Supertwistacene: A Helical Graphene Nanoribbon

Tether-entangled conjugated helices

A new design concept, tether-entangled conjugated helices (TECHs), is introduced for helical polyaromatic molecules. TECHs consist of a linear polyaromatic ladder backbone and periodically entangling tethers with the same planar chirality. By limiting the length of tether, all tethers synchronously bend and twist the backbone with the same manner, and change it into a helical ribbon with a determinate helical chirality. The 3D helical features are customizable via modular synthesis by using two types of synthons, the planar chiral tethering unit (C 2 symmetry) and the docking unit (C 2h symmetry), and no post chiral resolution is needed. Moreover, TECHs possess persistent chiral properties due to the covalent locking of helical configuration by tethers. Concave-type and convex-type oligomeric TECHs are prepared as a proof-of-concept. Unconventional double-helix π-dimers are observed in the single crystals of concave-type TECHs. Theoretical studies indicate the smaller binding energies in double-helix π-dimers than conventional planar π-dimers. A concentration-depend emission is found for concave-type TECHs, probably due to the formation of double-helix π-dimers in the excited state. All TECHs show strong circularly polarized luminescence (CPL) with dissymmetric factors (|g lum|) generally over 10-3. Among them, the (P)-T4-tBu shows the highest |g lum| of 1.0 × 10-2 and a high CPL brightness of 316 M-1 cm-1.

W-Shaped π-Extended Double Undecabenzo[7]helicene

A chiral W-shaped fully π-extended double [7]helicene (ED7H) has been synthesized and fully characterized. It displays fluorescence emission (λem = 636 nm) with a quantum yield (Φf) of 0.10. In comparison to its X-shaped and monomict π-extended [7]helicene analogues, enantiopure W-shaped ED7H exhibited superior chiral optical characteristics, including distinct circular dichroism signals from 400 to 650 nm, a good dissymmetric emission factor |glum| of 4 × 10-3, and a circularly polarized luminescence brightness value BCPL of 42 M-1 cm-1.

Nonplanar Nanographene with a Large Conjugated π-Surface

Conjugated π-surfaces are ubiquitous in molecules and materials. However, large π-surfaces up to a few nanometers in size are difficult to construct in an atomically precise manner. They tend to aggregate because of strong π-π interactions, resulting in notorious problems for both purification and spectroscopic investigations. Here, by contrast, we report the design, synthesis, and full characterizations of a nonplanar nanographene 1, which has a large, precise, and nonstacked π-surface. It is soluble in common organic solvents and allows for thorough investigations. The structure of 1, comprising 85 fused rings with an extended π-surface of 3 nm in size, is unambiguously confirmed by single-crystal X-ray diffraction. Unusual electronic structures, record-high near-infrared absorption, pronounced magnetic shielding, and ultrastrong heteromolecular van der Waals complexations are demonstrated, enabling us to establish a clear structure-property relationship, which has been elusive for decades. These results have broad implications for studying and understanding various phenomena and processes relevant to both discrete and interacting π-surfaces.

A Double Twisted Nanographene with a Contorted Pyrene Core

The mature synthetic methodologies enable us to rationally design and produce chiral nanographenes (NGs), most of which consist of multiple helical motifs. However, inherent chirality originating from twisted geometry has just emerged to be employed in chiral NGs. Herein, we report a red-emissive chiral NG constituted of orthogonally arranged two-fold twisted π-skeletons at a contorted pyrene core which contributes to optical transitions of S0→S1 and vice versa. The thus-obtained NG exhibited a robustness on its redox properties through 2e- uptake/release. The chemical oxidation generated stable radical cation whose absorption covers near-infrared I and II regions. Overall, the contorted pyrene core governs electronic nature of the chiral NG. The twist operation on NGs would be, therefore, a design strategy to alter conventional chirality induction on NGs.

Boron-doped double [6]carbohelicenes: a combination of helicene and boron-doped π-systems

Helicenes, featuring unique helical structures, have a long history as three-dimensional polycyclic aromatic hydrocarbons (PAHs). Incorporation of heteroatoms into helicenes may alter their electronic structures and achieve unexpected physical properties. Here, we disclose fusion of boron-doped π-systems onto helicenes as an efficient strategy to design boron-doped carbohelicenes. Two boron-doped double [6]carbohelicenes were synthesized, which possess the C58B2 and C86B2 polycyclic π-skeletons containing two [6]helicene subunits, respectively. The C86B2 molecule thus represents the largest-size helicene-based boron-doped PAH. A thorough investigation reveals that the helicene moieties and boron atoms endow the polycyclic π-systems with delocalized electronic structures, and well-tunable ground-state and excited-state photophysical properties. It is notable that the C58B2 molecule displays excited-state stimulated emission behavior and amplified spontaneous emission (ASE) properties in not only the blend films with various doped concentrations but also the pure film. To our knowledge, it is the first example of ASE-active [n]helicene (n ≥ 6), and moreover, such robust ASE performance has rarely been observed in PAHs, demonstrating the promising utility of boron-doped carbohelicenes for laser materials.

Helically twisted nanoribbons via stereospecific annulative π-extension reaction employing [7]helicene as a molecular wrench

Over the past decade, significant progress has been made in synthesizing atomically precise carbon nanostructures, particularly graphene nanoribbons (NRs), employing advanced synthetic methodologies. Despite these advancements, achieving control over the stereochemistry of twisted NRs has proven to be a formidable challenge. This manuscript presents a strategic approach to achieve absolute control over the single-handed helical conformation in a cove-edged NR. This strategy leverages enantiopure helicenes as a molecular wrench, intricately influencing the overall conformation of the NR. [7]helicenes stitched to the terminal K-regions of a conjugated pyrene NR through a stereospecific annulative π-extension reaction to produce a helically twisted NR with an end-to-end twist of 171°. Furthermore, a detailed investigation of the impact of twisting on the conformational population was studied by quantum chemical calculations.

Helically Chiral π-Expanded Azocines Through Regioselective Beckmann Rearrangement and Their Charged States

We report a synthetic approach to π-expanded [6]helicenes incorporating tropone and azocine units in combination with a 5-membered ring, which exhibit intriguing structural, electronic, and chiroptical properties. The regioselective Beckmann rearrangement allows the isolation of helical scaffolds containing 8-membered lactam, azocine, and amine units. As shown by X-ray crystallographic analysis, the incorporation of tropone or azocine units leads to highly distorted [6]helicene moieties, with distinct packing motifs in the solid state. The compounds exhibit promising optoelectronic properties with considerable photoluminescence quantum yields and tunable emission wavelengths depending on the relative position of the nitrogen center within the polycyclic framework. Separation of the enantiomers by chiral high-performance liquid chromatography (HPLC) allowed characterization of their chiroptical properties by circular dichroism (CD) and circularly polarized luminescence (CPL) spectroscopy. The azocine compounds feature manifold redox chemistry, allowing for the characterization of the corresponding radical anions and cations as well as the dications and dianions, with near-infrared (NIR) absorption bands extending beyond 3000 nm. Detailed theoretical studies provided insights into the aromaticity evolution upon reduction and oxidation, suggesting that the steric strain prevents the azocine unit from undergoing aromatization, while the indene moiety dominates the observed redox chemistry.

Porphyrin-fused graphene nanoribbons

Graphene nanoribbons (GNRs), nanometre-wide strips of graphene, are promising materials for fabricating electronic devices. Many GNRs have been reported, yet no scalable strategies are known for synthesizing GNRs with metal atoms and heteroaromatic units at precisely defined positions in the conjugated backbone, which would be valuable for tuning their optical, electronic and magnetic properties. Here we report the solution-phase synthesis of a porphyrin-fused graphene nanoribbon (PGNR). This PGNR has metalloporphyrins fused into a twisted fjord-edged GNR backbone; it consists of long chains (>100 nm), with a narrow optical bandgap (~1.0 eV) and high local charge mobility (>400 cm2 V-1 s-1 by terahertz spectroscopy). We use this PGNR to fabricate ambipolar field-effect transistors with appealing switching behaviour, and single-electron transistors displaying multiple Coulomb diamonds. These results open an avenue to π-extended nanostructures with engineerable electrical and magnetic properties by transposing the coordination chemistry of porphyrins into graphene nanoribbons.

Biomimetic Chiral Nanomaterials with Selective Catalysis Activity

Chiral nanomaterials with unique chiral configurations and biocompatible ligands have been booming over the past decade for their interesting chiroptical effect, unique catalytical activity, and related bioapplications. The catalytic activity and selectivity of chiral nanomaterials have emerged as important topics, that can be potentially controlled and optimized by the rational biochemical design of nanomaterials. In this review, chiral nanomaterials synthesis, composition, and catalytic performances of different biohybrid chiral nanomaterials are discussed. The construction of chiral nanomaterials with multiscale chiral geometries along with the underlying principles for enhancing chiroptical responses are highlighted. Various biochemical approaches to regulate the selectivity and catalytic activity of chiral nanomaterials for biocatalysis are also summarized. Furthermore, attention is paid to specific chiral ligands, materials compositions, structure characteristics, and so on for introducing selective catalytic activities of representative chiral nanomaterials, with emphasis on substrates including small molecules, biological macromolecule, and in-site catalysis in living systems. Promising progress has also been emphasized in chiral nanomaterials featuring structural versatility and improved chiral responses that gave rise to unprecedented chances to utilize light for biocatalytic applications. In summary, the challenges, future trends, and prospects associated with chiral nanomaterials for catalysis are comprehensively proposed.

Axially Chiral Nonbenzenoid Nanographene with Second Harmonic Generation Property

Chiral nanographenes (NGs) have garnered significant interest as optoelectronic materials in recent years. While helically chiral NGs have been extensively studied, axially chiral NGs have only witnessed limited examples, with no prior reports of axially chiral nonbenzenoid NGs. Herein we report an axially chiral nonbenzenoid nanographene featuring six pentagons and four heptagons. This compound, denoted as 2, was efficiently synthesized via an efficient Pd-catalyzed aryl silane homocoupling reaction. The presence of two bulky 3,5-di-tert-butylphenyl groups around the axis connecting the two nonbenzenoid PAH (AHR) segments endows 2 with atropisomeric chirality and high racemization energy barrier, effectively preventing racemization of both R- and S-enantiomers at room temperature. Optically pure R-2 and S-2 were obtained by chiral HPLC separation, and they exhibit circular dichroism (CD) activity at wavelengths up to 660 nm, one of the longest wavelengths with CD responses reported for the chiral NGs. Interestingly, racemic 2 forms a homoconfiguration π-dimer in the crystal lattice, belonging to the I222 chiral space group. Consequently, this unique structure renders crystals of 2 with a second harmonic generation (SHG) response, distinguishing it from all the reported axially chiral benzenoid NGs. Moreover, R-2 and S-2 also exhibit SHG-CD properties.

Highly Luminescent Chiral Double π-Helical Nanoribbons

Unveiling the mechanism behind chirality propagation and dissymmetry amplification at the molecular level is of significance for the development of chiral systems with comprehensively outstanding chiroptical performances. Herein, we have presented a straightforward Cu-mediated Ullmann homocoupling approach to synthesize perylene diimide-entwined double π-helical nanoribbons encompassing dimer, trimer, and tetramer while producing homochiral or heterochiral linking of chiral centers. A significant dissymmetry amplification was achieved, with absorption dissymmetry factors (|gabs|) increasing from 0.009 to 0.017 and further to 0.019, and luminescence dissymmetry factors (|glum|) rising from 0.007 to 0.013 and eventually to 0.015 for homochiral double π-helical oligomers. The disparity of magnetic transition dipole moment (m) densities in homochiral and heterochiral tetramers by time-dependent density functional theory calculations confirmed that homochiral oligomerization can maximize the total m, which is favorable for achieving ever-increasing g factors. Notably, these double π-helices exhibited exceptional photoluminescence quantum yields (ΦPL) ranging from 83 to 95%. The circularly polarized luminescence brightness (BCPL) eventually reached a remarkable 575 M-1 cm-1 for the homochiral tetramer, which is among the highest values reported for chiral small molecules. This kind of linearly extended double π-helices offers a platform for a comprehensive understanding of the mechanism behind chirality propagation and dissymmetry amplification.

Molecular Graphene Nanoribbon Junctions

One of the challenges for the realization of molecular electronics is the design of nanoscale molecular wires displaying long-range charge transport. Graphene nanoribbons are an attractive platform for the development of molecular wires with long-range conductance owing to their unique electrical properties. Despite their potential, the charge transport properties of single nanoribbons remain underexplored. Herein, we report a synthetic approach to prepare N-doped pyrene-pyrazinoquinoxaline molecular graphene nanoribbons terminated with diamino anchoring groups at each end. These terminal groups allow for the formation of stable molecular graphene nanoribbon junctions between two metal electrodes that were investigated by scanning tunneling microscope-based break-junction measurements. The experimental and computational results provide evidence of long-range tunneling charge transport in these systems characterized by a shallow conductance length dependence and electron tunneling through >6 nm molecular backbone.

A Conformationally Stable π-Expanded X-Type Double Helicene Comprising Dihydropyracylene Units with Multistage Redox Behavior

A π-expanded X-type double [5]helicene comprising dihydropyracylene moieties was synthesized from commercially available acenaphthene. X-ray crystallographic analysis revealed the unique highly twisted structure of the compound resulting in the occurrence of two enantiomers which were separated by chiral HPLC, owing to their high conformational stability. The compound shows strongly bathochromically shifted UV/vis absorption and emission bands with small Stokes shift and considerable photoluminescence quantum yield and circular polarized luminescence response. The electrochemical studies revealed five facilitated reversible redox events, including three reductions and two oxidations, thus qualifying the compound as chiral multistage redox amphoter. The experimental findings are in line with the computational studies based on density functional theory pointing towards increased spatial extension of the frontier molecular orbitals over the polycyclic framework and a considerably narrowed HOMO-LUMO gap.

π-Extended Helical Multilayer Nanographenes with Layer-Dependent Chiroptical Properties

Helical nanographenes (NGs) have attracted increasing attention recently because of their intrinsic chirality and exotic chiroptical properties. However, the efficient synthesis of extended helical NGs featuring a multilayer topology is still underdeveloped, and their layer-dependent chiroptical properties remain elusive. In this study, we demonstrate a modular synthetic strategy to construct a series of novel helical NGs (1-3) with a multilayer topology through a consecutive Diels-Alder reaction and regioselective cyclodehydrogenation from the readily accessible phenanthrene-based precursors bearing ethynyl groups. The resultant NGs exhibit bilayer, trilayer, and tetralayer structures with elongated π extension and rigid helical backbones, as unambiguously confirmed by single-crystal X-ray or electron diffraction analysis. We find that the photophysical properties of these helical NGs are notably influenced by the degree of π extension, which varies with the number of layers, leading to obvious redshifted absorption, a fast rising molar extinction coefficient (ε), and markedly boosted fluorescence quantum yield (Φf). Moreover, the embedded [7]helicene subunits in these NGs result in stable chirality, enabling both chiral resolution and exploration of their layer-dependent chiroptical properties. Profiting from the good alignment of electric and magnetic dipole moments determined by the multilayer structure, the resultant NGs exhibit excellent circular dichroism and circularly polarized luminescence response with unprecedented high CPL brightness up to 168 M-1 cm-1, rendering them promising candidates for CPL emitters.

A Negatively Curved π-Expanded Pyracylene Comprising a Tropylium Cation

We disclose π-expanded pyracylenes and their cationic species comprising 7-membered rings. The compounds were synthesized by stepwise oxidative cyclodehydrogenation to monitor the effect of successive cyclization on the structural and optoelectronic properties. As shown by X-ray crystallography, the complete cyclization leads to a boat-shaped scaffold featuring negative curvature provided by the 7-membered ring. The embedded tropone unit enabled the convenient generation of a stabilized tropylium cation, showing bathochromically shifted absorption bands reaching into the near-infrared region beyond 1000 nm. The altered structural features, supported by theoretical calculations, point towards the positively charged 7-membered ring having aromatic character.

A metal-free photoactive nitrogen-doped carbon nanosolenoid with broad absorption in visible region for efficient photocatalysis

Riemann surfaces inspired chemists to design and synthesize such multidimensional curved carbon architectures. It has been predicted that carbon nanosolenoid materials with Riemann surfaces have unique structures and novel physical properties. Here we report the first synthesis of a nitrogen-doped carbon nanosolenoid (N-CNS) using bottom-up approach with a well-defined structure. N-CNS was obtained by a rational Suzuki polymerization, followed by oxidative cyclodehydrogenation. The successful synthesis of N-CNS was fully characterized by GPC, FTIR, solid-state 13C NMR and Raman techniques. The intrinsic single-strand molecular structures of N-CNS helices can be clearly resolved using low-dose integrated differential phase contrast scanning transmission electron microscopy (iDPC-STEM) technique. Possessing unique structural and physical properties, this long π-extended polymer N-CNS can provide new insight towards bottom-up syntheses of curved nanoribbons and potential applications as a metal-free photocatalyst for visible-light-driven H2 evolution and highly efficient photocatalyst for photoredox organic transformations.

Construction and Phosphorescence Behavior of S/Se-Heteroaromatics/Phenanthrene-Fused Hetero[9]helicenes

Three S/Se-hetero[9]helicenes were synthesized by an assembly strategy of two building blocks, phenanthrene and ternary fused S/Se-heteroaromatic ring, and characterized by single-crystal X-ray diffraction analysis. Their phosphorescence emission gave a long-lived lifetime at the millisecond level. In addition, the high configurational stability of enantiomer (+)-[9]BH-1a was observed without change under both the conditions of 300 °C in the solid state for 18 h and 200 °C in solution of 1,2-dichlorobenzene for 10 h.

Interplay of structure and photophysics of individualized rod-shaped graphene quantum dots with up to 132 sp² carbon atoms

Nanographene materials are promising building blocks for the growing field of low-dimensional materials for optics, electronics and biophotonics applications. In particular, bottom-up synthesized 0D graphene quantum dots show great potential as single quantum emitters. To fully exploit their exciting properties, the graphene quantum dots must be of high purity; the key parameter for efficient purification being the solubility of the starting materials. Here, we report the synthesis of a family of highly soluble and easily processable rod-shaped graphene quantum dots with fluorescence quantum yields up to 94%. This is uncommon for a red emission. The high solubility is directly related to the design of the structure, allowing for an accurate description of the photophysical properties of the graphene quantum dots both in solution and at the single molecule level. These photophysical properties were fully predicted by quantum-chemical calculations.

Helical fused 1,2:8,9-dibenzozethrene oligomers with up to 201° end-to-end twist: "one-pot" synthesis and chiral resolution

Twisted polyarenes with persistent chirality are desirable but their synthesis has remained a challenge. In this study, we present a "one-pot" synthesis of 1,2:8,9-dibenzozethrene (DBZ) and its vertically fused dimers and trimers using nickel-catalyzed cyclo-oligomerization reactions. X-ray crystallographic analysis confirmed highly twisted helical structures that consist of equal parts left- and right-handed enantiomers. Notably, the end-to-end twist between the terminal anthracene units measured 66°, 130°, and 201° for the DBZ monomer, dimer, and trimer, respectively, setting a new record among twisted polyarenes. Furthermore, the chiral resolution by HPLC yielded two enantiomers for the fused DBZ dimer and trimer, both of which maintained stable configurations and showed absorption dissymmetry factors of around 0.008-0.009. Additionally, their optical and electrochemical properties were investigated, which exhibited a chain-length dependence.

Enantiopure J-Aggregate of Quaterrylene Bisimides for Strong Chiroptical NIR-Response

Chiral polycyclic aromatic hydrocarbons can be tailored for next-generation photonic materials by carefully designing their molecular as well as supramolecular architectures. Hence, excitonic coupling can boost the chiroptical response in extended aggregates but is still challenging to achieve by pure self-assembly. Whereas most reports on these potential materials cover the UV and visible spectral range, systems in the near infrared (NIR) are underdeveloped. We report a new quaterrylene bisimide derivative with a conformationally stable twisted π-backbone enabled by the sterical congestion of a fourfold bay-arylation. Rendering the π-subplanes accessible by small imide substituents allows for a slip-stacked chiral arrangement by kinetic self-assembly in low polarity solvents. The well dispersed solid-state aggregate reveals a sharp optical signature of strong J-type excitonic coupling in both absorption (897 nm) and emission (912 nm) far in the NIR region and reaches absorption dissymmetry factors up to 1.1 × 10^-2. The structural elucidation was achieved by atomic force microscopy and single-crystal X-ray analysis which we combined to derive a structural model of a fourfold stranded enantiopure superhelix. We could deduce that the role of phenyl substituents is not only granting stable axial chirality but also guiding the chromophore into a chiral supramolecular arrangement needed for strong excitonic chirality.

Construction of hexabenzocoronene-based chiral nanographenes

The past decade witnessed remarkable success in synthetic molecular nanographenes. Encouraged by the widespread application of chiral nanomaterials, the design, and construction of chiral nanographenes is a hot topic recently. As a classic nanographene unit, hexa-peri-hexabenzocoronene generally serves as the building block for nanographene synthesis. This review summarizes the representative examples of hexa-peri-hexabenzocoronene-based chiral nanographenes.

Helical Bilayer Nanographenes: Impact of the Helicene Length on the Structural, Electrochemical, Photophysical, and Chiroptical Properties

Helical bilayer nanographenes (HBNGs) are chiral π-extended aromatic compounds consisting of two π-π stacked hexabenzocoronenes (HBCs) joined by a helicene, thus resembling van der Waals layered 2D materials. Herein, we compare [9]HBNG, [10]HBNG, and [11]HBNG helical bilayers endowed with [9], [10], and [11]helicenes embedded in their structure, respectively. Interestingly, the helicene length defines the overlapping degree between the two HBCs (number of benzene rings involved in π-π interactions between the two layers), being 26, 14, and 10 benzene rings, respectively, according to the X-ray analysis. Unexpectedly, the electrochemical study shows that the lesser π-extended system [9]HBNG shows the strongest electron donor character, in part by interlayer exchange resonance, and more red-shifted values of emission. Furthermore, [9]HBNG also shows exceptional chiroptical properties with the biggest values of g_abs and g_lum (3.6 × 10^-2) when compared to [10]HBNG and [11]HBNG owing to the fine alignment in the configuration of [9]HBNG between its electric and magnetic dipole transition moments. Furthermore, spectroelectrochemical studies as well as the fluorescence spectroscopy support the aforementioned experimental findings, thus confirming the strong impact of the helicene length on the properties of this new family of bilayer nanographenes.

Two-ring chirality generated by the alignment of two achiral phenylacetylene macrocycles

When two achiral rings are bound mechanically, a chiral source is generated in the assembly. The chiroptical properties could be modulated according to the relative occupation of each ring in the assembly. In fact, we have found that two isomeric assemblies (1 and 2) show unique properties in each assembly with two achiral rings of phenylacetylene macrocycle (PAM). When considering the difference in the chiroptical properties of these two isomeric assemblies (6PAM × 2), no comparison was available based on no activity of the achiral component element itself (6PAM). In this work, we synthesized a two-ring chiral analog (4) by the ring-fusion of two 6PAMs to an 11PAM, and examined the chiroptical properties of 4, since the single helix was imparted as a chiral source. By comparison of the chiroptical properties (molar circular dichroism and molar optical rotation) of 1 and 2 to those of 4, we demonstrated that the disparity was related to the alignment of the two achiral rings.

A Dualistic Arrangement of a Chiral [1]Rotaxane Based on the Assembly of Two Rings and Two Rods

We demonstrate the synthesis and chiroptical properties of doubled molecules of a chiral [1]rotaxane, based on the assembly of an achiral ring of a phenylacetylene macrocycle (6PAM) and a p-phenylene ethynylene rod. Two molecules of [1]rotaxane constituted the doubled molecule through the ring fusion of 6PAMs to a 10PAM, which assured stationary occupation relative to each optically active unit. The absorption properties of the 10PAM-based doubled molecule and 6PAM-based original unit were consistently characterized by the independent existence of m-phenylene ethynylene ring(s) and p-phenylene ethynylene rod(s). Thus, molar circular dichroism (CD) was directly compared between the doubled molecule (n = 2) and the original unit (n = 1) to show that molar CD was increased more than expected by an increase in the number of units, or by an increase in absorbance. Due to the invariance of the configuration and the relative occupation of two units arranged adjacent to each other in 10PAM, one more comparison was available with an isomeric molecule of two rings and two rods in a threaded-and-unthreaded form. The additional arrangement of an optically inactive unit in an unthreaded form also led to an increase in molar CD, compared to that of the original chiral unit in a threaded form.

Synthesis of Bioctacene-Incorporated Nanographene with Near-Infrared Chiroptical Properties

We report the synthesis of a hexabenzoperihexacene (HBPH) with two incorporated octacene substructures, which was unambiguously characterized by single-crystal X-ray analysis. The theoretical isomerization barrier of the (P,P)-/(P,M)-forms was estimated to be 38.4 kcal mol^-1 , and resolution was achieved by chiral HPLC. Notably, the enantiomers exhibited opposite circular dichroism responses up to the near-infrared (NIR) region (830 nm) with a high g_abs value of 0.017 at 616 nm. Moreover, HBPH demonstrated NIR emission with a maximum at 798 nm and an absolute PLQY of 41 %. The excited-state photophysical properties of HBPH were investigated by ultrafast transient absorption spectroscopy, revealing an intriguing feature that was attributed to the rotational and/or conformational dynamics of HBPH after excitation. These results provide new insight into the design of chiral nanographene with NIR optical properties for potential chiroptical applications.

A Heptacene Analogue Entailing a Quinoidal Benzodi[7]annulene (7/6/7 Ring) Core with a Tunable Configuration and Multiple Redox Properties

Non-benzenoid acenes containing heptagons have received increasing attention. We herein report a heptacene analogue containing a quinoidal benzodi[7]annulene core. Derivatives of this new non-benzenoid acene were obtained through an efficient synthetic strategy involving an Aldol condensation and a Diels-Alder reaction as key steps. The configuration of this heptacene analogue can be modulated from a wavy to a curved one by just varying the substituents from a (triisopropylsilyl)ethynyl group to a 2,4,6-triisopropylphenyl (Trip) group. When mesityl (Mes) groups are linked to the heptagons, the resulting non-benzenoid acene displays polymorphism with a tunable configuration from a curved to a wavy one upon varying the crystallization conditions. In addition, this new non-benzenoid acene can be oxidized or reduced by NOSbF₆ or KC₈ to the respective radical cation or radical anion. Compared with the neutral acene, the radical anion shows a wavy configuration and the central hexagon becomes aromatic.

Azepine-Embedded Seco-Hexabenzocoronene-Based Helix Nanographenes: Access to Modification of the Core by N-H Functionalization

Contorted polycyclic aromatic hydrocarbons (PAHs) or nanographenes (NGs) have received increasing attention and are mostly prepared by "bottom-up" strategies. Apparently, systematically tuning the properties of NGs for application is important but challenging. Here, a new type of helix, azepine-embedded NGs, were designed and synthesized by the introduction of NH into the hexa-peri-hexabenzocoronene (HBC) core. We demonstrate that this nitrogen-doped NG can be functionalized via N-H derivatization. Through modifications to the NH site with a chiral auxiliary reagent, optical resolution of the chiral NG was achieved. Meanwhile, it was found that by introducing various aryl groups with electron-donating or electron-withdrawing substituents, the emission intensity and the fluorescence mechanism can be modulated. Compared to the original NH-containing NG, the modified derivative exhibited improved fluorescence efficiency and tunable emission wavelength. A functionalized structure of benzoic acid with considerably improved fluorescence efficiency, hydrophilicity, and membrane permeability to stain the live cells was proved.

Helical Trilayer Nanographenes with Tunable Interlayer Overlaps

The synthesis of well-defined nanocarbon multilayers, beyond the bilayer structure, is still a challenging goal. Herein, two trilayer nanographenes were synthesized by covalently linking nanographene layers through helicene bridges. The structural characterization of the trilayer nanographenes revealed a compact trilayer-stacked architecture. The introduction of a furan ring into the helicene linker modulates the interlayer overlap and π-conjugation of the trilayer nanographenes, enabling the tuning of the interlayer coupling, as demonstrated by optical, electrochemical, and theoretical analyses. Both synthesized trilayer nanographenes are rigid chiral nanocarbons and show a chirality transfer from the helicene moiety to the stacked nanographene layers. These helical trilayer nanographenes reported here represent the covalently linked multilayer nanographenes rather than bilayer ones, showing the tunable multilayer stacking structure.

Helical Synthetic Nanographenes with Atomic Precision

ConspectusUnderstanding and harnessing the properties of nanoscale molecular entities are considered as new frontiers in basic chemistry. In this regard, synthetic nanographene with atomic precision has attracted much attention recently. For instance, taking advantage of the marvelous bonding capability of carbon, flat, curved, ribbon-type, or cone-shaped nanographenes have been prepared in highly controllable and elegant manner, allowing one to explore fascinating molecular architectures with intriguing optical, electrochemical, and magnetic characteristics. This stands in stark contrast to other carbon-rich nanomaterials, such as graphite oxides or carbon quantum dots, which preclude thorough investigations because of complicate structural defects. Undoubtedly, synthetic nanographene contributes strongly to modern aromatic chemistry and represents a vibrant field that may deliver transforming functional materials crucial for optoelectronics, nanotechnologies, and biomedicine.Nonetheless, in many cases, synthesis and characterization of nanographene compounds are highly demanding. Low solubility, high molecular strain, undesired selectivity, as well as incomplete or excessive C-C bond formation are common impediments, that require formidable efforts to control the molecular geometry, to modulate the edge structure, to achieve accurate doping, or to push the upper size boundary. These endeavors are indispensable for establishing structure-property relationships, and lay down foundation for exploring synthetic nanographenes at a high level of sophistications.In this Account, we summarize our contributions to this field by presenting a series of helical synthetic nanographenes, such as hexapole [7]helicene (H7H), nitrogen-doped H7H, hexapole [9]helicene (H9H), superhelicene, and supertwistacene. This kind of giant synthetic nanographene reaches the size domain of carbon quantum dots, albeit has precise atomic structure. It provides a unique platform to study aromatic chemistry and chirality at the nanoscale. We discuss synthetic methods and point out, in particular, the strengths and pitfalls of Scholl oxidation, which are expected to be valuable for making synthetic nanographenes in general. In addition, we illustrate their exciting electrochemical and photophysical performance, which include, but are not limited to, reversible multielectron redox chemistry, record high panchromatic absorption, impressive photothermal behavior, and extremely strong Cotton effect. These unusual characteristics are convincingly traced back to their three-dimensional conjugated architectures, highlighting the critical roles of π-electron delocalization, heteroatom-doping, substitution, and molecular symmetry in determining nanographenes' properties and functions. Lastly, we put forward our understanding on the challenges and opportunities that lies ahead and hope this Account will inspire ever more ambitious achievements from this attractive area of research.

Synthesis of Highly Luminescent Chiral Nanographene

Chiral nanographenes with both high fluorescence quantum yields (Φ_F ) and large dissymmetry factors (g_lum ) are essential to the development of circularly polarized luminescence (CPL) materials. However, most studies have been focused on the improvement of g_lum , whereas how to design highly emissive chiral nanographenes is still unclear. In this work, we propose a new design strategy to achieve chiral nanographenes with high Φ_F by helical π-extension of strongly luminescent chromophores while maintaining the frontier molecular orbital (FMO) distribution pattern. Chiral nanographene with perylene as the core and two dibenzo[6]helicene fragments as the wings has been synthesized, which exhibits a record high Φ_F of 93 % among the reported chiral nanographenes and excellent CPL brightness (B_CPL ) of 32 M^-1  cm^-1 .

Solution-Synthesized Extended Graphene Nanoribbons Deposited by High-Vacuum Electrospray Deposition

Solution-synthesized graphene nanoribbons (GNRs) facilitate various interesting structures and functionalities, like nonplanarity and thermolabile functional groups, that are not or not easily accessible by on-surface synthesis. Here, we show the successful high-vacuum electrospray deposition (HVESD) of well-elongated solution-synthesized GNRs on surfaces maintained in ultrahigh vacuum. We compare three distinct GNRs, a twisted nonplanar fjord-edged GNR, a methoxy-functionalized "cove"-type (or also called gulf) GNR, and a longer "cove"-type GNR both equipped with alkyl chains on Au(111). Nc-AFM measurements at room temperature with submolecular imaging combined with Raman spectroscopy allow us to characterize individual GNRs and confirm their chemical integrity. The fjord-GNR and methoxy-GNR are additionally deposited on nonmetallic HOPG and SiO2, and fjord-GNR is deposited on a KBr(001) surface, facilitating the study of GNRs on substrates, as of now not accessible by on-surface synthesis.

Precise Structural Regulation and Band-Gap Engineering of Curved Graphene Nanoribbons

Graphene nanoribbons (GNRs)─quasi-one-dimensional graphene cutouts─have drawn growing attention as promising candidates for next-generation electronic and spintronic materials. Theoretical and experimental studies have demonstrated that the electronic and magnetic properties of GNRs critically depend on their widths and edge topologies. Thus, the preparation of structurally defined GNRs is highly desirable not only for their fundamental physicochemical studies but also for their future technological development in carbon-based nanoelectronics. In the past decade, significant efforts have been made to construct a wide variety of GNRs with well-defined widths and edge structures via bottom-up synthesis. In addition to extensively studied planar GNRs consisting of armchair, zigzag, or gulf edges, curved GNRs (cGNRs) bearing cove ([4]helicene unit) or fjord ([5]helicene unit) regions along the ribbon edges have received increasing interest after we presented the first attempt to synthesize the fully cove-edged GNRs in 2015. Profiting from their novel edge topologies, cGNRs usually exhibit an unprecedented narrow band gap and high carrier transport mobility in comparison to the planar GNRs with similar widths. Moreover, cGNRs with particular out-of-plane-distorted structures are expected to provide further opportunities in nonlinear optics and asymmetric catalysis. However, the synthesis of cGNRs bearing cove or fjord edges remains underdeveloped due to the absence of efficient synthetic strategies/methods and suitable molecular precursor design.In this Account, we present the recent advances in the bottom-up synthesis and characterization of structurally defined cGNRs containing cove or fjord edges, mainly from our research group. First, the synthetic strategies toward cGNRs bearing cove edges are described, including the design of molecular monomers and polymer precursors as well as the corresponding polymerization methods, such as Ullmann coupling, Yamamoto coupling, A₂B₂-type Diels-Alder polymerization, followed by Scholl-type cyclodehydrogenation. The synthesis of typical model compounds is also described to support the understanding of the related cGNRs. In addition, the synthesis of cGNRs containing fjord edges from other research groups via the regioselective Scholl reaction, Hopf cyclization or regioselective photochemical cyclodehydrochlorination approach is presented. Second, we discuss the optoelectronic properties of the as-synthesized cGNRs and reveal the design principle to obtain cGNRs with high charge carrier mobilities. Finally, the challenges and prospects in the design and synthesis of cGNRs are offered. We anticipate that this Account will further stimulate the development of cGNRs through a collaborative effort between different disciplines.

Synthesis of zigzag- and fjord-edged nanographene with dual amplified spontaneous emission

We report the synthesis of a dibenzodinaphthocoronene (DBDNC) derivative as a novel nanographene with armchair, zigzag, and fjord edges, which was characterized by NMR and X-ray crystallography as well as infrared (IR) and Raman spectroscopies. Ultrafast transient absorption (TA) spectroscopy revealed the presence of stimulated emission signals at 655 nm and 710 nm with a relatively long lifetime, which resulted in dual amplified spontaneous emission (ASE) bands under ns-pulsed excitation, indicating the promise of DBNDC as a near-infrared (NIR) fluorophore for photonics. Our results provide new insight into the design of nanographene with intriguing optical properties by incorporating fjord edges.

Remote Control of Dynamic Twistacene Chirality

We report a reliable way to manipulate the dynamic, axial chirality in perylene diimide (PDI)-based twistacenes. Specifically, we reveal how chiral substituents on the imide position induce the helicity in a series of PDI-based twistacenes. We demonstrate that this remote chirality is able to control the helicity of flexible [4]helicene subunits by UV-vis, CD spectroscopy, X-ray crystallography, and TDDFT calculations. Furthermore, we have discovered that both the chiral substituent and the solvent each has a strong impact on the sign and intensity of the CD signals, highlighting the control of the dynamic helicity in this flexible system. DFT calculations suggest that the steric interaction of the chiral substituents is the important factor in how well a particular group is at inducing a preferred helicity.

Simple and Practical Conversion of Benzoic Acids to Phenols at Room Temperature

Phenols are important organic molecules because they have found widespread applications in many fields. Herein, an efficient and practical approach to prepare phenols from benzoic acids via simple organic reagents at room temperature is reported. This approach is compatible with various functional groups and heterocycles and can be easily scaled up. To demonstrate its synthetic utility, bioactive molecules and unsymmetrical hexaarylbenzenes have been prepared by leveraging this transformation as strategic steps. Mechanistic investigations suggest that the key migration step involves a free carbocation instead of a radical intermediate. Considering the abundance of benzoic acids and the utility of phenols, it is anticipated that this method will find broad applications in organic synthesis.

The Scholl Reaction as a Powerful Tool for Synthesis of Curved Polycyclic Aromatics

The past decade has witnessed remarkable success in the synthesis of curved polycyclic aromatics through Scholl reactions which enable oxidative aryl-aryl coupling even in company with the introduction of significant steric strain. These curved polycyclic aromatics are not only unique objects of structural organic chemistry in relation to the nature of aromaticity but also play an important role in bottom-up approaches to precise synthesis of nanocarbons of unique topology. Moreover, they have received considerable attention in the fields of supramolecular chemistry and organic functional materials because of their interesting properties and promising applications. Despite the great success of Scholl reactions in synthesis of curved polycyclic aromatics, the outcome of a newly designed substrate in the Scholl reaction still cannot be predicted in a generic and precise manner largely due to limited understanding on the reaction mechanism and possible rearrangement processes. This review provides an overview of Scholl reactions with a focus on their applications in synthesis of curved polycyclic aromatics with interesting structures and properties and aims to shed light on the key factors that affect Scholl reactions in synthesizing sterically strained polycyclic aromatics.

Electrochemical and spectroscopic properties of twisted dibenzo[g,p]chrysene derivatives

Dibenzo[g,p]chrysene (DBC), which consists of a twisted naphthalene core with four fused benzene rings, is a promising framework for organic electronic materials. Therefore, the research for structure–property relationships is important for the design of DBC-based materials. Here, the electrochemical and spectroscopic properties of DBC derivatives were investigated, and the effects of substituents and torsion of the naphthalene moiety were examined based on density functional theory (DFT) calculations. All the substituted DBC derivatives showed higher oxidation potentials than that for DBC-H, even for compounds that contained an electron-donating group such as DBC-Me and DBC-SMe. DFT calculations clearly indicate that these higher oxidation potentials are due to the ineffective conjugation of the MeO group, which is oriented perpendicular to the benzene ring because of the steric repulsion of substituents on both sides. More specifically, the inductive effect of the MeO group is dominant rather than the mesomeric effect when the substituent is located at both sides of the MeO group. Concerning the torsion of the naphthalene moiety, the twisting results in a slight increase in the HOMO and a slight lowering of the LUMO. The twisting effect is much smaller than the conjugation effect of the MeO group. Absorption spectra of all the substituted DBC derivatives also showed a red-shift as compared to that for DBC-H. Concerning the luminescence, a strong photoluminescence was observed for DBC-H and DBC-Si.

Nanographenes and Graphene Nanoribbons as Multitalents of Present and Future Materials Science

As cut-outs from a graphene sheet, nanographenes (NGs) and graphene nanoribbons (GNRs) are ideal cases with which to connect the world of molecules with that of bulk carbon materials. While various top-down approaches have been developed to produce such nanostructures in high yields, in the present perspective, precision structural control is emphasized for the length, width, and edge structures of NGs and GNRs achieved by modern solution and on-surface syntheses. Their structural possibilities have been further extended from "flatland" to the three-dimensional world, where chirality and handedness are the jewels in the crown. In addition to properties exhibited at the molecular level, self-assembly and thin-film structures cannot be neglected, which emphasizes the importance of processing techniques. With the rich toolkit of chemistry in hand, NGs and GNRs can be endowed with versatile properties and functions ranging from stimulated emission to spintronics and from bioimaging to energy storage, thus demonstrating their multitalents in present and future materials science.

Doubling the Length of the Longest Pyrene-Pyrazinoquinoxaline Molecular Nanoribbons

Molecular nanoribbons are a class of atomically-precise nanomaterials for a broad range of applications. An iterative approach that allows doubling the length of the longest pyrene-pyrazinoquinoxaline molecular nanoribbons is described. The largest nanoribbon obtained through this approach-with a 60 linearly-fused ring backbone (14.9 nm) and a 324-atoms core (C276 N48 )-shows an extremely high molar absorptivity (values up to 1 198 074 M-1  cm-1 ) that also endows it with a high molar fluorescence brightness (8700 M-1  cm-1 ).

Boosting Circularly Polarized Luminescence Performance by a Double π-Helix and Heteroannulation

Design challenges in the development of circularly polarized luminescence (CPL) materials are focused on balancing the luminescence dissymmetry factor (g_lum) and photoluminescence quantum yield (Φ_PL) by regulating the electric (μ) and magnetic (m) transition dipole moment vectors. Aiming at designing efficient CPL emitters and clarifying the chiroptical variation mechanism, herein, we present a double π-helix based on a cyclooctatetraene-embedded perylene diimide dimer that combines chirality with molecular entanglement and very high barriers for racemization. Through finely regulating the magnitudes of μ and m, the maximal dissymmetry factors |g_abs| and |g_lum| can be boosted to 0.035 and 0.030, respectively, as revealed by circular dichroism (CD) and CPL spectra. The results indicate a 3-fold improvement of g values and a modulated Φ_PL from 1a, 4, to 5 by nitrogen heteroannulation at the bay region. The CPL brightness (B_CPL) of 5 reaches a recorded value of up to 573.4 M^-1 cm^-1, among the highest values of chiral small molecules reported so far. This work has provided a comprehensive insight into a new class of chiral materials with high CPL activities, further laying molecular fundamentals for chiral optoelectronics.

Heptagon-Embedded π-Expanded Thieno- and N-Methylpyrrolo-Pyridazines with Substantial Out-of-Plane Dipole Moment

Herein, we describe the synthesis and characterization of fully fused tetraphenylthieno[3,4-d]pyridazine 1 and N-methylpyrrolo[3,4-d]pyridazine 2 with two embedded seven-membered rings. Owing to the incorporated heptagon, 1 and 2 exhibited C_s-symmetric saddle conformations in the solid state with mean plane deviation around 0.38 Å. π-Expanded thienopyridazine 1 showed a one-dimensional (1-D) columnar packing along the b axis with net dipole moment aligning perpendicular to the b axis in the polar crystal system Pc. On the other hand, 2 formed a partially π-stacked brick-work structure. In addition to the C_s-symmetric saddle conformations found in the crystals, density functional theory (DFT) calculation found C₂-symmetric twisted conformations of both 1 and 2 close in energy to the saddle conformations. The barrier of conformational interconversion was calculated to be 32 (1) and 31 kJ·mol^-1 (2), and the interconversion occurs fast even at -60 °C as evidenced by variable-temperature (VT)-NMR studies. While 1 and 2 have moderately curved structures, optical and electrochemical studies revealed effective π-conjugation over the fused diphenylene units, which is also supported by DFT calculation. As the result of the intrinsic large dipole moment of thieno- and pyrrolo-pyridazines and the notably curved structure, 1 (2) has a substantial out-of-plane dipole moment of 2.0 (3.3) D in the saddle conformations.

Helically Twisted Nanoribbons Based on Emissive Near-Infrared Responsive Quaterrylene Bisimides

Graphene nanoribbons (GNRs) have the potential for next-generation functional devices. So far, GNRs with defined stereochemistry are rarely reported in literature and their optical response is usually bound to the ultraviolet or visible spectral region, while covering the near-infrared (NIR) regime is still challenging. Herein, we report two novel quaterrylene bisimides with either one- or twofold-twisted π-backbones enabled by the steric congestion of a fourfold bay arylation leading to an end-to-end twist of up to 76°. The strong interlocking effect of the π-stacked aryl substituents introduces a rigidification of the chromophore unambiguously proven by single-crystal X-ray analysis. This leads to unexpectedly strong NIR emissions at 862 and 903 nm with quantum yields of 1.5 and 0.9%, respectively, further ensuring high solubility as well as resolvable and highly stable atropo-enantiomers. Circular dichroism spectroscopy of these enantiopure chiral compounds reveals a strong Cotton effect Δε of up to 67 M^-1 cm^-1 centered far in the NIR region at 849 nm.

Synthesis of a helicene-fused porphyrin leading to a π-extended chiral chromophore

The preparation of several covalently linked [6]-helicene-porphyrins is reported. A fused [6]-helicene-porphyrin π-extended aromatic system was isolated, the enantiomers separated and the chiroptical properties determined. The oxidative cyclodehydrogenation proved to be very effective for six-membered fused helical systems, but not suited for the formation of five-membered fused systems.

π-Expansion of 2,3,6,7-Tetraazanaphthalene with Two Embedded Heptagons: Highly Twisted Structure and Lone-Pair/π* Interaction in the Crystal

Synthesis and characterization of doubly diphenylene-fused 2,3,6,7-tetraazanaphthalene 1 are described. Single-crystal X-ray diffraction analysis showed the highly twisted structure of 1 with a degree of twisting of 13.0°/Å, which is one of the largest values for a π-system. In the crystal, molecules of 1 formed an orthogonal one-dimensional column with π-stacking of diphenylene moieties and a short intermolecular C···N distance due to lone-pair/π* interaction, which is a rare example of lone-pair/π* interaction in a supramolecular assembly.

Depositing Molecular Graphene Nanoribbons on Ag(111) by Electrospray Controlled Ion Beam Deposition: Self-Assembly and On-Surface Transformations

The chemical processing of low-dimensional carbon nanostructures is crucial for their integration in future devices. Here we apply a new methodology in atomically precise engineering by combining multistep solution synthesis of N-doped molecular graphene nanoribbons (GNRs) with mass-selected ultra-high vacuum electrospray controlled ion beam deposition on surfaces and real-space visualisation by scanning tunnelling microscopy. We demonstrate how this method yields solely a controllable amount of single, otherwise unsublimable, GNRs of 2.9 nm length on a planar Ag(111) surface. This methodology allows for further processing by employing on-surface synthesis protocols and exploiting the reactivity of the substrate. Following multiple chemical transformations, the GNRs provide reactive building blocks to form extended, metal-organic coordination polymers.