Singlet versus Triplet Reactivity in an Mn(V)-Oxo Species: Testing Theoretical Predictions Against Experimental Evidence

Redox Processes Involving Oxygen: The Surprising Influence of Redox-Inactive Lewis Acids

Metalloenzymes with heteromultimetallic active sites perform chemical reactions that control several biogeochemical cycles. Transformations catalyzed by such enzymes include dioxygen generation and reduction, dinitrogen reduction, and carbon dioxide reduction-instrumental transformations for progress in the context of artificial photosynthesis and sustainable fertilizer production. While the roles of the respective metals are of interest in all these enzymatic transformations, they share a common factor in the transfer of one or multiple redox equivalents. In light of this feature, it is surprising to find that incorporation of redox-inactive metals into the active site of such an enzyme is critical to its function. To illustrate, the presence of a redox-inactive Ca2+ center is crucial in the Oxygen Evolving Complex, and yet particularly intriguing given that the transformation catalyzed by this cluster is a redox process involving four electrons. Therefore, the effects of redox inactive metals on redox processes-electron transfer, oxygen- and hydrogen-atom transfer, and O-O bond cleavage and formation reactions-mediated by transition metals have been studied extensively. Significant effects of redox inactive metals have been observed on these redox transformations; linear free energy correlations between Lewis acidity and the redox properties of synthetic model complexes are observed for several reactions. In this Perspective, these effects and their relevance to multielectron processes will be discussed.

Direct spectroscopic evidence for the high-spin state of dioxidomanganese(V)

The spin state of metal centers in many catalytic reactions has been demonstrated to be a rate limiting factor when high-valent metal centers such as manganese are involved. Although numerous manganese(V) complexes, including a few manganese(V) oxo complexes, have been identified, thus far only one of these, [MnVH3 buea(O)], has been directly confirmed to exist in a high spin state. Such a high-spin manganese(V) center may play a crucial role in the dioxygen formation process in the elusive S4 state of the Kok cycle in photosystem II. In this study, we provide direct experimental evidence, using X-ray magnetic circular dichroism (XMCD) and X-ray absorption spectroscopy (XAS), of gas phase [OMnO]+ as the second known high-spin manganese(V) oxo complex. We conclusively assign the ground state as 3B1 (C2v). Additionally, we provide fingerprint spectra not only for [OMnV O]+, but also for the high-spin hydroxidooxidomanganese(IV) ion [OMnIV OH]+ in its 4A'' (Cs) ground state that is expected to exhibit similar XAS and XMCD spectral signatures to neutral dioxidomanganese(IV).

Untangling ancillary ligand donation versus locus of oxidation effects on metal nitride reactivity

We detail the relative role of ancillary ligand electron-donating ability in comparison to the locus of oxidation (either metal or ligand) on the electrophilic reactivity of a series of oxidized Mn salen nitride complexes. The electron-donating ability of the ancillary salen ligand was tuned via the para-phenolate substituent (R = CF3, H, tBu, OiPr, NMe2, NEt2) in order to have minimal effect on the geometry at the metal center. Through a suite of experimental (electrochemistry, electron paramagnetic resonance spectroscopy, UV-vis-NIR spectroscopy) and theoretical (density functional theory) techniques, we have demonstrated that metal-based oxidation to [MnVI(SalR)N]+ occurs for R = CF3, H, tBu, OiPr, while ligand radical formation to [MnV(SalR)N]+˙ occurs with the more electron-donating substituents R = NMe2, NEt2. We next investigated the reactivity of the electrophilic nitride with triarylphosphines to form a MnIV phosphoraneiminato adduct and determined that the rate of reaction decreases as the electron-donating ability of the salen para-phenolate substituent is increased. Using a Hammett plot, we find a break in the Hammett relation between R = OiPr and R = NMe2, without a change in mechanism, consistent with the locus of oxidation exhibiting a dominant effect on nitride reactivity, and not the overall donating ability of the ancillary salen ligand. This work differentiates between the subtle and interconnected effects of ancillary ligand electron-donating ability, and locus of oxidation, on electrophilic nitride reactivity.

Unravelling the Effect of Acid-Driven Electron Transfer in High-Valent FeIV =O/MnIV =O Species and Its Implications for Reactivity

The electron transfer (ET) step is one of the crucial processes in biochemical redox reactions that occur in nature and has been established as a key step in dictating the reactivity of high-valent metal-oxo species. Although metalloenzymes possessing metal-oxo units at their active site are typically associated with outer-sphere electron transfer (OSET) processes, biomimetic models, in contrast, have been found to manifest either an inner-sphere electron transfer (ISET) or OSET mechanism. This distinction is clearly illustrated through the behaviour of [(N4Py)MnIV (O)]2+ (1) and [(N4Py)FeIV (O)]2+ (2) complexes, where complex 1 showcases an OSET mechanism, while complex 2 exhibits an ISET mechanism, especially evident in their reactions involving C-H bond activation and oxygen atom transfer reactions in the presence of a Lewis/Bronsted acid. However, the precise reason for this puzzling difference remains elusive. This work unveils the origin of the perplexing inner-sphere vs outer-sphere electron transfer process (ISET vs OSET) in [(N4Py)MnIV (O)]2+ (1) and [(N4Py)FeIV (O)]2+ (2) species in the presence of Bronsted acid. The calculations indicate that when the substrate (toluene) approaches both 1 and 2 that is hydrogen bonded with two HOTf molecules (denoted as 1-HOTf and 2-HOTf, respectively), proton transfer from one of the HOTf molecules to the metal-oxo unit is triggered and a simultaneous electron transfer occurs from toluene to the metal centre. Interestingly, the preference for OSET by 1-HOTf is found to originate from the choice of MnIV =O centre to abstract spin-down (β) electron from toluene to its δ(dxy ) orbital. On the other hand, in 2-HOTf, a spin state inversion from triplet to quintet state takes place during the proton (from HOTf) coupled electron transfer (from toluene) preferring a spin-up (α) electron abstraction to its σ* (dz 2 ) orbital mediated by HOTf giving rise to ISET. In addition, 2-HOTf was calculated to possess a larger reorganisation energy, which facilitates the ISET process via the acid. The absence of spin-inversion and smaller reorganisation energy switch the mechanism to OSET for 1-HOTf. Therefore, for the first time, the significance of spin-state and spin-inversion in the electron transfer process has been identified and demonstrated within the realm of high-valent metal-oxo chemistry. This discovery holds implications for the potential involvement of high-valent Mn-oxo species in performing similar transformative processes within Photosystem II.

How Is Substrate Halogenation Triggered by the Vanadium Haloperoxidase from Curvularia inaequalis?

Vanadium haloperoxidases (VHPOs) are unique enzymes in biology that catalyze a challenging halogen transfer reaction and convert a strong aromatic C-H bond into C-X (X = Cl, Br, I) with the use of a vanadium cofactor and H₂O₂. The VHPO catalytic cycle starts with the conversion of hydrogen peroxide and halide (X = Cl, Br, I) into hypohalide on the vanadate cofactor, and the hypohalide subsequently reacts with a substrate. However, it is unclear whether the hypohalide is released from the enzyme or otherwise trapped within the enzyme structure for the halogenation of organic substrates. A substrate-binding pocket has never been identified for the VHPO enzyme, which questions the role of the protein in the overall reaction mechanism. Probing its role in the halogenation of small molecules will enable further engineering of the enzyme and expand its substrate scope and selectivity further for use in biotechnological applications as an environmentally benign alternative to current organic chemistry synthesis. Using a combined experimental and computational approach, we elucidate the role of the vanadium haloperoxidase protein in substrate halogenation. Activity studies show that binding of the substrate to the enzyme is essential for the reaction of the hypohalide with substrate. Stopped-flow measurements demonstrate that the rate-determining step is not dependent on substrate binding but partially on hypohalide formation. Using a combination of molecular mechanics (MM) and molecular dynamics (MD) simulations, the substrate binding area in the protein is identified and even though the selected substrates (methylphenylindole and 2-phenylindole) have limited hydrogen-bonding abilities, they are found to bind relatively strongly and remain stable in a binding tunnel. A subsequent analysis of the MD snapshots characterizes two small tunnels leading from the vanadate active site to the surface that could fit small molecules such as hypohalide, halide, and hydrogen peroxide. Density functional theory studies using electric field effects show that a polarized environment in a specific direction can substantially lower barriers for halogen transfer. A further analysis of the protein structure indeed shows a large dipole orientation in the substrate-binding pocket that could enable halogen transfer through an applied local electric field. These findings highlight the importance of the enzyme in catalyzing substrate halogenation by providing an optimal environment to lower the energy barrier for this challenging aromatic halide insertion reaction.

Brønsted Acids Promote Olefin Oxidations by Bioinspired Nonheme CoIII(PhIO)(OH) Complexes: A Role for Low-Barrier Hydrogen Bonds

Introduction of Brønsted acids into biomimetic nonheme reactions promotes the oxidative ability of metal-oxygen complexes significantly. However, the molecular machinery of the promoted effects is missing. Herein, a comprehensive investigation of styrene oxidation by a cobalt(III)-iodosylbenzene complex, [(TQA)Co^III(OIPh)(OH)]²⁺ (1, TQA = tris(2-quinolylmethyl)amine), in the presence and absence of triflic acid (HOTf) was performed using density functional theory calculations. Results revealed for the first time that there is a low-barrier hydrogen bond (LBHB) between HOTf and the hydroxyl ligand of 1, which forms two valence-resonance structures [(TQA)Co^III(OIPh)(HO^---HOTf)]²⁺ (1_LBHB) and [(TQA)Co^III(OIPh)(H₂O--OTf^-)]²⁺ (1'_LBHB). Due to the oxo-wall, these complexes (1_LBHB and 1'_LBHB) cannot convert to high-valent cobalt-oxyl species. Instead, styrene oxidation by these oxidants (1_LBHB and 1'_LBHB) shows novel spin-state selectivity, i.e., on the ground closed-shell singlet state, styrene is oxidized to an epoxide, whereas on the excited triplet and quintet states, an aldehyde product, phenylacetaldehyde, is formed. The preferred pathway is styrene oxidation by 1'_LBHB, which is initiated by a rate-limiting bond-formation-coupled electron transfer process with an energy barrier of 12.2 kcal mol^-1. The nascent PhIO-styrene-radical-cation intermediate undergoes an intramolecular rearrangement to produce an aldehyde. The halogen bond between the OH^-/H₂O ligand and the iodine of PhIO modulates the activity of the cobalt-iodosylarene complexes 1_LBHB and 1'_LBHB. These new mechanistic findings enrich our knowledge of nonheme chemistry and hypervalent iodine chemistry and will play a positive role in the rational design of new catalysts.

Chromium Nitride Umpolung Tuned by the Locus of Oxidation

Oxidation of a series of Cr^V nitride salen complexes (Cr^VNSal^R) with different para-phenolate substituents (R = CF₃, tBu, NMe₂) was investigated to determine how the locus of oxidation (either metal or ligand) dictates reactivity at the nitride. Para-phenolate substituents were chosen to provide maximum variation in the electron-donating ability of the tetradentate ligand at a site remote from the metal coordination sphere. We show that one-electron oxidation affords Cr^VI nitrides ([Cr^VINSal^R]⁺; R = CF₃, tBu) and a localized Cr^V nitride phenoxyl radical for the more electron-donating NMe₂ substituent ([Cr^VNSal^NMe2]^•+). The facile nitride homocoupling observed for the Mn^VI analogues was significantly attenuated for the Cr^VI complexes due to a smaller increase in nitride character in the M≡N π* orbitals for Cr relative to Mn. Upon oxidation, both the calculated nitride natural population analysis (NPA) charge and energy of molecular orbitals associated with the {Cr≡N} unit change to a lesser extent for the Cr^V ligand radical derivative ([Cr^VNSal^NMe2]^•+) in comparison to the Cr^VI derivatives ([Cr^VINSal^R]⁺; R = CF₃, tBu). As a result, [Cr^VNSal^NMe2]^•+ reacts with B(C₆F₅)₃, thus exhibiting similar nucleophilic reactivity to the neutral Cr^V nitride derivatives. In contrast, the Cr^VI derivatives ([Cr^VINSal^R]⁺; R = CF₃, tBu) act as electrophiles, displaying facile reactivity with PPh₃ and no reaction with B(C₆F₅)₃. Thus, while oxidation to the ligand radical does not change the reactivity profile, metal-based oxidation to Cr^VI results in umpolung, a switch from nucleophilic to electrophilic reactivity at the terminal nitride.

What Drives Radical Halogenation versus Hydroxylation in Mononuclear Nonheme Iron Complexes? A Combined Experimental and Computational Study

Nonheme iron halogenases are unique enzymes in nature that selectively activate an aliphatic C–H bond of a substrate to convert it into C–X (X = Cl/Br, but not F/I). It is proposed that they generate an Fe^III(OH)(X) intermediate in their catalytic cycle. The analogous Fe^III(OH) intermediate in nonheme iron hydroxylases transfers OH^• to give alcohol product, whereas the halogenases transfer X^• to the carbon radical substrate. There remains significant debate regarding what factors control their remarkable selectivity of the halogenases. The reactivity of the complexes Fe^III(BNPA^Ph2O)(OH)(X) (X = Cl, Br) with a secondary carbon radical (R^•) is described. It is found that X^• transfer occurs with a secondary carbon radical, as opposed to OH^• transfer with tertiary radicals. Comprehensive computational studies involving density functional theory were carried out to examine the possible origins of this selectivity. The calculations reproduce the experimental findings, which indicate that halogen transfer is not observed for the tertiary radicals because of a nonproductive equilibrium that results from the endergonic nature of these reactions, despite a potentially lower reaction barrier for the halogenation pathway. In contrast, halogen transfer is favored for secondary carbon radicals, for which the halogenated product complex is thermodynamically more stable than the reactant complex. These results are rationalized by considering the relative strengths of the C–X bonds that are formed for tertiary versus secondary carbon centers. The computational analysis also shows that the reaction barrier for halogen transfer is significantly dependent on secondary coordination sphere effects, including steric and H-bonding interactions.

Second coordination sphere effects on the mechanistic pathways for dioxygen activation by a ferritin: involvement of a Tyr radical and the identification of a cation binding site

Ferritins are ubiquitous diiron enzymes involved in iron(II) detoxification and oxidative stress responses and can act as metabolic iron stores. The overall reaction mechanisms of ferritin enzymes are still unclear, particularly concerning the role of the conserved, near catalytic center Tyr residue. Thus, we carried out a computational study of a ferritin using a large cluster model of well over 300 atoms including its first- and second-coordination sphere. The calculations reveal important insight into the structure and reactivity of ferritins. Specifically, the active site Tyr residue delivers a proton and electron in the catalytic cycle prior to iron(II) oxidation. In addition, the calculations highlight a likely cation binding site at Asp65, which through long-range electrostatic interactions, influences the electronic configuration and charge distributions of the metal center. The results are consistent with experimental observations but reveal novel detail of early mechanistic steps that lead to an unusual mixed-valent iron(III)-iron(II) center.

Benchmark Study of Redox Potential Calculations for Iron-Sulfur Clusters in Proteins

Redox potentials have been calculated for 12 different iron–sulfur sites of 6 different types with 1–4 iron ions. Structures were optimized with combined quantum mechanical and molecular mechanical (QM/MM) methods, and the redox potentials were calculated using the QM/MM energies, single-point QM methods in a continuum solvent or by QM/MM thermodynamic cycle perturbations. We show that the best results are obtained with a large QM system (∼300 atoms, but a smaller QM system, ∼150 atoms, can be used for the QM/MM geometry optimization) and a large value of the dielectric constant (80). For absolute redox potentials, the B3LYP density functional method gives better results than TPSS, and the results are improved with a larger basis set. However, for relative redox potentials, the opposite is true. The results are insensitive to the force field (charges of the surroundings) used for the QM/MM calculations or whether the protein and solvent outside the QM system are relaxed or kept fixed at the crystal structure. With the best approach for relative potentials, mean absolute and maximum deviations of 0.17 and 0.44 V, respectively, are obtained after removing a systematic error of −0.55 V. Such an approach can be used to identify the correct oxidation states involved in a certain redox reaction.

We have studied redox potentials of 12 iron−sulfur sites of 6 types with 1−4 iron ions. Structures were optimized with combined quantum mechanical and molecular mechanical (QM/MM) methods, and the redox potentials were calculated with QM/MM, QM calculations in a continuum solvent or by QM/MM thermodynamic cycle perturbations. The best results are obtained with the second approach using ∼300 atoms in the QM model and a large dielectric constant.

Can the isonitrile biosynthesis enzyme ScoE assist with the biosynthesis of isonitrile groups in drug molecules? A computational study

Computational studies show that the isonitrile synthesizing enzyme ScoE can catalyse the conversion of γ-Gly substituents in substrates to isonitrile. This enables efficient isonitrile substitution into target molecules such as axisonitrile-1.

pH Changes That Induce an Axial Ligand Effect on Nonheme Iron(IV) Oxo Complexes with an Appended Aminopropyl Functionality

Nonheme iron enzymes often utilize a high-valent iron(IV) oxo species for the biosynthesis of natural products, but their high reactivity often precludes structural and functional studies of these complexes. In this work, a combined experimental and computational study is presented on a biomimetic nonheme iron(IV) oxo complex bearing an aminopyridine macrocyclic ligand and its reactivity toward olefin epoxidation upon changes in the identity and coordination ability of the axial ligand. Herein, we show a dramatic effect of the pH on the oxygen-atom-transfer (OAT) reaction with substrates. In particular, these changes have occurred because of protonation of the axial-bound pendant amine group, where its coordination to iron is replaced by a solvent molecule or anionic ligand. This axial ligand effect influences the catalysis, and we observe enhanced cyclooctene epoxidation yields and turnover numbers in the presence of the unbound protonated pendant amine group. Density functional theory studies were performed to support the experiments and highlight that replacement of the pendant amine with a neutral or anionic ligand dramatically lowers the rate-determining barriers of cyclooctene epoxidation. The computational work further establishes that the change in OAT is due to electrostatic interactions of the pendant amine cation that favorably affect the barrier heights.

Product Distributions of Cytochrome P450 OleTJE with Phenyl-Substituted Fatty Acids: A Computational Study

There are two types of cytochrome P450 enzymes in nature, namely, the monooxygenases and the peroxygenases. Both enzyme classes participate in substrate biodegradation or biosynthesis reactions in nature, but the P450 monooxygenases use dioxygen, while the peroxygenases take H₂O₂ in their catalytic cycle instead. By contrast to the P450 monooxygenases, the P450 peroxygenases do not require an external redox partner to deliver electrons during the catalytic cycle, and also no external proton source is needed. Therefore, they are fully self-sufficient, which affords them opportunities in biotechnological applications. One specific P450 peroxygenase, namely, P450 OleT_JE, reacts with long-chain linear fatty acids through oxidative decarboxylation to form hydrocarbons and, as such, has been implicated as a suitable source for the biosynthesis of biofuels. Unfortunately, the reactions were shown to produce a considerable amount of side products originating from C^α and C^β hydroxylation and desaturation. These product distributions were found to be strongly dependent on whether the substrate had substituents on the C^α and/or C^β atoms. To understand the bifurcation pathways of substrate activation by P450 OleT_JE leading to decarboxylation, C^α hydroxylation, C^β hydroxylation and C^α–C^β desaturation, we performed a computational study using 3-phenylpropionate and 2-phenylbutyrate as substrates. We set up large cluster models containing the heme, the substrate and the key features of the substrate binding pocket and calculated (using density functional theory) the pathways leading to the four possible products. This work predicts that the two substrates will react with different reaction rates due to accessibility differences of the substrates to the active oxidant, and, as a consequence, these two substrates will also generate different products. This work explains how the substrate binding pocket of P450 OleT_JE guides a reaction to a chemoselectivity.

Electrostatic Perturbations from the Protein Affect C-H Bond Strengths of the Substrate and Enable Negative Catalysis in the TmpA Biosynthesis Enzyme

The nonheme iron dioxygenase 2-(trimethylammonio)-ethylphosphonate dioxygenase (TmpA) is an enzyme involved in the regio- and chemoselective hydroxylation at the C¹ -position of the substrate as part of the biosynthesis of glycine betaine in bacteria and carnitine in humans. To understand how the enzyme avoids breaking the weak C² -H bond in favor of C¹ -hydroxylation, we set up a cluster model of 242 atoms representing the first and second coordination sphere of the metal center and substrate binding pocket, and investigated possible reaction mechanisms of substrate activation by an iron(IV)-oxo species by density functional theory methods. In agreement with experimental product distributions, the calculations predict a favorable C¹ -hydroxylation pathway. The calculations show that the selectivity is guided through electrostatic perturbations inside the protein from charged residues, external electric fields and electric dipole moments. In particular, charged residues influence and perturb the homolytic bond strength of the C¹ -H and C² -H bonds of the substrate, and strongly strengthens the C² -H bond in the substrate-bound orientation.

Mechanistic insights into dioxygen activation by a manganese corrole complex: a broken-symmetry DFT study

The Mn–oxygen species have been implicated as key intermediates in various Mn-mediated oxidation reactions. However, artificial oxidants were often used for the synthesis of the Mn–oxygen intermediates. Remarkably, the Mn(v)–oxo and Mn(iv)–peroxo species have been observed in the activation of O₂ by Mn(iii) corroles in the presence of base (OH⁻) and hydrogen donors. In this work, density functional theory methods were used to get insight into the mechanism of dioxygen activation and formation of Mn(v)–oxo. The results demonstrated that the dioxygen cannot bind to Mn without the axial OH⁻ ligand. Upon the addition of the axial OH⁻ ligand, the dioxygen can bind to Mn in an end-on fashion to give the Mn(iv)–superoxo species. The hydrogen atom transfer from the hydrogen donor (substrate) to the Mn(iv)–superoxo species is the rate-limiting step, having a high reaction barrier and a large endothermicity. Subsequently, the O–C bond formation is concerted with an electron transfer from the substrate radical to the Mn and a proton transfer from the hydroperoxo moiety to the nearby N atom of the corrole ring, generating an alkylperoxo Mn(iii) complex. The alkylperoxo O–O bond cleavage affords a Mn(v)–oxo complex and a hydroxylated substrate. This novel mechanism for the Mn(v)–oxo formation via an alkylperoxo Mn(iii) intermediate gives insight into the O–O bond activation by manganese complexes.

DFT calculations revealed a novel mechanism for the formation of Mn(v)–oxo in the dioxygen activation by a Mn(iii) corrole complex involving a Mn(iii)–alkylperoxo intermediate.

Closed Shell Iron(IV) Oxo Complex with an Fe-O Triple Bond: Computational Design, Synthesis, and Reactivity

Iron(IV)-oxo intermediates in nature contain two unpaired electrons in the Fe-O antibonding orbitals, which are thought to contribute to their high reactivity. To challenge this hypothesis, we designed and synthesized closed-shell singlet iron(IV) oxo complex [(quinisox)Fe(O)]+ (1+ ; quinisox-H=(N-(2-(2-isoxazoline-3-yl)phenyl)quinoline-8-carboxamide). We identified the quinisox ligand by DFT computational screening out of over 450 candidates. After the ligand synthesis, we detected 1+ in the gas phase and confirmed its spin state by visible and infrared photodissociation spectroscopy (IRPD). The Fe-O stretching frequency in 1+ is 960.5 cm-1 , consistent with an Fe-O triple bond, which was also confirmed by multireference calculations. The unprecedented bond strength is accompanied by high gas-phase reactivity of 1+ in oxygen atom transfer (OAT) and in proton-coupled electron transfer reactions. This challenges the current view of the spin-state driven reactivity of the Fe-O complexes.

Computational Studies on the Mechanism and Origin of the Different Regioselectivities of Manganese Porphyrin-Catalyzed C-H Bond Hydroxylation and Amidation of Equilenin Acetate

The manganese porphyrin-catalyzed C-H bond hydroxylation and amidation of equilenin acetate developed by Breslow and his co-worker have been investigated with density functional theory (DFT) calculations. The hydroxylation of C(sp²)-H bond of equilenin acetate leading to the 6-hydroxylated product is more favorable than the hydroxylation of C(sp³)-H bond of equilenin acetate, leading to the 11β-hydroxylation product. The computational results suggest that the C(sp²)-H bond hydroxylation of equilenin acetate undergoes an oxygen-atom-transfer mechanism, which is more favorable than the C(sp³)-H bond hydroxylation undergoing the hydrogen-atom-abstraction/oxygen-rebound (HAA/OR) mechanism by 1.6 kcal/mol. That is why, the 6-hydroxylated product is the major product and the 11β-hydroxylated product is the minor product. In contrast, the 11β-amidated product is the only observed product in manganese porphyrin-catalyzed amidation reaction. The benzylic amidation undergoes a hydrogen-atom-abstraction/nitrogen-rebound (HAA/NR) mechanism, in which hydrogen atom abstraction is followed by nitrogen rebound, leading to the 11β-amidated product. The benzylic C(sp³)-H bond amidation at the C-11 position is more favorable than aromatic amidation at the C-6 position by 4.9 kcal/mol. Therefore, the DFT computational results are consistent with the experiments that manganese porphyrin-catalyzed C-H bond hydroxylation and amidation of equilenin acetate have different regioselectivities.

Unprecedented Reactivities of Highly Reactive Manganese(III)-Iodosylarene Porphyrins in Oxidation Reactions

We report that Mn(III)-iodosylarene porphyrins, [Mn^III(Porp)(^sArIO)]⁺, are capable of activating the C-H bonds of hydrocarbons, including unactivated alkanes such as cyclohexane, with unprecedented reactivities, such as a low kinetic isotope effect, a saturation behavior of reaction rates, and no electronic effect of porphyrin ligands on the reactivities of [Mn^III(Porp)(^sArIO)]⁺. In oxygen atom transfer (OAT) reactions, the sulfoxidation of para-X-substituted thioanisoles by [Mn^III(Porp)(^sArIO)]⁺ affords a very unusual behavior in the Hammett plot with the saturation behavior of reaction rates and no electronic effect of porphyrin ligands on reactivities. The reactivities and mechanisms of [Mn^III(Porp)(^sArIO)]⁺ are then compared with those of the corresponding Mn^IV(Porp)(O) complex. The present study reports the first example of highly reactive Mn(III)-iodosylarene porphyrins with unprecedented reactivities in C-H bond activation and OAT reactions.

Spectroscopic capture of a low-spin Mn(IV)-oxo species in Ni-Mn3O4 nanoparticles during water oxidation catalysis

High-valent metal-oxo moieties have been implicated as key intermediates preceding various oxidation processes. The critical O-O bond formation step in the Kok cycle that is presumed to generate molecular oxygen occurs through the high-valent Mn-oxo species of the water oxidation complex, i.e., the Mn4Ca cluster in photosystem II. Here, we report the spectroscopic characterization of new intermediates during the water oxidation reaction of manganese-based heterogeneous catalysts and assign them as low-spin Mn(IV)-oxo species. Recently, the effects of the spin state in transition metal catalysts on catalytic reactivity have been intensely studied; however, no detailed characterization of a low-spin Mn(IV)-oxo intermediate species currently exists. We demonstrate that a low-spin configuration of Mn(IV), S = 1/2, is stably present in a heterogeneous electrocatalyst of Ni-doped monodisperse 10-nm Mn3O4 nanoparticles via oxo-ligand field engineering. An unprecedented signal (g = 1.83) is found to evolve in the electron paramagnetic resonance spectrum during the stepwise transition from the Jahn-Teller-distorted Mn(III). In-situ Raman analysis directly provides the evidence for Mn(IV)-oxo species as the active intermediate species. Computational analysis confirmed that the substituted nickel species induces the formation of a z-axis-compressed octahedral C4v crystal field that stabilizes the low-spin Mn(IV)-oxo intermediates.

How Does Replacement of the Axial Histidine Ligand in Cytochrome c Peroxidase by Nδ-Methyl Histidine Affect Its Properties and Functions? A Computational Study

Heme peroxidases have important functions in nature related to the detoxification of H₂O₂. They generally undergo a catalytic cycle where, in the first stage, the iron(III)-heme-H₂O₂ complex is converted into an iron(IV)-oxo-heme cation radical species called Compound I. Cytochrome c peroxidase Compound I has a unique electronic configuration among heme enzymes where a metal-based biradical is coupled to a protein radical on a nearby Trp residue. Recent work using the engineered N_δ-methyl histidine-ligated cytochrome c peroxidase highlighted changes in spectroscopic and catalytic properties upon axial ligand substitution. To understand the axial ligand effect on structure and reactivity of peroxidases and their axially N_δ-methyl histidine engineered forms, we did a computational study. We created active site cluster models of various sizes as mimics of horseradish peroxidase and cytochrome c peroxidase Compound I. Subsequently, we performed density functional theory studies on the structure and reactivity of these complexes with a model substrate (styrene). Thus, the work shows that the N_δ-methyl histidine group has little effect on the electronic configuration and structure of Compound I and little changes in bond lengths and the same orbital occupation is obtained. However, the N_δ-methyl histidine modification impacts electron transfer processes due to a change in the reduction potential and thereby influences reactivity patterns for oxygen atom transfer. As such, the substitution of the axial histidine by N_δ-methyl histidine in peroxidases slows down oxygen atom transfer to substrates and makes Compound I a weaker oxidant. These studies are in line with experimental work on N_δ-methyl histidine-ligated cytochrome c peroxidases and highlight how the hydrogen bonding network in the second coordination sphere has a major impact on the function and properties of the enzyme.

Theoretical Study on the Structural-Function Relationship of Manganese(III)-Iodosylarene Adducts

Metal-iodosylarene complexes have been recently viewed as a second oxidant alongside of the well-known high-valent metal-oxo species. Extensive efforts have been exerted to unveil the structure-function relationship of various metal-iodosylarene complexes. In the present manuscript, density functional theoretical calculations were employed to investigate such relationship of a specific manganese-iodosylbenzene complex [Mn^III(TBDAP)(PhIO)(OH)]²⁺ (1). Our results fit the experimental observations and revealed new mechanistic findings. 1 acts as a stepwise 1e+1e oxidant in sulfoxidation reactions. Surprisingly, C-H bond activation of 9,10-dihydroanthracene (DHA) by 1 proceeds via a novel ionic hydride transfer/proton transfer (HT/PT) mechanism. As a comparison to 1, the electrophilicity of an iodosylbenzene monomer PhIO was investigated. PhIO performs concerted 2e-oxidations both in sulfoxidation and C-H activation. Hydroxylation of DHA by PhIO was found to proceed via a novel ionic and concerted proton-transfer/hydroxyl-rebound mechanism involving 2e-oxidation to form a transient carbonium species.

Catalytic Mechanism of Aromatic Nitration by Cytochrome P450 TxtE: Involvement of a Ferric-Peroxynitrite Intermediate

The cytochromes P450 are heme-dependent enzymes that catalyze many vital reaction processes in the human body related to biodegradation and biosynthesis. They typically act as mono-oxygenases; however, the recently discovered P450 subfamily TxtE utilizes O₂ and NO to nitrate aromatic substrates such as L-tryptophan. A direct and selective aromatic nitration reaction may be useful in biotechnology for the synthesis of drugs or small molecules. Details of the catalytic mechanism are unknown, and it has been suggested that the reaction should proceed through either an iron(III)-superoxo or an iron(II)-nitrosyl intermediate. To resolve this controversy, we used stopped-flow kinetics to provide evidence for a catalytic cycle where dioxygen binds prior to NO to generate an active iron(III)-peroxynitrite species that is able to nitrate l-Trp efficiently. We show that the rate of binding of O₂ is faster than that of NO and also leads to l-Trp nitration, while little evidence of product formation is observed from the iron(II)-nitrosyl complex. To support the experimental studies, we performed density functional theory studies on large active site cluster models. The studies suggest a mechanism involving an iron(III)-peroxynitrite that splits homolytically to form an iron(IV)-oxo heme (Compound II) and a free NO₂ radical via a small free energy of activation. The latter activates the substrate on the aromatic ring, while compound II picks up the ipso-hydrogen to form the product. The calculations give small reaction barriers for most steps in the catalytic cycle and, therefore, predict fast product formation from the iron(III)-peroxynitrite complex. These findings provide the first detailed insight into the mechanism of nitration by a member of the TxtE subfamily and highlight how the enzyme facilitates this novel reaction chemistry.

Spin-inversion mechanisms in O2 binding to a model heme compound: A perspective from nonadiabatic wave packet calculations

Spin-inversion dynamics in O₂ binding to a model heme complex, which consisted of Fe(II)-porphyrin and imidazole, were studied using nonadiabatic wave packet dynamics calculations. We considered three active nuclear degrees of freedom in the dynamics, including the motions along the Fe-O distance, Fe-O-O angle, and Fe out-of-plane distance. Spin-free potential energy surfaces for the singlet, triplet, quintet, and septet states were developed using density functional theory calculations, and spin-orbit coupling elements were obtained from CASSCF-level electronic structure calculations. The spin-inversion mainly occurred between the singlet state and one of the triplet states due to large spin-orbit couplings and the contributions of other states were extremely small. The present quantum dynamics calculations suggested that the narrow crossing region model plays a dominant role in the O₂ binding dynamics. In addition, the one-dimensional Landau-Zener model underestimated the nonadiabatic transition probability.

Fe2+/HClO Reaction Produces FeIVO2+: An Enhanced Advanced Oxidation Process

The reaction between Fe²⁺ and HClO constitutes a promising advanced oxidation process (AOP) for removing pollutants from wastewater, and ^•OH has been considered the dominant reactive oxidant despite limited evidence for this. Herein, we demonstrate that the Fe²⁺/HClO reaction enables the production of Fe^IVO²⁺ rather than ^•OH in acid medium, a finding that is strongly supported by multiple lines of evidence. Both X-ray absorption near-edge structure spectroscopic tests and Mössbauer spectroscopic tests confirmed the appearance of Fe^IVO²⁺ as the reactive intermediate in the reaction between Fe²⁺ and HClO. The determination of Fe^IVO²⁺ generation was also derived from the methyl phenyl sulfoxide (PMSO)-based probe experiments with respect to the formation of PMSO₂ without ^•OH adducts and the density functional theory studies according to the lower energy barrier for producing Fe^IVO²⁺ compared with ^•OH. A dual-anode electrolytic system was established for the in situ generation of Fe²⁺ and HClO that allows the production of Fe^IVO²⁺. The system exhibits an enhanced capacity for oxidizing a model pollutant (e.g., phosphite) from industrial wastewater, making it an attractive and promising AOP for the abatement of aqueous contaminants.

Spin-inversion mechanisms in O2 binding to a model heme complex revisited by density function theory calculations

Spin-inversion mechanisms in O₂ binding to a model heme complex, consisting of Fe(II)-porphyrin and imidazole, were investigated using density-functional theory calculations. First, we applied the recently proposed mixed-spin Hamiltonian method to locate spin-inversion structures between different total spin multiplicities. Nine spin-inversion structures were successfully optimized for the singlet-triplet, singlet-quintet, triplet-quintet, and quintet-septet spin-inversion processes. We found that the singlet-triplet spin-inversion points are located around the potential energy surface region at short Fe-O distances, whereas the singlet-quintet and quintet-septet spin-inversion points are located at longer Fe-O distances. This suggests that both narrow and broad crossing models play roles in O₂ binding to the Fe-porphyrin complex. To further understand spin-inversion mechanisms, we performed on-the-fly Born-Oppenheimer molecular dynamics calculations. The reaction coordinates, which are correlated to the spin-inversion dynamics between different spin multiplicities, are also discussed.

Hydrogen Atom Abstraction by High-Valent Fe(OH) versus Mn(OH) Porphyrinoid Complexes: Mechanistic Insights from Experimental and Computational Studies

High-valent metal-hydroxide species have been implicated as key intermediates in hydroxylation chemistry catalyzed by heme monooxygenases such as the cytochrome P450s. However, in some classes of P450s, a bifurcation from the typical oxygen rebound pathway is observed, wherein the Fe^IV(OH)(porphyrin) species carries out a net hydrogen atom transfer reaction to form alkene metabolites. In this work, we examine the hydrogen atom transfer (HAT) reactivity of Fe^IV(OH)(ttppc) (1), ttppc = 5,10,15-tris(2,4,6-triphenyl)-phenyl corrole, toward substituted phenol derivatives. The iron hydroxide complex 1 reacts with a series of para-substituted 2,6-di-tert-butylphenol derivatives (4-X-2,6-DTBP; X = OMe, Me, Et, H, Ac), with second-order rate constants k₂ = 3.6(1)-1.21(3) × 10⁴ M^-1 s^-1 and yielding linear Hammett and Marcus plot correlations. It is concluded that the rate-determining step for O-H cleavage occurs through a concerted HAT mechanism, based on mechanistic analyses that include a KIE = 2.9(1) and DFT calculations. Comparison of the HAT reactivity of 1 to the analogous Mn complex, Mn^IV(OH)(ttppc), where only the central metal ion is different, indicates a faster HAT reaction and a steeper Hammett slope for 1. The O-H bond dissociation energy (BDE) of the M^III(HO-H) complexes were estimated from a kinetic analysis to be 85 and 89 kcal mol^-1 for Mn and Fe, respectively. These estimated BDEs are closely reproduced by DFT calculations and are discussed in the context of how they influence the overall H atom transfer reactivity.

Reactivity patterns of vanadium(iv/v)-oxo complexes with olefins in the presence of peroxides: a computational study

Vanadium porphyrin complexes are naturally occurring substances found in crude oil and have been shown to have medicinal properties as well. Little is known on their activities with substrates; therefore, we decided to perform a detailed density functional theory study on the properties and reactivities of vanadium(iv)- and vanadium(v)-oxo complexes with a TPPCl8 or 2,3,7,8,12,13,17,18-octachloro-meso-tetraphenylporphyrinato ligand system. In particular, we investigated the reactivity of [VV(O)(TPPCl8)]+ and [VIV(O)(TPPCl8)] with cyclohexene in the presence of H2O2 or HCO4-. The work shows that vanadium(iv)-oxo and vanadium(v)-oxo are sluggish oxidants by themselves and react with olefins slowly. However, in the presence of hydrogen peroxide, these metal-oxo species can be transformed into a side-on vanadium-peroxo complex, which reacts with substrates more efficiently. Particularly with anionic axial ligands, the side-on vanadium-peroxo and vanadium-oxo complexes produced epoxides from cyclohexene via small barrier heights. In addition to olefin epoxidation, we investigated aliphatic hydroxylation mechanisms by the same oxidants and some oxidants show efficient and viable cyclohexene hydroxylation mechanisms. The work implies that vanadium-oxo and vanadium-peroxo complexes can react with double bonds through epoxidation, and under certain conditions also undergo hydroxylation, but the overall reactivity is highly dependent on the equatorial ligand, the local environment and the presence or absence of anionic axial ligands.

High-Spin Mn(V)-Oxo Intermediate in Nonheme Manganese Complex-Catalyzed Alkane Hydroxylation Reaction: Experimental and Theoretical Approach

Mononuclear nonheme manganese complexes are highly efficient catalysts in the catalytic oxidation of hydrocarbons by hydrogen peroxide in the presence of carboxylic acids. Although high-valent Mn(V)-oxo complexes have been proposed as the active oxidants that afford high regio-, stereo-, and enantioselectivities in the catalytic oxidation reactions, the importance of the spin state (e.g., S = 0 or 1) of the proposed Mn(V)-oxo species is an area that requires further study. In the present study, we have theoretically demonstrated that a mononuclear nonheme Mn(V)-oxo species with an S = 1 ground spin state is the active oxidant that effects the stereo- and enantioselective alkane hydroxylation reaction; it is noted that synthetic octahedral Mn(V)-oxo complexes, characterized spectroscopically and/or structurally, possess an S = 0 spin state and are sluggish oxidants. In an experimental approach, we have investigated the catalytic hydroxylation of alkanes by a mononuclear nonheme Mn(II) complex, [(S-PMB)Mn^II]²⁺, and H₂O₂ in the presence of carboxylic acids; alcohol is the major product with high stereo- and enantioselectivities. A synthetic Mn(IV)-oxo complex, [(S-PMB)Mn^IV(O)]²⁺, is inactive in C-H bond activation reactions, ruling out the Mn(IV)-oxo species as an active oxidant. DFT calculations have shown that a Mn(V)-oxo species with an S = 1 spin state, [(S-PMB)Mn^V(O)(OAc)]²⁺, is highly reactive and capable of oxygenating the C-H bond via oxygen rebound mechanism; we propose that the triplet spin state of the Mn(V)-oxo species results from the consequence of breaking the equatorial symmetry due to the binding of an equatorial oxygen from an acetate ligand. Thus, the present study reports that, different from the previously reported S = 0 Mn(V)-oxo species, Mn(V)-oxo species with a triplet ground spin state are highly reactive oxidants that are responsible for the regio-, stereo-, and enantioselectivities in the catalytic hydroxylation of alkanes by mononuclear nonheme manganese complexes and terminal oxidants.

Properties and reactivity of μ-nitrido-bridged dimetal porphyrinoid complexes: how does ruthenium compare to iron?

Methane hydroxylation by metal-oxo oxidants is one of the Holy Grails in biomimetic and biotechnological chemistry. The only enzymes known to perform this reaction in Nature are iron-containing soluble methane monooxygenase and copper-containing particulate methane monooxygenase. Furthermore, few biomimetic iron-containing oxidants have been designed that can hydroxylate methane efficiently. Recent studies reported that μ-nitrido-bridged diiron(IV)-oxo porphyrin and phthalocyanine complexes hydroxylate methane to methanol efficiently. To find out whether the reaction rates are enhanced by replacing iron by ruthenium, we performed a detailed computational study. Our work shows that the μ-nitrido-bridged diruthenium(IV)-oxo reacts with methane via hydrogen atom abstraction barriers that are considerably lower in energy (by about 5 kcal mol^‒1) as compared to the analogous diiron(IV)-oxo complex. An analysis of the electronic structure implicates similar spin and charge distributions for the diiron(IV)-oxo and diruthenium(IV)-oxo complexes, but the strength of the O‒H bond formed during the reaction is much stronger for the latter. As such a larger hydrogen atom abstraction driving force for the Ru complex than for the Fe complex is found, which should result in higher reactivity in the oxidation of methane.

Flavonol biosynthesis by nonheme iron dioxygenases: A computational study into the structure and mechanism

Plants produce flavonol compounds for vital functions regarding plant growth, fruit and flower colouring as well as fruit ripening processes. Several of these biosynthesis steps are stereo- and regioselective and are being carried out by nonheme iron enzymes. Using density functional theory calculations on a large active site model complex of flavanone-3β-hydroxylase (FHT), we established the mechanism for conversion of naringenin to its dihydroflavonol, which is a key step in the mechanism of flavonol biosynthesis. The reaction starts with dioxygen binding to the iron(II) centre and a reaction with α-ketoglutarate co-substrate gives succinate, an iron(IV)-oxo species and CO₂ with large exothermicity and small reaction barriers. The rate-determining reaction step in the mechanism; however, is hydrogen atom abstraction of an aliphatic CH bond by the iron(IV)-oxo species. We identify a large kinetic isotope effect for the replacement of the transferring hydrogen atom by deuterium. In a final step the OH and substrate radicals combine to form the alcohol product with a barrier of several kcal mol^-1. We show that the latter is the result of geometric constraints in the active site pocket. Furthermore, the calculations show that a weak tertiary CH bond is shielded from the iron(IV)-oxo species in the substrate binding position and therefore the enzyme is able to activate a stronger CH bond. As such, the flavanone-3β-hydroxylase enzyme reacts regioselectively with one specific CH bond of naringenin by avoiding activation of weaker bonds through tight substrate and oxidant positioning.

Bridging the Homogeneous-Heterogeneous Divide: Modeling Spin for Reactivity in Single Atom Catalysis

Single atom catalysts (SACs) are emergent catalytic materials that have the promise of merging the scalability of heterogeneous catalysts with the high activity and atom economy of homogeneous catalysts. Computational, first-principles modeling can provide essential insight into SAC mechanism and active site configuration, where the sub-nm-scale environment can challenge even the highest-resolution experimental spectroscopic techniques. Nevertheless, the very properties that make SACs attractive in catalysis, such as localized d electrons of the isolated transition metal center, make them challenging to study with conventional computational modeling using density functional theory (DFT). For example, Fe/N-doped graphitic SACs have exhibited spin-state dependent reactivity that remains poorly understood. However, spin-state ordering in DFT is very sensitive to the nature of the functional approximation chosen. In this work, we develop accurate benchmarks from correlated wavefunction theory (WFT) for relevant octahedral complexes. We use those benchmarks to evaluate optimal DFT functional choice for predicting spin state ordering in small octahedral complexes as well as models of pyridinic and pyrrolic nitrogen environments expected in larger SACs. Using these guidelines, we determine Fe/N-doped graphene SAC model properties and reactivity as well as their sensitivities to DFT functional choice. Finally, we conclude with broad recommendations for computational modeling of open-shell transition metal single-atom catalysts.

Advances in Sustainable Catalysis: A Computational Perspective

The enormous challenge of moving our societies to a more sustainable future offers several exciting opportunities for computational chemists. The first principles approach to "catalysis by design" will enable new and much greener chemical routes to produce vital fuels and fine chemicals. This prospective outlines a wide variety of case studies to underscore how the use of theoretical techniques, from QM/MM to unrestricted DFT and periodic boundary conditions, can be applied to biocatalysis and to both homogeneous and heterogenous catalysts of all sizes and morphologies to provide invaluable insights into the reaction mechanisms they catalyze.

Interplay Between Steric and Electronic Effects: A Joint Spectroscopy and Computational Study of Nonheme Iron(IV)-Oxo Complexes

Iron is an essential element in nonheme enzymes that plays a crucial role in many vital oxidative transformations and metabolic reactions in the human body. Many of those reactions are regio- and stereospecific and it is believed that the selectivity is guided by second-coordination sphere effects in the protein. Here, results are shown of a few engineered biomimetic ligand frameworks based on the N4Py (N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) scaffold and the second-coordination sphere effects are studied. For the first time, selective substitutions in the ligand framework have been shown to tune the catalytic properties of the iron(IV)-oxo complexes by regulating the steric and electronic factors. In particular, a better positioning of the oxidant and substrate in the rate-determining transition state lowers the reaction barriers. Therefore, an optimum balance between steric and electronic factors mediates the ideal positioning of oxidant and substrate in the rate-determining transition state that affects the reactivity of high-valent reaction intermediates.

Equatorial ligand plane perturbations lead to a spin-state change in an iron(iii) porphyrin dimer

A complete reversal of the spin state of iron(iii) is observed upon a small change to the diporphyrin bridge from ethane to ethene by keeping all other factors intact.

Selective Formation of an FeIV O or an FeIII OOH Intermediate From Iron(II) and H2 O2 : Controlled Heterolytic versus Homolytic Oxygen-Oxygen Bond Cleavage by the Second Coordination Sphere

We demonstrate that the devised incorporation of an alkylamine group into the second coordination sphere of an Fe^II complex allows to switch its reactivity with H₂ O₂ from the usual formation of Fe^III species towards the selective generation of an Fe^IV -oxo intermediate. The Fe^IV -oxo species was characterized by UV/Vis absorption and Mössbauer spectroscopy. Variable-temperature kinetic analyses point towards a mechanism in which the heterolytic cleavage of the O-O bond is triggered by a proton transfer from the proximal to the distal oxygen atom in the Fe^II -H₂ O₂ complex with the assistance of the pendant amine. DFT studies reveal that this heterolytic cleavage is actually initiated by an homolytic O-O cleavage immediately followed by a proton-coupled electron transfer (PCET) that leads to the formation of the Fe^IV -oxo and release of water through a concerted mechanism.

Factors Affecting Hydrogen Atom Transfer Reactivity of Metal-Oxo Porphyrinoid Complexes

There has been considerable interest in hydrogen atom transfer (HAT) reactions mediated by metal/oxygen species because of their central role in metalloenzyme function as well as synthetic catalysts. This Account focuses on our progress in synthesizing high-valent metal-oxo and metal-hydroxo porphyrinoid complexes and determining their reactivities in a range of HAT processes. For these studies we have utilized corrolazine and corrole ligands, which are a ring-contracted subclass of porphyrinoid compounds designed to stabilize high-valent metal complexes. The high-valent manganese complex Mn^V(O)(TBP₈Cz) (TBP₈Cz = octakis(4- tert-butylphenyl)corrolazine^3-) provided an early example of a well-characterized low-potential oxidant that can still be effective at abstracting H atoms from certain C-H/O-H bonds. Approximating the thermodynamics of the HAT reactivity of the Mn^V(O) complex and related species with the help of a square scheme approach, in which HAT can be formally separated into proton (p K_a) and electron transfers ( E°), indicates that affinity for the proton (i.e., the basicity) is a key factor in promoting HAT. Anionic axial ligands have a profound influence on the HAT reactivity of Mn^V(O)(TBP₈Cz), supporting the conclusion that basicity is a critical parameter in determining the reactivity. The influence of Lewis acids on Mn^V(O)(TBP₈Cz) was examined, and it was shown that both the electronic structure and reactivity toward HAT were significantly altered. High-valent Cr(O), Re(O), and Fe(O) corrolazines were prepared, and a range of HAT reactions were studied with these complexes. The chromium and manganese complexes form a rare pair of structurally characterized Cr^V(O) and Mn^V(O) species in identical ligand environments, allowing for a direct comparison of their HAT reactivities. Although the Cr^V(O) species was the better oxidant as measured by redox potentials, the Mn^V(O) species was significantly more reactive in HAT oxidations, pointing again to basicity as a key determinant of HAT reactivity. The iron complex, Fe^IV(O)(TBP₈Cz^+•), is an analogue of the heme enzyme Compound I intermediate, and was found to be mildly reactive toward H atom abstraction from C-H bonds. In contrast, Re^V(O)(TBP₈Cz) was inert toward HAT, although one-electron oxidation to Re^V(O)(TBP₈Cz^+•) led to some interesting reactivity mediated by the π-radical-cation ligand alone. Other ligand modifications, including peripheral substitution as well as novel alkylation of the meso position on the Cz core, were examined for their influence on HAT. A highly sterically encumbered corrole, tris(2,4,6-triphenylphenyl)corrole (ttppc), was employed for the isolation and structural characterization of the first Mn^IV(OH) complex in a porphyrinoid environment, Mn^IV(OH)(ttppc). This complex was highly reactive in HAT with O-H substrates and was found to be much more reactive than its higher-oxidation-state counterpart Mn^V(O)(ttppc), providing important mechanistic insights. These studies provided fundamental knowledge on the relationship between structure and function in high-valent M(O) and M(OH) models of heme enzyme reactivity.

Does Substrate Positioning Affect the Selectivity and Reactivity in the Hectochlorin Biosynthesis Halogenase?

In this work we present the first computational study on the hectochlorin biosynthesis enzyme HctB, which is a unique three-domain halogenase that activates non-amino acid moieties tethered to an acyl-carrier, and as such may have biotechnological relevance beyond other halogenases. We use a combination of small cluster models and full enzyme structures calculated with quantum mechanics/molecular mechanics methods. Our work reveals that the reaction is initiated with a rate-determining hydrogen atom abstraction from substrate by an iron (IV)-oxo species, which creates an iron (III)-hydroxo intermediate. In a subsequent step the reaction can bifurcate to either halogenation or hydroxylation of substrate, but substrate binding and positioning drives the reaction to optimal substrate halogenation. Furthermore, several key residues in the protein have been identified for their involvement in charge-dipole interactions and induced electric field effects. In particular, two charged second coordination sphere amino acid residues (Glu223 and Arg245) appear to influence the charge density on the Cl ligand and push the mechanism toward halogenation. Our studies, therefore, conclude that nonheme iron halogenases have a chemical structure that induces an electric field on the active site that affects the halide and iron charge distributions and enable efficient halogenation. As such, HctB is intricately designed for a substrate halogenation and operates distinctly different from other nonheme iron halogenases.