Redox-Active Esters in Fe-Catalyzed C-C Coupling

Development of Potent Microtubule Targeting Agent by Structural Simplification of Natural Diazonamide

The marine metabolite diazonamide A exerts low nanomolar cytotoxicity against a range of tumor cell lines; however, its highly complex molecular architecture undermines the therapeutic potential of the natural product. We demonstrate that truncation of heteroaromatic macrocycle in natural diazonamide A, combined with the replacement of the challenging-to-synthesize tetracyclic hemiaminal subunit by oxindole moiety leads to considerably less complex analogues with improved drug-like properties and nanomolar antiproliferative potency. The structurally simplified macrocycles are accessible in 12 steps from readily available indolin-2-one and tert-leucine with excellent diastereoselectivity (99:1 dr) in the key macrocyclization step. The most potent macrocycle acts as a tubulin assembly inhibitor and exerts similar effects on A2058 cell cycle progression and induction of apoptosis as does marketed microtubule-targeting agent vinorelbine.

Selective Electrochemical Modification and Degradation of Polymers

We demonstrate that electrochemical-induced decarboxylation enables reliable post-polymerization modification and degradation of polymers. Polymers containing N-(acryloxy)phthalimides were subjected to electrochemical decarboxylation under mild conditions, which led to the formation of transient alkyl radicals. By installing these redox-active units, we systematically modified the pendent groups and chain ends of polyacrylates. This approach enabled the production of poly(ethylene-co-methyl acrylate) and poly(propylene-co-methyl acrylate) copolymers, which are difficult to synthesize by direct polymerization. Spectroscopic and chromatographic techniques reveal these transformations are near-quantitative on several polymer systems. Electrochemical decarboxylation also enables the degradation of all-methacrylate poly(N-(methacryloxy)phthalimide-co-methyl methacrylate) copolymers with a degradation efficiency of >95 %. Chain cleavage is achieved through the decarboxylation of the N-hydroxyphthalimide ester and subsequent β-scission of the backbone radical. Electrochemistry is thus shown to be a powerful tool in selective polymer transformations and controlled macromolecular degradation.

Electrochemical Synthesis of a Sitagliptin Precursor

A novel synthesis of sitagliptin based on a redox-active ester derived from the chiral pool is reported. The key step is an electrochemical nickel-catalyzed sp2-sp3 cross-coupling reaction using inexpensive nickel foam in an undivided cell. It was successfully applied to 21 examples in up to 88% yield. These sitagliptin-analogue precursors could potentially interact with the DPP4 enzyme. A full synthesis based on our new reaction pathway provided sitagliptin in an overall yield of 33%.

Carbon quaternization of redox active esters and olefins by decarboxylative coupling

The synthesis of quaternary carbons often requires numerous steps and complex conditions or harsh reagents that act on heavily engineered substrates. This is largely a consequence of conventional polar-bond retrosynthetic disconnections that in turn require multiple functional group interconversions, redox manipulations, and protecting group chemistry. Here, we report a simple catalyst and reductant combination that converts two types of feedstock chemicals, carboxylic acids and olefins, into tetrasubstituted carbons through quaternization of radical intermediates. An iron porphyrin catalyst activates each substrate by electron transfer or hydrogen atom transfer, and then combines the fragments using a bimolecular homolytic substitution (SH2) reaction. This cross-coupling reduces the synthetic burden to procure numerous quaternary carbon---containing products from simple chemical feedstocks.

Light-Driven Synthesis and Functionalization of Bicycloalkanes, Cubanes and Related Bioisosteres

Bicycloalkanes, cubanes and their structural analogues have emerged as bioisosteres of (hetero)arenes. To meet increasing demand, the chemical community has developed a plethora of novel synthetic methods. In this review, we assess the progress made in the field of light-driven construction and functionalization of such relevant molecules. We have focused on diverse structural targets, as well as on reaction processes giving access to: (i) [1.1.1]-bicyclopentanes (BCPs); (ii) [2.2.1]-bicyclohexanes (BCHs); (iii) [3.1.1]-bicycloheptanes (BCHeps); and (iv) cubanes; as well as other structurally related scaffolds. Finally, future perspectives dealing with the identification of novel reaction manifolds to access new functionalized bioisosteric units are discussed.

Electrochemical Synthesis of Unnatural Amino Acids Embedding 5- and 6-Membered Heteroaromatics

Using a commercially available potentiostat, the electrochemical synthesis of unnatural amino acids bearing heteroaromatics on the lateral chain has been accomplished. This strategy exploits the side-chain decarboxylative arylation of aspartic/glutamic acid, a reaction that becomes challenging with electron-rich coupling partners such as 5- and 6-membered heteroaromatics. These rings are underrepresented in unnatural amino acids, therefore allowing a wider exploration of the chemical space, given the abundance of the aryl bromides employable in this reaction.

Organometallic Bridge Diversification of Bicyclo[1.1.1]pentanes

Bicyclo[1.1.1]pentane (BCP) derivatives have attracted significant recent interest in drug discovery as alkyne, tert-butyl and arene bioisosteres, where their incorporation is frequently associated with increased compound solubility and metabolic stability. While strategies for functionalisation of the bridgehead (1,3) positions are extensively developed, platforms allowing divergent substitution at the bridge (2,4,5) positions remain limited. Recent reports have introduced 1-electron strategies for arylation and incorporation of a small range of other substituents, but are limited in terms of scope, yields or practical complexity. Herein, we show the synthesis of diverse 1,2,3-trifunctionalised BCPs through lithium-halogen exchange of a readily accessible BCP bromide. When coupled with medicinally relevant product derivatisations, our developed 2-electron "late stage" approach provides rapid and straightforward access to unprecedented BCP structural diversity (>20 hitherto-unknown motifs reported). Additionally, we describe a method for the synthesis of enantioenriched "chiral-at-BCP" bicyclo[1.1.1]pentanes through a novel stereoselective bridgehead desymmetrisation.

Mechanisms for radical reactions initiating from N-hydroxyphthalimide esters

Due to their ease of preparation, stability, and diverse reactivity, N-hydroxyphthalimide (NHPI) esters have found many applications as radical precursors. Mechanistically, NHPI esters undergo a reductive decarboxylative fragmentation to provide a substrate radical capable of engaging in diverse transformations. Their reduction via single-electron transfer (SET) can occur under thermal, photochemical, or electrochemical conditions and can be influenced by a number of factors, including the nature of the electron donor, the use of Brønsted and Lewis acids, and the possibility of forming charge-transfer complexes. Such versatility creates many opportunities to influence the reaction conditions, providing a number of parameters with which to control reactivity. In this perspective, we provide an overview of the different mechanisms for radical reactions involving NHPI esters, with an emphasis on recent applications in radical additions, cyclizations and decarboxylative cross-coupling reactions. Within these reaction classes, we discuss the utility of the NHPI esters, with an eye towards their continued development in complexity-generating transformations.

Visible-Light-Driven Decarboxylative Borylation: Rapid Access to α- and β-Amino-boronamides

In this study, we described a two-step process involving an efficient visible-light-induced decarboxylative borylation of α- and β-amino redox-active esters with bis(catecholato)diboron, followed by transamination with 1,8-diaminonapthalene (DANH2). A series of boronamides were obtained in moderate to excellent yields in this one-pot procedure. The photochemical process proved to be very efficient even when conducted under flow conditions with shorter reaction durations and scalable synthesis of DAN boronates.

Bicyclopentylation of Alcohols with Thianthrenium Reagents

Herein we present the first method for the synthesis of bicyclo[1.1.1]pentyl (BCP) alkyl ethers from alcohols. The reaction uses BCP-thianthrenium reagents and is catalyzed by a dual copper/photoredox catalyst system. Unlike known alkylations of tertiary alcohols via carbocation intermediates, our Cu-mediated radical process circumvents the labile BCP carbocations. The approach demonstrates a broad tolerance for functional groups when applied to primary, secondary, and even tertiary alcohols. In addition, we highlight the utility of this method in late-stage functionalizations of both natural products and pharmaceuticals as well as in the rapid construction of BCP analogs of known pharmaceuticals that would otherwise be difficult to access.

A Chemoselective Polarity-Mismatched Photocatalytic C(sp3 )-C(sp2 ) Cross-Coupling Enabled by Synergistic Boron Activation

We report the development of a C(sp3 )-C(sp2 ) coupling reaction using styrene boronic acids and redox-active esters under photoredox catalysis. The reaction proceeds through an unusual polarity-mismatched radical addition mechanism that is orthogonal to established processes. Synergistic activation of the radical precursor and organoboron are critical mechanistic events. Activation of an N-hydroxyphthalimide (NHPI) ester by coordination to boron enables electron transfer, with decomposition leading to a nucleofuge rebound, activating the organoboron to radical addition. The unique mechanism enables chemoselective coupling of styrene boronic acids in the presence of other alkene radical acceptors. The scope and limitations of the reaction, and a detailed mechanistic investigation are presented.

Synthesis of 1,3-disubstituted bicyclo[1.1.1]pentanes by cross-coupling induced by transition metals - formation of C-C bonds

The synthesis of 1,3-disubstituted bicyclo[1.1.1]pentanes (BCPs), by forming a C-C bond, can be achieved by cross-coupling reactions using transition metal catalysts. Two main strategies are described to access these 1,3-disubstituted BCPs, either from nucleophilic BCPs or electrophilic BCPs. Mechanisms are included where relevant.

2-Oxabicyclo[2.2.2]octane as a new bioisostere of the phenyl ring

The phenyl ring is a basic structural element in chemistry. Here, we show the design, synthesis, and validation of its new saturated bioisostere with improved physicochemical properties - 2-oxabicyclo[2.2.2]octane. The design of the structure is based on the analysis of the advantages and disadvantages of the previously used bioisosteres: bicyclo[1.1.1]pentane, bicyclo[2.2.2]octane, and cubane. The key synthesis step is the iodocyclization of cyclohexane-containing alkenyl alcohols with molecular iodine in acetonitrile. 2-Oxabicyclo[2.2.2]octane core is incorporated into the structure of Imatinib and Vorinostat (SAHA) drugs instead of the phenyl ring. In Imatinib, such replacement leads to improvement of physicochemical properties: increased water solubility, enhanced metabolic stability, and reduced lipophilicity. In Vorinostat, such replacement results in a new bioactive analog of the drug. This study enhances the repertoire of available saturated bioisosteres of (hetero)aromatic rings for the use in drug discovery projects.

Lewis Acid Catalyzed Formal (3+2)-Cycloaddition of Bicyclo[1.1.0]butanes with Ketenes

Design, synthesis and application of benzene bioisosteres have attracted a lot of attention in the past 20 years. Recently, bicyclo[2.1.1]hexanes have emerged as highly attractive bioisosteres for ortho- and meta-substituted benzenes. Herein we report a mild, scalable and transition-metal-free protocol for the construction of highly substituted bicyclo[2.1.1]hexan-2-ones through Lewis acid catalyzed (3+2)-cycloaddition of bicyclo[1.1.0]-butane ketones with disubstituted ketenes. The reaction shows high functional group tolerance as documented by the successful preparation of various 3-alkyl-3-aryl as well as 3,3-bisalkyl bicyclo[2.1.1]hexan-2-ones (26 examples, up to 89 % yield). Postfunctionalization of the exocyclic ketone moiety is also demonstrated.

Recent Advances in C-H Functionalisation through Indirect Hydrogen Atom Transfer

The functionalisation of C-H bonds has been an enormous achievement in synthetic methodology, enabling new retrosynthetic disconnections and affording simple synthetic equivalents for synthons. Hydrogen atom transfer (HAT) is a key method for forming alkyl radicals from C-H substrates. Classic reactions, including the Barton nitrite ester reaction and Hofmann-Löffler-Freytag reaction, among others, provided early examples of HAT. However, recent developments in photoredox catalysis and electrochemistry have made HAT a powerful synthetic tool capable of introducing a wide range of functional groups into C-H bonds. Moreover, greater mechanistic insights into HAT have stimulated the development of increasingly site-selective protocols. Site-selectivity can be achieved through the tuning of electron density at certain C-H bonds using additives, a judicious choice of HAT reagent, and a solvent system. Herein, we describe the latest methods for functionalizing C-H/Si-H/Ge-H bonds using indirect HAT between 2018-2023, as well as a critical discussion of new HAT reagents, mechanistic aspects, substrate scopes, and background contexts of the protocols.

Photocatalyzed Dowd-Beckwith radical-polar crossover reaction for the synthesis of medium-sized carbocyclic compounds

The Dowd-Beckwith reaction, a ring-expansion of carbonyl compounds via alkoxy radicals, is a powerful approach for synthesizing medium to large-sized carbocyclic scaffolds, which takes advantage of existing ring structures and avoids entropic and enthalpic factors that arise from the end-to-end cyclization strategies. However, the Dowd-Beckwith ring-expansion followed by H-atom abstraction is still the dominating pathway, which hampers its synthetic applications, and there currently exist no reports on the functionalization of ring-expanded radicals using non-carbon based nucleophilic reagents. Herein, we report a redox-neutral decarboxylative Dowd-Beckwith/radical-polar crossover (RPC) sequence that delivers functionalized medium-sized carbocyclic compounds with broad functional group tolerance. The reaction allows one-carbon ring-expansion of 4-, 5-, 6-, 7-, and 8-membered ring substrates and can also be applied to three-carbon chain incorporation, enabling remote functionalization in medium-sized rings.

A General and Practical Route to Functionalized Bicyclo[1.1.1]Pentane-Heteroaryls Enabled by Photocatalytic Multicomponent Heteroarylation of [1.1.1]Propellane

1-Aryl-substituted bicyclo[1.1.1]pentanes (BCPs) are an important class of BCP derivatives with widespread application in drug development. Most syntheses of these materials require multiple chemical steps via BCP electrophiles or nucleophiles derived from [1.1.1]propellane. Although one-step, multicomponent radical cross-coupling reactions could provide a more sustainable and rapid route to access diverse heteroarylated BCPs, current approaches are limited to tertiary alkyl radicals, leading to a decrease in their practical value. In this study, a conceptually different approach enabled by a radical multicomponent heteroarylation of [1.1.1]propellane to access functionalized heteroarylated BCPs is described. Importantly, this protocol is compatible with primary-, secondary-, and tertiary aliphatic radicals, as well as various fluoroalkyl radical sources, thus enabling rapid library generation of sought-after BCP derivatives for drug development.

General access to cubanes as benzene bioisosteres

The replacement of benzene rings with sp3-hybridized bioisosteres in drug candidates generally improves pharmacokinetic properties while retaining biological activity1-5. Rigid, strained frameworks such as bicyclo[1.1.1]pentane and cubane are particularly well suited as the ring strain imparts high bond strength and thus metabolic stability on their C-H bonds. Cubane is the ideal bioisostere as it provides the closest geometric match to benzene6,7. At present, however, all cubanes in drug design, like almost all benzene bioisosteres, act solely as substitutes for mono- or para-substituted benzene rings1-7. This is owing to the difficulty of accessing 1,3- and 1,2-disubstituted cubane precursors. The adoption of cubane in drug design has been further hindered by the poor compatibility of cross-coupling reactions with the cubane scaffold, owing to a competing metal-catalysed valence isomerization8-11. Here we report expedient routes to 1,3- and 1,2-disubstituted cubane building blocks using a convenient cyclobutadiene precursor and a photolytic C-H carboxylation reaction, respectively. Moreover, we leverage the slow oxidative addition and rapid reductive elimination of copper to develop C-N, C-C(sp3), C-C(sp2) and C-CF3 cross-coupling protocols12,13. Our research enables facile elaboration of all cubane isomers into drug candidates, thus enabling ideal bioisosteric replacement of ortho-, meta- and para-substituted benzenes.

Photoinduced Diastereoselective Aminoalkylation of Cubanes

The unique properties of rigid, nonconjugated hydrocarbons provide many opportunities to design molecular building blocks for a variety of applications, but the development of suitable conditions for alkylation of cubanes is quite challenging. Herein, a photoinduced method for aminoalkylation of cubanes is reported. The benign conditions reported allow the incorporation of a wide variety of (hetero)arylimine reaction partners with broad functional group tolerance and high diastereoselectivity.

NHC-Zn alkyl catalyzed cross-dehydrocoupling of amines and silanes

An N-heterocyclic carbene-zinc alkyl complex [Im^DippZn(CH₂CH₃)₂] (Im = imidazol-2-ylidene and Dipp = 2,6-diisopropylphenyl) acts as a catalyst in the cross-dehydrogenative coupling (CDC) of a wide range of primary and secondary amines and hydrosilanes to yield a substantial quantity of the corresponding aminosilanes with good chemoselectivity at room temperature. A broad substrate scope was observed during the zinc-catalyzed CDC reaction. Two zinc complexes, [{Im^MesZn(μ-NHPh)(NHPh)}₂] (Mes = mesityl) (3) and [{Im^DippZn(CH₂CH₃)(μ-H)}₂] (4), were isolated and structurally characterized as intermediates through controlled reactions to ascertain the CDC mechanism.

Pd-Catalyzed Arylation of Secondary α-Alkoxytricyclohexylstannanes

We have developed a general process for the formation of α-arylethers via the Pd-catalyzed arylation of secondary α-alkoxytricyclohexylstannanes. Incorporation of cyclohexyl spectator ligands into the alkylstannane and the use of the electron-deficient ligand JackiePhos (1) are critical for achieving selective alkyl transfer in this process. This system circumvents the need for a coordinating/directing oxygen-protecting group to promote selective alkyl transfer and enables α-tetrahydropyran, α-tetrahydrofuran, and open-chain secondary α-alkoxy groups to be employed efficiently in Pd-catalyzed Stille reactions with a broad range of aryl electrophiles. These findings suggest that selective transmetalation of a single marginally activated secondary alkyl unit from Sn to Pd should be broadly achievable provided that unactivated secondary alkyl ligands comprise the other three groups of the tetraalkylstannane.

Decarboxylative Cross-Coupling: A Radical Tool in Medicinal Chemistry

Carboxylic acids, the most versatile and ubiquitous diversity input used in medicinal chemistry for canonical polar bond constructions such as amide synthesis, can now be employed in a fundamentally different category of reaction to make C-C bonds by harnessing the power of radicals. This outlook serves as a user-guide to aid practitioners in both the design of syntheses that leverage the simplifying power of this disconnection and the precise tactics that can be employed to enable them. Taken together, this emerging area holds the potential to rapidly accelerate access to chemical space of value to modern medicinal chemistry.

Exploiting the sp2 character of bicyclo[1.1.1]pentyl radicals in the transition-metal-free multi-component difunctionalization of [1.1.1]propellane

Strained bicyclic substructures are increasingly relevant in medicinal chemistry discovery research because of their role as bioisosteres. Over the last decade, the successful use of bicyclo[1.1.1]pentane (BCP) as a para-disubstituted benzene replacement has made it a highly valuable pharmacophore. However, various challenges, including limited and lengthy access to useful BCP building blocks, are hampering early discovery research. Here we report a single-step transition-metal-free multi-component approach to synthetically versatile BCP boronates. Radicals derived from commonly available carboxylic acids and organohalides perform additions onto [1.1.1]propellane to afford BCP radicals, which then engage in polarity-matched borylation. A wide array of alkyl-, aryl- and alkenyl-functionalized BCP boronates were easily prepared. Late-stage functionalization performed on natural products and approved drugs proceeded with good efficiency to generate the corresponding BCP conjugates. Various photoredox transformations forging C-C and C-N bonds were demonstrated by taking advantage of BCP trifluoroborate salts derived from the BCP boronates.

Cobalt-catalyzed synthesis of aryl ketones and aldehydes from redox-active esters

A cobalt-catalyzed decarboxylative oxidation of benzylic redox-active esters is described. This protocol efficiently converts secondary or primary aliphatic carboxylic acids into aromatic ketones or aldehydes. A wide range of substrates selectively reacted in good to excellent yields with broad functional group tolerance. Notably, various biologically active molecules could also work well, which indicated the synthetic application of such a methodology.

Control of Redox‐Active Ester Reactivity Enables a General Cross‐Electrophile Approach to Access Arylated Strained Rings**

Strained rings are increasingly important for the design of pharmaceutical candidates, but cross‐coupling of strained rings remains challenging. An attractive, but underdeveloped, approach to diverse functionalized carbocyclic and heterocyclic frameworks containing all‐carbon quaternary centers is the coupling of abundant strained‐ring carboxylic acids with abundant aryl halides. Herein we disclose the development of a nickel‐catalyzed cross‐electrophile approach that couples a variety of strained ring N‐hydroxyphthalimide (NHP) esters, derived from the carboxylic acid in one step, with various aryl and heteroaryl halides under reductive conditions. The chemistry is enabled by the discovery of methods to control NHP ester reactivity, by tuning the solvent or using modified NHP esters, and the discovery that ^t‐BuBpyCam^CN, an L2X ligand, avoids problematic side reactions. This method can be run in flow and in 96‐well plates.

Dicarbofunctionalization of [1.1.1]Propellane Enabled by Nickel/Photoredox Dual Catalysis: One-Step Multicomponent Strategy for the Synthesis of BCP-Aryl Derivatives

Bicyclo[1.1.1]pentane (BCP) motifs as para-disubstituted aryl bioisosteres are playing an emerging role in pharmaceutical, agrochemical, and materials chemistry. The vast majority of these structures is obtained from a BCP electrophile or nucleophile, which are themselves derived from [1.1.1]propellane via cleavage of the internal C-C bond through the addition of either radicals or metal-based nucleophiles. Compared with the current stepwise approaches, a multicomponent reaction that provides direct access to complex and diverse disubstituted BCP products would be more attractive. Herein, we report a single-step, multicomponent approach to synthetically versatile arylated BCP products via nickel/photoredox catalysis. Importantly, this three-component process allows two C-C bonds to be formed in a single step and sets three quaternary centers, unprecedented in any previously reported methods. The method has been demonstrated to allow access to complex BCP architectures from aryl halide and radical precursor substrates.

Regio- and Stereoselective Electrochemical Alkylation of Morita-Baylis-Hillman Adducts

Electrosynthesis is effectively employed in a general regio- and stereoselective alkylation of Morita–Baylis–Hillman compounds. The exposition of N-acyloxyphthalimides (redox-active esters) to galvanostatic electroreductive conditions, following the sacrificial-anode strategy, is proved an efficient and practical method to access densely functionalized cinnamate and oxindole derivatives. High yields (up to 80%) and wide functional group tolerance characterized the methodology. A tentative mechanistic sketch is proposed based on dedicated control experiments.

Convergent total synthesis of (+)-calcipotriol: A scalable, modular approach to vitamin D analogs

A convergent approach for the total synthesis of calcipotriol (brand name: Dovonex), a proven vitamin D analog used for the treatment of psoriasis, and medicinally relevant synthetic analogs is described. A complete approach, not wedded to semisynthesis, toward both the A-ring and CD-ring is reported. From a retrosynthetic standpoint, hidden symmetry within the decorated A-ring is disclosed, which allowed for scalable quantities of this advanced intermediate. In addition, a radical retrosynthetic approach is described, which highlights an electrochemical reductive coupling as well as an intramolecular hydrogen atom transfer Giese addition to establish the 6,5-transcarbon skeleton found in the vitamin D family. Finally, a late-stage decarboxylative cross-coupling approach allowed for the facile preparation of various C20-arylated derivatives that show promising biological activity in an initial bioassay.

α-Branched amines through radical coupling with 2-azaallyl anions, redox active esters and alkenes

α-Branched amines are fundamental building blocks in a variety of natural products and pharmaceuticals. Herein is reported a unique cascade reaction that enables the preparation of α-branched amines bearing aryl or alkyl groups at the β- or γ-positions. The cascade is initiated by reduction of redox active esters to alkyl radicals. The resulting alkyl radicals are trapped by styrene derivatives, leading to benzylic radicals. The persistent 2-azaallyl radicals and benzylic radicals are proposed to undergo a radical-radical coupling leading to functionalized amine products. Evidence is provided that the role of the nickel catalyst is to promote formation of the alkyl radical from the redox active ester and not promote the C-C bond formation. The synthetic method introduced herein tolerates a variety of imines and redox active esters, allowing for efficient construction of amine building blocks.

Catalyst-controlled functionalization of carboxylic acids by electrooxidation of self-assembled carboxyl monolayers

While the electrooxidative activation of carboxylic acids is an attractive synthetic methodology, the resulting transformations are generally limited to either homocoupling or further oxidation followed by solvent capture. These reactions require extensive electrolysis at high potentials, which ultimately renders the methodology incompatible with metal catalysts that could possibly provide new and complementary product distributions. This work establishes a proof-of-concept for a rare and synthetically-underutilized strategy for selective electrooxidation of carboxylic acids in the presence of oxidatively-sensitive catalysts that control reaction selectivity. We leverage the formation of self-adsorbed monolayers of carboxylate substrates at the anode to promote selective oxidation of the adsorbed carboxylate over a more easily-oxidized catalyst. Consequently, reactions operate at lower potentials, greater faradaic efficiencies, and improved catalyst compatibility over conventional approaches, which enables reactions to be performed with inexpensive Fe complexes that catalyze selective radical additions to olefins.

This work leverages substrate self-assembly at an electrode to promote selective substrate electrooxidation in the presence of oxidatively sensitive catalysts. This strategy is applied to decarboxylative coupling of carboxylic acids with olefins.

Photoredox-Catalyzed Oxidative Radical-Polar Crossover Enables the Alkylfluorination of Olefins

The three-component alkylfluorination of olefins via an oxidative radical-polar crossover under visible light-induced photocatalysis is disclosed. A key feature of this reaction is the incorporation of two synthetically meaningful components involving a three-dimensional alkyl group and a fluorine atom using easily preparable N-hydroxyphthalimide esters as the alkyl donors and a low-cost hydrogen fluoride as the fluorine source. Furthermore, a one-step procedure using commercially available carboxylic acids demonstrated the versatility of this new method.

Nickel-Catalyzed Decarboxylative Coupling of Redox-Active Esters with Aliphatic Aldehydes

The addition of alkyl fragments to aliphatic aldehydes is a highly desirable transformation for fragment couplings, yet existing methods come with operational challenges related to the basicity and instability of the nucleophilic reagents commonly employed. We report herein that nickel catalysis using a readily available bioxazoline (BiOx) ligand can catalyze the reductive coupling of redox-active esters with aliphatic aldehydes using zinc metal as the reducing agent to deliver silyl-protected secondary alcohols. This protocol is operationally simple, proceeds under mild conditions, and tolerates a variety of functional groups. Initial mechanistic studies suggest a radical chain pathway. Additionally, alkyl tosylates and epoxides are suitable alkyl precursors to this transformation providing a versatile suite of catalytic reactions for the functionalization of aliphatic aldehydes.

Photocatalytic Decarboxylative Coupling of Aliphatic N-hydroxyphthalimide Esters with Polyfluoroaryl Nucleophiles

Polyfluoroarenes are an important class of compounds in medical and material chemistry. The synthesis of alkylated polyfluoroarenes remains challenging. Here we describe a decarboxylative coupling reaction of N-hydroxyphthalimide esters of aliphatic carboxylic acids with polyfluoroaryl zinc reagents (Zn-ArF ) via synergetic photoredox and copper catalysis. This method readily converts primary and secondary alkyl carboxylic acids into the corresponding polyfluoroaryl compounds, which could have a wide range of F-content (2F-5F) and variable F-substitution patterns on the aryl groups. Broad scope and good functional group compatibility were achieved, including on substrates derived from natural products and pharmaceuticals. Mechanistic study revealed that a [Cu-(ArF )2 ] species could be responsible for the transfer of polyfluoroaryl groups to the alkyl radicals.

The Formal Cross-Coupling of Amines and Carboxylic Acids to Form sp3 -sp3 Carbon-Carbon Bonds

We have developed a deaminative-decarboxylative protocol to form new carbon(sp³ )-carbon(sp³ ) bonds from activated amines and carboxylic acids. Amines and carboxylic acids are ubiquitous building blocks, available in broad chemical diversity and at lower cost than typical C-C coupling partners. To leverage amines and acids for C-C coupling, we developed a reductive nickel-catalyzed cross-coupling utilizing building block activation as pyridinium salts and redox-active esters, respectively. Miniaturized high-throughput experimentation studies were critical to our reaction optimization, with subtle experimental changes such as order of reagent addition, composition of a binary solvent system, and ligand identity having a significant impact on reaction performance. The developed protocol is used in the late-stage diversification of pharmaceuticals while more than one thousand systematically captured and machine-readable reaction datapoints are reposited.

An intramolecular coupling approach to alkyl bioisosteres for the synthesis of multisubstituted bicycloalkyl boronates

Bicyclic hydrocarbons, and bicyclo[1.1.1]pentanes (BCPs) in particular, are playing an emerging role as saturated bioisosteres in pharmaceutical, agrochemical and materials chemistry. Taking advantage of strain-release strategies, prior synthetic studies have featured the synthesis of bridgehead-substituted (C1, C3) BCPs from [1.1.1]propellane. Here, we describe an approach to access multisubstituted BCPs via intramolecular cyclization. In addition to C1,C3-disubstituted BCPs, this method also enables the construction of underexplored multisubstituted (C1, C2 and C3) BCPs from readily accessible cyclobutanones. The broad generality of this method has also been examined through the synthesis of a variety of other caged bicyclic molecules, ranging from [2.1.1] to [3.2.1] scaffolds. The modularity afforded by the pendant bridgehead boron pinacol esters generated during the cyclization reaction has been demonstrated through several downstream functionalizations, highlighting the ability of this approach to enable the programmed and divergent synthesis of multisubstituted bicyclic hydrocarbons.

Dual Photoredox/Nickel-Promoted Alkylation of Heteroaryl Halides with Redox-Active Esters

Herein a method for the radical alkylation of heteroaryl halides that relies upon the combination of photoredox and nickel catalysis is described. The use of aliphatic N-(acyloxy)phthalimides as redox-active esters affords primary and secondary radicals for the decarboxylative dual cross-coupling with pyrimidine and pyridine heteroaryl chlorides, bromides, and iodides. The method provides an additional synthetic tool for the incorporation of medicinally relevant heterocyclic motifs.

Combined Experimental and Computational Study of Ruthenium N-Hydroxyphthalimidoyl Carbenes in Alkene Cyclopropanation Reactions

A combined experimental-computational approach has been used to study the cyclopropanation reaction of N-hydroxyphthalimide diazoacetate (NHPI-DA) with various olefins, catalyzed by a ruthenium-phenyloxazoline (Ru-Pheox) complex. Kinetic studies show that the better selectivity of the employed redox-active NHPI diazoacetate is a result of a much slower dimerization reaction compared to aliphatic diazoacetates. Density functional theory calculations reveal that several reactions can take place with similar energy barriers, namely, dimerization of the NHPI diazoacetate, cyclopropanation (inner-sphere and outer-sphere), and a previously unrecognized migratory insertion of the carbene into the phenyloxazoline ligand. The calculations show that the migratory insertion reaction yields an unconsidered ruthenium complex that is catalytically competent for both the dimerization and cyclopropanation, and its relevance is assessed experimentally. The stereoselectivity of the reaction is argued to stem from an intricate balance between the various mechanistic scenarios.

Activation of Aryl Carboxylic Acids by Diboron Reagents towards Nickel-Catalyzed Direct Decarbonylative Borylation

The Ni-catalyzed decarbonylative borylation of (hetero)aryl carboxylic acids with B₂ cat₂ has been achieved without recourse to any additives. This Ni-catalyzed method exhibits a broad substrate scope covering poorly reactive non-ortho-substituted (hetero)aryl carboxylic acids, and tolerates diverse functional groups including some of the groups active to Ni⁰ catalysts. The key to achieve this decarbonylative borylation reaction is the choice of B₂ cat₂ as a coupling partner that not only acts as a borylating reagent, but also chemoselectively activates aryl carboxylic acids towards oxidative addition of their C(acyl)-O bond to Ni⁰ catalyst via the formation of acyloxyboron compounds. A combination of experimental and computational studies reveals a detailed plausible mechanism for this reaction system, which involves a hitherto unknown concerted decarbonylation and reductive elimination step that generates the aryl boronic ester product. This mode of boron-promoted carboxylic acid activation is also applicable to other types of reactions.

Metal-catalysed C-Het (F, O, S, N) and C-C bond arylation

The formation of C-aryl bonds has been the focus of intensive research over the last decades for the construction of complex molecules from simple, readily available feedstocks. Traditionally, these strategies involve the coupling of organohalides (I, Br, Cl) with organometallic reagents (Mg, Zn, B, Si, Sn,…) such as Kumada-Corriu, Negishi, Suzuki-Miyaura, Hiyama and Sonogashira cross-couplings. More recently, alternative methods have provided access to these products by reactions with less reactive C-Het (F, O, S, N) and C-C bonds. Compared to traditional methods, the direct cleavage and arylation of these chemical bonds, the essential link in accessible feedstocks, has become increasingly important from the viewpoint of step-economy and functional-group compatibility. This comprehensive review aims to outline the development and advances of this topic, which was organized into (1) C-F bond arylation, (2) C-O bond arylation, (3) C-S bond arylation, (4) C-N bond arylation, and (5) C-C bond arylation. Substantial attention has been paid to the strategies and mechanistic investigations. We hope that this review can trigger chemists to discover more efficient methodologies to access arylation products by cleavage of these C-Het and C-C bonds.

Nickel-Catalyzed Decarboxylative Cross-Coupling of Bicyclo[1.1.1]pentyl Radicals Enabled by Electron Donor-Acceptor Complex Photoactivation

The use of bicyclo[1.1.1]pentanes (BCPs) as para-disubstituted aryl bioisosteres has gained considerable momentum in drug development programs. Carbon-carbon bond formation via transition-metal-mediated cross-coupling represents an attractive strategy to generate BCP-aryl compounds for late-stage functionalization, but these typically require reactive organometallics to prepare BCP nucleophiles on demand from [1.1.1]propellane. In this study, the synthesis and Ni-catalyzed functionalization of BCP redox-active esters with (hetero)aryl bromides via the action of a photoactive electron donor-acceptor complex are reported.