A Metal–Organic Framework-Based Material for Electrochemical Sensing of Carbon Dioxide

Investigation of Ultramicroporous Structure of One-Dimensional Lepidocrocite Titanates Using Carbon Dioxide and Nitrogen Gases

The novel material, one-dimensional lepidocrocite (1DL) titanate, is attracting industrial and scientific interest because of its applicability to a wide range of practical applications and its ease of synthesis and scale up of production. In this study, we investigated the CO2 adsorption capability and pore structures of 1DL freeze-dried and lithium chloride washed air-dried powders. The synthesized 1DL was characterized by X-ray diffraction, Raman spectroscopy, and scanning electron microscopy. Using the constant-volume method, CO2 gas adsorption revealed that the 1DL exhibits type IV adsorption-desorption isotherms. The heats of adsorption obtained from the adsorption branches are lower than those obtained from the desorption branches. Brunauer-Emmett-Teller (BET) analysis, using N2 gas adsorption isotherms at 77 K showed that 1DL possesses 80.2 m2/g of BET specific surface area. Nonlocal density functional theory analysis indicated that two types of pores, meso-pores and ultramicro pores, exist in the 1DL freeze-dried powders. This work provides deep insights into the pore structures and CO2 adsorption mechanisms of 1DL powders.

Novel Chemoresistive Sensors for Indoor CO2 Monitoring: Validation in an Operational Environment

Health and safety considerations of indoor occupants in enclosed spaces are crucial for building management which involves the strict control and monitoring of carbon dioxide levels to maintain acceptable air quality standards. For this study, we developed a wireless, noninvasive, and portable platform for the continuous monitoring of carbon dioxide concentration in enclosed environments, i.e., academic rooms. The system aimed to monitor and detect carbon dioxide using novel low-cost metal oxide-based chemoresistive sensors, achieving sensing performance comparable to those of commercially available detectors based on optical working principle, e.g., nondispersive infrared sensors. In particular, a predictive study of carbon dioxide levels was performed by exploiting random forest and curve fitting algorithms on chemoresistive sensor data collected in an academic room, then comparing the results with lab-based measurements. The performance of the models was evaluated with real environment conditions during 7 weeks. The field measurements were conducted to validate and support the development of the system for real-time monitoring and alerting in the presence of relevant concentrations (above 1,000 ppm). Therefore, the study highlighted that the curve fitting model obtained was able to recognize with an F1-score of 0.77 the presence of poor air quality, defined as concentration above 1,000 ppm of carbon dioxide as reported by the Occupational Safety and Health Administration.

γ-Cyclodextrin metal-organic frameworks as the promising carrier for pulmonary delivery of cyclosporine A

γ-Cyclodextrin metal-organic frameworks (CD-MOFs) are considered as a green and biocompatible material with great potential in drug delivery systems. Original CD-MOFs show the poor aerosol properties, which limit the application in pulmonary drug delivery. To improve the in vitro deposition properties, herein, we synthesized CD-MOFs by the vapor diffusion method using a series of modulators to achieve better pulmonary delivery of cyclosporine A (CsA). The results showed that blank CD-MOFs and drug loaded CD-MOFs prepared with different modulators all preserved the cubical shape, and exhibited the similar crystal form, structural characteristics, thermal behaviors and release properties. In addition, drug loaded CD-MOFs prepared with polyethylene glycol 10000 (PEG 10000) as a modulator exhibited better in vitro aerosol performance than those of synthesized using other modulators, and the in vivo pharmacokinetics data demonstrated that the bioavailability of CsA could be significantly enhanced by inhalation administration of drug loaded CD-MOFs compared with oral administration of Neoral®. The repeated dose inhalation toxicity also confirmed the fine biocompatibility of CD-MOFs as the carrier for pulmonary drug delivery. Therefore, the results demonstrated CD-MOFs as the promising carrier could be used for pulmonary drug delivery.

Trajectory in biological metal-organic frameworks: Biosensing and sustainable strategies-perspectives and challenges

The ligand attribute of biomolecules to form coordination bonds with metal ions led to the discovery of a novel class of materials called biomolecule-associated metal-organic frameworks (Bio-MOFs). These biomolecules coordinate in multiple ways and provide versatile applications. Far-spread bio-ligands include nucleobases, amino acids, peptides, cyclodextrins, saccharides, porphyrins/metalloporphyrin, proteins, etc. Low-toxicity, self-assembly, stability, designable and selectable porous size, the existence of rigid and flexible forms, bio-compatibility, and synergistic interactions between metal ions have led Bio-MOFs to be commercialized in industries such as sensors, food, pharma, and eco-sensing. The rapid growth and commercialization are stunted by absolute bio-compatibility issues, bulk morphology that makes it rigid to alter shape/porosity, longer reaction times, and inadequate research. This review elucidates the structural vitality, biocompatibility issues, and vital sensing applications, including challenges for incorporating bio-ligands into MOF. Critical innovations in Bio-MOFs' applicative spectrum, including sustainable food packaging, biosensing, insulin and phosphoprotein detection, gas sensing, CO2 capture, pesticide carriers, toxicant adsorptions, etc., have been elucidated. Emphasis is placed on biosensing and biomedical applications with biomimetic catalysis and sensitive sensor designing.

A Solution-Processable Porphyrin-Based Hydrogen-Bonded Organic Framework for Photoelectrochemical Sensing of Carbon Dioxide

Detecting CO2 in complex gas mixtures is challenging due to the presence of competitive gases in the ambient atmosphere. Photoelectrochemical (PEC) techniques offer a solution, but material selection and specificity remain limiting. Here, we constructed a hydrogen-bonded organic framework material based on a porphyrin tecton decorated with diaminotriazine (DAT) moieties. The DAT moieties on the porphyrin molecules not only facilitate the formation of complementary hydrogen bonds between the tectons but also function as recognition sites in the resulting porous HOF materials for the selective adsorption of CO2 . In addition, the in-plane growth of FDU-HOF-2 into anisotropic molecular sheets with large areas of up to 23000 μm2 and controllable thickness between 0.298 and 2.407 μm were realized in yields of over 89 % by a simple solution-processing method. The FDU-HOF-2 can be directly grown and deposited onto different substrates including silica, carbon, and metal oxides by self-assembly in situ in formic acid. As a proof of concept, a screen-printing electrode deposited with FDU-HOF-2 was fabricate as a label-free photoelectrochemical (PEC) sensor for CO2 detection. Such a signal-off PEC sensor exhibits low detection limit for CO2 (2.3 ppm), reusability (at least 30 cycles), and long-term working stability (at least 30 days).

Chiral MOF Derived Wearable Logic Sensor for Intuitive Discrimination of Physiologically Active Enantiomer

Chiral sensors have attracted growing interest due to their application in health monitoring. However, rational design of wearable logic chiral sensors remains a great challenge. In this work, a dual responsive chiral sensor RT@CDMOF is prepared through in situ self-assembly of chiral γ-cyclodextrin metal-organic framework (CDMOF), rhodamine 6G hydrazide (RGH), and tetracyanovinylindane (TCN). The embedded RGH and TCN inherit the chirality of host CDMOF, producing dual changes both in fluorescence and reflectance. RT@CDMOF is explored as a dual channel sensor for chiral discrimination of lactate enantiomers. Comprehensive mechanistic studies reveal the chiral binding process, and carboxylate dissociation is confirmed by impedance and solid-state 1 H nuclear magnetic resonance (NMR). A flexible membrane sensor is successfully fabricated based on RT@CDMOF for wearable health monitoring. Practical evaluation confirms the potential of fabricated membrane sensor in point-of-care health monitoring by indexing the exercise intensity. Based on above, a chiral IMPLICATION logic unit can be successfully achieved, demonstrating the promising potential of RT@CDMOF in design and assembly of novel smart devices. This work may open a new avenue to the rational design of logic chiral sensors for wearable health monitoring applications.

Ultrahigh Proton Conductivities of Postmodified Hf(IV) Metal-Organic Frameworks and Related Chitosan-Based Composite Membranes

Recently, researchers have focused on preparing and studying proton exchange membranes. Metal-organic frameworks (MOFs) are candidates for composite membrane fillers due to their high crystallinity and structural characteristics, and Hf-based MOFs have attracted our attention with their high porosity and high stability. Therefore, in this study, Hf-based MOFs were doped into a cost-effective chitosan matrix as fillers to fabricate composite films having excellent proton conductivity (σ). First, the nanoscale MOFs Hf-UiO-66-(OH)₂ (1) and Hf-UiO-66-NH₂ (2) were chemically modified by a ligand design strategy to obtain SA-1 and CBD-2 bearing free -COOH units. The proton conductivities of SA-1 and CBD-2 under optimal test conditions reached 1.23 × 10^-2 and 0.71 × 10^-2 S cm^-1. After that, we prepared composite membranes CS/SA-1 and CS/CBD-2 by the casting method; tests revealed that the introduction of MOFs improved the stabilities and σ values of the membranes, and their best σ could reach above 10^-2 S cm^-1 under 100 °C/98% RH. Further structural characterization and activation energy calculation revealed the conductive mechanism of the composite films. This investigation not only proposes a novel chemical modification method for optimizing the σ of MOFs but also promotes the development of MOF-doped composite membranes and provides a basis for future applications of MOFs in fuel cells.

Preservation of Proteins in Human Plasma through Metal-Organic Framework Encapsulation

Traditional cold chain systems of collection, transportation, and storage of biofluid specimens for eventual analysis pose a huge financial and environmental burden. These systems are impractical in pre-hospital and resource-limited settings, where refrigeration and electricity are not reliable or even available. Here, we develop an innovative technology using metal-organic frameworks (MOFs), a novel class of organic-inorganic hybrids with high thermal stability, as encapsulates for preserving the integrity of protein biomarkers in biofluids under ambient or non-refrigerated storage conditions. We encapsulate prostate-specific antigen (PSA) in whole patient plasma using hydrophilic zeolitic imidazolate framework-90 (ZIF-90) for preservation at 40 °C for 4 weeks and eventual on-demand reconstitution for antibody-based assays with recovery above 95% compared to storage at -20 °C. Without ZIF-90 encapsulation, only 10-30% of the PSA immunoactivity remained. Furthermore, we demonstrate encapsulation of multiple cancer biomarker proteins in whole patient plasma using ZIF-8 or ZIF-90 encapsulants for eventual on-demand reconstitution and analysis after 1 week at 40 °C. Overall, MOF encapsulation of patient biofluids is important as climate change may be affecting the stability and increase costs of maintaining biospecimen cold chain custody for the collection, transportation, and storage of biospecimens prior to analysis or for biobanking regardless of any countries' affluence.

A Review of Gas Measurement Practices and Sensors for Tunnels

The concentration of pollutant gases emitted by traffic in a tunnel affects the indoor air quality and contributes to structural deterioration. Demand control ventilation systems incur high operating costs, so reliable measurement of the gas concentration is essential. Numerous commercial sensor types are available with proven experience, such as optical and first-generation electrochemical sensors, or novel materials in detection methods. However, all of them are subjected to measurement deviations due to environmental conditions. This paper presents the main types of sensors and their application in tunnels. Solutions will also be discussed in order to obtain reliable measurements and improve the efficiency of the extraction systems.

Carbon-Carbon Linked Organic Frameworks: An Explicit Summary and Analysis

Organic frameworks with carbon-carbon (CC) linkage are an important class of materials owing to their outstanding chemical stability and extended π-electron delocalization resulting in unique optoelectronic properties. In the first part of this review article, the design principles for the bottom-up synthesis of 2D and 3D sp/sp² CC linked organic frameworks are summarized. Representative reaction methodologies, such as Knoevenagel condensation, Aldol condensation, Horner-Wadsworth-Emmons reaction, Wittig reaction, and coupling reactions (Ullmann, Suzuki, Heck, Yamamoto, etc.) are included. This is discussed in the context of their reaction mechanism, reaction dynamics, and whether and why resulting in an amorphous or crystalline product. This is followed by a discussion of different state-of-the art bottom-up synthesis methodologies, like solvothermal, interfacial, and solid-state synthesis. In the second part, the structure-property relationships in CC linked organic frameworks with representative examples of organocatalysis, photo(electro)catalysis, energy storage and conversion, magnetism, and molecular storage and separation are analyzed. The importance of linkage type, building blocks, topology, and crystallinity of the framework material in connection with the structure-property relationship is highlighted. Finally, brief concluding remarks are presented based on the key development of bottom-up synthetic methods and provide perspectives for future development in this field.

Carrier gas triggered controlled biolistic delivery of DNA and protein therapeutics from metal-organic frameworks

The efficacy and specificity of protein, DNA, and RNA-based drugs make them popular in the clinic; however, these drugs are often delivered via injection, requiring skilled medical personnel, and producing biohazardous waste. Here, we report an approach that allows for their controlled delivery, affording either a burst or slow release without altering the formulation. We show that when encapsulated within zeolitic-imidazolate framework eight (ZIF-8), the biomolecules are stable in powder formulations and can be inoculated with a low-cost, gas-powered "MOF-Jet" into living animal and plant tissues. Additionally, their release profiles can be modulated through judicious selection of the carrier gas used in the MOF-Jet. Our in vitro and in vivo studies reveal that when CO₂ is used, it creates a transient and weakly acidic local environment that causes a near-instantaneous release of the biomolecules through an immediate dissolution of ZIF-8. Conversely, when air is used, ZIF-8 biodegrades slowly, releasing the biomolecules over a week. This is the first example of controlled-biolistic delivery of biomolecules using ZIF-8, which provides a powerful tool for fundamental and applied science research.

Cyclodextrin metal-organic framework-based protein biocomposites

Materials are needed to increase the stability and half-life of therapeutic proteins during delivery. These materials should be biocompatible and biodegradable. Here, we demonstrate that enzymes and immunoproteins can be encapsulated inside cyclodextrin based metal-organic frameworks using potassium as the metal node. The release profile can be controlled with the solubility of the cyclodextrin linker. The activity of the proteins after release is determined using catalytic and in vitro assays. The results show that cyclodextrin metal-organic framework-based protein biocomposites are a promising class of materials to deliver therapeutic proteins.

Nanoreactor Based on Cyclodextrin for Direct Electrocatalyzed Ammonia Synthesis

The high-efficiency transition metal-free electrocatalytic nitrate reduction reaction (NO₃^-RR) for ammonia synthesis has received more attention because of its green and environmentally friendly characteristics. Here, we report an efficient electrochemical NH₃ synthesis directly from purely organic macrocyclic compounds α-, β-, and γ-cyclodextrins (CDs)-catalyzed transition metal-free electroreduction of nitrate under ambient conditions. In comparison with α-, and β-CDs, parent γ-CD presented uncommon catalytic performance with a relatively higher NH₃ yield that can reach up to 2.28 mg h^-1 cm^-2 with a Faradaic efficiency (FE) of 63.2% at -0.9 V versus a reversible hydrogen electrode in alkaline medium, and the potassium ion-coordinated γ-CD complex can achieve a maximum NH₃ production rate up to 4.66 mg h^-1 cm^-2 with an NH₃ FE of 79.3%. Further comparison with permethyl-γ-CD, d-glucose, and poly(vinyl alcohol) for the NO₃^-RR indicated that the typical torus-shaped cyclic conformation and edge hydroxyl groups of parent CDs play important roles in the electrocatalytic process. The K⁺-mediated 3D γ-CD-K⁺ frameworks containing six CDs as nanoreactors greatly strengthen the enrichment effect of nitrate through hydrogen-bonding interaction and electrostatic interaction and promote the mass transfer, thus leading to the efficient NO₃^-RR in an alkaline electrolyte. This work provides a convenient, green, and economic method for high-performance NO₃^-RR, which has potential applications in the fields of environment, energy, and industry.

Organo-macrocycle-containing hierarchical metal-organic frameworks and cages: design, structures, and applications

Developing hierarchical ordered systems is challenging. Using organo-macrocycles to construct metal-organic frameworks (MOFs) and porous coordination cages (PCCs) provides an efficient way to obtain hierarchical assemblies. Macrocycles, such as crown ethers, cyclodextrins, calixarenes, cucurbiturils, and pillararenes, can be incorporated within MOFs/PCCs and they also endow the resultant composites with enhanced properties and functionalities. This review summarizes recent developments of organo-macrocycle-containing hierarchical MOFs/PCCs, emphasizing applications and structure-property relationships of these hierarchically porous materials. This review provides insights for future research on hierarchical self-assembly using macrocycles as building blocks and functional ligands to extend the applications of the composites.

Carbon Dioxide Capture at Nucleophilic Hydroxide Sites in Oxidation-Resistant Cyclodextrin-Based Metal-Organic Frameworks

Carbon capture and sequestration (CCS) from industrial point sources and direct air capture are necessary to combat global climate change. A particular challenge faced by amine-based sorbents-the current leading technology-is poor stability towards O₂ . Here, we demonstrate that CO₂ chemisorption in γ-cylodextrin-based metal-organic frameworks (CD-MOFs) occurs via HCO₃ ^- formation at nucleophilic OH^- sites within the framework pores, rather than via previously proposed pathways. The new framework KHCO₃ CD-MOF possesses rapid and high-capacity CO₂ uptake, good thermal, oxidative, and cycling stabilities, and selective CO₂ capture under mixed gas conditions. Because of its low cost and performance under realistic conditions, KHCO₃ CD-MOF is a promising new platform for CCS. More broadly, our work demonstrates that the encapsulation of reactive OH^- sites within a porous framework represents a potentially general strategy for the design of oxidation-resistant adsorbents for CO₂ capture.

Cyclodextrin metal-organic frameworks and derivatives: recent developments and applications

While there is a tremendous amount of scientific research on metal organic frameworks (MOFs) for gas storage/separation, catalysis and energy storage, the development and application of biocompatible MOFs still poses major challenges. In general, they can be synthesised from various biocompatible linkers and metal ions but particularly cyclodextrins (CDs) as cyclic oligosaccharides are an astute choice for the former. Although the field of CD-MOF materials is still in the early stages and their design and fabrication comes with many hurdles, the benefits coming from CDs built in a porous framework are exciting. Versatile host-guest complexation abilities, high encapsulation capacity and hydrophilicity are among the valuable properties inherent to CDs and offer extended and novel applications to MOFs. In this review, we provide an overview of the state-of-the-art synthesis, design, properties and applications of these materials. Initially, a rationale for the preparation of CD-based MOFs is provided, based on the chemical and structural properties of CDs and including their advantages and disadvantages. Further on, the review exhaustively surveys CD-MOF based materials by categorising them into three sub-classes, namely (i) CD-MOFs, (ii) CD-MOF hybrids, obtained via combination with external materials, and (iii) CD-MOF-derived materials prepared under pyrolytic conditions. Subsequently, CD-based MOFs in practical applications, such as drug delivery and cancer therapy, sensors, gas storage, (enantiomer) separations, electrical devices, food industry, and agriculture, are discussed. We conclude by summarizing the state of the art in the field and highlighting some promising future developments of CD-MOFs.

Helically Chiral Hybrid Cyclodextrin Metal-Organic Framework Exhibiting Circularly Polarized Luminescence

Three achiral polycyclic aromatic fluorophores─namely, 1-pyrenecarboxylic acid, 9-anthracenecarboxylic acid, and perylene-3,9-dicarboxylic acid─were chosen based on their desired properties before being incorporated into the construction of a K⁺-carrying gamma-cyclodextrin (γ-CD)-based metal-organic framework (CD-MOF-1) and γ-CD-containing hybrid frameworks (CD-HFs). Among these fluorophores, only the pyrene-carrying one shows significant noncovalent bonding interactions with γ-CD in solution. This fluorophore is encapsulated in a CD-HF with a trigonal superstructure instead of the common cubic CD-MOF-1 found in the case of the other two fluorophores. Single-crystal X-ray diffraction analysis of the trigonal CD-HF reveals a π-stacked chiral positioning of the pyrene-carrying fluorophore inside the (γ-CD)₂ tunnels and held uniformly around an enantiomorphous 3₂ screw axis along the c direction in the solid-state structure. This helix-like structure demonstrates an additional level of chirality over and above the point-chiral stereogenic centers of γ-CD and the axial chirality associated with the self-assembled π-stacked fluorophores. These arrangements result in specifically generated photophysical and chiroptical properties, such as the controlled emergence of circularly polarized luminescence (CPL) emission. In this manner, a complete understanding of the mechanism of chirality transfer from a chiral host (CD-HF) to an encapsulated achiral fluorophore has been achieved, an attribute which is often missing in the development of materials with CPL.

Ratiometric Thermometers Based on Rhodamine B and Fluorescein Dye-Incorporated (Nano) Cyclodextrin Metal-Organic Frameworks

Macro- and nanosized core, as well as core-shell, γ-cyclodextrin metal-organic frameworks (γ-CD-MOFs) have been designed and used as platforms for the encapsulation of dye molecules to develop the first CD-MOF-based ratiometric optical thermometer materials. A novel dye combination was employed for this purpose, i.e., the duo rhodamine B (RhB) and fluorescein (FL). RhB is highly temperature-sensitive, whereas FL is less temperature-sensitive, and its luminescence emission peak is used as a reference. Promising results in terms of thermometric properties were obtained for a series of dye-encapsulated γ-CD-MOF materials based on this dye combination, with high relative sensitivities, even up to 5%K^-1, for the dye-encapsulated 75%RhB-25%FL nanosized γ-CD-MOF, among the highest performance values reported so far for luminescent dual thermometers. In our study, we have additionally developed a simple yet effective preparation method for core-shell γ-CD-MOFs, allowing effective manipulation of the γ-CD-MOF shell growth. The proposed method allows incorporation of the FL and RhB dyes in the γ-CD-MOFs in a more controlled manner, enhancing the efficiency of the developed ratiometric (macro) γ-CD-MOF thermometers.

Chaotropic Effect as an Assembly Motif to Construct Supramolecular Cyclodextrin-Polyoxometalate-Based Frameworks

In aqueous solution, low-charged polyoxometalates (POMs) exhibit remarkable self-assembly properties with nonionic organic matter that have been recently used to develop groundbreaking advances in host-guest chemistry, as well as in soft matter science. Herein, we exploit the affinity between a chaotropic POM and native cyclodextrins (α-, β-, and γ-CD) to enhance the structural and functional diversity of cyclodextrin-based open frameworks. First, we reveal that the Anderson-Evans type polyoxometalate [AlMo₆O₁₈(OH)₆]^3- represents an efficient inorganic scaffold to design open hybrid frameworks built from infinite cyclodextrin channels connected through the disk-shaped POM. A single-crystal X-ray analysis demonstrates that the resulting supramolecular architectures contain large cavities (up to 2 nm) where the topologies are dictated by the rotational symmetry of the organic macrocycle, generating honeycomb (bnn net) and checkerboard-like (pcu net) networks for α-CD (C₆) and γ-CD (C₈), respectively. On the other hand, the use of β-CD, a macrocycle with C₇ ideal symmetry, led to a distorted-checkerboard-like network. The cyclodextrin-based frameworks built from an Anderson-Evans type POM are easily functionalizable using the molecular recognition properties of the macrocycle building units. As a proof of concept, we successfully isolated a series of compartmentalized functional frameworks by the entrapment of polyiodides or superchaotropic redox-active polyanions within the macrocyclic host matrix. This set of results paves the way for designing multifunctional supramolecular frameworks whose pore dimensions are controlled by the size of inorganic entities.

Microfluidic Synthesis of a Bioactive Metal-Organic Framework for Glucose-Responsive Insulin Delivery

In the current study, we report the microfluidic synthesis of a metal-organic framework (MOF) for insulin delivery based on the stimulus response of glucose. Insulin- and gold nanoparticle (AuNP)-encapsulated zeolitic imidazolate framework-8 (ZIF-8) was synthesized using a continuous-flow, microfluidic mixing system via a single-step process. Glucose oxidase mimicking the activity of AuNPs was utilized for oxidizing glucose molecules that entered the porous ZIF-8. The AuNPs oxidized glucose into gluconic acid and hydrogen peroxide inside the MOF (Ins-AuNP-ZIF-8). The resulting acidic pH led to the disruption of ZIF-8 and released insulin. Thus, the presence of glucose molecules provided a stimulus for insulin release. The bioactive MOFs were characterized for the presence of functional groups, morphology, crystallinity, size, and elemental confirmation. The presence of fluorescein-5-isothiocyanate-labeled insulin in the composite was confirmed using confocal laser scanning microscopy. The loading of insulin per unit weight of the MOF, determined by size-exclusion-high-performance liquid chromatography, was 77 and 88% in the batch and microfluidic processes, respectively. Drug release studies confirmed the response of the MOFs to glucose, which triggered insulin release. The synthesis process did not affect the characteristics and application of ZIF-8 and Ins-AuNP-ZIF-8. This study involving the facile synthesis of bioactive MOFs offers a sustainable strategy to design stimulus-responsive drug delivery systems and could be exploited for biosensing applications.

A proton-conductive metal-organic framework based on imidazole and sulphate ligands

A metal-organic framework (MOF) built from a combination of metal cations, neutral azole ligands and sulphate anions, [Cu₂(DHBDI)₃(SO₄)₂]_n (1, DHBDI = 1H,5H-benzo[1,2-d:4,5-d']diimidazole), was synthesized. MOF 1 exhibits good chemical stability in acids, bases and boiling water while showing high hydrophilicity. Meanwhile, MOF 1 exhibits a proton conductivity of 1.14 × 10^-3 S cm^-1 at 90 °C and 98% RH, among the best for MOF materials with uncoordinated N sites. Temperature-dependent conductivity measurements suggest a vehicle mechanism (E_a = 0.64 eV) for proton transport.

Tuning CO2 sensing properties of HPTS along with newly synthesized coordination polymers (CPs)

Coordination polymers (CPs), new functional hybrid materials, have received important attention due to their structural features and many different applications such as gas storage, catalysis, energy storage, small molecule adsorption, luminescence, and chemical sensors. In this study, two newly synthesized metal-organic frameworks (MOFs); [Mn₂(µ₄-dmg)-(µ₄-dmg)(µ-bipy)]_n (CP1) and [Mn₂(µ₄-dmg)(µ₄-dmg)(µ-dpeten)]_n (CP2); were used for sensing of gaseous carbon dioxide with a spectrofluorometric method with a dye, 8-hydroxypyrene-1, 3, 6-trisulfonic acid (HPTS) as matrix additive material for the first time. The ion-pair form of the HPTS was used in the polymethyl methacrylate matrix as a thin film form. When the HPTS based sensing slides along with the CPs, resulted in many advances such as high relative signal change and larger linear response range, improved sensor dynamics, and higher sensitivity with respect to the additive-free form. More specifically, in the presence of silver nanoparticles (AgNPs), the variation in relative signal intensities of CP1 and CP2 doped HPTS sensing agents were measured as 60 and 40% for the concentration range of 0-10% pCO₂, respectively. The aim of this study is to enhance the CO₂ response of HPTS with doped CPs due to their useful attributes and potential applications containing selective gas absorption.

Alkali /alkaline earth-based metal-organic frameworks for biomedical applications

With the steady development of metal-organic framework (MOF) materials, this peculiar class of three-dimensional materials has found application prospects in a myriad of areas. The integration of different metals with various categories of ligands engendered a full gamut of frameworks, which of course are supplemented by diversified modification methods. Amongst many metal centers utilized to design and synthesize targeted MOFs, alkali/alkaline earth metal-based MOFs are gaining significant attention because these metal centers can be regarded as human endogenous metals. Numerous studies have shown that alkali/alkaline earth metal MOFs (A/A-E MOFs) tend to have better properties than other metals. This is because A/A-E MOFs offer better biocompatibility, so it is expected to be used in a broader field of biomedicine in the near future. This review mainly introduces the application of A/A-E MOF materials in drug delivery, sensing, and some materials with unique biomedical applications, and elaborates the challenges, obstacles and development of some A/A-E MOF materials in the biomedical field.

Two metal-organic frameworks based on Sr2+ and 1,2,4,5-tetra-kis-(4-carb-oxy-phen-yl)benzene linkers

Two structurally different metal-organic frameworks based on Sr2+ ions and 1,2,4,5-tetra-kis-(4-carb-oxy-phen-yl)benzene linkers have been synthesized solvothermally in different solvent systems and studied with single-crystal X-ray diffraction technique. These are poly[[μ12-4,4',4'',4'''-(benzene-1,2,4,5-tetra-yl)tetra-benzoato](di-methyl-formamide)-distrontium(II)], [Sr2(C34H18O8)(C3H7NO)2] n , and poly[tetra-aqua-{μ2-4,4'-[4,5-bis-(4-carb-oxy-phen-yl)benzene-1,2-di-yl]dibenzoato}tris-trontium(II)], [Sr3(C34H20O8)2(H2O)4]. The differences are noted between the crystal structures and coordination modes of these two MOFs, which are responsible for their semiconductor properties, where structural control over the bandgap is desirable. Hydrogen bonding is present in only one of the compounds, suggesting it has a slightly higher structural stability.

Application of nanomaterials decorated with cyclodextrins as sensing elements for environment analysis

Environmental pollution has brought adverse socio-economic consequences. Organic pollutants and heavy metals are the main culprits of environmental pollution. It is of great importance to develop novel, simple, rapid, sensitive, and low-cost detection approaches for sensing trace pollutants in environmental samples. A lot of detection strategies which are based on varieties of nanomaterials have been developed for environmental analysis in past decades. In this review, we retrospect a variety of nanomaterials decorated with cyclodextrins (CDs), including carbon nanomaterials decorated with CDs, noble metal nanomaterials decorated with CDs and other nanomaterials decorated with CDs, and their application in environmental analysis. CDs is a type of ideal modifying molecules which could recognize targets, improve the solubility and dispersibility of corresponding functionalized materials, and enhance the detecting performance of designed sensors. CDs have been widely immobilized to carbon nanomaterials, noble metal nanomaterials, phosphorene (BP) nanocomposites, metal organic framework (MOF), and magnetic nanomaterials, and these nanocomposites have been utilized as the sensing elements for different target analytes. Immobilizing CDs on different nanomaterials could extremely expand the development of new sensing systems for environmental analysis based on these materials, greatly broaden the species of sensing targets, and apparently improve their sensing performance. Herein, the nanomaterials decorated with CDs, as sensing elements for environmental analysis, were reviewed including the types of nanomaterials decorated with CDs and their applications in various sensing strategies for environmental analysis. Finally, the perspectives of the nanomaterials decorated with CDs used as sensing elements were also discussed.

Material Screening for Gas Sensing Using an Electronic Nose: Gas Sorption Thermodynamic and Kinetic Considerations

To detect multiple gases in a mixture, one must employ an electronic nose or sensor array, composed of several materials, as a single material cannot resolve all the gases in a mixture accurately. Given the many candidate materials, choosing the right combination of materials to be used in an array is a challenging task. In a sensor whose sensing mechanism depends on a change in mass upon gas adsorption, both the equilibrium and kinetic characteristics of the gas-material system dictate the performance of the array. The overarching goal of this work is twofold. First, we aim to highlight the impact of thermodynamic characteristics of gas-material combination on array performance and to develop a graphical approach to rapidly screen materials. Second, we aim to highlight the need to incorporate the gas sorption kinetic characteristics to provide an accurate picture of the performance of a sensor array. To address these goals, we have developed a computational test bench that incorporates a sensor model and a gas composition estimator. To provide a generic study, we have chosen, as candidate materials, hypothetical materials that exhibit equilibrium characteristics similar to those of metal-organic frameworks. Our computational studies led to key learnings, namely, (1) exploit the shape of the sensor response as a function of gas composition for material screening purposes for gravimetric arrays; (2) incorporate both equilibrium and kinetics for gas composition estimation in a dynamic system; and (3) engineer the array by accounting for the kinetics of the materials, the feed gas flow rate, and the size of the device.

Recent Advances of Porous Materials Based on Cyclodextrin

Porous materials have attracted significant attention because of their rising applications in many fields. Cyclodextrins (CDs) are suitable building units in the fabrication of porous materials owing to their intrinsic nanoporous structure, easy modification, and biocompatibility, which may result in the formation of CD-based organic frameworks (including cyclodextrin metal-organic frameworks (CD-MOFs) and cyclodextrin covalent organic frameworks (CD-COFs)), and CD-based polymer hybrid porous materials. This review focuses on the recent progress in the fabrication and applications of CD-based porous materials with novel structures and functionalities.

Sensing Properties of NH2-MIL-101 Series for Specific Amino Acids via Turn-On Fluorescence

Metal-organic frameworks (MOFs) have been demonstrated to be desired candidates for sensing definite species owing to their tunable composition, framework structure and functionality. In this work, the NH2-MIL-101 series was utilized for sensing specific amino acids. The results show that cysteine (Cys) can significantly enhance the fluorescence emission of NH2-MIL-101-Fe suspended in water, while NH2-MIL-101-Al exhibits the ability to sense lysine (Lys), arginine (Arg) and histidine (His) in aqueous media via turn-on fluorescence emission. Titration experiments ensure that NH2-MIL-101-Fe and NH2-MIL-101-Al can selectively and quantitatively detect these amino acids. The sensing mechanism was examined and discussed. The results of this study show that the metal centers in MOFs are crucial for sensing specific amino acids.

Calcium-Based Metal-Organic Frameworks and Their Potential Applications

Metal-organic frameworks (MOFs) built on calcium metal (Ca-MOFs) represent a unique subclass of MOFs featuring high stability, low toxicity, and relatively low density. Ca-MOFs show considerable potential for molecular separations, electronic, magnetic, and biomedical applications, although they are not investigated as extensively as transition metal-based MOFs. Compared to MOFs made of other groups of metals, Ca-MOFs may be particularly advantageous for certain applications such as adsorption and storage of light molecules because of their gravimetric benefit, and drug delivery due to their high biocompatibility. This review intends to provide an overview on the recent development of Ca-MOFs, including their synthesis, crystal structures, important properties, and related applications. Various synthetic methods and techniques, types of building blocks, structure and porosity features, selected physical properties, and potential uses will be discussed and summarized. Representative examples will be illustrated for each type of important applications with a focus on their structure-property relations.

Gold nanoparticle decorated rGO-encapsulated metal-organic framework composite sensor for the detection of dopamine

In this study, by encapsulation of reduced graphene oxide (rGO) into Ni-based metal–organic framework (Ni-MOF) structure, the composite rGO@Ni-MOF was first prepared. Then, gold nanoparticle (AuNP) decorated rGO@Ni-MOF (rGO@Ni-MOF/AuNP) were obtained through the electrodeposition. The morphology and structure of rGO@Ni-MOF/AuNP were characterized by SEM, FTIR, and XRD. The rGO@Ni-MOF/AuNP modified electrode was used for the detection of dopamine. Combining the catalysis from Ni-MOF and AuNP with the conductivity of rGO endowed rGO@Ni-MOF/AuNP with synergetic high catalytic activity to the electrochemical oxidation of dopamine. The developed modified electrode had a good linear relationship with dopamine in the concentration range of 0.5∼120 μM, and the detection limit was 0.33 μM (S/N = 3). Additionally, the potential interferents, electrode stability, reproducibility, and practical applications were also studied and satisfactory results were obtained.

Buffered Coordination Modulation as a Means of Controlling Crystal Morphology and Molecular Diffusion in an Anisotropic Metal-Organic Framework

Significant advances have been made in the synthesis of chemically selective environments within metal-organic frameworks, yet materials development and industrial implementation have been hindered by the inability to predictively control crystallite size and shape. One common strategy to control crystal growth is the inclusion of coordination modulators, which are molecular species designed to compete with the linker for metal coordination during synthesis. However, these modulators can simultaneously alter the pH of the reaction solution, an effect that can also significantly influence crystal morphology. Herein, noncoordinating buffers are used to independently control reaction pH during metal-organic framework synthesis, enabling direct interrogation of the role of the coordinating species on crystal growth. We demonstrate the efficacy of this strategy in the synthesis of low-dispersity single-crystals of the framework Co₂(dobdc) (dobdc^4-= 2,5-dioxido-1,4-benzenedicarboxylate) in a pH 7-buffered solution using cobalt(II) acetate as the metal source. Density functional theory calculations reveal that acetate competitively binds to Co during crystallization, and by using a series of cobalt(II) salts with carboxylate anions of varying coordination strength, it is possible to control crystal growth along the c-direction. Finally, we use zero length column chromatography to show that crystal morphology has a direct impact on guest diffusional path length for the industrially important hydrocarbon m-xylene. Together, these results provide molecular-level insight into the use of modulators in governing crystallite morphology and a powerful strategy for the control of molecular diffusion rates within metal-organic frameworks.

Ultrahigh Carbon Dioxide-Selective Composite Membrane Containing a γ-CD-MOF Layer

Mixed matrix membranes (MMMs) for CO₂ separation have overcome the trade-off between gas permeability and gas selectivity to some extent. However, most MMMs still are prepared in lab- and pilot-scales since the permeability and selectivity of CO₂ are not good enough to reach the economically available requirements. Moreover, the fabrication of few MMMs with good separation performance is time-consuming or need harsh conditions. In this study, a novel MOF-based composite membrane (PAN-γ-CD-MOF-PU membrane) was successfully fabricated by a facile and fast spin-coating method. In the two-step coating process, we applied a uniform selective layer of γ-cyclodextrin-MOF (γ-CD-MOF) on porous polyacrylonitrile and then coated a layer of polyurethane on the γ-CD-MOF layer. The entire membrane formation process was about 30 s. The formation of a unique γ-CD-MOF layer greatly improved the separation ability of CO₂ (the CO₂ permeability is 70.97 barrers; the selectivity to CO₂/N₂ and CO₂/O₂ are 253.46 and 154.28, respectively). The gas separation performance can exceed the Robeson upper limit obviously and the selectivity is better than other MOF-based composite membranes. In addition, the PAN-γ-CD-MOF-PU membrane is strong and flexible. Therefore, the PAN-γ-CD-MOF-PU membrane developed in this study has great potential in large-scale industrial separation of CO₂.

Cyclodextrin Metal-Organic Frameworks and Their Applications

Cyclodextrin-based metal-organic frameworks (CD-MOFs), derived from γ-cyclodextrin (γ-CD) and alkali metal cations, constitute a class of porous, renewable, and edible MOFs that can be synthesized from a naturally occurring carbohydrate on a large scale. γ-CD is a C₈-symmetrical cyclic oligosaccharide composed of eight asymmetric α-1,4-linked d-glucopyranosyl residues that possesses a bucket-shaped cavity with an inner diameter of ∼1 nm and a depth of ∼0.8 nm. Upon combination of 1 equiv of γ-CD with 8 equiv of potassium hydroxide in an aqueous solution, followed by vapor diffusion of MeOH (or EtOH) into this solution during several days, CD-MOF-1 is obtained as cubic crystals. This carbohydrate-based MOF, which was discovered serendipitously in 2010, was the first highly crystalline CD-MOF to be obtained. X-ray crystallography of a single crystal reveals that it adopts the space group I432 with unit cell dimensions of approximately 31 × 31 × 31 ų. Other CD-MOFs, namely, CD-MOF-2 and CD-MOF-3, can be obtained when potassium ions are replaced by rubidium and cesium ions, respectively. CD-MOFs comprise extended body-centered frameworks of (γ-CD)₆ cubic units, which contain spherical pores that reside at the center of the cubes, interconnected by alkali metal cations, forming both cylindrical and triangular channels.During the past decade, CD-MOFs have emerged as a useful class of multifunctional materials based on porous frameworks with extended structures displaying robust crystallinity, permanent porosity, and excellent biocompatibility. The family of CD-MOFs has been joined by a growing collection of metal nodes involving alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺) and γ-CD as well as its derivatives. As a result of the ability of their extended porous frameworks to absorb guest molecules, including gases, drugs, metal-based nanoclusters, and nanoparticles, CD-MOFs have potential applications in areas as disparate as templating syntheses of metal-based nanoparticles and gels, adsorption and separation, trapping highly reactive intermediates, catalyst supports, sensing, electrical memory, and drug delivery.In this Account, we tell the story of CD-MOFs, a scientific discovery made in our research laboratory at Northwestern University, and the opportunities to use these environmentally friendly porous materials across different fields of science and technology. The story includes representative synthetic protocols for the preparation of CD-MOFs, along with an overview of their structural features, functionalization, and chemical modification aimed at increasing their stabilities in aqueous environments, and finally, a summary of their applications. The examples we will discuss, however, are only illustrative, and there is a significant body of additional findings emanating from our laboratory and others, especially in the realm of developing new synthetic strategies, tuning the framework stabilities, and exploring the guest inclusion and emergent properties of CD-MOFs. We refer readers to the original communications, papers, and reviews cited herein. We hope that, in the telling of the story of CD-MOFs, this Account may promote new scientific discoveries and further development of CD-MOF-based technologies in the future.

Introducing reticular chemistry into agrochemistry

For survival and quality of life, human society has sought more productive, precise, and sustainable agriculture. Agrochemistry, which solves farming issues in a chemical manner, is the core engine that drives the evolution of modern agriculture. To date, agrochemistry has utilized chemical technologies in the form of pesticides, fertilizers, veterinary drugs and various functional materials to meet fundamental demands from human society, while increasing the socio-ecological consequences due to inefficient use. Thus, more useful, precise, and designable scaffolding materials are required to support sustainable agrochemistry. Reticular chemistry, which weaves molecular units into frameworks, has been applied in many fields based on two cutting-edge porous framework materials, namely metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs). With flexibility in composition, structure, and pore chemistry, MOFs and COFs have shown increasing functionalities associated with agrochemistry in the last decade, potentially introducing reticular chemistry as a highly accessible chemical toolbox into agrochemical technologies. In this critical review, we will demonstrate how reticular chemistry shapes the future of agrochemistry in the fields of farm sensing, agro-ecological preservation and reutilization, agrochemical formulations, smart indoor farming, agrobiotechnology, and beyond.

Benign Integration of a Zn-Azolate Metal-Organic Framework onto Textile Fiber for Ammonia Capture

Ammonia (NH₃) exposure has a serious impact on human health because of its toxic and corrosive nature. Therefore, efficient personal protective equipment (PPE) such as masks is necessary to eliminate and mitigate NH₃ exposure risks. Because economically and environmentally viable conditions are of interest for large-scale manufacture of PPE, we herein report a benign procedure to synthesize a Zn-azolate metal-organic framework (MOF), MFU-4, for NH₃ capture. The surface area and morphology of MFU-4 obtained in alcohol solvents at room temperature is consistent with that of traditionally synthesized MFU-4 in N,N-dimethylformamide at 140 °C. In addition to its large NH₃ uptake capacity at 1 bar (17.7 mmol/g), MFU-4 shows outstanding performance in capturing NH₃ at low concentration (10.8 mmol/g at 0.05 bar). Furthermore, the mild synthetic conditions implemented make it facile to immobilize MFU-4 onto cotton textile fiber. Enhanced NH₃ capture ability of the MFU-4/fiber composite was also attributed to the well-exposed MOF particles. The benign synthetic MFU-4 procedure, high NH₃ uptake, and easy integration onto fiber pave the way toward implementation of similar materials in PPE.

Paeonol loaded cyclodextrin metal-organic framework particles for treatment of acute lung injury via inhalation

Administration of drugs via inhalation can overcome issues related to poor water solubility, low absorption or bioavailability associated with oral administration. In the current study we used γ-cyclodextrin metal organic frameworks (CD-MOFs) - of inhalable particle sizes, with cubic morphologies and favorable aerodynamic properties to achieve targeted pulmonary drug delivery via dry powder inhalers. The active natural compound, paeonol (PAE), was chosen as a model drug for treatment of acute lung injury (ALI). After loading of PAE into CD-MOF particles of inhalable sizes, PAE was rapidly released in phosphate buffer (pH = 7.4; 90% within 30 min) and in vivo experiments. After mixing with coarse and fine lactose (Inhalac®230: Inhalac®400: PAE-CD-MOF = 40:10:50, w/w/w), paeonol had a high fine particle fraction (FPF) (28.59%). Atom force microscopy was used to assess surface roughness and adhesive force. In vivo inhalation of PAE-CD-MOF dry powder inhaler by rat demonstrated rapid absorption (t_max of 4.0 min) and high absolute bioavailability (71%) of PAE, highlighting significant improvements in absorption and bioavailability of PAE when compared with oral administration (C_max and absolute bioavailability increased 6.5 and 9.3 folds, respectively). Results of in vivo experiments were consistent with cellular permeability studies (after loading into CD-MOF, the permeability of PAE improved about 5 folds in comparison to the pure PAE). Finally, the efficacy of inhaled PAE for ALI was validated by histopathological examination and via reduced levels of inflammatory factors observed in rat plasma. Overall, targeted pulmonary delivery of paeonol by inhaled PAE-CD-MOF particles appears to be promising method of delivery for treatment of ALI.

Recent progress in the synthesis, structural diversity and emerging applications of cyclodextrin-based metal-organic frameworks

Inorganic-organic hybrid materials, especially metal-organic frameworks (MOFs) composed of metals and organic linkers, have emerged as a new class of versatile materials owing to their tunable structure and controllable functionality. As typical biocompatible MOFs, cyclic oligosaccharide cyclodextrin-based carbohydrate metal-organic frameworks (CD-MOFs) have recently attracted considerable attention due to their edible, renewable and biodegradable nature. Herein, we focus on the latest advances concerning these materials. First, the synthesis methods and structural diversity of CD-MOFs are introduced and summarized. Besides, the synthetic strategies of moisture-resistant CD-MOFs are also emphasized. Moreover, their applications, including gas adsorption, separation, sensing, memristor fabrication, as templates in nanoparticle synthesis, light emission and especially drug delivery, are systematically discussed and highlighted. Finally, to conclude the review, some insights and current challenges that need to be addressed for the further development of these materials are proposed. We anticipate that this review will result in a better understanding of CD-MOFs and will help maximize the potential functions of these materials.

Alkane Shape- and Size-Recognized Selective Vapor Sorption in "Channel-Like" Crystals Based on Thiacalixarene Assemblies

Alkanes composed of C-C and C-H show a low electric polarization, and therefore, there is only very weak interaction between alkanes and adsorbents. Thus, it is difficult to separate a specific alkane from a mixture of alkanes by adsorption. Here, two activated "channel-like" crystals generated from brominated thiacalix[4]arene propyl ethers, which adopt 1,3-alternate and partial cone conformations, recognize specific alkane vapors depending on alkane-shape and -size, sorting in three-type alkane guests such as linear, branched, and cyclic alkanes. Two activated crystals, which are prepared by removal of solvent upon heating under reduced pressure, incorporate branched and/or cyclic alkane vapors by a unique "gate-opening" mechanism via a crystal transformation in the process. Linear alkane vapors do not trigger gate opening and are not taken up by the activated crystals. The shape and size molecular-recognition properties of the activated crystals promises considerable usefulness for the separation of linear, branched, and cyclic alkanes.

Crystal-to-Crystal Synthesis of Photocatalytic Metal-Organic Frameworks for Visible-Light Reductive Coupling and Mechanistic Investigations

Postmodification of reticular materials with well-defined catalysts is an appealing approach to produce new catalytic functional materials with improved stability and recyclability, but also to study catalysis in confined spaces. A promising strategy to this end is the postfunctionalization of crystalline and robust metal-organic frameworks (MOFs) to exploit the potential of crystal-to-crystal transformations for further characterization of the catalysts. In this regard, two new photocatalytic materials, MOF-520-PC1 and MOF-520-PC2, are straightforwardly obtained by the postfunctionalization of MOF-520 with perylene-3-carboxylic acid (PC1) and perylene-3-butyric acid (PC2). The single crystal-to-crystal transformation yielded the X-ray diffraction structure of catalytic MOF-520-PC2. The well-defined disposition of the perylenes inside the MOF served as suitable model systems to gain insights into the photophysical properties and mechanism by combining steady-state, time-resolved, and transient absorption spectroscopy. The resulting materials are active organophotoredox catalysts in the reductive dimerization of aromatic aldehydes, benzophenones, and imines under mild reaction conditions. Moreover, MOF-520-PC2 can be applied for synthesizing gram-scale quantities of products in continuous-flow conditions under steady-state light irradiation. This work provides an alternative approach for the construction of well-defined, metal-free, MOF-based catalysts.