Hierarchical N-Doped Carbon as CO2 Adsorbent with High CO2 Selectivity from Rationally Designed Polypyrrole Precursor

A robust triphenylamine-based monolithic polymer network for selective sieving of CO2 and PM from flue gas

The increasingly urgent issue of climate change is driving the development of carbon dioxide (CO2) capture and separation technologies in flue gas after combustion. The monolithic adsorbent stands out in practical adsorption applications for its simplified powder compaction process while maintaining the inherent balance between energy consumption for regeneration and selectivity for adsorption. However, optimizing the adsorption capacity and selectivity of CO2 separation materials remains a significant challenge. Herein, we synthesized monolithic polymer networks (N-CMPs) with triphenylamine adsorption sites, acid-base environment tolerance, and precise narrow microchannel pore systems for the selective sieving of CO2 and particulate matter (PM) in flue gas. The inherent continuous covalent bonding of N-CMPs, along with their highly delocalized π-π conjugated porous framework, ensures the stability of the monolithic polymer network's adsorption and separation capabilities under wet and acid-base conditions. Specifically, under the conditions of 1 bar at 273 K, the CO2 adsorption capacity of N-CMP-1 is 3.35 mmol/g. Attributed to the highly polar environment generated by triphenylamine and the inherent high micropore/mesopore ratio, N-CMPs exhibit an excellent ideal adsorbed solution theory (IAST) selectivity for CO2/N2 under simulated flue gas conditions (CO2/N2 = 15:85). Dynamic breakthrough experiments further visualize the high separation efficiency of N-CMPs in practical adsorption applications. Moreover, under acid-base conditions, N-CMPs achieve a capture efficiency exceeding 99.76 % for PM0.3, enabling the selective separation of CO2 and PM in flue gas. In fact, the combined capture of hazardous PM and CO2 from the exhaust gases produced by the combustion of fossil fuels will play a pivotal role in mitigating climate change and environmental issues until low-carbon and alternative energy technologies are widely adopted.

A novel 3D nitrogen-doped porous carbon supported Fe-Cu bimetallic nanoparticles composite derived from lignin: an efficient peroxymonosulfate activator for naphthalene degradation

A novel 3D nitrogen-doped porous carbon supported Fe-Cu bimetallic nanoparticles composite (Fe-Cu-N-PC) was prepared via direct pyrolysis by employing black liquor lignin as a main precursor, and it was utilized as a novel catalyst for PMS activation in degrading naphthalene. Under the optimum experimental conditions, the naphthalene degradation rate was up to 93.2% within 60 min in the Fe-Cu-N-PC/PMS system. The porous carbon framework of Fe-Cu-N-PC could facilitate the quick molecule diffusion of reactants towards the inner bimetallic nanoparticles and enriched naphthalene molecules from the solution by a specific adsorption, which increased the odds of contact between naphthalene and reactive oxygen species and improved the reaction efficiency. The quenching reaction proved that the non-free radical pathway dominated by 1O2 was the main way in naphthalene degradation, while the free radical pathway involving SO4·- and ·OH only played a secondary role. Moreover, owing to its high magnetization performance, Fe-Cu-N-PC could be magnetically recovered and maintained excellent naphthalene degradation rate after four degradation cycles. This research will offer a theoretical basis for the construction of facile, efficient, and green technologies to remediate persistent organic pollutants in the environment.

Activated nanosulfur for broad-spectrum heavy metals capture

Current problems of existing heavy metal-removing technologies, especially for nanomaterials-based ones, are typically single metal ion-specific, high-cost and collected difficult. Herein, facile modification of commercial sulfur creates a versatile adsorbent platform to address challenges. The versatile adsorbent can be easily prepared through solvothermal treatment of a saturated commercial sulfur solution, followed by water precipitation on a commercial foam that eliminates the need for separation. Interestingly, the solvothermal treatment endows the resulting nanosulfur with sulfate acid groups (hard Lewis base), sulfur anions (soft base), and sulfite groups (borderline base), promising the coordination of all types of heavy metal ions (Lewis acids). As such, this versatile adsorbent with well-distributed adsorption sites exhibits highly effective heavy metal adsorption capacity towards diverse heavy metal ions for both single-component and multi-component adsorption, including soft, hard, borderline Lewis metal ions, with ultra-high adsorption ability (e.g., 903.79 mg g-1 for Cu2+). These findings highlighted the potential of this low-cost sulfur-based adsorbent to address the arising challenges in ensuring clean water.

Sorption of Soil Carbon Dioxide by Biochar and Engineered Porous Carbons

CO2 is 45 to 50 times more concentrated in soil than in air, resulting in global diffusive fluxes that outpace fossil fuel combustion by an order of magnitude. Despite the scale of soil CO2 emissions, soil-based climate change mitigation strategies are underdeveloped. Existing approaches, such as enhanced weathering and sustainable land management, show promise but continue to face deployment barriers. We introduce an alternative approach: the use of solid adsorbents to directly capture CO2 in soils. Biomass-derived adsorbents could exploit favorable soil CO2 adsorption thermodynamics while also sequestering solid carbon. Despite this potential, previous study of porous carbon CO2 adsorption is mostly limited to single-component measurements and conditions irrelevant to soil. Here, we probe sorption under simplified soil conditions (0.2 to 3% CO2 in balance air at ambient temperature and pressure) and provide physical and chemical characterization data to correlate material properties to sorption performance. We show that minimally engineered pyrogenic carbons exhibit CO2 sorption capacities comparable to or greater than those of advanced sorbent materials. Compared to textural features, sorbent carbon bond morphology substantially influences low-pressure CO2 adsorption. Our findings enhance understanding of gas adsorption on porous carbons and inform the development of effective soil-based climate change mitigation approaches.

Nitrogen-Doped Starbons®: Methodology Development and Carbon Dioxide Capture Capability

Five nitrogen sources (glycine, β-alanine, urea, melamine and nicotinamide) and three heating methods (thermal, monomodal microwave and multimodal microwave) are used to prepare nitrogen-doped Starbons® derived from starch. The materials are initially produced at 250-300 °C (SNx 300y ), then heated in vacuo to 800 °C to produce nitrogen-doped SNx 800y 's. Melamine gives the highest nitrogen incorporation without destroying the Starbon® pore structure and the microwave heating methods give higher nitrogen incorporations than thermal heating. The carbon dioxide adsorption capacities of the nitrogen-doped Starbons® determined gravimetrically, in many cases exceed those of S300 and S800. The carbon dioxide, nitrogen and methane adsorption isotherms of the most promising materials are measured volumetrically. Most of the nitrogen-doped materials show higher carbon dioxide adsorption capacities than S800, but lower methane and nitrogen adsorption capacities. As a result, the nitrogen-doped Starbons® exhibit significantly enhanced carbon dioxide versus nitrogen and methane versus nitrogen selectivities compared to S800.

Kraft Lignin-Derived Microporous Nitrogen-Doped Carbon Adsorbent for Air and Water Purification

The study presents a streamlined one-step process for producing highly porous, metal-free, N-doped activated carbon (N-AC) for CO2 capture and herbicide removal from simulated industrially polluted and real environmental systems. N-AC was prepared from kraft lignin─a carbon-rich and abundant byproduct of the pulp industry, using nitric acid as the activator and urea as the N-dopant. The reported carbonization process under a nitrogen atmosphere renders a product with a high yield of 30% even at high temperatures up to 800 °C. N-AC exhibited a substantial high N content (4-5%), the presence of aliphatic and phenolic OH groups, and a notable absence of carboxylic groups, as confirmed by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and Boehm's titration. Porosity analysis indicated that micropores constituted the majority of the pore structure, with 86% of pores having diameters less than 0.6 nm. According to BET adsorption analysis, the developed porous structure of N-AC boasted a substantial specific surface area of 1000 m2 g-1. N-AC proved to be a promising adsorbent for air and water purification. Specifically, N-AC exhibited a strong affinity for CO2, with an adsorption capacity of 1.4 mmol g-1 at 0.15 bar and 20 °C, and it demonstrated the highest selectivity over N2 from the simulated flue gas system (27.3 mmol g-1 for 15:85 v/v CO2/N2 at 20 °C) among all previously reported nitrogen-doped AC materials from kraft lignin. Moreover, N-AC displayed excellent reusability and efficient CO2 release, maintaining an adsorption capacity of 3.1 mmol g-1 (at 1 bar and 25 °C) over 10 consecutive adsorption-desorption cycles, confirming N-AC as a useful material for CO2 storage and utilization. The unique cationic nature of N-AC enhanced the adsorption of herbicides in neutral and weakly basic environments, which is relevant for real waters. It exhibited an impressive adsorption capacity for the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) at 96 ± 6 mg g-1 under pH 6 and 25 °C according to the Langmuir-Freundlich model. Notably, N-AC preserves its high adsorption capacity toward 2,4-D from simulated groundwater and runoff from tomato greenhouse, while performance in real samples from Fyris river in Uppsala, Sweden, causes a decrease of only 4-5%. Owing to the one-step process, high yield, annual abundance of kraft lignin, and use of environmentally friendly activating agents, N-AC has substantial potential for large-scale industrial applications.

Natural Products Derived Porous Carbons for CO2 Capture

As it is now established that global warming and climate change are a reality, international investments are pouring in and rightfully so for climate change mitigation. Carbon capture and separation (CCS) is therefore gaining paramount importance as it is considered one of the powerful solutions for global warming. Sorption on porous materials is a promising alternative to traditional carbon dioxide (CO2 ) capture technologies. Owing to their sustainable availability, economic viability, and important recyclability, natural products-derived porous carbons have emerged as favorable and competitive materials for CO2 sorption. Furthermore, the fabrication of high-quality value-added functional porous carbon-based materials using renewable precursors and waste materials is an environmentally friendly approach. This review provides crucial insights and analyses to enhance the understanding of the application of porous carbons in CO2 capture. Various methods for the synthesis of porous carbon, their structural characterization, and parameters that influence their sorption properties are discussed. The review also delves into the utilization of molecular dynamics (MD), Monte Carlo (MC), density functional theory (DFT), and machine learning techniques for simulating adsorption and validating experimental results. Lastly, the review provides future outlook and research directions for progressing the use of natural products-derived porous carbons for CO2 capture.

Effective CO2 capture by in-situ nitrogen-doped nanoporous carbon derived from waste antibiotic fermentation residues

It is of great environmental benefit to rationally dispose of and utilize antibiotic fermentation residues. In this study, oxytetracycline fermentation residue was transformed into an in-situ nitrogen-doped nanoporous carbon material with high CO2 adsorption performance by low-temperature pyrolysis pre-carbonization coupled with pyrolytic activation. The results indicated the activation under mild conditions (600 °C, KOH/OC = 2) was able to increase micropores and reduce the loss of in-situ nitrogen content. The developed microporous structure was beneficial for the filling adsorption of CO2, and the in-situ nitrogen doping in a high oxygen-containing carbon framework also strengthened the electrostatic adsorption with CO2. The maximum CO2 adsorption reached 4.38 mmol g-1 and 6.40 mmol g-1 at 25 °C and 0 °C (1 bar), respectively, with high CO2/N2 selectivity (32/1) and excellent reusability (decreased by 4% after 5 cycles). This study demonstrates the good application potential of oxytetracycline fermentation residue as in-situ nitrogen-doped nanoporous carbon materials for CO2 capture.

Exploring the capture and desorption of CO2 on graphene oxide foams supported by computational calculations

In the last decade, the highest levels of greenhouse gases (GHG) in the atmosphere have been recorded, with carbon dioxide (CO2) being one of the GHGs that most concerns mankind due to the rate at which it is generated on the planet. Given its long time of permanence in the atmosphere (between 100 to 150 years); this has deployed research in the scientific field focused on the absorption and desorption of CO2 in the atmosphere. This work presents the study of CO2 adsorption employing materials based on graphene oxide (GO), such as GO foams with different oxidation percentages (3.00%, 5.25%, and 9.00%) in their structure, obtained via an environmentally friendly method. The characterization of CO2 adsorption was carried out in a closed system, within which were placed the GO foams and other CO2 adsorbent materials (zeolite and silica gel). Through a controlled chemical reaction, production of CO2 was conducted to obtain CO2 concentration curves inside the system and calculate from these the efficiency, obtained between 86.28 and 92.20%, yield between 60.10 and 99.50%, and effectiveness of CO2 adsorption of the materials under study. The results obtained suggest that GO foams are a promising material for carbon capture and the future development of a new clean technology, given their highest CO2 adsorption efficiency and yield.

Nanostructured Carbon-Doped BN for CO2 Capture Applications

Carbon-doped boron nitride (denoted by BN/C) was prepared through the pyrolysis at 1100 °C of a nanostructured mixture of an alkyl amine borane adduct and ammonia borane. The alkyl amine borane adduct acts as a soft template to obtain nanospheres. This bottom-up approach for the synthesis of nanostructured BN/C is relatively simple and compelling. It allows the structure obtained during the emulsion process to be kept. The final BN/C materials are microporous, with interconnected pores in the nanometer range (0.8 nm), a large specific surface area of up to 767 m2·g-1 and a pore volume of 0.32 cm3·g-1. The gas sorption studied with CO2 demonstrated an appealing uptake of 3.43 mmol·g-1 at 0 °C, a high CO2/N2 selectivity (21) and 99% recyclability after up to five adsorption-desorption cycles.

Reductive Coupling of Nitroarenes and HCHO for General Synthesis of Functional Ethane-1,2-diamines by a Cobalt Single-Atom Catalyst

Despite the extensive applications, selective and diverse access to N,N'-diarylethane-1,2-diamines remains, to date, a challenge. Here, by developing a bifunctional cobalt single-atom catalyst (CoSA-N/NC), we present a general method for direct synthesis of such compounds via selective reductive coupling of cheap and abundant nitroarenes and formaldehyde, featuring good substrate and functionality compatibility, an easily accessible base metal catalyst with excellent reusability, and high step and atom efficiency. Mechanistic studies reveal that the N-anchored cobalt single atoms (CoN4) serve as the catalytically active sites for the reduction processes, the N-doped carbon support enriches the HCHO to timely trap the in situ formed hydroxyamines and affords the requisite nitrones under weak alkaline conditions, and the subsequent inverse electron demand 1,3-dipolar cycloaddition of the nitrones and imines followed by hydrodeoxygenation of the cycloadducts furnishes the products. In this work, the concept of catalyst-controlled nitroarene reduction to in situ create specific building blocks is anticipated to develop more useful chemical transformations.

Synthesis of Daidzein and Thiophene Containing Benzoxazine Resin and Its Thermoset and Carbon Material

In this work, a novel bio-based high-performance bisbenzoxazine resin was synthesized from daidzein, 2-thiophenemethylamine and paraformaldehyde. The chemical structure was confirmed using nuclear magnetic resonance spectroscopy (NMR) and Fourier-transform infrared spectroscopy (FT-IR). The polymerization process was systematically studied using differential scanning calorimetry (DSC) and in situ FT-IR spectra. It can be polymerized through multiple polymerization behaviors under the synergistic reaction of thiophene rings with benzopyrone rather than a single polymerization mechanism of traditional benzoxazines, as reported. In addition, thermogravimetric analysis (TGA) and a microscale combustion calorimeter (MCC) were used to study the thermal stability and flame retardancy of the resulting polybenzoxazine. The thermosetting material showed a high carbon residue rate of 62.8% and a low heat release capacity (HRC) value of 33 J/gK without adding any flame retardants. Based on its outstanding capability of carbon formation, this newly obtained benzoxazine resin was carbonized and activated to obtain a porous carbon material doped with both sulfur and nitrogen. The CO₂ absorption of the carbon material at 0 °C and 25 °C at 1 bar was 3.64 mmol/g and 3.26 mmol/g, respectively. The above excellent comprehensive properties prove its potential applications in many advanced fields.

CO2 Adsorption on N-Doped Porous Biocarbon Synthesized from Biomass Corncobs in Simulated Flue Gas

This study was to develop a low-cost N-doped porous biocarbon adsorbent that can directly adsorb CO₂ in high-temperature flue gas from fossil fuel combustion. The porous biocarbon was prepared by nitrogen doping and nitrogen-oxygen codoping through K₂CO₃ activation. Results showed that these samples exhibited a high specific surface area of 1209-2307 m²/g with a pore volume of 0.492-0.868 cm³/g and a nitrogen content of 0.41-3.3 wt %. The optimized sample CNNK-1 exhibited a high adsorption capacity of 1.30 and 0.27 mmol/g in the simulated flue gas (14.4 vol % CO₂ + 85.6 vol % N₂) and a high CO₂/N₂ selectivity of 80 and 20 at 25 and 100 °C and 1 bar, respectively. Studies revealed that too many microporous pores could hinder CO₂ diffusion and adsorption due to the decrease of CO₂ partial pressure and thermodynamic driving force in the simulated flue gas. The CO₂ adsorption of the samples was mainly chemical adsorption at 100 °C, which depended on the surface nitrogen functional groups. Nitrogen functional groups (pyridinic-N and primary and secondary amines) reacted chemically with CO₂ to produce graphitic-N, pyrrolic-like structures, and carboxyl functional groups (-N-COOH). Nitrogen and oxygen codoping increased the amount of nitrogen doping content in the sample, but acidic oxygen functional groups (carboxyl groups, lactones, and phenols) were introduced, which weakened the acid-base interactions between the sample and CO₂ molecules. It was demonstrated that SO₂ and water vapor had inhibition effects on CO₂ adsorption, while NO nearly has no effect on the complex flue gas. Cyclic regenerative adsorption showed that CNNK-1 possessed excellent regeneration and stabilization ability in complex flue gases, indicating that corncob-derived biocarbon had excellent CO₂ adsorption in high-temperature flue gas.

Microporous Borocarbonitrides BxCyNz: Synthesis, Characterization, and Promises for CO2 Capture

Porous borocarbonitrides (denoted BCN) were prepared through pyrolysis of the polymer stemmed from dehydrocoupled ethane 1,2-diamineborane (BH₃NH₂CH₂CH₂NH₂BH₃, EDAB) in the presence of F-127. These materials contain interconnected pores in the nanometer range with a high specific surface area up to 511 m² · g^-1. Gas adsorption of CO₂ demonstrated an interesting uptake (3.23 mmol · g^-1 at 0 °C), a high CO₂/N₂ selectivity as well as a significant recyclability after several adsorption-desorption cycles. For comparison's sake, a synthesized non-porous BCN as well as a commercial BN sample were studied to investigate the role of porosity and carbon doping factors in CO₂ capture. The present work thus tends to demonstrate that the two-step synthesis of microporous BCN adsorbent materials from EDAB using a bottom-up approach (dehydrocoupling followed by pyrolysis at 1100 °C) is relatively simple and interesting.

One-Pot Synthesis of Melamine Formaldehyde Resin-Derived N-Doped Porous Carbon for CO2 Capture Application

The design and synthesis of porous carbons for CO₂ adsorption have attracted tremendous interest owing to the ever-soaring concerns regarding climate change and global warming. Herein, for the first time, nitrogen-rich porous carbon was prepared with chemical activation (KOH) of commercial melamine formaldehyde resin (MF) in a single step. It has been shown that the porosity parameters of the as-prepared carbons were successfully tuned by controlling the activating temperature and adjusting the amount of KOH. Thus, as-prepared N-rich porous carbon shows a large surface area of 1658 m²/g and a high N content of 16.07 wt%. Benefiting from the unique physical and textural features, the optimal sample depicted a CO₂ uptake of up to 4.95 and 3.30 mmol/g at 0 and 25 °C under 1 bar of pressure. More importantly, as-prepared adsorbents show great CO₂ selectivity over N₂ and outstanding recyclability, which was prominently important for CO₂ capture from the flue gases in practical application. An in-depth analysis illustrated that the synergetic effect of textural properties and surface nitrogen decoration mainly determined the CO₂ capture performance. However, the textural properties of carbons play a more important role than surface functionalities in deciding CO₂ uptake. In view of cost-effective synthesis, outstanding textural activity, and the high adsorption capacity together with good selectivity, this advanced approach becomes valid and convenient in fabricating a unique highly efficient N-rich carbon adsorbent for CO₂ uptake and separation from flue gases.

Graphene Encapsulated Low-Load Nitrogen-Doped Bimetallic Magnetic Pd/Fe@N/C Catalyst for the Reductive Amination of Nitroarene Under Mild Conditions

Aniline is a group of important platform molecules that has been widely used in the synthesis of other high-value chemicals and pharmaceutical products. How to produce high-value anilines as the high-value chemical intermediates more efficiently and environmentally has always been a research topic in the industry. Catalytic hydrogenation is an environmentally friendly method for preparing halogenated anilines. Traditional noble metal catalysts face the problems of cost and noble metals residue. To improve the purity of the product as well as the activity and recyclability of the catalyst, we prepared a Pd/Fe magnetic bimetallic catalyst supported on N-doped carbon materials to reduce nitrobenzene to aniline under mild conditions. The catalyst has a low Pd loading of 2.35%. And the prepared bimetallic Pd/Fe@N/C catalyst showed excellent catalytic reactivity with the nitrobenzene conversion rate of 99%, and the aniline selectivity of 99% under mild reaction conditions of 0.8 MPa H2 and 40 °C. A variety of halogenated and aliphatic nitro compounds were well tolerated and had been transformed to the corresponding target amine products with excellent selectivity. In addition, the novel N-doped graphene-encapsulated bimetallic magnetic Pd/Fe@N/C catalyst not only had magnetic physical properties, which was easy to separate, recover, and used for the recycling of the catalyst without metal leaching but also catalyzed highly selective reductive amination of aromatics was a green, economical and environmentally friendly reaction with the only by-product of H2O.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s10562-023-04273-7.

Biomass-Based N-Rich Porous Carbon Materials for CO2 Capture and in-situ Conversion

Capturing CO₂ and subsequently converting into valuable chemicals has attracted extensive attention. Herein, a series of biomass-based N-rich porous carbon materials with high specific surface area and pore volume were prepared using biomass waste soybean dregs as precursors. The nitrogen content was up to 4 % with different forms in the carbon skeleton such as pyridine-N, pyrrole-N. The synergistic effect of ultra-micropore (pore size <0.7 nm) and N-containing groups endowed the materials with a high CO₂ adsorption capacity, reaching 6.3 and 3.6 mmol g^-1 at 0 and 25 °C under atmospheric pressure, respectively. In addition, the sufficient interaction between N-containing groups and CO₂ was demonstrated by solid-state nuclear magnetic resonance spectroscopy, and the captured CO₂ was possibly activated in the form of carbamate, which is conducive to subsequent conversion. Therefore, the supported catalyst with the as-synthetic porous carbon material as the carrier and Zn^II as catalytic sites was prepared and successfully applied for carboxylative cyclization of propargylic amine with CO₂ to afford the 3-benzyl-5-methyleneoxazolidin-2-one. The results showed that CO₂ capture and in-situ conversion work effectively to produce highly value-added chemicals. In this process, the captured CO₂ could be activated and fixed into chemicals in mild conditions. More importantly, the energy consumption in CO₂ desorption and adsorbent regeneration could be avoided. The valorization of both solid waste and CO₂ to valuable chemicals provides an elegant strategy of killing three birds with one stone.

Nanofibrous Cathode Catalysts with MoC Nanoparticles Embedded in N-Rich Carbon Shells for Low-Overpotential Li-CO2 Batteries

Li-CO₂ batteries with high theoretical energy densities are recognized as next-generation energy storage devices for addressing the range anxiety and environmental issues encountered in the field of electric transportation. However, cathode catalysts with unsatisfactory activity toward CO₂ absorption and reduction/evolution reactions hinder the development of Li-CO₂ batteries with desired specific capacities and sufficient cycle numbers. In this work, a multifunctional nanofibrous cathode catalyst that integrates N-rich carbon shells embedded with molybdenum carbide nanoparticles and multiwalled carbon nanotube cores was designed and prepared. The N-rich carbon shell could strengthen the absorption capacity of CO₂ and Li₂CO₃. The molybdenum carbide nanoparticles would improve the catalytic activity of both CO₂ reduction and evolution reactions. The carbon nanotube cores would provide an efficient network for electron transportation. The synergistic effect of the cathode catalysts enhances the electrochemical performance of Li-CO₂ batteries. A high cycling stability of more than 150 cycles at a current density of 250 mA g^-1 with a cutoff capacity of 1000 mAh g^-1 and a charge/discharge overpotential of less than 1.5 V is achieved. This work provides a feasible strategy for the design of a high-performance cathode catalyst for lithium-air batteries.

Renewable biochar derived from mixed sewage sludge and pine sawdust for carbon dioxide capture

Carbon dioxide (CO₂) is the main anthropogenic greenhouse gas contributing to global warming. In this study, a series of KOH-modified biochars derived from feedstock mixtures (i.e., S3W7 biomass consisting of 70% pine sawdust and 30% sewage sludge; S5W5 biomass consisting of 50% pine sawdust and 50% sewage sludge) at different temperature (i.e., 600-800 °C) were prepared for evaluating CO₂ adsorption performance. The KOH-activated biochars prepared with S3W7 biomass displayed larger surface areas and micropore volumes compared to those of S5W5 biochars. In particular, the highest CO₂ adsorption capacity (177.1 mg/g) was observed on S3W7 biomass at 700 °C (S3W7-700K), due to the largest surface area (2623 m²/g) and the highest micropore volume (0.68 cm³/g). Furthermore, surface functional groups, hydrophobicity, and aromaticity of biochar and presence of hetero atoms (N) also were actively involved in CO₂ adsorption of biochar. In addition, in situ DRIFTS analysis advanced current understanding for the chemical sorption mechanisms by identifying the transformation composites of CO₂ on biochars, and characterizing the weakly adsorbed and newly formed mineral species (e.g., carbonates) during the CO₂ sorption process. This study may provide an insight into the research of CO₂ capture by identifying physical and chemical adsorption, and expand the effective utilization of natural biomass-based biochar for mitigation greenhouse gas emission.

CO2 /N2 Separation on Highly Selective Carbon Nanofibers Investigated by Dynamic Gas Adsorption

The development of highly selective adsorbents for CO₂ is a key part to advance separation by adsorption as a viable technique for CO₂ capture. In this work, polyacrylonitrile (PAN) based carbon nanofibers (CNFs) were investigated for their CO₂ separation capabilities using dynamic gas adsorption. The CNFs were prepared by electrospinning and subsequent carbonization at various temperatures ranging from 600 to 1000 °C. A thorough investigation of the CO₂ /N₂ selectivity resulted in measured values of 53-106 at 1 bar and 25 °C on CNFs carbonized at 600, 700, or 800 °C. Moreover, the selectivity increased with lower measurement temperatures and lower CO₂ partial pressures, reaching values up to 194. Further analysis revealed high long-term stability with no degradation over 300 cycles and fast adsorption kinetics for CNFs carbonized at 600 or 700 °C. These excellent properties make PAN-based CNFs carbonized at 600 or 700 °C promising candidates for the capture of CO₂ .

Porous Adsorption Materials for Carbon Dioxide Capture in Industrial Flue Gas

Due to the intensification of the greenhouse effect and the emphasis on the utilization of CO₂ resources, the enrichment and separation of CO₂ have become a current research focus in the environment and energy. Compared with other technologies, pressure swing adsorption has the advantages of low cost and high efficiency and has been widely used. The design and preparation of high-efficiency adsorbents is the core of the pressure swing adsorption technology. Therefore, high-performance porous CO₂ adsorption materials have attracted increasing attention. Porous adsorption materials with high specific surface area, high CO₂ adsorption capacity, low regeneration energy, good cycle performance, and moisture resistance have been focused on. This article summarizes the optimization of CO₂ adsorption by porous adsorption materials and then applies them to the field of CO₂ adsorption. The internal laws between the pore structure, surface chemistry, and CO₂ adsorption performance of porous adsorbent materials are discussed. Further development requirements and research focus on porous adsorbent materials for CO₂ treatment in industrial waste gas are prospected. The structural design of porous carbon adsorption materials is still the current research focus. With the requirements of applications and environmental conditions, the integrity, mechanical strength and water resistance of high-performance materials need to be met.

Nitrogen Atom-Doped Layered Graphene for High-Performance CO2/N2 Adsorption and Separation

The development of high-performance CO2 capture and separation adsorbents is critical to alleviate the deteriorating environmental issues. Herein, N atom-doped layered graphene (N-MGN) was introduced to form triazine and pyridine as potential CO2 capture and separation adsorbents via regulation of interlayer spacings. Structural analyses showed that accessible surface area of the N-MGN is 2521.72 m2 g−1, the porosity increased from 9.43% to 84.86%. At ultra-low pressure, N-MGN_6.8 have exhibited a high CO2 adsorption capacity of 10.59 mmol/g at 298 K and 0.4 bar. At high pressure, the absolute adsorption capacities of CO2 in N-MGN_17.0 (40.16 mmol g−1) at 7.0 MPa and 298 K are much larger than that of N-doping slit pore. At 298 K and 1.0 bar, the highest selectivity of CO2 over N2 reached up to ~133 in N-MGN_6.8. The research shows that N doping can effectively improve the adsorption and separation capacity of CO2 and N2 in layered graphene, and the interlayer spacing has an important influence on the adsorption capacity of CO2/N2. The adsorption heat and relative concentration curves further confirmed that the layered graphene with an interlayer spacing of 6.8 Å has the best adsorption and separation ability of CO2 and N2 under low pressure. Under high pressure, the layered graphene with the interlayer spacing of 17.0 Å has the best adsorption and separation ability of CO2 and N2.

Complete photocatalytic degradation of tetracycline by carbon doped TiO2 supported with stable metal nitrate hydroxide

Visible light-driven carbon-doped TiO₂ supported with metal nitrate hydroxide (CT-Ni/Co/Cu) nanocomposites were prepared and characterized by various studies. It is fascinating to note that particle size of TiO₂ was substantially reduced from 5 μm to 50 nm after doping of carbon which was confirmed by FESEM. Moreover, the incorporation of stable metal (Cu) nitrate hydroxide further enhanced the visible light absorption up to 800 nm as evident by UV-DRS. The carbon doping and copper nitrate formation are validated by the Ti-O-C and N-O bonds using XPS and FTIR spectra. The photocatalytic activity of as-prepared photocatalyst was tested for the tetracycline degradation (TC, 10 mg/mL) under light irradiation. Significantly, 3 wt% carbon-doped TiO₂ (31CT) with Cu (II) hydroxide nitrate nanocomposite photocatalyst exhibited an excellent photocatalytic activity (97%, within 1 h), and the corresponding reaction rate was around 2 times higher than bare TiO₂. The excellent photocatalytic activity of 31CT-Cu nanocomposite was due to enhanced adsorbent of TC via carbon doping, visible light absorption, improved photo-generated carrier separation and migration by metal nitrate hydroxide as a support. This work may promote the development of a new carbon-doped TiO₂ supported with highly stable metal nitrate hydroxide nanocomposite by facile method and used as an efficient photocatalyst for photodegradation of environmental pollutants.

Preparation of Zeolitic Imidazolate Framework-8-Based Nanofiber Composites for Carbon Dioxide Adsorption

In this study, polyacrylonitrile (PAN)-based activated nanofiber composites, which were embedded inside zeolitic imidazolate framework-8 (ZIF-8) crystals or ZIF-8-derived carbons (ZDC-850), were fabricated using an electrospinning process, to serve as CO2 adsorbents. The adsorbents were characterized using various techniques. The degree of crystallinity of ZDC-850 totally changed compared to that of ZIF-8. For nanofiber composites, the timing of the ligand decomposition of ZIF-8 significantly affected the material properties. The Zn metals in the ZIF-8/PAN or ZDC-850/PAN could be embedded and protected by the PAN fibers from excess volatilization in the following treatments: ZIF-8 had significant pore volumes in the range of 0.9−1.3 nm, but ZDC-850 and ZIF-8/PAN exhibited a distinct peak at approximately 0.5 nm. The CO2 adsorption capacities at 25 °C and 1 atm followed the order: ZIF-8/PAN (4.20 mmol/g) > ZDC-850 (3.50 mmol/g) > ZDC-850/PAN (3.38 mmol/g) > PAN (2.91 mmol/g) > ZIF-8 (0.88 mmol/g). The slope in the log−linear plot of isosteric heat of adsorption was highly associated with CO2 adsorption performance. Under 1 atm at 25 °C, for Zn metal active sites inside the pores, the pores at approximately 0.5 nm and in C-N (amines) groups could promote CO2 adsorption. At low CO2 pressures, for a good CO2 adsorbent, the carbon content in the adsorbent should be higher than a threshold value. Under this condition, the percentage of ultra-micropore and micropore volumes, as well as the functional groups, such as the quaternary or protonated N (amines), N=C (imines or pyridine-type N), C-OH, and -COOH groups, should be considered as significant factors for CO2 adsorption.

Carbon Dioxide Capture through Physical and Chemical Adsorption Using Porous Carbon Materials: A Review

Due to rapid industrialization and urban development across the globe, the emission of carbon dioxide (CO2) has been significantly increased, resulting in adverse effects on the climate and ecosystems. In this regard, carbon capture and storage (CCS) is considered to be a promising technology in reducing atmospheric CO2 concentration. Among the CO2 capture technologies, adsorption has grabbed significant attention owing to its advantageous characteristics discovered in recent years. Porous carbon-based materials have emerged as one of the most versatile CO2 adsorbents. Numerous research activities have been conducted by synthesizing carbon-based adsorbents using different precursors to investigate their performances towards CCS. Additionally, amine-functionalized carbon-based adsorbents have exhibited remarkable potential for selective capturing of CO2 in the presence of other gases and humidity conditions. The present review describes the CO2 emission sources, health, and environmental impacts of CO2 towards the human beings, options for CCS, and different CO2 separation technologies. Apart from the above, different synthesis routes of carbon-based adsorbents using various precursors have been elucidated. The CO2 adsorption selectivity, capacity, and reusability of the current and applied carbon materials have also been summarized. Furthermore, the critical factors controlling the adsorption performance (e.g., the effect of textural and functional properties) are comprehensively discussed. Finally, the current challenges and future research directions have also been summarized.

Rational synthesis of microporous carbons for enhanced post-combustion CO2 capture via non-hydroxide activation of air carbonised biomass

This work explores the use of a less corrosive activating agent, potassium oxalate (PO), in combination with difficult to activate carbonaceous matter for the preparation of activated carbons. The design of the study allowed a fuller understanding of the workings of PO compared to hydroxide (KOH) activation, and also optimised the preparation of highly microporous carbons with exceptional CO₂ storage capacity under low pressure (≤1 bar) conditions at ambient temperature. The PO activated carbons have a surface area of up to 1760 m² g⁻¹ and are highly microporous with virtually all of the surface area arising from micropores. The porosity of the PO activated carbons can be readily tailored towards having pores of size 6–8 Å, which are highly suited for CO₂ storage at low pressure (i.e., post-combustion capture). At 25 °C, the PO activated carbons can store up to 1.8 and 5.0 mmol g⁻¹ of CO₂ at 0.15 bar and 1 bar, respectively. On the other hand, KOH activated carbons reach a higher surface area of up to 2700 m² g⁻¹, and store up to 1.0 and 4.0 mmol g⁻¹ of CO₂. This work demonstrates that PO may be used as a mild, less corrosive and less toxic activating agent for the rational and targeted synthesis of biomass-derived activated carbons with tailored porosity. The targeted synthesis may be aided by careful selection of the biomass starting material as guided by the O/C ratio of the biomass.

Rational combination of a mild activating agent (potassium oxalate) and air carbonised biomass, which is resistant to activation, yields highly microporous carbons with enhanced post-combustion CO₂ uptake.

Theoretical Investigation of Carbon Dioxide Adsorption on Li+-Decorated Nanoflakes

Recently, the capture of carbon dioxide, the primary greenhouse gas, has attracted particular interest from researchers worldwide. In the present work, several theoretical methods have been used to study adsorption of CO2 molecules on Li+-decorated coronene (Li+@coronene). It has been established that Li+ can be strongly anchored on coronene, and then a physical adsorption of CO2 will occur in the vicinity of this cation. Moreover, such a decoration has substantially improved interaction energy (Eint) between CO2 molecules and the adsorbent. One to twelve CO2 molecules per one Li+ have been considered, and their Eint values are in the range from -5.55 to -16.87 kcal/mol. Symmetry-adapted perturbation theory (SAPT0) calculations have shown that, depending on the quantity of adsorbed CO2 molecules, different energy components act as the main reason for attraction. AIMD simulations allow estimating gravimetric densities (GD, wt.%) at various temperatures, and the maximal GDs have been calculated to be 9.3, 6.0, and 4.9% at T = 77, 300, and 400 K, respectively. Besides this, AIMD calculations validate stability of Li+@coronene complexes during simulation time at the maximum CO2 loading. Bader's atoms-in-molecules (QTAIM) and independent gradient model (IGM) techniques have been implemented to unveil the features of interactions between CO2 and Li+@coronene. These methods have proved that there exists a non-covalent bonding between the cation center and CO2. We suppose that findings, derived in this theoretical work, may also benefit the design of novel nanosystems for gas storage and delivery.

N, O-codoped hierarchical porous graphitic carbon for electrochemical immunosensing of Lactobacillus rhamnosus GG

An ultrasensitive label-free electrochemical immunosensor was fabricated for quantitative detection of Lactobacillus rhamnosus GG (LGG). The N/O co-doped three-dimensional hierarchical porous graphitic (THPG) carbon was synthesized by a one-step synthesis of polyaniline hydrogel, and followed by simple carbonization and chemical activation procedures. Because of the unique structure design, the obtained THPG carbon networks possess an ultra-large specific surface area of 4859 m² g^-1 along with a class of highly graphitic carbons. The results offer an enormous surface area and excellent electrical conductivity for label-free electrochemical immunosensing of probiotic L. rhamnosus strain. Under optimal conditions, the immunosensor showed a good linear relationship between peak current and concentration of LGG (R² = 0.9976), with a detection limit of 2 CFU mL^-1. Furthermore, this label-free immunosensor also shows good specificity, long-term stability, and reliability, and could be applied to detect probiotic LGG in dairy products and drinks with satisfactory results. The present protocol was shown to be quite promising for practical screening and functional evaluation of probiotic products containing LGG. A ultrasensitive label-free electrochemical immunosensor based on THPG carbon was fabricated for detection of Lactobacillus rhamnosus GG.

Rearranged Copolyurea Networks for Selective Carbon Dioxide Adsorption at Room Temperature

Copolyurea networks (co-UNs) were synthesized via crosslinking polymerization of a mixture of tetrakis(4-aminophenyl)methane (TAPM) and melamine with hexamethylene diisocyanate (HDI) using the organic sol-gel polymerization method. The subsequent thermal treatment of between 200 and 400 °C induced the sintering of the powdery polyurea networks to form porous frameworks via urea bond rearrangement and the removal of volatile hexamethylene moieties. Incorporating melamine into the networks resulted in a higher nitrogen content and micropore ratio, whereas the overall porosity decreased with the melamine composition. The rearranged network composed of the tetraamine/melamine units in an 80:20 ratio showed the highest carbon dioxide adsorption quantity at room temperature. The results show that optimizing the chemical structure and porosity of polyurea-based networks can lead to carbon dioxide adsorbents working at elevated temperatures.

A Solvent-Polarity-Induced Interface Self-Assembly Strategy towards Mesoporous Triazine-Based Carbon Materials

Triazine-based materials with porous structure have recently received numerous attentions as a fascinating new class because of their superior potential for various applications. However, it is still a formidable challenge to obtain triazine-based materials with precise adjustable meso-scaled pore sizes and controllable pore structures by reported synthesis approaches. Herein, we develop a solvent polarity induced interface self-assembly strategy to construct mesoporous triazine-based carbon materials. In this method, we employ a mixed solvent system within a suitable range of polarity (0.223≤Lippert-Mataga parameter (Δf) ≤0.295) to induce valid self-assembly of skeleton precursor and surfactant. The as-prepared mesoporous triazine-based carbon materials possess uniform tunable pore sizes (8.2-14.0 nm), high surface areas and ultrahigh nitrogen content (up to 18 %). Owing to these intriguing advantages, the fabricated mesoporous triazine-based carbon materials as functionalized porous solid absorbents exhibit predominant CO₂ adsorption performance and exceptional selectivity for the capture of CO₂ over N₂ .

APTES-Based Silica Nanoparticles as a Potential Modifier for the Selective Sequestration of CO2 Gas Molecules

In this work, we have described the characterization of hybrid silica nanoparticles of 50 nm size, showing outstanding size homogeneity, a large surface area, and remarkable CO2 sorption/desorption capabilities. A wide battery of techniques was conducted ranging from spectroscopies such as: UV-Vis and IR, to microscopies (SEM, AFM) and CO2 sorption/desorption isotherms, thus with the purpose of the full characterization of the material. The bare SiO2 (50 nm) nanoparticles modified with 3-aminopropyl (triethoxysilane), APTES@SiO2 (50 nm), show a remarkable CO2 sequestration enhancement compared to the pristine material (0.57 vs. 0.80 mmol/g respectively at 50 °C). Furthermore, when comparing them to their 200 nm size counterparts (SiO2 (200 nm) and APTES@SiO2 (200 nm)), there is a marked CO2 capture increment as a consequence of their significantly larger micropore volume (0.25 cm3/g). Additionally, ideal absorbed solution theory (IAST) was conducted to determine the CO2/N2 selectivity at 25 and 50 °C of the four materials of study, which turned out to be >70, being in the range of performance of the most efficient microporous materials reported to date, even surpassing those based on silica.