Visible Light Driven Benzyl Alcohol Dehydrogenation in a Dye-Sensitized Photoelectrosynthesis Cell

Terpyridine Ni(II) Complex Grafted CdS Nanorods for Cooperative Selective Benzyl Alcohol Oxidation and Hydrogen Production

Efficient utilization of photogenerated charge carriers to realize photocatalytic solar fuel production and oxidative chemical synthesis is a challenging task. Herein, a conventional amidation reaction route is adopted to successfully construct a novel composite photocatalyst composed of a Ni(II)-terpyridine complex with carboxyl groups grafted on CdS nanorods (labeled as CdS@Ni(terpyC)2). Experimental results have unequivocally revealed that the as-fabricated composite catalyst exhibited a remarkable enhancement in photocatalytic activity for the dehydrogenation of benzyl alcohol under visible light, demonstrating superior hydrogen evolution efficiency and benzaldehyde selectivity, surpassing both pristine CdS and the blend of CdS and Ni(terpyC)2. The carrier dynamics study demonstrated that the Ni(terpyC)2 on the surface of CdS could quickly extract the photogenerated electrons of CdS, which reduced the carrier recombination efficiency, further improving the photocatalytic activity of the catalyst. This work illustrates the effect of surface active site engineering on photocatalysis and is expected to shed substantial inspiration on future surface modulation and design of semiconductor photocatalysts.

Regulating Chlorine and Hydrogen Atom Transfer for Selective Photoelectrochemical C─C Coupling by Cu-coordination Effect at Semiconductor/Electrolyte Interfaces

Semiconductor-based photoelectrochemical (PEC) organic transformations usually show radical characteristics, in which the reaction selectivity is often difficult to precisely control due to the nonselectivity of radicals. Accordingly, several simple organic reactions (e.g., oxidations of alcohols, aldehydes, and other small molecules) have been widely studied, while more complicated processes like C─C coupling remain challenging. Herein, a synergistic heterogeneous/homogeneous PEC strategy is developed to achieve a controllable radical-induced C─C coupling reaction mediated by the copper-coordination effect at the semiconductor/electrolyte interfaces, which additionally exerts a significant impact on the product regioselectivity. Through experimental studies and theoretical simulations, this study reveals that the copper-chloride complex effectively regulates the formation of chloride radicals, a typical hydrogen atom transfer agent, on semiconductor surfaces and stabilizes the heterogeneous interfaces by suppressing the radical-induced surface passivation. Taking the Minisci reaction (the coupling between 2-phenylquinoline and cyclohexane) as a model, the yield of the target C─C coupling product reaches up to 90% on TiO2 photoanodes with a selectivity of 95% and long-term stability over 100 h. Moreover, such a strategy exhibits a broad scope and can be used for the functionalization of various heteroaromatic hydrocarbons.

Highly Efficient Photoelectrochemical Alkene Epoxidation on a Dye-Sensitized Photoanode

In photoelectrochemical (PEC) cells, selective oxidation of organic substrates coupled with hydrogen evolution represents a promising approach for value-added chemical production and solar energy conversion. In this study, we report on PEC epoxidation of alkenes at a ruthenium dye-sensitized photoanode in a CH3CN/H2O mixed solvent with LiBr as a mediator and water as the oxygen source. The dye-sensitized photoanode was found to exhibit significant advantages in the simultaneous improvement of charge separation and suppression of charge recombination. First, LiBr as a redox mediator plays a critical role in charge separation, leading to an excellent excited electron injection efficiency of 95% and a high dye regeneration efficiency of 87%. Second, the predominant charge recombination pathway on the dye-sensitized photoanode is efficiently blocked by the reaction between alkene and the in situ generated bromine oxidant. As a result, the current system achieved a remarkable photocurrent density of over 4 mA cm-2 with a record-high incident photo-to-current efficiency (IPCE) of 51% and extraordinary selectivity of up to 99% for the epoxidation of a wide range of alkenes. Meanwhile, nearly 100% Faradaic efficiency for hydrogen evolution was obtained. The performance shown here exceeds that obtained by metal oxide-based semiconductor photoanodes under comparable conditions, demonstrating the great potential of dye-sensitized photoelectrodes for organic synthesis owing to their diversity and tunability.

Organic Upgrading through Photoelectrochemical Reactions: Toward Higher Profits

Aqueous photoelectrochemical (PEC) cells have long been considered a promising technology to convert solar energy into hydrogen. However, the solar-to-H2 (STH) efficiency and cost-effectiveness of PEC water splitting are significantly limited by sluggish oxygen evolution reaction (OER) kinetics and the low economic value of the produced O2 , hindering the practical commercialization of PEC cells. Recently, organic upgrading PEC reactions, especially for alternative OERs, have received tremendous attention, which improves not only the STH efficiency but also the economic effectiveness of the overall reaction. In this review, PEC reaction fundamentals and reactant-product cost analysis of organic upgrading reactions are briefly reviewed, recent advances made in organic upgrading reactions, which are categorized by their reactant substrates, such as methanol, ethanol, glycol, glycerol, and complex hydrocarbons, are then summarized and discussed. Finally, the current status, further outlooks, and challenges toward industrial applications are discussed.

Metal Complexes for Dye-Sensitized Photoelectrochemical Cells (DSPECs)

Since Mallouk's earliest contribution, dye-sensitized photoelectrochemical cells (DSPECs) have emerged as a promising class of photoelectrochemical devices capable of storing solar light into chemical bonds. This review primarily focuses on metal complexes outlining stabilization strategies and applications. The ubiquity and safety of water have made its splitting an extensively studied reaction; here, we present some examples from the outset to recent advancements. Additionally, alternative oxidative pathways like HX splitting and organic reactions mediated by a redox shuttle are discussed.

Al2 O3 -coated BiVO4 Photoanodes for Photoelectrocatalytic Regioselective C-H Activation of Aromatic Amines

Photoelectrochemistry is becoming an innovative approach to organic synthesis. Generally, the current photoelectrocatalytic organic transformations suffer from limited reaction type, low conversion efficiency and poor stability. Herein, we develop efficient and stable photoelectrode materials using metal oxide protective layer, with a focus on achieving regioselective activation of amine compounds. Notably, our photoelectrochemistry process is implemented under mild reaction conditions and does not involve any directing groups, transition metals or oxidants. The results demonstrate that beyond photocatalysis and electrocatalysis, photoelectrocatalysis exhibits high efficiency, remarkable repeatability and good functional group tolerance, highlighting its great potential for applications.

A breath of sunshine: oxygenic photosynthesis by functional molecular architectures

The conversion of light into chemical energy is the game-changer enabling technology for the energetic transition to renewable and clean solar fuels. The photochemistry of interest includes the overall reductive/oxidative splitting of water into hydrogen and oxygen and alternatives based on the reductive conversion of carbon dioxide or nitrogen, as primary sources of energy-rich products. Devices capable of performing such transformations are based on the integration of three sequential core functions: light absorption, photo-induced charge separation, and the photo-activated breaking/making of molecular bonds via specific catalytic routes. The key to success does not rely simply on the individual components' performance, but on their optimized integration in terms of type, number, geometry, spacing, and linkers dictating the photosynthetic architecture. Natural photosynthesis has evolved along this concept, by integrating each functional component in one specialized "body" (from the Greek word "soma") to enable the conversion of light quanta with high efficiency. Therefore, the natural "quantasome" represents the key paradigm to inspire man-made constructs for artificial photosynthesis. The case study presented in this perspective article deals with the design of artificial photosynthetic systems for water oxidation and oxygen production, engineered as molecular architectures then rendered on electrodic surfaces. Water oxidation to oxygen is indeed the pervasive oxidative reaction used by photosynthetic organisms, as the source of reducing equivalents (electrons and protons) to be delivered for the processing of high-energy products. Considering the vast and abundant supply of water (including seawater) as a renewable source on our planet, this is also a very appealing option for photosynthetic energy devices. We will showcase the progress in the last 15 years (2009-2023) in the strategies for integrating functional building blocks as molecular photosensitizers, multi-redox water oxidation catalysts and semiconductor materials, highlighting how additional components such as redox mediators, hydrophilic/hydrophobic pendants, and protective layers can impact on the overall photosynthetic performance. Emerging directions consider the modular tuning of the multi-component device, in order to target a diversity of photocatalytic oxidations, expanding the scope of the primary electron and proton sources while enhancing the added-value of the oxidation product beyond oxygen: the selective photooxidation of organics combines the green chemistry vision with renewable energy schemes and is expected to explode in coming years.

Photoelectrochemical approaches for the conversion of lignin at room temperature

The selective cleavage of C-C/C-O linkages represents a key step toward achieving the chemical conversion of biomass to targeted value-added chemical products under ambient conditions. Using photoelectrosynthetic solar cells is a promising method to address the energy intensive depolymerization of lignin for the production of biofuels and valuable chemicals. This feature article gives an in-depth overview of recent progress using dye-sensitized photoelectrosynthetic solar cells (DSPECs) to initiate the cleavage of C-C/C-O bonds in lignin and related model compounds. This approach takes advantage of N-oxyl mediated catalysis in organic electrolytes and presents a promising direction for the sustainable production of chemicals currently derived from fossil fuels.

Beyond Water Oxidation: Hybrid, Molecular-Based Photoanodes for the Production of Value-Added Organics

The political and environmental problems related to the massive use of fossil fuels prompted researchers to develop alternative strategies to obtain green and renewable fuels such as hydrogen. The light-driven water splitting process (i.e., the photochemical decomposition of water into hydrogen and oxygen) is one of the most investigated strategies to achieve this goal. However, the water oxidation reaction still constitutes a formidable challenge because of its kinetic and thermodynamic requirements. Recent research efforts have been focused on the exploration of alternative and more favorable oxidation processes, such as the oxidation of organic substrates, to obtain value-added products in addition to solar fuels. In this mini-review, some of the most intriguing and recent results are presented. In particular, attention is directed on hybrid photoanodes comprising molecular light-absorbing moieties (sensitizers) and catalysts grafted onto either mesoporous semiconductors or conductors. Such systems have been exploited so far for the photoelectrochemical oxidation of alcohols to aldehydes in the presence of suitable co-catalysts. Challenges and future perspectives are also briefly discussed, with special focus on the application of such hybrid molecular-based systems to more challenging reactions, such as the activation of C–H bonds.

Enhanced Photocatalytic Alcohol Oxidation at the Interface of RuC-Coated TiO2 Nanorod Arrays

Visible-light-driven organic oxidations carried out under mild conditions offer a sustainable approach to performing chemical transformations important to the chemical industry. This work reports an efficient photocatalytic benzyl alcohol oxidation process using one-dimensional (1D) TiO2 nanorod (NR)-based photoanodes with surface-adsorbed ruthenium polypyridyl photocatalysts at room temperature. The photocatalyst bis(2,2'-bipyridine)(4,4'-dicarboxy-2,2'-bipyridine)Ru(II) (RuC) was covalently anchored onto TiO2 nanorod arrays grown on fluorine-doped tin oxide (FTO) electrode surfaces (FTO|t-TiO2|RuC, t = the thickness of TiO2 NR). Under aerobic conditions, the photophysical and photocatalytic properties of FTO|t-TiO2|RuC (t = 1, 2, or 3.5 μm) photoanodes were investigated in a solution containing a hydrogen atom transfer mediator (4-acetamido-2,2,6,6-tetramethylpiperidine-N-oxyl, ACT) as cocatalyst. Dye-sensitized photoelectrochemical cells (DSPECs) using the FTO|t-TiO2|RuC (t = 1, 2, or 3.5 μm) photoanodes and ACT-containing electrolyte were investigated for carrying out photocatalytic oxidation of a lignin model compound containing a benzylic alcohol functional group. The best-performing anode surface, FTO|1-TiO2|RuC (shortest NR length), oxidized the 2° alcohol of the lignin model compound to the Cα-ketone form with a > 99% yield over a 4 h photocatalytic experiment with a Faradaic efficiency of 88%. The length of TiO2 NR arrays (TiO2 NRAs) on the FTO substrate influenced the photocatalytic performance with longer NRAs underperforming compared to the shorter arrays. The influence of the NR length is hypothesized to affect the homogeneity of the RuC coating and accessibility of the ACT mediator to the RuC-coated TiO2 surface. The efficient photocatalytic alcohol oxidation with visible light at room temperature as demonstrated in this study is important to the development of sustainable approaches for lignin depolymerization and biomass conversion.

Technological Innovations in Photochemistry for Organic Synthesis: Flow Chemistry, High-Throughput Experimentation, Scale-up, and Photoelectrochemistry

Photoinduced chemical transformations have received in recent years a tremendous amount of attention, providing a plethora of opportunities to synthetic organic chemists. However, performing a photochemical transformation can be quite a challenge because of various issues related to the delivery of photons. These challenges have barred the widespread adoption of photochemical steps in the chemical industry. However, in the past decade, several technological innovations have led to more reproducible, selective, and scalable photoinduced reactions. Herein, we provide a comprehensive overview of these exciting technological advances, including flow chemistry, high-throughput experimentation, reactor design and scale-up, and the combination of photo- and electro-chemistry.

Dye-sensitized solar cells strike back

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

Artificial photosynthesis: photoanodes based on polyquinoid dyes onto mesoporous tin oxide surface

Dye-sensitized photoelectrochemical cells represent an appealing solution for artificial photosynthesis, aimed at the conversion of solar light into fuels or commodity chemicals. Extensive efforts have been directed towards the development of photoelectrodes combining semiconductor materials and organic dyes; the use of molecular components allows to tune the absorption and redox properties of the material. Recently, we have reported the use of a class of pentacyclic quinoid organic dyes (KuQuinone) chemisorbed onto semiconducting tin oxide as photoanodes for water oxidation. In this work, we investigate the effect of the SnO₂ semiconductor thickness and morphology and of the dye-anchoring group on the photoelectrochemical performance of the electrodes. The optimized materials are mesoporous SnO₂ layers with 2.5 μm film thickness combined with a KuQuinone dye with a 3-carboxylpropyl-anchoring chain: these electrodes achieve light-harvesting efficiency of 93% at the maximum absorption wavelength of 533 nm, and photocurrent density J up to 350 μA/cm² in the photoelectrochemical oxidation of ascorbate, although with a limited incident photon-to-current efficiency of 0.075%. Calculations based on the density functional theory (DFT) support the role of the reduced species of the KuQuinone dye via a proton-coupled electron transfer as the competent species involved in the electron transfer to the tin oxide semiconductor. Finally, a preliminary investigation of the photoelectrodes towards benzyl alcohol oxidation is presented, achieving photocurrent density up to 90 μA/cm² in acetonitrile in the presence of N-hydroxysuccinimide and pyridine as redox mediator and base, respectively. These results support the possibility of using molecular-based materials in synthetic photoelectrochemistry.

Molecular Triad Containing a TEMPO Catalyst Grafted on Mesoporous Indium Tin Oxide as a Photoelectrocatalytic Anode for Visible Light-Driven Alcohol Oxidation

Photoelectrochemical cells based on semiconductors are among the most studied methods of artificial photosynthesis. This study concerns the immobilization, on a mesoporous conducting indium tin oxide electrode (nano-ITO), of a molecular triad (NDADI-P-Ru-TEMPO) composed of a ruthenium tris-bipyridine complex (Ru) as photosensitizer, connected at one end to 2,2,6,6-tetramethyl-1-piperidine N-oxyl (TEMPO) as alcohol oxidation catalyst and at the other end to the electron acceptor naphthalenedicarboxyanhydride dicarboximide (NDADI). Light irradiation of NDADI-P-Ru-TEMPO grafted to nano-ITO in a pH 10 carbonate buffer effects selective oxidation of para-methoxybenzyl alcohol (MeO-BA) to para-methoxybenzaldehyde with a TON of approximately 150 after 1 h of photolysis at a bias of 0.4 V vs. SCE. The faradaic efficiency is found to be of 80±5 %. The photophysical study indicates that photoinduced electron transfer from the Ru complex to NDADI is a slow process and must compete with direct electron injection into ITO to have a better performing system. This work sheds light on some of the important ways to design more efficient molecular systems for the preparation of photoelectrocatalytic cells based on catalyst-dye-acceptor arrays immobilized on conducting electrodes.

Research Progress in Organic Synthesis by Means of Photoelectrocatalysis

The rapid development of radical chemistry has spurred several innovative strategies for organic synthesis. The novel approaches for organic synthesis play a critical role in promoting and regulating the single-electron redox activity. Among them, photoelectrocatalysis (PEC) has attained considerable attention as the most promising strategy to convert organic compounds into fine chemicals. This review highlights the current progress in organic synthesis through PEC, including various catalytic reactions, catalyst systems and practical applications. The numerous catalytic reactions suffer the high overpotential and poor conversion efficiency, depending on the design of electrolyzers and the reaction mechanisms. We also considered the recent developments with special emphasis on scientific problems and efficient solutions, which enhance accessibility to utilize and further develop the photoelectrocatalytic technology for the specific chemical bonds formation and the fabrication of numerous catalytic systems.

The catalytic dehydrogenation of ethanol by heterogeneous catalysts

In this review, recent advances in the catalytic dehydrogenation of ethanol to acetaldehytde with the release of hydrogen catalyzed by a heterogeneous catalyst aresummerized and discussed.

Polyoxometalates acting as a hole-transfer mediator and crystallization accelerant in a perovskite photoanode for the photoelectrocatalytic oxidation of benzene into phenol

Organic metal halide perovskite (OMHP) material shows promising applications in the photoelectrocatalytic field, but its efficiencies are unsatisfactory due to the bulk and surface carrier recombination. In this work, we used dual polyoxometalates (C₄H₉N)₃PW₁₂O₄₀ and [Ag₁₀[{Co(H₂O)₃}₂{CoBi₂W₁₉O₆₆(OH)₄}] to modify the OMHP photoanode; the former acted to improve the quality of the perovskite film and the latter could facilitate hole transfer. Such dual modifications effectively reduce carrier recombination and thus obviously boost photoelectrocatalytic efficiency. Hence, we explored the photoelectrocatalytic oxidation of benzene into phenol in aqueous solution by using the modified OMHP photoanode. The yield of phenol in the reaction using the modified OMHP photoanode reached about 31.8%, which was obviously superior to that using the pure OMHP photoanode. Furthermore, we carried out radical scavenger studies to investigate the active species involved in the photoelectrocatalytic benzene oxidation reaction, and thus proposed the plausible mechanism of the photoelectrocatalytic oxidation of benzene into phenol over the OMHP photoanode. These results provide new insights into the development of high performance OMHP photoanodes for photoelectrocatalytic organic transformation.

Electron-Withdrawing Boron Dipyrromethene Dyes As Visible Light Absorber/Sensitizers on Semiconductor Oxide Surfaces

The synthesis, characterization, and electrochemical and photophysical properties of the phosphonate-derivatized carbazole (CBZ) and boron dipyrromethene (BODIPY) chromophores in the dyes, BODIPY(CBZ)₂PO₃H₂ (8) and BODIPY(Tol)₂PO₃H₂ (7), are described. The oxide-bound dyes have been explored as light absorbers in dye-sensitized photoelectrosynthesis cell (DSPEC) applications. The BODIPY-CBZ phosphonate ester (6) features a broad, intense UV-visible absorption spectrum with absorptions at 297 and 650 nm that arise from mixed transitions at the CBZ and BODIPY units. Electrochemical measurements on BODIPY(CBZ)₂Br (4) in 0.1 M [nBu₄N][PF₆] in dichloromethane, vs normal hydrogen electrode (NHE), reveal reversible oxidations at 1.19 and 1.41 V and a reversible reduction at -0.59 V. On indium tin oxide (ITO) and TiO₂, a reversible one-electron oxidation appears for 7 at 0.86 and 0.90 V vs NHE in dichloromethane, respectively, which demonstrates the redox stability on metal oxide surfaces. The results of nanosecond transient absorption measurements on SnO₂/TiO₂ electrodes provide direct evidence for excited-state electron injection into the conduction band of TiO₂ following 590 nm excitation. A longer lifetime for 8⁺ compared to 7⁺ is consistent with extensive intramolecular charge separation between the CBZ and BODIPY units on the surface. Photoelectrochemical studies on 8 on a SnO₂/TiO₂ photoanode resulted in sustained photocurrents with current maxima of ∼200 μA/cm² with hydroquinone added as a reductant under 1 sun (AM1.5 100 mW·cm^-2) illumination at pH 4.5 in 0.1 M acetate buffer and 0.4 M LiClO₄. On mixed SnO₂/TiO₂ electrode surfaces, with the added catalyst [Ru(Mebimpy)((4,4'-(OH)₂PO-CH₂)₂bpy)(OH₂)]²⁺ and chromophores 7 and 8, addition of 0.1 M benzyl alcohol resulted in sustained photocurrents of 12 and 35 μA/cm², consistent with oxidation to benzaldehyde.

Visible Light-Driven Cascade Carbon-Carbon Bond Scission for Organic Transformations and Plastics Recycling

Significant efforts are devoted to developing artificial photosynthetic systems to produce fuels and chemicals in order to cope with the exacerbating energy and environmental crises in the world now. Nonetheless, the large-scale reactions that are the focus of the artificial photosynthesis community, such as water splitting, are thus far not economically viable, owing to the existing, cheaper alternatives to the gaseous hydrogen and oxygen products. As a potential substitute for water oxidation, here, a unique, visible light-driven oxygenation of carbon-carbon bonds for the selective transformation of 32 unactivated alcohols, mediated by a vanadium photocatalyst under ambient, atmospheric conditions is presented. Furthermore, since the initial alcohol products remain as substrates, an unprecedented photodriven cascade carbon-carbon bond cleavage of macromolecules can be performed. Accordingly, hydroxyl-terminated polymers such as polyethylene glycol, its block co-polymer with polycaprolactone, and even the non-biodegradable polyethylene can be repurposed into fuels and chemical feedstocks, such as formic acid and methyl formate. Thus, a distinctive approach is presented to integrate the benefits of photoredox catalysis into environmental remediation and artificial photosynthesis.

Nonsiliceous Mesoporous Materials: Design and Applications in Energy Conversion and Storage

In this work, the progress in the design of nonsiliceous mesoporous materials (nonSiMPMs) over the last five years from the perspectives of the chemical composition, morphology, loading, and surface modification is summarized. Carbon, metal, and metal oxide are in focus, which are the most promising compositions. Then, representative applications of nonSiMPMs are demonstrated in energy conversion and storage, including recent technical advances in dye-sensitized solar cells, perovskite solar cells, photocatalysts, electrocatalysts, fuel cells, storage batteries, supercapacitors, and hydrogen storage systems. Finally, the requirements and challenges of the design and application of nonSiMPMs are outlined.

Unusually Slow Internal Conversion in N-Heterocyclic Carbene/Carbanion Cyclometallated Ru(II) Complexes: A Hammett Relationship

A series of six [Ru(bpy)₂(NHC-R)]⁺ complexes were synthesized and characterized, where bpy = 2,2'-bipyridine and NHC-R is an N-heterocyclic carbene covalently linked to a carbanion with a number of substituents, R = -OMe (1), -Me (2), -H (3), -Cl (4), -CO₂Et (5), and -NO₂ (6). The effects of these strongly σ-donating NHC-R ligands on the ground-state electronic structure and on the excited-state character and dynamics were probed using electrochemistry, TD-DFT calculations, and steady-state absorption and emission spectroscopies, along with ultrafast transient absorption and time-resolved IR measurements. The excitation of 1-5 with a 400 nm pulse (irf = 85 fs) results in the population of a high energy singlet state, S_n, that rapidly intersystem crosses into a high-lying triplet state, T_n. Over the course of 7-22 ps, T_n relaxes to the lowest lying triplet state, T₁, which is metal/ligand-to-ligand charge transfer, ³Ru(d)/NHC(π) → bpy(π*) in character. These ³ML-LCT states decay to regenerate the ground state with lifetimes, τ, that range from <8 to 15 ns at 298 K and from 10 to 23 ns at 77 K in CH₃CN. Both the excited-state lifetime at 77 K and the T_n → T₁ rate of internal conversion of 1-5 are dependent on the substituent R, and the latter correlates with the Hammett parameter (σ⁺_p) of the NHC-R ligand. Excitation of 1-5 with low energy light, 550-670 nm, does not result in the population of T_n, as only T₁ is observed. In the case of 6, excitation is expected to populate a ¹Ru(d)/NHC(π) → NHC(π*) state localized on the NHC-NO₂ ligand, which decays to a higher energy ³Ru(d)/NHC(π) → NHC(π*) state followed by internal conversion to the ³Ru(d)/NHC(π) → bpy(π*) T₁ state with τ = 250 ps; the population of both states is independent of excitation wavelength in 6. This work demonstrates that the introduction of one NHC-R ligand in these complexes permits the population of a higher energy triplet state that decays to T₁ in the picosecond time range. The relatively slow T_n → T₁ internal conversion in these complexes makes  the population of the higher-energy state potentially useful for more efficient charge injection into semiconductors for solar energy conversion or to aid in accessing dissociative metal-centered states for drug delivery. Overall, this work shows the ability to synthetically access valuable excited-state dynamics using the two different Ru-C bonds of the asymmetric NHC-R ligands.

Effects of a strong π-accepting ancillary ligand on the water oxidation activity of weakly coupled binuclear ruthenium catalysts

Significant differences were found in the proton-coupled redox chemistry and catalytic behavior of the binuclear [{Ru(H2O)(bpz)}2(tpy2ph)](PF6)4 complex [bpz = 2,2'-bipyrazine; tpy2ph = 1,3-bis(4'-2,2':6',2''-terpyridin-4-yl)benzene] as compared with the structurally analogous derivative with 2,2'-bipyridine (bpy) instead of bpz. The differences were assigned to the stronger π-accepting character of bpz relative to bpy as the ancillary ligand. The expectation of a positive shift for the Ru-centered redox potentials was confirmed for the lower oxidation state species, but that trend was reversed in the formation of the high-valence catalytic active species as shown by a negative shift of 0.14 V for the potential of the [RuIV/V[double bond, length as m-dash]O] process. Moreover, DFT calculations indicated a significant decrease of about 15% on the spin density and oxyl character of the [RuV[double bond, length as m-dash]O]3+ fragment. The significantly lower kcat(O2) for the bpz system was attributed to these combined electronic effects.

Photoelectrochemical cell for P–H/C–H cross-coupling with hydrogen evolution

A photoelectrochemical cell is able to save nearly 90% external bias input to realize activation of P–H/C–H bonds for cross-coupling hydrogen evolution as compared with an electrochemical cell.

Core-shell structured titanium dioxide nanomaterials for solar energy utilization

Because of its unmatched resource potential, solar energy utilization currently is one of the hottest research areas. Much effort has been devoted to developing advanced materials for converting solar energy into electricity, solar fuels, active chemicals, or heat. Among them, TiO2 nanomaterials have attracted much attention due to their unique properties such as low cost, nontoxicity, good stability and excellent optical and electrical properties. Great progress has been made, but research opportunities are still present for creating new nanostructured TiO2 materials. Core-shell structured nanomaterials are of great interest as they provide a platform to integrate multiple components into a functional system, showing improved or new physical and chemical properties, which are unavailable from the isolated components. Consequently, significant effort is underway to design, fabricate and evaluate core-shell structured TiO2 nanomaterials for solar energy utilization to overcome the remaining challenges, for example, insufficient light absorption and low quantum efficiency. This review strives to provide a comprehensive overview of major advances in the synthesis of core-shell structured TiO2 nanomaterials for solar energy utilization. This review starts from the general protocols to construct core-shell structured TiO2 nanomaterials, and then discusses their applications in photocatalysis, water splitting, photocatalytic CO2 reduction, solar cells and photothermal conversion. Finally, we conclude with an outlook section to offer some insights on the future directions and prospects of core-shell structured TiO2 nanomaterials and solar energy conversion.

Fundamental Factors Impacting the Stability of Phosphonate-Derivatized Ruthenium Polypyridyl Sensitizers Adsorbed on Metal Oxide Surfaces

A series of 18 ruthenium(II) polypyridyl complexes were synthesized and evaluated under electrochemically oxidative conditions, which generates the Ru(III) oxidation state and mimics the harsh conditions experienced during the kinetically limited regime that can occur in dye-sensitized solar cells (DSSCs) and dye-sensitized photo-electrosynthesis cells, to further develop fundamental insights into the factors governing molecular sensitizer surface stability in aqueous 0.1 M HClO₄. Both desorption and oxidatively induced ligand substitution were observed on planar fluorine-doped tin oxide (FTO) electrodes, with a dependence on the E_1/2 Ru(III/II) redox potential dictating the comparative ratios of the processes. Complexes such as RuP4OMe ( E_1/2 = 0.91 vs Ag/AgCl) displayed virtually only desorption, while complexes such as RuPbpz ( E_1/2 > 1.62 V vs Ag/AgCl) displayed only chemical decomposition. Comparing isomers of 4,4'- and 5,5'-disubstituted-2,2'-bipyridine ancillary ligands, a dramatic increase in the rate of desorption of the Ru(III) complexes was observed for the 5,5'-ligands. Nanoscopic indium-doped tin oxide thin films (nanoITO) were also sensitized and analyzed with cyclic voltammetry, UV-vis absorption spectroscopy, and X-ray photoelectron spectroscopy, allowing for further distinction of desorption versus ligand-substitution processes. Desorption loss to bulk solution associated with the planar surface of FTO is essentially non-existent on nanoITO, where both desorption and ligand substitution are shut down with RuP4OMe. These results revealed that minimizing time spent in the oxidized form, incorporating electron-donating groups, maximizing hydrophobicity, and minimizing molecular bulk near the adsorbed ligand are critical to optimizing the performance of ruthenium(II) polypyridyl complexes in dye-sensitized devices.

Production of solar chemicals: gaining selectivity with hybrid molecule/semiconductor assemblies

Research on the production of solar fuels and chemicals has rocketed over the past decade, with a wide variety of systems proposed to harvest solar energy and drive chemical reactions. In this Feature Article we have focused on hybrid molecule/semiconductor assemblies in both powder and supported materials, summarising recent systems and highlighting the enormous possibilities offered by such assemblies to carry out highly demanding chemical reactions with industrial impact. Of relevance is the higher selectivity obtained in visible light-driven organic transformations when using molecular catalysts compared to photocatalytic materials.

Inner Layer Control of Performance in a Dye-Sensitized Photoelectrosynthesis Cell

Interfacial charge transfer and core-shell structures play important roles in dye-sensitized photoelectrosynthesis cells (DSPEC) for water splitting into H₂ and O₂. An important element in the design of the photoanode in these devices is a core/shell structure which controls local electron transfer dynamics. Here, we introduce a new element, an internal layer of Al₂O₃ lying between the Sb:SnO₂/TiO₂ layers in a core/shell electrode which can improve photocurrents by up to 300%. In these structures, the results of photocurrent, transient absorption, and linear scan voltammetry measurements point to an important role for the Al₂O₃ layer in controlling internal electron transfer within the core/shell structure.

Photoelectrochemical oxidation of organic substrates in organic media

There is a global effort to convert sunlight into fuels by photoelectrochemically splitting water to form hydrogen fuels, but the dioxygen byproduct bears little economic value. This raises the important question of whether higher value commodities can be produced instead of dioxygen. We report here photoelectrochemistry at a BiVO₄ photoanode involving the oxidation of substrates in organic media. The use of MeCN instead of water enables a broader set of chemical transformations to be performed (e.g., alcohol oxidation and C-H activation/oxidation), while suppressing photocorrosion of BiVO₄ that otherwise occurs readily in water, and sunlight reduces the electrical energy required to drive organic transformations by 60%. These collective results demonstrate the utility of using photoelectrochemical cells to mediate organic transformations that otherwise require expensive and toxic reagents or catalysts.Photoelectrochemical water splitting is a promising method for H₂ fuel production, but the O₂ by-product generated has little economic value. Here, Berlinguette and colleagues demonstrate that BiVO₄ photoanodes immersed in organic media can instead perform valuable alcohol oxidation and C-H functionalization reactions.

Synthesis and characterization of titanium(iv)/graphene oxide foam: a sustainable catalyst for the oxidation of benzyl alcohol to benzaldehyde

A sustainable catalyst for the selective oxidation of benzyl alcohol (BnOH) to benzaldehyde (BzH) was developed by mineralizing Ti(SO₄)₂ on graphene oxide foam (GOF) surface.

Thermodynamic Hydricity of Transition Metal Hydrides

Transition metal hydrides play a critical role in stoichiometric and catalytic transformations. Knowledge of free energies for cleaving metal hydride bonds enables the prediction of chemical reactivity, such as for the bond-forming and bond-breaking events that occur in a catalytic reaction. Thermodynamic hydricity is the free energy required to cleave an M-H bond to generate a hydride ion (H(-)). Three primary methods have been developed for hydricity determination: the hydride transfer method establishes hydride transfer equilibrium with a hydride donor/acceptor pair of known hydricity, the H2 heterolysis method involves measuring the equilibrium of heterolytic cleavage of H2 in the presence of a base, and the potential-pKa method considers stepwise transfer of a proton and two electrons to give a net hydride transfer. Using these methods, over 100 thermodynamic hydricity values for transition metal hydrides have been determined in acetonitrile or water. In acetonitrile, the hydricity of metal hydrides spans a range of more than 50 kcal/mol. Methods for using hydricity values to predict chemical reactivity are also discussed, including organic transformations, the reduction of CO2, and the production and oxidation of hydrogen.

Solar-Driven Reduction of Aqueous Protons Coupled to Selective Alcohol Oxidation with a Carbon Nitride-Molecular Ni Catalyst System

Solar water-splitting represents an important strategy toward production of the storable and renewable fuel hydrogen. The water oxidation half-reaction typically proceeds with poor efficiency and produces the unprofitable and often damaging product, O2. Herein, we demonstrate an alternative approach and couple solar H2 generation with value-added organic substrate oxidation. Solar irradiation of a cyanamide surface-functionalized melon-type carbon nitride ((NCN)CNx) and a molecular nickel(II) bis(diphosphine) H2-evolution catalyst (NiP) enabled the production of H2 with concomitant selective oxidation of benzylic alcohols to aldehydes in high yield under purely aqueous conditions, at room temperature and ambient pressure. This one-pot system maintained its activity over 24 h, generating products in 1:1 stoichiometry, separated in the gas and solution phases. The (NCN)CNx-NiP system showed an activity of 763 μmol (g CNx)(-1) h(-1) toward H2 and aldehyde production, a Ni-based turnover frequency of 76 h(-1), and an external quantum efficiency of 15% (λ = 360 ± 10 nm). This precious metal-free and nontoxic photocatalytic system displays better performance than an analogous system containing platinum instead of NiP. Transient absorption spectroscopy revealed that the photoactivity of (NCN)CNx is due to efficient substrate oxidation of the material, which outweighs possible charge recombination compared to the nonfunctionalized melon-type carbon nitride. Photoexcited (NCN)CNx in the presence of an organic substrate can accumulate ultralong-lived "trapped electrons", which allow for fuel generation in the dark. The artificial photosynthetic system thereby catalyzes a closed redox cycle showing 100% atom economy and generates two value-added products, a solar chemical, and solar fuel.

Visible-light-driven selective oxidation of benzyl alcohol and thioanisole by molecular ruthenium catalyst modified hematite

Molecular ruthenium catalysts were found to selectively catalyze the oxidation of thioanisole to sulfoxide with a yield up to 100% in the presence of visible light and sacrificial reagents when they were anchored onto hematite powder. The composite photocatalysts also showed about 5 times higher efficiencies in benzyl alcohol oxidation than the system composed of dispersed molecular catalysts and hematite particles in aqueous solution. A photoelectrochemical cell based on a molecular catalyst modified hematite photoanode was further fabricated, which exhibited high activity towards the oxidation of organic substrates.

Efficient Light-Driven Oxidation of Alcohols Using an Organic Chromophore-Catalyst Assembly Anchored to TiO2

The ligand 5-PO3H2-2,2':5',2″-terthiophene-5-trpy, T3 (trpy = 2,2':6',2″-terpyridine), was prepared and studied in aqueous solutions along with its metal complex assembly [Ru(T3)(bpy)(OH2)](2+) (T3-Ru-OH2, bpy = 2,2'-bipyridine). T3 contains a phosphonic acid group for anchoring to a TiO2 photoanode under aqueous conditions, a terthiophene fragment for light absorption and electron injection into TiO2, and a terminal trpy ligand for the construction of assemblies comprising a molecular oxidation catalyst. At a TiO2 photoanode, T3 displays efficient injection at pH 4.35 as evidenced by the high photocurrents (∼350 uA/cm(2)) arising from hydroquinone oxidation. Addition of [Ru(bpy)(OTf)][OTf]2 (bpy = 2,2'-bipyridine, OTf(-) = triflate) to T3 at the free trpy ligand forms the molecular assembly, T3-Ru-OH2, with the oxidative catalyst fragment: [Ru(trpy)(bpy)(OH2)](2+). The new assembly, T3-Ru-OH2, was used to perform efficient light-driven oxidation of phenol (230 μA/cm(2)) and benzyl alcohol (25 μA/cm(2)) in a dye-sensitized photoelectrosynthesis cell.