Improved Understanding of the Electronic and Energetic Landscapes of Perovskite Solar Cells: High Local Charge Carrier Mobility, Reduced Recombination, and Extremely Shallow Traps

Analytical detection of the bioactive molecules dopamine, thyroxine, hydrogen peroxide, and glucose using CsPbBr3 perovskite nanocrystals

Qualitative and quantitative detection of biologically important molecules such as dopamine, thyroxine, hydrogen peroxide, and glucose, using newer and cheaper technology is of paramount importance in biology and medicine. Anion exchange in lead halide perovskites, on account of its good emission yield, facilitates the sensing of these molecules by the naked eye using ultraviolet light. Simple chemistry is used to generate chloride ions from analyte molecules. Dopamine and thyroxine have an amine functional group, which forms an adduct with an equivalent amount of volatile hydrochloric acid to yield chloride ions in solution. The reducing nature of hydrogen peroxide and glucose is used to generate chloride ions through a reaction with sodium hypochlorite in stoichiometric amounts. The emission of CsPbBr3-coated paper/glass substrates shifts to the blue region in the presence of chloride ions. This helps in the detection of the above biologically important molecules up to parts per million (ppm) levels by employing fundamental chemistry aspects and well-known anion exchange in perovskite nanocrystals. The preparation of better and more efficient sensors, which are predominantly important in science and technology, can thus be achieved by developing the above novel, cost-effective alternative sensing method.

Spontaneous Heterointerface Modulation by a Methylammonium Tetrafluoroborate Additive for a Narrow-Bandgap FAPbI3 Photoabsorber in Perovskite Solar Cells

Over the past decade, the photovoltaic (PV) performance of perovskite solar cells (PSCs) has been considerably improved with the development of perovskite photoabsorbers. Among these, formamidinium-lead-iodide (FAPbI3) is a promising photoabsorber owing to its narrow bandgap and is mainly used in n-i-p-structured PSCs. The property modulation of FAPbI3 photoabsorbers while retaining their narrow bandgap is imperative for further development of PSCs. Molecular tetrafluoroborate anion (BF4-)-based materials can be used as additives in perovskite layers to prevent bandgap widening, while facilitating perovskite crystal growth; thus, they are suitable for FAPbI3 photoabsorbers in principle. However, BF4--based additives for narrow-bandgap FAPbI3 photoabsorbers have not been developed. This is presumably because of the higher temperatures required for FAPbI3 formation than that for other wide-bandgap perovskites, which likely changes the effects of BF4-based additives from those for wide-bandgap perovskites. In this study, we verified the applicability of methylammonium tetrafluoroborate (MABF4) as an additive in narrow-bandgap FAPbI3 photoabsorbers for improving their PV performance primarily via the spontaneous modulation of the heterointerfaces between FAPbI3 and carrier-transport materials, rather than the bulk quality improvement of FAPbI3 perovskite. At the interface of the hole-transport material and FAPbI3, MABF4 addition effectively eliminates the surface defects in all FAPbI3 components, even in the absence of BF4- over the heated FAPbI3 surface, suggesting a defect-suppression mechanism that differs from that observed in conventional ones. Moreover, at the interface of FAPbI3 and the TiO2 electron-transport material, the BF4-derived species, which likely includes decomposed BF4- owing to the high-temperature heating, spontaneously segregates upon deposition, thereby modulating the heterointerface. Furthermore, in addition to the carrier mobility ratio in FAPbI3 (e-:h+ ≈ 7:3), a time-resolved microwave conductivity measurement revealed that MABF4 addition eliminates carrier traps at the heterointerfaces. Our findings provide insights into promising FAPbI3-based PSCs, offering a valuable tool for their further development.

Lead Iodide Redistribution Enables In Situ Passivation for Blading Inverted Perovskite Solar Cells with 24.5% Efficiency

Blade-coating stands out as an alternative for fabricating scalable perovskite solar cells. However, it demands special control of the precursor composition regarding nucleation and crystallization and currently exhibits lower performance than the spin-coating process. It is mainly the resulting film morphology and excess lead iodide (PbI2) distribution that influences the optoelectronic properties. Here, the effectiveness of introducing N-Methyl-2-pyrrolidone (NMP) to regulate the structure of the perovskite layer and the redistribution of PbI2 is found. The introduction of NMP leads to the accumulation of excess PbI2, mainly on the top surface, reducing residual PbI2 at the perovskite buried interface. This not only facilitates the passivation of perovskite grain boundaries but also eliminates the potential degradation of the PbI2 triggered by light illumination in the perovskite buried interface. The optimized NMP-modified inverted perovskite solar cell achieves a champion efficiency of 24.5%, among the highest reported blade-coated perovskite solar cells. Furthermore, 13.68 cm2 blading perovskite solar modules are fabricated and demonstrate an efficiency of up to 20.4%. These findings underscore that with proper modulation of precursor composition, blade-coating can be a feasible and superior alternative for manufacturing high-quality perovskite films, paving the way for their large-scale applications in photovoltaic technology.

Progress of Hole-Transport Layers in Mixed Sn-Pb Perovskite Solar Cells

Hybrid organic-inorganic lead halide perovskite solar cells (PSCs) have rapidly emerged as a promising photovoltaic technology, with record efficiencies surpassing 26%, approaching the theoretical Shockley-Queisser limit. The advent of all-perovskite tandem solar cells (APTSCs), integrating Pb-based wide-bandgap (WBG) with mixed Sn-Pb narrow-bandgap (NBG) perovskites, presents a compelling pathway to surpass this limit. Despite recent innovations in hole transport layers (HTLs) that have significantly improved the efficiency and stability of lead-based PSCs, an effective HTL tailored for Sn-Pb NBG PSCs remains an unmet need. This review highlights the essential role of HTLs in enhancing the performance of Sn-Pb PSCs, focusing on their ability to mitigate non-radiative recombination and optimize the buried interface, thereby improving film quality. The distinct attributes of Sn-Pb perovskites, such as their lower energy levels and accelerated crystallization rates, necessitate HTLs with specialized properties. In this study, the latest advancements in HTLs are systematically examined for Sn-Pb PSCs, encompassing organic, self-assembled monolayer (SAM), inorganic materials, and HTL-free designs. The review critically assesses the inherent limitations of each HTL category, and finally proposes strategies to surmount these obstacles to reach higher device performance.

From Wide-Bandgap to Narrow-Bandgap Perovskite: Applications from Single-Junction to Tandem Optoelectronics

As perovskite solar device is burgeoning photoelectronic device, numerous studies to optimize perovskite solar device have been demonstrated. Amongst various advantages from perovskite light absorbing layer, attractive property of tunable bandgap allowed perovskite to be adopted in many different fields. Easily tunable bandgap property of perovskite opened the wide application and to get the most out of its potential, many researchers contributed as well. By precursor composition engineering, narrow bandgap with bandgap of less than 1.4 eV and wide bandgap with bandgap of more than 1.7 eV were achieved. Optimization of both narrow and wide bandgap perovskite solar cell could pave the way to all-perovskite tandem solar cell which is combination of top cell with wide bandgap and bottom cell with narrow bandgap. This review highlights numerous efforts to advance device performance of both narrow and wide bandgap perovskite solar cell and how they challenged the issues. And finally, efforts to operate and utilize all-tandem perovskite device in real world will be discussed.

Eliminating Non-Corner-Sharing Octahedral for Efficient and Stable Perovskite Solar Cells

The metal halide (BX6)4- octahedron, where B represents a metal cation and X represents a halide anion, is regarded as the fundamental structural and functional unit of metal halide perovskites. However, the influence of the way the (BX6)4- octahedra connect to each other has on the structural stability and optoelectronic properties of metal halide perovskite is still unclear. Here, the octahedral connectivity, including corner-, edge-, and face-sharing, of various CsxFA1-xPbI3 (0 ≤ x ≤ 0.3) perovskite films is tuned and reliably characterized through compositional and additive engineering, and with ultralow-dose transmission electron microscopy. It is found that the overall solar cell device performance, the charge carrier lifetime, the open-circuit voltage, and the current density-voltage hysteresis are all improved when the films consist of corner-sharing octahedra, and non-corner sharing phases are suppressed, even in films with the same chemical composition. Additionally, it is found that the structural, optoelectronic, and device performance stabilities are similarly enhanced when non-corner-sharing connectivities are suppressed. This approach, combining macroscopic device tests and microscopic material characterization, provides a powerful tool enabling a thorough understanding of the impact of octahedral connectivity on device performance, and opens a new parameter space for designing high-performance photovoltaic metal halide perovskite devices.

Hot Carrier Trapping and It's Influence to the Carrier Diffusion in CsPbBr3 Perovskite Film Revealed by Transient Absorption Microscopy

The defects in perovskite film can cause charge carrier trapping which shortens carrier lifetime and diffusion length. So defects passivation has become promising for the perovskite studies. However, how defects disturb the carrier transport and how the passivating affects the carrier transport in CsPbBr3 are still unclear. Here the carrier dynamics and diffusion processes of CsPbBr3 and LiBr passivated CsPbBr3 films are investigated by using transient absorption spectroscopy and transient absorption microscopy. It's found that there is a fast hot carrier trapping process with the above bandgap excitation, and the hot carrier trapping would decrease the population of cold carriers which are diffusible, then lower the carrier diffusion constant. It's proved that LiBr can passivate the defect and lower the trapping probability of hot carriers, thus improve the carrier diffusion rate. The finding demonstrates the influence of hot carrier trapping to the carrier diffusion in CsPbBr3 film.

Accelerated Design for Perovskite-Oxide-Based Photocatalysts Using Machine Learning Techniques

The rapid discovery of photocatalysts with desired performance among tens of thousands of potential perovskites represents a significant advancement. To expedite the design of perovskite-oxide-based photocatalysts, we developed a model of ABO3-type perovskites using machine learning methods based on atomic and experimental parameters. This model can be used to predict specific surface area (SSA), a key parameter closely associated with photocatalytic activity. The model construction involved several steps, including data collection, feature selection, model construction, web-service development, virtual screening and mechanism elucidation. Statistical analysis revealed that the support vector regression model achieved a correlation coefficient of 0.9462 for the training set and 0.8786 for the leave-one-out cross-validation. The potential perovskites with higher SSA than the highest SSA observed in the existing dataset were identified using the model and our computation platform. We also developed a webserver of the model, freely accessible to users. The methodologies outlined in this study not only facilitate the discovery of new perovskites but also enable exploration of the correlations between the perovskite properties and the physicochemical features. These findings provide valuable insights for further research and applications of perovskites using machine learning techniques.

Charge Transfer Kinetics in Halide Perovskites: On the Constraints of Time-Resolved Spectroscopy Measurements

Understanding photophysical processes in lead halide perovskites is an important aspect of optimizing the performance of optoelectronic devices. The determination of exact charge carrier extraction rate constants remains elusive, as there is a large and persistent discrepancy in the reported absolute values. In this review, we concentrate on experimental procedures adopted in the literature to obtain kinetic estimates of charge transfer processes and limitations imposed by the spectroscopy technique employed. Time-resolved techniques (e.g., transient absorption-reflection and time-resolved photoluminescence spectroscopy) are commonly employed to probe charge transfer at perovskite/transport layer interfaces. The variation in sample preparation and measurement conditions can produce a wide dispersion of the measured kinetic parameters. The selected time window and the kinetic fitting model employed introduce additional uncertainty. We discuss here evaluation strategies that rely on multiexponential fitting protocols (regular or stretched) and show how the dispersion in the reported values for carrier transfer rate constants can be resolved.

Recent Advances in Metal Oxide Electron Transport Layers for Enhancing the Performance of Perovskite Solar Cells

Perovskite solar cells (PSCs) have attracted considerable interest owing to their low processing costs and high efficiency. A crucial component of these devices is the electron transport layer (ETL), which plays a key role in extracting and transmitting light-induced electrons, modifying interfaces, and adjusting surface energy levels. This minimizes charge recombination in PSCs, a critical factor in their performance. Among the various ETL materials, titanium dioxide (TiO2) and tin dioxide (SnO2) stand out due to their excellent electron mobility, suitable band alignment, high transparency, and stability. TiO2 is widely used because of its appropriate conduction band position, easy fabrication, and favorable charge extraction properties. SnO2, on the other hand, offers higher electron mobility, better stability under UV illumination, and lower processing temperatures, making it a promising alternative. This paper summarizes the latest advancements in the research of electron transport materials, including material selection and a discussion of electron collection. Additionally, it examines doping techniques that enhance electron mobility and surface modification technologies that improve interface quality and reduce recombination. The impact of these parameters on the performance and passivation behavior of PSCs is also examined. Technological advancements in the ETL, especially those involving TiO2 and SnO2, are currently a prominent research direction for achieving high-efficiency PSCs. This review covers the current state and future directions in ETL research for PSCs, highlighting the crucial role of TiO2 and SnO2 in enhancing device performance.

Identification and Dynamics of Microsecond Long-Lived Charge Carriers for CsPbBr3 Perovskite Quantum Dots, Featuring Ambient Long-Term Stability

We analyze the stability and photophysical dynamics of CsPbBr3 perovskite quantum dots (PeQDs), fabricated under mild synthetic conditions and embedded in an amorphous silica (SiOx) matrix (CsPbBr3@SiOx), underscoring their sustained performance in ambient conditions for over 300 days with minimal optical degradation. However, this stability comes at the cost of a reduced photoluminescence efficiency. Time-resolved spectroscopic analyses, including flash-photolysis time-resolved microwave conductivity and time-resolved photoluminescence, show that excitons in CsPbBr3@SiOx films decay within 2.5 ns, while charge carriers recombine over approximately 230 ns. This longevity of the charge carriers is due to photoinduced electron transfer to the SiOx matrix, enabling hole retention. The measured hole mobility in these PeQDs is 0.880 cm2 V-1 s-1, underscoring their potential in optoelectronic applications. This study highlights the role of the silica matrix in enhancing the durability of PeQDs in humid environments and modifying exciton dynamics and photoluminescence, providing valuable insights for developing robust optoelectronic materials.

Elevated Efficiency and Stability of Hole-Transport-Layer-Free Perovskite Solar Cells Triggered by Surface Engineering

Surface engineering is one of the important strategies to enhance the power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). Herein, 2-chloro-1,3-dimethylimidazolidinium hexafluorophosphate (CIP) was introduced into PSCs to passivate the defects of the perovskite films. There are many F atoms in CIP molecules that have strong electronegativity and hydrophobicity. F groups can interact with Pb2+ defects, inhibit interface recombination, improve the interaction between the CIP ionic liquid and perovskite film, and reduce the defect density of perovskites, thus improving the stability of perovskite devices. Density functional theory calculation reveals that CIP can interact with uncoordinated Pb2+ in perovskites through coordination, reduce the defects of perovskite films, and inhibit nonradiation recombination. The ITO/SnO2/MAPbI3/CIP/carbon devices without hole transport layers possessed the highest PCE of 17.06%. Moreover, the unencapsulated device remains at 98.18% of the initial efficiency stored in 30-40% relative humidity for 850 h. This strategy provides an effective reference for enhancing the performance of PSCs.

Selective detection of ascorbic acid by tuning the composition and fluorescence of the cesium lead halide perovskite nanocrystals

Lead halide perovskite nanocrystals (PNCs) have attracted intense attention due to their excellent optoelectronic properties. In this work, a series of water-stable CsPb(Br/I)3PNCs fluorescent probes were prepared using an anion exchange method. It was found that the PNCs probes could be used to detect ascorbic acid (AA) in water, and interestingly, the FL spectra of the PNCs probes can be adjusted by controlling the concentration of KI in anion exchange to improve the detection selectivity of AA. The high sensitivity and selectivity make CsPb(Br/I)3PNCs an ideal material for AA sensing. The concentration of AA can be linearly measured in the range from 0.01 to 50μM, with a detection limit of 4.2 nM. The reason for the enhanced FL of CsPb(Br/I)3PNCs was studied, and it is considered that AA causes the aggregation of CsPb(Br/I)3PNCs. This strategy of improving the selectivity of the probe to the substrate by adjusting the spectrum will significantly expand the application of PNCs in the field of analysis and detection.

Dopant-additive synergism enhances perovskite solar modules

Perovskite solar cells (PSCs) are among the most promising photovoltaic technologies owing to their exceptional optoelectronic properties1,2. However, the lower efficiency, poor stability and reproducibility issues of large-area PSCs compared with laboratory-scale PSCs are notable drawbacks that hinder their commercialization3. Here we report a synergistic dopant-additive combination strategy using methylammonium chloride (MACl) as the dopant and a Lewis-basic ionic-liquid additive, 1,3-bis(cyanomethyl)imidazolium chloride ([Bcmim]Cl). This strategy effectively inhibits the degradation of the perovskite precursor solution (PPS), suppresses the aggregation of MACl and results in phase-homogeneous and stable perovskite films with high crystallinity and fewer defects. This approach enabled the fabrication of perovskite solar modules (PSMs) that achieved a certified efficiency of 23.30% and ultimately stabilized at 22.97% over a 27.22-cm2 aperture area, marking the highest certified PSM performance. Furthermore, the PSMs showed long-term operational stability, maintaining 94.66% of the initial efficiency after 1,000 h under continuous one-sun illumination at room temperature. The interaction between [Bcmim]Cl and MACl was extensively studied to unravel the mechanism leading to an enhancement of device properties. Our approach holds substantial promise for bridging the benchtop-to-rooftop gap and advancing the production and commercialization of large-area perovskite photovoltaics.

Rational control of the typical surface defects of hybrid perovskite using tetrahexylammonium iodide

There are numerous defects existing on the surface and grain boundary of perovskite, which adversely affect the performance and stability of perovskite solar cell devices. Systematic first-principles calculations show that the I vacancy (VI), Pb vacancy (VPb), Pb-I antisite (PbI), and I-Pb antisite (IPb) defects can significantly affect the electronic properties of the surface of formamidinium lead triiodide (FAPbI3); in particular the VPb, PbI and IPb surface defects can introduce defect energy levels in the band gap. Tetrahexylammonium iodide (THAI) that is strongly adsorbed on the (1 0 0) surface of FAPbI3 by forming Pb-I coordination bonds and I⋯H hydrogen bonds could eliminate or reduce the defect states near the band edge or in the band gap by transferring electrons between THAI and the surface of FAPbI3. In particular, the defect states introduced by VPb could be completely eliminated after the adsorption of THAI. This study shows an in-depth understanding of the influence of defects on the electronic properties of the surface of FAPbI3, as well as the passivation mechanism of organic salts on the surface defects of perovskite.

Synthesis of a water-stable fluorescence CsPbBr3 perovskite by dual-supersaturated recrystallization method and tuning the fluorescence spectrum for selective detection of folic acid

As an excellent fluorescent material, cesium lead halide perovskite nanocrystals (PNCs) is rarely used for analytical purposes because the PNCs are unstable in polar solvents, especially water. Developing a new synthesis method to prepare water-stable PNCs makes it promising for the detection of analytes in aqueous solutions. Herein, by using the solubility difference of the precursors in different solvents, we successfully synthesized water-stable CsPbBr3 PNCs by a dual-supersaturated recrystallization method at room temperature. We also found that the fluorescence of the as-prepared CsPbBr3 PNCs could be quenched by some small organic molecules, such as folic acid (FA) and dopamine (DA). By using a chloride-induced anion exchange reaction method, the fluorescence emission peak of the CsPbBr3 PNCs could be tuned from 518 to 418 nm and the emission color changed from green to blue. The blue emission chloride-exchanged PNCs have a good selectivity for only FA and a good linear relationship is established between the fluorescence quenching rate of the PNCs and concentration of FA from 10.0 to 140.0 μM, with a limit of detection (LOD) of 0.9 μM. This work expanded the applications of PNCs in the field of analytical chemistry and also proposed a new strategy for improving selectivity by tuning the emission spectrum of a fluorescent probe.

Polaron Vibronic Progression Shapes the Optical Response of 2D Perovskites

The optical response of 2D layered perovskites is composed of multiple equally-spaced spectral features, often interpreted as phonon replicas, separated by an energy Δ ≃ 12 - 40 meV, depending upon the compound. Here the authors show that the characteristic energy spacing, seen in both absorption and emission, is correlated with a substantial scattering response above ≃ 200 cm-1 (≃ 25 meV) observed in resonant Raman. This peculiar high-frequency signal, which dominates both Stokes and anti-Stokes regions of the scattering spectra, possesses the characteristic spectral fingerprints of polarons. Notably, its spectral position is shifted away from the Rayleigh line, with a tail on the high energy side. The internal structure of the polaron consists of a series of equidistant signals separated by 25-32 cm-1 (3-4 meV), depending upon the compound, forming a polaron vibronic progression. The observed progression is characterized by a large Huang-Rhys factor (S > 6) for all of the 2D layered perovskites investigated here, indicative of a strong charge carrier - lattice coupling. The polaron binding energy spans a range ≃ 20-35 meV, which is corroborated by the temperature-dependent Raman scattering data. The investigation provides a complete understanding of the optical response of 2D layered perovskites via the direct observation of polaron vibronic progression. The understanding of polaronic effects in perovskites is essential, as it directly influences the suitability of these materials for future opto-electronic applications.

Atomic Structure and Dynamics of Organic-Inorganic Hybrid Perovskite Formamidinium Lead Iodide

The atomic dynamic behaviors of formamidinium lead iodide [HC(NH2)2PbI3] are critical for understanding and improving photovoltaic performances. However, they remain unclear. Here, we investigate the structural phase transitions and the reorientation dynamics of the formamidinium cation [HC(NH2)2+, FA+] of FAPbI3 using neutron scattering techniques. Two structural phase transitions occur with decreasing temperature, from cubic to tetragonal phase at 285 K and then to another tetragonal at 140 K, accompanied by gradually frozen reorientation of FA cations. The nearly isotropic reorientation in the cubic phase is suppressed to reorientation motions involving a two-fold (C2) rotation along the N···N axis and a four-fold (C4) rotation along the C-H axis in the tetragonal phase, and eventually to local disordered motion as a partial C4 along the C-H axis in another tetragonal phase, thereby indicating an intimate interplay between lattice and orientation degrees of freedom in the hybrid perovskite materials. The present complete atomic structure and dynamics provide a solid standing point to understand and then improve photovoltaic properties of organic-inorganic hybrid perovskites in the future.

Hole Transport Layer-Free Low-Bandgap Perovskite Solar Cells for Efficient All-Perovskite Tandems

Low-bandgap (LBG, Eg  ≈1.25 eV) tin-lead (Sn-Pb) perovskite solar cells (PSCs) play critical roles in constructing efficient all-perovskite tandem solar cells (TSCs) that can surpass the efficiency limit of single-junction solar cells. However, the traditional poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) hole transport layer (HTL) in LBG PSCs usually restricts device efficiency and stability. Here, a strategy of employing 2-aminoethanesulfonic acid (i.e., taurine) as the interface bridge to fabricate efficient HTL-free LBG PSCs with improved optoelectronic properties of the perovskite absorbers at the buried contacts is reported. Taurine-modified ITO substrate has lower optical losses, better energy level alignment, and higher charge transfer capability than PEDOT:PSS HTL, leading to significantly improved open-circuit voltage (VOC ) and short-circuit current density of corresponding devices. The best-performing LBG PSC with a power conversion efficiency (PCE) of 22.50% and an impressive VOC of 0.911 V is realized, enabling all-perovskite TSCs with an efficiency of 26.03%. The taurine-based HTL-free TSCs have highly increased stability, retaining more than 90% and 80% of their initial PCEs after constant operation under 1-sun illumination for 600 h and under 55 °C thermal stress for 950 h, respectively. This work provides a facile strategy for fabricating efficient and stable perovskite devices with a simplified HTL-free architecture.

Archetype-Cation-Based Room-Temperature Ionic Liquid: Aliphatic Primary Ammonium Bis(trifluoromethylsulfonyl)imide as a Highly Functional Additive for a Hole Transport Material in Perovskite Solar Cells

Room-temperature ionic liquids (RTILs) have attracted significant attention owing to their unique nature and a variety of potential applications. The archetypal RTIL comprising an aliphatic primary ammonium was discovered over a century ago, but this cation is seldom used in modern RTILs because other bulky cations (e.g., quaternary ammonium-, pyridine-, and imidazole-based cations) are prominent in current major applications, such as electrolytes and solvents, which require low and/or reversible reactivities. However, although the design of materials should change according to the intended application, RTIL designs remain conventional even when applied in unexplored fields, limiting their functions. Herein, RTIL consisting of an archetypal aliphatic primary ammonium (i.e., n-octylammonium: OA) cation and a modern bis(trifluoromethylsulfonyl)imide (TFSI) anion is proposed and demonstrated as a highly functional additive for a 2,2',7,7'-tetrakis(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (Spiro-OMeTAD), which is the most common hole transport material (HTM), in perovskite solar cells (PSCs). The OA-TFSI additive exhibits prominent functions via permanent reactions of the component ions with the PSC components, thus providing several advantages. The OA cations spontaneously and densely passivate the perovskite layer during the HTM deposition process, leading to both suppression of carrier recombination at the HTM/perovskite interface and hydrophobic perovskite surfaces. Meanwhile, the TFSI anions effectively improve the HTM function most likely via efficient stabilization of the Spiro-OMeTAD radical, enhancing hole collection properties in the PSCs. Consequently, PSC performances involving long-term stability were significantly improved using the OA-TFSI additive. Based on the present results, this study advocates that reconsidering the RTIL design, even when it differs from the current major designs yet is suitable for a target application, can provide functions superior to conventional ones. The insights obtained in this work will spur further study of RTIL designs and aid the development of the broad materials science field including PSCs.

Design of optimized photonic-structure and analysis of adding a SiO2 layer on the parallel CH3NH3PbI3/CH3NH3SnI3 perovskite solar cells

So far, remarkable achievements have been obtained by optimizing the device architecture and modeling of solar cells is a precious and very effective way to comprehend a better description of the physical mechanisms in solar cells. As a result, this study has inspected two-dimensional simulation of perovskite solar cells (PSCs) to achieve a precise model. The solution which has been employed is based on the finite element method (FEM). First, the periodically light trapping (LT) structure has been replaced with a planar structure. Due to that, the power conversion efficiency (PCE) of PSC was obtained at 14.85%. Then, the effect of adding an SiO2 layer to the LT structure as an anti-reflector layer was investigated. Moreover, increasing the PCE of these types of solar cells, a new structure including a layer of CH3NH3SnI3 as an absorber layer was added to the structure of PSCs in this study, which resulted in 25.63 mA/cm2 short circuit current (Jsc), 0.96 V open circuit voltage (Voc), and 20.48% PCE.

Spin Coherence and Spin Relaxation in Hybrid Organic-Inorganic Lead and Mixed Lead-Tin Perovskites

Metal halide perovskites make up a promising class of materials for semiconductor spintronics. Here we report a systematic investigation of coherent spin precession, spin dephasing and spin relaxation of electrons and holes in two hybrid organic-inorganic perovskites MA0.3FA0.7PbI3 and MA0.3FA0.7Pb0.5Sn0.5I3 using time-resolved Faraday rotation spectroscopy. With applied in-plane magnetic fields, we observe robust Larmor spin precession of electrons and holes that persists for hundreds of picoseconds. The spin dephasing and relaxation processes are likely to be sensitive to the defect levels. Temperature-dependent measurements give further insights into the spin relaxation channels. The extracted electron Landé g-factors (3.75 and 4.36) are the biggest among the reported values in inorganic or hybrid perovskites. Both the electron and hole g-factors shift dramatically with temperature, which we propose to originate from thermal lattice vibration effects on the band structure. These results lay the foundation for further design and use of lead- and tin-based perovskites for spintronic applications.

Recent Advances in the Synthesis and Application of Vacancy-Ordered Halide Double Perovskite Materials for Solar Cells: A Promising Alternative to Lead-Based Perovskites

Lead-based halide perovskite materials are being developed as efficient light-absorbing materials for use in perovskite solar cells (PSCs). PSCs have shown remarkable progress in power conversion efficiency, increasing from 3.80% to more than 25% within a decade, showcasing their potential as a promising renewable energy technology. Although PSCs have many benefits, including a high light absorption coefficient, the ability to tune band gap, and a long charge diffusion length, the poor stability and the toxicity of lead represent a significant disadvantage for commercialization. To address this issue, research has focused on developing stable and nontoxic halide perovskites for use in solar cells. A potential substitute is halide double perovskites (HDPs), particularly vacancy-ordered HDPs, as they offer greater promise because they can be processed using a solution-based method. This review provides a structural analysis of HDPs, the various synthesis methods for vacancy-ordered HDPs, and their impact on material properties. Recent advances in vacancy-ordered HDPs are also discussed, including their role in active and transport layers of solar cells. Furthermore, valuable insights for developing high-performance vacancy-ordered HDP solar cells are reported from the detailed information presented in recent simulation studies. Finally, the potential of vacancy-ordered HDPs as a substitute for lead-based perovskites is outlined. Overall, the ability to tune optical and electronic properties and the high stability and nontoxicity of HDPs have positioned them as a promising candidate for use in photovoltaic applications.

Design Rules for Obtaining Narrow Luminescence from Semiconductors Made in Solution

Solution-processed semiconductors are in demand for present and next-generation optoelectronic technologies ranging from displays to quantum light sources because of their scalability and ease of integration into devices with diverse form factors. One of the central requirements for semiconductors used in these applications is a narrow photoluminescence (PL) line width. Narrow emission line widths are needed to ensure both color and single-photon purity, raising the question of what design rules are needed to obtain narrow emission from semiconductors made in solution. In this review, we first examine the requirements for colloidal emitters for a variety of applications including light-emitting diodes, photodetectors, lasers, and quantum information science. Next, we will delve into the sources of spectral broadening, including "homogeneous" broadening from dynamical broadening mechanisms in single-particle spectra, heterogeneous broadening from static structural differences in ensemble spectra, and spectral diffusion. Then, we compare the current state of the art in terms of emission line width for a variety of colloidal materials including II-VI quantum dots (QDs) and nanoplatelets, III-V QDs, alloyed QDs, metal-halide perovskites including nanocrystals and 2D structures, doped nanocrystals, and, finally, as a point of comparison, organic molecules. We end with some conclusions and connections, including an outline of promising paths forward.

Carriers, Quasi-particles, and Collective Excitations in Halide Perovskites

Halide perovskites (HPs) are potential game-changing materials for a broad spectrum of optoelectronic applications ranging from photovoltaics, light-emitting devices, lasers to radiation detectors, ferroelectrics, thermoelectrics, etc. Underpinning this spectacular expansion is their fascinating photophysics involving a complex interplay of carrier, lattice, and quasi-particle interactions spanning several temporal orders that give rise to their remarkable optical and electronic properties. Herein, we critically examine and distill their dynamical behavior, collective interactions, and underlying mechanisms in conjunction with the experimental approaches. This review aims to provide a unified photophysical picture fundamental to understanding the outstanding light-harvesting and light-emitting properties of HPs. The hotbed of carrier and quasi-particle interactions uncovered in HPs underscores the critical role of ultrafast spectroscopy and fundamental photophysics studies in advancing perovskite optoelectronics.

High-Performance Perovskite Solar Cells and Modules Fabricated by Slot-Die Coating with Nontoxic Solvents

Energy shortage has become a global issue in the twenty-firt century, as energy consumption grows at an alarming rate as the fossil fuel supply exhausts. Perovskite solar cells (PSCs) are a promising photovoltaic technology that has grown quickly in recent years. Its power conversion efficiency (PCE) is comparable to that of traditional silicon-based solar cells, and scale-up costs can be substantially reduced due to its utilization of solution-processable fabrication. Nevertheless, most PSCs research uses hazardous solvents, such as dimethylformamide (DMF) and chlorobenzene (CB), which are not suitable for large-scale ambient operations and industrial production. In this study, we have successfully deposited all of the layers of PSCs, except the top metal electrode, under ambient conditions using a slot-die coating process and nontoxic solvents. The fully slot-die coated PSCs exhibited PCEs of 13.86% and 13.54% in a single device (0.09 cm²) and mini-module (0.75 cm²), respectively.

Photocarrier-induced persistent structural polarization in soft-lattice lead halide perovskites

The success of the lead halide perovskites in diverse optoelectronics has motivated considerable interest in their fundamental photocarrier dynamics. Here we report the discovery of photocarrier-induced persistent structural polarization and local ferroelectricity in lead halide perovskites. Photoconductance studies of thin-film single-crystal CsPbBr₃ at 10 K reveal long-lasting persistent photoconductance with an ultralong photocarrier lifetime beyond 10⁶ s. X-ray diffraction studies reveal that photocarrier-induced structural polarization is present up to a critical freezing temperature. Photocapacitance studies at cryogenic temperatures further demonstrate a systematic local phase transition from linear dielectric to paraelectric and relaxor ferroelectric under increasing illumination. Our theoretical investigations highlight the critical role of photocarrier-phonon coupling and large polaron formation in driving the local relaxor ferroelectric phase transition. Our findings show that this photocarrier-induced persistent structural polarization enables the formation of ferroelectric nanodomains at low temperature, which suppress carrier recombination and offer the possibility of exploring intriguing carrier-phonon interplay and the rich polaron photophysics.

Distinguishing Electron Diffusion and Extraction in Methylammonium Lead Iodide

Charge diffusion and extraction are crucial steps in the operation of solar cells. Here we show that time-resolved photoluminescence can be used to study electron diffusion in hybrid perovskite films and subsequent transfer to the adjacent electron extraction layer. As diffusion and transfer to the extraction layer are consecutive processes, they can be hard to distinguish, but by exciting from each side of the sample we can separate them and identify which process limits charge extraction. We find that the introduction of a fullerene monolayer between the methylammonium lead iodide (MAPbI3) and the electron-transporting SnO2 layers greatly increases the electron transfer velocity between them to the extent that electron diffusion limits the rate of electron extraction. Our results suggest that increasing the electron diffusion coefficient in MAPbI3 would further enhance the electron extraction rate, which could result in more efficient n-i-p type solar cells.

Light-Induced Transient Lattice Dynamics and Metastable Phase Transition in CH3NH3PbI3 Nanocrystals

Methylammonium lead iodide (MAPbI₃) perovskite nanocrystals (NCs) offer desirable optoelectronic properties with prospective utility in photovoltaics, lasers, and light-emitting diodes (LEDs). Structural rearrangements of MAPbI₃ in response to photoexcitation, such as lattice distortions and phase transitions, are of particular interest, as these engender long carrier lifetime and bolster carrier diffusion. Here, we use variable temperature X-ray diffraction (XRD) and synchrotron-based transient X-ray diffraction (TRXRD) to investigate lattice response following ultrafast optical excitation. MAPbI₃ NCs are found to slowly undergo a phase transition from the tetragonal to a pseudocubic phase over the course of 1 ns under 0.02-4.18 mJ/cm² fluence photoexcitation, with apparent nonthermal lattice distortions attributed to polaron formation. Lattice recovery exceeds time scales expected for both carrier recombination and thermal dissipation, indicating meta-stability likely due to the proximal phase transition, with symmetry-breaking along equatorial and axial directions. These findings are relevant for fundamental understanding and applications of structure-function properties.

Microwave-facilitated crystal growth of defect-passivated triple-cation metal halide perovskites toward efficient solar cells

Structural defects at the surface and within the bulk of perovskite films hinder efficient energy conversion in solar cells due to the loss of charge carriers through non-radiative recombination. Post-passivation approaches have been proposed in an attempt to eliminate surface defects, with bulk defects being rarely studied. Moreover, it is of interest to investigate the difference in the perovskite crystal growth with and without simultaneous defect passivation. Here, we study a new crystal growth strategy to realize high-quality triple-cation perovskite crystals via utilizing microwave irradiation combined with a continuous supply of defect passivators from a reservoir solution of trioctyl-n-phosphine oxide (TOPO). The proposed method facilitates the growth of perovskite crystals with TOPO ligand coordination in the whole film region. Consequently, the processed perovskite film demonstrates distinctive features of significantly suppressed non-radiative recombination, substantial defect reduction and morphological changes compared to the perovskites processed by conventional thermal annealing. The power conversion efficiency is enhanced owing to the improved open-circuit voltage (V_oc) and short-circuit current (J_sc). The results of this study are expected to assist in the development of diverse approaches for the control of perovskite crystal growth with in situ defect passivation toward high efficiency in solar cells.

Ligands in Lead Halide Perovskite Nanocrystals: From Synthesis to Optoelectronic Applications

Ligands are indispensable for perovskite nanocrystals (NCs) throughout the whole lifetime, as they not only play key roles in the controllable synthesis of NCs with different sizes and shapes, but also act as capping shell that affects optical properties and electrical coupling of NCs. Establishing a systematic understanding of the relationship between ligands and perovskite NCs is significant to enable many potential applications of NCs. This review mainly focuses on the influence of ligands on perovskite NCs. First of all, the ligands-dominated size and shape control of NCs is discussed. Whereafter, the surface defects of NCs and the bonding between ligands and perovskite NCs are classified, and corresponding post-treatment of surface defects via ligands is also summarized. Furthermore, advances in engineering the ligands towards the high performance of optoelectronic devices based on perovskite NCs, including photodetector, solar cell, light emitting diode (LED), and laser, and finally to potential challenges are also discussed.

Elucidation of a Photothermal Energy Conversion Mechanism in Hydrogenated Molybdenum Suboxide: Interplay of Trapped Charges and Their Dielectric Interactions

Hydrogenated molybdenum suboxide (H_xMoO_3-y) is a promising photothermal energy conversion (PEC) material. However, its charge carrier dynamics and underlying mechanisms remain unclear. Utilizing flash-photolysis time-resolved microwave conductivity, we investigated charge carrier-dielectric interactions in the Pt/H_xMoO_3-y composite. The charge recombination of H₂-reduced Pt/H_xMoO_3-y was 2-3 orders of magnitude faster than that of Pt/MoO₃, indicating efficient PEC. A complex photoconductivity study revealed that Pt/H_xMoO_3-y has two types of trapping mechanisms, Drude-Zener (DZ) and negative permittivity effect (NPE) modes, depending on the reduction temperature. Pt/H_xMoO_3-y reduced at 100 °C exhibited a dominant NPE owing to the electrical interaction of trapped charges with the surrounding ions and/or OH base. This polaronic trapped state retarded the PEC process. We found Pt/H_xMoO_3-y reduced at 200 °C to be optimal owing to the balanced suppression of the NPE and charge diffusion. This is the first report revealing the charge dynamics in hydrogenated metal oxides and their impacts on PEC processes.

Manipulation of the Buried Interface for Robust Formamidinium-based Sn-Pb Perovskite Solar Cells with NiOx Hole-Transport Layers

Low band gap tin-lead perovskite solar cells (Sn-Pb PSCs) are expected to achieve higher efficiencies than Pb-PSCs and regarded as key components of tandem PSCs. However, the realization of high efficiency is challenged by the instability of Sn²⁺ and the imperfections at the charge transfer interfaces. Here, we demonstrate an efficient ideal band gap formamidinium (FA)-based Sn-Pb (FAPb_0.5 Sn_0.5 I₃ ) PSC, by manipulating the buried NiO_x /perovskite interface with 4-hydroxyphenethyl ammonium halide (OH-PEAX, X=Cl^- , Br^- , or I^- ) interlayer, which exhibits fascinating functions of reducing the surface defects of the NiO_x hole transport layer (HTL), enhancing the perovskite film quality, and improving both the energy level matching and physical contact at the interface. The effects of different halide anions have been elaborated and a 20.53 % efficiency is obtained with OH-PEABr, which is the highest one for FA-based Sn-Pb PSCs using NiO_x HTLs. Moreover, the device stability is also boosted.

IR Spectroscopic Degradation Study of Thin Organometal Halide Perovskite Films

The advantages of IR spectroscopy include relatively fast analysis and sensitivity, which facilitate its wide application in the pharmaceutical, chemical and polymer sectors. Thus, IR spectroscopy provides an excellent opportunity to monitor the degradation and concomitant evolution of the molecular structure within a perovskite layer. As is well-known, one of the main limitations preventing the industrialization of perovskite solar cells is the relatively low resistance to various degradation factors. The aim of this work was to study the degradation of the surface of a perovskite thin film CH3NH3PbI3-xClx caused by atmosphere and light. To study the surface of CH3NH3PbI3-xClx, a scanning electron microscope, infrared (IR) spectroscopy and optical absorption were used. It is shown that the degradation of the functional layer of perovskite proceeds differently depending on the acting factor present in the surrounding atmosphere, whilst the chemical bonds are maintained within the perovskite crystal structure under nitrogen. However, when exposed to an ambient atmosphere, an expansion of the NH3+ band is observed, which is accompanied by a shift in the N-H stretching mode toward higher frequencies; this can be explained by the degradation of the perovskite surface due to hydration. This paper shows that the dissociation of H2O molecules under the influence of sunlight can adversely affect the efficiency and stability of the absorbing layer. This work presents an approach to the study of perovskite structural stability with the aim of developing alternative concepts to the fabrication of stable and sustainable perovskite solar cells.

Rational Selection of the Lewis Base Molecules Targeted for Lead-Based Defects of Perovskite Solar Cells: The Synergetic Co-passivation of Carbonyl and Carboxyl Groups

Defect passivation through Lewis acid-base chemistry has recently attracted significant interest because of its proven ability to improve the power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). However, tedious trial-and-error procedures are commonly used for the selection of Lewis molecules due to their abundant variety. Herein, two typical Lewis base molecules, the M molecule containing only carbonyl groups and the 3M molecule containing both carbonyl and carboxyl groups, are proposed to passivate the Pb-based defects and mitigate their negative impacts on PSC performance. The results indicated that much stronger coordination bonds can be formed between the 3M molecule and uncoordinated Pb²⁺ than with the M molecule. Because of the benefit from the synergetic co-passivation effect of carbonyl and carboxyl groups, an impressive maximum PCE of 24.07% was achieved via 3M modification. More importantly, the modified devices demonstrated remarkably improved operational stability.

Optical Visualization of Photoexcitation Diffusion in All-Inorganic Perovskite at High Temperature

All-inorganic halide perovskites are promising candidates for optoelectronic and photovoltaic devices because of their good thermal stability and remarkable optoelectronic properties. Among those properties, carrier transport properties are critical as they inherently dominate the device performance. The transport properties of perovskites have been widely studied at room and lower temperatures, but their high-temperature (i.e., tens of degrees above room temperature) characteristics are not fully understood. Here, the photoexcitation diffusion is optically visualized by transient photoluminescence microscopy (TPLM), through which the temperature-dependent transport characteristics from room temperature to 80 °C are studied in all-inorganic CsPbBr₃ single-crystalline microplates. We reveal the decreasing trend of diffusion coefficient and the almost unchanged trend of diffusion length when heating the sample to high temperature. The phonon scattering in combination with the variation of effective mass is proposed for the explanation of the temperature-dependent diffusion behavior.

Data-driven design of high-performance MASnxPb1-xI3 perovskite materials by machine learning and experimental realization

The photovoltaic performance of perovskite solar cell is determined by multiple interrelated factors, such as perovskite compositions, electronic properties of each transport layer and fabrication parameters, which makes it rather challenging for optimization of device performances and discovery of underlying mechanisms. Here, we propose and realize a novel machine learning approach based on forward-reverse framework to establish the relationship between key parameters and photovoltaic performance in high-profile MASnxPb1-xI3 perovskite materials. The proposed method establishes the asymmetrically bowing relationship between band gap and Sn composition, which is precisely verified by our experiments. Based on the analysis of structural evolution and SHAP library, the rapid-change region and low-bandgap plateau region for small and large Sn composition are explained, respectively. By establishing the models for photovoltaic parameters of working photovoltaic devices, the deviation of short-circuit current and open-circuit voltage with band gap in defective-zone and low-bandgap-plateau regions from Shockley-Queisser theory is captured by our models, and the former is due to the deep-level traps formed by crystallographic distortion and the latter is due to the enhanced susceptibility by increased Sn4+ content. The more difficulty for hole extraction than electron is also concluded in the models and the prediction curve of power conversion efficiency is in a good agreement with Shockley-Queisser limit. With the help of search and optimization algorithms, an optimized Sn:Pb composition ratio near 0.6 is finally obtained for high-performance perovskite solar cells, then verified by our experiments. Our constructive method could also be applicable to other material optimization and efficient device development.

Long-range charge carrier mobility in metal halide perovskite thin-films and single crystals via transient photo-conductivity

Charge carrier mobility is a fundamental property of semiconductor materials that governs many electronic device characteristics. For metal halide perovskites, a wide range of charge carrier mobilities have been reported using different techniques. Mobilities are often estimated via transient methods assuming an initial charge carrier population after pulsed photoexcitation and measurement of photoconductivity via non-contact or contact techniques. For nanosecond to millisecond transient methods, early-time recombination and exciton-to-free-carrier ratio hinder accurate determination of free-carrier population after photoexcitation. By considering both effects, we estimate long-range charge carrier mobilities over a wide range of photoexcitation densities via transient photoconductivity measurements. We determine long-range mobilities for FA_0.83Cs_0.17Pb(I_0.9Br_0.1)₃, (FA_0.83MA_0.17)_0.95Cs_0.05Pb(I_0.9Br_0.1)₃ and CH₃NH₃PbI_3-xCl_x polycrystalline films in the range of 0.3 to 6.7 cm² V⁻¹ s⁻¹. We demonstrate how our data-processing technique can also reveal more precise mobility estimates from non-contact time-resolved microwave conductivity measurements. Importantly, our results indicate that the processing of polycrystalline films significantly affects their long-range mobility.

Charge carrier mobility is a fundamental property of semiconductors. The authors of this study demonstrate a novel way to estimate long-range mobilities of perovskite thin-films and single crystals by taking early-time carrier dynamics into account.

Photoinduced large polaron transport and dynamics in organic-inorganic hybrid lead halide perovskite with terahertz probes

Organic-inorganic hybrid metal halide perovskites (MHPs) have attracted tremendous attention for optoelectronic applications. The long photocarrier lifetime and moderate carrier mobility have been proposed as results of the large polaron formation in MHPs. However, it is challenging to measure the effective mass and carrier scattering parameters of the photogenerated large polarons in the ultrafast carrier recombination dynamics. Here, we show, in a one-step spectroscopic method, that the optical-pump and terahertz-electromagnetic probe (OPTP) technique allows us to access the nature of interplay of photoexcited unbound charge carriers and optical phonons in polycrystalline CH₃NH₃PbI₃ (MAPbI₃) of about 10 μm grain size. Firstly, we demonstrate a direct spectral evidence of the large polarons in polycrystalline MAPbI₃. Using the Drude-Smith-Lorentz model along with the Frӧhlich-type electron-phonon (e-ph) coupling, we determine the effective mass and scattering parameters of photogenerated polaronic carriers. We discover that the resulting moderate polaronic carrier mobility is mainly influenced by the enhanced carrier scattering, rather than the polaron mass enhancement. While, the formation of large polarons in MAPbI₃ polycrystalline grains results in a long charge carrier lifetime at room temperature. Our results provide crucial information about the photo-physics of MAPbI₃ and are indispensable for optoelectronic device development with better performance.

Engineering the Non-Radiative Recombination of Mixed-Halide Perovskites with Optimal Bandgap for Indoor Photovoltaics

Indoor photovoltaics have attracted increasing attention, since they can provide sustainable energy through the recycling of photon energy from household dim lighting. However, solar cells exhibiting high performance under sunlight may not perform well under indoor light conditions, mainly due to the mismatch of the irradiance spectrum. In particular, most of the indoor light sources emit visible photons with negligible near-infrared irradiance. According to the detailed balance theory, the optimal bandgap for indoor photovoltaics should be relatively larger, considering the trade-off between photocurrent and photovoltage losses. In this work, a systematic comparison of the theoretical limits of the conventional and indoor photovoltaics is presented. Then the non-radiative recombination losses are reduced by a synergetic treatment with Pb(SCN)₂ and PEABr, resulting relatively high open circuit voltage of 1.29 V and power conversion efficiency of 17.32% under 1 sun illumination. Furthermore, the devices are fully characterized under weak indoor light (1000 lux, 4000 K LED) achieving a high efficiency of 37.18%, which is promising for real applications.

Optoelectronic Enhancement of Perovskite Solar Cells through the Incorporation of Plasmonic Particles

The optoelectronic advantages of anchoring plasmonic silver and copper particles and non-plasmonic titanium particles onto zinc oxide (ZnO) nanoflower (NF) scaffolds for the fabrication of perovskite solar cells (PSCs) are addressed in this article. The metallic particles were sputter-deposited as a function of sputtering time to vary their size on solution-grown ZnO NFs on which methylammonium lead iodide perovskite was crystallized in a controlled environment. Optical absorption measurements showed impressive improvements in the light-harvesting efficiency (LHE) of the devices using silver nanoparticles and some concentrations of copper, whereas the LHE was relatively lower in devices used titanium than in a control device without any metallic particles. Fully functional PSCs were fabricated using the plasmonic and non-plasmonic metallic film-decorated ZnO NFs. Several fold enhancements in photoconversion efficiency were achieved in the silver-containing devices compared with the control device, which was accompanied by an increase in the photocurrent density, photovoltage, and fill factor. To understand the plasmonic effects in the photoanode, the LHE, photo-current density, photovoltage, photoluminescence, incident photon-to-current conversion efficiency, and electrochemical impedance properties were thoroughly investigated. This research showcases the efficacy of the addition of plasmonic particles onto photo anodes, which leads to improved light scattering, better charge separation, and reduced electron–hole recombination rate.

Carrier recombination in CH3NH3PbI3: why is it a slow process?

In methylammonium lead iodide (MAPbI₃), a slow recombination process of photogenerated carriers has often been considered to be the most intriguing property of the material resulting in high-efficiency perovskite solar cells. In spite of intense research over a decade or so, a complete understanding of carrier recombination dynamics in MAPbI₃has remained inconclusive. In this regard, several microscopic processes have been proposed so far in order to explain the slow recombination pathways (both radiative and non-radiative), such as the existence of shallow defects, a weak electron-phonon coupling, presence of ferroelectric domains, screening of band-edge charges through the formation of polarons, occurrence of the Rashba splitting in the band(s), and photon-recycling in the material. Based on the up-to-date findings, we have critically assessed each of these proposals/models to shed light on the origin of a slow recombination process in MAPbI₃. In this review, we have presented the interplay between the mechanisms and our views/perspectives in determining the likely processes, which may dictate the recombination dynamics in the material. We have also deliberated on their interdependences in decoupling contributions of different recombination processes.

Investigation of emission behaviour of perovskite nanocrystals using nano to microspheres of TiO2

The encapsulation of MAPbBr3 perovskites nanocrystals into the pores of TiO2 microspheres (m-TiO2) remarkably enhances the stability and PLQY to 95%.

0D Perovskites: Unique Properties, Synthesis, and Their Applications

0D perovskites have gained much attention in recent years due to their fascinating properties derived from their peculiar structure with isolated metal halide octahedra or metal halide clusters. However, the systematic discussion on the crystal and electronic structure of 0D perovskites to further understand their photophysical characteristics and the comprehensive overview of 0D perovskites for their further applications are still lacking. In this review, the unique crystal and electronic structure of 0D perovskites and their diverse properties are comprehensively analyzed, including large bandgaps, high exciton binding energy, and largely Stokes-shifted broadband emissions from self-trapped excitons. Furthermore, the photoluminescence regulation are discussed. Then, the various synthetic methods for 0D perovskite single crystals, nanocrystals, and thin films are comprehensively summarized. Finally, the emerging applications of 0D perovskites to light-emitting diodes, solar cells, detectors, and some others are illustrated, and the outlook on future research in the field is also provided.

Highly Stable Thin Films Based on Novel Hybrid 1D (PRSH)PbX3 Pseudo-Perovskites

In this study, the structure and morphology, as well as time, ultraviolet radiation, and humidity stability of thin films based on newly developed 1D (PRSH)PbX₃ (X = Br, I) pseudo-perovskite materials, containing 1D chains of face-sharing haloplumbate octahedra, are investigated. All films are strongly crystalline already at room temperature, and annealing does not promote further crystallization or film reorganization. The film microstructure is found to be strongly influenced by the anion type and, to a lesser extent, by the DMF/DMSO solvent volume ratio used during film deposition by spin-coating. Comparison of specular X-ray diffraction and complementary grazing incidence X-ray diffraction analysis indicates that the use of DMF/DMSO mixed solvents promotes the strengthening of a dominant 100 or 210 texturing, as compared the case of pure DMF, and that the haloplumbate chains always lie in a plane parallel to the substrate. Under specific DMF/DMSO solvent volume ratios, the prepared films are found to be highly stable in time (up to seven months under fluxing N₂ and in the dark) and to highly moist conditions (up to 25 days at 78% relative humidity). Furthermore, for representative (PRSH)PbX₃ films, resistance against ultraviolet exposure (λ = 380 nm) is investigated, showing complete stability after irradiation for up to 15 h at a power density of 600 mW/cm². These results make such thin films interesting for highly stable perovskite-based (opto)electronic devices.