Homogeneously alloyed CdSxSe1-x nanocrystals: synthesis, characterization, and composition/size-dependent band gap

Heavy-Metal-Free Colloidal Quantum Dots: Progress and Opportunities in Solar Technologies

Colloidal quantum dots (QDs) hold great promise as building blocks in solar technologies owing to their remarkable photostability and adjustable properties through the rationale involving size, atomic composition of core and shell, shapes, and surface states. However, most high-performing QDs in solar conversion contain hazardous metal elements, including Cd and Pb, posing significant environmental risks. Here, a comprehensive review of heavy-metal-free colloidal QDs for solar technologies, including photovoltaic (PV) devices, solar-to-chemical fuel conversion, and luminescent solar concentrators (LSCs), is presented. Emerging synthetic strategies to optimize the optical properties by tuning the energy band structure and manipulating charge dynamics within the QDs and at the QDs/charge acceptors interfaces, are analyzed. A comparative analysis of different synthetic methods is provided, structure-property relationships in these materials are discussed, and they are correlated with the performance of solar devices. This work is concluded with an outlook on challenges and opportunities for future work, including machine learning-based design, sustainable synthesis, and new surface/interface engineering.

In Situ Monitoring of Non-Thermal Plasma Cleaning of Surfactant Encapsulated Nanoparticles

Surfactants are widely used in the synthesis of nanoparticles, as they have a remarkable ability to direct their growth to obtain well-defined shapes and sizes. However, their post-synthesis removal is a challenge, and the methods used often result in morphological changes that defeat the purpose of the initial controlled growth. Moreover, after the removal of surfactants, the highly active surfaces of nanomaterials may undergo structural reconstruction by exposure to a different environment. Thus, ex situ characterization after air exposure may not reflect the effect of the cleaning methods. Here, combining X-ray photoelectron spectroscopy, in situ infrared reflection absorption spectroscopy, and environmental transmission electron microscopy measurements with CO probe experiments, we investigated different surfactant-removal methods to produce clean metallic Pt nanoparticles from surfactant-encapsulated ones. It was demonstrated that both ultraviolet-ozone (UV-ozone) treatment and room temperature O2 plasma treatment led to the formation of Pt oxides on the surface after the removal of the surfactant. On the other hand, when H2 was used for plasma treatment, both the Pt0 oxidation state and nanoparticle size distribution were preserved. In addition, H2 plasma treatment can reduce Pt oxides after O2-based treatments, resulting in metallic nanoparticles with clean surfaces. These findings provide a better understanding of the various options for surfactant removal from metal nanoparticles and point toward non-thermal plasmas as the best route if the integrity of the nanoparticle needs to be preserved.

Design Rules for Obtaining Narrow Luminescence from Semiconductors Made in Solution

Solution-processed semiconductors are in demand for present and next-generation optoelectronic technologies ranging from displays to quantum light sources because of their scalability and ease of integration into devices with diverse form factors. One of the central requirements for semiconductors used in these applications is a narrow photoluminescence (PL) line width. Narrow emission line widths are needed to ensure both color and single-photon purity, raising the question of what design rules are needed to obtain narrow emission from semiconductors made in solution. In this review, we first examine the requirements for colloidal emitters for a variety of applications including light-emitting diodes, photodetectors, lasers, and quantum information science. Next, we will delve into the sources of spectral broadening, including "homogeneous" broadening from dynamical broadening mechanisms in single-particle spectra, heterogeneous broadening from static structural differences in ensemble spectra, and spectral diffusion. Then, we compare the current state of the art in terms of emission line width for a variety of colloidal materials including II-VI quantum dots (QDs) and nanoplatelets, III-V QDs, alloyed QDs, metal-halide perovskites including nanocrystals and 2D structures, doped nanocrystals, and, finally, as a point of comparison, organic molecules. We end with some conclusions and connections, including an outline of promising paths forward.

Assembling AgAuSe Quantum Dots with Peptidoglycan and Neutrophils to Realize Enhanced Tumor Targeting, NIR (II) Imaging, and Sonodynamic Therapy

Significant progress is made in drug delivery systems, but they still face problems such as poor stability in vivo, off-target drugs, and difficulty in crossing biological barriers. It is urgent to realize efficient targeted delivery and precisely controlled sustained release of drugs by using the integrated nanoplatform. Theranostic nanoplatform is a new biomedical technology that combines diagnosis or monitoring of diseases with treatment. Here, an integrated strategy of diagnosis and treatment is reported for delivering NIR-II imaged and therapeutic AgAuSe quantum dots (QDs) carried by peptidoglycan multilayer networks of bacteria to hitchhike circulating neutrophils for targeting the tumor. The assembled nanomaterials have good stability, which can not only initiate endogenous cells for drug delivery and achieve efficient targeting, but also guide drug imaging with excellent fluorescence property. Meanwhile, the elimination of established solid tumor is achieved with the administration of sonodynamic therapy without recurrence. This drug system expands the application of endogenous cell to participate in drug delivery system. Thus, the assembly strategy demonstrates the potential of endogenous neutrophils in functioning as natural drug vehicles and the application of NIR-II fluorescent QDs in biomedical engineering.

Synergistic Effect of Hybrid CdSe Nanobelt/PbI2 Flake Heterojunction Toward Drastic Performance Flexible Photodetectors

Despite numerous studies on broadband photodetectors, the problematic query that remains unaddressed is the limited photoresponsivity while broadening the spectral regime. Here, for the first time, a rational design of a hybrid 1D CdSe nanobelt/2D PbI₂ flake heterojunction device is constructed, which substantially boosts the photocurrent while significantly attenuating the dark current, resulting in improved photodetector figures-of-merit. Thanks to the excellent quality of the nanobelt/flake and built-in electric field at the CdSe/PbI₂ interface heterojunction, photogenerated carriers are promptly segregated and more photoexcitons are accumulated by the respective electrodes, enabling a high responsivity of ∼10⁶ A/W, making this one of the highest values among similar reported hybrid heterojunction photodetectors, together with a large linear dynamic range, superior sensitivity, excellent detectivity and external quantum efficiency, an ultrafast response, and a broadband spectral response range. The similar 1D/2D hybrid heterojunction device architecture assembled on the flexible polyimide tape substrate exhibits excellent folding endurance and mechanical, flexural, and long-term environmental stability. The present device architecture and robust operational stability in an ambient environment reveals that the combination of the present 1D/2D hybrid heterojunction has incredible potential for future flexible photoelectronic devices.

Activation of cadmium under simulated solar illumination and its impact on the mobility of Cd in flooded soils

In waterlogged paddy soils, cadmium (Cd) can be precipitated as cadmium sulfide (CdS) under reductive environment, thereby limiting the absorption of Cd by plants. Multiple environmental factors (such as water, pH, and Eh) played a role in the control of Cd mobility and bioavailability. In this study, we investigated the influence of the solar irradiation on the photodissolution of synthetic CdS-montmorillonite composites (CdS-M) in solution and the stability of Cd in natural soil. The release kinetic of Cd²⁺ showed that after the irradiation of simulated sunlight, CdS-M composites became less stable compared to the dark control. The solar irradiation seemed to enhance the release of Cd²⁺ from CdS significantly and continuously. Electron paramagnetic resonance (EPR) and quenching experiments confirmed that the photogenerated holes, •O₂^- and •OH, were possibly involved in the photo-induced release of Cd²⁺, while the holes was primarily responsible for the reaction. Irradiation under alkaline solution or the presence of DOM, PO₄^3-, CO₃^2-, and urea markedly inhibited the photodissolution process of CdS. The photo-mediated activation of Cd was further confirmed in paddy soil under natural sunlight, with a nearly threefold increase in concentration of extractable Cd during the 15 days of irradiation. This study highlights the importance of photochemical transformation of Cd in the environmental water and soil.

High-Performance and Broadband Flexible Photodetectors Employing Multicomponent Alloyed 1D CdSxSe1-x Micro-Nanostructures

Low-cost multicomponent alloyed one-dimensional (1D) semiconductors exhibit broadband absorption from the ultraviolet to the near-infrared regime, which has attracted a great deal of interest in high-performance flexible optoelectronic devices. Here, we report the facile one-step fabrication of high-performance broadband rigid and flexible photodevices based on multicomponent alloyed 1D cadmium-sulfur-selenide (CdS_xSe_1-x) micro-nanostructures obtained via a vapor transport route. Photoresponse measurements have demonstrated their superior spectral photoresponsivity (5.8 × 10⁴ A/W), several orders of magnitude higher than the pristine CdSe nanobelt photodevice, high specific detectivity (2 × 10¹⁵ Jones), photogain (1.2 × 10⁵), external quantum efficiency (EQE, 1.4 × 10⁷%), rapid response speed (13 ms), and excellent long-term environmental stability. The multicomponent alloyed CdS_xSe_1-x nanobelt photodevice demonstrated about three times higher photocurrent as well as can operate under multiple color illuminations (200-800 nm) and at a high applied bias of 10 V with the photoresponsivity and EQE being boosted to 4.34 × 10⁵ A/W and 8.96 × 10⁷%, respectively. Furthermore, multicomponent alloyed CdS_xSe_1-x nanobelt flexible photodevices show excellent mechanical and flexural photostabilities with identical photoresponse as rigid nanodevices. The improvement mechanism found in the present research can be exploited to lead to the design of high-performance flexible photodevices comprising other multicomponent nanomaterials.

Assessing the Environmental Effects Related to Quantum Dot Structure, Function, Synthesis and Exposure

Quantum dots (QDs) are engineered semiconductor nanocrystals with unique fluorescent, quantum confinement, and quantum yield properties, making them valuable in a range of commercial and consumer imaging, display, and lighting technologies. Production and usage of QDs are increasing, which increases the probability of these nanoparticles entering the environment at various phases of their life cycle. This review discusses the major types and applications of QDs, their potential environmental exposures, fates, and adverse effects on organisms. For most applications, release to the environment is mainly expected to occur during QD synthesis and end-product manufacturing since encapsulation of QDs in these devices prevents release during normal use or landfilling. In natural waters, the fate of QDs is controlled by water chemistry, light intensity, and the physicochemical properties of QDs. Research on the adverse effects of QDs primarily focuses on sublethal endpoints rather than acute toxicity, and the differences in toxicity between pristine and weathered nanoparticles are highlighted. A proposed oxidative stress adverse outcome pathway framework demonstrates the similarities among metallic and carbon-based QDs that induce reactive oxygen species formation leading to DNA damage, reduced growth, and impaired reproduction in several organisms. To accurately evaluate environmental risk, this review identifies critical data gaps in QD exposure and ecological effects, and provides recommendations for future research. Future QD regulation should emphasize exposure and sublethal effects of metal ions released as the nanoparticles weather under environmental conditions. To date, human exposure to QDs from the environment and resulting adverse effects has not been reported.

Ultrafast spectroscopy studies of carrier dynamics in semiconductor nanocrystals

Semiconductor nanocrystals have become ubiquitous both in scientific research and in applied technologies related to light. When a nanocrystal absorbs a photon an electron-hole pair is created whose fate dictates whether the nanocrystal will be suitable for a particular application. Ultrafast spectroscopy provides a real-time window to monitor the evolution of the electron-hole pair. In this review, we focus on CdSe nanocrystals, the most-studied nanocrystal system to date, and also highlight ultrasmall nanocrystals, “standard nanocrystals” of different binary composition, alloyed nanocrystals, and core/shell nanocrystals and nanorods. We focus on four time-resolved spectroscopies used to interrogate nanocrystals: pump-probe, fluorescence upconversion, time-correlated single photon counting, and non-linear spectroscopies. The basics of the nanocrystals and the spectroscopies are presented, followed by a detailed synopsis of ultrafast spectroscopy studies performed on the various semiconductor nanocrystal systems.

Tailoring Quantum Dot Sizes for Optimal Photoinduced Catalytic Activation of Nitrogenase

Many efforts have been directed towards elucidating the nitrogenase structure, its biocatalytic activity, and methods to artificially activate it by external stimuli. Here, we investigated how semiconductor nanoparticles (NPs) with sizes ranging between 2.3-3.5 nm form nano-biohybrids with the nitrogenase enzyme and enable its photoinduced biocatalytic activity. We examined two homogenously synthesized quantum dots (QDs), CdS, CdSe, and two nitrogenase variants, the wild-type and a cysteine-mutated. We show that the cysteine-mutated variant does not enhance the hydrogen generation amounts, as compared with the wild type. Nevertheless, we show that the 2.3 nm-sized CdSe NPs facilitate an eightfold increase compared with larger CdSe NPs. The obtained results were investigated using electrochemical techniques, transmission electron microscopy, and further confirmed by time-resolved spectroscopic measurements, which allow us to determine the electron tranfer rate constant (k_ET ) of the different configurations.

Fluorescent Semiconductor Nanorods for the Solid-Phase Polymerase Chain Reaction-Based, Multiplexed Gene Detection of Mycobacterium tuberculosis

The spread of infectious diseases with significantly high mortality rates can wreak devastating damage on global health systems and economies, underscoring the need for better disease diagnostic platforms. Solid-phase polymerase chain reaction (SP-PCR) potentially combines the advantages of conventional PCR-based diagnostics with the capability of multiplexed detection, given that the spatial separation between primers circumvents unwanted primer-primer interactions. However, the generally low efficiency of solid-phase amplification results in poor sensitivity and limits its use in detection schemes. We present an SP-PCR-based, multiplexed pulldown fluorescence assay for the detection of Mycobacterium tuberculosis (MTB), utilizing highly fluorescent oligonucleotide-functionalized CdSe/CdS and CdSe_1-xS_x/CdS nanorods (NRs) as multicolor hybridization probes. The large surface area of the NRs allows for their easy capture and pulldown, but without contributing significantly to the interparticle photon reabsorption when clustered at the pulldown sites. The NR nanoprobes were specifically designed to target the hotspot regions of the rpoB gene of MTB, which have been implicated in resistance to standard rifampicin treatment. The implementation of the semiconductor NRs as photostable multicolor fluorophores in a multiplexed SP-PCR-based detection scheme allowed for the identification of multiple hotspot regions with sub-picomolar levels of sensitivity and high specificity in artificial sputum. While this work demonstrates the utility of semiconductor NRs as highly fluorescent chromophores that can enable SP-PCR as a sensitive and accurate technique for multipathogen diagnostics, the flexible surface chemistry of the NRs should allow them to be applicable to a wide variety of detection motifs.

Optical and Magneto-Optical Properties of Donor-Bound Excitons in Vacancy-Engineered Colloidal Nanocrystals

Controlled insertion of electronic states within the band gap of semiconductor nanocrystals (NCs) is a powerful tool for tuning their physical properties. One compelling example is II-VI NCs incorporating heterovalent coinage metals in which hole capture produces acceptor-bound excitons. To date, the opposite donor-bound exciton scheme has not been realized because of the unavailability of suitable donor dopants. Here, we produce a model system for donor-bound excitons in CdSeS NCs engineered with sulfur vacancies (V_S) that introduce a donor state below the conduction band (CB), resulting in long-lived intragap luminescence. V_S-localized electrons are almost unaffected by trapping, and suppression of thermal quenching boosts the emission efficiency to 85%. Magneto-optical measurements indicate that the V_S are not magnetically coupled to the NC bands and that the polarization properties are determined by the spin of the valence-band photohole, whose spin flip is massively slowed down due to suppressed exchange interaction with the donor-localized electron.

Morphology Controlled Synthesis of Composition Related Plasmonic CuCdS Alloy Nanocrystals

Cu-based ternary alloy nanocrystals have emerged for extensive applications in solar cells, light-emitting devices (LEDs), and photoelectric detectors because of their low-toxicity, tunable band gaps, and large absorption coefficients. It is still an enormous challenge that regulating optical and electrical properties through changing their compositions and shapes in alloy nanocrystals. Herein, we present a facile method to synthesize CuCdS alloy nanocrystals (NCs) with tunable compositions and shapes at relatively low temperature. Different morphologies of monodisperse CuCdS nanocrystals are tailored successfully by simply adjusting the reaction temperature and Cu:Cd precursor molar ratio. The as-synthesized nanocrystals are of homogeneous alloy structures with uniform obvious lattice fringes throughout the whole particles rather than heterojunction structures. The localized surface plasmon resonance (LSPR) absorption peaks of CuCdS NCs are clearly observed and can be precisely tuned by varying the Cu:Cd molar ratio. Moreover, current-voltage (I-V) behaviors of different shaped CuCdS nanocrystals show certain rectification characteristics. The alloy CuCdS NCs with tunable shape, band gap, and compositionpossess a potential application in optoelectronic devices.

Ultrasonication-Assisted Synthesis of ZnxCd1−xS for Enhanced Visible-Light Photocatalytic Activity

ZnxCd1−xS as a solid solution photocatalyst has attracted widespread attention for its unique adjustable band gap structure and good and stable performance. A novel synthesis approach for ZnxCd1−xS is still required to further improve its performance. In this study, we synthesized a series of ZnxCd1−xS (x = 0−1) solid solutions via an ultrasonication-assisted hydrothermal route. In comparison with conventional methods of preparation, the sample prepared by our innovative method showed enhanced photocatalytic activity for the degradation of a methyl orange (MO) solution under visible light due to its high crystallinity and small crystallite size. Furthermore, the composition and bandgap of ZnxCd1−xS can be tuned by adjusting the mole ratio of Zn2+/Cd2+. Zn0.3Cd0.7S shows the highest level of activity and stability for the degradation of MO with k = 0.85 h−1, which is 2.2 times higher than that of CdS. The balance between band gap structure-directed redox capacity and light absorption of Zn0.3Cd0.7S accounts for its high photocatalytic performance, both of which are determined by the composition of the solid solution. Also, a degradation mechanism of MO over the sample is tentatively proposed. This study demonstrates a new strategy to synthesize highly efficient sulfide photocatalysts.

Bandgap Tunable Ternary Cd x Sb2-y S3-δ Nanocrystals for Solar Cell Applications

We report the synthesis and photovoltaic performance of a new nonstoichiometric ternary metal sulfide alloyed semiconductor-Cd _x Sb_2-y S_3-δ nanocrystals prepared by the two-stage sequential ionic layer adsorption reaction technique. The synthesized Cd _x Sb_2-y S_3-δ nanocrystals retain the orthorhombic structure of the host Sb₂S₃ with Cd substituting a fraction (x = 0-0.15) of the cationic element Sb. The Cd _x Sb_2-y S_3-δ lattice expands relative to the host, Sb₂S_3, with its lattice constant a increasing linearly with Cd content x. Optical and external quantum efficiency (EQE) spectra revealed that the bandgap E _g of Cd _x Sb_2-y S_3-δ decreased from 1.99 to 1.69 eV (i.e., 625-737 nm) as x increased from 0 to 0.15. Liquid-junction Cd _x Sb_2-y S_3-δ quantum dot-sensitized solar cells were fabricated using the polyiodide electrolyte. The best cell yielded a power conversion efficiency (PCE) of 3.72% with the photovoltaic parameters of J _sc = 15.97 mA/cm², V _oc = 0.50 V, and FF = 46.6% under 1 sun. The PCE further increased to 4.86%, a respectable value for a new solar material, under a reduced light intensity of 10% sun. The PCE (4.86%) and J _sc (15.97 mA/cm²) are significantly larger than that (PCE = 1.8%, J _sc = 8.55 mA/cm²) of the Sb₂S₃ host. Electrochemical impedance spectroscopy showed that the ZnSe passivation coating increased the electron lifetime by three times. The EQE spectrum of Cd _x Sb_2-y S_3-δ has a maximal EQE of 82% at λ = 350 nm and covers the spectral range of 300-750 nm, which is significantly broader than that (300-625 nm) of the Sb₂S₃ host. The EQE-integrated current density yields a J _ph of 11.76 mA/cm². The tunable bandgap and a respectable PCE near 5% suggest that Cd _x Sb_2-y S_3-δ could be a potential candidate for a solar material.

Influence of precursor ratio and dopant concentration on the structure and optical properties of Cu-doped ZnCdSe-alloyed quantum dots

Tunable copper doped Zn_1−xCd_xS alloy quantum dots (QDs) were successfully synthesized by the wet chemical method.

Strategies for extending charge separation in colloidal nanostructured quantum dot materials

Semiconductor colloidal metal chalcogenides (II-VI) in the form of quantum dots (QDs) and different heterostructures (core/shell, alloys, etc.) are of extensive interest in scientific research for both a fundamental understanding and technological applications because of their quantized size and different optical properties; however, due to their small size, the exciton (bound electron and hole) experiences a strong Coulombic attraction, which has a remarkable impact on the charge separation and photophysical properties of QDs. Thus, to achieve an efficient charge separation, numerous attempts have been made via the formation of different heterostructures, QD/molecular adsorbate (either organic or inorganic) assemblies, etc. These hybrid materials ameliorated the absorption of the incident light as well as charge separation. This article reviews the strategies for extending charge separation in these colloidal nanocrystals (NCs), which is one of the crucial steps to elevate the solar to electrical energy conversion efficiency in a quantum dot-sensitized solar cell (QDSC). The article summarizes the benefits of co-sensitization and experimental shreds of evidence for the multiple charge transfer processes involved in a QDSC. Studies have shown that in the co-sensitization process, prolonged charge separation occurs via the dual behavior of the molecular adsorbate, sensitization (electron injection) and capture of holes from photoexcited QDs. This perspective emphases band edge engineering and control of charge carrier dynamics in various core/shell structures. The impact of colloidal alloy NCs on charge separation and interesting photophysical properties was recapitulated via the steady-state and time-resolved photoluminescence (PL) and femtosecond transient absorption spectroscopic techniques. Finally, the prolonged lifetime and extent of charge separation for these hybrid NCs (or the composites) assisted in the development of a better light harvester as compared to the case of their pure counterparts.

Improving the Power-Conversion Efficiency through Alloying in Common Anion CdZnX (X=S, Se) Nanocrystal Sensitized Solar Cells

In this paper, we have investigated the possibility of utilizing CdZnS and CdZnSe alloy nanocrystals (NCs) as sensitizers in quantum-dot solar cells (QDSCs). The alloy NCs were synthesized by a high-temperature hot injection method and subsequently characterized through high photoluminescence quantum yield, along with larger size compared to binary NCs. Femtosecond transient absorption measurements revealed long-lived charge carriers in the alloy structure due to more structural rigidity and less defect states. Finally, the solar-cell efficiencies of the CdZnS (CdZnSe) NCs were found to be 3.05 % (3.69 %) as compared to 1.23 % (3.12 %) efficiencies for CdS (CdSe) NCs. Thus, common anion ternary NCs have been successfully utilized for solar-cell assembly and can be helpful for constructing tandem solar cells to harvest the high-energy portion of solar radiation.

Precursor reaction kinetics control compositional grading and size of CdSe1-x S x nanocrystal heterostructures

We report a method to control the composition and microstructure of CdSe_1-x S _x nanocrystals by the simultaneous injection of sulfide and selenide precursors into a solution of cadmium oleate and oleic acid at 240 °C. Pairs of substituted thio- and selenoureas were selected from a library of compounds with conversion reaction reactivity exponents (k _E) spanning 1.3 × 10^-5 s^-1 to 2.0 × 10^-1 s^-1. Depending on the relative reactivity (k _Se/k _S), core/shell and alloyed architectures were obtained. Growth of a thick outer CdS shell using a syringe pump method provides gram quantities of brightly photoluminescent quantum dots (PLQY = 67 to 90%) in a single reaction vessel. Kinetics simulations predict that relative precursor reactivity ratios of less than 10 result in alloyed compositions, while larger reactivity differences lead to abrupt interfaces. CdSe_1-x S _x alloys (k _Se/k _S = 2.4) display two longitudinal optical phonon modes with composition dependent frequencies characteristic of the alloy microstructure. When one precursor is more reactive than the other, its conversion reactivity and mole fraction control the number of nuclei, the final nanocrystal size at full conversion, and the elemental composition. The utility of controlled reactivity for adjusting alloy microstructure is discussed.

A consolidated account of electrochemical determination of band structure parameters in II-VI semiconductor quantum dots: a tutorial review

Probing absolute electronic energy levels in semiconductor quantum dots (Q-dots) is crucial for engineering their electronic band structure and hence for precise design of composite nano-structure based devices. The use of electrochemistry has allowed us to investigate size, shape and composition dependent band structure parameters viz. the conduction band edge, valence band edge & quasi-particle gap and to establish novel charge induced phenomena in colloidal semiconductor Q-dots. The electrochemical behavior is also of special importance for the prediction of the stability of Q-dots in biological environments as well as for precise design of composite nanohetero-structures for opto-electronic (light emitting diodes) and photovoltaic (solar cells) applications. Several researchers have contributed to probing and predicting the positions of absolute energy levels of band edges and surface states as well as to the establishment of a potential window of stability for a wide variety of Q-dots both in aqueous media and in organic solution. The crucial point about these studies is that unlike spectroscopic methods, no unified approach has been followed and a variety of methods and protocols have been developed to carry out these measurements either on diffusing or thin films of Q-dots in different electrolyte media viz. aqueous, organic and ionic liquids, each having their own advantages over the others. However, a consolidated account of these methods and protocols is not available in the literature. The aim of this tutorial review is therefore to consolidate and compare the studies related to the determination of the band structure of II-VI semiconductor Q-dots through electrochemical measurements. A brief introduction to electrochemical techniques, especially cyclic voltammetry, is given, followed by a summary of experimental methods developed for these measurements. Finally, a concise protocol that can be easily applied universally and is attractive for other users dealing with semiconductor Q-dot based devices is discussed.

Augmented band gap tunability in indium-doped zinc sulfide nanocrystals

Doping semiconductor nanocrystals is a powerful tool to impart new and beneficial optical and electrical properties to the host nanocrystals. Doping has been used to improve the performances of nanocrystal-based devices in applications as diverse as optics, magnetism, electronics, catalysis and sensing. In this work we present a low temperature colloidal synthesis of zinc sulfide (ZnS) nanocrystals doped with indium. Through optimization of the reaction parameters and the doping level, quantum confined (∼2 nm in size) crystalline colloids with highly tunable optical properties are achieved. Using a suite of characterization techniques including X-ray diffraction, high-resolution transmission electron microscopy, optical spectroscopies (absorption, emission, and Raman), compositional analyses and first principles simulations, we investigate the structural, morphological and optical properties of the synthesized nanocrystals. Indium dopants are found to heavily influence the band gap of ZnS. This strategy in addition to traditional methods of size control enables the synthesis of nanocrystals with finely tunable band gaps between ∼3.8 eV-4.3 eV. These doped ZnS nanocrystals are fabricated into selective UV thin-film absorbers and discriminatory proof-of-concept UVA-UVB/C photodetectors.

Intermolecular distance measurement with TNT suppressor on the M13 bacteriophage-based Förster resonance energy transfer system

An M13 bacteriophage-based Förster resonance energy transfer (FRET) system is developed to estimate intermolecular distance at the nanoscale using a complex of CdSSe/ZnS nanocrystal quantum dots, genetically engineered M13 bacteriophages labeled with fluorescein isothiocyanate and trinitrotoluene (TNT) as an inhibitor. In the absence of trinitrotoluene, it is observed that a significant spectral shift from blue to green occur, which represents efficient energy transfer through dipole-dipole coupling between donor and acceptor, or FRET-on mode. On the other hand, in the presence of trinitrotoluene, the energy transfer is suppressed, since the donor-to-acceptor intermolecular distance is detuned by the specific capturing of TNT by the M13 bacteriophage, denoted as FRET-off mode. These noble features are confirmed by changes in the fluorescence intensity and the fluorescence decay curve. TNT addition to our system results in reducing the total energy transfer efficiency considerably from 16.1% to 7.6% compared to that in the non-TNT condition, while the exciton decay rate is significantly enhanced. In particular, we confirm that the energy transfer efficiency satisfies the original intermolecular distance dependence of FRET. The relative donor-to-acceptor distance is changed from 70.03 Å to 80.61 Å by inclusion of TNT.

Facile Synthesis of Ternary Alloy of CdSe1-xSx Quantum Dots with Tunable Absorption and Emission of Visible Light

The synthesis of alloyed semiconductor quantum dots has produced structures that have distinct properties in comparison with both their bulk counterparts and their parent binary semiconductor quantum dots. In this work, the quantum confined structures of a ternary alloy of CdSe_1−xS_x were synthesized by one-pot synthesis method in an aqueous medium at a low temperature and capped with 3-mercaptopropoionic acid. Structures of the synthesized quantum dots were investigated by energy dispersive X-ray, X-ray diffraction, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. The obtained quantum dots had modified cubic structures as proven by X-ray diffraction and selected area electron diffraction. The optical properties of the synthesized quantum dots were characterized by optical absorption, photoluminescence, and color analysis. Optical absorption investigation revealed a widening of the band gap of CdSe_1−xS_x with increasing S content. This widening increased for the samples suspended in water relative to the samples measured in powder form due to the difference in the environment of the two cases. The size determined from the optical absorption measurements was found to be compatible with the sizes obtained from the X-ray diffraction with the value of bowing parameter around 1, which indicated a graded diffusion of sulfur. It was also ascertained that the emission of different compositions covered the most visible range with a small full width at half maximum. The x and y values of the chromaticity coordinates decreased with increasing sulfur content of up to 15%, while the z value increased.

Nanofiber-Directed Anisotropic Self-Assembly of CdSe-CdS Quantum Rods for Linearly Polarized Light Emission Evidenced by Quantum Rod Orientation Microscopy

Hybrid soft materials composed of CdSe-CdS nanorods or "quantum rods" (QRs) and the fluorescent 2,3-didecyloxyanthracene (DDOA) low molecular weight organogelator are obtained through self-assembly. Spectroscopy, microscopy, and rheology studies show that the QRs and DDOA coassemble, thereby stabilizing the organogels. Depending on the QR load and excitation wavelength, single nanofibers (NFs) of the hybrid gel display either sharp polarized red luminescence (under green excitation), or dual perpendicularly polarized blue and red emissions (under UV excitation). Transmission electron microscopy, microspectroscopy, and quantum rod orientation microscopy (QROM) reveal that QRs align along the organogel NFs with order parameters reaching 76% and 87%. This paves the way for obtaining surfaces of QR/NF assemblies yielding sharp red linearly polarized emission. In addition, this work demonstrates that QRs can be used more generally to probe nanostructured soft materials, even nonemissive ones. QROM allows to establish maps of the orientation of single QRs dispersed onto or within a gel network by measuring the polarization of the emission of the individual QRs. As occurs within this work in which QRs and NFs interact, the orientation of each QR reveals information on the underlying nanostructure (such as surface striation, bundle formation, and helicity).

Achieving the Widest Range of Syngas Proportions at High Current Density over Cadmium Sulfoselenide Nanorods in CO2 Electroreduction

Electroreduction of CO₂ is a sustainable approach to produce syngas with controllable ratios, which are required as specific reactants for the optimization of different industrial processes. However, it is challenging to achieve tunable syngas production with a wide ratio of CO/H₂ , while maintaining a high current density. Herein, cadmium sulfoselenide (CdS_x Se_1-x ) alloyed nanorods are developed, which enable the widest range of syngas proportions ever reported at the current density above 10 mA cm^-2 in CO₂ electroreduction. Among CdS_x Se_1-x nanorods, CdS nanorods exhibit the highest Faradaic efficiency (FE) of 81% for CO production with a current density of 27.1 mA cm^-2 at -1.2 V vs. reversible hydrogen electrode. With the increase of Se content in CdS_x Se_1-x nanorods, the FE for H₂ production increases. At -1.2 V vs. RHE, the ratios of CO/H₂ in products vary from 4:1 to 1:4 on CdS_x Se_1-x nanorods (x from 1 to 0). Notably, all proportions of syngas are achieved with current density higher than ≈25 mA cm^-2 . Mechanistic study reveals that the increased Se content in CdS_x Se_1-x nanorods strengthens the binding of H atoms, resulting in the increased coverage of H* and thus the enhanced selectivity for H₂ production in CO₂ electroreduction.

Phosphine-free synthesis and optical stabilities of composition-tuneable monodisperse ternary PbSe1−xSx alloyed nanocrystals via cation exchange

Composition-tunable monodisperse PbSe_1−xS_x alloyed NCs were synthesized by employing the cation exchange method, which demonstrated excellent air stability.

Harnessing the properties of colloidal quantum dots in luminescent solar concentrators

This review summarizes the recent progress, challenges and perspectives of luminescent solar concentrators based on colloidal quantum dots via harnessing their properties.

Elucidating the role of surface passivating ligand structural parameters in hole wave function delocalization in semiconductor cluster molecules

This article describes the mechanisms underlying electronic interactions between surface passivating ligands and (CdSe)₃₄ semiconductor cluster molecules (SCMs) that facilitate band-gap engineering through the delocalization of hole wave functions without altering their inorganic core. We show here both experimentally and through density functional theory calculations that the expansion of the hole wave function beyond the SCM boundary into the ligand monolayer depends not only on the pre-binding energetic alignment of interfacial orbitals between the SCM and surface passivating ligands but is also strongly influenced by definable ligand structural parameters such as the extent of their π-conjugation [π-delocalization energy; pyrene (Py), anthracene (Anth), naphthalene (Naph), and phenyl (Ph)], binding mode [dithiocarbamate (DTC, -NH-CS₂^-), carboxylate (-COO^-), and amine (-NH₂)], and binding head group [-SH, -SeH, and -TeH]. We observe an unprecedentedly large ∼650 meV red-shift in the lowest energy optical absorption band of (CdSe)₃₄ SCMs upon passivating their surface with Py-DTC ligands and the trend is found to be Ph- < Naph- < Anth- < Py-DTC. This shift is reversible upon removal of Py-DTC by triethylphosphine gold(i) chloride treatment at room temperature. Furthermore, we performed temperature-dependent (80-300 K) photoluminescence lifetime measurements, which show longer lifetime at lower temperature, suggesting a strong influence of hole wave function delocalization rather than carrier trapping and/or phonon-mediated relaxation. Taken together, knowledge of how ligands electronically interact with the SCM surface is crucial to semiconductor nanomaterial research in general because it allows the tuning of electronic properties of nanomaterials for better charge separation and enhanced charge transfer, which in turn will increase optoelectronic device and photocatalytic efficiencies.

Sunlight Promotes Fast Release of Hazardous Cadmium from Widely-Used Commercial Cadmium Pigment

Cadmium pigments are widely used in the polymer and ceramic industry. Their potential environmental risk is under debate, being the major barrier for appropriate regulation. We show that 83.0 ± 0.2% of hazardous cadmium ion (Cd²⁺) was released from the commercial cadmium sulfoselenide pigment (i.e., cadmium red) in aqueous suspension within 24 h under simulated sunlit conditions. This photodissolution process also generated sub-20 nm pigment nanoparticles. Cd²⁺ release is attributed to the reactions between photogenerated holes and the pigment lattices. The photodissolution process can be activated by both ultraviolet and visible light in the solar spectrum. Irradiation under alkaline conditions or in the presence of phosphate and carbonate species resulted in reduced charge carrier energy or the formation of insoluble and photostable cadmium precipitates on pigment surfaces, mitigating photodissolution. Tannic acid inhibited the photodissolution process by light screening and scavenging photogenerated holes. The fast release of Cd²⁺ from the pigment was further confirmed in river water under natural sunlight, with 38.6 ± 0.1% of the cadmium released within 4 h. Overall, this study underscores the importance to account for photochemical effects to inform risk assessments and regulations of cadmium pigments which are currently based on their low solubility.

Synthesis and characterization of Ag2S x Se1-x nanocrystals and their photoelectrochemical property

I-VI chalcogenide low-toxicity semiconductors and their near-infrared optical property are of great importance for solar cell and biological probe applications. Here, we report the synthesis of Ag₂S _x Se_1-x (x = 0-1) ternary nanocrystals (NCs) and their photoelectrochemical properties, using a refined simple hot-injection reaction recipe. The ICP-MS results show the change of non-metallic composition in products and precursors, which can be well fitted with Vegard's equation. Ternary alloying broadens the absorption spectrum region of Ag₂S NCs. It can also balance the transfer of photo-excited electrons through the interfaces of TiO₂/Ag₂S _x Se_1-x and Ag₂S _x Se_1-x /electrolyte by minimizing electron-hole recombination. By tuning the compositions, an increase in power conversion efficiency (PCE) was observed with the increase of S composition and the size of the NCs. The photoelectrochemical results reveal that Ag₂S _x Se_1-x ternary NCs exhibit higher conversion efficiency than pure binary NCs. The drop in PCE of the binary NCs is mainly attributed to the decreases of the charge separation following exciton transition.

Theoretical investigation of energy gap bowing in CdSxSe1−x alloy quantum dots

To investigate energy gap bowing in homogeneously alloyed CdS_xSe_1−x quantum dots (QDs) and to understand whether it is different from bulk, we perform density functional theory based electronic structure calculations for spherical QDs of different compositions x (0 ≤ x ≤ 1) and of varying sizes (2.2 to 4.6 nm).

Band-tunable photodetectors based on graphene/alloyed ZnxCd1−xS film hybrids

We have achieved band-tunable photodetectors based on graphene/alloyed ZnxCd_1–xS film hybrids with cut-off edge in spectra response gradually changed from 410 nm to 580 nm.

Absorption Enhancement in "Giant" Core/Alloyed-Shell Quantum Dots for Luminescent Solar Concentrator

Luminescent solar concentrators (LSCs) can potentially reduce the cost of solar cells by decreasing the photoactive area of the device and boosting the photoconversion efficiency (PCE). This study demonstrates the application of "giant" CdSe/Cd_x Pb_1-x S core/shell quantum dots (QDs) as light harvesters in high performance LSCs with over 1.15% PCE. Pb addition is critical to maximize PCE. First, this study synthesizes "giant" CdSe/Cd_x Pb_1-x S QDs with high quantum yield (40%), narrow size distribution (<10%), and stable photoluminescence in a wide temperature range (100-300 K). Subsequently these thick alloyed-shell QDs are embedded in a polymer matrix, resulting in a highly transparent composite with absorption spectrum covering the range 300-600 nm, and are applied as active material for prototype LSCs. The latter exhibits a 15% enhancement in efficiency with respect to 1% PCE of the pure-CdS-shelled QDs. This study attributes this increase to the contribution of Pb doping. The results demonstrate a straightforward approach to enhance light absorption in "giant" QDs by metal doping, indicating a promising route to broaden the absorption spectrum and increase the efficiency of LSCs.

Measuring and Predicting the Internal Structure of Semiconductor Nanocrystals through Raman Spectroscopy

Nanocrystals composed of mixed chemical domains have diverse properties that are driving their integration in next-generation electronics, light sources, and biosensors. However, the precise spatial distribution of elements within these particles is difficult to measure and control, yet profoundly impacts their quality and performance. Here we synthesized a unique series of 42 different quantum dot nanocrystals, composed of two chemical domains (CdS:CdSe), arranged in 7 alloy and (core)shell structural classes. Chemometric analyses of far-field Raman spectra accurately classified their internal structures from their vibrational signatures. These classifications provide direct insight into the elemental arrangement of the alloy as well as an independent prediction of fluorescence quantum yield. This nondestructive, rapid approach can be broadly applied to greatly enhance our capacity to measure, predict and monitor multicomponent nanomaterials for precise tuning of their structures and properties.

Toxicological impact of cadmium-based quantum dots towards aquatic biota: Effect of natural sunlight exposure

Cadmium-based quantum dots (QDs) are increasingly applied in existent and emerging technologies, especially in biological applications due to their exceptional photophysical and functionalization properties. However, they are very toxic compounds due to the high reactive and toxic cadmium core. The present study aimed to determine the toxicity of three different QDs (CdS 380, CdS 480 and CdSeS/ZnS) before and after the exposure of suspensions to sunlight, in order to assess the effect of environmentally relevant irradiation levels in their toxicity, which will act after their release to the environment. Therefore, a battery of ecotoxicological tests was performed with organisms that cover different functional and trophic levels, such as Vibrio fischeri, Raphidocelis subcapitata, Chlorella vulgaris and Daphnia magna. The results showed that core-shell type QDs showed lower toxic effects to V. fischeri in comparison to core type QDs before sunlight exposure. However, after sunlight exposure, there was a decrease of CdS 380 and CdS 480 QD toxicity to bacterium. Also, after sunlight exposure, an effective decrease of CdSeS/ZnS and CdS 480 toxicity for D. magna and R. subcapitata, and an evident increase in CdS 380 QD toxicity, at least for D. magna, were observed. The results of this study suggest that sunlight exposure has an effect in the aggregation and precipitation reactions of larger QDs, causing the degradation of functional groups and formation of larger bulks which may be less prone to photo-oxidation due to their diminished surface area. The same aggregation behaviour after sunlight exposure was observed for bare QDs. These results further emphasize that the shell of QDs seems to make them less harmful to aquatic biota, both under standard environmental conditions and after the exposure to a relevant abiotic factor like sunlight.

An ultrasensitive SiO2-encapsulated alloyed CdZnSeS quantum dot-molecular beacon nanobiosensor for norovirus

Ultrasensitive, rapid and selective diagnostic probes are urgently needed to overcome the limitations of traditional probes for norovirus (NV). Here, we report the detection of NV genogroup II via nucleic acid hybridization technology using a quantum dot (QD)-conjugated molecular beacon (MB) probe. To boost the sensitivity of the MB assay system, an ultrasensitive QD fluorophore with unique optical properties was synthesized, characterized and exploited as a fluorescence signal generator. Alloyed thioglycolic (TGA)-capped CdZnSeS QDs with a high photoluminescence (PL) quantum yield (QY) value of 92% were synthesized, and a modified silanization method was employed to encapsulate the thiol-capped QDs in a silica layer. The resulting highly luminescent alloyed SiO2-coated CdZnSeS QDs had a remarkable PL QY value of 98%. Transmission electron microscopy and dynamic light scattering confirmed the monodispersity of the alloyed nanocrystals, and zeta potential analysis confirmed their colloidal stability. Powder X-ray diffraction and PL lifetime measurements confirmed the surface modification of the QDs. The alloyed TGA-capped and SiO2-coated CdZnSeS QD-conjugated MB bioprobes detected extremely low concentrations of NV RNA. Ultrasensitive detection of low concentrations of NV RNA with a limit of detection (LOD) of 8.2copies/mL in human serum and a LOD of 9.3 copies/mL in buffer was achieved using the SiO2-coated CdZnSeS QD-MB probes, an increase in sensitivity of 3-fold compared with the detection limit for NV RNA using TGA-capped CdZnSeS QD-MBs. The additional merits of our detection system are rapidity, specificity and improved sensitivity over conventional molecular test probes.

Spectroscopic investigation of water-soluble alloyed QDs with bovine serum albumin

We present here a systematic investigation on the interaction between a water-soluble alloyed semiconductor quantum dot and bovine serum albumin using various spectroscopic techniques i.e. fluorescence quenching, resonance light scattering and synchronous fluorescence spectroscopy. The analysis of fluorescence spectrum and fluorescence intensity indicates that the intrinsic fluorescence of bovine serum albumin (BSA) gets quenched by both static and dynamic quenching mechanism. The Stern-Volmer quenching constants, energy transfer efficiency parameters, binding parameters and corresponding thermodynamic parameters (ΔH⁰ , ΔS⁰ and ΔG⁰ ) have been evaluated by using van 't Hoff equation at different temperatures. A positive entropy change with a positive enthalpy change was observed suggesting that the binding process was an entropy-driven, endothermic process associated with the hydrophobic effect. The intermolecular distance (r) between donor (BSA) and acceptor (CdSeS/ZnS quantum dots) was estimated according to Förster's theory of non-radiative energy transfer. The synchronous fluorescence spectra revealed a blue shift in the emission maxima of tryptophan which is indicative of increasing hydrophobicity. Negative ΔG⁰ values implied that the binding process was spontaneous. It was found that hydrophobic forces played a role in the quenching process. Copyright © 2016 John Wiley & Sons, Ltd.