Atomically Dispersed Copper Sites in a Metal-Organic Framework for Reduction of Nitrogen Dioxide

Room Temperature Reduction of Nitrogen Oxide on Iron Metal-Organic Frameworks

Nitrogen oxides represent one of the main threats for the environment. Despite decades of intensive research efforts, a sustainable solution for NOx removal under environmental conditions is still undefined. Using theoretical modelling, material design, state-of-the-art investigation methods and mimicking enzymes, it is found that selected porous hybrid iron(II/III) based MOF material are able to decompose NOx, at room temperature, in the presence of water and oxygen, into N2 and O2 and without reducing agents. This paves the way to the development of new highly sustainable heterogeneous catalysts to improve air quality.

Changeable Active Sites by Pr Doping CuSA-TiO2 Photocatalyst for Excellent Hydrogen Production

Photocatalytic water splitting for clean hydrogen production has been a very attractive research field for decades. However, the insightful understanding of the actual active sites and their impact on catalytic performance is still ambiguous. Herein, a Pr-doped TiO2-supported Cu single atom (SA) photocatalyst is successfully synthesized (noted as Cu/Pr-TiO2). It is found that Pr dopants passivate the formation of oxygen vacancies, promoting the density of photogenerated electrons on the CuSAs, and optimizing the electronic structure and H* adsorption behavior on the CuSA active sites. The photocatalytic hydrogen evolution rate of the obtained Cu/Pr-TiO2 catalyst reaches 32.88 mmol g-1 h-1, 2.3 times higher than the Cu/TiO2. Innovatively, the excellent catalytic activity and performance is attributed to the active sites change from O atoms to CuSAs after Pr doping is found. This work provides new insight for understanding the accurate roles of single atoms in photocatalytic water splitting.

A suitably fabricated ternary nanocomposite (Cu-CuO@rGO-SiO2) as a sustainable and common heterogeneous catalyst for C-S, C-O and C-N coupling reactions

A hybrid composite based on π-electron rich reduced graphene oxide (rGO) and mesoporous silica (SiO2) was prepared and decorated with copper species to afford a ternary nanocomposite material (Cu-CuO@rGO-SiO2). This copper-based nanocomposite was successfully used as a robust and multi-tasking heterogeneous catalyst for most common cross-coupling reactions (e.g. C-S, C-O and C-N coupling). A broad range of catalytic activities are believed to be originated from the synergism of different co-existing copper species (Cu(0) and CuO) and facile charge transfer from the metal ions towards rGO-SiO2 matrices, as established from XPS and other studies.

Insights Into the Mechanochemical Glass Formation of Zeolitic Imidazolate Frameworks

Metal-organic framework (MOF) glasses, known for their potential in gas separation, optics, and solid-state electrolytes, benefit from the processability of their (supercooled) liquid state. Traditionally, MOF glasses are produced by heating MOF crystals to their melting point and then cooling the liquid MOF to room temperature under an inert atmosphere. While effective, this melt-quenching technique requires high energy due to the high temperatures involved. It also limits the scope of new material development by restricting the compositional range to only those combinations of metal ions and linkers that are highly thermally stable. An alternative, mechanical milling at room temperature, has demonstrated its capability to transform MOF crystals into amorphous phases. However, the specific conditions under which these amorphous phases exhibit glass-like behavior remain uncharted. In this study, we explore the mechanochemical amorphization and vitrification of a variety of zeolitic imidazolate frameworks (ZIFs) with diverse linkers and different metal ions (Zn2+, Co2+ and Cu2+) at room temperature. Our findings demonstrate that ZIFs capable of melting can be successfully converted into glasses through ball-milling. Remarkably, some non-meltable ZIFs can also be vitrified using the ball-milling technique, as highlighted by the preparation of the first Cu2+-based ZIF glass.

Metalation of metal-organic frameworks: fundamentals and applications

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

Engineering NH2-Cu-NH2 Triple-atom Sites in Defective MOFs for Selective Overall Photoreduction of CO2 into CH3COCH3

Selective photoreduction of CO2 to multicarbon products, is an important but challenging task, due to high CO2 activation barriers and insufficient catalytic sites for C-C coupling. Herein, a defect engineering strategy for incorporating copper sites into the connected nodes of defective metal-organic framework UiO-66-NH2 for selective overall photo-reduction of CO2 into acetone. The Cu2+ site in well-modified CuN2O2 units served as a trapping site to capture electrons via efficient electron-hole separation, forming the active Cu+ site for CO2 reduction. Two NH2 groups in CuN2O2 unit adsorb CO2 and cooperated with copper ion to functionalize as a triple atom catalytic site, each interacting with one CO2 molecule to strengthen the binding of *CO intermediate to the catalytic site. The deoxygenated *CO attached to the Cu site interacted with *CH3 fixed at one amino group to form the key intermediate CO*-CH3, which interacted with the third reduction intermediate on another amino group to produce acetone. Our photocatalyst realizes efficient overall CO2 reduction to C3 product acetone CH3COCH3 with an evolution rate of 70.9 μmol gcat -1 h-1 and a selectivity up to 97 % without any adducts, offering a promising avenue for designing triple-atomic sites to producing C3 product from photosynthesis with water.

Porous Coordination Polymer MOF-808 as an Effective Catalyst to Enhance Sustainable Chemical Processes

The improvement of sustainable chemical processes plays a pivotal role in safe environmental and societal development, for example, by reducing the use of hazardous substances, preventing chemical waste, and improving the efficiency of chemical reactions to obtain added-value compounds. In this context, the porous coordination polymer MOF-808 (MOF, metal-organic framework) was prepared by a straightforward method in water, at room temperature, and was unequivocally characterized by powder X-ray diffraction, vibrational spectroscopy, thermogravimetric analysis, and scanning electron microscopy. MOF-808 material was applied for the first time as catalysts in ring-opening aminolysis reactions of epoxides. It demonstrated high activity and selectivity for reactions of styrene oxide and cyclohexene oxide with aniline, using a very low amount of an eco-sustainable solvent (0.5 mL of EtOH), at 70 °C. Moreover, MOF-808 demonstrated high stability in the catalytic reaction conditions applied, and a notable reuse capacity of up to 20 consecutive reaction cycles, without significant variation in its catalytic performance. In fact, this Zr-based porous coordination polymer prepared by environment-friendly conditions proved to be a novel efficient heterogeneous catalyst, promoting the ring-opening reaction of epoxides under more sustainable conditions, and using a very low amount of catalyst.

Zr-Based MOF-Stabilized CO2-Responsive Pickering Emulsions for Efficient Reduction of Nitroarenes

A Pickering emulsion is a natural microreactor for interfacial catalysis in which an emulsifier is critical. Recently, a metal-organic framework (MOF) has attracted attention to emulsify water-organic mixtures for constructing a Pickering emulsion. However, a few stimuli-responsive Pickering emulsions based on MOFs have been reported, and the MOF emulsifiers cannot be regenerated at room temperature. Herein, the Zr-MOF with a rodlike morphology is synthesized using ionic liquid as a modulator and then modified with n-(trimethoxysilylpropyl)imidazole (C3im) to prepare a series of functionalized Zr-MOFs (MOF-C3im). It is found that MOF-C3im is an excellent emulsifier to construct stable and CO2-responsive Pickering emulsions even at low content (>0.20 wt %). Notably, the emulsification and demulsification of the emulsions can be easily and reversibly switched by bubbling of CO2 and N2 alternatively at room temperature because CO2 and imidazole molecules anchored on the Zr-MOF underwent a reversible acid-base reaction, resulting in an obvious change in the wettability of the emulsifier. As a proof of concept, the reduction reactions of nitrobenzene have been successfully carried out in these Pickering emulsions, demonstrating the efficient integration as a microreactor for chemical reaction, product separation, and emulsifier recycling under ambient conditions. This strategy provides an innovative option to develop stimulus-responsive Pickering emulsions for sustainable chemical processes.

Copper Single-Atom Catalysts-A Rising Star for Energy Conversion and Environmental Purification: Synthesis, Modification, and Advanced Applications

Future renewable energy supply and green, sustainable environmental development rely on various types of catalytic reactions. Copper single-atom catalysts (Cu SACs) are attractive due to their distinctive electronic structure (3d orbitals are not filled with valence electrons), high atomic utilization, and excellent catalytic performance and selectivity. Despite numerous optimization studies are conducted on Cu SACs in terms of energy conversion and environmental purification, the coupling among Cu atoms-support interactions, active sites, and catalytic performance remains unclear, and a systematic review of Cu SACs is lacking. To this end, this work summarizes the recent advances of Cu SACs. The synthesis strategies of Cu SACs, metal-support interactions between Cu single atoms and different supports, modification methods including modification for carriers, coordination environment regulating, site distance effect utilizing, and dual metal active center catalysts constructing, as well as their applications in energy conversion and environmental purification are emphatically introduced. Finally, the opportunities and challenges for the future Cu SACs development are discussed. This review aims to provide insight into Cu SACs and a reference for their optimal design and wide application.

Defects-Induced Single-Atom Anchoring on Metal-Organic Frameworks for High-Efficiency Photocatalytic Nitrogen Reduction

Aiming to improve the photocatalytic activity in N2 fixation to produce ammonia, herein, we proposed a photochemical strategy to fabricate defects, and further deposition of Ru single atoms onto UiO-66 (Zr) framework. Electron-metal-support interactions (EMSI) were built between Ru single atoms and the support via a covalently bonding. EMSI were capable of accelerating charge transfer between Ru SAs and UiO-66, which was favorable for highly-efficiently photocatalytic activity. The photocatalytic production rate of ammonia improved from 4.57 μmol g-1  h-1 to 16.28 μmol g-1  h-1 with the fabrication of defects onto UiO-66, and further to 53.28 μmol g-1  h-1 with Ru-single atoms loading. From the DFT results, it was found that d-orbital electrons of Ru were donated to N2 π✶-antibonding orbital, facilitating the activation of the N≡N triple bond. A distal reaction pathway was probably occurred for the photocatalytic N2 reduction to ammonia on Ru1 /d-UiO-66 (single Ru sites decorated onto the nodes of defective UiO-66), and the first step of hydrogenation of N2 was the reaction determination step. This work shed a light on improving the photocatalytic activity via feasibly anchoring single atoms on MOF, and provided more evidences to understand the reaction mechanism in photocatalytic reduction of N2 .

Analysis of a Cu-Doped Metal-Organic Framework, MFM-520(Zn1-x Cux ), for NO2 Adsorption

MFM-520(Zn) confines dimers of NO2 with a high adsorption of 4.52 mmol g-1 at 1 bar at 298 K. The synthesis and the incommensurate structure of Cu-doped MFM-520(Zn) are reported. The introduction of paramagnetic Cu2+ sites allows investigation of the electronic and geometric structure of metal site by in situ electron paramagnetic resonance (EPR) spectroscopy upon adsorption of NO2 . By combining continuous wave and electron-nuclear double resonance spectroscopy, an unusual reverse Berry distorted coordination geometry of the Cu2+ centers is observed. Interestingly, Cu-doped MFM-520(Zn0.95 Cu0.05 ) shows enhanced adsorption of NO2 of 5.02 mmol g-1 at 1 bar at 298 K. Whereas MFM-520(Zn) confines adsorbed NO2 as N2 O4 , the presence of monomeric NO2 at low temperature suggests that doping with Cu2+ centers into the framework plays an important role in tuning the dimerization of NO2 molecules in the pore via the formation of specific host-guest interactions.

Low-Valent Metals in Metal-Organic Frameworks Via Post-Synthetic Modification

Metal-organic frameworks (MOFs) provide uniquely tunable, periodic platforms for site-isolation of reactive low-valent metal complexes of relevance in modern catalysis, adsorptive applications, and fundamental structural studies. Strategies for integrating such species in MOFs include post-synthetic metalation, encapsulation and direct synthesis using low-valent organometallic complexes as building blocks. These approaches have each proven effective in enhancing catalytic activity, modulating product distributions (i.e., by improving catalytic selectivity), and providing valuable mechanistic insights. In this minireview, we explore these different strategies, as applied to isolate low-valent species within MOFs, with a particular focus on examples that leverage the unique crystallinity, permanent porosity and chemical mutability of MOFs to achieve deep structural insights that lead to new paradigms in the field of hybrid catalysis.

Analysis and Refinement of Host-Guest Interactions in Metal-Organic Frameworks

ConspectusMetal-organic frameworks (MOFs) are a class of hybrid porous materials characterized by their periodic assembly using metal ions and organic ligands through coordination bonds. Their high crystallinity, extensive surface area, and adjustable pore sizes make them promising candidates for a wide array of applications. These include gas adsorption and separation, substrate binding, and catalysis, of relevance to tackling pressing global issues such as climate change, energy challenges, and pollution. In comparison to traditional porous materials such as zeolites and activated carbons, the design flexibility of organic ligands in MOFs, coupled with their orderly arrangement with associated metal centers, allows for the precise engineering of uniform pore environments. This unique feature enables a rich variety of interactions between the MOF host and adsorbed gas molecules, which are fundamental to understanding the observed uptake capacity and selectivity for target gas molecules and thus the overall performance of the material.In this Account, a data set for three-dimensional MOFs has been constructed based upon the structural analysis of host-guest interactions using the largest experimental database, the Cambridge Structural Database (CSD). A full screening was performed on structures with guest molecules of H2, C2H2, CO2, and SO2, and the relationship between the primary binding site, the isosteric heats of adsorption (Qst), and the adsorption uptake was extracted and established. We review the methodologies to refine host-guest interactions based primarily on our studies on the host-guest chemistry of MOFs. The methods include ligand functionalization, variation of metal centers, formation of defects, addition of single atom sites, and control of pore size and structure. In situ structural and dynamic investigations using diffraction and spectroscopic techniques are powerful tools to visualize the details of host-guest interactions upon the above modifications, affording key insights into functional performance at a molecular level. Finally, we give an outlook of future research priorities in the study of host-guest chemistry in MOF materials. We hope this Account will encourage the rational development and improvement of future MOF-based sorbents for applications in challenging gas adsorption, separations, and catalysis.

Direct Conversion of Methane to Ethylene and Acetylene over an Iron-Based Metal-Organic Framework

Conversion of methane (CH4) to ethylene (C2H4) and/or acetylene (C2H2) enables routes to a wide range of products directly from natural gas. However, high reaction temperatures and pressures are often required to activate and convert CH4 controllably, and separating C2+ products from unreacted CH4 can be challenging. Here, we report the direct conversion of CH4 to C2H4 and C2H2 driven by non-thermal plasma under ambient (25 °C and 1 atm) and flow conditions over a metal-organic framework material, MFM-300(Fe). The selectivity for the formation of C2H4 and C2H2 reaches 96% with a high time yield of 334 μmol gcat-1 h-1. At a conversion of 10%, the selectivity to C2+ hydrocarbons and time yield exceed 98% and 2056 μmol gcat-1 h-1, respectively, representing a new benchmark for conversion of CH4. In situ neutron powder diffraction, inelastic neutron scattering and solid-state nuclear magnetic resonance, electron paramagnetic resonance (EPR), and diffuse reflectance infrared Fourier transform spectroscopies, coupled with modeling studies, reveal the crucial role of Fe-O(H)-Fe sites in activating CH4 and stabilizing reaction intermediates via the formation of an Fe-O(CH3)-Fe adduct. In addition, a cascade fixed-bed system has been developed to achieve online separation of C2H4 and C2H2 from unreacted CH4 for direct use. Integrating the processes of CH4 activation, conversion, and product separation within one system opens a new avenue for natural gas utility, bridging the gap between fundamental studies and practical applications in this area.

Selective CO2 reduction to CH3OH over atomic dual-metal sites embedded in a metal-organic framework with high-energy radiation

The efficient use of renewable X/γ-rays or accelerated electrons for chemical transformation of CO2 and water to fuels holds promise for a carbon-neutral economy; however, such processes are challenging to implement and require the assistance of catalysts capable of sensitizing secondary electron scattering and providing active metal sites to bind intermediates. Here we show atomic Cu-Ni dual-metal sites embedded in a metal-organic framework enable efficient and selective CH3OH production (~98%) over multiple irradiated cycles. The usage of practical electron-beam irradiation (200 keV; 40 kGy min-1) with a cost-effective hydroxyl radical scavenger promotes CH3OH production rate to 0.27 mmol g-1 min-1. Moreover, time-resolved experiments with calculations reveal the direct generation of CO2•‒ radical anions via aqueous electrons attachment occurred on nanosecond timescale, and cascade hydrogenation steps. Our study highlights a radiolytic route to produce CH3OH with CO2 feedstock and introduces a desirable atomic structure to improve performance.

Modulation of Uptake and Reactivity of Nitrogen Dioxide in Metal-Organic Framework Materials

We report the modulation of reactivity of nitrogen dioxide (NO2 ) in a charged metal-organic framework (MOF) material, MFM-305-CH3 in which unbound N-centres are methylated and the cationic charge counter-balanced by Cl- ions in the pores. Uptake of NO2 into MFM-305-CH3 leads to reaction between NO2 and Cl- to give nitrosyl chloride (NOCl) and NO3 - anions. A high dynamic uptake of 6.58 mmol g-1 at 298 K is observed for MFM-305-CH3 as measured using a flow of 500 ppm NO2 in He. In contrast, the analogous neutral material, MFM-305, shows a much lower uptake of 2.38 mmol g-1 . The binding domains and reactivity of adsorbed NO2 molecules within MFM-305-CH3 and MFM-305 have been probed using in situ synchrotron X-ray diffraction, inelastic neutron scattering and by electron paramagnetic resonance, high-field solid-state nuclear magnetic resonance and UV/Vis spectroscopies. The design of charged porous sorbents provides a new platform to control the reactivity of corrosive air pollutants.

A metal-organic framework-supported dinuclear iron catalyst for hydroboration of carbonyl compounds

Preparation of catalytically active dinuclear transition metal complexes with an open coordination sphere is a challenging task because the metal sites tend to be "saturated" with excess donor atoms around during synthesis. By isolating the binding scaffolds with the metal-organic framework (MOF) skeleton and installing metal sites through post-synthetic modification, we succeed in constructing a MOF-supported metal catalyst, namely FICN-7-Fe2, with dinuclear Fe₂ sites. FICN-7-Fe2 effectively catalyses the hydroboration of a broad range of ketone, aldehyde, and imine substrates with a low loading of 0.05 mol%. Remarkably, kinetic measurements showed that FICN-7-Fe2 is 15 times more active than its mononuclear counterpart FICN-7-Fe1, indicating that cooperative substrate activation on the two Fe centres significantly enhances the catalysis.

One-pot solvothermal synthesis of In-doped amino-functionalized UiO-66 Zr-MOFs with enhanced ligand-to-metal charge transfer for efficient visible-light-driven CO2 reduction

Metal organic frameworks (MOFs) with high porosity and highly tunable physical/chemical properties can serve as heterogeneous catalysts for CO₂ photoreduction, but the application is hindered by the large band gap (E_g) and insufficient ligand-to-metal charge transfer (LMCT). In this study, a simple one-pot solvothermal strategy is proposed to prepare an amino-functionalized MOF (aU(Zr/In)) featuring an amino-functionalizing ligand linker and In-doped Zr-oxo clusters, which enables efficient CO₂ reduction driven with visible light. The amino functionalization leads to a significant reduction of E_g as well as a charge redistribution of the framework, allowing the absorption of visible light and the efficient separation of photogenerated carriers. Furthermore, the incorporation of In not only promotes the LMCT process by creating oxygen vacancies in Zr-oxo clusters, but also greatly lowers the energy barrier of the intermediates for CO₂-to-CO conversion. With the synergistic effects of the amino groups and the In dopants, the optimized aU(Zr/In) exhibits a CO production rate of 37.58 ± 1.06 μmol g^-1 h^-1, outperforming the isostructural University of Oslo-66- and Material of Institute Lavoisier-125-based photocatalysts. Our work demonstrates the potential of modifying MOFs with ligands and heteroatom dopants in metal-oxo clusters for solar energy conversion.

Beyond Purification: Highly Efficient and Selective Conversion of NO into Ammonia by Coupling Continuous Absorption and Photoreduction under Ambient Conditions

Although the selective catalytic reduction technology has been confirmed to be effective for nitrogen oxide (NO_x) removal, green and sustainable NO_x re-utilization under ambient conditions is still a great challenge. Herein, we develop an on-site system by coupling the continuous chemical absorption and photocatalytic reduction of NO in simulated flue gas (C_NO = 500 ppm, GHSV = 18,000 h^-1), which accomplishes an exceptional NO conversion into value-added ammonia with competitive conversion efficiency (89.05 ± 0.71%), ammonia production selectivity (95.58 ± 0.95%), and ammonia recovery efficiency (>90%) under ambient conditions. The anti-poisoning capacities, including the resistance against factors of H₂O, SO₂, and alkali/alkaline/heavy metals, are also achieved, which presents strong environmental practicability for treating NO_x in flue gas. In addition, the critical roles of corresponding chemical absorption and catalytic reduction components are also revealed by in situ characterizations. The emerging strategy herein not only achieves a milestone efficiency for sustainable NO purification but also opens a new route for contaminant resourcing in the near future of carbon neutrality.

The effects of UiO-66 ultrafine particles on the rapid detection of sulfonamides in milk: Adsorption performance and mechanism

Nanoscale MOFs particles possess both excellent adsorption and dispersion properties. In this study, ultrafine particles UiO-66 (UP/UiO-66) with a particle size below 50 nm were synthesised by a template-controlled method. UP/UiO-66 was able to achieve a maximum adsorption capacity of 139.64 mg/g for 5 methoxylated sulfonamides. Adsorption studies showed that UP/UiO-66 adsorption of sulfonamides can be classified as a pseudo-secondary kinetic adsorption model for single molecular layer adsorption. ELISA (validated by Raman and molecular docking) showed that the sulfonamide molecule was still immunoreactive with antibodies after adsorption by UP/UiO-66. In 15 min, UP/UiO-66 could be used directly in the ELISA test for sulfonamides in milk without elution and separation. The LOQ (IC₂₀) of UP/UiO-66-ELISA for sulfonamides in milk was 0.21-2.05 ng/mL. The ultrafine particle strategy of UiO-66 is expected to be applied to other MOFs and used as a general pretreatment material for residue monitoring in complex matrices.

Aligning Metal Coordination Sites in Metal-Organic Framework-Enabled Metallaphotoredox Catalysis

Construction of catalytic metal centers, the key modules in artificial photosynthetic systems, lies at the heart to explore unpaved reactivity patterns powered by light. Here, we disclose that the amino (-NH₂) and carboxylic (-COO) functionalities, aligned in various visible-light-harvesting metal-organic frameworks (MOFs) (NH₂-UiO-66, (NH₂)₂-UiO-67, and NH₂-MIL-125), provide N/O-ligated Ni featuring different configurations and valence states. Of note, these Ni centers, in situ formed or preimplanted, demonstrated coordination units' spatial arrangement-dependent activity in cross-coupling of aryl halides and various nucleophiles. Our work provides a novel approach to construct and to regulate metal center(s) by MOFs' skeleton defined coordination environments, highlighting exclusive potential in exploring the reactivity pattern of the hosted metals.

A Novel Instantaneous Self-Assembled Hollow MOF-Derived Nanodrug for Microwave Thermo-Chemotherapy in Triple-Negative Breast Cancer

Hollow materials derived from metal-organic frameworks (MOFs) have emerged in the biomedical field due to their unique properties, and different synthesis methods have been proposed. However, so far, the large-scale use of hollow MOFs is mostly limited by the timeliness of synthesis methods. Herein, we propose a new ultrasonic aerosol flow strategy for the instantaneous synthesis of a Zr-MOF-derived hollow sphere complex (ZC-HSC) in only one step. Through rapid transient heating, the coordination between metal salts and organic ligands occurs along with prompt evaporation of the solvent. The whole process lasts for only about 21 s, compared with several steps that take hours or even days for conventional synthesis methods. Based on the ZC-HSC, we designed a nanodrug with the functions of manipulating the tumor microenvironment, which can reshape the tumor microenvironment by improving tumor hypoxia and inflammatory microenvironment and promoting antiangiogenic therapy. Combined with microwave thermo-chemotherapy, the nanodrugs effectively treat triple-negative breast cancer (the tumor cell survival rate was only 34.76 and 31.05% in normoxic and hypoxic states, respectively, and the tumor inhibition rate reached 87.9% at the animal level), providing a new theoretical basis for the treatment of triple-negative breast cancer. This rapid, one-step, and continuous ultrasonic aerosol flow strategy has bright prospects in the synthesis of MOF-derived hollow materials and promotes the further development of large-scale applications of biological nanomaterials.

Oscillatory Reaction Activity of Single Cuprous Oxide Microparticles with NO2

Here, we report on using dark-field microscopy (DFM) as a simple and low-cost imaging platform to visually resolve the kinetics of single cuprous oxide (Cu₂O) microparticles for NO₂ removal in a real-time manner. Unexpectedly, we find that the redox reaction between Cu₂O microparticles and NO₂ is oscillating with the reaction time. Specifically, the oscillatory behavior of single Cu₂O microparticles for NO₂ reduction shows a large particle-to-particle variability, which is also dependent upon the NO₂ pressure and Cu₂O facets. A combined DFM imaging, spectroscopic, scanning electron microscopy, and density functional theory study uncovers that Cu₂O is gradually transformed to copper nitrate hydroxide [Cu₂(NO₃)(OH)₃], and this oscillatory reaction is attributed to the cyclic formation and structural collapse of Cu₂(NO₃)(OH)₃. The present findings open an alternative avenue for probing structure-performance relationships, which are anticipated to benefit the creation of functional materials for air purification.

Creating High-Number Defect Sites through a Bimetal Approach in Metal-Organic Frameworks for Boosting Trace SO2 Removal

Herein, we represent a bimetallic approach to enhance the defect number, leading to eight defect sites per node in a metal-organic framework, showing both a higher SO₂ adsorption capacity and higher SO₂/CO₂ selectivity. The results can be further strongly supported by density functional theory calculations.

A Spectroscopically Observed Iron Nitrosyl Intermediate in the Reduction of Nitrate by a Surface-Conjugated Electrocatalyst

We report an iron-based graphite-conjugated electrocatalyst (GCC-FeDIM) that combines the well-defined nature of homogeneous molecular electrocatalysts with the robustness of a heterogeneous electrode. A suite of spectroscopic methods, supported by the results of DFT calculations, reveals that the electrode surface is functionalized by high spin (S = 5/2) Fe(III) ions in an FeN₄Cl₂ coordination environment. The chloride ions are hydrolyzed in aqueous solution, with the resulting cyclic voltammogram revealing a Gaussian-shaped wave assigned to 1H⁺/1e^- reduction of surface Fe(III)-OH surface. A catalytic wave is observed in the presence of NO₃^-, with an onset potential of -1.1 V vs SCE. At pH 6.0, GCC-FeDIM rapidly reduces NO₃^- to ammonium and nitrite with 88 and 6% Faradaic efficiency, respectively. Mechanistic studies, including in situ X-ray absorption spectroscopy, suggest that electrocatalytic NO₃^- reduction involves an iron nitrosyl intermediate. The Fe-N bond length (1.65 Å) is similar to that observed in {Fe(NO)}⁶ complexes, which is supported by the results of DFT calculations.

Structural and Dynamic Analysis of Sulphur Dioxide Adsorption in a Series of Zirconium-Based Metal-Organic Frameworks

We report reversible high capacity adsorption of SO2 in robust Zr-based metal-organic framework (MOF) materials. Zr-bptc (H4 bptc=biphenyl-3,3',5,5'-tetracarboxylic acid) shows a high SO2 uptake of 6.2 mmol g-1 at 0.1 bar and 298 K, reflecting excellent capture capability and removal of SO2 at low concentration (2500 ppm). Dynamic breakthrough experiments confirm that the introduction of amine, atomically-dispersed CuII or heteroatomic sulphur sites into the pores enhance the capture of SO2 at low concentrations. The captured SO2 can be converted quantitatively to a pharmaceutical intermediate, aryl N-aminosulfonamide, thus converting waste to chemical values. In situ X-ray diffraction, infrared micro-spectroscopy and inelastic neutron scattering enable the visualisation of the binding domains of adsorbed SO2 molecules and host-guest binding dynamics in these materials at the atomic level. Refinement of the pore environment plays a critical role in designing efficient sorbent materials.

Electrocatalysis in Room Temperature Sodium-Sulfur Batteries: Tunable Pathway of Sulfur Speciation

Benefiting from the merits of natural abundance, low cost, and ultrahigh theoretical energy density, the room temperature sodium-sulfur (RT NaS) batteries are regarded as one of the promising candidates for the next-generation scalable energy storage devices. However, the uncontrollable sulfur speciation pathways severely hinder its practical applications. Recently, various strategies have been employed to tune the conversion pathways of sulfur, such as physical confinement, chemical inhibition, and electrocatalysis. Herein, the recent advances in electrocatalytic effects manipulate sulfur speciation pathways in advanced RT NaS electrochemistry are reviewed, including the promotion of the nearly full conversion of long-chain polysulfides, short-chain polysulfides, and small sulfur molecules. The underlying catalytic modulation mechanism that fundamentally tunes the electrochemical pathway of sulfur species is comprehensively summarized along with the design strategies for catalytic active centers. Furthermore, the challenge and potential solutions to realize the quasi-solid conversion of sulfur are proposed to accelerate the real application of RT NaS batteries.

Copper(II) invigorated EHU-30 for continuous electroreduction of CO2 into value-added chemicals

The doping of zirconium based EHU-30 and EHU-30-NH₂ metal-organic frameworks with copper(II) yielded a homogeneous distribution of the dopant with a copper/zirconium ratio of 0.04-0.05. The doping mechanism is analysed by chemical analysis, microstructural analysis and pair distribution function (PDF) analysis of synchrotron total scattering data in order to get deeper insight into the local structure. According to these data, the Cu(II) atoms are assembled within the secondary building unit by a transmetalation reaction, contrarily to UiO-66 series in which the post-synthetic metalation of the MOF takes place through chemical anchorage. The resulting materials doubled the overall performance of the parent compounds for the CO₂ electroreduction, while retained stable the performance during continuous transformation reaction.

Direct Observation of Ammonia Storage in UiO-66 Incorporating Cu(II) Binding Sites

The presence of active sites in metal-organic framework (MOF) materials can control and affect their performance significantly in adsorption and catalysis. However, revealing the interactions between the substrate and active sites in MOFs at atomic precision remains a challenging task. Here, we report the direct observation of binding of NH3 in a series of UiO-66 materials containing atomically dispersed defects and open Cu(I) and Cu(II) sites. While all MOFs in this series exhibit similar surface areas (1111-1135 m2 g-1), decoration of the -OH site in UiO-66-defect with Cu(II) results in a 43% enhancement of the isothermal uptake of NH3 at 273 K and 1.0 bar from 11.8 in UiO-66-defect to 16.9 mmol g-1 in UiO-66-CuII. A 100% enhancement of dynamic adsorption of NH3 at a concentration level of 630 ppm from 2.07 mmol g-1 in UiO-66-defect to 4.15 mmol g-1 in UiO-66-CuII at 298 K is observed. In situ neutron powder diffraction, inelastic neutron scattering, and electron paramagnetic resonance, solid-state nuclear magnetic resonance, and infrared spectroscopies, coupled with modeling reveal that the enhanced NH3 uptake in UiO-66-CuII originates from a {Cu(II)···NH3} interaction, with a reversible change in geometry at Cu(II) from near-linear to trigonal coordination. This work represents the first example of structural elucidation of NH3 binding in MOFs containing open metal sites and will inform the design of new efficient MOF sorbents by targeted control of active sites for NH3 capture and storage.

High-yield halide-assisted synthesis of metal-organic framework UiO-based nanocarriers

The synthesis of nanosized metal-organic frameworks (NMOFs) is requisite for their application as injectable drug delivery systems (DDSs) and other biorelevant purposes. Herein, we have critically examined the role of different synthetic parameters leading to the production of UiO-66 crystals smaller than 100 nm. Of note, we demonstrate the co-modulator role conferred by halide ions, not only to produce NMOFs with precise morphology and size, but also to significantly improve the reaction yield. The resulting NMOFs are highly crystalline and exhibit sustained colloidal stability in different biologically relevant media. As a proof of concept, these NMOFs were loaded with Rhodamine 6G (R6G), which remained trapped in most common biologically relevant media. When incubated with living mammalian cells, the R6G-loaded NMOFs were efficiently internalized and did not impair cell viability even at relatively high doses.

Cobalt Metal-Organic Frameworks with Aggregation-Induced Emission Characteristics for Fluorometric/Colorimetric Dual Channel Detection of Nitrogen-Rich Heterocyclic Compounds

Nitrogen-rich heterocyclic compounds (NRHCs) are an emerging type of explosive, and their quantification is important in national security inspection and environmental monitoring. Up until now, designing an efficient NRHCs sensing strategy was still in the early stages. Herein, a new metal-organic framework (MOF) with aggregation-induced emission (AIE) characteristics is synthesized with fluorometric/colorimetric responses for rapid and selective detection of NRHCs. The nonemissive probe is designed with tetraphenylethylene derivative as the linker and Co as the node, quencher, and color-changing agent. Cobalt AIE-MOF exhibits a turn-on emission enhancement due to the competitive coordination substitution between NRHCs and the scaffold as well as the following AIE process of the liberative linkers. Meanwhile, the color appearance of the probe changes from blue to yellow based on the dissociation of the original Co coordinating system. Using this dual-mode probe, single- and dual-ring NRHCs are successfully detected from 5 μM to 7.5 mM within 25 s. The cobalt AIE-MOF exhibits excellent selectivity of NRHCs against a variety of interferences, providing a promising tool for designing a multichannel detection strategy.

Confining Natural/Mimetic Enzyme Cascade in an Amorphous Metal-Organic Framework for the Construction of Recyclable Biomaterials with Catalytic Activity

Integrating nanozymes with natural enzymes to form cascade reactions is one of the most promising ways to develop biocatalysts with versatile performance; however, the applicability of the cascade is typically hampered by the instability of enzymes and the hindrance of mass transfer in the host environment. Utilizing amorphous ZIF-90 (aZIF-90) as a host material, herein, we have reported a one-pot way to encapsulate glucose oxidase (GOx) and magnetic nanoparticles (MNP) to form GOx/MNP@aZIF-90. We reasoned that the amorphous structure of ZIF-90 not only provides a protected environment to confine the cascade reaction but also generates mesopores and internal voids to improve the performance of the enzymatic cascade. The catalytic activity of aZIF-90 was almost 4 times higher than that of crystalline composites, and the residual activity was higher than 80% after being stored for 9 days. This is the first time that GOx and MNP were simultaneously confined in aZIF-90 with mesopores, which suggested that an amorphous metal-organic framework is promising in the development of an enzymatic cascade.

Tandem ZnCo-porphyrin metal–organic frameworks for enhanced photoreduction of CO2

A bimetallic ZnCo-porphyrin metal–organic framework (ZnCo-BMOF) nanosheet comprised of photosensitizers (Zn porphyrin) and catalysts (Co porphyrin) was developed for efficient photoreduction of CO2 to CO.

MOF Encapsulating N-Heterocyclic Carbene-Ligated Copper Single-Atom Site Catalyst towards Efficient Methane Electrosynthesis

The exploitation of highly efficient carbon dioxide reduction (CO₂ RR) electrocatalyst for methane (CH₄ ) electrosynthesis has attracted great attention for the intermittent renewable electricity storage but remains challenging. Here, N-heterocyclic carbene (NHC)-ligated copper single atom site (Cu SAS) embedded in metal-organic framework is reported (2Bn-Cu@UiO-67), which can achieve an outstanding Faradaic efficiency (FE) of 81 % for the CO₂ reduction to CH₄ at -1.5 V vs. RHE with a current density of 420 mA cm^-2 . The CH₄ FE of our catalyst remains above 70 % within a wide potential range and achieves an unprecedented turnover frequency (TOF) of 16.3 s^-1 . The σ donation of NHC enriches the surface electron density of Cu SAS and promotes the preferential adsorption of CHO* intermediates. The porosity of the catalyst facilitates the diffusion of CO₂ to 2Bn-Cu, significantly increasing the availability of each catalytic center.