Selective electrocatalytic reduction of CO2 to formate by water-stable iridium dihydride pincer complexes

Pressure-induced generation of heterogeneous electrocatalytic metal hydride surfaces for sustainable hydrogen transfer

Metal hydrides are crucial intermediates in numerous catalytic reactions. Intensive efforts have been dedicated to constructing molecular metal hydrides, where toxic precursors and delicate mediators are usually involved. Herein, we demonstrate a facile pressure-induced methodology to generate a cost-effective heterogeneous electrocatalytic metal hydride surface for sustainable hydrogen transfer. Taking carbon dioxide (CO2) electroreduction as a model system and zinc (Zn), a well-known carbon monoxide (CO)-selective catalyst, as a model catalyst, we showcase a homogeneous-type hydrogen atom transfer process induced by heterogeneous hydride surfaces, enabling direct hydrogenation pathways traditionally considered "prohibited". Specifically, the maximal Faradaic efficiency for formate is enhanced by ~fivefold to 83% under ambient conditions. Experimental and theoretical analyses reveal that unlike the distal hydrogenation route for CO2 to CO over pristine Zn, the Zn hydride surface enables direct hydrogenation at the carbon site of CO2 to form formate. This work provides a promising material platform for sustainable synthesis.

Catalyst-Free Transformation of Carbon Dioxide to Small Organic Compounds in Water Microdroplets Nebulized by Different Gases

A straightforward nebulized spray system is designed to explore the hydrogenation of carbon dioxide (CO2) within water microdroplets surrounded by different gases such as carbon dioxide, nitrogen, oxygen, and compressed air. The collected droplets are analyzed using water-suppressed nuclear magnetic resonance (NMR). Formate anion (HCOO-), acetate anion (CH3COO-), ethylene glycol (HOCH2CH2OH), and methane (CH4) are detected when water is nebulized. This pattern persisted when the water is saturated with CO2, indicating that CO2 in the nebulizing gas triggers the formation of these small organics. In a pure CO2 atmosphere, the formate anion concentration is determined to be ≈70 µm, referenced to dimethyl sulfoxide, which has been introduced as an internal standard in the collected water droplets. This study highlights the power of water microdroplets to initiate unexpected chemistry for the transformation of CO2 to small organic compounds.

Electrocatalytic Transfer Hydrogenation of 1-Octene with [(tBuPCP)Ir(H)(Cl)] and Water

Electrocatalytic hydrogenation of 1-octene as non-activated model substrate with neutral water as H-donor is reported, using [(tBuPCP)Ir(H)(Cl)] (1) as the catalyst, to form octane with high faradaic efficiency (FE) of 96 % and a kobs of 87 s-1. Cyclic voltammetry with 1 revealed that two subsequent reductions trigger the elimination of Cl- and afford the highly reactive anionic Ir(I) hydride complex [(tBuPCP)Ir(H)]- (2), a previously merely proposed intermediate for which we now report first experimental data by mass spectrometry. In absence of alkene, the stoichiometric electrolysis of 1 in THF with water selectively affords the Ir(III) dihydride complex [(tBuPCP)Ir(H)2] (3) in 88 % FE from the reaction of 2 with H2O. Complex 3 then hydrogenates the alkene in classical fashion. The presented electro-hydrogenation works with extremely high FE, because the iridium hydrides are water stable, which prevents H2 formation. Even in strongly alkaline conditions (Bu4NOH added), the electro-hydrogenation of 1-octene with 1 also proceeds cleanly (89 % FE), suggesting a highly robust process that may rely on H2O activation, reminiscent to transfer hydrogenation pathways, instead of classical H+ reduction. DFT calculations confirmed oxidative addition of H2O as a key step in this context.

(Me4N)2[Pt(CO3)2(OH)2]: The Isolated PtIVO6 Carbonato-Complex

The first fully inorganic Pt(IV) carbonato-complex trans-[Pt(CO3)2(OH)2]2- with a {PtO6} coordination sphere was isolated as the (Me4N)2[Pt(CO3)2(OH)2] (1) salt. The compound 1 was characterized using single-crystal and powder X-ray diffraction, Raman spectroscopy, infrared spectroscopy (FTIR), electrospray ionization mass spectrometry (ESI-MS), nuclear magnetic resonance spectroscopy (NMR), and thermogravimetric analysis (TG). Density functional theory (DFT) calculations were also performed to analyze the spectral features of the complex. 1 crystallizes in the triclinic system (P-1) with a Z of 1. The trans-[Pt(CO3)2(OH)2]2- anion has axial hydroxo ligands and κ2-CO3 ligands, which form an equatorial plane. This anionic complex exhibits notable stability in aqueous solutions, while the axial hydroxo ligand can be readily modified, as exemplified by the acylation of the trans-[Pt(CO3)2(OH)2]2- into trans-[Pt(CO3)2(OAc)2]2- anion. Furthermore, it has been shown that rigid and glittering platinum coatings can be electrochemically deposited from an aqueous solution of 1 without the addition of surfactants.

Electrocatalytic CO2 reduction to formate by a cobalt phosphino-thiolate complex

Electrochemical conversion of CO2 to value-added products serves as an attractive method to store renewable energy as energy-dense fuels. Selectivity in this type of conversion can be limited, often leading to the formation of side products such as H2. The activity of a cobalt phosphino-thiolate complex ([Co(triphos)(bdt)]+) towards the selective reduction of CO2 to formate is explored in this report. In the presence of H2O, selective production of formate (as high as 94%) is observed at overpotentials of 750 mV, displaying negligible current degradation during long-term electrolysis experiments ranging as long as 24 hours. Chemical reduction studies of [Co(triphos)(bdt)]+ indicates deligation of the apical phosphine moiety is likely before catalysis. Computational and experimental results suggest a metal-hydride pathway, indicating an ECEC based mechanism.

Photocatalytic conversion of CO2 to CO by Ru(II) and Os(II) octahedral complexes: a DFT/TDDFT study

The reaction mechanisms of the photocatalytic reduction of CO2 to CO catalyzed by [(en)M(CO)3Cl] complexes (M = Ru, Os, en = ethylenediamine) in the presence of triethanolamine (TEOA), R3N (R = -CH2CH2OH), in DCM and DMF solvents, were studied by means of DFT/TDDFT electronic structure calculations. The geometric and free energy reaction profiles for two possible reaction pathways were calculated. Both reaction pathways studied, start with the 17e-, catalytically active intermediate, [(en)M(CO)3]˙+ generated from the first triplet excited state, T1 upon reductive quenching by TEOA which acts as a sacrificial electron donor. In the first possible pathway, TEOA- anion binds to the metal center of the catalytically active intermediate, [(en)M(CO)3]˙+ followed by CO2 insertion into the M-OCH2CH2NR2 bond. The latter upon successive protonations releases a metal 'free' [R2NCH2CH2OC(O)(OH)] intermediate which starts a new and final catalytic cycle, leading to the formation of CO and H2O while regenarating TEOA. In the second possible pathway, the 17e-, catalytically active intermediate, [(en)M(CO)3]˙+ captures CO2 molecule, forming an η1-CO2 complex. Upon 2H+/2e- successive protonations and reductions, CO product is obtained along with regenarating the catalytically active intermediate [(en)M(CO)3]˙+. The nature of the proton donor affects the reaction profiles of both mechanisms. The nature of the solvent does not affect significantly the reaction mechanisms under study. Finally, since photoexcitation and T1 reductive quenching are common to both pathways, we have srutinized the photophysical properties of the [(en)M(CO)3Cl] complexes along with their T1 excited states reduction potentials, . The [(en)M(CO)3Cl] complexes absorb mainly in the UV region while the absolute are in the range 6.4-0.9 eV.

Electrocatalytic Reduction of CO2 to CO by Molecular Cobalt-Polypyridine Diamine Complexes

Cobalt complexes have previously been reported to exhibit high faradaic efficiency in reducing CO2 to CO. Herein, we synthesized capsule-like cobalt-polypyridine diamine complexes [Co(L1)](BF4)2 (1) and [Co(L2) (CH3CN)](BF4)2 (2) as catalysts for the electrocatalytic reduction of CO2. Under catalytic conditions, complexes 1 and 2 demonstrated the electrocatalytic reduction of CO2 to CO in the presence or absence of CH3OH as a proton source. Experimental and computational studies revealed that complexes 1 and 2 undergo two consecutive reversible one-electron reductions on the cobalt core, followed by the addition of CO2 to form a metallocarboxylate intermediate [CoII(L)-CO22-]0. This crucial reaction intermediate, which governs the catalytic cycle, was successfully detected using high resolution mass spectrometry (HRMS). In situ Fourier-transform infrared spectrometer (FTIR) analysis showed that methanol can enhance the rate of carbon-oxygen bond cleavage of the metallocarboxylate intermediate. DFT studies on [CoII(L)-CO22-]0 have suggested that the doubly reduced species attacks CO2 on the C atom through the dz2 orbital, while the interaction with CO2 is further stabilized by the π interaction between the metal dxz or dxz orbital with p orbitals on the O atoms. Further reductions generate a metal carbonyl intermediate [CoI(L)-CO]+, which ultimately releases CO.

Formoxyboranes as hydroborane surrogates for the catalytic reduction of carbonyls through transfer hydroboration

A new class of Lewis base stabilized formoxyboranes demonstrates the feasibility of catalytic transfer hydroboration. In the presence of a ruthenium catalyst, they have shown broad applicability for reducing carbonyl compounds. Various borylated alcohols are obtained in high selectivity and yields up to 99%, tolerating several functional groups. Computational studies enabled to propose a mechanism for this transformation, revealing the role of the ruthenium catalyst and the absence of hydroborane intermediates.

Computational Design of an Electro-Organocatalyst for Conversion of CO2 into Formaldehyde

Density functional theory calculations employing a hybrid implicit/explicit solvation method were used to explore a new strategy for electrochemical conversion of CO2 using an electro-organocatalyst. A particular structural motif is identified that consists of an electron-rich vicinal enediamine (>N-C═C-N<) backbone, which is capable of activating CO2 by the formation of a C-C bond while subsequently facilitating the transfer of electrons from a chemically inert cathode to ultimately produce formaldehyde. Unlike transition metal-based electrocatalysts, the electro-organocatalyst is not constrained by scaling relations between the formation energies of activated CO2 and adsorbed CO, nor is it expected to be active for the competing hydrogen evolution reaction. The rate-limiting steps are found to occur during two proton-coupled electron transfer (PCET) sequences and are associated with the transfer of a proton from a proton transfer mediator to a carbon atom on the electro-organocatalyst. The difficulty of this step in the second PCET sequence necessitates an electrode potential of -0.85 V vs RHE to achieve the maximum turnover frequency. In addition, it is postulated that the electro-organocatalyst should also be capable of forming long-chain aldehydes by successively carrying out reductive aldol condensation to grow the alkyl chain one carbon at a time.

How to rationally design homogeneous catalysts for efficient CO2 electroreduction?

Electrified converting CO2 into valuable fuels and chemicals using a homogeneous electrochemical CO2 reduction (CO2ER) approach simplifies the operation, providing a potential option for decoupling energy harvesting and renewable chemical production. These merits benefit the scenarios where decentralization and intermittent power are key factors. This perspective aims to provide an overview of recent progress in homogeneous CO2ER. We introduce firstly the fundamentals chemistry of the homogeneous CO2ER, followed by a summary of the crucial factors and the important criteria broadly employed for evaluating the performance. We then highlight the recent advances in the most widely explored transition-metal coordinate complexes for the C1 and multicarbon (C2+) products from homogeneous CO2ER. Finally, we summarize the remaining challenges and opportunities for developing homogeneous electrocatalysts for efficient CO2ER. This perspective is expected to favor the rational design of efficient homogeneous electrocatalysts for selective CO2ER toward renewable fuels and feedstocks.

Electrocatalytic Interconversions of CO2 and Formate on a Versatile Iron-Thiolate Platform

Exploring bidirectional CO2/HCO2- catalysis holds significant potential in constructing integrated (photo)electrochemical formate fuel cells for energy storage and applications. Herein, we report selective CO2/HCO2- electrochemical interconversion by exploiting the flexible coordination modes and rich redox properties of a versatile iron-thiolate platform, Cp*Fe(II)L (L = 1,2-Ph2PC6H4S-). Upon oxidation, this iron complex undergoes formate binding to generate a diferric formate complex, [(L-)2Fe(III)(μ-HCO2)Fe(III)]+, which exhibits remarkable electrocatalytic performance for the HCO2--to-CO2 transformation with a maximum turnover frequency (TOFmax) ∼103 s-1 and a Faraday efficiency (FE) ∼92(±4)%. Conversely, this iron system also allows for reduction at -1.85 V (vs Fc+/0) and exhibits an impressive FE ∼93 (±3)% for the CO2-to-HCO2- conversion. Mechanism studies revealed that the HCO2--to-CO2 electrocatalysis passes through dicationic [(L2)-•Fe(III)(μ-HCO2)Fe(III)]2+ generated by unconventional oxidation of the diferric formate species taking place at ligand L, while the CO2-to-HCO2- reduction involves a critical intermediate of [Fe(II)-H]- that was independently synthesized and structurally characterized.

Proton transfer kinetics of transition metal hydride complexes and implications for fuel-forming reactions

Proton transfer reactions involving transition metal hydride complexes are prevalent in a number of catalytic fuel-forming reactions, where the proton transfer kinetics to or from the metal center can have significant impacts on the efficiency, selectivity, and stability associated with the catalytic cycle. This review correlates the often slow proton transfer rate constants of transition metal hydride complexes to their electronic and structural descriptors and provides perspective on how to exploit these parameters to control proton transfer kinetics to and from the metal center. A toolbox of techniques for experimental determination of proton transfer rate constants is discussed, and case studies where proton transfer rate constant determination informs fuel-forming reactions are highlighted. Opportunities for extending proton transfer kinetic measurements to additional systems are presented, and the importance of synergizing the thermodynamics and kinetics of proton transfer involving transition metal hydride complexes is emphasized.

Machine Learning-Enabled Predictions of Condensed Fukui Functions and Designing of Metal Pincer Complexes for Catalytic Hydrogenation of CO2

This research showcases the machine learning (ML)-enabled homogeneous catalyst discovery to be employed in carbon dioxide hydrogenation. To achieve the desired turnover frequency (TOF), the electrophilicity of the central metal atom is a crucial factor in transition metal pincer complexes. The condensed Fukui function is a direct measure of the catalytic performance of these pincer complexes. Herein, we demonstrate that machine learning is a convenient and effiecient method to calculate condensed Fukui functions of the central metal atom. The electrophilicity values of 202 pincer complexes were calculated by using density functional theory (DFT) to train the ML model. The test data of the experimentally established pincer complexes show a direct linkage between calculated electrophilicity and experimental TOF. Further, this data was used to develop an ML protocol to screen 2,84,062 catalyst complexes to get the electrophilicity values of the Mn, Fe, Co, and Ni transition metals encompassing various permutation combinations of PNP, PNN, NNN, and PCP pincer ligands. These findings validate the efficacy of machine learning in the rapid screening of metal pincer catalysts based on condensed Fukui functions.

A Molecular Z-Scheme Artificial Photosynthetic System Under the Bias-Free Condition for CO2 Reduction Coupled with Two-electron Water Oxidation: Photocatalytic Production of CO/HCOOH and H2 O2

Bio-inspired molecular-engineered systems have been extensively investigated for the half-reactions of H2 O oxidation or CO2 reduction with sacrificial electron donors/acceptors. However, there has yet to be reported a device for dye-sensitized molecular photoanodes coupled with molecular photocathodes in an aqueous solution without the use of sacrificial reagents. Herein, we will report the integration of SnIV - or AlIII -tetrapyridylporphyrin (SnTPyP or AlTPyP) decorated tin oxide particles (SnTPyP/SnO2 or AlTPyP/SnO2 ) photoanode with the dye-sensitized molecular photocathode on nickel oxide particles containing [Ru(diimine)3 ]2+ as the light-harvesting unit and [Ru(diimine)(CO)2 Cl2 ] as the catalyst unit covalently connected and fixed within poly-pyrrole layer (RuCAT-RuC2 -PolyPyr-PRu/NiO). The simultaneous irradiation of the two photoelectrodes with visible light resulted in H2 O2 on the anode and CO, HCOOH, and H2 on the cathode with high Faradaic efficiencies in purely aqueous conditions without any applied bias is the first example of artificial photosynthesis with only two-electron redox reactions.

Selective electrochemical CO2 conversion with a hybrid polyoxometalate

A multi-component coordination compound, in which ruthenium antenna complexes are connected to a polyoxotungstate core is presented. This hybrid cluster effectively promotes the electrochemical conversion of CO2 to C1 feedstocks, the selectivity of which can be controlled by the acidity of the media.

Photoinduced Catalytic Organic-Hydride Transfer to CO2 Mediated with Ruthenium Complexes as NAD+ /NADH Redox Couple Models

The catalytic organic-hydride transfer to CO₂ was first achieved through the photoinduced two-electron reduction of the [Ru(bpy)₂ (pbn)]²⁺ /[Ru(bpy)₂ (pbnHH)]²⁺ (bpy=2,2'-bipyridine, pbn=2-(pyridin-2-yl)benzo[b]-1,5-naphthyridine, and pbnHH=2-(pyridin-2-yl)-5,10-dihydrobenzo[b]-1,5-naphthyridine) redox couple in the presence of 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH). The active species for the catalytic hydride transfer to carbon dioxide giving formate is [Ru(bpy)(bpy⋅^- )(pbnHH)]⁺ formed by one-electron reduction of [Ru(bpy)₂ (pbnHH)]²⁺ with BI⋅.

Strategies to Enhance CO2 Electrochemical Reduction from Reactive Carbon Solutions

CO₂ electrochemical reduction (CO₂ ER) from (bi)carbonate feed presents an opportunity to efficiently couple this process to alkaline-based carbon capture systems. Likewise, while this method of reducing CO₂ currently lags behind CO₂ gas-fed electrolysers in certain performance metrics, it offers a significant improvement in CO₂ utilization which makes the method worth exploring. This paper presents two simple modifications to a bicarbonate-fed CO₂ ER system that enhance the selectivity towards CO. Specifically, a modified hydrophilic cathode with Ag catalyst loaded through electrodeposition and the addition of dodecyltrimethylammonium bromide (DTAB), a low-cost surfactant, to the catholyte enabled the system to achieve a FE_CO of 85% and 73% at 100 and 200 mA·cm^-2, respectively. The modifications were tested in 4 h long experiments where DTAB helped maintain FE_CO stable even when the pH of the catholyte became more alkaline, and it improved the CO² utilization compared to a system without DTAB.

Pre-Equilibrium Reaction Mechanism as a Strategy to Enhance Rate and Lower Overpotential in Electrocatalysis

Pre-equilibrium reaction kinetics enable the overall rate of a catalytic reaction to be orders of magnitude faster than the rate-determining step. Herein, we demonstrate how pre-equilibrium kinetics can be applied to breaking the linear free-energy relationship (LFER) for electrocatalysis, leading to rate enhancement 5 orders of magnitude and lowering of overpotential to approximately thermoneutral. This approach is applied to pre-equilibrium formation of a metal-hydride intermediate to achieve fast formate formation rates from CO2 reduction without loss of selectivity (i.e., H2 evolution). Fast pre-equilibrium metal-hydride formation, at 108 M-1 s-1, boosts the CO2 electroreduction to formate rate up to 296 s-1. Compared with molecular catalysts that have similar overpotential, this rate is enhanced by 5 orders of magnitude. As an alternative comparison, overpotential is lowered by ∼50 mV compared to catalysts with a similar rate. The principles elucidated here to obtain pre-equilibrium reaction kinetics via catalyst design are general. Design and development that builds on these principles should be possible in both molecular homogeneous and heterogeneous electrocatalysis.

Mechanism and Selectivity of Electrochemical Reduction of CO2 on Metalloporphyrin Catalysts from DFT Studies

Electrochemical reduction of CO₂ to value-added chemicals has been hindered by poor product selectivity and competition from hydrogen evolution reactions. This study aims to unravel the origin of the product selectivity and competitive hydrogen evolution reaction on [MP]⁰ catalysts (M = Fe, Co, Rh and Ir; P is porphyrin ligand) by analyzing the mechanism of CO₂ reduction and H₂ formation based on the results of density functional theory calculations. Reduction of CO₂ to CO and HCOO^- proceeds via the formation of carboxylate adduct ([MP-COOH]⁰ and ([MP-COOH]^-) and metal-hydride [MP-H]^-, respectively. Competing proton reduction to gaseous hydrogen shares the [MP-H]^- intermediate. Our results show that the pK_a of [MP-H]⁰ can be used as an indicator of the CO or HCOO^-/H₂ preference. Furthermore, an ergoneutral pH has been determined and used to determine the minimum pH at which selective CO₂ reduction to HCOO^- becomes favorable over the H₂ production. These analyses allow us to understand the product selectivity of CO₂ reduction on [FeP]⁰, [CoP]⁰, [RhP]⁰ and [IrP]⁰; [FeP]⁰ and [CoP]⁰ are selective for CO whereas [RhP]⁰ and [IrP]⁰ are selective for HCOO^- while suppressing H₂ formation. These descriptors should be applicable to other catalysts in an aqueous medium.

CO2 Electroreduction on Carbon-Based Electrodes Functionalized with Molecular Organometallic Complexes—A Mini Review

Heterogeneous electrochemical CO2 reduction has potential advantages with respect to the homogeneous counterpart due to the easier recovery of products and catalysts, the relatively small amounts of catalyst necessary for efficient electrolysis, the longer lifetime of the catalysts, and the elimination of solubility problems. Unfortunately, several disadvantages are also present, including the difficulty of designing the optimized and best-performing catalysts by the appropriate choice of the ligands as well as a larger heterogeneity in the nature of the catalytic site that introduces differences in the mechanistic pathway and in electrogenerated products. The advantages of homogeneous and heterogeneous systems can be preserved by anchoring intact organometallic molecules on the electrode surface with the aim of increasing the dispersion of active components at a molecular level and facilitating the electron transfer to the electrocatalyst. Electrode functionalization can be obtained by non-covalent or covalent interactions and by direct electropolymerization on the electrode surface. A critical overview covering the very recent literature on CO2 electroreduction by intact organometallic complexes attached to the electrode is summarized herein, and particular attention is given to their catalytic performances. We hope this mini review can provide new insights into the development of more efficient CO2 electrocatalysts for real-life applications.

Iridium(III) bis(thiophosphinite) pincer complexes: synthesis, ligand activation and applications in catalysis

Iridium(III) bis(thiophosphinite) complexes of the type [(^RPSCSP^R)Ir(H)(Cl)(py)] (^RPSCSP^R = κ³-(2,6-SPR₂)C₆H₃) (R = tBu, iPr, Ph) can be prepared from the ligand precursors 1,3-(SPR₂)C₆H₄ by C-H activation at Ir using [Ir(COE)₂Cl]₂ or [Ir(COD)Cl]₂. Optimisation of the protocol for complexation showed that direct cyclometallation in the absence or presence of pyridine, as well as C-H activation in the presence of H₂ are viable options that, depending on the phosphine substituent furnish the five-coordinate Ir(III) hydride chloride complexes 2-R or the base stabilised species 3-R in good yields. In case of the ^PhPSCSP^Ph ligand, P-S activation results in the formation of a thiophosphine stabilised Ir(III) hydride complex [(^PhPSCSP^Ph)Ir(H)(Cl)(PPh₂SH)] (4). Reaction of 2-tBu with H₂ in the presence of base furnishes an Ir(III) dihydride complex (5) via a labile Ir(III) dihydride-dihydrogen complex (6). All complexes are inactive for transfer dehydrogenation of cyclooctane in the presence of NaOtBu and tert-butylethylene, likely due to decomposition of the Ir complex in the presence of base at higher temperature.

Molecular Catalysts for the Reductive Homocoupling of CO2 towards C2+ Compounds

The conversion of CO2 into multicarbon (C2+ ) compounds by reductive homocoupling offers the possibility to transform renewable energy into chemical energy carriers and thereby create "carbon-neutral" fuels or other valuable products. Most available studies have employed heterogeneous metallic catalysts, but the use of molecular catalysts is still underexplored. However, several studies have already demonstrated the great potential of the molecular approach, namely, the possibility to gain a deep mechanistic understanding and a more precise control of the product selectivity. This Minireview summarizes recent progress in both the thermo- and electrochemical reductive homocoupling of CO2 toward C2+ products mediated by molecular catalysts. In addition, reductive CO homocoupling is discussed as a model for the further conversion of intermediates obtained from CO2 reduction, which may serve as a source of inspiration for developing novel molecular catalysts in the future.

Photoredox Chemistry with Organic Catalysts: Role of Computational Methods

Organic catalysts have the potential to carry out a wide range of otherwise thermally inaccessible reactions via photoredox routes. Early demonstrated successes of organic photoredox catalysts include one-electron CO₂ reduction and H₂ generation via water splitting. Photoredox systems are challenging to study and design owing to the sheer number and diversity of phenomena involved, including light absorption, emission, intersystem crossing, partial or complete charge transfer, and bond breaking or formation. Designing a viable photoredox route therefore requires consideration of a host of factors such as absorption wavelength, solvent, choice of electron donor or acceptor, and so on. Quantum chemistry methods can play a critical role in demystifying photoredox phenomena. Using one-electron CO₂ reduction with phenylene-based chromophores as an illustrative example, this perspective highlights recent developments in quantum chemistry that can advance our understanding of photoredox processes and proposes a way forward for driving the design and discovery of organic catalysts.

Designing Catalytic Systems Using Binary Solvent Mixtures: Impact of Mole Fraction of Water on Hydride Transfer

The free energy for hydride transfer reactions of transition metal hydrides is known to be influenced by solvent effects. The first-row transition metal hydride [HNi(dmpe)₂][BF₄] (dmpe = 1,2-bis(dimethylphosphino)ethane) has starkly different hydride transfer reactivities with CO₂ in different solvents. A binary mixture of water and acetonitrile was used to tune the hydride transfer reactivity of HNi(dmpe)₂⁺ with CO₂ so that the free energy for this reaction approached zero. Various mole fractions of water were tested and a linear relationship between the hydride transfer free energy and solvent composition was established for 0-0.24 mole fraction of water. A deviation from linearity was found upon moving toward higher mole fractions of water. The tuning of the free energy for hydride transfer allowed HNi(dmpe)₂⁺ to be used as a catalyst for the hydrogenation of CO₂. The optimized catalyst conditions produced 58 turnovers at room temperature in 0.082 mole fraction of water using 60 atm of a 1:1 mixture of H₂ to CO₂ gas.

Lewis-Basic EDTA as a Highly Active Molecular Electrocatalyst for CO2 Reduction to CH4

The most active catalysts so far successful in hydrogenation reduction of CO₂ are mainly heterogeneous Cu-based catalysts. The complex coordination environments and multiple active sites in heterogeneous catalysts result in low selectivity of target product, while molecular catalysts with well-defined active sites and tailorable structures allow mechanism-based performance optimization. Herein, we firstly report a single ethylenediaminetetraacetic acid (EDTA) molecular-level immobilized on the surface of carbon nanotube as a catalyst for transferring CO₂ to CH₄ with an excellent performance. This catalyst exhibits a high Faradaic efficiency of 61.6 % toward CH₄ , a partial current density of -16.5 mA cm^-2 at a potential of -1.3 V versus reversible hydrogen electrode. Density functional theory calculations reveal that the Lewis basic COO^- groups in EDTA molecule are the active sites for CO₂ reduction reaction (CO₂ RR). The energy barrier for the generation of CO from *CO intermediate is as high as 0.52 eV, while the further protonation of *CO to *CHO follows an energetic downhill path (-1.57 eV), resulting in the high selectivity of CH₄ . This work makes it possible to control the product selectivity for CO₂ RR according to the relationship between the energy barrier of *CO intermediate and molecular structures in the future.

Photoenzymatic Catalytic Cascade System of a Pyromellitic Diimide/g-C3N4 Heterojunction to Efficiently Regenerate NADH for Highly Selective CO2 Reduction toward Formic Acid

Photocatalytic reduction of carbon dioxide (CO₂) holds great promise for both clean energy and environment protection. However, the low activity and poor selectivity of photocatalysts are the main bottlenecks. Herein, inspired by artificial photosynthesis and taking advantages of high efficiency and specificity of bioenzymes, we marry photo with enzyme to synergistically solve the above problems. A metal-free heterojunction of pyromellitic diimide/g-C₃N₄ (PDI/CN) with an excellent visible light response (λ < 660 nm) is fabricated for achieving a photoenzymatic catalytic cascade system, which efficiently regenerates nicotinamide adenine dinucleotide (NADH) and selectively reduces CO₂ to formic acid (HCOOH). The highest NADH yield of the PDI/CN hybrid achieved is 75%, and the HCOOH generation rate achieved is 1.269 mmol g^-1 h^-1 with nearly 100% selectivity, which is much higher than those of the reported materials. The excellent photocatalytic performance is attributed to the unique photoenzymatic catalytic cascade system, heterointerface effect, good conductivity, and a wide sunlight response range of the PDI/CN heterojunction. This work provides an efficient strategy and a corresponding photocatalyst for the directional conversion of CO₂ to HCOOH.

A New Hexagonal Cobalt Nanosheet Catalyst for Selective CO2 Conversion to Ethanal

We report a new form of catalyst based on ferromagnetic hexagonal-close-packed (hcp) Co nanosheets (NSs) for selective CO₂RR to ethanal, CH₃CHO. In all reduction potentials tested from -0.2 to -1.0 V (vs RHE) in 0.5 M KHCO₃ solution, the reduction yields ethanal as a major product and ethanol/methanol as minor products. At -0.4 V, the Faradaic efficiency (FE) for ethanal reaches 60% with current densities of 5.1 mA cm^-2 and mass activity of 3.4 A g^-1 (total FE for ethanal/ethanol/methanol is 82%). Density functional theory (DFT) calculations suggest that this high CO₂RR selectivity to ethanal on the hcp Co surface is attributed to the unique intralayer electron transfer, which not only promotes [OC-CO]* coupling but also suppresses the complete hydrogenation of the coupling intermediates to ethylene, leading to highly selective formation of CH₃CHO.

Activating the Fe(I) State of Iron Porphyrinoid with Second-Sphere Proton Transfer Residues for Selective Reduction of CO2 to HCOOH via Fe(III/II)-COOH Intermediate(s)

The ability to tune the selectivity of CO₂ reduction by first-row transition metal-based complexes via the inclusion of second-sphere effects heralds exciting and sought-after possibilities. On the basis of the mechanistic understanding of CO₂ reduction by iron porphyrins developed by trapping and characterizing the intermediates involved ( J. Am. Chem. Soc. 2015, 137, 11214), a porphyrinoid ligand is envisaged to switch the selectivity of the iron porphyrins by reducing CO₂ from CO to HCOOH as well as lower the overpotential to the process. The results show that the iron porphyrinoid designed can catalyze the reduction of CO₂ to HCOOH using water as the proton source with 97% yield with no detectable H₂ or CO. The iron porphyrinoid can activate CO₂ in its Fe(I) state resulting in very low overpotential for CO₂ reduction in contrast to all reported iron porphyrins, which can reduce CO₂ in their Fe(0) state. Intermediates involved in CO₂ reduction, Fe(III)-COOH and a Fe(II)-COOH, are identified with in situ FTIR-SEC and subsequently chemically generated and characterized using FTIR, resonance Raman, and Mössbauer spectroscopy. The mechanism of the reaction helps elucidate a key role played by a closely placed proton transfer residue in aiding CO₂ binding to Fe(I), stabilizing the intermediates, and determining the fate of a rate-determining Fe(II)-COOH intermediate.

Electrochemical reduction of CO2 to CO and HCOO- using metal-cyclam complex catalysts: predicting selectivity and limiting potential from DFT

Sustainable fuel production from CO₂ through electrocatalytic reduction is promising but challenging due to high overpotential and poor product selectivity. Herein, we computed the reaction free energies of electrocatalytic reduction of CO₂ to CO and HCOO^- using the density functional theory method and screened transition metal(M)-cyclam(L) complexes as molecular catalysts for CO₂ reduction. Our results showed that pK_a of the proton adduct formed by the protonation of the reduced metal center can be used as a descriptor to select the operating pH of the solution to steer the reaction toward either the CO or hydride cycle. Among the complexes, [LNi]²⁺ and [LPd]²⁺ catalyze the reactions by following the CO cycle and are the CO selective catalysts in the pH ranges 1.81-7.31 and 6.10 and higher, respectively. Among the complexes that catalyze the reactions by following the hydride cycle, [LMo]²⁺ and [LW]³⁺ are HCOO^- selective catalysts and have low limiting potentials of -1.33 V and -1.54 V, respectively. Other complexes, including [LRh]²⁺, [LIr]²⁺, [LW]²⁺, [LCo]²⁺, and [LTc]²⁺ catalyze the reactions resulting in either HCOO^- from CO₂ reduction or H₂ from proton reduction; however, HCOO^- formation is always thermodynamically more favorable. Notably, [LMo]²⁺, [LW]³⁺, [LW]²⁺ and [LCo]²⁺ have limiting potentials less negative than -1.6 V and are based on Earth-abundant elements, making them attractive for practical application.

Efficient three-phase electrocatalytic CO2 reduction to formate on superhydrophobic Bi-C interfaces

Bi-C catalysts with the three-phase interfaces of CO2 (gas), electrolyte (liquid) and catalyst (solid) exhibit a remarkable electrocatalytic CO2 reduction (ECR) to formate selectivity (above 95% faradaic efficiency) with a high current (100 mA cm-2) in a broad potential range.

Redox behavior of iridium octaethylporphycene and electrocatalytic hydrogen evolution

The electrochemical properties of [Formula: see text]-octaethylporphycene iridium complex (Ir-OEPo) were determined. Based on the electro-spectro measurement results, the reduction of Ir-OEPo did not occur at the central metal but at the ligand, while the reduction of [Formula: see text]-octaethylporphyrin iridium complex (Ir-OEPor) occurred at the central iridium. A catalytic current was observed during the cyclic voltammetry (CV) measurements with trifluoroacetic acid (TFA) under a reductive condition, indicating the catalytic reactivity of Ir-OEPo for the hydrogen evolution reaction (HER). By constant potential electrolysis, hydrogen gas was detected by gas chromatography (GC) and the catalytic reactivity of Ir-OEPo was confirmed. The HER mechanism via ligand reduction of macrocyclic aromatic complexes could be one of the concepts for the development of new catalysts.

Access to Metal Centers and Fluxional Hydride Coordination Integral for CO2 Insertion into [Fe3(μ-H)3]3+ Clusters

CO₂ insertion into tri(μ-hydrido)triiron(II) clusters ligated by a tris(β-diketiminate) cyclophane is demonstrated to be balanced by sterics for CO₂ approach and hydride accessibility. Time-resolved NMR and UV-vis spectra for this reaction for a complex in which methoxy groups border the pocket of the hydride donor (Fe₃H₃L², 4) result in a decreased activation barrier and increased kinetic isotope effect consistent with the reduced sterics. For the ethyl congener Fe₃H₃L¹ (2), no correlation is found between rate and reaction solvent or added Lewis acids, implying CO₂ coordination to an Fe center in the mechanism. The estimated hydricity (50 kcal/mol) based on observed H/D exchange with BD₃ requires Fe-O bond formation in the product to offset an endergonic CO₂ insertion. μ₃-hydride coordination is noted to lower the activation barrier for the first CO₂ insertion event in DFT calculations.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Design of robust 2,2'-bipyridine ligand linkers for the stable immobilization of molecular catalysts on silicon(111) surfaces

The attachment of the 2,2'-bipyridine (bpy) moieties to the surface of planar silicon(111) (photo)electrodes was investigated using ab initio simulations performed on a new cluster model for methyl-terminated silicon. Density functional theory (B3LYP) with implicit solvation techniques indicated that adventitious chlorine atoms, when present in the organic linker backbone, led to instability at very negative potentials of the surface-modified electrode. In prior experimental work, chlorine atoms were present as a trace surface impurity due to required surface processing chemistry, and thus could plausibly result in the observed surface instability of the linker. Free energy calculations for the Cl-atom release process with model silyl-linker constructs revealed a modest barrier (14.9 kcal mol-1) that decreased as the electrode potential became more negative. A small library of new bpy-derived structures has additionally been explored computationally to identify strategies that could minimize chlorine-induced linker instability. Structures with fluorine substituents are predicted to be more stable than their chlorine analogues, whereas fully non-halogenated structures are predicted to exhibit the highest stability. The behavior of a hydrogen-evolving molecular catalyst Cp*Rh(bpy) (Cp* = pentamethylcyclopentadienyl) immobilized on a silicon(111) cluster was explored theoretically to evaluate differences between the homogeneous and surface-attached behavior of this species in a tautomerization reaction observed under reductive conditions for catalytic H2 evolution. The calculated free energy difference between the tautomers is small, hence the results suggest that use of reductively stable linkers can enable robust attachment of catalysts while maintaining chemical behavior on the electrode similar to that exhibited in homogeneous solution.

Recent advances in visible-light-driven carbon dioxide reduction by metal-organic frameworks

Metal-organic frameworks (MOFs) have emerged as promising materials and have attracted researchers due to their unique chemical and physical properties-design flexibility, tuneable pore channels, a high surface-to-volume ratio that allow their distinct application in diverse research fields-gas storage, gas separation, catalysis, adsorption, drug delivery, ion exchange, sensing, etc. The rapidly growing CO₂ in the atmosphere is a global concern due to the excessive use of fossil fuels in the current era. CO₂ is the prime cause of global warming and should be ameliorated either through adsorption or conversion into value-added products to protect the environment and mankind. Nowadays, MOFs are exploited as a photocatalyst for applications of CO₂ reduction. Since the use of semiconductors limits the use of visible light for photocatalytic reduction of CO₂, MOFs are promising options. The current review describes recent development in the application of MOFs as host, composites, and their derivatives in photocatalytic reduction of CO₂ to CO and different organic chemicals (HCOOH, CH₃OH, CH₄). Efficient charge separation and visible light absorption by incorporation of active sites for efficient photocatalysis have been discussed. The selection of material for high CO₂ uptake and potential strategies for the rational design and development of high-performance catalysts are outlined. Major challenges and future perspectives have also been discussed at the last of the review.

Kinetics of Hydride Transfer from Catalytic Metal-Free Hydride Donors to CO2

Selective reduction of CO₂ to formate represents an ongoing challenge in photoelectrocatalysis. To provide mechanistic insights, we investigate the kinetics of hydride transfer (HT) from a series of metal-free hydride donors to CO₂. The observed dependence of experimental and calculated HT barriers on the thermodynamic driving force was modeled by using the Marcus hydride transfer formalism to obtain the insights into the effect of reorganization energies on the reaction kinetics. Our results indicate that even if the most ideal hydride donor were discovered, the HT to CO₂ would exhibit sluggish kinetics (<100 turnovers per second at -0.1 eV driving force), indicating that the conventional HT may not be an appropriate mechanism for solar conversion of CO₂ to formate. We propose that the conventional HT mechanism should not be considered for CO₂ reduction catalysis and argue that the orthogonal HT mechanism, previously proposed to address thermodynamic limitations of this reaction, may also lead to lower kinetic barriers for CO₂ reduction to formate.

Effects of Appended Poly(ethylene glycol) on Electrochemical CO2 Reduction by an Iron Porphyrin Complex

Electrochemical carbon dioxide (CO₂) reduction is a sustainable approach for transforming atmospheric CO₂ into chemical feedstocks and fuels. To overcome the kinetic barriers of electrocatalytic CO₂ reduction, catalysts with high selectivity, activity, and stability are needed. Here, we report an iron porphyrin complex, FePEGP, with a poly(ethylene glycol) unit in the second coordination sphere, as a highly selective and active electrocatalyst for the electrochemical reduction of CO₂ to carbon monoxide (CO). Controlled-potential electrolysis using FePEGP showed a Faradaic efficiency of 98% and a current density of -7.8 mA/cm² at -2.2 V versus Fc/Fc⁺ in acetonitrile using water as the proton source. The maximum turnover frequency was calculated to be 1.4 × 10⁵ s^-1 using foot-of-the-wave analysis. Distinct from most other catalysts, the kinetic isotope effect (KIE) study revealed that the protonation step of the Fe-CO₂ adduct is not involved in the rate-limiting step. This model shows that the PEG unit as the secondary coordination sphere enhances the catalytic kinetics and thus is an effective design for electrocatalytic CO₂ reduction.

Dirhodium complexes as electrocatalysts for CO2 reduction to HCOOH: role of steric hindrance on selectivity

A series of Rh₂(ii,ii) complexes were shown to electrocatalytically reduce CO₂ to HCOOH. Electrochemical and spectroelectrochemical studies reveal a correlation between catalytic selectivity and efficiency with the steric bulk at the axial sites afforded by the bridging ligands. Mechanistic studies point to the presence of a Rh₂(ii,i)-H hydride as a key intermediate in the catalytic cycle.

More Than Just a Reagent: The Rise of Renewable Organohydrides for Catalytic Reduction of Carbon Dioxide

Stoichiometric carbon dioxide reduction to highly reduced C1 molecules, such as formic acid (2e^- ), formaldehyde (4e^- ), methanol (6e^- ) or even most-reduced methane (8e^- ), has been successfully achieved by using organosilanes, organoboranes, and frustrated Lewis Pairs (FLPs) in the presence of suitable catalyst. The development of renewable organohydride compounds could be the best alternative in this regard as they have shown promise for the transfer of hydride directly to CO₂ . Reduction of CO₂ by two electrons and two protons to afford formic acid by using renewable organohydride molecules has recently been investigated by various groups. However, catalytic CO₂ reduction to ≥2e^- -reduced products by using renewable organohydride-based molecules has rarely been explored. This Minireview summarizes important findings in this regard, encompassing both stoichiometric and catalytic CO₂ reduction.

Dual roles of the electronic effect on selectivity: pincer nickel-electrocatalyzed CO2 reduction

The unconventional dual roles of the electronic effect on the selectivity are unfolded, i.e., (1) the electronic effect on redox originating from σ-donation and (2) the electronic effect on π-back-donation.

Biochemical and artificial pathways for the reduction of carbon dioxide, nitrite and the competing proton reduction: effect of 2nd sphere interactions in catalysis

Reduction of oxides and oxoanions of carbon and nitrogen are of great contemporary importance as they are crucial for a sustainable environment.