Copper(I)-alpha-ketocarboxylate complexes: characterization and O2 reactions that yield copper-oxygen intermediates capable of hydroxylating arenes

Oxygen-atom transfer photochemistry of a molecular copper bromate complex

We report the synthesis and oxygen-atom transfer (OAT) photochemistry of [Cu(tpa)BrO3]ClO4.

Iron and manganese oxo complexes, oxo wall and beyond

High-valent metal-oxo species with multiply-bonded M-O groups have been proposed as key intermediates in many biological and abiological catalytic oxidation reactions. These intermediates are implicated as active oxidants in alkane hydroxylation, olefin epoxidation and other oxidation reactions. For example, [Fe^ivO(porphyrinato^•-)]⁺ cofactors bearing π-radical porphyrinato^•- ligands oxidize organic substrates in cytochrome P450 enzymes, which are common to many life forms. Likewise, high-valent Mn-oxo species are active for H₂O oxidation in photosystem II. The chemistry of these native reactive species has inspired chemists to prepare highly oxidized transition-metal complexes as functional mimics. Although many synthetic Fe-O and Mn-O complexes now exist, the analogous oxo complexes of the late transition metals (groups 9-11) are rare. Indeed, late-transition-metal-oxo complexes of tetragonal (fourfold) symmetry should be electronically unstable, a rule commonly referred to as the 'oxo wall'. A few late metal-oxos have been prepared by targeting other symmetries or unusual spin states. These complexes have been studied using spectroscopic and theoretical methods. This Review describes mononuclear non-haem Fe-O and Mn-O species, the nature of the oxo wall and recent advances in the preparation of oxo complexes of Co, Ni and Cu beyond the oxo wall.

Metal-Oxyl Species and Their Possible Roles in Chemical Oxidations

Metal-oxyl (Mⁿ⁺-O^•) complexes having an oxyl radical ligand, which are electronically equivalent to well-known metal-oxo (M⁽ⁿ⁺¹⁾⁺═O) complexes, are surveyed as a new category of metal-based oxidants. Detection and characterization of Mⁿ⁺-O^• species have been made in some cases, although proposals and characterization of the species are mostly done on the basis of density functional theory (DFT) calculations. The reactivity of Mⁿ⁺-O^• complexes will provide a way to achieve potentially difficult oxidative conversion of substrates. This Viewpoint will provide state-of-the-art knowledge on the Mⁿ⁺-O^• species in terms of the formation, characterization, and DFT-based proposals to shed light on the characteristics of the intriguing oxidatively active species.

Copper-Promoted Functionalization of Organic Molecules: from Biologically Relevant Cu/O2 Model Systems to Organometallic Transformations

Copper is one of the most abundant and less toxic transition metals. Nature takes advantage of the bioavailability and rich redox chemistry of Cu to carry out oxygenase and oxidase organic transformations using O₂ (or H₂O₂) as oxidant. Inspired by the reactivity of these Cu-dependent metalloenzymes, chemists have developed synthetic protocols to functionalize organic molecules under enviormentally benign conditions. Copper also promotes other transformations usually catalyzed by 4d and 5d transition metals (Pd, Pt, Rh, etc.) such as nitrene insertions or C-C and C-heteroatom coupling reactions. In this review, we summarized the most relevant research in which copper promotes or catalyzes the functionalization of organic molecules, including biological catalysis, bioinspired model systems, and organometallic reactivity. The reaction mechanisms by which these processes take place are discussed in detail.

Theoretical Calculations on the Mechanism of Enantioselective Copper(I)-Catalyzed Addition of Enynes to Ketones

Computational investigations on the bisphospholanoethane (BPE)-ligated Cu-catalyzed enantioselective addition of enynes to ketones were performed with the density functional theory (DFT) method. Two BPE-mesitylcopper (CuMes) catalysts, BPE-CuMes and (S,S)-Ph-BPE–CuMes, were employed to probe the reaction mechanism with the emphasis on stereoselectivity. The calculations on the BPE-CuMes system indicate that the active metallized enyne intermediate acts as the catalyst for the catalytic cycle. The catalytic cycle involves two steps: (1) ketone addition to the alkene moiety of the metallized enyne; and (2) metallization of the enyne followed by the release of product with the recovery of the active metallized enyne intermediate. The first step accounts for the distribution of the products, and therefore is the stereo-controlling step in chiral systems. In the chiral (S,S)-Ph-BPE–CuMes system, the steric hindrance is vital for the distribution of products and responsible for the stereoselectivity of this reaction. The steric hindrance between the phenyl ring of the two substrates and groups at the chiral centers in the ligand skeleton is identified as the original of the stereoselectivity for the titled reaction.

Spin crossover dynamics studies on the thermally activated molecular oxygen binding mechanism on a model copper complex

The theoretical description of the primary dioxygen (O₂) binding and activation step in many copper or iron enzymes, suffers from the instrinsically electronic non-adiabaticity of the spin flip events of the triplet dioxygen molecule (³O₂), mediated by spin–orbit couplings.

Decoding the Mechanism of Intramolecular Cu-Directed Hydroxylation of sp3 C-H Bonds

The use of copper in directed C-H oxidation has been relatively underexplored. In a seminal example, Schönecker showed that copper and O2 promoted the hydroxylation of steroid-containing ligands. Recently, Baran (J. Am. Chem. Soc. 2015, 137, 13776) improved the reaction conditions to oxidize similar substrates with excellent yields. In both reports, the involvement of Cu2O2 intermediates was suggested. In this collaborative article, we studied the hydroxylation mechanism in great detail, resulting in the overhaul of the previously accepted mechanism and the development of improved reaction conditions. Extensive experimental evidence (spectroscopic characterization, kinetic analysis, intermolecular reactivity, and radical trap experiments) is provided to support each of the elementary steps proposed and the hypothesis that a key mononuclear LCuII(OOR) intermediate undergoes homolytic O-O cleavage to generate reactive RO• species, which are responsible for key C-H hydroxylation within the solvent cage. These key findings allowed the oxidation protocol to be reformulated, leading to improvements of the reaction cost, practicability, and isolated yield.

Copper-Oxygen Complexes Revisited: Structures, Spectroscopy, and Reactivity

A longstanding research goal has been to understand the nature and role of copper-oxygen intermediates within copper-containing enzymes and abiological catalysts. Synthetic chemistry has played a pivotal role in highlighting the viability of proposed intermediates and expanding the library of known copper-oxygen cores. In addition to the number of new complexes that have been synthesized since the previous reviews on this topic in this journal (Mirica, L. M.; Ottenwaelder, X.; Stack, T. D. P. Chem. Rev. 2004, 104, 1013-1046 and Lewis, E. A.; Tolman, W. B. Chem. Rev. 2004, 104, 1047-1076), the field has seen significant expansion in the (1) range of cores synthesized and characterized, (2) amount of mechanistic work performed, particularly in the area of organic substrate oxidation, and (3) use of computational methods for both the corroboration and prediction of proposed intermediates. The scope of this review has been limited to well-characterized examples of copper-oxygen species but seeks to provide a thorough picture of the spectroscopic characteristics and reactivity trends of the copper-oxygen cores discussed.

Copper-catalyzed aromatic C-H alkoxylation with alcohols under aerobic conditions

An efficient protocol for copper-catalyzed aromatic C-H alkoxylation with alcohols has been developed under aerobic conditions. The protocol provides a complementary method to couple arenes and alcohols to furnish aromatic ethers. The advantages of this method are the employment of a cheap Cu(OAc)₂ catalyst, oxygen as the terminal oxidant and alcohol as both an alkoxy reagent and a solvent. Notably, the catalytic amount of benzoic acid plays a significant role in this transformation.

[CuO](+) and [CuOH](2+) complexes: intermediates in oxidation catalysis?

Characterization of monocopper intermediates in enzymes and other catalysts that attack strong C-H bonds is important for unraveling oxidation catalysis mechanisms and, ultimately, designing new, more efficient catalytic systems. Because initially formed 1:1 Cu/O2 adducts resulting from reactions of Cu(I) sites with O2 react relatively sluggishly with substrates with strong C-H bonds, it has been suggested that reductive O-O bond scission might occur instead to yield more reactive [CuO](+) or protonated [CuOH](2+) cores. Experimental and theoretical studies of [CuO](+) species in the gas phase have provided key insights into the possible reactivity of these species, but detailed information is lacking for discrete complexes with the [CuO](+) or [CuOH](2+) core in solution or the solid state. We describe herein our recent efforts to address this issue through several disparate approaches. In one strategy based on precedent from studies of enzymes and synthetic compounds with iron-α-ketocarboxylate motifs, reactions of O2 with Cu(I)-α-ketocarboxylate complexes were explored, with the aim of identifying reaction pathways that would implicate the intermediacy of a [CuO](+) species. A second approach focused on the reaction of N-oxides with Cu(I) complexes, with the goal being to elicit O-N bond heterolysis to yield [CuO](+) complexes. For both strategies, the course of the reactions depended on the nature of the supporting bidentate N-donor ligand, and indirect evidence in support of the sought-after [CuO](+) intermediates was obtained in some instances. In the final approach discussed herein, strongly electron donating and sterically encumbered pyridine-dicarboxamide ligands (L) enabled the synthesis of [LCu(II)OH](-) complexes, which upon one-electron oxidation formed complexes with the [CuOH](2+) core that were characterized in solution. Rapid hydrogen atom abstraction (HAT) from dihydroanthracene (DHA) was observed, yielding LCu(II)OH2. The O-H bond dissociation enthalpy (BDE) of ∼90 kcal/mol for this complex was determined through evaluation of its pKa (∼19) and the [LCu(II)OH](-)/LCu(III)OH reduction potential (approximately -0.08 V vs Fc/Fc(+)). Thus, the poor oxidizing power of the complex is offset by the high basicity of the hydroxide moiety to yield a strong O-H bond. This high BDE provided a thermodynamic rationale for the rapid HAT rate from DHA and suggested that stronger C-H bonds could be attacked. Indeed, using an inert solvent (1,2-difluorobenzene), substrates with C-H bond strengths as high as 99 kcal/mol were shown to react with the [CuOH](2+) complex, and a linear log k vs C-H BDE plot supported similar HAT pathways across the series. Importantly, these results provided key evidence in favor of the possible intermediacy of this core in oxidation catalysis, and we suggest that because it is a more energetically accessible intermediate than the [CuO](+) moiety, it should be considered as an alternative in proposed mechanisms for oxidations by enzymes and other synthetic systems.

Evidence of two-state reactivity in alkane hydroxylation by Lewis-acid bound copper-nitrene complexes

The behavior of the Lewis-acid adducts of two copper-nitrene [Cu(NR)](+) complexes in nitrene-transfer and H-atom abstraction reactions have been demonstrated to depend on the nature of the nitrene substituents. Two-state reactivity, in which a singlet ground state and a nearby triplet excited-state both contribute, provides a useful model for interpreting reactivity trends of the two compounds.

Transition metal complexes and the activation of dioxygen

In order to address how diverse metalloprotein active sites, in particular those containing iron and copper, guide O₂binding and activation processes to perform diverse functions, studies of synthetic models of the active sites have been performed. These studies have led to deep, fundamental chemical insights into how O₂coordinates to mono- and multinuclear Fe and Cu centers and is reduced to superoxo, peroxo, hydroperoxo, and, after O-O bond scission, oxo species relevant to proposed intermediates in catalysis. Recent advances in understanding the various factors that influence the course of O₂activation by Fe and Cu complexes are surveyed, with an emphasis on evaluating the structure, bonding, and reactivity of intermediates involved. The discussion is guided by an overarching mechanistic paradigm, with differences in detail due to the involvement of disparate metal ions, nuclearities, geometries, and supporting ligands providing a rich tapestry of reaction pathways by which O₂is activated at Fe and Cu sites.

Conversion of carbon dioxide to oxalate by α-ketocarboxylatocopper(II) complexes

The α-ketocarboxylatocopper(II) complex [{Cu(L1)}{O2CC(O)CH(CH3)2}] can be spontaneously converted into the binuclear oxalatocopper(II) complex [{Cu(L1)}2(μ-C2O4)] upon exposure to O2/CO2 gas. (13)C-labeling experiments revealed that oxalate ions partially incorporated (13)CO2 molecules. Furthermore, the bicarbonatocopper(I) complex (NEt4)[Cu(L1){O2C(OH)}] in an Ar atmosphere and the α-ketocarboxylatocopper(I) complex Na[Cu(L1){O2CC(O)CH(CH3)2}] in an O2 atmosphere were also transformed spontaneously into the oxalato complex [{Cu(L1)}2(μ-C2O4)].

Mechanistic insights into the oxidation of substituted phenols via hydrogen atom abstraction by a cupric-superoxo complex

To obtain mechanistic insights into the inherent reactivity patterns for copper(I)-O2 adducts, a new cupric-superoxo complex [(DMM-tmpa)Cu(II)(O2(•-))](+) (2) [DMM-tmpa = tris((4-methoxy-3,5-dimethylpyridin-2-yl)methyl)amine] has been synthesized and studied in phenol oxidation-oxygenation reactions. Compound 2 is characterized by UV-vis, resonance Raman, and EPR spectroscopies. Its reactions with a series of para-substituted 2,6-di-tert-butylphenols (p-X-DTBPs) afford 2,6-di-tert-butyl-1,4-benzoquinone (DTBQ) in up to 50% yields. Significant deuterium kinetic isotope effects and a positive correlation of second-order rate constants (k2) compared to rate constants for p-X-DTBPs plus cumylperoxyl radical reactions indicate a mechanism that involves rate-limiting hydrogen atom transfer (HAT). A weak correlation of (k(B)T/e) ln k2 versus E(ox) of p-X-DTBP indicates that the HAT reactions proceed via a partial transfer of charge rather than a complete transfer of charge in the electron transfer/proton transfer pathway. Product analyses, (18)O-labeling experiments, and separate reactivity employing the 2,4,6-tri-tert-butylphenoxyl radical provide further mechanistic insights. After initial HAT, a second molar equiv of 2 couples to the phenoxyl radical initially formed, giving a Cu(II)-OO-(ArO') intermediate, which proceeds in the case of p-OR-DTBP substrates via a two-electron oxidation reaction involving hydrolysis steps which liberate H2O2 and the corresponding alcohol. By contrast, four-electron oxygenation (O-O cleavage) mainly occurs for p-R-DTBP which gives (18)O-labeled DTBQ and elimination of the R group.

Copper-catalyzed etherification of arene C-H bonds

A method for direct, auxiliary-assisted alkoxylation and phenoxylation of β-sp(2) C-H bonds of benzoic acid derivatives and γ-sp(2) C-H bonds of amine derivatives is reported. The reaction employs (CuOH)2CO3 catalyst, air as an oxidant, phenol or alcohol coupling partner, DMF, pyridine, or DMPU solvent, and K2CO3, tetramethylguanidine, or K3PO4 base at 70-130 °C.

Complete σ* intramolecular aromatic hydroxylation mechanism through O2 activation by a Schiff base macrocyclic dicopper(I) complex

In this work we analyze the whole molecular mechanism for intramolecular aromatic hydroxylation through O2 activation by a Schiff hexaazamacrocyclic dicopper(I) complex, [Cu(I) 2(bsH2m)](2+). Assisted by DFT calculations, we unravel the reaction pathway for the overall intramolecular aromatic hydroxylation, i.e., from the initial O2 reaction with the dicopper(I) species to first form a Cu(I)Cu(II)-superoxo species, the subsequent reaction with the second Cu(I) center to form a μ-η(2):η(2)-peroxo-Cu(II) 2 intermediate, the concerted peroxide O-O bond cleavage and C-O bond formation, followed finally by a proton transfer to an alpha aromatic carbon that immediately yields the product [Cu(II) 2(bsH2m-O)(μ-OH)](2+).

Lewis acid trapping of an elusive copper-tosylnitrene intermediate using scandium triflate

High-valent copper-nitrene intermediates have long been proposed to play a role in copper-catalyzed aziridination and amination reactions. However, such intermediates have eluded detection for decades, preventing the unambiguous assignments of mechanisms. Moreover, the electronic structure of the proposed copper-nitrene intermediates has also been controversially discussed in the literature. These mechanistic questions and controversy have provided tremendous motivation to probe the accessibility and reactivity of Cu(III)-NR/Cu(II)N(•)R species. In this paper, we report a breakthrough in this field that was achieved by trapping a transient copper-tosylnitrene species, 3-Sc, in the presence of scandium triflate. The sufficient stability of 3-Sc at -90 °C enabled its characterization with optical, resonance Raman, NMR, and X-ray absorption near-edge spectroscopies, which helped to establish its electronic structure as Cu(II)N(•)Ts (Ts = tosyl group) and not Cu(III)NTs. 3-Sc can initiate tosylamination of cyclohexane, thereby suggesting Cu(II)N(•)Ts cores as viable reactants in oxidation catalysis.

Spectroscopic and computational characterization of CuII-OOR (R = H or cumyl) complexes bearing a Me6-tren ligand

A copper(II)-hydroperoxo complex, [Cu(Me(6)-tren)(OOH)](+) (2), and a copper(ii)-cumylperoxo complex, [Cu(Me(6)-tren)(OOC(CH(3))(2)Ph)](+) (3), were synthesized by reacting [Cu(Me(6)-tren)(CH(3)CN)](2+) (1) with H(2)O(2) and cumyl-OOH, respectively, in the presence of triethylamine. These intermediates, 2 and 3, were successfully characterized by various physicochemical methods such as UV-vis, ESI-MS, resonance Raman and EPR spectroscopies, leading us to propose structures of the Cu(II)-OOR species with a trigonal-bipyramidal geometry. Density functional theory (DFT) calculations provided geometric and electronic configurations of 2 and 3, showing trigonal bipyramidal copper(II)-OOR geometries. These copper(II)-hydroperoxo and -cumylperoxo complexes were inactive in electrophilic and nucleophilic oxidation reactions.

Intermediates in reactions of copper(I) complexes with N-oxides: from the formation of stable adducts to oxo transfer

Reactions of copper(I) complexes of bidentate N-donor supporting ligands with pyridine- and trimethylamine-N-oxides or PhIO were explored. Key results include the identification of novel copper(I) N-oxide adducts, aryl substituent hydroxylation, and bis(mu-oxo)dicopper complex formation via a route involving oxo transfer.