Probing transient copper chaperone-Wilson disease protein interactions at the single-molecule level with nanovesicle trapping

Breakdown of Langmuir Adsorption Isotherm in Small Closed Systems

For more than a century, monolayer adsorptions in which adsorbate molecules and adsorbing sites behave ideally have been successfully described by Langmuir's adsorption isotherm. For example, the amount of adsorbed material, as a function of concentration of the material which is not adsorbed, obeys Langmuir's equation. In this paper, we argue that this relation is valid only for macroscopic systems. However, when particle numbers of adsorbate molecules and/or adsorbing sites are small, Langmuir's model fails to describe the chemical equilibrium of the system. This is because the kinetics of forming, or the probability of observing, occupied sites arises from two-body interactions, and as such, ought to include cross-correlations between particle numbers of the adsorbate and adsorbing sites. The effect of these correlations, as reflected by deviations in predicting composition when correlations are ignored, increases with decreasing particle numbers and becomes substantial when only few adsorbate molecules, or adsorbing sites, are present in the system. In addition, any change that augments the fraction of occupied sites at equilibrium (e.g., smaller volume, lower temperature, or stronger adsorption energy) further increases the discrepancy between observed properties of small systems and those predicted by Langmuir's theory. In contrast, for large systems, these cross-correlations become negligible, and therefore when expressing properties involving two-body processes, it is possible to consider independently the concentration of each component. By applying statistical mechanics concepts, we derive a general expression of the equilibrium constant for adsorption. It is also demonstrated that in ensembles in which total numbers of particles are fixed, the magnitudes of fluctuations in particle numbers alone can predict the average chemical composition of the system. Moreover, an alternative adsorption equation, predicting the average fraction of occupied sites from the value of the equilibrium constant, is proposed. All derived relations were tested against results obtained by Monte Carlo simulations.

Strategies for Overcoming the Single-Molecule Concentration Barrier

Fluorescence-based single-molecule approaches have helped revolutionize our understanding of chemical and biological mechanisms. Unfortunately, these methods are only suitable at low concentrations of fluorescent molecules so that single fluorescent species of interest can be successfully resolved beyond background signal. The application of these techniques has therefore been limited to high-affinity interactions despite most biological and chemical processes occurring at much higher reactant concentrations. Fortunately, recent methodological advances have demonstrated that this concentration barrier can indeed be broken, with techniques reaching concentrations as high as 1 mM. The goal of this Review is to discuss the challenges in performing single-molecule fluorescence techniques at high-concentration, offer applications in both biology and chemistry, and highlight the major milestones that shatter the concentration barrier. We also hope to inspire the widespread use of these techniques so we can begin exploring the new physical phenomena lying beyond this barrier.

FRET theoretical predictions concerning freely diffusive dyes inside spherical container: how to choose the best pair?

FRET has been massively used to see if biomolecules were bounded or not by labelling both biomolecules by one dye of a FRET pair. This should give a digital answer to the question (fluorescence of the acceptor: high FRET efficency: molecules associated, fluorescence of the donor: low FRET efficency: molecules dissociated). This has been used, inter alia, at the single-molecule scale in containers, such as liposomes. One perspective of the field is to reduce the container's size to study the effect of confinement on binding. The problem is that if the two dyes are encapsulated inside a small liposome, they could have a significant probability to be close one from the other one (and thus to undergo a high FRET efficiency event without binding). This is why we suggest here a theoretical model which gives mean FRET efficiency as a function of liposome radius (the model applies to any spherical container) and Förster radius to help the experimentalist to choose their experimental set-up. Besides, the influence of side effect on mean FRET efficiency has been studied as well. We show here that if this "background FRET" is most of the time non-quantitative, it can remain significant and which makes data analysis trickier. We could show as well that if this background FRET obviously increases when liposome radius decreases, this variation was lower than the one which could be expected because of side effect. We show as well the FRET efficiency function distribution which let the experimentalist know the probability to get one FRET efficiency value.

Trapping intermediates in metal transfer reactions of the CusCBAF export pump of Escherichia coli

Escherichia coli CusCBAF represents an important class of bacterial efflux pump exhibiting selectivity towards Cu(I) and Ag(I). The complex is comprised of three proteins: the CusA transmembrane pump, the CusB soluble adaptor protein, and the CusC outer-membrane pore, and additionally requires the periplasmic metallochaperone CusF. Here we used spectroscopic and kinetic tools to probe the mechanism of copper transfer between CusF and CusB using selenomethionine labeling of the metal-binding Met residues coupled to RFQ-XAS at the Se and Cu edges. The results indicate fast formation of a protein-protein complex followed by slower intra-complex metal transfer. An intermediate coordinated by ligands from each protein forms in 100 ms. Stopped-flow fluorescence of the capping CusF-W44 tryptophan that is quenched by metal transfer also supports this mechanism. The rate constants validate a process in which shared-ligand complex formation assists protein association, providing a driving force that raises the rate into the diffusion-limited regime.

Single-Vesicle Assays Using Liposomes and Cell-Derived Vesicles: From Modeling Complex Membrane Processes to Synthetic Biology and Biomedical Applications

The plasma membrane is of central importance for defining the closed volume of cells in contradistinction to the extracellular environment. The plasma membrane not only serves as a boundary, but it also mediates the exchange of physical and chemical information between the cell and its environment in order to maintain intra- and intercellular functions. Artificial lipid- and cell-derived membrane vesicles have been used as closed-volume containers, representing the simplest cell model systems to study transmembrane processes and intracellular biochemistry. Classical examples are studies of membrane translocation processes in plasma membrane vesicles and proteoliposomes mediated by transport proteins and ion channels. Liposomes and native membrane vesicles are widely used as model membranes for investigating the binding and bilayer insertion of proteins, the structure and function of membrane proteins, the intramembrane composition and distribution of lipids and proteins, and the intermembrane interactions during exo- and endocytosis. In addition, natural cell-released microvesicles have gained importance for early detection of diseases and for their use as nanoreactors and minimal protocells. Yet, in most studies, ensembles of vesicles have been employed. More recently, new micro- and nanotechnological tools as well as novel developments in both optical and electron microscopy have allowed the isolation and investigation of individual (sub)micrometer-sized vesicles. Such single-vesicle experiments have revealed large heterogeneities in the structure and function of membrane components of single vesicles, which were hidden in ensemble studies. These results have opened enormous possibilities for bioanalysis and biotechnological applications involving unprecedented miniaturization at the nanometer and attoliter range. This review will cover important developments toward single-vesicle analysis and the central discoveries made in this exciting field of research.

Stabilization of Aliphatic Phosphines by Auxiliary Phosphine Sulfides Offers Zeptomolar Affinity and Unprecedented Selectivity for Probing Biological CuI

Full elucidation of the functions and homeostatic pathways of biological copper requires tools that can selectively recognize and manipulate this trace nutrient within living cells and tissues, where it exists primarily as CuI . Buffered at attomolar concentrations, intracellular CuI is, however, not readily accessible to commonly employed amine and thioether-based chelators. Herein, we reveal a chelator design strategy in which phosphine sulfides aid in CuI coordination while simultaneously stabilizing aliphatic phosphine donors, producing a charge-neutral ligand with low-zeptomolar dissociation constant and 1017 -fold selectivity for CuI over ZnII , FeII , and MnII . As illustrated by reversing ATP7A trafficking in cells and blocking long-term potentiation of neurons in mouse hippocampal brain tissue, the ligand is capable of intercepting copper-dependent processes. The phosphine sulfide-stabilized phosphine (PSP) design approach, which confers resistance towards protonation, dioxygen, and disulfides, could be readily expanded towards ligands and probes with tailored properties for exploring CuI in a broad range of biological systems.

Glutathione limits aquacopper(I) to sub-femtomolar concentrations through cooperative assembly of a tetranuclear cluster

The tripeptide glutathione (GSH) is a crucial intracellular reductant and radical scavenger, but it may also coordinate the soft Cu(I) cation and thereby yield pro-oxidant species. The GSH-Cu(I) interaction is thus a key consideration for both redox and copper homeostasis in cells. However, even after nearly four decades of investigation, the nature and stability of the GSH-Cu(I) complexes formed under biologically relevant conditions remain controversial. Here, we revealed the unexpected predominance of a tetranuclear [Cu₄(GS)₆] cluster that is sufficiently stable to limit the effective free aquacopper(I) concentration to the sub-femtomolar regime. Combined spectrophotometric-potentiometric titrations at biologically realistic GSH/Cu(I) ratios, enabled by our recently developed Cu(I) affinity standards and corroborated by low-temperature phosphorescence studies, established cooperative assembly of [Cu₄(GS)₆] as the dominant species over a wide pH range, from 5.5 to 7.5. Our robust model for the glutathione-Cu(I) equilibrium system sets a firm upper limit on the thermodynamic availability of intracellular copper that is 3 orders of magnitude lower than previously estimated. Taking into account their ability to catalyze the production of deleterious superoxide, the formation of Cu(I)-glutathione complexes might be avoided under normal physiological conditions. The actual intracellular Cu(I) availability may thus be regulated a further 3 orders of magnitude below the GSH/Cu(I) affinity limit, consistent with the most recent affinity determinations of Cu(I) chaperones.

Ctr1 Intracellular Loop Is Involved in the Copper Transfer Mechanism to the Atox1 Metallochaperone

Understanding the human copper cycle is essential to understand the role of metals in promoting neurological diseases and disorders. One of the cycles controlling the cellular concentration and distribution of copper involves the copper transporter, Ctr1; the metallochaperone, Atox1; and the ATP7B transporter. It has been shown that the C-terminus of Ctr1, specifically the last three amino acids, HCH, is involved in both copper coordination and the transfer mechanism to Atox1. In contrast, the role of the intracellular loop of Ctr1, which is an additional intracellular segment of Ctr1, in facilitating the copper transfer mechanism has not been investigated yet. Here, we combine various biophysical methods to explore the interaction between this Ctr1 segment and metallochaperone Atox1 and clearly demonstrate that the Ctr1 intracellular loop (1) can coordinate Cu(I) via interactions with the side chains of one histidine and two methionine residues and (2) closely interacts with the Atox1 metallochaperone. Our findings are another important step in elucidating the mechanistic details of the eukaryotic copper cycle.

Single-molecule imaging at high fluorophore concentrations by local activation of dye

Single-molecule fluorescence microscopy is a powerful tool for observing biomolecular interactions with high spatial and temporal resolution. Detecting fluorescent signals from individual labeled proteins above high levels of background fluorescence remains challenging, however. For this reason, the concentrations of labeled proteins in in vitro assays are often kept low compared to their in vivo concentrations. Here, we present a new fluorescence imaging technique by which single fluorescent molecules can be observed in real time at high, physiologically relevant concentrations. The technique requires a protein and its macromolecular substrate to be labeled each with a different fluorophore. Making use of short-distance energy-transfer mechanisms, only the fluorescence from those proteins that bind to their substrate is activated. This approach is demonstrated by labeling a DNA substrate with an intercalating stain, exciting the stain, and using energy transfer from the stain to activate the fluorescence of only those labeled DNA-binding proteins bound to the DNA. Such an experimental design allowed us to observe the sequence-independent interaction of Cy5-labeled interferon-inducible protein 16 with DNA and the sliding via one-dimensional diffusion of Cy5-labeled adenovirus protease on DNA in the presence of a background of hundreds of nanomolar Cy5 fluorophore.

Optically Modulated Photoswitchable Fluorescent Proteins Yield Improved Biological Imaging Sensitivity

Photoswitchable fluorescent proteins (PS-FPs) open grand new opportunities in biological imaging. Through optical manipulation of FP emission, we demonstrate that dual-laser modulated synchronously amplified fluorescence image recovery (DM-SAFIRe) improves signal contrast in high background through unambiguous demodulation and is linear in relative fluorophore abundance at different points in the cell. The unique bright-to-dark state interconversion rates of each PS-FP not only enables discrimination of different, yet spectrally indistinguishable FPs, but also allows signal rejection of diffusing relative to bound forms of the same PS-FP, rsFastLime. Adding to the sensitivity gains realized from rejecting non-modulatable background, the selective signal recovery of immobilized vs diffusing intracellular rsFastLime suggests that DM-SAFIRe can detect weak protein-protein interactions that are normally obscured by large fractions of unbound FPs.

Extracting physics of life at the molecular level: A review of single-molecule data analyses

Studying individual biomolecules at the single-molecule level has proved very insightful recently. Single-molecule experiments allow us to probe both the equilibrium and nonequilibrium properties as well as make quantitative connections with ensemble experiments and equilibrium thermodynamics. However, it is important to be careful about the analysis of single-molecule data because of the noise present and the lack of theoretical framework for processes far away from equilibrium. Biomolecular motion, whether it is free in solution, on a substrate, or under force, involves thermal fluctuations in varying degrees, which makes the motion noisy. In addition, the noise from the experimental setup makes it even more complex. The details of biologically relevant interactions, conformational dynamics, and activities are hidden in the noisy single-molecule data. As such, extracting biological insights from noisy data is still an active area of research. In this review, we will focus on analyzing both fluorescence-based and force-based single-molecule experiments and gaining biological insights at the single-molecule level. Inherently nonequilibrium nature of biological processes will be highlighted. Simulated trajectories of biomolecular diffusion will be used to compare and validate various analysis techniques.

Shedding light on protein folding landscapes by single-molecule fluorescence

Single-molecule (SM) fluorescence methods have been increasingly instrumental in our current understanding of a number of key aspects of protein folding and aggregation landscapes over the past decade. With the advantage of a model free approach and the power of probing multiple subpopulations and stochastic dynamics directly in a heterogeneous structural ensemble, SM methods have emerged as a principle technique for studying complex systems such as intrinsically disordered proteins (IDPs), globular proteins in the unfolded basin and during folding, and early steps of protein aggregation in amyloidogenesis. This review highlights the application of these methods in investigating the free energy landscapes, folding properties and dynamics of individual protein molecules and their complexes, with an emphasis on inherently flexible systems such as IDPs.

Probing the structural flexibility of the human copper metallochaperone Atox1 dimer and its interaction with the CTR1 c-terminal domain

Both the essentiality and the toxicity of copper in human, yeast, and bacteria cells require precise mechanisms for acquisition, intimately linked to controlled distribution, which have yet to be fully understood. This work explores one aspect in the copper cycle, by probing the interaction between the human copper chaperone Atox1 and the c-terminal domain of the copper transporter, CTR1, using electron paramagnetic resonance (EPR) spectroscopy and circular dichroism (CD). The data collected here shows that the Atox1 keeps its dimer nature also in the presence of the CTR1 c-terminal domain; however, two geometrical states are assumed by the Atox1. One is similar to the geometrical state reported by the crystal structure, while the latter has not yet been constructed. In the presence of the CTR1 c-terminal domain, both states are assumed; however, the structure of Atox1 is more restricted in the presence of the CTR1 c-terminal domain. This study also shows that the last three amino acids of the CTR1 c-terminal domain, HCH, are important for maintaining the crystal structure of the Atox1, allowing less structural flexibility and improved thermal stability of Atox1.

High-throughput single-molecule studies of protein-DNA interactions

Fluorescence and force-based single-molecule studies of protein-nucleic acid interactions continue to shed critical insights into many aspects of DNA and RNA processing. As single-molecule assays are inherently low-throughput, obtaining statistically relevant datasets remains a major challenge. Additionally, most fluorescence-based single-molecule particle-tracking assays are limited to observing fluorescent proteins that are in the low-nanomolar range, as spurious background signals predominate at higher fluorophore concentrations. These technical limitations have traditionally limited the types of questions that could be addressed via single-molecule methods. In this review, we describe new approaches for high-throughput and high-concentration single-molecule biochemical studies. We conclude with a discussion of outstanding challenges for the single-molecule biologist and how these challenges can be tackled to further approach the biochemical complexity of the cell.

Emerging novel concept of chaperone therapies for protein misfolding diseases

Chaperone therapy is a newly developed molecular therapeutic approach to protein misfolding diseases. Among them we found unstable mutant enzyme proteins in a few lysosomal diseases, resulting in rapid intracellular degradation and loss of function. Active-site binding low molecular competitive inhibitors (chemical chaperones) paradoxically stabilized and enhanced the enzyme activity in somatic cells by correction of the misfolding of enzyme protein. They reached the brain through the blood-brain barrier after oral administration, and corrected pathophysiology of the disease. In addition to these inhibitory chaperones, non-competitive chaperones without inhibitory bioactivity are being developed. Furthermore molecular chaperone therapy utilizing the heat shock protein and other chaperone proteins induced by small molecules has been experimentally tried to handle abnormally accumulated proteins as a new approach particularly to neurodegenerative diseases. These three types of chaperones are promising candidates for various types of diseases, genetic or non-genetic, and neurological or non-neurological, in addition to lysosomal diseases.

Single-molecule dynamics and mechanisms of metalloregulators and metallochaperones

Understanding how cells regulate and transport metal ions is an important goal in the field of bioinorganic chemistry, a frontier research area that resides at the interface of chemistry and biology. This Current Topic reviews recent advances from the authors' group in using single-molecule fluorescence imaging techniques to identify the mechanisms of metal homeostatic proteins, including metalloregulators and metallochaperones. It emphasizes the novel mechanistic insights into how dynamic protein-DNA and protein-protein interactions offer efficient pathways via which MerR-family metalloregulators and copper chaperones can fulfill their functions. This work also summarizes other related single-molecule studies of bioinorganic systems and provides an outlook toward single-molecule imaging of metalloprotein functions in living cells.

Single vesicle biochips for ultra-miniaturized nanoscale fluidics and single molecule bioscience

One of the major bottlenecks in the development of biochips is maintaining the structure and function of biomolecules when interfacing them with hard matter (glass, plastics, metals, etc.), a challenge that is exacerbated during miniaturization that inevitably increases the interface to volume ratio of these devices. Biochips based on immobilized vesicles circumvent this problem by encapsulating biomolecules in the protective environment of a lipid bilayer, thus minimizing interactions with hard surfaces. Here we review the development of biochips based on arrays of single nanoscale vesicles, their fabrication via controlled self-assembly, and their characterization using fluorescence microscopy. We also highlight their applications in selected fields such as nanofluidics and single molecule bioscience. Despite their great potential for improved biocompatibility, extreme miniaturization and high throughput, single vesicle biochips are still a niche technology that has yet to establish its commercial relevance.

Breaking the concentration limit of optical single-molecule detection

Over the last decade, single-molecule detection has been successfully utilized in the life sciences and materials science. Yet, single-molecule measurements only yield meaningful results when working in a suitable, narrow concentration range. On the one hand, diffraction limits the minimal size of the observation volume in optical single-molecule measurements and consequently a sample must be adequately diluted so that only one molecule resides within the observation volume. On the other hand, at ultra-low concentrations relevant for sensing, the detection volume has to be increased in order to detect molecules in a reasonable timespan. This in turn results in the loss of an optimal signal-to-noise ratio necessary for single-molecule detection. This review discusses the requirements for effective single-molecule fluorescence applications, reflects on the motivation for the extension of the dynamic concentration range of single-molecule measurements and reviews various approaches that have been introduced recently to solve these issues. For the high-concentration limit, we identify four promising strategies including molecular confinement, optical observation volume reduction, temporal separation of signals and well-conceived experimental designs that specifically circumvent the high concentration limit. The low concentration limit is addressed by increasing the measurement speed, parallelization, signal amplification and preconcentration. The further development of these ideas will expand our possibilities to interrogate research questions with the clarity and precision provided only by the single-molecule approach.

Making connections--strategies for single molecule fluorescence biophysics

•

The single-molecule approach yields exciting insights for many biomolecular applications.

•

There are significant challenges to achieve main-stream single-molecule measurements.

•

New labelling chemistries enable multiple tagged molecules in vitro and in live cells.

•

Single-molecule pull-down expands the toolbox complementing co-immunoprecipitation.

•

Breaking the single-molecule concentration barrier is within reach.

Fluorescence spectroscopy and fluorescence microscopy carried out on the single molecule level are elegant methods to decipher complex biological systems; it can provide a wealth of information that frequently is obscured in the averaging of ensemble measurements. Fluorescence can be used to localise a molecule, study its binding with interaction partners and ligands, or to follow conformational changes in large multicomponent systems. Efficient labelling of proteins and nucleic acids is very important for any fluorescence method, and equally the development of novel fluorophores has been crucial in making biomolecules amenable to single molecule fluorescence methods. In this paper we review novel coupling strategies that permit site-specific and efficient labelling of proteins. Furthermore, we will discuss progressive single molecule approaches that allow the detection of individual molecules and biomolecular complexes even directly isolated from cellular extracts at much higher and much lower concentrations than has been possible so far.

Single-molecule nanometry for biological physics

Precision measurement is a hallmark of physics but the small length scale (∼nanometer) of elementary biological components and thermal fluctuations surrounding them challenge our ability to visualize their action. Here, we highlight the recent developments in single-molecule nanometry where the position of a single fluorescent molecule can be determined with nanometer precision, reaching the limit imposed by the shot noise, and the relative motion between two molecules can be determined with ∼0.3 nm precision at ∼1 ms time resolution, as well as how these new tools are providing fundamental insights into how motor proteins move on cellular highways. We will also discuss how interactions between three and four fluorescent molecules can be used to measure three and six coordinates, respectively, allowing us to correlate the movements of multiple components. Finally, we will discuss recent progress in combining angstrom-precision optical tweezers with single-molecule fluorescent detection, opening new windows for multi-dimensional single-molecule nanometry for biological physics.

Dynamic multibody protein interactions suggest versatile pathways for copper trafficking

As part of intracellular copper trafficking pathways, the human copper chaperone Hah1 delivers Cu(+) to the Wilson's Disease Protein (WDP) via weak and dynamic protein-protein interactions. WDP contains six homologous metal binding domains (MBDs) connected by flexible linkers, and these MBDs all can receive Cu(+) from Hah1. The functional roles of the MBD multiplicity in Cu(+) trafficking are not well understood. Building on our previous study of the dynamic interactions between Hah1 and the isolated fourth MBD of WDP, here we study how Hah1 interacts with MBD34, a double-domain WDP construct, using single-molecule fluorescence resonance energy transfer (smFRET) combined with vesicle trapping. By alternating the positions of the smFRET donor and acceptor, we systematically probed Hah1-MBD3, Hah1-MBD4, and MBD3-MBD4 interaction dynamics within the multidomain system. We found that the two interconverting interaction geometries were conserved in both intermolecular Hah1-MBD and intramolecular MBD-MBD interactions. The Hah1-MBD interactions within MBD34 are stabilized by an order of magnitude relative to the isolated single-MBDs, and thermodynamic and kinetic evidence suggest that Hah1 can interact with both MBDs simultaneously. The enhanced interaction stability of Hah1 with the multi-MBD system, the dynamic intramolecular MBD-MBD interactions, and the ability of Hah1 to interact with multiple MBDs simultaneously suggest an efficient and versatile mechanism for the Hah1-to-WDP pathway to transport Cu(+).

A rule of seven in Watson-Crick base-pairing of mismatched sequences

Sequence recognition through base pairing is essential for DNA repair and gene regulation but the basic rules governing this process remain elusive. In particular, the kinetics of annealing between two imperfectly matched strands is not well characterized despite its potential importance in nucleic acids-based biotechnologies and gene silencing. Here we use single molecule fluorescence to visualize the multiple annealing and melting reactions of two untethered strands inside a porous vesicle, allowing us to quantify precisely the annealing and melting rates. The data as a function of mismatch position suggest that seven contiguous base pairs are needed for rapid annealing of DNA and RNA. This phenomenological rule of seven may underlie the requirement of seven nucleotides complementarity to seed gene silencing by small non-coding RNA and may help guide performance improvement in DNA and RNA-based bio- and nano-technologies where off-target effects can be detrimental.

Allosteric inhibition of individual enzyme molecules trapped in lipid vesicles

Enzymatic inhibition by product molecules is an important and widespread phenomenon. We describe an approach to study product inhibition at the single-molecule level. Individual HRP molecules are trapped within surface-tethered lipid vesicles, and their reaction with a fluorogenic substrate is probed. While the substrate readily penetrates into the vesicles, the charged product (resorufin) gets trapped and accumulates inside the vesicles. Surprisingly, individual enzyme molecules are found to stall when a few tens of product molecules accumulate. Bulk enzymology experiments verify that the enzyme is noncompetitively inhibited by resorufin. The initial reaction velocity of individual enzyme molecules and the number of product molecules required for their complete inhibition are broadly distributed and dynamically disordered. The two seemingly unrelated parameters, however, are found to be substantially correlated with each other in each enzyme molecule and over long times. These results suggest that, as a way to counter disorder, enzymes have evolved the means to correlate fluctuations at structurally distinct functional sites.

Single-molecule fluorescence spectroscopy maps the folding landscape of a large protein

Proteins attain their function only after folding into a highly organized three-dimensional structure. Much remains to be learned about the mechanisms of folding of large multidomain proteins, which may populate metastable intermediate states on their energy landscapes. Here we introduce a novel method, based on high-throughput single-molecule fluorescence experiments, which is specifically geared towards tracing the dynamics of folding in the presence of a plethora of intermediates. We employ this method to characterize the folding reaction of a three-domain protein, adenylate kinase. Using thousands of single-molecule trajectories and hidden Markov modelling, we identify six metastable states on adenylate kinase's folding landscape. Remarkably, the connectivity of the intermediates depends on denaturant concentration; at low concentration, multiple intersecting folding pathways co-exist. We anticipate that the methodology introduced here will find broad applicability in the study of folding of large proteins, and will provide a more realistic scenario of their conformational dynamics.

Relating dynamic protein interactions of metallochaperones with metal transfer at the single-molecule level

Metallochaperones undertake specific interactions with their target proteins to deliver metal ions inside cells. Understanding how these protein interactions are coupled with the underlying metal transfer process is important, but challenging because they are weak and dynamic. Here we use a nanovesicle trapping scheme to enable single-molecule FRET measurements of the weak, dynamic interactions between the copper chaperone Hahl and the fourth metal binding domain (MBD4) of WDP. By monitoring the behaviors of single interacting pairs, we visualize their interactions in real time in both the absence and the presence of various equivalents of Cu(1+). Regardless of the proteins' metallation state, we observe multiple, interconverting interaction complexes between Hah1 and MBD4. Within our experimental limit, the overall interaction geometries of these complexes appear invariable, but their stabilities are dependent on the proteins' metallation state. In apo-holo Hah1-MBD4 interactions, the complexes are stabilized relative to that observed in the apo-apo interactions. This stabilization is indiscernible when Hah1's Cu(1+)-binding is eliminated or when both proteins have Cu(1+) loaded. The nature of this Cu(1+)-induced complex stabilization and of the interaction complexes are discussed. These Cu(1+)-induced effects on the Hah1-MBD4 interactions provide a step toward understanding how the dynamic protein interactions of copper chaperones are coupled with their metal transfer function.

Structural landscape of isolated agonist-binding domains from single AMPA receptors

α-amino-3-hydroxy-5-methyl-4-isoxazole propionate (AMPA) receptors mediate fast excitatory neurotransmission by converting chemical signals into electrical signals. Thus, it is important to understand the relationship between their chemical biology and their function. Single molecule fluorescence resonance energy transfer (smFRET) was used to examine the conformations explored by the agonist binding domain of the AMPA receptor for wild type and T686 mutant proteins. Each form of the agonist binding domain exhibited a dynamic, multi-state sequential equilibrium, which could only be identified using wavelet shrinkage, a signal processing technique that removes experimental shot-noise. These results illustrate that the extent of activation is dependent not on a rigid closed cleft, but instead on the probability that a given subunit will occupy a closed cleft conformation, which in turn is not only determined by the lowest energy state but by the range of states that the protein explores.

Visualizing the metal-binding versatility of copper trafficking sites

Molecular systems have evolved to permit the safe delivery of copper. Despite extensive studies, many copper site structures involved in copper homeostasis, even for the well-studied metallochaperone Atx1, remain unresolved. Cyanobacteria import copper to their thylakoid compartments for use in photosynthesis and respiration and possess an Atx1 that we show can adopt multiple oligomeric states when metalated, capable of binding up to four copper ions. Two-copper- and four-copper-loaded dimers exist in solution at low micromolar concentrations, and head-to-head and side-to-side arrangements, respectively, can be crystallized, with the latter binding a [Cu(4){mu(2)-S(gamma)(Cys)}(4)Cl(2)](2-) cluster. The His61Tyr mutation on loop 5 weakens head-to-head dimerization, yet a side-to-side dimer binding a similar cluster as in the wild-type protein, but with phenolate coordination, is present. The cognate metal-binding domains (MBDs) of the P-type ATPases CtaA and PacS, which are proposed to donate copper to and accept copper from Atx1, respectively, are monomeric in the presence of copper. The structure of the MBD of Cu(I)-PacS shows a crystallographic trimer arrangement around a [Cu(3){mu(2)-S(gamma)(Cys)}(3){S(gamma)(Cys)}(3)](2-) cluster that is very similar to that found for an alternate form of the His61Tyr Atx1 mutant. Copper transfer from the MBD of CtaA to Atx1 is favorable, but delivery from Atx1 to the MBD of PacS is strongly dependent upon the dimeric form of Atx1. A copper-induced switch in Atx1 dimer structure may have a regulatory role with cluster formation helping to buffer copper.

Temperature-independent porous nanocontainers for single-molecule fluorescence studies

In this work, we demonstrate the capability of using lipid vesicles biofunctionalized with protein channels to perform single-molecule fluorescence measurements over a biologically relevant temperature range. Lipid vesicles can serve as an ideal nanocontainer for single-molecule fluorescence measurements of biomacromolecules. One serious limitation of the vesicle encapsulation method has been that the lipid membrane is practically impermeable to most ions and small molecules, limiting its application to observing reactions in equilibrium with the initial buffer condition. To permeabilize the barrier, Staphylococcus aureus toxin α-hemolysin (aHL) channels have been incorporated into the membrane. These aHL channels have been characterized using single-molecule fluorescence resonance energy transfer signals from vesicle-encapsulated guanine-rich DNA that folds in a G-quadruplex motif as well as from the Rep helicase-DNA system. We show that these aHL channels are permeable to monovalent ions and small molecules, such as ATP, over the biologically relevant temperature range (17-37 °C). Ions can efficiently pass through preformed aHL channels to initiate DNA folding without any detectable delay. With addition of the cholesterol to the membrane, we also report a 35-fold improvement in the aHL channel formation efficiency, making this approach more practical for wider applications. Finally, the temperature-dependent single-molecule enzymatic study inside these nanocontainers is demonstrated by measuring the Rep helicase repetitive shuttling dynamics along a single-stranded DNA at various temperatures. The permeability of the biofriendly nanocontainer over a wide range of temperature would be effectively applied to other surface-based high-throughput measurements and sensors beyond the single-molecule fluorescence measurements.

Trapping single molecules in liposomes: surface interactions and freeze-thaw effects

We report on an improved method to encapsulate proteins and other macromolecules inside surface-tethered liposomes to reduce or eliminate environmental interference for single-molecule investigations. These lipid vesicles are large enough for the molecule to experience free diffusion but sufficiently small so that the molecule appears effectively immobile under the fluorescence microscope. Single-molecule fluorescence experiments were used to characterize this anchoring method relative to direct immobilization via biotin-streptavidin linkers. Multidimensional histograms of intensity, polarization, and lifetime revealed that molecules trapped in liposomes display a narrow distribution around a single peak, while the molecules directly immobilized on surface show highly dispersed values for all parameters. By hydrating the lipid film at low volumes, high encapsulation efficiencies can be achieved with ~10 times less biological material than previous protocols. We measured vesicle size distributions and found no significant advantage for using freeze-thaw cycles during vesicle preparation. On the contrary, the temperature jump can induce irreversible damage of fluorophores and it reduces significantly the functionality of proteins, as demonstrated on single-molecule binding experiments on STAT3. Our improved and biologically gentle molecule encapsulation protocol has a great potential for widespread applications in single-molecule fluorescence spectroscopy.

Single-molecule FRET of protein-nucleic acid and protein-protein complexes: surface passivation and immobilization

Single-molecule fluorescence spectroscopy reveals the real time dynamics that occur during biomolecular interactions that would otherwise be hidden by the ensemble average. It also removes the requirement to synchronize reactions, thus providing a very intuitive approach to study kinetics of biological systems. Surface immobilization is commonly used to increase observation times to the minute time scale, but it can be detrimental if the sample interacts non-specifically with the surface. Here, we review detailed protocols to prevent such interactions by passivating the surface or by trapping the molecules inside surface immobilized lipid vesicles. Finally, we discuss recent examples where these methods were applied to study the dynamics of important cellular processes at the single-molecule level.

Copper-transfer mechanism from the human chaperone Atox1 to a metal-binding domain of Wilson disease protein

The molecular details of how copper (Cu) is transferred from the human Cu chaperone Atox1 to metal-binding domains (MBDs) of P(1B)-type ATPases are still unclear. Here, we use a computational approach, employing quantum mechanics/molecular mechanics (QM/MM) methods, to shed light on the reaction mechanism [probable intermediates, Cu(I) coordination geometries, activation barriers, and energetics] of Cu(I) transfer from Atox1 to the fourth MBD of Wilson disease protein (WD4). Both Atox1 and WD4 have solvent-exposed metal-binding motifs with two Cys residues that coordinate Cu(I). After assessing the existence of all possible 2-, 3- and 4-coordinate Cu-intermediate species, one dominant reaction path emerged. First, without activation barrier, WD4's Cys1 binds Cu(I) in Atox1 to form a 3-coordinated intermediate. Next, with an activation barrier of about 9.5 kcal/mol, a second 3-coordinated intermediate forms that involves both of the Cys residues in WD4 and Cys1 of Atox1. This species can then form the product by decoordination of Atox1's Cys1 (barrier of about 8 kcal/mol). Overall, the Cu-transfer reaction from Atox1 to WD4 appears to be kinetically accessible but less energetically favorable (DeltaE = 7.7 kcal/mol). Our results provide unique insights into the molecular mechanism of protein-mediated Cu(I) transfer in the secretory pathway and are in agreement with existing experimental data.

Tackling metal regulation and transport at the single-molecule level

To maintain normal metal metabolism, organisms utilize dynamic cooperation of many biomacromolecules for regulating metal ion concentrations and bioavailability. How these biomacromolecules work together to achieve their functions is largely unclear. For example, how do metalloregulators and DNA interact dynamically to control gene expression to maintain healthy cellular metal level? And how do metal transporters collaborate dynamically to deliver metal ions? Here we review recent advances in studying the dynamic interactions of macromolecular machineries for metal regulation and transport at the single-molecule level: (1) The development of engineered DNA Holliday junctions as single-molecule reporters for metalloregulator-DNA interactions, focusing onMerR-family regulators. And (2) The development of nanovesicle trapping coupled with single molecule fluorescence resonance energy transfer (smFRET) for studying weak, transient interactions between the copper chaperone Hah1 and the Wilson disease protein. We describe the methodologies,the information content of the single-molecule results, and the insights into the biological functions of the involved biomacromolecules for metal regulation and transport. We also discuss remaining challenges from our perspective.

Single molecule nanocontainers made porous using a bacterial toxin

Encapsulation of a biological molecule or a molecular complex in a vesicle provides a means of biofriendly immobilization for single molecule studies and further enables new types of analysis if the vesicles are permeable. We previously reported on using DMPC (dimyristoylphosphatidylcholine) vesicles for realizing porous bioreactors. Here, we describe a different strategy for making porous vesicles using a bacterial pore-forming toxin, α-hemolysin. Using RNA folding as a test case, we demonstrate that protein-based pores can allow exchange of magnesium ions through the vesicle wall while keeping the RNA molecule inside. Flow measurements indicate that the encapsulated RNA molecules rapidly respond to the change in the outside buffer condition. The approach was further tested by coencapsulating a helicase protein and its single-stranded DNA track. The DNA translocation activity of E. coli Rep helicase inside vesicles was fueled by ATP provided outside the vesicle, and a dramatically higher number of translocation cycles could be observed due to the minuscule vesicle volume that facilitates rapid rebinding after dissociation. These pores are known to be stable over a wide range of experimental conditions, especially at various temperatures, which is not possible with the previous method using DMPC vesicles. Moreover, engineered mutants of the utilized toxin can potentially be exploited in the future applications.

Nanovesicle trapping for studying weak protein interactions by single-molecule FRET

Protein-protein interactions are fundamental biological processes. While strong protein interactions are amenable to many characterization techniques including crystallography, weak protein interactions are challenging to study because of their dynamic nature. Single-molecule fluorescence resonance energy transfer (smFRET) can monitor dynamic protein interactions in real time, but are generally limited to strong interacting pairs because of the low concentrations needed for single-molecule detection. Here, we describe a nanovesicle trapping approach to enable smFRET study of weak protein interactions at high effective concentrations. We describe the experimental procedures, summarize the application in studying the weak interactions between intracellular copper transporters, and detail the single-molecule kinetic analysis of bimolecular interactions involving three states. Both the experimental approach and the theoretical analysis are generally applicable to studying many other biological processes at the single-molecule level.

A practical guide to single-molecule FRET

Single-molecule fluorescence resonance energy transfer (smFRET) is one of the most general and adaptable single-molecule techniques. Despite the explosive growth in the application of smFRET to answer biological questions in the last decade, the technique has been practiced mostly by biophysicists. We provide a practical guide to using smFRET, focusing on the study of immobilized molecules that allow measurements of single-molecule reaction trajectories from 1 ms to many minutes. We discuss issues a biologist must consider to conduct successful smFRET experiments, including experimental design, sample preparation, single-molecule detection and data analysis. We also describe how a smFRET-capable instrument can be built at a reasonable cost with off-the-shelf components and operated reliably using well-established protocols and freely available software.