Rational Design of Molecular Ferroelectrics with Negatively Charged Domain Walls

Synergistic Control of Ferroelectric and Optical Properties in Molecular Ferroelectric for Multiplexing Nonvolatile Memory

Utilizing the correlation among diverse physical properties to facilitate multiplexing and multistate memory is anticipated to emerge as an efficient strategy to enhance memory capacity, achieve device miniaturization, and ensure information security. As an important functional material, ferroelectrics have long been considered as a potential candidate in multistate memory devices. Furthermore, the integration of optical response offers an alternative path to realizing multiplexing features, further enhancing the versatility and efficiency of these devices. However, combining ferroelectricity and optical activity is always challenging because ferroelectricity is very sensitive to the crystal structure. In this study, on the correlation between ferroelectric polarization (FP) and optical properties in molecular ferroelectric material, trimethylchloromethyl ammonium trichloromanganese (TMCM-MnCl3) is reported. This research demonstrated that the FP can modulate the photoluminescence (PL) emission, while optical illumination can trigger FP reversal. Based on these, both electric-writing optical-reading (EWOR) and optical-writing electrical-reading (OWER) modes have been conclusively established, and the seamless transition between these two modes can be achieved by adjusting the excitation light intensity. These findings reveal an intriguing physical interconnection and imply the viability of implementing multiplexing and multistate memory functionalities in systems based on ferroelectrics.

The First Molecular Ferroelectric Mott Insulator

With the discovery of colossal magnetoresistance materials and high-temperature superconductors, Mott insulators can potentially undergo a transition from insulating state to metallic state. Here, in molecular ferroelectrics system, a Mott insulator of (C7H14N)3V12O30 has been first synthesized, which is a 2D organic-inorganic ferroelectric with composition of layered vanadium oxide and quinuclidine ring. Interestingly, accompanied by the ferroelectric phase transition, (C7H14N)3V12O30 changes sharply in conductivity. The occurrence of a Mott transition has been proven by electric transport measurements and theoretical calculations. This research has significantly expanded the applicative horizons of ferroelectric materials, and offering an ideal platform for the investigation of strongly correlated electron systems.

Molecular ferroelectric self-assembled interlayer for efficient perovskite solar cells

The interfacial molecular dipole enhances the photovoltaic performance of perovskite solar cells (PSCs) by facilitating improved charge extraction. However, conventional self-assembled monolayers (SAMs) face challenges like inadequate interface coverage and weak dipole interactions. Herein, we develop a strategy using a self-assembled ferroelectric layer to modify the interfacial properties of PSCs. Specifically, we employ 1-adamantanamine hydroiodide (ADAI) to establish robust chemical interactions and create a dipole layer over the perovskite. The oriented molecular packing and spontaneous polarity of ferroelectric ADAI generate a substantial interfacial dipole, adjusting band bending at the anode, reducing band misalignment, and suppressing charge recombination. Consequently, our formamidinium lead iodide-based conventional PSC achieves efficiencies of 25.13% (0.06 cm2) and 23.5% (1.00 cm2) while exhibiting enhanced stability. Notably, we demonstrate an impressive efficiency of 25.59% (certified at 25.36%) in a 0.06 cm2 area for the inverted champion device, showcasing the promise of ferroelectric SAMs for PSCs performance enhancement.

A molecular ferroelectric thin film of imidazolium perchlorate on silicon

Molecular ferroelectrics have garnered significant attention due to their structural tunability, low synthesis temperature, and high flexibility. Herein, we successfully synthesized imidazole perchlorate (ImClO4) single crystals and high-quality, highly-oriented thin films on Si substrates. These films demonstrated a high inverse piezoelectric coefficient of 55.7 pm/V. Two types of domain bands were observed: type-I bands tilted ~60° relative to the horizontal axis, and type-II bands positioned perpendicular to the horizontal axis. Under a + 20 V bias, type-I bands showed a reduction and detachment of 180° domain walls to form a needle-like domain. It extended toward the band boundary after applying -20 V bias, which grew along the boundary upon contact. In contrast, type-II bands showed straight domain wall motion and displayed a higher piezoresponse than type-I bands. The growth of  high quality molecular ferroelectric thin films on Si substrates paves the way for the development of on-chip devices.

Discovery of molecular ferroelectric catalytic annulation for quinolines

Ferroelectrics as emerging and attractive catalysts have shown tremendous potential for applications including wastewater treatment, hydrogen production, nitrogen fixation, and organic synthesis, etc. In this study, we demonstrate that molecular ferroelectric crystal TMCM-CdCl3 (TMCM = trimethylchloromethylammonium) with multiaxial ferroelectricity and superior piezoelectricity has an effective catalytic activity on the direct construction of the pharmacologically important substituted quinoline derivatives via one-pot [3 + 2 + 1] annulation of anilines and terminal alkynes by using N,N-dimethylformamide (DMF) as the carbon source. The recrystallized TMCM-CdCl3 crystals from DMF remain well ferroelectricity and piezoelectricity. Upon ultrasonic condition, periodic changes in polarization contribute to the release of free charges from the surface of the ferroelectric domains in nano size, which then quickly interacts with the substrates in the solution to trigger the pivotal redox process. Our work advances the molecular ferroelectric crystal as a catalytic route to organic synthesis, not only providing valuable direction for molecular ferroelectrics but also further enriching the executable range of ferroelectric catalysis.

Enhancement of phase transition temperature through hydrogen bond modification in molecular ferroelectrics

Molecular ferroelectrics are attracting great interest due to their light weight, mechanical flexibility, low cost, ease of processing and environmental friendliness. These advantages make molecular ferroelectrics viable alternatives or supplements to inorganic ceramics and polymer ferroelectrics. It is expected that molecular ferroelectrics with good performance can be fabricated, which in turns calls for effective chemical design strategies in crystal engineering. To achieve so, we propose a hydrogen bond modification method by introducing the hydroxyl group, and successfully boost the phase transition temperature (Tc) by at least 336 K. As a result, the molecular ferroelectric 1-hydroxy-3-adamantanammonium tetrafluoroborate [(HaaOH)BF4] can maintain ferroelectricity until 528 K, a Tc value much larger than that of BTO (390 K). Meanwhile, micro-domain patterns, in stable state for 2 years, can be directly written on the film of (HaaOH)BF4. In this respect, hydrogen bond modification is a feasible and effective strategy for designing molecular ferroelectrics with high Tc and stable ferroelectric domains. Such an organic molecule with varied modification sites and the precise crystal engineering can provide an efficient route to enrich high-Tc ferroelectrics with various physical properties.

High-Temperature Phase Transition with Switchable Dielectric Behavior and Significant Photoluminescence Changes in a Zero-Dimensional Hybrid SbBr6 Perovskite

In the past decade, metal halide materials have been favored by many researchers because of their excellent physical and chemical properties under thermal, electrical, and light stimuli, such as ferroelectricity, dielectric, nonlinearity, fluorescence, and semiconductors, greatly promoting their application in optoelectronic devices. In this study, we successfully constructed an unleaded organic-inorganic hybrid perovskite crystal: [Cl-C6H4-(CH2)2NH3]3SbBr6 (1), which underwent a high-temperature reversible phase transition near Tp = 368 K. The phase transition behavior of 1 was characterized by differential scanning calorimetry, accompanied by a thermal hysteresis of 6 K. In addition, variable-temperature Raman spectroscopy analysis and PXRD further verified the sensitivity of 1 to temperature and the phase transition from low symmetry to high symmetry. Temperature-dependent dielectric testing shows that 1 can be a sensitive switching dielectric constant switching material. Remarkably, 1 exhibits strong photoluminescence emission with a wavelength of 478 nm and a narrow band gap of 2.7 eV in semiconductors. As the temperature increases and decreases, fluorescence undergoes significant changes, especially near Tc, which further confirms the reversible phase transition of 1. All of these findings provide new avenues for designing and assembling new phase change materials with high Tp and photoluminescence properties.

Volume-Confined Fabrication of Large-Scale Single-Crystalline Molecular Ferroelectric Thin Films and Their Applications in 2D Materials

With outstanding advantages of chemical synthesis, structural diversity, and mechanical flexibility, molecular ferroelectrics have attracted increasing attention, demonstrating themselves as promising candidates for next-generation wearable electronics and flexible devices in the film form. However, it remains a challenge to grow high-quality thin films of molecular ferroelectrics. To address the above issue, a volume-confined method is utilized to achieve ultrasmooth single-crystal molecular ferroelectric thin films at the sub-centimeter scale, with the thickness controlled in the range of 100-1000 nm. More importantly, the preparation method is applicable to most molecular ferroelectrics and has no dependency on substrates, showing excellent reproducibility and universality. To demonstrate the application potential, two-dimensional (2D) transitional metal dichalcogenide semiconductor/molecular ferroelectric heterostructures are prepared and investigated by optical spectroscopic method, proving the possibility of integrating molecular ferroelectrics with 2D layered materials. These results may unlock the potential for preparing and developing high-performance devices based on molecular ferroelectric thin films.

Revealing the Polarizations of Molecular Ferroelectrics via SHG Polarimetry at the Nanoscale

Multifarious molecular ferroelectrics with multipolar axial characteristics have emerged in recent years, enriching the scenarios for energy harvesting, sensing, and information processing. The increased polar axes have enhanced the urgency of distinguishing different polarization states in material design, mechanism exploration, etc. However, conventional methods hardly meet the requirements of in situ, fast, microscale, contactless, and nondestructive features due to their inherent limitations. Herein, SHG polarimetry is introduced to probe the multioriented polarizations on a nanosized multiaxial molecular ferroelectric, i.e., TMCM-CdCl3 nanoplates, as an example. Combined with the analysis of the second-order susceptibility tensor, SHG polarimetry could serve as an effective method to detect the polarization orders and domain distributions of molecular ferroelectrics. Profiting from the full-optical feature, SHG polarimetry can even be performed on samples covered by transparent mediums, 2D materials, or thin metal electrodes. Our research might spark further fundamental studies and expand the application boundaries of next-generation ferroelectric materials.

The First Demonstration of Strain-Controlled Periodic Ferroelectric Domains with Superior Piezoelectric Response in Molecular Materials

Achieving a periodic domain structure in ferroelectric materials to tailor the macroscopic properties or realize new functions has always been a hot topic. However, methods to construct periodic domain structures, such as epitaxial growth, direct writing by scanning tips, and the patterned electrode method, are difficult or inefficient to implement in emerging molecular ferroelectrics, which have the advantages of lightweight, flexibility, biocompatibility, etc. An efficient method for constructing and controlling periodic domain structures is urgently needed to facilitate the development of molecular ferroelectrics in nanoelectronic devices. In this work, it is demonstrated that large-area, periodic and controllable needle-like domain structures can be achieved in thin films of the molecular ferroelectric trimethylchloromethyl ammonium trichlorocadmium (TMCM-CdCl₃ ) upon the application of tensile strain. The domain evolution under various tensile strains can be clearly observed, and such processes are accordingly identified. Furthermore, the domain wall exhibits a superior piezoelectric response, with up to fivefold enhancement compared to that of the pristine samples. Such large-area tunable periodic domain structure and abnormally strong piezoresponse are not only of great interests in fundamental studies, but also highly important in the future applications in functional molecular materials.

Fluorination Enables Dual Ferroelectricity in Both Solid- and Liquid-Crystal Phases

Ferroelectric materials are a special type of polar substances, including solids or liquid crystals. However, obtaining a material to be ferroelectric in both its solid crystal (SC) and liquid crystal (LC) phases is a great challenge. Moreover, although cholesteric LCs inherently possess the advantage of high fluidity, their ferroelectricity remains unknown. Here, through the reasonable H/F substitution on the fourth position of the phenyl group of the parent nonferroelectric dihydrocholesteryl benzoate, we designed ferroelectric dihydrocholesteryl 4-fluorobenzoate (4-F-BDC), which shows ferroelectricity in both SC and cholesteric LC phases. The fluorination induces a lower symmetric polar P1 space group and a new solid-to-solid phase transition in 4-F-BDC. Beneficial from fluorination, the SC and cholesteric LC phases of 4-F-BDC show clear ferroelectricity, as confirmed by well-shaped polarization-voltage hysteresis loops. The dual ferroelectricity in both SC and cholesteric LC phases of a single material was rarely found. This work offers a viable case for the exploration of the interplay between ferroelectric SC and LC phases and provides an efficient approach for designing ferroelectrics with dual ferroelectricity and cholesteric ferroelectric liquid crystals.

Acquiring Bulk Anomalous Photovoltaic Effect in Single Crystals of a Lead-Free Double Perovskite with Aromatic and Alkali Mixed-Cations

The bulk anomalous photovoltaic (BAPV) effect of acentric materials refers to a distinct concept from traditional semiconductor-based devices, of which the above-bandgap photovoltage hints at a promise for solar-energy conversion. However, it is still a challenge to exploit new BAPV-active systems due to the lacking of knowledge on the structural origin of this concept. BAPV effects in single crystals of a 2D lead-free double perovskite, (BBA)₂ CsAgBiBr₇ (1, BBA = 4-bromobenzylammonium), tailored by mixing aromatic and alkali cations in the confined architecture to form electric polarization are acquired here. Strikingly, BAPV effects manifested by above-bandgap photovoltage (V_OC ) show unique attributes of directional anisotropy and positive dependence on electrode spacing. The driving source stems from orientations of the polar aromatic spacer and Cs⁺ ion drift, being different from the known built-in asymmetry photovoltaic heterojunctions. As the first demonstration of the BAPV effect in the double perovskites, the results will enrich the family of environmentally green BAPV-active candidates and further facilitate their new optoelectronic application.

1D Chiral Lead Bromide Perovskite with Superior Second-Order Optical Nonlinearity, Photoluminescence, and High-Temperature Reversible Phase Transition

Multifunctional materials are an attractive research area. Organic-inorganic hybrid perovskites are widely used in the design of these materials due to their rich properties and flexible composition. It is easy to obtain more photoelectric properties by introducing chiral groups as ligands. In this work, we synthesized chiral one-dimensional organic-inorganic hybrid perovskites, namely (R/S-3-HP)PbBr₃ (1R/1S) (3-HP=3-hydroxy-piperidine). The enantiomer compounds undergo reversible phase transition at 349/336 K. Under the excitation light of 339 nm, 1R and 1S have a wide emission peak at 635 nm, showing orange light. In addition, the indirect bandgap is 3.29 eV and the SHG intensity is comparable to that of KDP. This work provides a way to design multifunctional chiral perovskite materials.