Direct observation of phenylalanine orientations in statherin bound to hydroxyapatite surfaces

Organic Nucleation: Water Rearrangement Reveals the Pathway of Ibuprofen

The organic nucleation of the pharmaceutical ibuprofen is investigated, as triggered by the protonation of ibuprofen sodium salt at elevated pH. The growth and aggregation of nanoscale solution species by Analytical Ultracentrifugation and Molecular Dynamics (MD) simulations is tracked. Both approaches reveal solvated molecules, oligomers, and prenucleation clusters, their size as well as their hydration at different reaction stages. By combining surface-specific vibrational spectroscopy and MD simulations, water interacting with ibuprofen at the air-water interface during nucleation is probed. The results show the structure of water changes upon ibuprofen protonation in response to the charge neutralization. Remarkably, the water structure continues to evolve despite the saturation of protonated ibuprofen at the hydrophobic interface. This further water rearrangement is associated with the formation of larger aggregates of ibuprofen molecules at a late prenucleation stage. The nucleation of ibuprofen involves ibuprofen protonation and their hydrophobic assembly. The results highlight that these processes are accompanied by substantial water reorganization. The critical role of water is possibly relevant for organic nucleation in aqueous environments in general.

Role of Water during the Early Stages of Iron Oxyhydroxide Formation by a Bacterial Iron Nucleator

Understanding the nucleation of iron oxides and the underlying hydrolysis of aqueous iron species is still challenging, and molecular-level insights into the orchestrated response of water, especially at the hydrolysis interface, are lacking. We follow iron(III) hydrolysis in the presence of a synthetic bacterial iron nucleator, which is a magnetosome membrane specific peptide, by using a constant pH titration technique. Three distinct hydrolysis regimes were identified. Interface-selective sum frequency generation (SFG) spectroscopy was used to probe the interfacial reaction and water in direct contact with the peptide. SFG data reveal that iron(III) species react quickly with interfacial peptides while continuously enhancing water alignment into the later stages of hydrolysis. The gradually aligning water molecules are associated with initially promoted (regimes I and II) and later suppressed (regime III) hydrolysis after the saturation of water alignment has occurred until regime II. These interfacial insights are crucial for understanding the early stage of iron oxide biomineralization.

Acidic pH Promotes Refolding and Macroscopic Assembly of Amyloid β (16-22) Peptides at the Air-Water Interface

Assembly by amyloid-beta (Aβ) peptides is vital for various neurodegenerative diseases. The process can be accelerated by hydrophobic interfaces such as the cell membrane interface and the air-water interface. Elucidating the assembly mechanism for Aβ peptides at hydrophobic interface requires knowledge of the microscopic structure of interfacial peptides. Here we combine scanning force microscopy, sum-frequency generation spectroscopy, and metadynamics simulations to probe the structure of the central fragment of Aβ peptides at the air-water interface. We find that the structure of interfacial peptides depends on pH: at neutral pH, the peptides adopt a less folded, bending motif by forming intra-hydrogen bonds; at acidic pH, the peptides refold into extended β-strand fibril conformation, which further promotes their macroscopic assembly. The conformational transition of interfacial peptides is driven by the reduced hydrogen bonds, both with water and within peptides, resulting from the protonation of acidic glutamic acid side chains.

Structure of Keratins in Adhesive Gecko Setae Determined by Near-Edge X-ray Absorption Fine Structure Spectromicroscopy

Geckos have the astonishing ability to climb on vertical surfaces due to the adhesive properties of fibrous setae at the tips of their toe pads. While the adhesion mechanism principle, based on van der Waals interactions of myriads of spatula located at the outermost end of the setal arrays, has been studied extensively, there are still open questions about the chemistry of gecko setae. The gecko adhesive system is based on keratin fibrils assembled to support the entire setal structure. At the same time, the structure and alignment of keratin molecules within the ultrafine spatula tissue, which can support the enormous mechanical strain, still remain unknown. We have studied the molecular structure of gecko spatula using near-edge X-ray absorption fine structure (NEXAFS) imaging. We indeed found that the setae consist of a β-sheet structure aligned with the adhesion direction of the setae. Such alignment may provide mechanical stability to the setae and resistance to wear across different length scales.

Developments and Ongoing Challenges for Analysis of Surface-Bound Proteins

Proteins at surfaces and interfaces play important roles in the function and performance of materials in applications ranging from diagnostic assays to biomedical devices. To improve the performance of these materials, detailed molecular structure (conformation and orientation) along with the identity and concentrations of the surface-bound proteins on those materials must be determined. This article describes radiolabeling, surface plasmon resonance, quartz crystal microbalance with dissipation, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, sum frequency generation spectroscopy, and computational techniques along with the information each technique provides for characterizing protein films. A multitechnique approach using both experimental and computation methods is required for these investigations. Although it is now possible to gain much insight into the structure of surface-bound proteins, it is still not possible to obtain the same level of structural detail about proteins on surfaces as can be obtained about proteins in crystals and solutions, especially for large, complex proteins. However, recent results have shown it is possible to obtain detailed structural information (e.g., backbone and side chain orientation) about small peptides (5-20 amino sequences) on surfaces. Current studies are extending these investigations to small proteins such as protein G B1 (∼6 kDa). Approaches for furthering the capabilities for characterizing the molecular structure of surface-bound proteins are proposed.

Functional biomedical materials derived from proteins in the acquired salivary pellicle

In the oral environment, the acquired salivary pellicle (ASP) on the tooth surface comprises proteins, glycoproteins, carbohydrates, and lipids. The ASP can specifically and rapidly adsorb on the enamel surface to provide effective lubrication, protection, hydration, and remineralisation, as well as be recognised by various bacteria to form a microbial biofilm (plaque). The involved proteins, particularly various phosphoproteins such as statherins, histatins, and proline-rich proteins, are vital to their specific functions. This review first describes the relationship between the biological functions of these proteins and their structures. Subsequently, recent advances in functional biomedical materials derived from these proteins are reviewed in terms of dental/bone therapeutic materials, antibacterial materials, tissue engineering materials, and coatings for medical devices. Finally, perspectives and challenges regarding the rational design and biomedical applications of ASP-derived materials are discussed.

Role of Surface Chemistry in the Superhydrophobicity of the Springtail Orchesella cincta (Insecta:Collembola)

Collembola are ancient arthropods living in soil with extensive exposure to dirt, bacteria, and fungi. To protect from the harsh environmental conditions and to retain a layer of air for breathing when submerged in water, they have evolved a superhydrophobic, liquid-repelling cuticle surface. The nonfouling and self-cleaning properties of springtail cuticle make it an interesting target of biomimetic materials design. Recent research has mainly focused on the intricate microstructures at the cuticle surface. Here we study the role of the cuticle chemistry for the Collembola species Orchesella cincta (Collembola, Entomobryidae). O. cincta uses a relatively simple cuticle structure with primary granules arranged to function as plastrons. In contrast to the Collembolan cuticle featuring structures on multiple length scales that is functional irrespective of surface chemistry, we found that the O. cincta cuticle loses its hydrophobic properties after being rinsed with dichloromethane. Sum frequency generation spectroscopy and time-of-flight secondary ion mass spectrometry in combination with high-resolution mass spectrometry show that a nanometer thin triacylglycerol-containing wax layer at the cuticle surface is essential for maintaining the antiwetting properties. Removal of the wax layer exposes chitin, terpenes, and lipid layers in the cuticle. With respect to biomimetic applications, the results show that, combined with a carefully chosen surface chemistry, superhydrophobicity may be achieved using a relatively unsophisticated surface structure rather than a complex, re-entrant surface structure alone.

Natural protein bioinspired materials for regeneration of hard tissues

This review describes the protein bioinspired materials for the repair of hard tissues such as enamel, dentin and bone.

NEXAFS imaging to characterize the physio-chemical composition of cuticle from African Flower Scarab Eudicella gralli

The outermost surface of insect cuticle is a high-performance interface that provides wear protection, hydration, camouflage and sensing. The complex and inhomogeneous structure of insect cuticle imposes stringent requirements on approaches to elucidate its molecular structure and surface chemistry. Therefore, a molecular understanding and possible mimicry of the surface of insect cuticle has been a challenge. Conventional optical and electron microscopies as well as biochemical techniques provide information about morphology and chemistry but lack surface specificity. We here show that a near edge X-ray absorption fine structure microscope at the National Synchrotron Light Source can probe the surface chemistry of the curved and inhomogeneous cuticle of the African flower scarab. The analysis shows the distribution of organic and inorganic surface species while also hinting at the presence of aragonite at the dorsal protrusion region of the Eudicella gralli head, in line with its biological function.

Biology serves as inspiration in materials development; this requires improved understanding of the surface chemistry responsible for processes which are being mimicked. Here, the authors report on the use of near edge X-ray absorption fine structure (NEXAFS) imaging to analyze the surface chemistry of insect cuticle.

Solid-State NMR and MD Study of the Structure of the Statherin Mutant SNa15 on Mineral Surfaces

Elucidation of the structure and interactions of proteins at native mineral interfaces is key to understanding how biological systems regulate the formation of hard tissue structures. In addition, understanding how these same proteins interact with non-native mineral surfaces has important implications for the design of medical and dental implants, chromatographic supports, diagnostic tools, and a host of other applications. Here, we combine solid-state NMR spectroscopy, isotherm measurements, and molecular dynamics simulations to study how SNa15, a peptide derived from the hydroxyapatite (HAP) recognition domain of the biomineralization protein statherin, interacts with HAP, silica (SiO₂), and titania (TiO₂) mineral surfaces. Adsorption isotherms are used to characterize the binding affinity of SNa15 to HAP, SiO₂, and TiO₂. We also apply 1D ¹³C CP MAS, 1D ¹⁵N CP MAS, and 2D ¹³C-¹³C DARR experiments to SNa15 samples with uniformly ¹³C- and ¹⁵N-enriched residues to determine backbone and side-chain chemical shifts. Different computational tools, namely TALOS-N and molecular dynamics simulations, are used to deduce secondary structure from backbone and side-chain chemical shift data. Our results show that SNa15 adopts an α-helical conformation when adsorbed to HAP and TiO₂, but the helix largely unravels upon adsorption to SiO₂. Interactions with HAP are mediated in general by acidic and some basic amino acids, although the specific amino acids involved in direct surface interaction vary with surface. The integrated experimental and computational approach used in this study is able to provide high-resolution insights into adsorption of proteins on interfaces.

Engineering Proteins at Interfaces: From Complementary Characterization to Material Surfaces with Designed Functions

Once materials come into contact with a biological fluid containing proteins, proteins are generally—whether desired or not—attracted by the material's surface and adsorb onto it. The aim of this Review is to give an overview of the most commonly used characterization methods employed to gain a better understanding of the adsorption processes on either planar or curved surfaces. We continue to illustrate the benefit of combining different methods to different surface geometries of the material. The thus obtained insight ideally paves the way for engineering functional materials that interact with proteins in a predetermined manner.

Simultaneous Observation of the Orientation and Activity of Surface-Immobilized Enzymes

Surface immobilized enzymes have been widely used in many applications such as biosensors, biochips, biofuel production, and biofuel cell construction. Many factors dictate how enzymes' structure, activity, and stability may change when immobilized, including surface functionalization, immobilization chemistry, nature of the solid support, and enzyme surface density. To better understand how immobilization affects enzyme structure and activity, we have developed a method to measure both surface-sensitive protein vibrational spectra and enzymatic activity simultaneously. To accomplish this, an optical/fluorescence microscope was incorporated into a sum frequency generation (SFG) spectrometer. Using β-glucosidase (β-Glu) as a model system, enzymes were covalently tethered to a self-assembled monolayer surface using cysteine-maleimide chemistry. Their orientations were determined by SFG spectroscopy, with a single native cysteine residue oriented toward the functionalized surface, and activity measured simultaneously using a fluorogenic substrate resorufin β-d-glucopyranoside, with a loss of activity of 53% as compared to comparable solution measurements. Measuring β-Glu activity and orientation simultaneously provides more accurate information for designing and further improving enzymatic activity of surface-bound enzymes.

The synthesis of super-small nano hydroxyapatite and its high adsorptions to mixed heavy metallic ions

A "molecular cage" was possibly built in glucose alkaline solution to limit the chemical reaction in a tiny space to control the size and morphology of HA nanoparticles. A possible reaction mechanism of HA nanoparticles confined space synthesis was proposed in this work. The super-small HA nanoparticles were successfully obtained in the first time in mild and green condition which had a 7 nm diameter. The adsorptions to Pb²⁺, Zn²⁺, Ni²⁺, Cd²⁺ ions in their mixture solution by the synthesized HA nanoparticles were studied. The adsorbent showed huge adsorption capacities for the targets (Pb²⁺ = 3289 mg/g, Zn²⁺ = 3150 mg/g, Ni²⁺ = 3061 mg/g and Cd²⁺ = 2784 mg/g), which indicated an excellent performance of the synthesized nano material in water treatment. Freundlich equation analysis and SEM images of the adsorption products suggested multilayer adsorptions to the targets, and a new recrystalline type adsorption on the surface of the host was found. Some Ca atoms in HA nanoparticles were also found to be substituted by the heavy metallic elements in the initial stage of the adsorptions. The synthesized nano material exhibits better application prospect in wastewater treatment field for its easy synthesis, low-cost and environmental friendly properties.

Nonlinear Optical Methods for Characterization of Molecular Structure and Surface Chemistry

The principles, strengths and limitations of several nonlinear optical (NLO) methods for characterizing biological systems are reviewed. NLO methods encompass a wide range of approaches that can be used for real-time, in-situ characterization of biological systems, typically in a label-free mode. Multiphoton excitation fluorescence (MPEF) is widely used for high-quality imaging based on electronic transitions, but lacks interface specificity. Second harmonic generation (SHG) is a parametric process that has all the virtues of the two-photon version of MPEF, yielding a signal at twice the frequency of the excitation light, which provides interface specificity. Both SHG and MPEF can provide images with high structural contrast, but they typically lack molecular or chemical specificity. Other NLO methods such as coherent anti-Stokes Raman scattering (CARS) and stimulated Raman scattering (SRS) can provide high-sensitivity imaging with chemical information since Raman active vibrations are probed. However, CARS and SRS lack interface and surface specificity. A NLO method that provides both interface/surface specificity as well as molecular specificity is vibrational sum frequency generation (SFG) spectroscopy. Vibration modes that are both Raman and IR active are probed in the SFG process, providing the molecular specificity. SFG, like SHG, is a parametric process, which provides the interface and surface specificity. SFG is typically done in the reflection mode from planar samples. This has yielded rich and detailed information about the molecular structure of biomaterial interfaces and biomolecules interacting with their surfaces. However, 2-D systems have limitations for understanding the interactions of biomolecules and interfaces in the 3-D biological environment. The recent advances made in instrumentation and analysis methods for sum frequency scattering (SFS) now present the opportunity for SFS to be used to directly study biological solutions. By detecting the scattering at angles away from the phase-matched direction even centrosymmetric structures that are isotropic (e.g., spherical nanoparticles functionalized with self-assembled monolayers or biomolecules) can be probed. Often a combination of multiple NLO methods or a combination of a NLO method with other spectroscopic methods is required to obtain a full understanding of the molecular structure and surface chemistry of biomaterials and the biomolecules that interact with them. Using the right combination methods provides a powerful approach for characterizing biological materials.

A Parametric Rosetta Energy Function Analysis with LK Peptides on SAM Surfaces

Although structures have been determined for many soluble proteins and an increasing number of membrane proteins, experimental structure determination methods are limited for complexes of proteins and solid surfaces. An economical alternative or complement to experimental structure determination is molecular simulation. Rosetta is one software suite that models protein-surface interactions, but Rosetta is normally benchmarked on soluble proteins. For surface interactions, the validity of the energy function is uncertain because it is a combination of independent parameters from energy functions developed separately for solution proteins and mineral surfaces. Here, we assess the performance of the RosettaSurface algorithm and test the accuracy of its energy function by modeling the adsorption of leucine/lysine (LK)-repeat peptides on methyl- and carboxy-terminated self-assembled monolayers (SAMs). We investigated how RosettaSurface predictions for this system compare with the experimental results, which showed that on both surfaces, LK-α peptides folded into helices and LK-β peptides held extended structures. Utilizing this model system, we performed a parametric analysis of Rosetta's Talaris energy function and determined that adjusting solvation parameters offered improved predictive accuracy. Simultaneously increasing lysine carbon hydrophilicity and the hydrophobicity of the surface methyl head groups yielded computational predictions most closely matching the experimental results. De novo models still should be interpreted skeptically unless bolstered in an integrative approach with experimental data.

LK peptide side chain dynamics at interfaces are independent of secondary structure

Real-time observation of the ultrafast motions of leucine side chains within model peptides at the water–air interface with representative folds – α-helix, 3₁₀-helix, β-strand – show that interfacial dynamics are mostly determined by surface interactions.

Evidence of a molecular boundary lubricant at snakeskin surfaces

During slithering locomotion the ventral scales at a snake's belly are in direct mechanical interaction with the environment, while the dorsal scales provide optical camouflage and thermoregulation. Recent work has demonstrated that compared to dorsal scales, ventral scales provide improved lubrication and wear protection. While biomechanic adaption of snake motion is of growing interest in the fields of material science and robotics, the mechanism for how ventral scales influence the friction between the snake and substrate, at the molecular level, is unknown. In this study, we characterize the outermost surface of snake scales using sum frequency generation (SFG) spectra and near-edge X-ray absorption fine structure (NEXAFS) images collected from recently shed California kingsnake (Lampropeltis californiae) epidermis. SFG's nonlinear optical selection rules provide information about the outermost surface of materials; NEXAFS takes advantage of the shallow escape depth of the electrons to probe the molecular structure of surfaces. Our analysis of the data revealed the existence of a previously unknown lipid coating on both the ventral and dorsal scales. Additionally, the molecular structure of this lipid coating closely aligns to the biological function: lipids on ventral scales form a highly ordered layer which provides both lubrication and wear protection at the snake's ventral surface.

(9R)-9-Hydroxystearate-Functionalized Hydroxyapatite as Antiproliferative and Cytotoxic Agent toward Osteosarcoma Cells

The possibility to functionalize calcium phosphates with bioactive agents is a promising strategy to design innovative biomaterials for bone repair able to couple the bioactive properties of the inorganic compounds with the therapeutic effect of the functionalizing agent. The R enantiomer of the 9-hydroxystearic acid, (9R)-9-HSA, produced from Dimorphotheca sinuata L. seeds, has proven to act as a natural negative regulator of tumor cell proliferation. On this basis, hydroxyapatite was synthesized with increasing contents of (9R)-9-hydroxystearate, up to ∼8.6 wt %. The incorporation of HSA in the composite nanocrystals induces a reduction of the crystal mean dimensions and of the length of the coherently scattering crystalline domains, which suggest a preferential adsorption onto the hydroxyapatite crystal faces parallel to the c-axis direction. The composite nanocrystals were designed so that their cytostatic and cytotoxic effects toward osteosarcoma cells were modulated by hydroxystearate content. In fact, results of in vitro tests show that the presence of HSA in the composite nanocrystals provokes a significant decrease in SaOS2 osteosarcoma cells proliferation and viability as well as an increase in lactate dehydrogenase, tumor necrosis factor α, and caspase 3 levels, with a cytotoxic effect increasing with HSA content in the nanocrystals.

Solid-state NMR studies of proteins immobilized on inorganic surfaces

Solid state NMR is the primary tool for studying the quantitative, site-specific structure, orientation, and dynamics of biomineralization proteins under biologically relevant conditions. Two calcium phosphate proteins, statherin (43 amino acids) and leucine rich amelogenin protein (LRAP; 59 amino acids), have been studied in depth and have different dynamic properties and 2D- and 3D-structural features. These differences make it difficult to extract design principles used in nature for building materials with properties such as high strength, unusual morphologies, or uncommon phases. Consequently, design principles needed for developing synthetic materials controlled by proteins are not clear. Many biomineralization proteins are much larger than statherin and LRAP, necessitating the study of larger biomineralization proteins. More recent studies of the significantly larger full-length amelogenin (180 residues) represent a significant step forward to ultimately investigate the full diversity of biomineralization proteins. Interactions of amino acids, a silaffin derived peptide, and the model LK peptide with silica are also being studied, along with qualitative studies of the organic matrices interacting with calcium carbonate. Dipolar recoupling techniques have formed the core of the quantitative studies, yet the need for isolated spin pairs makes this approach costly and time intensive. The use of multi-dimensional techniques to study biomineralization proteins is becoming more common, methodology which, despite its challenges with these difficult-to-study proteins, will continue to drive future advancements in this area.

Full membrane spanning self-assembled monolayers as model systems for UHV-based studies of cell-penetrating peptides

Biophysical studies of the interaction of peptides with model membranes provide a simple yet effective approach to understand the transport of peptides and peptide based drug carriers across the cell membrane. Herein, the authors discuss the use of self-assembled monolayers fabricated from the full membrane-spanning thiol (FMST) 3-((14-((4'-((5-methyl-1-phenyl-35-(phytanyl)oxy-6,9,12,15,18,21,24,27,30,33,37-undecaoxa-2,3-dithiahenpentacontan-51-yl)oxy)-[1,1'-biphenyl]-4-yl)oxy)tetradecyl)oxy)-2-(phytanyl)oxy glycerol for ultrahigh vacuum (UHV) based experiments. UHV-based methods such as electron spectroscopy and mass spectrometry can provide important information about how peptides bind and interact with membranes, especially with the hydrophobic core of a lipid bilayer. Near-edge x-ray absorption fine structure spectra and x-ray photoelectron spectroscopy (XPS) data showed that FMST forms UHV-stable and ordered films on gold. XPS and time of flight secondary ion mass spectrometry depth profiles indicated that a proline-rich amphipathic cell-penetrating peptide, known as sweet arrow peptide is located at the outer perimeter of the model membrane.

Investigation of the influence of coadsorbent dye upon the interfacial structure of dye-sensitized solar cells

The interface between Ru(tcterpy)(NCS)3TBA2 [black dye (BD); tcterpy = 4,4',4″-tricarboxy-2,2':6',2″-terpyridine, NCS = thiocyanato, TBA = tetrabutylammonium cation] and nanocrystalline TiO2, as found in dye-sensitized solar cells, is investigated by soft-X-ray synchrotron radiation and compared with the adsorption structure of cis-Ru(Hdcbpy)2(NCS)2TBA2 (N719; dcbpy = 4,4'-dicarboxy-2,2'-bipyridine) on TiO2 to elucidate the relationship between the adsorption mode of BD and the photocurrent with and without coadsorbed indoline dye D131. The depth profile is characterized with X-ray photoelectron spectroscopy and S K-edge X-ray absorption fine structure using synchrotron radiation. Both datasets indicate that one of the isothiocyanate groups of BD interacts with TiO2 via its S atom when the dye is adsorbed from a single-component solution. In contrast, the interaction is slightly suppressed when D131 is coadsorbed, indicated by the fact that the presence of D131 changes the adsorption mode of BD. Based upon these results, the number of BD dye molecules interacting with the substrate is shown to decrease by 10% when D131 is coadsorbed, and the dissociation is shown to be related to the short-circuit photocurrent in the 600-800 nm region. The design of a procedure to promote the preferential adsorption of D131 therefore leads to an improvement of the short-circuit current and conversion efficiency.

High-throughput analysis of molecular orientation on surfaces by NEXAFS imaging of curved sample arrays

Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy provides detailed information about the orientation and alignment of thin films. NEXAFS is a synchrotron-based technique-the availability of beam-time per user is typically limited to no more than a few weeks per year. The limited availability is currently a true barrier for using NEXAFS in combinatorial studies of molecular alignment. We have recently demonstrated how large area full field NEXAFS imaging allows users to pursue combinatorial studies of surface chemistry. Now we report an extension of this approach which allows the acquisition of orientation information from a single NEXAFS image. An array with 80 elements (samples), containing eight series of different surface modifications, was mounted on a curved substrate allowing the collection of NEXAFS spectra with a range of orientations with respect to the X-ray beam. Images collected from this array show how hyperspectral NEXAFS data collected from curved surfaces can be used for high-throughput molecular orientation analysis.

A study of phenylalanine side-chain dynamics in surface-adsorbed peptides using solid-state deuterium NMR and rotamer library statistics

Extracellular matrix proteins adsorbed onto mineral surfaces exist in a unique environment where the structure and dynamics of the protein can be altered profoundly. To further elucidate how the mineral surface impacts molecular properties, we perform a comparative study of the dynamics of nonpolar side chains within the mineral-recognition domain of the biomineralization protein salivary statherin adsorbed onto its native hydroxyapatite (HAP) mineral surface versus the dynamics displayed by the native protein in the hydrated solid state. Specifically, the dynamics of phenylalanine side chains (viz., F7 and F14) located in the surface-adsorbed 15-amino acid HAP-recognition fragment (SN15: DpSpSEEKFLRRIGRFG) are studied using deuterium magic angle spinning ((2)H MAS) line shape and spin-lattice relaxation measurements. (2)H NMR MAS spectra and T1 relaxation times obtained from the deuterated phenylalanine side chains in free and HAP-adsorbed SN15 are fitted to models where the side chains are assumed to exchange between rotameric states and where the exchange rates and a priori rotameric state populations are varied iteratively. In condensed proteins, phenylalanine side-chain dynamics are dominated by 180° flips of the phenyl ring, i.e., the "π flip". However, for both F7 and F14, the number of exchanging side-chain rotameric states increases in the HAP-bound complex relative to the unbound solid sample, indicating that increased dynamic freedom accompanies introduction of the protein into the biofilm state. The observed rotameric exchange dynamics in the HAP-bound complex are on the order of 5-6 × 10(6) s(-1), as determined from the deuterium MAS line shapes. The dynamics in the HAP-bound complex are also shown to have some solution-like behavioral characteristics, with some interesting deviations from rotameric library statistics.

Unveiling the membrane-binding properties of N-terminal and C-terminal regions of G protein-coupled receptor kinase 5 by combined optical spectroscopies

G protein-coupled receptor kinase 5 (GRK5) is thought to associate with membranes in part via N- and C-terminal segments that are typically disordered in available high-resolution crystal structures. Herein we investigate the interactions of these regions with model cell membrane using combined sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. It was found that both regions associate with POPC lipid bilayers but adopt different structures when doing so: GRK5 residues 2-31 (GRK5(2-31)) was in random coil whereas GRK5(546-565) was partially helical. When the subphase for the GRK5(2-31) peptide was changed to 40% TFE/60% 10 mM phosphate pH 7.4 buffer, a large change in the SFG amide I signal indicated that GRK5(2-31) became partially helical. By inspecting the membrane behavior of two different segments of GRK5(2-31), namely, GRK5(2-24) and GRK5(25-31), we found that residues 25-31 are responsible for membrane binding, whereas the helical character is imparted by residues 2-24. With SFG, we deduced that the orientation angle of the helical segment of GRK5(2-31) is 46 ± 1° relative to the surface normal in 40% TFE/60% 10 mM phosphate pH = 7.4 buffer but increases to 78 ± 11° with higher ionic strength. We also investigated the effect of PIP2 in the model membrane and concluded that the POPC:PIP2 (9:1) lipid bilayer did not change the behavior of either peptide compared to a pure POPC lipid bilayer. With ATR-FTIR, we also found that Ca(2+)·calmodulin is able to extract both peptides from the POPC lipid bilayer, consistent with the role of this protein in disrupting GRK5 interactions with the plasma membrane in cells.

Membrane orientation and binding determinants of G protein-coupled receptor kinase 5 as assessed by combined vibrational spectroscopic studies

G-protein coupled receptors (GPCRs) are integral membrane proteins involved in a wide variety of biological processes in eukaryotic cells, and are targeted by a large fraction of marketed drugs. GPCR kinases (GRKs) play important roles in feedback regulation of GPCRs, such as of β-adrenergic receptors in the heart, where GRK2 and GRK5 are the major isoforms expressed. Membrane targeting is essential for GRK function in cells. Whereas GRK2 is recruited to the membrane by heterotrimeric Gβγ subunits, the mechanism of membrane binding by GRK5 is not fully understood. It has been proposed that GRK5 is constitutively associated with membranes through elements located at its N-terminus, its C-terminus, or both. The membrane orientation of GRK5 is also a matter of speculation. In this work, we combined sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) to help determine the membrane orientation of GRK5 and a C-terminally truncated mutant (GRK51-531) on membrane lipid bilayers. It was found that GRK5 and GRK51-531 adopt a similar orientation on model cell membranes in the presence of PIP2 that is similar to that predicted for GRK2 in prior studies. Mutation of the N-terminal membrane binding site of GRK5 did not eliminate membrane binding, but prevented observation of this discrete orientation. The C-terminus of GRK5 does not have substantial impact on either membrane binding or orientation in this model system. Thus, the C-terminus of GRK5 may drive membrane binding in cells via interactions with other proteins at the plasma membrane or bind in an unstructured manner to negatively charged membranes.

SFG analysis of surface bound proteins: a route towards structure determination

The surface of a material is rapidly covered with proteins once that material is placed in a biological environment. The structure and function of these bound proteins play a key role in the interactions and communications of the material with the biological environment. Thus, it is crucial to gain a molecular level understanding of surface bound protein structure. While X-ray diffraction and solution phase NMR methods are well established for determining the structure of proteins in the crystalline or solution phase, there is not a corresponding single technique that can provide the same level of structural detail about proteins at surfaces or interfaces. However, recent advances in sum frequency generation (SFG) vibrational spectroscopy have significantly increased our ability to obtain structural information about surface bound proteins and peptides. A multi-technique approach of combining SFG with (1) protein engineering methods to selectively introduce mutations and isotopic labels, (2) other experimental methods such as time-of-flight secondary ion mass spectrometry (ToF-SIMS) and near edge X-ray absorption fine structure (NEXAFS) to provide complementary information, and (3) molecular dynamic (MD) simulations to extend the molecular level experimental results is a particularly promising route for structural characterization of surface bound proteins and peptides. By using model peptides and small proteins with well-defined structures, methods have been developed to determine the orientation of both backbone and side chains to the surface.

Membrane orientation of Gα(i)β(1)γ(2) and Gβ(1)γ(2) determined via combined vibrational spectroscopic studies

The manner in which the heterotrimeric G protein complexes Gβ1γ2 and Gαiβ1γ2 interact with membranes is likely related to their biological function. We combined complementary measurements from sum frequency generation (SFG) vibrational and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy to determine the possible membrane orientations of Gβ1γ2 and the Gαiβ1γ2 heterotrimer more precisely than could be achieved using SFG alone. The most likely orientations of Gβ1γ2 and the Gαiβ1γ2 heterotrimer were both determined to fall within a similar narrow range of twist and tilt angles, suggesting that Gβ1γ2 may bind to Gαi without a significant change in orientation. This "basal" orientation seems to depend primarily on the geranylgeranylated C-terminus of Gγ2 along with basic residues at the N-terminus of Gαi, and suggests that activated G protein-coupled receptors (GPCRs) must reorient G protein heterotrimers at lipid bilayers to catalyze nucleotide exchange. The innovative methodologies developed in this paper can be widely applied to study the membrane orientation of other proteins in situ.