. Moreover, compound 28 also showed superior selectivity for wheat at the dosage of 120 g ai/ha and favorable herbicidal efficacy toward the gramineous weeds at the dosage of as low as 30 g ai/ha. We believe that compounds 28 and 60 have promising prospects as new herbicide candidates for wheat and peanut fields.

Mechanistic Insights into the Oxidative Rearrangement Catalyzed by the Unprecedented Dioxygenase ChaP Involved in Chartreusin Biosynthesis

ChaP is a non-heme iron-dependent dioxygenase belonging to the vicinal oxygen chelate (VOC) enzyme superfamily that catalyzes the final α-pyrone ring formation in the biosynthesis of chartreusin. In contrast to other common dioxygenases, for example, 2,3-catechol dioxygenase which uses the dioxygen molecule as the oxidant, ChaP requires the flavin-activated oxygen (O₂^2-) as the equivalent. Previous experiments showed that the ChaP-catalyzed ring rearrangement contains two successive C-C bond cleavages and one lactonization; however, the detailed reaction mechanism is unknown. In this work, on the basis of the recently obtained crystal structure of ChaP, the computational model was constructed and the catalytic mechanism of ChaP was explored by performing quantum mechanical/molecular mechanical (QM/MM) calculations. Our calculation results reveal that ChaP uses the proximal oxygen in iron-coordinated HOO^- to attack the carbonyl carbon of the substrate, whereas the previous proposal that Asp49 acts as a base to deprotonate the iron-coordinated HOO^- to generate O₂^2- is unlikely. In the first stage reaction, owing to the coordination of the substrate with iron, the substrate is activated by accepting an electron from iron and the resulting oxy-radical intermediate formed by O-O cleavage can easily trigger the ring rearrangement. In the final decarboxylation, the phenolic anion of the substrate cooperatively accepts the proton of iron-coordinated HOO^- to facilitate the attack of the distal oxygen, and the proton-coupled electron transfer (PCET) from the substrate to the Fe^IV═O plays a key role for the decarboxylation. These findings may provide useful information for understanding the ChaP-catalyzed oxidative rearrangement and other flavin-dependent non-heme dioxygenases.

Transient pockets as mediators of gas molecules routes inside proteins: The case study of dioxygen pathway in homogentisate 1,2-dioxygenase and its implication in Alkaptonuria development

Alkaptonuria (AKU) is an ultra-rare disease caused by mutations in homogentisate 1,2-dioxygenase (HGD) enzyme, characterized by the loss of enzymatic activity and the accumulation of its substrate, homogentisic acid (HGA) in different tissues, leading to ochronosis and organ degeneration. Although the pathological effects of HGD mutations are largely studied, less is known about the structure of the enzyme, in particular the pathways for dioxygen diffusion to the active site, required for the enzymatic reaction, are still uninvestigated. In the present project, the combination of two in silico techniques, Molecular Dynamics (MD) simulation and Implicit Ligand Sampling (ILS), was used to delineate gas diffusion routes in HGD enzyme. A route from the central opening of the hexameric structure of the enzyme to the back of the active site trough the protein moiety was identified as the path for dioxygen diffusion, also overlapping with a transient pocket, which then assumes an important role in dioxygen diffusion. Along the route the sequence location of the missense variant E401Q, responsible for AKU development, was also found, suggesting such mutation to be conducive of enzymatic activity loss by altering the flow dynamics of dioxygen. Our in silico approach allowed also to delineate the route of HGA substrate to the active site, until now only supposed.

The Polycyclic Aromatic Hydrocarbon (PAH) degradation activities and genome analysis of a novel strain Stenotrophomonas sp. Pemsol isolated from Mexico

Background

Stenotrophomonas are ubiquitous gram-negative bacteria, which can survive in a wide range of environments. They can use many substances for their growth and are known to be intrinsically resistant to many antimicrobial agents. They have been tested for biotechnological applications, bioremediation, and production of antimicrobial agents.

Method

Stenotrophomonas sp. Pemsol was isolated from a crude oil contaminated soil. The capability of this isolate to tolerate and degrade polycyclic aromatic hydrocarbons (PAH) such as anthraquinone, biphenyl, naphthalene, phenanthrene, phenanthridine, and xylene was evaluated in Bushnell Hass medium containing PAHs as the sole carbon sources. The metabolites formed after 30-day degradation of naphthalene by Pemsol were analyzed using Fourier Transform Infra-red Spectroscopic (FTIR), Ultra-Performance Liquid Chromatography-Mass Spectrometry (UPLC-MS) and Gas Chromatography-Mass Spectrometry (GC-MS). The genome of Pemsol was also sequenced and analyzed.

Results

Anthraquinone, biphenyl, naphthalene, phenanthrene, and phenanthridine except xylene can be used as sole carbon sources for Pemsol’s growth in Bushnell Hass medium. The degradation of naphthalene at a concentration of 1 mg/mL within 30 days was tested. A newly formed catechol peak and the disappearance of naphthalene peak detected on the UPLC-MS, and GC-MS analyses spectra respectively confirmed the complete degradation of naphthalene. Pemsol does not produce biosurfactant and neither bio-emulsify PAHs. The whole genome was sequenced and assembled into one scaffold with a length of 4,373,402 bp. A total of 145 genes involved in the degradation of PAHs were found in its genome, some of which are Pemsol-specific as compared with other 11 Stenotrophomonas genomes. Most specific genes are located on the genomic islands. Stenotrophomonas sp. Pemsol’s possession of few genes that are associated with bio-emulsification gives the genetic basis for its inability to bio-emulsify PAH. A possible degradation pathway for naphthalene in Pemsol was proposed following the analysis of Pemsol’s genome. ANI and GGDH analysis indicated that Pemsol is likely a new species of Stenotrophomonas. It is the first report on a complete genome sequence analysis of a PAH-degrading Stenotrophomonas. Stenotrophomonas sp. Pemsol possesses features that make it a good bacterium for genetic engineering and will be an excellent tool for the remediation of crude oil or PAH-contaminated soil.

A new pathway for naproxen utilisation by Bacillus thuringiensis B1(2015b) and its decomposition in the presence of organic and inorganic contaminants

Bacillus thuringiensis B1 (2015b) is a bacterial strain that is able to degrade naproxen. However, the potential effect of water co-contaminations on the degradation process and its pathway have not yet been evaluated. The results of our study show that in the presence of aromatic compounds, the B1 (2015b) strain utilised naproxen with an efficiency that was similar to what it was with no aromatic co-contaminations. In the presence of methanol, biodegradation of naproxen was inhibited, while the addition of ethanol increased the decomposition of naproxen. Among the metal ions that were tested, only cobalt (II) and cadmium (II) negatively affected the degradation of the drug. An analysis of the intermediates and enzymes that are engaged in degrading naproxen revealed that the key metabolites are O-desmethylnaproxen, which is the product of tetrahydrofolate-dependent O-demethylase activity, and salicylic acid. Salicylic acid can then be hydroxylated to catechol or gentisic acid or can be cleaved to 2-oxo-3,5-heptadienedioic acid. The high activity level of catechol 1,2-dioxygenase indicated that the main degradative pathway of naproxen in the B1 (2015b) strain is via catechol cleavage.

Mechanistic Insights into a Stibene Cleavage Oxygenase NOV1 from Quantum Mechanical/Molecular Mechanical Calculations

NOV1, a stilbene cleavage oxygenase, catalyzes the cleavage of the central double bond of stilbenes to two phenolic aldehydes, using a 4-His Fe(II) center and dioxygen. Herein, we use in-protein quantum mechanical/molecular mechanical (QM/MM) calculations to elucidate the reaction mechanism of the central double bond cleavage of phytoalexin resveratrol by NOV1. Our results showed that the oxygen molecule prefers to bind to the iron center in a side-on fashion, as suggested from the experiment. The quintet Fe-O2 complex with the side-on superoxo antiferromagnetic coupled to the resveratrol radical is identified as the reactive oxygen species. The QM/MM results support the dioxygenase mechanism involving a dioxetane intermediate with a rate-limiting barrier of 10.0 kcal mol-1. The alternative pathway through an epoxide intermediate is ruled out due to a larger rate-limiting barrier (26.8 kcal mol-1). These findings provide important insight into the catalytic mechanism of carotenoid cleavage oxygenases and also the dioxygen activation of non-heme enzymes.

Mechanistic insights into ring cleavage of hydroquinone by PnpCD from quantum mechanical/molecular mechanical calculations

QM/MM calculations for ring cleavage of hydroquinone by PnpCD show that Asn258 loses coordination to the iron when the reaction begins. The first-sphere Glu262 can act as an acid–base catalyst to lower the rate-limiting barrier.

Catechol 1,2-Dioxygenase is an Analogue of Homogentisate 1,2-Dioxygenase in Pseudomonas chlororaphis Strain UFB2

Catechol dioxygenases in microorganisms cleave catechol into cis-cis-muconic acid or 2-hydroxymuconic semialdehyde via the ortho- or meta-pathways, respectively. The aim of this study was to purify, characterize, and predict the template-based three-dimensional structure of catechol 1,2-dioxygenase (C12O) from indigenous Pseudomonas chlororaphis strain UFB2 (PcUFB2). Preliminary studies showed that PcUFB2 could degrade 40 ppm of 2,4-dichlorophenol (2,4-DCP). The crude cell extract showed 10.34 U/mL of C12O activity with a specific activity of 2.23 U/mg of protein. A 35 kDa protein was purified to 1.5-fold with total yield of 13.02% by applying anion exchange and gel filtration chromatography. The enzyme was optimally active at pH 7.5 and a temperature of 30 °C. The Lineweaver⁻Burk plot showed the v_max and K_m values of 16.67 µM/min and 35.76 µM, respectively. ES-MS spectra of tryptic digested SDS-PAGE band and bioinformatics studies revealed that C12O shared 81% homology with homogentisate 1,2-dioxygenase reported in other Pseudomonas chlororaphis strains. The characterization and optimization of C12O activity can assist in understanding the 2,4-DCP metabolic pathway in PcUFB2 and its possible application in bioremediation strategies.

Theoretical Study of the Mechanism of the Nonheme Iron Enzyme EgtB

EgtB is a nonheme iron enzyme catalyzing the C-S bond formation between γ-glutamyl cysteine (γGC) and N-α-trimethyl histidine (TMH) in the ergothioneine biosynthesis. Density functional calculations were performed to elucidate and delineate the reaction mechanism of this enzyme. Two different mechanisms were considered, depending on whether the sulfoxidation or the S-C bond formation takes place first. The calculations suggest that the S-O bond formation occurs first between the thiolate and the ferric superoxide, followed by homolytic O-O bond cleavage, very similar to the case of cysteine dioxygenase. Subsequently, proton transfer from a second-shell residue Tyr377 to the newly generated iron-oxo moiety takes place, which is followed by proton transfer from the TMH imidazole to Tyr377, facilitated by two crystallographically observed water molecules. Next, the S-C bond is formed between γGC and TMH, followed by proton transfer from the imidazole CH moiety to Tyr377, which was calculated to be the rate-limiting step for the whole reaction, with a barrier of 17.9 kcal/mol in the quintet state. The calculated barrier for the rate-limiting step agrees quite well with experimental kinetic data. Finally, this proton is transferred back to the imidazole nitrogen to form the product. The alternative thiyl radical attack mechanism has a very high barrier, being 25.8 kcal/mol, ruling out this possibility.

Cleavage mechanism of the aliphatic C–C bond catalyzed by 2,4′-dihydroxyacetophenone dioxygenase from Alcaligenes sp. 4HAP: a QM/MM study

Calculations suggest that the reactant complex may firstly undergo a triplet–quintet crossing to initiate the reaction and then the subsequent chemistry occurs on the multiple-states surfaces. The key C–C bond cleavage is accompanied by an insertion reaction of oxygen radical.

Insights into the Reaction Mechanism of Aromatic Ring Cleavage by Homogentisate Dioxygenase: A Quantum Mechanical/Molecular Mechanical Study

To elucidate the reaction mechanism of the ring cleavage of homogentisate by homogentisate dioxygenase, quantum mechanical/molecular mechanical (QM/MM) calculations were carried out by using two systems in different protonation states of the substrate C2 hydroxyl group. When the substrate C2 hydroxyl group is ionized (the ionized pathway), the superoxo attack on the substrate is the rate-limiting step in the catalytic cycle, with a barrier of 15.9 kcal/mol. Glu396 was found to play an important role in stabilizing the bridge species and its O-O cleavage product by donating a proton via a hydrogen-bonded water molecule. When the substrate C2 hydroxyl group is not ionized (the nonionized pathway), the O-O bond cleavage of the bridge species is the rate-limiting step, with a barrier of 15.3 kcal/mol. The QM/MM-optimized geometries for the dioxygen and alkylperoxo complexes using the nonionized model (for the C2 hydroxyl group) are in agreement with the experimental crystal structures, suggesting that the C2 hydroxyl group is more likely to be nonionized.

Quantum Mechanics/Molecular Mechanics Modeling of Enzymatic Processes: Caveats and Breakthroughs

Nature has developed large groups of enzymatic catalysts with the aim to transfer substrates into useful products, which enables biosystems to perform all their natural functions. As such, all biochemical processes in our body (we drink, we eat, we breath, we sleep, etc.) are governed by enzymes. One of the problems associated with research on biocatalysts is that they react so fast that details of their reaction mechanisms cannot be obtained with experimental work. In recent years, major advances in computational hardware and software have been made and now large (bio)chemical systems can be studied using accurate computational techniques. One such technique is the quantum mechanics/molecular mechanics (QM/MM) technique, which has gained major momentum in recent years. Unfortunately, it is not a black-box method that is easily applied, but requires careful set-up procedures. In this work we give an overview on the technical difficulties and caveats of QM/MM and discuss work-protocols developed in our groups for running successful QM/MM calculations.

A Long-Lived Fe(III)-(Hydroperoxo) Intermediate in the Active H200C Variant of Homoprotocatechuate 2,3-Dioxygenase: Characterization by Mössbauer, Electron Paramagnetic Resonance, and Density Functional Theory Methods

The extradiol-cleaving dioxygenase homoprotocatechuate 2,3-dioxygenase (HPCD) binds substrate homoprotocatechuate (HPCA) and O2 sequentially in adjacent ligand sites of the active site Fe(II). Kinetic and spectroscopic studies of HPCD have elucidated catalytic roles of several active site residues, including the crucial acid-base chemistry of His200. In the present study, reaction of the His200Cys (H200C) variant with native substrate HPCA resulted in a decrease in both kcat and the rate constants for the activation steps following O2 binding by >400 fold. The reaction proceeds to form the correct extradiol product. This slow reaction allowed a long-lived (t1/2 = 1.5 min) intermediate, H200C-HPCAInt1 (Int1), to be trapped. Mössbauer and parallel mode electron paramagnetic resonance (EPR) studies show that Int1 contains an S1 = 5/2 Fe(III) center coupled to an SR = 1/2 radical to give a ground state with total spin S = 2 (J > 40 cm(-1)) in Hexch = JŜ1·ŜR. Density functional theory (DFT) property calculations for structural models suggest that Int1 is a (HPCA semiquinone(•))Fe(III)(OOH) complex, in which OOH is protonated at the distal O and the substrate hydroxyls are deprotonated. By combining Mössbauer and EPR data of Int1 with DFT calculations, the orientations of the principal axes of the (57)Fe electric field gradient and the zero-field splitting tensors (D = 1.6 cm(-1), E/D = 0.05) were determined. This information was used to predict hyperfine splittings from bound (17)OOH. DFT reactivity analysis suggests that Int1 can evolve from a ferromagnetically coupled Fe(III)-superoxo precursor by an inner-sphere proton-coupled-electron-transfer process. Our spectroscopic and DFT results suggest that a ferric hydroperoxo species is capable of extradiol catalysis.

Structural Basis for Substrate and Oxygen Activation in Homoprotocatechuate 2,3-Dioxygenase: Roles of Conserved Active Site Histidine 200

Kinetic and spectroscopic studies have shown that the conserved active site residue His200 of the extradiol ring-cleaving homoprotocatechuate 2,3-dioxygenase (FeHPCD) from Brevibacterium fuscum is critical for efficient catalysis. The roles played by this residue are probed here by analysis of the steady-state kinetics, pH dependence, and X-ray crystal structures of the FeHPCD position 200 variants His200Asn, His200Gln, and His200Glu alone and in complex with three catecholic substrates (homoprotocatechuate, 4-sulfonylcatechol, and 4-nitrocatechol) possessing substituents with different inductive capacity. Structures determined at 1.35-1.75 Å resolution show that there is essentially no change in overall active site architecture or substrate binding mode for these variants when compared to the structures of the wild-type enzyme and its analogous complexes. This shows that the maximal 50-fold decrease in kcat for ring cleavage, the dramatic changes in pH dependence, and the switch from ring cleavage to ring oxidation of 4-nitrocatechol by the FeHPCD variants can be attributed specifically to the properties of the altered second-sphere residue and the substrate. The results suggest that proton transfer is necessary for catalysis, and that it occurs most efficiently when the substrate provides the proton and His200 serves as a catalyst. However, in the absence of an available substrate proton, a defined proton-transfer pathway in the protein can be utilized. Changes in the steric bulk and charge of the residue at position 200 appear to be capable of altering the rate-limiting step in catalysis and, perhaps, the nature of the reactive species.

Identification and molecular characterization of the homogentisate pathway responsible for pyomelanin production, the major melanin constituents in Aeromonas media WS

The pigmentation of many Aeromonas species has been thought to be due to the production of a L-DOPA (L-3,4-dihydroxyphenylalanine) based melanin. However, in this study we found that although L-DOPA synthesis occurs in the high-melanin-yielding Aeromonas media strain WS, it plays a minor, if any, role in pigmentation. Instead, the pigmentation of A. media strain WS is due to the production of pyomelanin through HGA (homogentisate). Gene products of phhA (encodes phenylalanine hydroxylase), tyrB and aspC (both encode aromatic amino acid aminotransferase), and hppD (encodes 4-hydroxyphenylpyruvate dioxygenase) constitute a linear pathway of converting phenylalanine to HGA and disruption of any one of these genes impairs or blocks pigmentation of A. media strain WS. This HGA biosynthesis pathway is widely distributed in Aeromonas, but HGA is only detectable in the cultures of pigmented Aeromonas species. Heterologous expression of HppD from both pigmented and non-pigmented Aeromonas species in E. coli leads to the production of pyomelanin and thus pigmentation, suggesting that most Aeromonas species have the critical enzymes to produce pyomelanin through HGA. Taken together, we have identified a widely conserved biosynthesis pathway of HGA based pyomelanin in Aeromonas that may be responsible for pigmentation of many Aeromonas species.

The siliconyl, boronyl, and iminoboryl ligands as analogues of the well-known carbonyl ligand: predicted reactivity towards dipolar cyclooligomerization in iron/cobalt carbonyl complexes

The Fe(CO)₄(SiO), Co(CO)₄(BO), and Co(CO)₄(BNSiMe₃), complexes akin to the well-known Fe(CO)₅ are predicted by density functional theory to undergo exothermic oligomerization to give the oligomers containing Si_nO_n/B_nO_n/B₂N₂ rings with single bonds.

A copper-based layered coordination polymer: synthesis, magnetic properties and electrochemical performance in supercapacitors

A layered copper-based coordination polymer ([Cu(hmt)(tfbdc)(H₂O)], Cu-LCP) has been synthesized, which shows ferromagnetic interactions between the adjacent copper(ii) ions and an excellent capacitive performance in supercapacitors.

A dominant homolytic O-Cl bond cleavage with low-spin triplet-state Fe(IV)=O formed is revealed in the mechanism of heme-dependent chlorite dismutase

Chlorite dismutase (Cld) is a heme-dependent enzyme that catalyzes the decomposition of toxic chlorite (ClO2(-)) into innocuous chloride and O2. In this paper, using the hybrid B3LYP density functional theory (DFT) method including dispersion interactions, the Cld reaction mechanism has been studied with a chemical model constructed on the X-ray crystal structure. The calculations indicate that the reaction proceeds along a stepwise pathway in the doublet state, i.e. a homolytic O-Cl bond cleavage of the substrate leading to an O-Fe(heme) species and a ClO˙ radical, followed by a rebinding O-O bond formation between them. The O-Fe(heme) species is demonstrated to be a low-spin triplet-state Fe(IV)=O diradicaloid. A low-spin singlet-state Fe(IV)=O is much less stable than the former, with an energy difference of 9.2 kcal mol(-1). The O-Cl bond cleavage is rate-limiting with a barrier of 10.6 kcal mol(-1), in good agreement with the experimental reaction rate of 2.0 × 10(5) s(-1). Furthermore, a heterolytic O-Cl bond dissociation in the initial step is shown to be unreachable, which ensures the high efficiency of the Cld enzyme by avoiding the generation of chlorate byproduct observed in the reactions of synthetic Fe porphyrins. Also, the pathways in the quartet and sextet states are unfavorable for the Cld reaction. The present results reveal a detailed mechanism III (defined in the text) including an interesting di-radical intermediate composed of a low-spin triplet-state Fe(IV)=O and a ClO˙ radical. Compared to a competitive heterolytic Cl-O cleavage in synthetic Fe porphyrins, the revelation of the domination of homolysis in Cld indicates not only the high efficiency of enzyme, but also the sensitivity of a heme and the significance of the enzymatic active-site surroundings (the His170 and Arg183 residues in the present case), which gives more insights into heme chemistry.

Visualizing the substrate-, superoxo-, alkylperoxo-, and product-bound states at the nonheme Fe(II) site of homogentisate dioxygenase

Homogentisate 1,2-dioxygenase (HGDO) uses a mononuclear nonheme Fe(2+) to catalyze the oxidative ring cleavage in the degradation of Tyr and Phe by producing maleylacetoacetate from homogentisate (2,5-dihydroxyphenylacetate). Here, we report three crystal structures of HGDO, revealing five different steps in its reaction cycle at 1.7-1.98 Å resolution. The resting state structure displays an octahedral coordination for Fe(2+) with two histidine residues (His331 and His367), a bidentate carboxylate ligand (Glu337), and two water molecules. Homogentisate binds as a monodentate ligand to Fe(2+), and its interaction with Tyr346 invokes the folding of a loop over the active site, effectively shielding it from solvent. Binding of homogentisate is driven by enthalpy and is entropically disfavored as shown by anoxic isothermal titration calorimetry. Three different reaction cycle intermediates have been trapped in different HGDO subunits of a single crystal showing the influence of crystal packing interactions on the course of enzymatic reactions. The observed superoxo:semiquinone-, alkylperoxo-, and product-bound intermediates have been resolved in a crystal grown anoxically with homogentisate, which was subsequently incubated with dioxygen. We demonstrate that, despite different folds, active site architectures, and Fe(2+) coordination, extradiol dioxygenases can proceed through the same principal reaction intermediates to catalyze the O2-dependent cleavage of aromatic rings. Thus, convergent evolution of nonhomologous enzymes using the 2-His-1-carboxylate facial triad motif developed different solutions to stabilize closely related intermediates in unlike environments.

Structure and function of atypically coordinated enzymatic mononuclear non-heme-Fe(II) centers

Mononuclear, non-heme-Fe(II) centers are key structures in O₂ metabolism and catalyze an impressive variety of enzymatic reactions. While most are bound via two histidines and a carboxylate, some show a different organization. A short overview of atypically coordinated O₂ dependent mononuclear-non-heme-Fe(II) centers is presented here Enzymes with 2-His, 3-His, 3-His-carboxylate and 4-His bound Fe(II) centers are discussed with a focus on their reactivity, metal ion promiscuity and recent progress in the elucidation of their enzymatic mechanisms. Observations concerning these and classically coordinated Fe(II) centers are used to understand the impact of the metal binding motif on catalysis.

Structural, spectroscopic, and electrochemical properties of nonheme Fe(II)-hydroquinonate complexes: synthetic models of hydroquinone dioxygenases

Using the tris(3,5-diphenylpyrazol-1-yl)borate ((Ph2)Tp) supporting ligand, a series of mono- and dinuclear ferrous complexes containing hydroquinonate (HQate) ligands have been prepared and structurally characterized with X-ray crystallography. The monoiron(II) complexes serve as faithful mimics of the substrate-bound form of hydroquinone dioxygenases (HQDOs) - a family of nonheme Fe enzymes that catalyze the oxidative cleavage of 1,4-dihydroxybenzene units. Reflecting the variety of HQDO substrates, the synthetic complexes feature both mono- and bidentate HQate ligands. The bidentate HQates cleanly provide five-coordinate, high-spin Fe(II) complexes with the general formula [Fe((Ph2)Tp)(HL(X))] (1X), where HL(X) is a HQate(1-) ligand substituted at the 2-position with a benzimidazolyl (1A), acetyl (1B and 1C), or methoxy (1D) group. In contrast, the monodentate ligand 2,6-dimethylhydroquinone (H(2)L(F)) exhibited a greater tendency to bridge between two Fe(II) centers, resulting in formation of [Fe(2)((Ph2)Tp)(2)(μ-L(F))(MeCN)]·[2F(MeCN)]. However, addition of one equivalent of "free" pyrazole ((Ph2)pz) ligand provided the mononuclear complex, [Fe((Ph2)Tp)(HL(F))((Ph2)pz)]·[1F((Ph2)pz)], which is stabilized by an intramolecular hydrogen bond between the HL(F) and (Ph2)pz donors. Complex 1F((Ph2)pz) represents the first crystallographically-characterized example of a monoiron complex bound to an untethered HQate ligand. The geometric and electronic structures of the Fe/HQate complexes were further probed with spectroscopic (UV-vis absorption, (1)H NMR) and electrochemical methods. Cyclic voltammograms of complexes in the 1X series revealed an Fe-based oxidation between 0 and -300 mV (vs. Fc(+/0)), in addition to irreversible oxidation(s) of the HQate ligand at higher potentials. The one-electron oxidized species (1X(OX)) were examined with UV-vis absorption and electron paramagnetic resonance (EPR) spectroscopies.

Versatile behavior of the fluorophosphinidene ligand in iron carbonyl chemistry

Fluorophosphinidene (PF) is a versatile ligand found experimentally in the transient species M(CO)(5)(PF) (M = Cr, Mo) as well as the stable cluster Ru(5)(CO)(15)(μ(4)-PF). The PF ligand can function as either a bent two-electron donor or a linear four-electron donor with the former being more common. The mononuclear tetracarbonyl Fe(PF)(CO)(4) is predicted to have a trigonal bipyramidal structure analogous to Fe(CO)(5) but with a bent PF ligand replacing one of the equatorial CO groups. The tricarbonyl Fe(PF)(CO)(3) is predicted to have two low-energy singlet structures, namely, one with a bent PF ligand and a 16-electron iron configuration and the other with a linear PF ligand and the favored 18-electron iron configuration. Low-energy structures of the dicarbonyl Fe(PF)(CO)(2) have bent PF ligands and triplet spin multiplicities. The lowest energy structures of the binuclear Fe(2)(PF)(CO)(8) and Fe(2)(PF)(2)(CO)(7) derivatives are triply bridged structures analogous to the experimental structure of the analogous Fe(2)(CO)(9). The three bridges in each Fe(2)(PF)(CO)(8) and Fe(2)(PF)(2)(CO)(7) structure include all of the PF ligands. Other types of low-energy Fe(2)(PF)(2)(CO)(7) structures include the phosphorus-bridging carbonyl structure (FP)(2)COFe(2)(CO)(6), lying only ~2 kcal/mol above the global minimum, as well as an Fe(2)(CO)(7)(μ-P(2)F(2)) structure in which the two PF groups have coupled to form a difluorodiphosphene ligand unsymmetrically bridging the central Fe(2) unit.

Are formal oxidation states above one viable in cyclopentadienylcopper cyanides?

Recent experiments have led to the discovery of the thermally unstable organocopper compounds (η(3)-C(3)H(5))CuMe(2), [(η(3)-C(3)H(5))CuMe(3)](-), and CuMe (4)(-) in which the copper atom is in the +3 formal oxidation state. In a quest for more stable organocopper compounds with copper in formal oxidation states above one, the binuclear cyclopentadienylcopper cyanides Cp(2)Cu(2)(CN)(n) (Cp = η(5)-C(5)H(5); n = 1, 2, 3) have been studied using density functional theory (DFT). The lowest energy structures are found to have terminal Cp rings and bridging cyanide ligands up to a maximum of two bridges. Higher-energy Cp(2)Cu(2)(CN)(n) (n = 1, 2, 3) structures are found with bridging Cp rings. The Cp(2)Cu(2)(CN)(3) derivatives, with the copper atoms in an average +2.5 oxidation state, are clearly thermodynamically disfavored with respect to cyanogen loss. However, Cp(2)Cu(2)(CN)(2) and Cp(2)Cu(2)(CN), with the copper atoms in the average oxidation states +1.5 and +2, respectively, are predicted to have marginal viability. The prospects for the copper(II) derivative Cp(2)Cu(2)(CN)(2) contrast with that of the "simple" Cu(CN)(2), which is shown both experimentally and theoretically to be unstable with respect to cyanogen loss to give CuCN.

Triple-decker-sandwich versus rice-ball structures for tris(benzene)dimetal derivatives of the first-row transition metals

Compounds of the type M(2)Bz(3) (Bz = benzene, C(6)H(6)) have been of interest since the related triple-decker mesitylenechromium sandwich (1,3,5-Me(3)C(6)H(3))(3)Cr(2) has been synthesized and characterized structurally by X-ray crystallography. Theoretical studies predict the lowest-energy M(2)Bz(3) structures of the early transition metals Ti, V, and Cr to be the triple-decker sandwiches trans-Bz(2)M(2)(η(6),η(6)-μ-C(6)H(6)) having quintet, triplet, and singlet spin states, respectively. In these structures, the central benzene ring functions as a hexahapto ligand to each metal atom. The singlet rice-ball cis-Bz(2)M(2)(μ-C(6)H(6)) structures with a 2.64-Å Mn═Mn double bond or a 2.81-Å Fe-Fe single bond are preferred for the central transition metals Mn and Fe. Singlet triple-decker-sandwich structures trans-Bz(2)M(2)(μ-C(6)H(6)) return as the lowest-energy structures for the late transition metals Co and Ni but with the central benzene ring only partially bonded to each metal atom. Thus, the lowest-energy cobalt derivative has a trans-Bz(2)Co(2)(η(3),η(3)-μ-C(6)H(6)) structure in which the central benzene ring acts as a trihapto ligand to each metal atom. Similarly, the lowest-energy nickel derivative has a trans-Bz(2)Ni(2)(η(2),η(2)-μ-C(6)H(6)) structure in which the central benzene ring acts as a dihapto ligand to each metal atom, leaving an uncomplexed C═C double bond. The metal-metal bond orders in the singlet "rice-ball" structures cis-Bz(2)M(2)(μ-C(6)H(6)) (M = Mn, Fe) and the hapticities of the central benzene rings in the singlet late-transition-metal triple-decker-sandwich structures trans-Bz(2)M(2)(μ-C(6)H(6)) (M = Co, Ni) are governed by the desirability for the metal atoms to attain the favored 18-electron configuration.

The Remarkable Nb2(CO)12 with Seven-Coordinate Niobium: Decarbonylation to Nb2(CO)11 and Nb2(CO)10

The dissociation of Nb2(CO)12 into two Nb(CO)6 units is predicted to require ∼13 kcal/mol so that Nb2(CO)12 rather than Nb(CO)6 is the anticipated initial oxidation product of the known Nb(CO)6(-) anion. This differs from the corresponding vanadium carbonyl chemistry where V(CO)6 rather than V2(CO)12 is found experimentally to be the oxidation product of V(CO)6(-). The lowest energy Nb2(CO)12 structure consists of two Nb(CO)6 fragments joined by a Nb-Nb bond of ∼3.4 Å length so that each niobium atom is heptacoordinate, counting the metal-metal bond. These niobium coordination polyhedra can be approximated by capped octahedra. Among unsaturated binuclear niobium carbonyls the lowest energy Nb2(CO)11 structure has a formal four-electron donor bridging η(2)-μ-CO group and a formal Nb-Nb single bond rather than only two-electron donor carbonyl groups and a formal Nb═Nb double bond. The Nb2(CO)11 structures with formal Nb═Nb double bonds and exclusively two-electron donor carbonyl groups lie more than 13 kcal/mol above this low-energy Nb2(CO)10(η(2)-μ-CO) structure. However, Nb2(CO)11 is predicted to be thermodynamically disfavored, owing to disproportionation into Nb2(CO)12 + Nb2(CO)10, a slightly exothermic process by ∼4 kcal/mol. The Nb2(CO)10 structures with formal Nb≡Nb triple bonds and all two-electron donor carbonyl groups appear to be particularly favorable, as suggested by high CO dissociation energies and viability toward disproportionation. Such structures are isolobal with Cp2Mo2(CO)4, which was the first stable metal carbonyl to be discovered with a short metal-metal distance, corresponding to a formal triple bond. Considerably higher energy Nb2(CO)10 structures (by more than 20 kcal/mol) have two four-electron donor bridging carbonyl groups and long niobium-niobium distances. Such structures can be considered to consist of a bidentate Nb(CO)6 "ligand" coordinating to a Nb(CO)4 unit through the two η(2)-μ-CO groups.