Attogram sensing of trinitrotoluene with a self-assembled molecular gelator

Molecular design and architectonics towards film-based fluorescent sensing

The past few decades have witnessed encouraging progress in the development of high-performance film-based fluorescent sensors (FFSs) for detecting explosives, illicit drugs, chemical warfare agents (CWAs), and hazardous volatile organic chemicals (VOCs), among others. Several FFSs have transitioned from laboratory research to real-world applications, demonstrating their practical relevance. At the heart of FFS technology lies the sensing films, which play a crucial role in determining the analytes and the resulting signals. The selection of sensing fluorophores and the fabrication strategies employed in film construction are key factors that influence the fluorescence properties, active-layer structures, and overall sensing behaviors of these films. This review examines the progress and innovations in the research field of FFSs over the past two decades, focusing on advancements in fluorophore design and active-layer structural engineering. It underscores popular sensing fluorophore scaffolds and the dynamics of excited state processes. Additionally, it delves into six distinct categories of film fabrication technologies and strategies, providing insights into their advantages and limitations. This review further addresses important considerations such as photostability and substrate effects. Concluding with an overview of the field's challenges and prospects, it sheds light on the potential for further development in this burgeoning area.

Enhanced TNT vapor sensing through a PMMA-mediated AIPE-active monocyclometalated iridium(III) complex: a leap towards real-time monitoring

Based on the explosive nature and harmful effects of nitro-based explosive materials on living beings and the environment, it is extremely important to develop luminescence-based probe molecules for their detection with excellent selectivity and sensitivity. Two AIPE (aggregation-induced phosphorescence emission)-active iridium(III) complexes (M1 and M2) were developed for the sensitive detection of TNT in both contact and non-contact modes. The aggregate solutions of both complexes (M1 and M2 in THF/H2O, 1/9 by volume) detected TNT at the pico-molar (pM) level. These complexes showed greatly enhanced emission intensity while embedded in a PMMA(polymethyl methacrylate) matrix film. The amplified quantum efficiency, improved phosphorescence lifetime, and enhanced porous network of M2-PMMA composite helps to improve the sesitivity of TNT vapor detection. Interestingly, the sensitivity of the detection of TNT by the M2 complex was significantly improved (5-fold) in a PMMA-incorporated complex (CP) with an observed limit of detection (LOD) of 12.8 ppb. From the BET analysis of CP, it was observed that the mesoporous network of CP has an average pore diameter of 8.52 nm and a surface area of 2.03 m2 g-1. The porous network of CP assists in trapping TNT vapor in a polymeric network containing an electron-rich probe (iridium(III) complex, M2), which helps to effectively trap TNT, thus enhancing electronic communication. As a result, significant emission quenching was observed.

Tellurium Containing Long Lived Emissive Fluorophore for Selective and Visual Detection of Picric Acid through Photo-Induced Electron Transfer

A novel tellurium (Te) containing fluorophore, 1 and its nickel (2) and copper (3) containing metal organic complex (MOC) have been synthesized to exploit their structural and optical properties and to deploy these molecules as fluorescent probes for the selective and sensitive detection of picric acid (PA) over other commonly available nitro-explosives. Furthermore, density functional theory (DFT) and single crystal X-ray diffraction (SCXRD) techniques revealed the inclusion of "soft" Tellurium (Te) and "hard" Nitrogen (N), Oxygen (O) atoms in the molecular frameworks. Owing to the presence of electron rich "N" and "O" atoms along with "Te" in the molecular framework, 1 could efficiently and selectively sense PA with more than 80 % fluorescence quenching efficiency in organic medium and having detection limit of 4.60 μM. The selective detection of PA compared to other nitro-explosives follows a multi-mechanism based "turn-off" sensing which includes photo-induced electron transfer (PET), electrostatic (π-π stacking and π-anion/cation) interaction, intermolecular hydrogen bonding and inner filter effect (IFE). The test strip study also establishes the sensitivity of 1 for detection of PA.

Biomaterials in Traumatic Brain Injury: Perspectives and Challenges

Traumatic brain injury (TBI) is a leading cause of mortality and long-term impairment globally. TBI has a dynamic pathology, encompassing a variety of metabolic and molecular events that occur in two phases: primary and secondary. A forceful external blow to the brain initiates the primary phase, followed by a secondary phase that involves the release of calcium ions (Ca2+) and the initiation of a cascade of inflammatory processes, including mitochondrial dysfunction, a rise in oxidative stress, activation of glial cells, and damage to the blood-brain barrier (BBB), resulting in paracellular leakage. Currently, there are no FDA-approved drugs for TBI, but existing approaches rely on delivering micro- and macromolecular treatments, which are constrained by the BBB, poor retention, off-target toxicity, and the complex pathology of TBI. Therefore, there is a demand for innovative and alternative therapeutics with effective delivery tactics for the diagnosis and treatment of TBI. Tissue engineering, which includes the use of biomaterials, is one such alternative approach. Biomaterials, such as hydrogels, including self-assembling peptides and electrospun nanofibers, can be used alone or in combination with neuronal stem cells to induce neurite outgrowth, the differentiation of human neural stem cells, and nerve gap bridging in TBI. This review examines the inclusion of biomaterials as potential treatments for TBI, including their types, synthesis, and mechanisms of action. This review also discusses the challenges faced by the use of biomaterials in TBI, including the development of biodegradable, biocompatible, and mechanically flexible biomaterials and, if combined with stem cells, the survival rate of the transplanted stem cells. A better understanding of the mechanisms and drawbacks of these novel therapeutic approaches will help to guide the design of future TBI therapies.

To Quench or Not: Extending a β-Carboline Fluorophore for TNT Detection in Aqueous Media via Simultaneous ESPT Destabilization and AIE

Molecules relying on the excited-state intramolecular proton transfer/excited-state proton transfer (ESIPT/ESPT) mechanism are widely used in material science. In the current work, a known β-carboline-based probe TrySy was used to selectively detect explosive trinitrotoluene (TNT) in water. Compared to conventional TNT sensing, which relies mainly on the quenching of the fluorescence signal, TrySy could perform nanomolar detection of TNT via ESPT destabilization and AIE, with a significant fluorescence output. The mechanism followed was validated by computational and experimental results.

Fluorescence Quenching and the Chamber of Nitroaromatics: A Dinaphthoylated Oxacalix[4]arene's (DNOC) Adventure Captured through Computational and Experimental Study

This research presents the application of Dinaphthoylated Oxacalix[4]arene (DNOC) as a novel fluorescent receptor for the purpose of selectively detecting nitroaromatic compounds (NACs). The characterization of DNOC was conducted through the utilization of spectroscopic methods, including 1H-NMR, 13C-NMR, and ESI-MS. The receptor demonstrated significant selectivity in acetonitrile towards several nitroaromatic analytes, such as MNA, 2,4-DNT, 2,3-DNT, 1,3-DNB, 2,6-DNT, and 4-NT. This selectivity was validated by the measurement of emission spectra. The present study focuses on the examination of binding constants, employing Stern-Volmer analysis, as well as the determination of the lowest detection limit (3σ/Slope) and fluorescence quenching. These investigations aim to provide insights into the inclusion behavior of DNOC with each of the six analytes under fluorescence spectra investigation. Furthermore, the selectivity trend of the ligand DNOC for NAC detection is elucidated using Density Functional Theory (DFT) calculations conducted using the Gaussian 09 software. The examination of energy gaps existing between molecular orbitals, namely the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), provides a valuable understanding of electron-transfer processes and electronic interactions. Smaller energy gaps are indicative of heightened selectivity resulting from favorable electron-transfer processes, whereas bigger gaps suggest less selectivity attributable to weaker electronic contacts. This work integrates experimental and computational methodologies to provide a full understanding of the selective binding behavior of DNOC. As a result, DNOC emerges as a viable chemical sensor for detecting nitroaromatic explosives.

Sequence-Specific Relay Recognition of Multiple Anions: An Interplay between Proton Donors and Acceptors

Ratiometric detection of analyte is highly deserving since the technique is free from background correction. This work reports the design and synthesis of a pyridine-end oligo p-phenylenevinylene (OPV) derivative, 1 and its application in ratiometric dual-mode (both colorimetric and fluorogenic) recognition of dual anions, bisulfate (LOD=12.5 ppb) followed by fluoride (LOD=18.2 ppb) by sequence-specific relay (SPR) technique. The colorless probe turns brown with addition of bisulfate and again becomes colorless with the sequential addition of fluoride ion. In addition to such naked-eye color change, interestingly the ratiometric spectroscopic signals are reversible and evidently, the probe is reusable for several cycles. Besides, in presence of bisulfate, the protonated probe molecules, owing to their larger amphiphilic characteristics, formed self-assembled nanostructures. In addition to colorimetric and fluorescent changes, 1 H NMR titration and systematic DFT study evidently establish the underneath proton transfer mechanisms. Such reusable OPV-based chemosensor particularly with the capability of naked-eye recognition of dual anions using the SPR technique is seminal and possibly the first report in the literature.

Thermodynamics, morphology and molecular structure of molecular compounds in trisamide triarylamine organogels and pseudo-organogels

In this paper, potentially-gelling binary systems are investigated by DSC, X-ray and Electron microscopy in order to assess their gel status and the role of the Hansen solubility parameter. The low molecular weight organogelator is a Triarylamine Trisamide (TATA) while the solvents consist of a series of halogeno-ethanes and of toluene. Temperature-concentration phase diagrams are mapped out from DSC traces. They reveal the existence of one or more TATA/solvent molecular compounds. The X-ray data, that display different diffraction patterns depending on the solvent and the temperature, show the existence of different molecular structures, and thus confirm the outcome of the T-C phase diagram. Tentative molecular organizations are also discussed in light of previous results obtained in the solid state. The morphology by TEM on dilute systems, and TEM on more concentrated systems highlight the degree of physical cross-links, which leads one to regard some systems as pseudo-gels.

A luminescent Cu4 cluster film grown by electrospray deposition: a nitroaromatic vapour sensor

We present the fabrication and use of a film of a carborane-thiol-protected tetranuclear copper cluster with characteristic orange luminescence using ambient electrospray deposition (ESD). Charged microdroplets of the clusters produced by an electrospray tip deposit the clusters at an air-water interface to form a film. Different microscopic and spectroscopic techniques characterized the porous surface structure of the film. Visible and rapid quenching of the emission of the film upon exposure to 2-nitrotoluene (2-NT) vapours under ambient conditions was observed. Density functional theory (DFT) calculations established the favourable binding sites of 2-NT with the cluster. Desorption of 2-NT upon heating recovered the original luminescence, demonstrating the reusability of the sensor. Stable emission upon exposure to different organic solvents and its quenching upon exposure to 2,4-dinitrotoluene and picric acid showed selectivity of the film to nitroaromatic species.

A Gelation-Induced Enhanced Emission Active Stimuli Responsive and Superhydrophobic Organogelator: "Turn-On" Fluorogenic Detection of Cyanide and Dual-Channel Sensing of Nitroexplosives on Multiple Platforms

A pyrene-based highly emissive low-molecular-weight organogelator, [2-(4-fluorophenyl)-3-(pyren-1-yl)acrylonitrile] (F1), is presented, which divulges thixotropic and thermochromic fluorescence switching via reversible gel-to-sol transition and tremendous superhydrophobicity (mean contact angles: 149-160°), devoid of any gelling and/or hydrophobic units. The rationale for the design strategy reveals that the restricted intramolecular rotation (RIR) in J-type self-assembly promotes F1 for the prolific effects of aggregation- and gelation-induced enhanced emission (AIEE and GIEE). Meanwhile, hindrance in charge transfer via the nucleophilic reaction of cyanide (CN^-) on the C═C unit in F1 facilitates the selective fluorescence "turn-on" response in both solution [9:1 (v/v) DMSO/water] and solid state [paper kits] with significantly lower detection limits (DLs) of 37.23 nM and 13.4 pg/cm², respectively. Subsequently, F1 discloses CN^- modulated colorimetric and fluorescence "turn-off" dual-channel response for aqueous 2,4,6-trinitrophenol (PA) and 2,4-dinitrophenol (DNP) in both solution (DL = 49.98 and 44.1 nM) and solid state (DL = 114.5 and 92.05 fg/cm²). Furthermore, the fluorescent nanoaggregates of F1 in water and its xerogel films permit a rapid dual-channel "on-site" detection of PA and DNP, where the DLs ranged from nanomolar (nM) to sub-femtogram (fg) levels. Mechanistic insights reveal that the ground-state electron transfer from the fluorescent [F1-CN] ensemble to the analytes is responsible for anion driven sensory response, whereas the unusual inner filter effect (IFE) driven photoinduced electron transfer (PET) was responsible for self-assembled F1 response toward desired analytes. Additionally, the nanoaggregates and xerogel films also detect PA and DNP in their vapor phase with reasonable percentage of recovery from the soil and river water samples. Therefore, the elegant multifunctionality from a single luminogenic framework allows F1 to provide a smart pathway for achieving environmentally benign real-world applications on multiple platforms.

Multistimuli-Responsive Chromism of Vinylene-Linked Bisflavin Based on the Aggregation and Redox Properties

Multistimuli-responsive chromism was observed for vinylene-linked bisflavin 1 a with an extended π-conjugated platform. The yellow emission of a dilute solution of 1 a in CHCl₃ (0.2 mM) observed at 298 K under UV excitation was changed to orange or red emission upon (1) an increase of concentration, (2) a decrease of temperature, and (3) variation of the solvent. This is in contrast to the almost non stimuli-responsive chromism of the N-methylated bisflavin analogue 1 b and monoflavin 2 a. Mechanistic investigation by ¹ H NMR analysis under various conditions revealed that the extended π-conjugation platform and imide moiety of 1 a generate controllability in the formation of lower- and higher-ordered aggregates, which induce variation of the emission color upon change. Bisflavin 1 a also exhibited redox-induced chromism, where the orange emission of 1 a was quenched by the addition of hydrazine under anaerobic conditions, and changed back to the original emission upon subsequent bubbling of O₂ gas.

Highly Sensitive and Selective Detection of Melatonin in Biofluids by Antipyrine Based Fluorophore

A simple fluorescent based organic fluorophore was synthesized and it shows significant fluorescent intensity with melatonin (MLN). Hence, it was applicable to the detection of MLN by colorimetric and fluorimetric techniques at neutral pH. Under optimized experimental condition, the synthesized organic fluorophore detects MLN selectively in the presence of other interfering biomolecules through ICT mechanism. The melatonin sensing mechanism is supported by DFT and ¹H-NMR titration. Based on the findings, this method can be applied to design a simple clinical diagnostic tool for MLN.

Sugar-Based Phase-Selective Supramolecular Self-Assembly System for Dye Removal and Selective Detection of Cu2+ Ions

Simple, effective, and eco-friendly sugar-based phase-selective gelators were synthesized at a low cost. They showed high gelling ability toward a wide range of solvents at lower concentrations (minimum gelation concentration ∼0.3%). Preliminary tests reveal that these low molecular weight organogelators can immediately and phase-selectively gel benzene, toluene, petrol, and kerosene in water at room temperature. We also identified G13 in toluene as the good gelator, and the corresponding organogel proficiently removes water-soluble dyes from their concentrated aqueous solutions. This efficient removal of toxic organic solvents and dyes from water suggests promising applications in removing organic substances from contaminated water resources. The thermoreversible gel exhibits effective rechargeability up to five cycles of burning and gelation, which imply the flame stability of the gel. Interestingly, these compounds had a high detection ability toward Cu²⁺ ions with a state change from gel to the solution. The physical justification for gelation mechanisms and the molecular interaction with metal ions were further confirmed by computational studies.

Synthesis and Self-assembly of Novel Nanofeather-like Fluorescent Alkyloxy-Containing Diphenyl Ether Organogelators

In this study, novel fluorescent low molecular-weight organogelators are derived from diphenyl ethers and substituted with para-alkoxy groups of different aliphatic chain lengths. The present research promotes the preparation of innovative nanofeather-like assemblies from the synthesized diphenyl ether-derived organogelators. The gelation performance of the prepared alkoxy-substituted diphenyl ethers was reported. The synthesis procedure was achieved by using a base-catalyzed reaction of hydroxyl-substituted diphenyl with various alcohols of different aliphatic chain lengths. The chemical structures of the synthesized diphenyl ether derivatives were studied by ¹H/¹³C NMR and infrared spectroscopy. Fluorescence and UV-vis absorption spectral analyses showed solvatochromism. The diphenyl ether derivatives with longer alkoxy terminal substituents showed enhanced thermoreversible gelation activity as compared to the diphenyl ether derivatives with shorter alkoxy terminal substituents. The morphological properties of the self-assembled diphenyl ethers were studied by transmission electron microscopy and scanning electron microscopy, which showed supramolecular architectures of highly ordered nanofeathers, enforced by van der Waals interactions and π-stacks. Depending on the length of the aliphatic tail, different morphologies were detected, including nanofeathers, nanofibers, and nanosheets. The antimicrobial and cytotoxic properties of the prepared diphenyl ether-derived organogelators were examined to confirm their possible use in various fields like drug delivery systems.

Effect of solvent isomers on the gelation properties of tri-aryl amine organogels and their hybrid thermoreversible gels with poly[vinyl chloride]

The gelation properties of tri-aryl amine (TATA) in two isomers of dichlorobenzene, namely ortho-dichlorobenzene (o-DCB) and meta-dichlorobenzene (m-DCB), have been studied by calorimetry for mapping out the temperature-concentration phase diagram. It is shown that both systems behave differently, yet both form molecular compounds. The occurrence of these compounds is further demonstrated by neutron diffraction in o-DCB. Depending on the isomer used, X-ray investigations highlight a difference in the position of the diffraction peaks. The morphology observed by scanning electron microscopy reveals fibrillar systems in both cases, yet the fibrils' cross-sections are far larger in m-DCB with respect to o-DCB. The body of these results is discussed in light of current opinions on the role of the solvent. Ternary gels obtained with PVC have also been investigated by means of the same experimental approach. Calorimetry investigations and X-ray diffraction data show no significant difference for the behavior of the TATA moiety. The morphology studied by scanning electron microscopy allows one to distinguish clearly the TATA fibrils and the PVC network. This again confirms the possibility of preparing functional materials with an organogelator and a polymer through the making of hybrid gels.

A croconate-directed supramolecular self-healable Cd(II)-metallogel with dispersed 2D-nanosheets of hexagonal boron nitride: a comparative outcome of the charge-transport phenomena and non-linear rectifying behaviour of semiconducting diodes

The use of croconic acid disodium salt (CADS) as an organic gelator with Cd(II) salt to obtain an efficient soft-scaffold supramolecular self-healable metallogel (Cd-CADS) in N,N-dimethyl formamide (DMF) media was investigated following an ultrasonication technique. The experimentally scrutinized rheological values of the fabricated metallogel not only revealed the visco-elastic property and mechanical stiffness, but also exposed the self-healable behaviour of the gel material. Two-dimensional (2D) nanosheets of hexagonal boron nitride (h-BN) were incorporated within the gel network to obtain a 2D nanosheet dispersed metallogel of Cd(II) croconate (h-BN@Cd-CADS). The microstructural investigations of the original gel network and hexagonal boron nitride (h-BN) 2D nanosheet dispersed gel-network were performed through field emission scanning electron microscopy (FESEM) and established the interconnecting rod-like fibrous type morphological patterns and inter-connected hexagonal type rod-shaped architecture pattern, respectively. High resolution transmission electron microscopy (HRTEM) was used to visualize the morphological distinction of the Cd-CADS metallogel with the h-BN 2D nanosheets. The infrared spectral (FT-IR) outputs helped to identify the formation pathway to construct the semi-solid self-healing flexible metallogel and h-BN 2D nanosheet dispersed metallogel nanocomposite, respectively. Fascinating electronic-charge transportation was revealed in the as-fabricated Cd-CADS and h-BN@Cd-CADS metallogel-based devices. Furthermore, h-BN 2D-nanosheet-directed modulation of the non-linear rectifying feature of the supramolecular Cd-CADS-metallogel was observed, with the h-BN@Cd-CADS metallogel showing a greater rectifying property, implying that it has a higher conductivity compared to the Cd-CADS metallogel.

Supramolecular polymer gels: from construction methods to functionality

Supramolecular polymer gels (SPGs) are precisely designed gels brought together by noncovalent interactions to form three-dimensional network structures of polymers. SPGs combine the merits of supramolecular polymers and gels, such as stimuli-responsiveness, self-healing, and self-adaptation, which endows SPGs with potential application value in the fields of biomaterials, etc. Recently, much effort has been made to design new SPGs and related materials with high performance. Herein, we review the research endeavor and future directions of SPGs depending on the construction methods, topological structures, stimuli-responsiveness, and functionality. We hope that the review will provide reference values for the researchers working in supramolecular chemistry and gels.

Exploring the Aggregation and Light-Harvesting Aptitude of Naphthalimide-Based Amphiphile and Non-amphiphile AIEgen

Herein, we report a comparative study of two naphthalimide-tethered amphiphile and non-amphiphile with their aggregation-induced emission properties. A synthetic modulation of a hydrophobic tail on the framework repressed the ACQ-phoric fluorophore to an AIEgen. L₁ and L₂ remain in the dispersed form in DMF and exhibits aggregation and intense emission signal in aqueous media. Microscopy detailing of the aggregating process has been analyzed. Not only the AIEgens are emissive in water but also they are emissive in the solid state. The natural light-harvesting process is mimicked by the aggregated state, establishing an energy transfer process between L₁ and commercial dye. Disaggregation of the AIEgen has also been utilized in the detection of nitroaromatics. Analytical utility of the AIE-gen is being demonstrated concerning the detection of explosives in aqueous media.

Conductive Gels: Properties and Applications of Nanoelectronics

Conductive gels are a special class of soft materials. They harness the 3D micro/nanostructures of gels with the electrical and optical properties of semiconductors, producing excellent novel attributes, like the formation of an intricate network of conducting micro/nanostructures that facilitates the easy movement of charge carriers. Conductive gels encompass interesting properties, like adhesion, porosity, swelling, and good mechanical properties compared to those of bulk conducting polymers. The porous structure of the gels allows the easy diffusion of ions and molecules and the swelling nature provides an effective interface between molecular chains and solution phases, whereas good mechanical properties enable their practical applications. Due to these excellent assets, conductive gels are promising candidates for applications like energy conversion and storage, sensors, medical and biodevices, actuators, superhydrophobic coatings, etc. Conductive gels offer promising applications, e.g., as soft sensors, energy storage, and wearable electronics. Hydrogels with ionic species have some potential in this area. However, they suffer from dehydration due to evaporation when exposed to the air which limits their applications and lifespan. In addition to conductive polymers and organic charge transfer complexes, there is another class of organic matter called "conductive gels" that are used in the organic nanoelectronics industry. The main features of this family of organic materials include controllable photoluminescence, use in photon upconversion technology, and storage of optical energy and its conversion into electricity. Various parameters change the electronic and optical behaviors of these materials, which can be changed by controlling some of the structural and chemical parameters of conductive gels, their electronic and optical behaviors depending on the applications. If the conjugated molecules with π bonds come together spontaneously, in a relative order, to form non-covalent bonds, they form a gel-like structure that has photoluminescence properties. The reason for this is the possibility of excitation of highest occupied molecular orbital level electrons of these molecules due to the collision of landing photons and their transfer to the lowest unoccupied molecular orbital level. This property can be used in various nanoelectronic applications such as field-effect organic transistors, organic solar cells, and sensors to detect explosives. In this paper, the general introduction of conductive or conjugated gels with π bonds is discussed and some of the physical issues surrounding electron excitation due to incident radiation and the mobility of charge carriers, the position, and role of conductive gels in each of these applications are discussed.

Evidence by neutron diffraction of molecular compounds in triarylamine tris-amide organogels and in their hybrid thermoreversible gels with PVC

We report on neutron diffraction experiments performed on organogels prepared from triarylamine tris-amide (TATA), as well as on their ternary thermoreversible gels made up with poly[vinyl chloride] (PVC). Three different solvents together with their deuterated counterparts have been used; tetrachloroethane, wherein TATA fibrils display ohmic conductivity, bromobenzene and o-dichlorobenzene. The TATA crystal structure differs in the three solvents. Most importantly, the difference in the diffraction patterns whether hydrogenous solvents or deuterated solvents are used demonstrate the occurrence of molecular compounds. Tentative unit cells are presented. These results are also discussed in the light of the current views on the solvent role in the gelation process.

Emergent Photostability Synchronization in Coassembled Array Members for the Steady Multiple Discrimination of Explosives

The design of sensor array members with synchronous fluorescence and photostability is crucial to the reliable performance of sensor arrays in multiple detections and their service life. Herein, a strategy is reported for achieving synchronous fluorescence and photostability on two coassemblies fabricated from carbazole-based energy donor hosts and a photostable energy acceptor. When a small number of the same energy acceptors are embedded into two carbazole-based energy donor hosts, the excitation energy of the donors can be efficiently harvested by the acceptors through long-range exciton migration and Förster resonance energy transfer (FRET) to achieve synchronous fluorescence and photostability in both coassemblies. More intriguingly, the synchronous photostability substantially improves the multiple discrimination capacity (e.g., 10 times more discriminations of TNT in two coassemblies have been achieved compared to the sensor array comprising two individual donor assemblies) and the working lifetime of the sensor array. The concept of optical synchronization (i.e., emission and photostability) of sensor array members can be extended to other sensor arrays for the steady multiple detection of certain hazardous chemicals.

Preparation of Tris-Tetrazole-Based Metallogels and Stabilization of Silver Nanoparticles: Studies on Reduction Catalysis and Self-Healing Property

An ionic multifunctional gelator molecule triethylammonium 5-(3,5-bis((1H-tetrazol-5-yl)carbamoyl)benzamido)tetrazol-1-ide G7 is synthesized and characterized by spectroscopic tools and mass spectrometry. G7 tends to form a stable organogel in a mixture of N,N-dimethylformamide/dimethylsulfoxide (DMF/DMSO) and water. Introduction of different metal perchlorate salts in a DMSO solution of G7 furnished a series of metallogels M¹G7, M²G7, M³G7, M⁴G7, M⁵G7, M⁶G7, and M⁷G7 [M¹ = Fe(III), M² = Co(II), M³ = Cu(II), M⁴ = Zn(II), M⁵ = Ag(I), M⁶ = Ni, and M⁷ = Fe(II)]. Among them, M¹G7, M³G7, M⁴G7, M⁶G7, and M⁷G7 help individually in the synthesis and stabilization of bimetallic nanocomposites containing silver nanoparticles (AgNPs). Iron(III)-containing nanocomposites M¹G7AgNPs have been utilized in the form of catalysts in the reduction reaction of nitroaromatic compounds to corresponding amines with a quantitative yield. The organogel G7 has also shown the abilities to absorb different metal ions from aqueous solutions and allow selective transition of M¹G7 from the gel state to the crystalline state. Fe(III) formed dual metallogels with Zn(II), which can be used for further applications. Furthermore, the nanocomposite M¹G7AgNP powder, in the presence of the organogel G7, gets converted into a nanostructured metallogel, which shows exclusive self-healing properties. This is the first example where a nanocomposite powder contains the dual-metal system (Fe(III) and Ag(0)) and shows a reduction catalytic property, and its nanostructured dual-metallogel form manifests the self-healing property in a fabricated metallogel.

Molecular Engineering onto RuII Bis(1,2-diphenylphosphinoethane) Synthon: Toward an Original Organometallic Gelator

In this article, we report the successful molecular engineering of Ru bis-acetylides that led for the first time to a gelator and more specifically in aromatic solvents. By means of a nonlinear ligand and an extended aromatic platform, the bulky Ru bis-acetylides were able to self-assemble into lamellar structures as evidenced by scanning electron microscopy (SEM) in benzene, toluene, and o- and m-xylene, which in turn induced gelation of the solution with a critical gelation concentration of 30 mg/mL. Nuclear magnetic resonance (NMR), variable temperature (VT)-NMR, and Fourier transform infrared (FT-IR) spectroscopies evidenced that hydrogen bonds are mainly responsible for the self-organization. VT-NMR and small-angle X-ray scattering (SAXS) have also suggested that the pro-ligand and the complex stack in different ways.

An excimer to exciplex transition through realization of donor-acceptor interactions in luminescent solvent-free liquids

Luminescent solvent-free organic liquids are known for their enhanced quantum yield, color tunability, and availability of a matrix for other dopants to generate hybrid luminescent materials with improved features for newer applications. Herein, we report a donor-acceptor based luminescent "exciplex liquid" by utilizing the slightly different electron affinity of the acceptor molecules. A red-shifted broad exciplex emission exhibited by the donor-acceptor pair even at a lower concentration of the acceptor (0.001 equiv.) indicates high efficiency in the solvent-free state. A detailed NMR study revealed weak intermolecular interactions between the donor and acceptor in the solvent-free matrix that stabilizes the exciplex liquid. The failure of structurally similar solid counterparts to form an exciplex confirms the advantage of the available supportive liquid matrix. Besides, the luminescent exciplex liquid is found efficient in sensing application, which is unachievable by either the individual liquids or their solid counterparts. Here, a transition of a donor-acceptor pair from a solid to solvent-free liquid results in a new hybrid liquid that can be an alternative for solid sensor materials.

Physical Aspects of Organogelation: A Point of View

The physics side of organogelation is broached through three main aspects, thermodynamics (formation and melting), structure (morphology and molecular organization), and rheology. A definition of a gel is first discussed so as to delimit the field of investigation; namely, systems constituted of fibril-like entities. It is again highlighted that gel formation occurs through first-order transitions, chiefly by homogeneous nucleation. A deeper knowledge of the system is thus achieved by mapping out the temperature–concentration phase diagram. Some experimental diagrams are shown, while diagrams likely to pertain to these systems are presented. The molecular arrangement is basically crystallization that occurs in a preferred direction, hence the formation of fibrils. The effects of the solvent type, the quenching process of the solution are discussed with respect to the morphology and the crystal structure. Finally, the rheological properties are tackled. Notions of critical gelation concentration and percolation are debated. The interest of mapping out the temperature–concentration phase diagram is emphasized, particularly for understanding the variation of the gel modulus with temperature.

High-Performance Sensing of Formic Acid Vapor Enabled by a Newly Developed Nanofilm-Based Fluorescent Sensor

Although it is widely used in industry and food products, formic acid can be dangerous owing to its corrosive properties. Accurate determination of formic acid would not only benefit its qualified uses but also be an effective way to avoid corrosion or injury from inhalation, swallowing, or touching. Herein, we present a nanofilm-based fluorescent sensor for formic acid vapor detection with a wide response range, fast response speed, and high sensitivity and selectivity. The nanofilm was synthesized at a humid air/dimethyl sulfoxide (DMSO) interface through dynamic covalent condensation between two typically designed building blocks, de-tert-butyl calix[4]arene-tetrahydrazide (CATH) and 4,4',4″,4‴-(ethene-1,1,2,2-tetrayl)tetra-benzaldehyde (ETBA). The as-prepared nanofilm is uniform, flexible, fluorescent, and photochemically stable. The thickness and fluorescence intensity of the nanofilm can be facilely adjusted by varying the concentration of the building blocks and the sensing performance of the nanofilm can be optimized accordingly. Based on the nanofilm, a fluorescent sensor with a wide response range (4.4 ppt-4400 ppm) for real-time and online detection of formic acid vapor was built. With the sensor, a trace amount (0.01%) of formic acid in petroleum ether (60-90 °C) can be detected within 3 s. Besides, fluorescence quenching of the nanofilm by formic acid vapor can be visualized. It is believed that the sensor based on the nanofilm would find real-life applications in corrosion and injury prevention from formic acid.

Sensitive detection of 2,4,6-trinitrotoluene utilizing fluorescent sensor from carbon dots and reusable magnetic core-shell nanomaterial

Carbon dots have been a promising nano-carbon material with many advantages, and attracted many more attentions. This study designed a new chemosensor integrating the strong fluorescent property of carbon dots and the magnetism of amino-functionalized magnetic core-shell nanomaterial, Fe@SiO₂-NH₂ for determination of 2,4,6-trinitrotoluene (TNT). In this system, fluorescent carbon dots interacted with amino groups on the surface of amino-functionalized magnetic core-shell nanomaterial leading to fluorescence quenching of carbon dots, appearance of TNT competitively replaced of carbon dots on the surface of the magnetic material through forming a Meisenheimer complex. This sensor exhibits excellent selectivity and sensitivity for TNT, and which provided a good dynamic linear range for TNT from 10 to 2000 ng mL^-1. The experiments demonstrate a low detection limit of 2.15 ng mL^-1. The intra-day precisions for 25, 100 and 500 ng mL^-1 were 4.6, 2.3 and 0.5% (RSD, n = 6), inter-day precisions for 25, 100 and 500 ng mL^-1 were 4.2, 2.5 and 0.9% (RSD, n = 6), respectively. The developed sensor was validated with river water, dust, and soil samples, and the achieved spiked recoveries were immensely satisfied from 98.1% to 102.0%. The Fe@SiO₂-NH₂ possessed excellent reusability. This sensor exhibits that it is simple, sensitive and selective, and will be a vital analytical tool for TNT in many fields.

Synthesis and characterization of novel fluoroterphenyls: self-assembly of low-molecular-weight fluorescent organogel

Nucleophilic aromatic substitution has been highly para selective on a range of functionalized pentafluorobenzenes. Here, we demonstrate the utility of nucleophilic aromatic substitution chemistry for the preparation of fluorinated fluorescent low-molecular-weight organogels. The molecular design, synthesis and photophysical performance of a new class of thermoreversible and fluorescent low-molecular-weight organogels from para-alkoxy-functionalized fluorinated terphenyls are described. Both CuI-catalyzed decarboxylative cross-coupling and nucleophilic aromatic substitution chemistry were used for the preparation of those highly fluorinated gelators in high yields and excellent purity via simple filtration, from the corresponding potassium fluorobenzoate salts and aryl iodides. Various fluorinated symmetrical and asymmetrical para terphenyls were prepared with various para terminal alkoxy tails. Those fluorinated terphenyls were characterized using X-ray crystallography, differential scanning calorimetry, Fourier-transform infrared spectroscopy, as well as ¹ H, ¹³ C, and ¹⁹ F nuclear magnetic resonance. UV-visible light absorbance and emission spectra of those new materials displayed a solvatochromic and solvatofluorochromic behaviour, respectively. Self-assembly of the produced fluorinated terphenyls occurred via cooperative π-π stacking and van der Waals interactions, which resulted in gelating various organic solvents. Scanning electron microscopy displayed the formation of fibre-like nanostructures. The cytotoxicity of some selected fluorinated symmetrical and asymmetrical para terphenyls was explored.

Self-Assembled Photonic Microsensors with Strong Aggregation-Induced Emission for Ultra-Trace Quantitative Detection

Ultratrace quantitative detection based on fluorescence is highly desirable for many important applications such as environmental monitoring or disease diagnosis, which however has remained a great challenge because of limited and irregular fluorescence responses to analytes at ultralow concentrations. Herein the problem is circumvented via local enrichment and detection of analytes within a microsensor, that is, photonic porous microspheres grafted with aggregation-induced emission gens (AIEgens). The obtained microspheres exhibit dual structural and molecular functions, namely, bright structural colors and strong fluorescence. Large fluorescence quenching induced by nitrophenol compounds in an aqueous environment is observed at ultralow concentrations (10^-12-10^-8 mol/L), enabling quantitative detection at a ppb level (ng/L). This is achieved within a porous structure with good connectivity between the nanopores to improve analyte diffusion, an internal layer of poly(ethylene oxide) (PEO) for analyte enrichment via hydrogen bonding, and homogeneous distribution of AIEgens within the PEO layer for enhanced fluorescence quenching. The fluorescent porous microspheres can be readily obtained in a single step templated by well-ordered water-in-oil-in-water double emulsion droplets with AIE amphiphilic bottlebrush block copolymers as the effective stabilizer.

Luminescent Behavior of Gels and Sols Comprised of Molecular Gelators

We present a brief review of some important conceptual and practical aspects for the design and properties of molecular luminescent gelators and their gels. Topics considered include structural and dynamic aspects of the gels, including factors important to their ability to emit radiation from electronically excited states.

Long-Range Exciton Migration in Coassemblies: Achieving High Photostability without Disrupting the Electron Donation of Fluorene Oligomers

In this work, photostable coassemblies from a nonphotostable fluorene oligomer (the energy donor) and a photostable oligomer (the energy acceptor) are fabricated. Long-range exciton migration over a net distance of about 370 energy-donor molecules to energy acceptors is demonstrated in such coassemblies. The fast and long energy migration allows harvesting of the excitation energy of energy donors by embedding a small number of energy acceptors for photostability enhancement. Importantly, embedding a small number of energy acceptors in coassemblies causes a negligible negative influence on the electron donation of energy donors that are desired in practical applications. The advantages of the coassemblies fabricated, that is, high photostability without disrupting the electron donation of energy donors, are well illustrated in fluorescence detection of trace explosives where prolonged working life and improved detection capacity are achieved.

Theoretical and Experimental Insights into the Self-Assembly and Ion Response Mechanisms of Tripodal Quinolinamido-Based Supramolecular Organogels

The exploration and understanding of self-assembly and stimuli-responsive mechanisms of supramolecular systems are of fundamental importance for researchers to plan syntheses reasonably. Herein, the self-assembly and ions responsive mechanisms of a tripodal quinolinamido-based supramolecular organogel (TBT-gel) were investigated through experiments and theoretical calculations including independent gradient model (IGM), localized orbitals locator (LOL) and hole-electron theory. According to these studies, the self-assembly mechanism of TBT-gel was based on strong threefold H-bonding and π-π interactions, which induced the TBT forming helical, one-dimensional supramolecular polymer. After addition of Fe³⁺ into the TBT-gel, the one-dimensional supramolecular polymer had been crosslinked by the Fe³⁺ through coordination interaction and formed a metallogel (TBT-Fe-gel). Interestingly, the TBT-gel showed selective fluorescent response for Fe³⁺ and F^- based on a competitive coordination mechanism. Moreover, the study on fluorescence responsive mechanism of TBT-gel for Fe³⁺ and F^- implied the ICT mode governs both the electron excitation and de-excitation processes. The calculated results were in agreement with the corresponding experimental results. Notably, the quantum chemical calculations provided a deep understanding and visualized presentation of the assembly and stimuli-responsive mechanisms.

Controlling fluorescence resonance energy transfer of donor–acceptor dyes by Diels–Alder dynamic covalent bonds

Two new dyes, consisting of an aromatic amine donor and dansyl acceptor connected by Diels–Alder bonds, display a switchable energy transfer. Dynamic covalent properties enable the mutual conversion of the two dyes by maleimide exchanges.

Ratiometric Turn-On Fluorophore Displacement Ensembles for Nitroaromatic Explosives Detection

There is a recognized need in the area of explosives detection for fluorescence-based sensing systems that are capable of not only producing a turn-on response but also generating a distinctive spectral signature for a given analyte. Here, we report several supramolecular ensembles displaying efficient fluorophore displacement that give rise to an increase in fluorescence intensity upon exposure to various nitroaromatic compounds. The synthetic supramolecular constructs in question consist of a tetrathiafulvalene (TTF)-based pyrrolic macrocycle, benzo-TTF-calix[4]pyrrole (Bz-TTF-C4P), and fluorescent dyes, monomeric or dimeric naphthalenediimide (NDI) and perylenediimide (PDI) derivatives, as well as chloride or hexafluorophosphate (PF₆^-) salts of rhodamine 6G (Rh-6G). In chloroform solution, these assemblies exist in the form of discrete supramolecular complexes or oligomeric aggregates depending on the specific dye combinations in question. Each ensemble was tested as a potential explosive-responsive fluorescence indicator displacement assay (FIDA) by challenging it with a series of di- and trinitroaromatic compounds and examining the change in fluorescence spectral characteristics. Upon addition of nitroaromatic compounds (NACs), either a "turn-on" or a "turn-off" fluorescent response was observed depending on the nature of the constituent fluorophore and, where applicable, the counteranion. The FIDAs based on the PDI derivatives were found to display not only a ratiometric fluorescence enhancement but also analyte-dependent spectral changes when treated with NACs. The NAC-induced fluorescence spectral response of each ensemble was rationalized on the basis of various solution-phase spectroscopic studies, as well as single-crystal X-ray diffraction analyses.

Facile Microwave-Assisted Synthesis of Functionalized Carbon Nitride Quantum Dots as Fluorescence Probe for Fast and Highly Selective Detection of 2,4,6-Trinitrophenol

Functionalized carbon nitride quantum dots (CNQDs) are fabricated by moderate carbonization of L-tartaric acid and urea in oil acid media by a facile microwave-assisted solvothermal method. The obtained CNQDs are monodispersed with a narrow size distribution (average size of 3.5 nm), and exhibit excellent selectivity and sensitivity of fluorescence quenching for 2,4,6-trinitrophenol (TNP) with a quenching efficiency coefficient K_sv of 4.75 × 10⁴ M^-1. This sensing system exhibits a fast response time within 1 min and a wide linear response range from 0.1 to 15 μM. The limit of detection is as low as 87 nM, which is comparable or lower than the other probes. The application of the developed probe to the detection of TNP in spiked water samples yields satisfactory results. The mechanism of fluorescence quenching is also discussed. Graphical Abstract An optical sensor based on functionalized carbon nitride quantum dots (CNQDs) were fabricated from L-tartaric acid and urea by a facile one-pot microwave-assisted solvothermal method, and were effectively utilized to the detection of 2,4,6-trinitrophenol (TNP) based on fluorescence (FL) quenching.

Fast Detection of 2,4,6-Trinitrotoluene (TNT) at ppt Level by a Laser-Induced Immunofluorometric Biosensor

The illegal use of explosives by terrorists and other criminals is an increasing issue in public spaces, such as airports, railway stations, highways, sports venues, theaters, and other large buildings. Security in these environments can be achieved by different means, including the installation of scanners and other analytical devices to detect ultra-small traces of explosives in a very short time-frame to be able to take action as early as possible to prevent the detonation of such devices. Unfortunately, an ideal explosive detection system still does not exist, which means that a compromise is needed in practice. Most detection devices lack the extreme analytical sensitivity, which is nevertheless necessary due to the low vapor pressure of nearly all explosives. In addition, the rate of false positives needs to be virtually zero, which is also very difficult to achieve. Here we present an immunosensor system based on kinetic competition, which is known to be very fast and may even overcome affinity limitation, which impairs the performance of many traditional competitive assays. This immunosensor consists of a monolithic glass column with a vast excess of immobilized hapten, which traps the fluorescently labeled antibody as long as no explosive is present. In the case of the explosive 2,4,6-trinitrotoluene (TNT), some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled complementary metal-oxide-semiconductor (CMOS) camera. Liquid handling is performed with high-precision syringe pumps and chip-based mixing-devices and flow-cells. The system achieved limits of detection of 1 pM (1 ppt) of the fluorescent label and around 100 pM (20 ppt) of TNT. The total assay time is less than 8 min. A cross-reactivity test with 5000 pM solutions showed no signal by pentaerythritol tetranitrate (PETN), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX). This immunosensor belongs to the most sensitive and fastest detectors for TNT with no significant cross-reactivity by non-related compounds. The consumption of the labeled antibody is surprisingly low: 1 mg of the reagent would be sufficient for more than one year of continuous biosensor operation.