General and Direct Method for Preparing Oligonucleotide-Functionalized Metal-Organic Framework Nanoparticles

A phosphorylated guanidine chitosan and UiO-66-NH2 modified magnetic nanoparticle platform for enrichment and detection of multiple bacteria

Wastewater-based epidemiology (WBE) is a powerful tool for early warning of infectious disease outbreaks. Hence, a rapid and portable pathogen monitoring system is urgent needed for on-site detection. In this work, we first reported synthesis of an artificial modulated wide-spectrum bacteria capture nanoparticle (Arg-CSP@UiO@Fe3O4). Arginine-modified phosphorylated chitosan (Arg-CSP) coating could provide strongly positive charged guanidinium group for pathogen interaction by electrostatic attraction, and UiO-66-NH2 layer could help Arg-CSP graft onto Fe3O4 magnetic particles. The capture efficiency of Arg-CSP@UiO@Fe3O4 reached 92.2 % and 97.3 % for Escherichia coli (E.coli) and Staphylococcus epidermidis (S.epidermidis)within 40 min, in 10 mL sample. To prevent pathogen degradation in sewage, a portable nucleic acid extraction-free method was also developed. UiO-66-NH2 could disintegrate in buffer with high concentration of PO43- for bacterium desorption, and then nucleic acid of the bacteria was released by heating. The DNA template concentration obtained by this method was 779.28 times higher than that of the direct thermal lysis product and 8.63 times higher than that of the commercial kit. Afterwards, multiple detection of bacteria was realized by loop-mediated isothermal amplification (LAMP). Artificial regulated pathogen desorption could prevent non-specific adsorption of nucleic acid by nanoparticles. The detection limit of Arg-CSP@UiO@Fe3O4-LAMP method was 80 cfu/mL for E.coli and 300 cfu/mL for S.epidermidis. The accuracy and reliability of the method was validated by spiked sewage samples. In conclusion, this bio-monitoring system was able to detect multiple bacteria in environment conveniently and have good potential to become an alternative solution for rapid on-site pathogen detection.

From Structure to Application: The Evolutionary Trajectory of Spherical Nucleic Acids

Since the proposal of the concept of spherical nucleic acids (SNAs) in 1996, numerous studies have focused on this topic and have achieved great advances. As a new delivery system for nucleic acids, SNAs have advantages over conventional deoxyribonucleic acid (DNA) nanostructures, including independence from transfection reagents, tolerance to nucleases, and lower immune reactions. The flexible structure of SNAs proves that various inorganic or organic materials can be used as the core, and different types of nucleic acids can be conjugated to realize diverse functions and achieve surprising and exciting outcomes. The special DNA nanostructures have been employed for immunomodulation, gene regulation, drug delivery, biosensing, and bioimaging. Despite the lack of rational design strategies, potential cytotoxicity, and structural defects of this technology, various successful examples demonstrate the bright and convincing future of SNAs in fields such as new materials, clinical practice, and pharmacy.

Principal component analysis-assisted zirconium-based metal-organic frameworks/DNA biosensor for the analysis of various phosphates

Considering the diversity of phosphates and their pivotal roles in physiological processes, detection of various phosphates related to their metabolism is urgent but challenging. Herein, we design a biosensor with zirconium-based MOFs (Zr-MOFs) and fluorophore-modified single-stranded DNA (F-ssDNA) for the analysis of phosphates. Relying on the interaction between Zr clusters and phosphate backbone, F-ssDNA is anchored on the surface of Zr-MOFs, inducing fluorescence resonance energy transfer (FRET) and subsequently quenching the fluorescence of F-ssDNA. Meanwhile, phosphates with different numbers of phosphate groups, molecular structures and coordination environments are able to adjust the FRET between Zr-MOFs and F-ssDNA via a site-occupying effect, recovering the fluorescence of F-ssDNA in distinct cases, which may result in diverse fluorescence signals. Consequently, seventeen phosphates and four phosphate mixtures are discriminated with the assistance of principal component analysis. These results provide new insight into the application of Zr-MOFs and broaden the path for the development of analytical methods for phosphates.

Bifunctional MNPs@UIO-66-Arg core-shell-satellite nanocomposites for enrichment of phosphopeptides

A facile and mild method based on self-assembled lysozyme (LYZ) to fabricate bifunctional MNPs@UIO-66-Arg core-shell-satellite nanocomposites (CSSNCs) is reported for the high-efficiency enrichment of phosphopeptides. Under physiological conditions, LYZ rapidly self-assembled into a robust coating on Fe3O4@SiO2 magnetic nanoparticles (MNPs) with abundant surface functional groups, which effectively mediate heterogeneous nucleation and growth of UIO-66 nanocrystals. Well-defined MNPs@UIO-66 CSSNCs with stacked pores, showing high specific surface area (333.65 m2 g- 1) and low mass transfer resistance, were successfully fabricated by fine-tuning of the reaction conditions including reaction time and acetic acid content. Furthermore, the UIO-66 shells were further modified with arginine to obtain bifunctional MNPs@UIO-66-Arg CSSNCs. Thanks to the unique morphology and synergistic effect of Zr-O clusters and guanidine groups, the bifunctional MNPs@UIO-66-Arg CSSNCs exhibited outstanding enrichment performance for phosphopeptides, delivering a low limit of detection (0.1 fmol), high selectivity (β-casein/BSA, mass ratio 1:2000), and good capture capacity (120 mg g- 1). The mechanism for phosphopeptides capture may attribute to the hydrogen bonds, electrostatic interactions, and Zr-O-P bonds between phosphate groups in peptides and guanidyl/Zr-O clusters on bifunctional MNPs@UIO-66-Arg CSSNCs. In addition, the small stacking pores on the core-shell-satellite architecture may selectively capture phosphopeptides with low molecular weight, eliminating interference of other large molecular proteins in complex biological samples.

A bimetallic organic framework based fluorescent aptamer probe for the detection of zearalenone in cereals

In this work, a bimetallic organic framework (Cu/UiO-66) based "turn on" fluorescent aptamer probe was designed for the high-efficiency detection of zearalenone (ZEN). In the probe, the 6-carboxyfluorescein-labeled aptamer (FAM-Apt) was used as the recognition element, and the electrostatic interaction, coordination effect, and photoinduced electron transfer effect between FAM-Apt and Cu/UiO-66 caused fluorescence quenching. When ZEN existed, FAM-Apt recognized ZEN specifically, causing FAM-Apt to separate from the surface of Cu/UiO-66 and recovery of fluorescence. Under the optimal conditions, the probe had a linear detection range of 0.5 ng/mL-60 ng/mL, and the detection limit was 0.048 ng/mL. The application potential of the probe was verified by real detection of various cereals and their products, with a standard recovery from 83.67 %-106.8 %. The development of this efficient, rapid, and sensitive ZEN detection method provides a new platform for the quality control of cereals and their products.

Exosome-tuned MOF signal amplifier boosting tumor exosome phenotyping with high-affinity nanostars

The natural phospholipid structure imparts exosomes with not only cargo protection, but rich sites for coordination with metal-organic frameworks (MOFs) to assemble functional nanocomplexes, such as signal amplifiers. Here, we exploit exosomes to tune MOF signal amplifiers (Exo-MOF) for ultrasensitive phenotyping of tumor-derived exosomes (tExo) based on self-driven coordination assembly and high-affinity nanostars. Exo-MOF leverages the specific coordination interaction between exosome and MOF that cages abundant redox molecules to assemble a super-redox signal amplifier. Moreover, the dispersed immuno-magnetic nanostars, which are assembled with antibodies on the surface of Au nanostars-coated magnetic nanoparticles, allow for rapid capturing of target tExo, addressing the limited mass transfer on electrode surface. Both Exo-MOF and high-affinity nanostars orchestrate the ultrahigh sensitivity (1 particle per 100 μL, higher than that no Exo-MOF by at least 10-fold), specificity and speed of the sensor in tExo detection. Such a sensitive strategy allows profiling tExo across seven cancer types, and revealing the distinct exosomal surface expression patterns. Further, the Exo-MOF sensor accurately distinguishes cancer patients from healthy individuals in a clinical cohort, and provides new opportunities for functional materials assembly and precision diagnostics.

DNA-functionalized metal or metal-containing nanoparticles for biological applications

The conjugation of DNA molecules with metal or metal-containing nanoparticles (M/MC NPs) has resulted in a number of new hybrid materials, enabling a diverse range of novel biological applications in nanomaterial assembly, biosensor development, and drug/gene delivery. In such materials, the molecular recognition, gene therapeutic, and structure-directing functions of DNA molecules are coupled with M/MC NPs. In turn, the M/MC NPs have optical, catalytic, pore structure, or photodynamic/photothermal properties, which are beneficial for sensing, theranostic, and drug loading applications. This review focuses on the different DNA functionalization protocols available for M/MC NPs, including gold NPs, upconversion NPs, metal-organic frameworks, metal oxide NPs and quantum dots. The biological applications of DNA-functionalized M/MC NPs in the treatment or diagnosis of cancers are discussed in detail.

Recent progress in functional metal-organic frameworks for bio-medical application

Metal-organic frameworks (MOFs) have a high specific surface area, adjustable pores and can be used to obtain functional porous materials with diverse and well-ordered structures through coordination and self-assembly, which has intrigued wide interest in a broad range of disciplines. In the arena of biomedical engineering, the functionalized modification of MOFs has produced drug carriers with excellent dispersion and functionalities such as target delivery and response release, with promising applications in bio-detection, disease therapy, tissue healing, and other areas. This review summarizes the present state of research on the functionalization of MOFs by physical binding or chemical cross-linking of small molecules, polymers, biomacromolecules, and hydrogels and evaluates the role and approach of MOFs functionalization in boosting the reactivity of materials. On this basis, research on the application of functionalized MOFs composites in biomedical engineering fields such as drug delivery, tissue repair, disease treatment, bio-detection and imaging is surveyed, and the development trend and application prospects of functionalized MOFs as an important new class of biomedical materials in the biomedical field are anticipated, which may provide some inspiration and reference for further development of MOF for bio-medical applications.

Enzyme-mediated Ru@UiO-66@MnO2 NSs/thiamine-based ratiometric fluorescence sensor for visual detection of organophosphorus pesticide residues

In view of the potential hazards of organophosphorus pesticides (OPs), this paper constructed a ratiometric fluorescent probe utilizing a functionalized metal-organic framework to detect OPs. Ru(bpy)3Cl2 was encapsulated inside UiO-66 as a reference signal, and MnO2 nanosheets (MnO2 NSs) were grown on the surface to obtain Ru@UiO-66@MnO2 NSs. Acetylcholinesterase catalyzed the decomposition of acetylcholine into reductive thiocholine, which consumed MnO2 NSs, thus restoring the Ru@UiO-66 fluorescence. Due to the enzymatic inhibition of OPs and the redox reaction between MnO2 NSs and thiamine, this probe emitted blue fluorescence in the presence of OPs. The probe achieved linear responses to dichlorvos and chlorpyrifos with LODs of 9.99 × 10-6 μg mL-1 and 9.99 × 10-5 μg mL-1. The probe exhibited a satisfactory recovery rate for OPs in green tea. Furthermore, a hydrogel detection platform was developed by embedding the probe into sodium alginate. Overall, this work provides a visual approach to detect OPs in agricultural products.

DNA-Functionalized Porphyrinic Metal-Organic Framework-Based Drug Delivery System for Targeted Bimodal Cancer Therapy

A DNA-functionalized porphyrinic MOF (porMOF) drug delivery system was successfully constructed. porMOF as a photosensitizer and drug delivery carrier can integrate photodynamic therapy (PDT) and chemotherapy. Via the strong coordination interaction between the zirconium cluster of porMOF and the terminal phosphate group of DNA, the stable modification of the DNA layer on the porMOF surface is achieved. Meanwhile, the introduction of C/G-rich base pairs into the DNA double-stranded structure provides more binding sites of chemotherapeutic drug doxorubicin (DOX). AS1411, an aptamer of nucleolin proteins that are overexpressed by cancer cells, is introduced in the double-stranded terminal, which can endow the nanosystem with the ability to selectively recognize cancer cells. C-rich sequences in DNA double strands form an i-motif structure under acidic conditions to promote the highly efficient release of DOX in cancer cells. In vitro and in vivo experiments demonstrate that the synergistic PDT/chemotherapy modality achieves highly efficient cancer cell killing and tumor ablation without undesirable side effects.

Interfacing metal organic frameworks with polymers or carbon-based materials: from simple to hierarchical porous and nanostructured composites

In the past few years, metal organic frameworks (MOFs) have been assembled with (bio)polymers and a series of carbon-based materials (graphene, graphene oxide, carbon nanotubes, carbon quantum dots, etc.) leading to a wide range of composites differing in their chemical composition, pore structure and functionality. The objective was mainly to overcome the limitations of MOFs in terms of mechanical properties, chemical stability and processability while imparting novel functionality (electron conductivity, (photo)catalytic activity, etc.) and hierarchical porosity. These composites were considered for numerous applications including gas/liquid adsorption and separation, (photo)catalysis, biomedicine, energy storage, conversion and so on. The performance of such composites depends strongly on their microstructural and physico-chemical properties which are mainly driven by the chemical strategies used to design and process such composites. In this perspective article, we propose to cover this topic and provide a useful survey of recent progress in the synthesis and design of MOFs-carbon material composites. This article will describe the development of composites with increasing complexity in terms of porous architecture, spatial structuration and organisation, and functionality.

Photocontrollable DNA Walker-Based Molecular Circuit for the Tunable Detection of MicroRNA-21 Using Metal-Organic Frameworks as Label-Free Fluorescence Tags

Tunable detection of microRNA is crucial to meet the desired demand for sample species with varying concentrations in clinical settings. Herein, we present a DNA walker-based molecular circuit for the detection of miRNA-21 (miR-21) with tunable dynamic ranges and sensitivity levels ranging from fM to pM. The phosphate-activated fluorescence of UiO-66-NH2 metal-organic framework nanoparticles was used as label-free fluorescence tags due to their competitive coordination effect with the Zr atom, which significantly inhibited the ligand-to-metal charge transfer. To achieve a tunable detection performance for miR-21, the ultraviolet sensitive o-nitrobenzyl was induced as a photocleavable linker, which was inserted at various sites between the loop and the stem of the hairpin probe to regulate the DNA strand displacement reaction. The dynamic range can be precisely regulated from 700- to 67,000-fold with tunable limits of detection ranging from 2.5 fM to 36.7 pM. Impressively, a Boolean logic tree and complex molecular circuit were constructed for logic computation and cancer diagnosis in clinical blood samples. This intelligent biosensing method presents a powerful solution for converting complex biosensing systems into actionable healthcare decisions and will facilitate early disease diagnosis.

A Versatile G-Quadruplex (G4)-Coated Upconverted Metal-Organic Framework for Hypoxic Tumor Therapy

Given the complexity of the tumor microenvironment, multiple strategies are being explored to tackle hypoxic tumors. The most efficient strategies combine several therapeutic modalities and typically requires the development of multifunctional nanocomposites through sophisticated synthetic procedures. Herein, the G-quadruplex (G4)-forming sequence AS1411-A (d[(G2 T)4 TG(TG2 )4 A]) is used for both its anti-tumor and biocatalytic properties when combined with hemin, increasing the production of O2 ca. two-fold as compared to the parent AS1411 sequence. The AS1411-A/hemin complex (GH) is grafted on the surface and pores of a core-shell upconverted metal-organic framework (UMOF) to generate a UMGH nanoplatform. Compared with UMOF, UMGH exhibits enhanced colloidal stability, increased tumor cell targeting and improved O2 production (8.5-fold) in situ. When irradiated by near-infrared (NIR) light, the UMGH antitumor properties are bolstered by photodynamic therapy (PDT), thanks to its ability to convert O2 into singlet oxygen (1 O2 ). Combined with the antiproliferative activity of AS1411-A, this novel approach lays the foundation for a new type of G4-based nanomedicine.

Facet-controlled assembly for organizing metal-organic framework particles into extended structures

Metal-organic frameworks (MOFs) are crystalline porous materials characterized by their high porosity and chemical tailorability. To realize the full potential of synthesized MOFs, it is important to transform them from crystalline solid powders into materials with integrated morphologies and properties. One promising approach is facet-controlled assembly, which involves arranging individual crystalline MOF particles into ordered macroscale structures by carefully controlling the interactions between particles. The resulting assembled MOF structures maintain the characteristics of individual particles while also exhibiting improved properties overall. In this article, we emphasize the essential concepts of MOF assembly, highlighting the impact of building blocks, surface interactions, and Gibbs free energy on the assembly process. We systematically examine three methods of guiding facet-controlled MOF assembly, including spontaneous assembly, assembly guided by external forces, and assembly through surface modifications. Lastly, we offer outlooks on future advancements in the fabrication of MOF-based material and potential application exploration.

Ultra-stable MOF@MOF nanoplatform for photodynamic therapy sensitized by relieved hypoxia due to mitochondrial respiration inhibition

Metal-organic frameworks (MOFs) with periodically arranged porphyrinic linkers avoiding the self-quenching issue of porphyrins in photodynamic therapy (PDT) have been widely applied. However, the porphyrinic MOFs still face challenges of poor stability under physiological conditions and limited photodynamic efficiency by the hypoxia condition of tumors. Herein, we fabricate the MOF@MOF structure with a protective MOF shell to improve the stability and relieve the hypoxia condition of tumors for sensitized PDT. Under protection of the MOF shell, the MOF@MOF structure can keep intact for 96 h under physiological conditions. Consequently, the tumoral accumulation efficiency is two folds of the MOF core. Furthermore, the MOF shell decomposes under acidic environment, and the loaded inhibitor of mitochondria pyruvate carrier (7-amino carboxycoumarins-2, 7ACC2) will be released. 7ACC2 inhibits the mitochondrial pyruvate influx and simultaneously blocks glucose and lactate from fueling the mitochondrial respiration, thereupon relieving the hypoxia condition of tumors. Under a 5-min laser irradiation, the 7ACC2 carrying MOF@MOF nanoplatforms induced doubled cellular apoptosis and reduced 70% of the tumor growth compared with the cargo-free MOF@MOF. In summary, the design of this stable and hypoxia self-relievable MOF@MOF nanoplatform will enlighten the future development of MOF-based nanomedicines and PDT. STATEMENT OF SIGNIFICANCE: Though widely used for photodynamic therapy (PDT) in previous studies, porphyrinic metal-organic frameworks (MOFs) still face challenges in poor stability under physiological conditions and limited photodynamic efficiency due to the hypoxia condition of tumors. In order to solve these problems, (1) we develop the MOF@MOF strategy to improve the physiological stability; (2) an inhibitor of mitochondria pyruvate carrier, 7-amino carboxycoumarins-2 (7ACC2), is loaded to inhibit the mitochondrial pyruvate influx and simultaneously block glucose and lactate from fueling the mitochondrial respiration, thereupon relieving the hypoxia condition of tumors. In comparison with previous studies, our strategy simultaneously improves stability and overcomes the limited PDT efficiency in the hypoxia tumor tissue, which will enlighten the future development of MOF-based nanomedicines and PDT.

Size- and Emission-Controlled Synthesis of Full-Color Luminescent Metal-Organic Frameworks for Tryptophan Detection

The development of nanoscaled luminescent metal-organic frameworks (nano-LMOFs) with organic linker-based emission to explore their applications in sensing, bioimaging and photocatalysis is of great interest as material size and emission wavelength both have remarkable influence on their performances. However, there is lack of platforms that can systematically tune the emission and size of nano-LMOFs with customized linker design. Herein two series of fcu- and csq-type nano-LMOFs, with precise size control in a broad range and emission colors from blue to near-infrared, were prepared using 2,1,3-benzothiadiazole and its derivative based ditopic- and tetratopic carboxylic acids as the emission sources. The modification of tetratopic carboxylic acids using OH and NH2 as the substituent groups not only induces significant emission bathochromic shift of the resultant MOFs, but also endows interesting features for their potential applications. As one example, we show that the non-substituted and NH2 -substituted nano-LMOFs exhibit turn-off and turn-on responses for highly selective and sensitive detection of tryptophan over other nineteen natural amino acids. This work sheds light on the rational construction of nano-LMOFs with specific emission behaviours and sizes, which will undoubtedly facilitate their applications in related areas.

Metal-Organic Framework Nanoparticles with Universal Dispersibility through Crown Ether Surface Coordination for Phase-Transfer Catalysis and Separation Membranes

Dispersing metal-organic framework (MOF) solids in stable colloids is crucial for their availability and processibility. Herein, we report a crown ether surface coordination approach for functionalizing the surface-exposed metal sites of MOF particles with amphiphilic carboxylated crown ether (CEC ). The surface-bound crown ethers significantly improve MOF solvation without compromising the accessible voids. We demonstrate that CEC -coated MOFs exhibit exceptional colloidal dispersibility and stability in 11 distinct solvents and six polymer matrices with a wide range of polarities. The MOF-CEC can be instantaneously suspended in immiscible two-phase solvents as an effective phase-transfer catalyst and can form various uniform membranes with enhanced adsorption and separation performance, which highlights the effectiveness of crown ether coating.

A bimetallic nanoplatform for STING activation and CRISPR/Cas mediated depletion of the methionine transporter in cancer cells restores anti-tumor immune responses

Lack of sufficient cytotoxic T lymphocytes (CD8+ T cells) infiltration and dysfunctional state of CD8+ T cells are considered enormous obstacles to antitumor immunity. Herein, we construct a synergistic nanoplatform to promote CD8+ T cell infiltration in tumors while restoring T cell function by regulating methionine metabolism and activating the STING innate immune pathway. The CRISPR/Cas9 system down-regulates the methionine transporter SLC43A2 and restricts the methionine uptake by tumor cells, thereby relieving the methionine competition pressure of T cells; simultaneously, the released nutrition metal ions activate the cGAS/STING pathway. In this work, the described nanoplatform can enhance the effect of immunotherapy in preclinical cancer models in female mice, enhancing STING pathway mediated immunity and facilitating the development of amino acid metabolic intervention-based cancer therapy.

Microfluidic one-step synthesis of a metal-organic framework for osteoarthritis therapeutic microRNAs delivery

As a class of short non-coding ribonucleic acids (RNAs), microRNAs (miRNA) regulate gene expression in human cells and are expected to be nucleic acid drugs to regulate and treat a variety of biological processes and diseases. However, the issues with potential materials toxicity, quantity production, poor cellular uptake, and endosomal entrapment limit their further applications in clinical practice. Herein, ZIF-8, a metal-organic framework with noncytotoxic zinc (II) as the metal coordination center, was selected as miRNA delivery vector was used to prepare miR-200c-3p@ZIF-8 in one step by Y-shape microfluidic chip to achieve intracellular release with low toxicity, batch size, and efficient cellular uptake. The obtained miR-200c-3p@ZIF-8 was identified by TEM, particle size analysis, XRD, XPS, and zeta potential. Compared with the traditional hydrothermal method, the encapsulation efficiency of miR-200c-3p@ZIF-8 prepared by the microfluidic method is higher, and the particle size is more uniform and controllable. The experimental results in cellular level verified that the ZIF-8 vectors with low cytotoxicity and high miRNAs loading efficiency could significantly improve cellular uptake and endosomal escape of miRNAs, providing a robust and general strategy for nucleic acid drug delivery. As a model, the prepared miR-200c-3p@ZIF-8 is confirmed to be effective in osteoarthritis treatment.

Quantifying Ligand Binding to the Surface of Metal-Organic Frameworks

The binding of molecules to the exterior surface of metal-organic frameworks (MOFs) is not a well-understood phenomenon. Herein, the surface chemistry of three MOFs, UiO-66, MIL-88B-NH₂, and ZIF-8, is investigated using dye-displacement experiments. MOF particle surfaces were modified with ligand-appended BODIPY dyes. The ability of the coordinated dyes to be displaced by a variety of exogenous ligands was measured by ultraviolet-visible spectroscopy. This method allowed for measurement of apparent binding constants for different ligands to the MOF surface. As might be expected, ligand affinity was dependent on the nature of the underlying metal-ligand composition of the MOF. This work provides a quantitative evaluation of ligand binding to MOF surfaces and important insights for the modulation, modification, and manipulation of MOFs.

Metal-organic coordination polymers for delivery of immunomodulatory agents, and infectious disease and cancer vaccines

Metal-organic coordination polymers (CPs) are a broad class of materials that include metal-organic frameworks (MOFs). CPs are highly ordered crystalline materials that are composed of metal ions (or metal ion clusters) and multidentate organic ligands that serve as linkers. One-, two-, and three-dimensional CPs can be formed, with 2D and 3D structures referred to as MOFs. CPs have gained a lot of attention due to attractive structural features like structure versatility and tunability, and well-defined pores that enable the encapsulation of cargo. Further, CPs show a lot of promise for drug delivery applications, but only a very limited number of CPs are currently being evaluated in clinical trials. In this review, we outlined features that are desired for CP-based drug delivery platform, and briefly described most relevant characterization techniques. We highlighted some of the recent efforts directed toward developing CP-based drug delivery platforms with the emphasis on vaccines against cancer, infectious diseases, and viruses. We hope this review will be a helpful guide for those interested in the design and evaluation of CP-based immunological drug delivery platforms. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

DNA-directed assembly of nanomaterials and their biomedical applications

In the past decades, DNA has been widely used in the field of nanostructures due to its unique programmable properties. Besides being used to form its own diverse structures such as the assembly of DNA origami, DNA can also be used for the assembly of nanostructures with other materials. In this review, different strategies for the functionalization of DNA on nanoparticle surfaces are listed, and the roles of DNA in the assembly of nanostructures as well as the influencing factors are discussed. Finally, the biomedical applications of DNA-assembled nanostructures were summarized. This review provided new insight into the application of DNA in nanostructure assembly.

A label-free multicolor colorimetric and fluorescence dual mode biosensing of HIV-1 DNA based on the bifunctional NiFe2O4@UiO-66 nanozyme

Finding the DNA of the human immune deficiency virus (HIV) with simple and sensitive detection is the main challenge in early diagnosis of AIDS. Herein, two-point separation strategies based on the colorimetric and fluorescence are introduced. The naked-eye qualitative and semiquantitative colorimetric, and also accuracy fluorescence quantification of HIV-1 DNA were applied using label-free NiFe₂O₄@UiO-66 nanozyme with both functions of peroxidase-mimetic like and emitting fluorescence. The DNA probe-conjugated nanozyme is employed to hybridize a sequence of HIV-1. NiFe₂O₄@UiO-66 nanozymes catalyze the decomposition of H₂O₂ to ^•OH which can produce a remarkable fluorescent product 2-hydroxyterephthalic acid (TAOH) by the oxidation of the bridging ligand of weakly fluorescent terephthalic acid (TA). The accessibility of H₂O₂ toward confined-NiFe₂O₄ MNPs was reduced by increasing the HIV-1 target DNA concentration, resulting in the fluorescence intensity of TAOH being decreased. Meanwhile, remaining the unreacted H₂O₂ was transferred an acidic colorimetric solution containing FeSO₄ and gold nanorods (AuNRs). Increasing the amount of H₂O₂ available for longitudinal etching of AuNRs due to •OH-generating Fe⁺²-catalyzed H₂O₂ is reponsible for different colors from brownish to colorless depending on the HIV-1 target DNA concentration. The fluorescence intensity and obtained colors have offered the sensitive biosensing methods with a linear range from 0.05 to 300 and 1-200 pM, respectively with a detection limit as low as 1 fM. Our study revealed that the applied sensing assay provides a cost-effective and straightforward qualitative, semiquantitative, and sensitive quantitation visible monitoring without the necessity of high-end instruments for HIV-1 detection in a human blood plasma/serum samples.

Insight into the Sensing Behavior of DNA Probes Based on MOF-Nucleic Acid Interaction for Bioanalysis

Adsorption of DNA probes onto nanomaterials is a promising strategy for bioassay establishment typically using fluorescence or catalytic activities to generate signals. Albeit important, there is currently a lack of systematic understanding of the sensing behaviors building on nanomaterial-DNA interactions, which greatly limits the rational method design and their subsequent applications. Herein, the issue was investigated by employing multifunctional metal-organic frameworks (MOFs) (FeTCPP⊂UiO-66) as a model that was synthesized via integrating heme-like ligand FeTCPP into commonly used MOFs (UiO-66). Our results demonstrated that the fluorescently labeled DNA adsorbed onto FeTCPP⊂UiO-66 was quenched through photoinduced electron transfer, fluorescence resonance energy transfer, and the internal filtration effect. Among different DNA structures, double-stranded DNA and hybridization chain reaction products largely retained their fluorescence due to desorption and conformational variation, respectively. In addition, ssDNA could maximally inhibit the peroxidase activity of FeTCPP⊂UiO-66, and this inhibition was strongly dependent on the strand length but independent of base composition. On the basis of these discoveries, a fluorescence/colorimetric dual-modal detection was designed against aflatoxin B1 with satisfactory performances obtained to further verify our results. This study provided some new insights into the sensing behaviors based on MOF-DNA interactions, indicating promising applications for rational bioassay design and its performance improvement.

Utilization of Functionalized Metal–Organic Framework Nanoparticle as Targeted Drug Delivery System for Cancer Therapy

Cancer is a multifaceted disease that results from the complex interaction between genetic and environmental factors. Cancer is a mortal disease with the biggest clinical, societal, and economic burden. Research on better methods of the detection, diagnosis, and treatment of cancer is crucial. Recent advancements in material science have led to the development of metal–organic frameworks, also known as MOFs. MOFs have recently been established as promising and adaptable delivery platforms and target vehicles for cancer therapy. These MOFs have been constructed in a fashion that offers them the capability of drug release that is stimuli-responsive. This feature has the potential to be exploited for cancer therapy that is externally led. This review presents an in-depth summary of the research that has been conducted to date in the field of MOF-based nanoplatforms for cancer therapeutics.

Metal-Organic Frameworks Nanocarriers for Functional Nucleic Acid Delivery in Biomedical Applications

Metal-organic frameworks (MOFs), a distinctive funtionalmaterials which is constructed by various metal ions and organic molecules, have gradually attracted researchers' attention from they were founded. In the last decade, MOFs emerge as a biomedical material with potential applications due to their unique properties. However, the MOFs performed as nanocarriers for functional nucleic acid delivery in biomedical applications rarely summarized. In this review, we introduce recent developments of MOFs for nucleic acid delivery in various biologically relevant applications, with special emphasis on cancer therapy (including siRNA, ASO, DNAzyme, miRNA and CpG oligodeoxynucleotides), bioimaging, biosensors and separation of biomolecules. We expect the accomplishment of this review could benefit certain researchers in biomedical field to develop novel sophisticated nanocarriers for functional nucleic acid delivery based on the promising material of MOFs.

Metal-Organic Framework-DNA Bio-Barcodes Amplified CRISPR/Cas12a Assay for Ultrasensitive Detection of Protein Biomarkers

CRISPR/Cas12a shows excellent potential in disease diagnostics. However, insensitive signal conversion strategies hindered its application in detecting protein biomarkers. Here, we report a metal-organic framework (MOF)-based DNA bio-barcode integrated with the CRISPR/Cas12a system for ultrasensitive detection of protein biomarkers. In this work, zirconium-based MOF nanoparticles were comodified with antibodies and bio-barcode phosphorylated DNA as an efficient signal converter, which not only recognized the protein biomarker to form the sandwich complex but also released the bio-barcode DNA activators after MOF dissociation to activate the trans-cleavage activity of Cas12a. Due to the obvious advantages, including numerous loaded oligonucleotides, a convenient release process, and the nontoxic release reagent, this MOF-DNA bio-barcode strategy could amplify the CRISPR/Cas12a system to achieve simple and highly sensitive detection of tumor protein biomarkers with detection limits of 0.03 pg/mL (PSA) and 0.1 pg/mL (CEA), respectively. Furthermore, this platform could detect PSA directly in clinical serum samples, offering a powerful tool for early disease diagnosis.

Aptamers-functionalized nanoscale MOFs for saxitoxin and tetrodotoxin sensing in sea foods through FRET

Saxitoxin (STX) and tetrodotoxin (TTX) are widely distributed and extremely harmful marine toxins, it is certainly worth to spend effort to develop facile methods to detect them in sea food for human safety. In this work, two nano-sensors were developed by combining with two zirconium fluorescence Nanoscale metal-organic frameworks (NMOFs) with two emissions and TAMRA-labelled aptamers for STX and TTX sensing, respectively. The recognition of STX and TTX by these nano-sensors could change the structure of aptamer, which caused the blue or green emissions from NMOFs (energy donor) decreased while red emission from TAMRA-labelled aptamers (energy acceptor) increased owing to fluorescence resonance energy transfer (FRET) effect. Based on this strategy, NMOFs-Aptasensor 1 and NMOFs-Aptasensor 2 were developed for the ratiometric detection, with detection limits of 1.17 nM and 3.07 nM for STX and TTX, respectively. Moreover, NMOFs-Aptasensors displayed significant stability, pH-independence, selectivity and NMOFs-Aptasensors were successfully applied in shellfish sample for toxin sensing.

Biocompatible engineered erythrocytes as plasmonic sensor initiators for high-sensitive screening of non-small cell lung cancer-derived exosomal miRNA in an integrated system

The development of a holistic solution is crucial for exosome-based liquid biopsy, which is a significant advancement from basic research to clinical application for the early and non-invasive diagnosis of disease. However, the challenge of current technology is how to facilitate the separation and quickly connect with the detection. Herein, employing miRNA-155 as a target, a novel integrated concentration and determination system of exosomes (ICDSE) was fabricated for the targeted enrichment of exosomes from the plasma of patients with non-small cell lung cancer and instant downstream analysis of exosomal miRNA. This ICDSE consists of aptamer-engineered erythrocytes with a supramolecular plasmonic biosensor. The streamlined analytical procedure benefited from engineered erythrocytes as an interlinkage, needlessly removing them before extracting total RNA due to the lack of nuclei. With the assistance of a specific aptamer and simple centrifugation, engineered erythrocytes achieved exceptional enrichment of exosomes within 30 min. The LOD of the biosensor for miR-155 approached 2.03 fM due to the substantially high refractive index of the quadruplet supramolecular dendrimer and zirconium metal-organic framework. Impressively, the developed ICDSE successfully isolated and evaluated exosomes from clinical specimens of patients with NSCLC, which can also be promising for other diseases with identifiable exosome signatures. Thus, our ICDSE is expected to have widespread biomedical applications, as it is economical and well-accepted.

Metal Organic Framework-Based Bio-Barcode CRISPR/Cas12a Assay for Ultrasensitive Detection of MicroRNAs

CRISPR/Cas12a has shown great potential in molecular diagnostics, but its application in sensing of microRNAs (miRNAs) was limited by sensitivity and complexity. Here, we have sensitively and conveniently detected microRNAs by reasonably integrating metal-organic frameworks (MOFs) based biobarcodes with CRISPR/Cas12a assay (designated as MBCA). In this work, DNA-functionalized Zr-MOFs were designed as the converter to convert and amplify each miRNA target into activators that can initiate the trans-cleavage activity of CRISPR/Cas12a to further amplify the signal. Such integration provides a universal strategy for sensitive detection of miRNAs. By tuning the complementary sequences modified on nanoprobes, this assay achieves subattomolar sensitivity for different miRNAs and was selective to single-based mismatches. With the proposed method, the expression of miR-21 in different cancer cells can be assessed, and breast cancer patients and healthy individuals can be differentiated by analyzing the target miRNAs extracted from serum samples, holding great potential in clinical diagnosis.

"Three-in-one" Zr-MOF Multifunctional Carrier-mediated Fluorescent and Colorimetric Dual-signal Readout Biosensing Platform to Enhance Analytical Performance

To address the urgent demand for sensitive and stable detection applications, significant efforts have been made in the development of dual-signal readout assays for precise target detection and timely health risk control. Here, a new nanomaterial, Pt@PCN-224-HRP-initiator DNA (PP-HRP-iDNA), was exploited to construct a dual-signal readout biosensing platform. Zr-MOF (PCN-224) was loaded with as many Pt nanoparticles (NPs) and as much horseradish peroxidase (HRP) as possible to enhance the brightness of the colorimetric signal recognizable to the naked eye while also acting as a gatekeeper to protect the enzyme activity and ensuring the stability of the assay process. Moreover, the Pt NPs and HRP displayed a synergistic catalytic effect, which promoted the sensitivity of detection. Further, the formation of the Zr-O-P bond eliminated the instability of the interactions between PCN-224 and iDNA in a controllable manner. After the immunoreaction, iDNA stimulated a hybridization chain reaction, resulting in a significant reduction of the fluorescent DNA in the supernatant and a fluorescent signal change. Subsequently, the PP-HRP-iDNA probe implemented UV-light response (450 nm) where 3,3',5,5'-tetramethylbenzidine was used as a substrate for the colorimetric signal readout. By virtue of the nanomaterial-modulated transduction mechanism and the antigen-antibody interactions, this dual-signal biosensor displays high sensitivity, with a limit of detection of 0.65 pg/mL for aflatoxin B₁ and 4 CFU/mL for Salmonella enteritidis, suggesting the detection potential of the biosensing platform for analyzing various targets.

Responsive Accumulation of Nanohybrids to Boost NIR-Phototheranostics for Specific Tumor Imaging and Glutathione Depletion-Enhanced Synergistic Therapy

Dynamic regulation of nanoparticles in a controllable manner has great potential in various areas. Compared to the individual nanoparticles, the assembled nanoparticles exhibit superior properties and functions, which can be applied to achieve desirable performances. Here, a pH-responsive i-motif DNA-mediated strategy to tailor the programmable behaviors of erbium-based rare-earth nanoparticles (ErNPs) decorated copper doped metal-organic framework (CPM) nanohybrids (ECPM) under physiological conditions is reported. Within the acidic tumor microenvironment, the i-motif DNA strands are able to form quadruplex structures, resulting in the assembly of nanohybrids and selective tumor accumulation, which further amplify the ErNPs downconversion emission (1550 nm) signal for imaging. Meanwhile, the ECPM matrix acts as a near-infrared (NIR) photon-activated reactive oxygen species (ROS) amplifier through the singlet oxygen generation of the matrix in combination with its ability of intracellular glutathione depletion upon irradiation. In short, this work displays a classical example of engineering of nanoparticles, which will manifest the importance of developing nanohybrids with structural programmability in biomedical applications.

Rapid and efficient isolation platform for plasma extracellular vesicles: EV-FISHER

Extracellular vesicles (EVs) have found diverse applications in clinical theranostics. However, the current techniques to isolate plasma EVs suffer from burdensome procedures and limited yield. Herein, we report a rapid and efficient EV isolation platform, namely, EV-FISHER, constructed from the metal-organic framework featuring cleavable lipid probes (PO4 3- -spacer-DNA-cholesterol, PSDC). The EV-FISHER baits EVs from plasma by cholesterol and separates them with an ordinary centrifuge. The captured EVs could be released and collected upon subsequent cleavage of PSDC by deoxyribonuclease I. We conclude that EV-FISHER dramatically outperforms the ultracentrifugation (UC) in terms of time (∼40 min vs. 240 min), isolation efficiency (74.2% vs. 18.1%), and isolation requirement (12,800 g vs. 135,000 g). In addition to the stable performance in plasma, EV-FISHER also exhibited excellent compatibility with downstream single-EV flow cytometry, enabling the identification of glypican-1 (GPC-1) EVs for early diagnosis, clinical stages differentiation, and therapeutic efficacy evaluation in breast cancer cohorts. This work portrays an efficient strategy to isolate EVs from complicated biological fluids with promising potential to facilitate EVs-based theranostics.

Nanoscale MOFs: From synthesis to drug delivery and theranostics applications

Since the first report in 1989, Metal-Organic Frameworks (MOFs) self-assembled from metal ions or clusters, as well as organic linkers, have attracted extensive attention. Due to their flexible composition, large surface areas, modifiable surface properties, and their degradability, there has been an exponential increase in the study of MOFs materials, specifically in drug delivery system areas such as infection, diabetes, pulmonary disease, ocular disease, imaging, tumor therapy, and especially cancer theranostics. In this review, we discuss the trends in MOFs biosafety, from "green" synthesis to applications in drug delivery systems. Firstly, we present the different "green" synthesis approaches used to prepare MOFs materials. Secondly, we detail the methods for the functional coating, either through grafting targeting units, poly(ethylene glycol) (PEG) chains or by using cell membranes. Then, we discuss drug encapsulation strategies, host-guest interactions, as well as drug release mechanisms. Lastly, we report on the drug delivery applications of nanoscale MOFs. In particular, we discuss MOFs-based imaging techniques, including magnetic resonance imaging (MRI), photoacoustic imaging (PAI), positron emission tomography (PET), and fluorescence imaging. MOFs-based cancer therapy methods are also presented, such as photothermal therapy (PTT), photodynamic therapy (PDT), radiotherapy (RT), chemotherapy, and immunotherapy.

A quest for cytocompatible metal organic frameworks in non-viral gene therapy: Relevance of zeolitic imidazolate framework-8

Metal-organic frameworks (MOFs) are an emerging group of nanomaterials for successful biomedical applications in gene therapy. The most commonly biocompatible MOFs are zinc-based ZIFs, zirconium-based UiOs, and iron-based MILs. However, despite increasing applications, a comparative study to underscore the critical factors for determining effective gene delivery by such MOFs is lacking. Herein, we evaluate the potential of UiO-66 and MIL-88B and ZIF-8 for gene therapeutics delivery; revealing the comparative importance of ZIF-8. Cytotoxicity assays proved insufficient for selecting the ideal gene delivery MOF vehicle. Synthesis conditions such as ability of the MOF scaffold to envelop the gene during in-situ synthesis, post-treatment such as washing, and gene loading efficiency proved to be the critical factors in determining the favourable MOF from the material selection perspective. Rapid in-situ synthesis under physiological conditions, successful gene loading, and low concentration requirements favour ZIF MOFs as gene delivery vehicles. Impact on cellular physiology, metabolism, and architecture revealed neutrality of the delivery system; and relative effects on pro-inflammatory and anti-inflammatory cytokines suggest immunomodulatory impact.

Synthesis and Biomedical Applications of Highly Porous Metal-Organic Frameworks

In this review, aspects of the synthesis, framework topologies, and biomedical applications of highly porous metal-organic frameworks are discussed. The term "highly porous metal-organic frameworks" (HPMOFs) is used to denote MOFs with a surface area larger than 4000 m² g^-1. Such compounds are suitable for the encapsulation of a variety of large guest molecules, ranging from organic dyes to drugs and proteins, and hence they can address major contemporary challenges in the environmental and biomedical field. Numerous synthetic approaches towards HPMOFs have been developed and discussed herein. Attempts are made to categorise the most successful synthetic strategies; however, these are often not independent from each other, and a combination of different parameters is required to be thoroughly considered for the synthesis of stable HPMOFs. The majority of the HPMOFs in this review are of special interest not only because of their high porosity and fascinating structures, but also due to their capability to encapsulate and deliver drugs, proteins, enzymes, genes, or cells; hence, they are excellent candidates in biomedical applications that involve drug delivery, enzyme immobilisation, gene targeting, etc. The encapsulation strategies are described, and the MOFs are categorised according to the type of biomolecule they are able to encapsulate. The research field of HPMOFs has witnessed tremendous development recently. Their intriguing features and potential applications attract researchers' interest and promise an auspicious future for this class of highly porous materials.

Label-free fluorescence aptasensor for the detection of patulin using target-induced DNA gates and TCPP/BDC-NH2 mixed ligands functionalized Zr-MOF systems

Patulin (PAT) is an unsaturated lactone mycotoxin primarily produced by Penicillium expansum and Aspergillus clavatus. Given the potential health risks and economic losses associated with PAT, the rapid detection of PAT using fluorescent aptasensors is of significant importance in evaluating food safety. However, it easily increases the cost and complexity caused by signal labeling. We combined TCPP/BDC-NH₂ mixed ligands functionalized Zr metal-organic frameworks (Zr-MOF_mix) and terminated three-stranded DNA gates (ttsDNA gates) to fabricate a label-free fluorescent aptasensor for PAT detection. The Zr-MOF_mix system was synthesized via a one-pot strategy and could be used to address the problem of pore size limitation and increase the loading amounts of dyes. TtsDNA gate was integrated into the Zr-MOF_mix system to control the release of dyes, exhibiting a high signal-to-background ratio. The single-stranded aptamer region in ttsDNA gate situated away from the surface of the Zr-MOF_mix, resulting in a natural release of dyes in the absence of PAT. While binding to PAT resulted in target-induced conformational changes that helped form the hairpin structure of the aptamer. This structure hindered the release of dyes from the pores of Zr-MOF_mix, thus reducing the fluorescence signals intensity. The stimuli-responsive DNA-gated material provides a platform for PAT analysis under conditions of a low limit of detection (0.871 pg/mL). Furthermore, the excellent specificity and anti-interference of the fluorescent aptasensor make the system suitable for the analysis of apple juice samples. This label-free strategy is cheaper and simper compared with labeled detection, especially for the development of multi-target-detection.

Detection of Pb2+ in Tea Using Aptamer Labeled with AIEgen Nanospheres Based on MOFs Sensors

Tea is an important economic crop and health beverage in China. The presence of heavy metal ions in tea poses a significant threat to public health. Here, we prepared an aptamer biosensor labelled with AIEgen nanospheres to detect Pb²⁺ in tea. The dsDNA modified by amino and phosphoric acid was combined with the carboxylated AIEgen NPs to form AIEgen-DNA with a fluorescence group, which was then fixed to the surface of Zr-MOFs to quench the fluorescence of AIEgen NPs. At the same time, PEG was added to remove nonspecific adsorption. Then Pb²⁺ was added to cut the DNA sequences containing the cutting sites, and AIEgen NPs and part of the DNA sequences were separated from the Zr-MOFs surface to recover the fluorescence. By comparing the fluorescence changes before and after adding Pb²⁺, the detection limit of Pb²⁺ can reach 1.70 nM. The fluorescence sensor was applied to detect Pb²⁺ in tea, and the detection results showed that the tea purchased on the market did not contain the concentration of Pb²⁺ within the detection range. This study provides new insights into monitoring food and agriculture-related pollutants based on fluorescent biosensors.

Metal-organic frameworks for pharmaceutical and biomedical applications

Metal-organic framework (MOF) materials provide unprecedented opportunities for evaluating valuable compounds for various medical applications. MOFs merged with biomolecules, used as novel biomaterials, have become particularly useful in biological environments. Bio-MOFs can be promising materials in the global to avoid utilization above toxicological substances. Bio-MOFs with crystallin and porosity nature offer flexible structure via bio-linker and metal node variation, which improves their wide applicability in medical science.

Low-dimensional assemblies of metal-organic framework particles and mutually coordinated anisotropy

Assembling metal-organic framework (MOF)-based particles is an emerging approach for creating colloidal superstructures and hierarchical functional materials. However, realization of this goal requires strategies that not only regulate particle interactions but also harness the anisotropic morphologies and functions of various frameworks. Here, by exploiting depletion interaction induced by ionic amphiphiles, we show the assembly of a broad range of low-dimensional MOF colloidal superstructures, including 1D straight chains, alternating or bundled chains, 2D films of hexagonal, square, centered rectangular, and snowflake-like architectures, and quasi-3D supercrystals. With well-defined polyhedral shapes, the MOF particles are mutually oriented upon assembly, producing super-frameworks with hierarchically coordinated crystallinity and micropores. We demonstrate this advantage by creating functional MOF films with optical anisotropy, in our cases, birefringence and anisotropic fluorescence. Given the variety of MOFs available, our technique should allow access to advanced materials for sensing, optics, and photonics.

Colloidal self-assembly is a powerful strategy for designing materials, and MOFs offer wide structural and functional diversity. Here, authors present the self-assembly of MOF microcrystals using depletion interactions to form low-dimensional MOF colloidal superstructures with anisotropic properties.

Metal organic frameworks (MOFS) as non-viral carriers for DNA and RNA delivery: a review

Metal-Organic Frameworks (MOFs) are a class of crystalline materials that, thanks to their large surface area and high porosity, allow them to be used in various areas of knowledge. This diversity of applications is due to the metal ions and the organic binders that compose them, but it is also important to highlight the ability of MOFs to function as hosts for a great variety of molecules of very different sizes and chemical properties. The first existing approaches for incorporating biomolecules in MOFs are discussed: pore encapsulation, surface binding, covalent binding, and in-situ encapsulation. Next, we discuss the obstacles of designing MOFs for effective gene delivery and how to enhance the gene delivery using different strategies.

Smartphone-Based Electrochemiluminescence for Visual Simultaneous Detection of RASSF1A and SLC5A8 Tumor Suppressor Gene Methylation in Thyroid Cancer Patient Plasma

Visual one-step simultaneous detection of low-abundance methylation is a crucial challenge in early cancer diagnosis in a simple manner. Through the design of a closed split bipolar electrochemistry system (BE), detection of promoter methylation of tumor suppressor genes in papillary thyroid cancer, RASSF1A and SLC5A8, was achieved using electrochemiluminescence. For this purpose, electrochemiluminescence of luminol loaded into the Fe₃O₄@UiO-66 and gold nanorod-functionalized graphite-like carbon nitride nanosheet (AuNRs@C₃N₄ NS), separately, on the anodic and cathodic pole bipolar electrodes (BPEs) in two different chambers of a bipolar cell were recorded on a smartphone camera. To provide the same electric potential (ΔE_elec) through the BPEs to conduct simultaneous light emission, as well as to achieve higher sensitivity, anodic and cathodic poles BPEs were separately connected to ruthenium nanoparticles electrodeposited on nitrogen-doped graphene-coated Cu foam (fCu/N-GN/RuNPs) to provide a hydrogen evolution reaction (HER) and polycatechol-modified reduced graphene oxide/pencil graphite electrode (PC-rGO/PGE) to provide electrooxidation of hydrazine. Moreover, taking advantages of the strong cathodic ECL activity due to the roles of AuNRs, as well as the high density of capture probes on the UiO-66 and Fe₃O₄ roles in improving the signal-to-background ratio (S/B) in complicated plasma media, a sensitive visual ECL immunosensor was developed to detect two different genes as model target analytes in patient plasma samples. The ability of discrimination of methylation levels as low as 0.01% and above 90% clinical sensitivity in thyroid cancer patient plasma implies that the present strategy is able to diagnose cancer early, as well as monitor responses of patients to therapeutic agents.

Efficient Biocatalytic System for Biosensing by Combining Metal-Organic Framework (MOF)-Based Nanozymes and G-Quadruplex (G4)-DNAzymes

A high catalytic efficiency associated with a robust chemical structure are among the ultimate goals when developing new biocatalytic systems for biosensing applications. To get ever closer to these goals, we report here on a combination of metal-organic framework (MOF)-based nanozymes and a G-quadruplex (G4)-based catalytic system known as G4-DNAzyme. This approach aims at combining the advantages of both partners (chiefly, the robustness of the former and the modularity of the latter). To this end, we used MIL-53(Fe) MOF and linked it covalently to a G4-forming sequence (F3TC), itself covalently linked to its cofactor hemin. The resulting complex (referred to as MIL-53(Fe)/G4-hemin) exhibited exquisite peroxidase-mimicking oxidation activity and an excellent robustness (being stored in water for weeks). These properties were exploited to devise a new biosensing system based on a cascade of reactions catalyzed by the nanozyme (ABTS oxidation) and an enzyme, the alkaline phosphatase (or ALP, ascorbic acid 2-phosphate dephosphorylation). The product of the latter poisoning the former, we thus designed a biosensor for ALP (a marker of bone diseases and cancers), with a very low limit of detection (LOD, 0.02 U L^-1), which is operative in human plasma samples.

Modulating the Biomimetic and Fluorescence Quenching Activities of Metal-Organic Framework/Platinum Nanoparticle Composites and Their Applications in Molecular Biosensing

Nanoscale metal-organic frameworks (nMOFs) have gained considerable attention with significant potential applications. Although great efforts have been devoted to designing and fabricating nanoscaffold structures, approaches of deliberately regulating the intrinsic functionality of nMOFs have been poorly explored. Herein, we report a simple and novel strategy to regulate the catalytic and fluorescence quenching behaviors of nMOFs through coordination-driven self-assembly. As a proof-of-concept, we synthesized a synergistic and stable MOF-metal nanocomposite by loading platinum nanoparticles (PtNPs) on a commonly used Fe-MOF, i.e., MIL-88B-NH₂/Pt, as a MOF composite model for exploration. On one hand, the complexation with ATP effectively broke the pH limitation of the peroxidase-mimicking MIL-88B-NH₂/Pt nanozyme, bringing a 10-fold increased catalytic activity under alkaline condition. Based on the distinct catalytic enhancement between ATP and other nucleotides, real-time monitoring of apyrase activity as well as colorimetric detection of alkaline phosphatase (ALP) was performed. On the other hand, interactions of MIL-88B-NH₂/Pt with fluorescent DNA were tolerant of different nucleic acids and, more importantly, were further manipulated by inorganic molecules. As a result, H₂O₂ could only trigger the release of a G-rich sequence, while phosphates could readily induce desorption of various DNA molecules with varying lengths, sequences, and fluorescent dyes. Accordingly, fluorescent DNA and MIL-88B-NH₂/Pt as functional probe-quencher pairs were proposed, allowing the establishment of a fluorescence bioassay for ALP and PPase detection and Boolean logic calculations. This work offers a means to tune the intrinsic activities of nMOFs by surface engineering, benefiting design of functional nanomaterials and development of advanced biosensing systems.

Biofunctionalized metal-organic frameworks and host-guest interactions for advanced biomedical applications

Owing to highly favourable properties such as enormous internal surface areas, high porosity and large flexibility, when it comes to the choice of precursors and high control over their structures and porosity, metal-organic frameworks (MOFs) have emerged as promising materials for applications such as gas storage and separation, catalysis, wastewater filtration, etc. The applications of MOFs, despite being so lucrative materials, are very limitedly explored in biomedical applications owing to several concerns such as their biocompatibility, rate of degradation and rate of accumulation in tissues and biological systems. Newer methods are being developed to make MOFs more biologically palatable by their surface functionalization using biomolecules such as nucleic acids, amino acids and lipids. Here we present the progress in biofunctionalization methods of MOFs for improving their physical and chemical properties for biomedical applications, with special focus on their formation via covalent and non-covalent routes. Following this, we discuss in detail the applications of these biofunctionalized MOFs in areas of drug delivery, bio-sensing and bio-imaging. We conclude by presenting a brief outlook of the major challenges that lie ahead for mainstream usage of these materials for advanced biomedical applications.