Tunable Visible and Near Infrared Photoswitches

Reconfigurable Visible Light-Driven Liquid Crystalline Network Showing Off-Equilibrium Motions Enabled by Mesogen-Grafted Donor-Acceptor Stenhouse Adducts

Liquid crystalline network (LCN)-based soft actuators have opened up great opportunities to fabricate emerging and intriguing smart materials, serving as potential building blocks for intelligent soft robotics. Endowing LCN actuators with complex responsive behaviors to enhance their intelligence is both challenging and highly demanded. Herein, Donor-Acceptor Stenhouse Adducts (DASAs) molecules with rod-like mesogen and the polymerizable group are judiciously designed and synthesized, which is strong-colored at linear form and de-coloration at cyclic form after visible light. In the colored state, the DASA presents a striking photothermal effect that is capable of driving the motions of LCN film. Upon visible light irradiation, the DASA becomes colorless, making the diminishing photothermal effect. The light-gated switching of the photothermal effect renders the LCN films to be reconfigurable and perform off-equilibrium motions. The varying glass transition temperature of LCN matrix endowing tunable isomerization rates of DASAs and the equilibrium balance of photo- and thermal-isomerization at different temperatures in LCN-P-DASA film mainly guiding the off-equilibrium or stable motions, providing high adjustability of the novel visible light-driven LCN actuators. The multiply modulated LCN-P-DASA film holds great potential in constructing complex visible light-driven soft actuators based on the synergetic effect and interactions of photochemical and photothermal effects.

Merocyanines: Electronic Structure and Spectroscopy in Solutions, Solid State, and Gas Phase

Merocyanines, owing to their readily tunable electronic structure, are arguably the most versatile functional dyes, with ample opportunities for tailored design via variations of both the donor/acceptor (D/A) end groups and π-conjugated polymethine chain. A plethora of spectral properties, such as strong solvatochromism, high polarizability and hyperpolarizabilities, and sensitizing capacity, motivates extensive studies for their applications in light-converting materials for optoelectronics, nonlinear optics, optical storage, fluorescent probes, etc. Evidently, an understanding of the intrinsic structure-property relationships is a prerequisite for the successful design of functional dyes. For merocyanines, these regularities have been explored for over 70 years, but only in the past three decades have these studies expanded beyond the theory of their color and solvatochromism toward their electronic structure in the ground and excited states. This Review outlines the fundamental principles, essential for comprehension of the variable nature of merocyanines, with the main emphasis on understanding the impact of internal (chemical structure) and external (intermolecular interactions) factors on the electronic symmetry of the D-π-A chromophore. The research on the structure and properties of merocyanines in different media is reviewed in the context of interplay of the three virtual states: nonpolar polyene, ideal polymethine, and zwitterionic polyene.

Photoresponsive hydrogel friction

Photoresponsive hydrogels are an emerging class of stimuli-responsive materials that exhibit changes in physical or chemical properties in response to light. Previous investigations have leveraged photothermal mechanisms to achieve reversible changes in hydrogel friction, although few have focused on photochemical means. To date, the tribological properties of photoswitchable hydrogels (e.g., friction and lubrication) have remained underexplored. In this work, we incorporated photoresponsive methoxy-spiropyran-methacrylate monomers (methoxy-SP-MA) into a hydrogel network to form a copolymerized system of poly(N-isopropylacrylamide-co-2-acrylamido-2-methylpropane sulfonic acid-co-methoxy-spiropyran-methacrylate) (p(NIPAAm-co-AMPS-co-SP)). We demonstrated repeatable photoresponsive changes to swelling, friction, and stiffness over three light cycles. Our findings suggest that volume changes driven by the decreased hydrophilicity of the methoxy-SP-MA upon light irradiation are responsible for differences in the mechanical and tribological properties of our photoresponsive hydrogels. Our results could inform future designs of photoswitchable hydrogels for applications ranging from biomedical applications to soft robotics.

Bis-azopyrazole Photoswitches for Efficient Solar Light Harvesting

Although natural sunlight is one of the most abundant and sustainable energy resources, only a fraction of its energy is currently harnessed and utilized in photoactive systems. The development of molecular photoswitches that can be directly activated by sunlight is imperative for unlocking the full potential of solar energy and addressing the growing energy demands. Herein, we designed a series of 2-amino-1,3-bis-azopyrazoles featuring a coupled πn system, resulting in a pronounced redshift in their spectral absorption, reaching up to 661 nm in the red region. By varying the amino substituents of these molecules, highly efficient E→Z photoisomerization under unfiltered sunlight can be achieved, with yields of up to 88.4 %. Moreover, the Z,Z-isomers have high thermal stability with half-lives from days to years at room temperature. The introduction of ortho-amino substitutions and meta-bisazo units leads to a reversal of the n-π* and πn-π* transitions on the energy scale. This change provides a new perspective for further tuning the visible absorption of azo-switches by utilizing the πn-π* band instead of the conventional n-π* band. These results suggest that photoresponsive systems can be powered by sunlight instead of traditional artificial lights, thereby paving the way for sustainable smart materials and devices.

Photoactivation of Millimeters Thick Liquid Crystal Elastomers with Broadband Visible Light Using Donor-Acceptor Stenhouse Adducts

Light-responsive liquid crystal elastomers (LCEs) are stimuli-responsive materials that facilitate the conversion of light energy into a mechanical response. In this work, a novel polysiloxane-based LCE with donor-acceptor Stenhouse adduct (DASA) side-chains is synthesized using a late-stage functionalization strategy. It is demonstrated that this approach does not compromise the molecular alignment observed in the traditional Finkelmann method. This easy, single-batch process provides a robust platform to access well-aligned, light-responsive LCE films with thickness ranging from 400 µm to a 14-layer stack that is 5 mm thick. Upon irradiation with low-intensity broadband visible light (100-200 mW cm-2), these systems undergo 2D planar actuation and complete bleaching. Conversely, exposure to higher-intensity visible light induces bending followed by contraction (300 mW cm-2). These processes are repeatable over several cycles. Finally, it is demonstrated how light intensity and the resulting heat generation influences the photothermal stationary state equilibrium of DASA, thereby controlling its photoresponsive properties. This work establishes the groundwork for advancement of LCE-based actuators beyond thin film and UV-light reliant systems.

Detour to success: photoswitching via indirect excitation

Photoswitchable molecules that undergo nanoscopic changes upon photoisomerisation can be harnessed to control macroscopic properties such as colour, solubility, shape, and motion of the systems they are incorporated into. These molecules find applications in various fields of chemistry, physics, biology, and materials science. Until recently, research efforts have focused on the design of efficient photoswitches responsive to low-energy (red or near-infrared) irradiation, which however may compromise other molecular properties such as thermal stability and robustness. Indirect isomerisation methods enable photoisomerisation with low-energy photons without altering the photoswitch core, and also open up new avenues in controlling the thermal switching mechanism. In this perspective, we present the state of the art of five indirect excitation methods: two-photon excitation, triplet sensitisation, photon upconversion, photoinduced electron transfer, and indirect thermal methods. Each impacts our understanding of the fundamental physicochemical properties of photochemical switches, and offers unique application prospects in biomedical technologies and beyond.

Supramolecular assemblies of amphiphilic donor-acceptor Stenhouse adducts as macroscopic soft scaffolds

In the design of photoharvesting and photoresponsive supramolecular systems in aqueous medium, the fabrication of amphiphilic photoswitches enables a noninvasive functional response through photoirradiation. Although most aqueous supramolecular assemblies are driven by high-energy and biodamaging UV light, we have previously reported a design of amphiphilic donor-acceptor Stenhouse adducts (DASAs) controlled by white light. Herein, we present a series of DASA amphiphiles (DAs) with minor structural modifications on the alkyl linker chain length connecting the DASA motif with the hydrophilic moiety. The excellent photoswitchability in organic medium and the photoresponsiveness in aqueous medium, driven by visible light, were investigated by UV-vis absorption spectroscopy. The assembled supramolecular nanostructures were confirmed by electron microscopy, while the supramolecular packing was revealed by X-ray diffraction analysis. Upon visible-light irradiation, significant transformations of the DA geometry enabled transformations of the supramolecular assemblies on a microscopic scale, subsequently disassembling macroscopic soft scaffolds of DAs. The current work shows promising use for the fabrication of visible-light-controlled macroscopic scaffolds, offering the next generation of biomedical materials with visible-light-controlled microenvironments and future soft-robotic systems.

Development and characterization of amino donor-acceptor Stenhouse adducts

Donor-acceptor Stenhouse adducts (DASAs) are molecular photoswitches spurring wide interest because of their dynamic photophysical properties, complex photoswitching mechanism, and diverse applications. Despite breakthroughs in modularity for the donor, acceptor, and triene compartments, the backbone heteroatom remains static due to synthetic challenges. We provide a predictive tool and sought-after strategy to vary the heteroatom, introduce amino DASA photoswitches, and analyze backbone heteroatom effects on photophysical properties. Amino DASA synthesis is enabled by aza-Piancatelli rearrangements on pyrrole substrates, imparting an aromaticity-breaking rearrangement that capitalizes on nitrogen's additional bonding orbital and the inductive properties of sulfonyl groups. Amino DASA structure is confirmed by single crystal X-ray diffraction, the photochromic properties are characterized, and the photoswitch isomerization is investigated. Overall, the discovered pyrrole rearrangement enables the study of the DASA backbone heteroatom compartment and furthers our insight into the structure-property relationship of this complex photoswitch.

Robust Red-Absorbing Donor-Acceptor Stenhouse Adduct Photoswitches

Donor-Acceptor Stenhouse Adduct (DASA), a class of push-pull negative photochrome, has received large interest lately owing to its versatile synthesis, modularity and excellent photoswitching in solutions. From a technological perspective, it is imperative for this class of photoswitches to work robustly in solid state, e. g. thin films. We feature a molecular framework for the optimized design of DASAs by introducing a new thioindoline donor (D3) and assessing its performance against known 2nd generation indoline-based donors. The systematic structure-function investigations suggest that to achieve robust reversible photoswitching, a ground state with low charge separation is desired. DASAs with stronger electron donors and a larger charge separation in the ground state result in a low population of the photothermalstationary state (PTSS) and reduced photostability. The DASA with thioindoline donor (D3A3) seems to be a special case among the donor series as it causes a red shift (ca. 15 nm), however with less polarization of the ground state and marginally better photostability as compared to the unsubstituted 2-methyl indoline (D1A3). We also emphasize the consideration of the key additional factors that can modulate the red-light photoswitching properties of DASA chromophores in polymer thin films, which might not be dominant in homogenous solution state.

Gain of Function Recyclable Photoswitches: Reversible Simultaneous Substitution and Photochromism Generation

The use of molecular photoswitches has spread to virtually every field of pure and applied chemistry because of the extraordinary level of control they provide over the behavior of matter at the smallest scales. Photoswitches possess at least two different states with distinct structures and/or electronics and further functionalization of their core chromophore structures is needed to tailor them for a specific application. In this work we present a different concept for the generation and use of molecular photoswitches. It allows not only simultaneous establishment of photochromism and functionalization, but also full recyclability of a non-photochromic precursor material. Using a high-yielding and reversible ammonium salt formation, a functional group is introduced into a symmetric precursor while at the same time a strong electronic push-pull character is established in the structure. The resulting desymmetrization leads to efficient photoswitching capacity and the functional group can be fully removed subsequently by a simple heating step recovering the precursor for another functionalization round. We finally demonstrate feasibility of this concept over two consecutive closed loop functionalization/photoswitching/recovery steps. This concept offers great potential in any chemical research and application driven area but especially for the creation of responsive reprogrammable materials, no-background photoswitch labeling, and sustainable chemistry.

Dynamic effects on the nonlinear optical properties of donor acceptor stenhouse adducts: insights from combined MD + QM simulations

The second-order nonlinear optical (NLO) responses of a donor-acceptor stenhouse adduct (DASA) are investigated by using a computational approach combining molecular dynamics simulations and density functional theory (DFT) calculations. Specific force fields for the open and closed photoswitching forms are first parameterized and validated according to the Joyce protocol, in order to finely reproduce the geometrical features and potential energy surfaces of both isomers in chloroform solution. Then, DFT calculations are performed on structural snapshots extracted at regular time steps of the MD trajectories to address the influence of the thermalized conformational dynamics on the NLO responses related to hyper-Rayleigh scattering (HRS) experiments. We show that accounting for the structural dynamics largely enhances the HRS hyperpolarizability (βHRS) compared to DFT calculations considering solely equilibrium geometries, and greatly improves the agreement with experimental measurements. Furthermore, we show that the NLO responses of the NLO-active open form are correlated with the bond order alternation along the triene bridge connecting the donor and acceptor moieties, which is rationalized using simple essential state models.

Robust, Ultrafast and Reversible Photoswitching in Bulk Polymers Enabled by Octupolar Molecule Design

Improving the photoswitching rate and robustness of photochromic molecules in bulk solids is paramount for practical applications but remains an on-going challenge. Here, we introduce an octupolar design paradigm to develop a new family of visible light organic photoswitches, namely multi-branched octupolar Stenhouse Adducts (MOPSAs) featuring a C3-symmetrical A3-(D-core) architecture with a dipolar donor-acceptor (D-A) photochrome in each branch. Our design couples multi-dimensional geometric and electronic effects of MOPSAs to enable robust ultrafast reversible photoswitching in bulk polymers. Specifically, the optimal MOPSA (4 wt %) in commercial polyurethane films accomplishes nearly 100 % discoloration in 6 s under visible light with ∼ 100 % thermal-recovery in 17.4 s at 60 °C, while the acquired kinetics constants are 3∼7 times that of dipolar DASA counterpart and 1∼2 orders of magnitude higher than those of reported DASAs in polymers. Importantly, the MOPSA-doped polymer films sustain 500 discoloration/recovery cycles with slow degradation, superior to the existing DASAs in polymers (≤30 cycles). We discover that multi-dipolar coupling in MOPSA enables enhanced polarization and electron delocalization, promoting the rate-determining thermal cyclization, while the branched and non-planar geometry of MOPSA induces large free volume to facilitate the isomerization. This design can be extended to develop spiropyran or azobenzene-based ultrafast photochromic films. The superior photoswitching performance of MOPSAs together with their high-yield and scalable synthesis and facile film processing inspires us to explore their versatile uses as smart inks or labels for time-temperature indicators, optical logic encryption and multi-levelled data encryption.

Enlightening epigenetics: optochemical tools illuminate the path

Optochemical tools have become potent instruments for understanding biological processes at the molecular level, and the past decade has witnessed their use in epigenetics and epitranscriptomics (also known as RNA epigenetics) for deciphering gene expression regulation. By using photoresponsive molecules such as photoswitches and photocages, researchers can achieve precise control over when and where specific events occur. Therefore, these are invaluable for studying both histone and nucleotide modifications and exploring disease-related mechanisms. We systematically report and assess current examples in the field, and identify open challenges and future directions. These outstanding proof-of-concept investigations will inspire other chemical biologists to participate in these emerging fields given the potential of photochromic molecules in research and biomedicine.

Characteristics and long-term kinetics of an azobenzene derivative and a donor-acceptor Stenhouse adduct as orthogonal photoswitches

Light-triggered molecular switches are extensively researched for their applications in medicine, chemistry and material science and, if combined, particularly for their use in multifunctional smart materials, for which orthogonally, i.e. individually, addressable photoswitches are needed. In such a multifunctional mixture, the switching properties, efficiencies and the overall performance may be impaired by undesired mutual dependences of the photoswitches on each other. Within this study, we compare the performance of the pure photoswitches, namely an azobenzene derivative (Azo) and a donor-acceptor Stenhouse adduct (DASA), with the switching properties of their mixture using time-resolved temperature-dependent UV/VIS absorption spectroscopy, time-resolved IR absorption spectroscopy at room temperature and quantum mechanical calculations to determine effective cross sections, switching kinetics as well as activation energies of thermally induced steps. We find slightly improved effective cross sections, percentages of switched molecules and no increased activation barriers of the equimolar mixture compared to the single compounds. Thus, the studied mixture Azo + DASA is very promising for future applications in multifunctional smart materials.

Enriched switching in a donor-acceptor Stenhouse adduct via reversible covalent bonding

We have utilized reversible covalent bonding to expand the accessible states of a molecular switch. Introducing a hydroxyl group onto the donor moiety of a donor-acceptor Stenhouse adduct (DASA) imparts an acidity response by forming an oxazolidine ring through intramolecular nucleophilic addition. Furthermore, we observed distinct color changes under cryogenic conditions, extending the thermal responsiveness beyond the cyclization equilibrium observed at elevated temperatures. These unique responses present promising prospects for diverse applications compared to traditional photoinduced binary isomerization.

Photochemically Activated 3D Printing Inks: Current Status, Challenges, and Opportunities

3D printing with light is enabled by the photochemistry underpinning it. Without fine control over the ability to photochemically gate covalent bond formation by the light at a certain wavelength and intensity, advanced photoresists with functions spanning from on-demand degradability, adaptability, rapid printing speeds, and tailored functionality are impossible to design. Herein, recent advances in photoresist design for light-driven 3D printing applications are critically assessed, and an outlook of the outstanding challenges and opportunities is provided. This is achieved by classing the discussed photoresists in chemistries that function photoinitiator-free and those that require a photoinitiator to proceed. Such a taxonomy is based on the efficiency with which photons are able to generate covalent bonds, with each concept featuring distinct advantages and drawbacks.

From Visible to Near-Infrared Light-Triggered Photochromism: Negative Photochromism

Photochromic compounds, whose key molecular properties can be effectively modulated by light irradiation, have attracted significant attention for their potential applications in various research fields. The restriction of photoisomerization coloration induced by ultraviolet light limits their applications in the biomedical field and some other fields. Negative photochromism, wherein a relatively stable colored isomer transforms to a colorless metastable isomer under low-energy light irradiation, offers advantages in applications within materials science and life science. This review provides a summary of negatively photochromic compounds based on different molecular skeletons. Their corresponding design strategies and photochromic properties are presented to provide practical guidelines for future investigations. Negatively photochromic compounds can effectively expand the range of photochromic switches for future applications, offering unique properties such as responsiveness to visible to near-infrared light.

Visible light-responsive materials: the (photo)chemistry and applications of donor-acceptor Stenhouse adducts in polymer science

Donor-acceptor Stenhouse adduct (DASA) photoswitches have gained a lot of attention since their discovery in 2014. Their negative photochromism, visible light absorbance, synthetic tunability, and the large property changes between their photoisomers make them attractive candidates over other commonly used photoswitches for use in materials with responsive or adaptive properties. The development of such materials and their translation into advanced technologies continues to widely impact forefront materials research, and DASAs have thus attracted considerable interest in the field of visible-light responsive molecular switches and dynamic materials. Despite this interest, there have been challenges in understanding their complex behavior in the context of both small molecule studies and materials. Moreover, incorporation of DASAs into polymers can be challenging due to their incompatibility with the conditions for most common polymerization techniques. In this review, therefore, we examine and critically discuss the recent developments and challenges in the field of DASA-containing polymers, aiming at providing a better understanding of the interplay between the properties of both constituents (matrix and photoswitch). The first part summarizes current understanding of DASA design and switching properties. The second section discusses strategies of incorporation of DASAs into polymers, properties of DASA-containing materials, and methods for studying switching of DASAs in materials. We also discuss emerging applications for DASA photoswitches in polymeric materials, ranging from light-responsive drug delivery systems, to photothermal actuators, sensors and photoswitchable surfaces. Last, we summarize the current challenges in the field and venture on the steps required to explore novel systems and expand both the functional properties and the application opportunities of DASA-containing polymers.

Tethered together: DASA design towards aqueous compatibility

Donor-acceptor Stenhouse adducts (DASAs) are an exciting class of photoswitches due to their facile tunability, visible light absorbance, and negative photochromism. While they have shown use in a variety of applications, to date all reported DASA derivatives have low equilibrium and/or poor photoswitching in polar protic solvents, which is vital for moving towards applications in biological systems. We demonstrate a strategy to introduce a substitution on the DASA triene that results in derivatives that are stable and have high dark equilibrium of the open form in polar protic solvents. Decreasing the charge separation of these new derivatives also allows for reversible switching in polar and protic solvents including THF : water mixtures.

Breaking the photoswitch speed limit

The forthcoming generation of materials, including artificial muscles, recyclable and healable systems, photochromic heterogeneous catalysts, or tailorable supercapacitors, relies on the fundamental concept of rapid switching between two or more discrete forms in the solid state. Herein, we report a breakthrough in the "speed limit" of photochromic molecules on the example of sterically-demanding spiropyran derivatives through their integration within solvent-free confined space, allowing for engineering of the photoresponsive moiety environment and tailoring their photoisomerization rates. The presented conceptual approach realized through construction of the spiropyran environment results in ~1000 times switching enhancement even in the solid state compared to its behavior in solution, setting a record in the field of photochromic compounds. Moreover, integration of two distinct photochromic moieties in the same framework provided access to a dynamic range of rates as well as complementary switching in the material's optical profile, uncovering a previously inaccessible pathway for interstate rapid photoisomerization.

Two-photon isomerization properties of donor-acceptor Stenhouse adducts

Donor-acceptor Stenhouse adducts (DASAs) are important photo-responsive molecules that undergo electrocyclic reactions after light absorption. From these properties, DASAs have received extensive attention as photo-switches with negative photochromism. Meanwhile, several photochemical applications require isomerization events to take place in highly localized volumes at variable depths. Such focused photoreactions can be achieved if the electronic excitation is induced through a non-linear optical process. In this contribution we describe DASAs substituted with extended donor groups which provide them with significant two-photon absorption properties. We characterized the photo-induced transformation of these DASAs from the open polymethinic form to their cyclopentenic isomer with the use of 800 nm femtosecond pulses. These studies verified that the biphotonic excitation produces equivalent photoreactions as linear absorbance. We also determined these DASAs' two-photon absorption cross sections from measurements of their photoconverted yield after biphotonic excitation. As we show, specific donor sections provide these systems with important biphotonic cross-sections as high as 615 GM units. Such properties make these DASAs among the most non-linearly active photo-switchable molecules. Calculations at the TDDFT level with the optimally tuned range-separated functional OT-CAM-B3LYP, together with quadratic response methods indicate that the non-linear photochemical properties in these molecules involve higher lying electronic states above the first excited singlet. This result is consistent with the observed relation between their two-photon chemistry and the onset of their short wavelength absorption features around 400 nm. This is the first report of the non-linear photochemistry of DASAs. The two-photon isomerization properties of DASAs extend their applications to 3D-photocontrol, non-linear lithography, variable depth birefringence, and localized drug delivery schemes.

A Red-Light-Responsive DASA-Polymer with High Water Stability for Controlled Release

Photoresponsive polymers hold vast potential in the realm of drug delivery. Currently, most photoresponsive polymers use ultraviolet (UV) light as the excitation source. However, the limited penetration ability of UV light within biological tissues serves as a significant hindrance to their practical applications. Given the strong penetration ability of red light in biological tissues, the design and preparation of a novel red-light-responsive polymer with high water stability, incorporating the reversible photoswitching compound and donor-acceptor Stenhouse adducts (DASA) for controlled drug release is demonstrated. In aqueous solutions, this polymer exhibits self-assembly into micellar nanovectors (~33 nm hydrodynamic diameter), facilitating the encapsulation of the hydrophobic model drug Nile red (NR) within the micellar core. Upon irradiation by a 660 nm LED light source, photons are absorbed by DASA, leading to the disruption of the hydrophilic-hydrophobic balance of the nanovector and thereby resulting in the release of NR. This newly designed nanovector incorporates red light as a responsive switch, successfully avoiding the problems of photodamage and limited penetration of UV light within biological tissues, thereby further promoting the practical applications of photoresponsive polymer nanomedicines.

Nonlinear Optical Responses of Photoswitchable Donor-Acceptor Stenhouse Adducts

This work combines hyper-Rayleigh scattering (HRS) experiments performed in the NIR range (1.30 and 1.60 μm) and quantum chemical calculations to provide a comprehensive description of the second harmonic generation (SHG) responses of donor-acceptor Stenhouse adducts (DASAs). Representative derivatives of the three generations of DASAs, which differ by the nature of their electron-donating and withdrawing moieties and also include clickable species, have been synthesized and their photoswitching behavior fully characterized. The HRS measurements allow us to establish relationships between the magnitude of the SHG response of open forms and the nature of the donor and acceptor groups. The largest SHG responses are obtained for derivatives incorporating either a barbituric acid or an indanedione acceptor unit, while N-methylaniline appears as the most efficient donor group. The calculations support well the experimental data and show that high hyperpolarizabilities are associated to low excitation energies and large extent of the photoinduced intramolecular charge transfer, which enhances the dipole moment variation between the ground and first dipole-allowed electronic excited state. In addition, a complete investigation of the photoswitching kinetics of DASAs in chloroform solution shows important differences, highlighting in particular the role of the donor group on the photoswitching efficiency.

Controlling Isomerization of Photoswitches to Modulate 2D Logic-in-Memory Devices by Organic-Inorganic Interfacial Strategy

Logic-in-memory devices are a promising and powerful approach to realize data processing and storage driven by electrical bias. Here, an innovative strategy is reported to achieve the multistage photomodulation of 2D logic-in-memory devices, which is realized by controlling the photoisomerization of donor-acceptor Stenhouse adducts (DASAs) on the surface of graphene. Alkyl chains with various carbon spacer lengths (n = 1, 5, 11, and 17) are introduced onto DASAs to optimize the organic-inorganic interfaces: 1) Prolonging the carbon spacers weakens the intermolecular aggregation and promotes isomerization in the solid state. 2) Too long alkyl chains induce crystallization on the surface and hinder the photoisomerization. Density functional theory calculation indicates that the photoisomerization of DASAs on the graphene surface is thermodynamically promoted by increasing the carbon spacer lengths. The 2D logic-in-memory devices are fabricated by assembling DASAs onto the surface. Green light irradiation increases the drain-source current (I_ds ) of the devices, while heat triggers a reversed transfer. The multistage photomodulation is achieved by well-controlling the irradiation time and intensity. The strategy based on the dynamic control of 2D electronics by light integrates molecular programmability into the next generation of nanoelectronics.

Exploration of molecular machines in supramolecular soft robotic systems

Soft robotic system, a new era of material science, is rapidly developing with advanced processing technology in soft matters, featured with biomimetic nature. An important bottom-up approach is through the implementation of molecular machines into polymeric materials, however, the synchronized molecular motions, acumination of strain across multiple length-scales, and amplification into macroscopic actuations remained highly challenging. This review presents the significances, key design strategies, and outlook of the hierarchical supramolecular systems of molecular machines to develop novel types of supramolecular-based soft robotic systems.

Red-light photoswitching of indigos in polymer thin films

Through simple synthetic derivatisation, the parent indigo dye becomes a red-light E-Z photoswitch exhibiting negative photochromism and tuneable thermal isomerisation kinetics. These attributes make indigo derivatives extremely attractive for applications related to materials and living systems. However, there is a lack of knowledge in translating indigo photoswitching dynamics from solution to solid state - the environment crucial for most applications. Herein, we study the photoswitching performance of six structurally distinct indigo derivatives in five polymers of varying rigidity. Three key strategies are identified to enable efficient photoswitching under red (660 nm) light: (i) choosing a soft polymer matrix to minimise its resistance toward the isomerisation, (ii) creating free volume around the indigo molecules through synthetic modifications, and (iii) applying low dye loading (<1% w/w) to inhibit aggregation. These strategies are shown to improve both photostationary state distributions and the thermal stability of the Z isomer. When all three strategies are implemented, the isomerisation performance (>80% Z form in the photostationary state) is nearly identical to that in solution. These findings thus pave the way for designing new red-light photochromic materials based on indigos.

Revisiting photocyclization of the donor-acceptor stenhouse adduct: missing pieces in the mechanistic jigsaw discovered

Donor-acceptor Stenhouse adducts (DASA) have recently emerged as a class of visible-light-induced photochromic molecular switches, but their photocyclization mechanism remains puzzling and incomplete. In this work, we carried out MS-CASPT2//SA-CASSCF calculations to reveal the complete mechanism of the dominant channels and possible side reactions. We found that a new thermal-then-photo isomerization channel, i.e., EEZ → EZZ → EZE, other than the commonly accepted EEZ → EEE → EZE channel, is dominant in the initial step. Besides, our calculations rationalized why the expected byproducts ZEZ and ZEE are unobserved and proposed a competitive stepwise channel for the final ring-closure step. The findings here redraw the mechanistic picture of the DASA reaction by better accounting for experimental observations, and more importantly, provide critical physical insight in understanding the interplay between thermal- and photo-induced processes widely present in photochemical synthesis and reactions.

Acceleration of the thermal back-reaction and the finding of a non-photochromic isomer for a negative photochromic binaphthyl-bridged imidazole dimer

The development of visible or near-infrared (NIR) light-responsive fast photoswitchable molecules for the real-time, non-contact control of physical and chemical properties has received increased attention because of the non-invasive features to materials and biological tissues. We report a new molecular design to accelerate the thermal back-reaction of the negative photochromic binaphthyl-bridged imidazole dimer, BN-ImD. We also found that irradiation of the BN-ImD derivative with methyl groups on the bridging binaphthyl unit with visible light produced an unprecedented photoreaction product with a unique eight-membered ring structure. These observations provide fascinating clues for the future development of fast negative photochromic molecules.

Negative Photochromic 3-Phenylperylenyl-Bridged Imidazole Dimer Offering Quantitative and Selective Bidirectional Photoisomerization with Visible and Near-Infrared Light

Selective bidirectional photoisomerization reactions with high conversion ratios between stable and metastable isomers by irradiation of photochromic molecules with visible light of different wavelengths have been an important issue for many years. For negative photochromic molecules known so far, metastable isomers also absorb UV or visible light in the same region as stable isomers, making it difficult to selectively achieve the reverse reaction by visible-light irradiation. We have demonstrated that the absorption bands of the stable and metastable isomers of 3-phenylperylenyl-bridged imidazole dimer are largely separated by more than 140 nm and that almost quantitative and selective bidirectional photoconversion can be achieved by 660 and 460 nm light. Furthermore, the forward reaction can be achieved completely with near-infrared light of 785 nm.

Heterocyclic Hemipiperazines: Water-Compatible Peptide-Derived Photoswitches

Hemipiperazines are a recently discovered class of peptide-derived molecular photoswitches with high biocompatibility and therapeutic potential. Here, for the first time we describe photochromism of heterocyclic hemipiperazines. They demonstrate long thermal lifetimes, and enlarged band separation between photoisomers. Efficient photoisomerization occurs under aqueous conditions, although with a need for organic co-solvent. Bidirectional switching with visible light is observed for an extended aromatic system.

Bioconjugation of Meldrum's acid activated furan: A detergent compatible assay for protein quantitation

A simple yet efficient assay for the quantitation of proteins ranging from plasma proteins to purified proteins from whole cell lysate, based on the bioconjugation reaction between protein and Meldrum's acid Activated Furan (MAF) is described. This easy to use, sensitive method is based on the conjugation of amine functionalities present on the protein with MAF to form the corresponding Donor Acceptor Stenhouse Adducts (DASAs) with characteristic absorption in the visible region. The reaction is rapid as well as reproducible and shows a proportionate increase in color change over a broad range of protein concentration. The assay was found to be sensitive up to 0.125 mg/mL concentration of the protein and was compatible with most of the commonly employed detergents and isolation protocols which makes it ideal for the estimation of protein samples containing detergents. Another striking feature of this protocol is its tolerance towards other major interference contributors such as chelating agents, reducing agents, carbohydrates and protease inhibitors.

Photoswitchable gating of non-equilibrium enzymatic feedback in chemically communicating polymersome nanoreactors

The circadian rhythm generates out-of-equilibrium metabolite oscillations that are controlled by feedback loops under light/dark cycles. Here we describe a non-equilibrium nanosystem comprising a binary population of enzyme-containing polymersomes capable of light-gated chemical communication, controllable feedback and coupling to macroscopic oscillations. The populations consist of esterase-containing polymersomes functionalized with photo-responsive donor-acceptor Stenhouse adducts (DASA) and light-insensitive semipermeable urease-loaded polymersomes. The DASA-polymersome membrane becomes permeable under green light, switching on esterase activity and decreasing the pH, which in turn initiates the production of alkali in the urease-containing population. A pH-sensitive pigment that absorbs green light when protonated provides a negative feedback loop for deactivating the DASA-polymersomes. Simultaneously, increased alkali production deprotonates the pigment, reactivating esterase activity by opening the membrane gate. We utilize light-mediated fluctuations of pH to perform non-equilibrium communication between the nanoreactors and use the feedback loops to induce work as chemomechanical swelling/deswelling oscillations in a crosslinked hydrogel. We envision possible applications in artificial organelles, protocells and soft robotics.

Spatiotemporal Control of Biology: Synthetic Photochemistry Toolbox with Far-Red and Near-Infrared Light

The complex network of naturally occurring biological pathways motivates the development of new synthetic molecules to perturb and/or detect these processes for fundamental research and clinical applications. In this context, photochemical tools have emerged as an approach to control the activity of drug or probe molecules at high temporal and spatial resolutions. Traditional photochemical tools, particularly photolabile protecting groups (photocages) and photoswitches, rely on high-energy UV light that is only applicable to cells or transparent model animals. More recently, such designs have evolved into the visible and near-infrared regions with deeper tissue penetration, enabling photocontrol to study biology in tissue and model animal contexts. This Review highlights recent developments in synthetic far-red and near-infrared photocages and photoswitches and their current and potential applications at the interface of chemistry and biology.

Harnessing molecular isomerization in polymer gels for sequential logic encryption and anticounterfeiting

Using smart photochromic and luminescent tissues in camouflage/cloaking of natural creatures has inspired efforts to develop synthetic stimuli-responsive materials for data encryption and anticounterfeiting. Although many optical data-encryption materials have been reported, they generally require only one or a simple combination of few stimuli for decryptions and rarely offer output corruptibility that prevents trial-and-error attacks. Here, we report a series of multiresponsive donor-acceptor Stenhouse adducts (DASAs) with unprecedented switching behavior and controlled reversibility via diamine conformational locking and substrate free-volume engineering and their capability of sequential logic encryption (SLE). Being analogous to the digital circuits, the output of DASA gel-based data-encryption system depends not only on the present input stimulus but also on the sequence of past inputs. Incorrect inputs/sequences generate substantial fake information and lead attackers to the point of no return. This work offers new design concepts for advanced data-encryption materials that operate via SLE, paving the path toward advanced encryptions beyond digital circuit approaches.

Enhanced Sampling Aided Design of Molecular Photoswitches

Advances in the evolving field of atomistic simulations promise important insights for the design and fundamental understanding of novel molecular photoswitches. Here, we use state-of-the-art enhanced simulation techniques to unravel the complex, multistep chemistry of donor-acceptor Stenhouse adducts (DASAs). Our reaction discovery workflow consists of enhanced sampling for efficient chemical space exploration, refinement of newly observed pathways with more accurate ab initio electronic structure calculations, and structural modifications to introduce design principles within future generations of DASAs. We showcase our discovery workflow by not only recovering the full photoswitching mechanism of DASA but also predicting a plethora of new plausible thermal pathways and suggesting a way for their experimental validation. Furthermore, we illustrate the tunability of these newly discovered reactions, leading to a potential avenue for controlling DASA dynamics through multiple external stimuli. Overall, these insights could offer alternative routes to increase the efficiency and control of DASA's photoswitching mechanism, providing new elements to design more complex light-responsive materials.

Donor-Acceptor Stenhouse Adduct Displaying Reversible Photoswitching in Water and Neuronal Activity

The interest in the photochromism and functional applications of donor-acceptor Stenhouse adducts (DASAs) soared in recent years owing to their outstanding advantages and flexible design. However, their low solubility and irreversible conversion in aqueous solutions hampered exploring DASAs for biology and medicine. It is notably unknown whether the barbiturate electron acceptor group retains the pharmacological activity of drugs such as phenobarbital, which targets γ-aminobutyric acid (GABA)-type A receptors (GABA_ARs) in the brain. Here, we have developed the model compound DASA-barbital based on a scaffold of red-switching second-generation DASAs, and we demonstrate that it is active in GABA_ARs and alters the neuronal firing rate in a physiological medium at neutral pH. DASA-barbital can also be reversibly photoswitched in acidic aqueous solutions using cyclodextrin, an approved ingredient of drug formulations. These findings clarify the path toward the biological applications of DASAs and to exploit the versatility displayed in polymers and materials science.

Acidochromism of donor-acceptor Stenhouse adducts in organic solvent

First generation DASA derivatives can be reversibly isomerized from the coloured, open form to the colourless, closed isomer upon protonation, thus behaving as acidochromic compounds in halogenated organic solvent.

Visible-light controlled supramolecular transformations of donor-acceptor Stenhouse adducts amphiphiles at multiple length-scale

Designing responsive, adaptive, and dynamic supramolecular systems in water, the incorporation of photoresponsive units in amphiphilic molecular structures enables functional responses in a non-invasive way by using light. However, in aqueous media, vast majority of reported synthetic photoresponsive molecular amphiphiles are commonly driven by high energy and bio-damaging UV-light for supramolecular transformation at multiple length-scale. Herein, we present newly designed visible-light controlled supramolecular assembly of donor-acceptor Stenhouse adducts amphiphiles (DA) with excellent stability and solubility in aqueous media. The excellent photoswitchability in organic media and photoresponsiveness in aqueous media driven by visible-light are found, as confirmed with UV-vis absorption and NMR spectroscopies. Supramolecular assembly at multiple length-scale of DAs is investigated with electron microscopies and X-ray diffraction to show large aspect-ratio of nanostructures assembled into macroscopic soft scaffolds. Upon visible-light irradiation, the large geometrical transformation of DAs enables supramolecular transformations, and subsequently destabilizes the macroscopic soft scaffold to release fluorophores from the scaffolds. These results provide the feasibility in developing the next generation of visible-light controlled macroscopic soft functional scaffold from supramolecular assembly across multiple length-scale without and offer ample opportunity to design future soft robotic materials and functional biomaterials.

Stepping Out of the Blue: From Visible to Near-IR Triggered Photoswitches

Light offers unique opportunities for controlling the activity of materials and biosystems with high spatiotemporal resolution. Molecular photoswitches are chromophores that undergo reversible isomerization between different states upon irradiation with light, allowing a convenient means to control their influence over the system of interest. However, a significant limitation of classical photoswitches is the requirement to initiate the switching in one or both directions using deleterious UV light with poor tissue penetration. Red-shifted photoswitches are hence in high demand and have attracted keen recent research interest. In this Review, we highlight recent progress towards the development of visible- and NIR-activated photoswitches characterized by distinct photochromic reaction mechanisms. We hope to inspire further endeavors in this field, allowing the full potential of these tools in biotechnology and materials chemistry applications to be realized.

Mechanism of the Aza-Piancatelli Reaction: Scope and Limitations of Furan Substitution in Donor-Acceptor Stenhouse Adduct Synthesis

The aza-Piancatelli reaction has been widely used to synthesize donor-acceptor Stenhouse adducts (DASAs), a new class of molecular photoswitches with unique properties. However, the substitution pattern of furan cores has been limited to position 3, as 3,4-disubstituted furans remain unreactive. Herein, we explore the aza-Piancatelli reaction mechanism using density functional theory (DFT) calculations to understand the influence of the different substituents on the reactivity. We found that all the reaction pathways are kinetically accessible, but the driving force of the reaction is lost in disubstituted furans due to the loss of conjugation in the DASA products. Finally, a simple model is proposed to guide the design of synthetic routes using this reaction.

A multi-stage single photochrome system for controlled photoswitching responses

The ability of molecular photoswitches to convert on/off responses into large macroscale property change is fundamental to light-responsive materials. However, moving beyond simple binary responses necessitates the introduction of new elements that control the chemistry of the photoswitching process at the molecular scale. To achieve this goal, we designed, synthesized and developed a single photochrome, based on a modified donor-acceptor Stenhouse adduct (DASA), capable of independently addressing multiple molecular states. The multi-stage photoswitch enables complex switching phenomena. To demonstrate this, we show spatial control of the transformation of a three-stage photoswitch by tuning the population of intermediates along the multi-step reaction pathway of the DASAs without interfering with either the first or final stage. This allows for a photonic three-stage logic gate where the secondary wavelength solely negates the input of the primary wavelength. These results provide a new strategy to move beyond traditional on/off binary photochromic systems and enable the design of future molecular logic systems.

Recent Trends in Advanced Photoinitiators for Vat Photopolymerization 3D Printing

3D printing has revolutionized the way of manufacturing with a huge impact on various fields, in particular biomedicine. Vat photopolymerization-based 3D printing techniques such as stereolithography (SLA) and digital light processing (DLP) attracted considerable attention owing to their superior print resolution, relatively high speed, low cost and flexibility in resin material design. As one key element of the SLA/DLP resin, photoinitiators or photoinitiating systems have experienced significant development in recent years, in parallel with the exploration of 3D printing (macro)monomers. The design of new photoinitiating systems can not only offer faster 3D printing speed and enable low-energy visible light fabrication, but also can bring new functions to the 3D printed products and even generate new printing methods in combination with advanced optics. This review evaluates recent trends in the development and application of advanced photoinitiators and photoinitiating systems for vat photopolymerization 3D printing, with a wide range of small molecules, polymers and nanoassemblies involved. Personal perspectives on the current limitations and future directions are eventually provided. This article is protected by copyright. All rights reserved.

Unexpected Acid-Triggered Formation of Reversibly Photoswitchable Stenhouse Salts from Donor-Acceptor Stenhouse Adducts

Donor-acceptor Stenhouse adducts (DASAs) are reversibly photoswitchable dyes, which are able to interconvert between a red/NIR absorbing triene-like state and a colorless cyclic state. Although optically attractive for multiple applications, their low solubility and lack of photoswitching in water impede their use in aqueous environments. We developed water-soluble DASAs based on indoline as donor and methyl, or trifluoromethyl, pyrazolone-based acceptors. In acetonitrile, photophysical analysis and photochemical studies, accounted with a three-state kinetic model, confirmed the reversible photoswitching mechanism previously proposed. In water, the colorless cyclic state is a thermodynamic sink at neutral pH values. In contrast, in acidic conditions, we observed a fast scrambling of DASAs' end-group resulting in the in situ formation of Stenhouse salts (StS), which are in turn capable of reversible photoswitching. We believe that this unexpected result is of interest not only for the future design of DASAs with improved stability, but also for further development and applications of StS as photoswitchable probes.

Wavelength Orthogonal Photodynamic Networks

The ability of light to remotely control the properties of soft matter materials in a dynamic fashion has fascinated material scientists and photochemists for decades. However, only recently has our ability to map photochemical reactivity in a finely wavelength resolved fashion allowed for different colors of light to independently control the material properties of polymer networks with high precision, driven by monochromatic irradiation enabling orthogonal reaction control. The current concept article highlights the progress in visible light‐induced photochemistry and explores how it has enabled the design of polymer networks with dynamically adjustable properties. We will explore current applications ranging from dynamic hydrogel design to the light‐driven adaptation of 3D printed structures on the macro‐ and micro‐scale. While the alternation of mechanical properties via remote control is largely reality for soft matter materials, we herein propose the next frontiers for adaptive properties, including remote switching between conductive and non‐conductive properties, hydrophobic and hydrophilic surfaces, fluorescent or non‐fluorescent, and cell adhesive vs. cell repellent properties.

Fabricating and Modulating Robust Multi-Photoaddressable Systems with the Derivatives of Diarylethylene and Donor-Acceptor Stenhouse Adducts

Multi-photoaddressable systems (MPSs) belong to complex systems, which are comprised of more than one photoswitching molecule and can respond to different wavelengths of light simultaneously. While MPSs have been extensively applied in various fields, there are also some challenges, such as the deficiency of the wavelength-selective control and the interference from the poor thermodynamic stability of used photoswitching molecules. Herein, we reported two robust MPSs (MPS1/2) consisting of diarylethylene derivative (DAE) and different donor-acceptor Stenhouse adducts (DASAs), in which both opened and closed forms of DAE and opened forms of DASAs are thermodynamically stable. MPS1/2 enable fully reversible cyclic photoswitching with improved thermal interference resistance. Moreover, MPS2 also shows a favorable property in PMMA films and has been applied in multicolor display. It is expected that the prepared MPSs could be used in more fields such as information storage and reading and encoding light.

Controlling the Isomerization of Photoresponsive Molecules through a Limiting Tautomerization Strategy

Controlling the multistage photoresponsivity remains a challenge, in part, due to the spontaneous tautomerization between isomers. Herein, we present a strategy to access three independent states (linear, cyclic keto, and cyclic enolate) of crown ether (CE)-substituted donor-acceptor Stenhouse adducts (DASAs) by limiting the tautomerization of the closed isomers. The linear-cyclic keto isomerization is reversibly triggered by treatment with metal ions (Na⁺ or K⁺) and CE, while the linear-cyclic enolate isomerization is induced by green light and heat. Density functional theory and molecular dynamics calculation results suggest that the steric effect and supramolecular interaction between the electron-donating and electron-withdrawing moieties play an important role in hindering the tautomerization between cyclic keto and cyclic enolate DASA-CE. The strategy to influence key steps in the photoswitching process inspires well-controlled multistage isomerization of photoresponsive molecules.

Engineering Photomechanical Molecular Crystals to Achieve Extraordinary Expansion Based on Solid-State [2 + 2] Photocycloaddition

Photomechanical molecular crystals are promising candidates for photoactuators and can potentially be implemented as smart materials in various fields. Here, we synthesized a new molecular crystal, (E)-3-(naphthalen-1-yl)acrylaldehyde malononitrile ((E)-NAAM), that can undergo a solid-state [2 + 2] photocycloaddition reaction under visible light (≥400 nm) illumination. (E)-NAAM microcrystals containing symmetric twinned sealed cavities were prepared using a surfactant-mediated crystal seeded growth method. When exposed to light, the hollow microcrystals exhibited robust photomechanical motions, including bending and dramatic directional expansion of up to 43.1% elongation of the original crystal length before fragmentation due to the photosalient effect. The sealed cavities inside the microcrystals could store different aqueous dye solutions for approximately one month and release the solutions instantly upon light irradiation. A unique slow-fast-slow crystal elongation kinematic process was observed, suggesting significant molecular rearrangements during the illumination period, leading to an average anisotropic crystal elongation of 37.0% (±3.8%). The significant molecular structure and geometry changes accompanying the photocycloaddition reaction, which propels photochemistry to nearly 100% completion, also facilitate photomechanical crystal expansion. Our results provide a possible way to rationally design molecular structures and engineer crystal morphologies to promote more interesting photomechanical behaviors.

Donor-Acceptor Stenhouse Adduct-Polydimethylsiloxane-Conjugates for Enhanced Photoswitching in Bulk Polymers

Donor-acceptor Stenhouse adducts (DASAs) are a rapidly emerging class of visible light-activated photochromes and DASA-functionalized polymers hold great promise as biocompatible photoresponsive materials. However, the photoswitching performance of DASAs in solid polymer matrices is often low, particularly in polymeric materials below their glass transition temperature. To overcome this limitation, DASAs are conjugated to polydimethylsiloxanes which have a glass transition temperature far below room temperature and which can create a mobile molecular environment around the DASAs for achieving more solution-like photoswitching kinetics in bulk polymers. The dispersion of DASAs conjugated to such flexible oligomers into solid polymer matrices allows for more effective and tunable DASA photoswitching in stiff polymers, such as poly(methyl methacrylate), without requiring modifications of the matrix. The photoswitching of conjugates with varying polymer molecular weight, linker type and architecture is characterized via time-dependent UV-Vis spectroscopy in organic solvents and blended into polymethacrylate films. In addition, DASA-functionalized polydimethylsiloxane networks that are accessible by the same synthetic route provide an alternative solution for achieving fast and efficient DASA photoswitching in the bulk owing to their intrinsic softness and flexibility. These findings may contribute to the development of DASA-functionalized materials with better tunable, more effective, and more reversible modulation of their optical properties. This article is protected by copyright. All rights reserved.