Tunable White-Light Emission in Single-Cation-Templated Three-Layered 2D Perovskites (CH3CH2NH3)4Pb3Br10-xClx

High External Quantum Efficiency and Dual-Band Emission of (C7H18N)3Sb2Cl9 for Sensitivity Temperature Sensing

Organic-inorganic hybrid halides have gained attention for their ease of processing and remarkable optoelectronic properties. However, the relationship between the structure and optical properties requires further exploration. In this study, the butyltrimethylammonium cation (C7H18N+) was chosen, and seven compounds were synthesized: (C7H18N)3Sb2X9 (X = Cl, Br), (C7H18N)3Bi2X9 (X = Cl, Br, I), and (C7H18N)(C2H8N)MBr5 (M = Sb, Bi). Crystals with a single organic cation exhibit a zero-dimensional structure, while the introduction of dimethylamine ions increases the crystal dimensionality from zero-dimensional (C7H18N)3Sb2Br9 to one-dimensional (C7H18N)(C2H8N)SbBr5. Under 372 nm excitation, (C7H18N)3Sb2Cl9 showed broad orange-red single-band emission with a high photoluminescence quantum yield of 88.4% and an external quantum efficiency of up to 56.9%. A white light-emitting diode based on (C7H18N)3Sb2Cl9 achieved a high color rendering index of 96.3. Moreover, dual-band emission was observed in (C7H18N)3Sb2Cl9 under 308 nm excitation, which exhibits an absolute temperature sensitivity of 1.96 × 10-3 K-1 (320 K), and a flexible film was prepared by incorporating polydimethylsiloxane. This shows the promise of hybrid metal halides as photoluminescent materials and their possibilities for temperature sensing.

Self-Trapped Exciton Emission in Highly Polar 0D Hybrid Ammonium/Hydronium-Based Perovskites Triggered by Antimony Doping

Various monovalent cations are employed to construct metal halide perovskites with various structures and functionalities. However, perovskites based on highly polar A-site cations have seldom been reported. Here, a novel hybrid 0D (NH4)x(OH3)3-xInCl6 perovskite with highly polar hydronium OH3+ cations is introduced in this study. Upon doping with Sb3+, hybrid 0D (NH4)x(OH3)3-xInCl6 single crystals exhibited highly efficient broadband yellowish-green (550 nm) and red (630 nm) dual emissions with a PLQY of 86%. The dual emission arises due to Sb3+ occupying two sites within the crystal lattice that possess different polarization environments, leading to distinct Stokes shift energies. The study revealed that lattice polarity plays a significant role in the self-trapped exciton emission of Sb3+-doped perovskites, contributing up to 25% of the Stokes shift energy for hybrid 0D (NH4)x(OH3)3-xInCl6:Sb3+ as a secondary source, in addition to the Jahn-Teller deformation. These findings highlight the potential of Sb3+-doped perovskites for achieving tunable broadband emission and underscore the importance of lattice polarity in determining the emission properties of perovskite materials.

The past 10 years of molecular ferroelectrics: structures, design, and properties

Ferroelectricity, which has diverse important applications such as memory elements, capacitors, and sensors, was first discovered in a molecular compound, Rochelle salt, in 1920 by Valasek. Owing to their superiorities of lightweight, biocompatibility, structural tunability, mechanical flexibility, etc., the past decade has witnessed the renaissance of molecular ferroelectrics as promising complementary materials to commercial inorganic ferroelectrics. Thus, on the 100th anniversary of ferroelectricity, it is an opportune time to look into the future, specifically into how to push the boundaries of material design in molecular ferroelectric systems and finally overcome the hurdles to their commercialization. Herein, we present a comprehensive and accessible review of the appealing development of molecular ferroelectrics over the past 10 years, with an emphasis on their structural diversity, chemical design, exceptional properties, and potential applications. We believe that it will inspire intense, combined research efforts to enrich the family of high-performance molecular ferroelectrics and attract widespread interest from physicists and chemists to better understand the structure-function relationships governing improved applied functional device engineering.

What Matters for the Charge Transport of 2D Perovskites?

Compared to 3D perovskites, 2D perovskites exhibit excellent stability, structural diversity, and tunable bandgaps, making them highly promising for applications in solar cells, light-emitting diodes, and photodetectors. However, the trade-off for worse charge transport is a critical issue that needs to be addressed. This comprehensive review first discusses the structure of 3D and 2D metal halide perovskites, then summarizes the significant factors influencing charge transport in detail and provides a brief overview of the testing methods. Subsequently, various strategies to improve the charge transport are presented, including tuning A'-site organic spacer cations, A-site cations, B-site metal cations, and X-site halide ions. Finally, an outlook on the future development of improving the 2D perovskites' charge transport is discussed.

Structure and Optical Properties of Sn-Based Halide Perovskites (C10H18N2)SnX4 (X = Cl, Br, I)

Low-dimensional tin-based halide perovskites are considered as eco-friendly substitutions of the iconic lead-based perovskites to host the potential as optoelectronic materials. However, a fundamental understanding of the structure-property relationship of these Sn(II)-based hybrids is still inadequate due to the limited members of this material family. To our knowledge, there is still lack of reports on a series of Sn(II)-based halide perovskites with the same organic cation but covering chloride, bromide, and iodide. In this work, three new halide perovskites TMPDASnX4 (X = Cl, Br, I) (TMPDA = N,N,N',N'-tetramethyl-1,4-phenylenediamine) are successfully synthesized, which provide the ideal paradigm to study the halogen-dependent evolution of the structure and properties of Sn(II)-based hybrid perovskites. Despite sharing the same monoclinic lattice (P21/m space group), it is demonstrated that TMPDASnCl4 adopts a one-dimensional structure composed of a five-coordinated pyramid configuration due to an extremely long Sn···Cl distance, while the typical two-dimensional motif is still maintained in TMPDASnBr4 and TMPDASnI4. The ambient stability is declined in the order from chloride to bromide and then to iodide. TMPDASnCl4 exhibits a broad-band bluish-white-light emission (centered at 515 nm, full width at half-maximum (fwhm) = 193 nm) with the Commission Internationale de l' Elairage (CIE) coordinates as (0.29, 0.34). Further, the correlated color temperature and color-rendering index were determined as 7617 K and 80.5, respectively. Based on the synthesis of new crystals, our work sheds light on the composition-structure-property relationship of hybrid Sn(II)-based halide perovskites.

Tuning Electronic and Structural Properties of Lead-Free Metal Halide Perovskites: A Comparative Study of 2D Ruddlesden-Popper and 3D Compositions

In recent decades, two-dimensional (2D) perovskites have emerged as promising semiconductors for next-generation photovoltaics, showing notable advancements in solar energy conversion. Herein, we explore the impact of alternative inorganic lattice BX-based compositions (B=Ge or Sn, X=Br or I) on the energy gap and stability. Our investigation encompasses BA2Man-1BnX3n+1 2D Ruddlesden-Popper perovskites (for n=1-5 layers) and 3D bulk (MA)BX3 systems, employing first-principles calculations with spin-orbit coupling (SOC), DFT-1/2 quasiparticle, and D3 dispersion corrections. The study unveils how atoms with smaller ionic radii induce anisotropic internal and external distortions within the inorganic and organic lattices. Introducing the spacers in the low-layer regime reduces local distortions but widens band gaps. Our calculation protocol provides deeper insights into the physics and chemistry underlying 2D perovskite materials, paving the way for optimizing environmentally friendly alternatives that can efficiently replace with sustainable materials.

Broadband Emission Induced by Band-Edge Carrier Reconfiguration in 2D Hybrid Lead Halide Perovskites

Broadband emission in hybrid lead halide perovskites (LHPs) has gained significant attention due to its potential applications in optoelectronic devices. The origin of this broadband emission is primarily attributed to the interactions between electrons and phonons. Most investigations have focused on the impact of structural characteristics of LHPs on broadband emission, while neglecting the role of electronic mobility. In this work, the study investigates the electronic origins of broadband emission in a family of 2D LHPs. Through spectroscopic experiments and density functional theory calculations, the study unveils that the electronic states of the organic ligands with conjugate effect in LHPs can extend to the band edges. These band-edge carriers are no longer localized only within the inorganic layers, leading to electronic coupling with molecular states in the barrier and giving rise to additional interactions with phonon modes, thereby resulting in broadband emission. The high-pressure photoluminescence measurements and theoretical calculations reveal that hydrostatic pressure can induce the reconfiguration of band-edge states of charge carriers, leading to different types of band alignment and achieving macroscopic control of carrier dynamics. The findings can provide valuable guidance for targeted synthesis of LHPs with broadband emission and corresponding design of state-of-the-art optoelectronic devices.

Solvent-Templated Methylammonium-Based Ruddlesden-Popper Perovskites with Short Interlayer Distances

Two-dimensional (2D) halide perovskites are exquisite semiconductors with great structural tunability. They can incorporate a rich variety of organic species that not only template their layered structures but also add new functionalities to their optoelectronic characteristics. Here, we present a series of new methylammonium (CH3NH3+ or MA)-based 2D Ruddlesden-Popper perovskites templated by dimethyl carbonate (CH3OCOOCH3 or DMC) solvent molecules. We report the synthesis, detailed structural analysis, and characterization of four new compounds: MA2(DMC)PbI4 (n = 1), MA3(DMC)Pb2I7 (n = 2), MA4(DMC)Pb3I10 (n = 3), and MA3(DMC)Pb2Br7 (n = 2). Notably, these compounds represent unique structures with MA as the sole organic cation both within and between the perovskite sheets, while DMC molecules occupy a tight space between the MA cations in the interlayer. They form hydrogen-bonded [MA···DMC···MA]2+ complexes that act as spacers, preventing the perovskite sheets from condensing into each other. We report one of the shortest interlayer distances (∼5.7-5.9 Å) in solvent-incorporated 2D halide perovskites. Furthermore, the synthesized crystals exhibit similar optical characteristics to other 2D perovskite systems, including narrow photoluminescence (PL) signals. The density functional theory (DFT) calculations confirm their direct-band-gap nature. Meanwhile, the phase stability of these systems was found to correlate with the H-bond distances and their strengths, decreasing in the order MA3(DMC)Pb2I7 > MA4(DMC)Pb3I10 > MA2(DMC)PbI4 ∼ MA3(DMC)Pb2Br7. The relatively loosely bound nature of DMC molecules enables us to design a thermochromic cell that can withstand 25 cycles of switching between two colored states. This work exemplifies the unconventional role of the noncharged solvent molecule in templating the 2D perovskite structure.

Synthesis, Structure, and Optical Properties of a 0D Hybrid Organic-Inorganic Metal Halide (C5N2H14Cl)GeCl3

Due to the flexible structural tunability and excellent photoelectric performance, hybrid organic-inorganic metal halides (OIMHs) have attracted intensive attention and become a hot topic in the field of materials. It is important and necessary to explore new OIMHs and study their structure-property relationship. In this work, a new lead-free OIMH, (C5N2H14Cl)GeCl3, is synthesized by the combination of hydrothermal and solution methods. This compound features a zero-dimensional structure composed of inorganic [GeCl3]- trigonal pyramids surrounded by isolated Cl- anions and organic (C5N2H14)2+ cations. Preliminary characterization and first-principles calculations are performed to study its basic optical properties. Interestingly, (C5N2H14Cl)GeCl3 shows weak blue emission under ultraviolet excitation, and the intrinsic mechanism is discussed.

Full-Spectrum White-Light Emission from Triple Self-Trapped Excitons in Hybrid Mixed-Metal Halides

Low-dimensional metal halides with broadband emissions are expected to serve as downconversion luminescent materials for solid-state lighting (SSL). However, efficiently generating full-spectrum white-light emission with a high color-rendering index (CRI) in single-phase emitters remains a challenge. Here, we report a novel zero-dimensional (0D) hybrid mixed-metal halide (TPA)2CuAgI4 (TPA = tetrapropylammonium), in which individual [CuAgI4]2- dimers are completely isolated and surrounded by the organic cations TPA+. Cu+ and Ag+ share the same crystallographic site in [CuAgI4]2- dimers with the same statistical probability. Upon photoexcitation, single crystals exhibit a full-spectrum white-light emission with a full width at half-maximum (fwhm) of up to 314 nm and a high quantum efficiency of 46.8%. Detailed photophysical studies and theoretical calculations reveal that the ultra-broadband emission of (TPA)2CuAgI4 originates from the radiative recombination of red-, green-, and blue-emitting self-trapped excitons in [CuAgI4]2- dimers. In addition, (TPA)2CuAgI4 nanocrystals were successfully synthesized and exhibited optical properties similar to those of single-crystal counterparts. Finally, a prototype ultraviolet (UV)-pumped white-light-emitting diode (WLED) and a composite thin film employing this new white-light emitter produces a well-distributed full-spectrum white light with a high CRI of 91.4 and a warm correlated color temperature (CCT) of 4135 K, indicating the potential application of this white-light emitter in SSL. These results provide a new perspective for designing superior single-phase white-light emitters.

Pressure-Induced Free Exciton Emission in a Quasi-Zero-Dimensional Hybrid Lead Halide

Structural dimensionality and electronic dimensionality play a crucial role in determining the type of excitonic emission in hybrid metal halides (HMHs). It is important but challenging to achieve free exciton (FE) emission in zero-dimensional (0D) HMHs based on the control over the electronic dimensionality. In this work, a quasi-0D HMH (C7 H15 N2 Br)2 PbBr4 with localized electronic dimensionality is prepared as a prototype model. With increasing pressure onto (C7 H15 N2 Br)2 PbBr4 , the broad and weak self-trapped exciton (STE) emission at ambient conditions is considerably enhanced before 3.6 GPa, which originates from more distorted [PbBr4 ]2- seesaw units upon compression. Notably, a narrow FE emission in (C7 H15 N2 Br)2 PbBr4 appears at 3.6 GPa, and then this FE emission is gradually strengthened up to 8.4 GPa. High pressure structural characterizations reveal that anisotropic contraction of (C7 H15 N2 Br)2 PbBr4 results in a noticeable reduction in the distance between adjacent [PbBr4 ]2- seesaw units, as well as an obvious enhancement of crystal stiffness. Consequently, the electronic connectivity in (C7 H15 N2 Br)2 PbBr4 is sufficiently promoted above 3.6 GPa, which is also supported with theoretical calculations. The elevation of electronic connectivity and enhanced stiffness together lead to pressure-induced FE emission and subsequent emission enhancement in quasi-0D (C7 H15 N2 Br)2 PbBr4 .

Investigation on broadband emission of two-dimensional melamine lead iodide perovskite (2D-C3H8N6PbI4): An experimental and theoretical approach

Novel two-dimensional melamine lead iodide perovskite (2D-C3H8N6PbI4) is synthesized to investigate its crystallinity, optical band gap and broadband emission properties and to make comparisons with 2D-C3H8N6PbCl4/2D-C3H8N6PbBr4 perovskites. Both experimental and density functional theory (DFT) interrogations on 2D-C3H8N6PbX4 (X = Cl, Br and I) are conducted. The crystal structure, morphology and percentile of Pb and halide elements are confirmed using scanning electron microscope (SEM), and energy dispersive spectrum (EDS), powder/single crystal X-ray diffraction (PXRD/SXRD), DFT and X-ray crystallography simulations. The optical band gaps of 2D-C3H8N6PbX4 perovskites are determined from the Tauc plot fitting of absorbance and DFT studies. Distinct broadband emission of 2D-C3H8N6PbX4 perovskites between 300 and 800 nm is observed, which can be fitted with multiple Gaussian distributions. The fittings of broad PL spectra from 2D-C3H8N6PbCl4/2D-C3H8N6PbBr4 perovskites confirm the involvement of both Dexter energy transfer from melamine cation and self-trapped excitons (STEs). However, the broadband emission of 2D-C3H8N6PbI4 is attributed only to the Dexter energy transfer from melamine cation and the absence of STEs is attributed to the larger lattice deformation of 2D-C3H8N6PbI4. Moreover, the involvement of spin-orbit coupling (SOC) in the energy transfer is clarified to attest that the broadband emission of 2D-C3H8N6PbI4 is distinct among its halide family.

Stereochemically Active Lone Pair Induced Polar Tri-layered Perovskite for Record-Performance Polarized Photodetection

Bulk photovoltaic effect, a promising optoelectronic phenomenon for generating polarized dependent steady-state photocurrent, has been widely applied in various photodetectors. However, incorporating stereochemically active lone pair to construct bulk photovoltage in organic-inorganic hybrid perovskite (OIHP) is still elusive and challenging. Herein, bulk photovoltage (1.2 V) has been successfully achieved by introducing the stereo-chemically active lone pair perovskitizer to construct a polar tri-layered hybrid perovskite, namely, (IBA)2 MHy2 Pb3 Br10 (1, IBA=iso-butylamine, MHy=methylhydrazine). Strikingly, owning to the promising bulk photovoltage, 1-based detectors exhibit an ultra-highly sensitive polarized photodetection (polarization ratio of up to 24.6) under self-powered mode. This ratio surpasses all the reported two-dimension OIHP single-crystal photodetectors. In addition, detectors exhibit outstanding responsivity (≈200 mA W-1 ) and detectivity (≈2.4×1013 Jones). More excitingly, further investigation confirms that lone pair electrons in MHy+ result in the separation of positive and negative charges to produce directional dipoles, which further directional alignment to generate bulk photovoltage, thereby resulting in polarization-dependent photocurrent. Our findings provide a new demonstration for polar multilayer materials' construction and may open opportunities for a host of high-sensitive polarized photodetection.

Intrinsic Ferromagnetic Semiconductors with High Saturation Magnetization from Hybrid Perovskites

Ferromagnetic semiconductors (FMS) enable simultaneous control of both charge and spin transport of charge carriers, and they have emerged as a class of highly desirable but rare materials for applications in spin field-effect transistors and quantum computing. Organic-inorganic hybrid perovskites with high compositional adjustability and structural versatility can offer unique benefits in the design of FMS but has not been fully explored. Here, a series of molecular FMSs based on the 2D organic-inorganic hybrid perovskite structure, namely (2ampy)CuCl4 , (3ampy)CuCl4 , and (4ampy)CuCl4 , is demonstrated, which exhibits high saturation magnetization, dramatic temperature-dependent conductivity change, and tunable ferromagnetic resonance. Magnetic measurements reveal a high saturation magnetization up to 18.56 emu g-1 for (4ampy)CuCl4 , which is one of the highest value among reported hybrid FMSs to date. Conductivity studies of the three FMSs demonstrate that the smaller adjacent octahedron distance in the 2D layer results in higher conductivity. Systematic ferromagnetic resonance investigation shows that the gyromagnetic ratio and Landau factor values are strongly dependent on the types of organic cations used. This work demonstrates that 2D hybrid perovskite materials can simultaneously possess both tunable long-range ferromagnetic ordering and semiconductivity, providing a straightforward strategy for designing and synthesizing high-performance intrinsic FMSs.

Cd2 Nb2 Te4 O15 : A Novel Pseudo-Aurivillius-Type Tellurite with Unprecedented Nonlinear Optical Properties and Excellent Stability

Oxides are emerging candidates for mid-infrared (mid-IR) nonlinear optical (NLO) materials. However, their intrinsically weak second harmonic generation (SHG) effects hinder their further development. A major design challenge is to increase the nonlinear coefficient while maintaining the broad mid-IR transmission and high laser-induced damage threshold (LIDT) of the oxides. In this study, it is reported on a polar NLO tellurite, Cd2 Nb2 Te4 O15 (CNTO), featuring a pseudo-Aurivillius-type perovskite layered structure composed of three types of NLO active groups, including CdO6 octahedra, NbO6 octahedra, and TeO4 seesaws. The uniform orientation of the distorted units induces a giant SHG response that is ≈31 times larger than that of KH2 PO4 , the largest value among all reported metal tellurites. Additionally, CNTO exhibits a large band gap (3.75 eV), a wide optical transparency window (0.33-14.5 µm), superior birefringence (0.12@ 546 nm), high LIDT (23 × AgGaS2 ), and strong acid and alkali resistance, indicating its potential as a promising mid-IR NLO material.

Synergy of 3D and 2D Perovskites for Durable, Efficient Solar Cells and Beyond

Three-dimensional (3D) organic-inorganic lead halide perovskites have emerged in the past few years as a promising material for low-cost, high-efficiency optoelectronic devices. Spurred by this recent interest, several subclasses of halide perovskites such as two-dimensional (2D) halide perovskites have begun to play a significant role in advancing the fundamental understanding of the structural, chemical, and physical properties of halide perovskites, which are technologically relevant. While the chemistry of these 2D materials is similar to that of the 3D halide perovskites, their layered structure with a hybrid organic-inorganic interface induces new emergent properties that can significantly or sometimes subtly be important. Synergistic properties can be realized in systems that combine different materials exhibiting different dimensionalities by exploiting their intrinsic compatibility. In many cases, the weaknesses of each material can be alleviated in heteroarchitectures. For example, 3D-2D halide perovskites can demonstrate novel behavior that neither material would be capable of separately. This review describes how the structural differences between 3D halide perovskites and 2D halide perovskites give rise to their disparate materials properties, discusses strategies for realizing mixed-dimensional systems of various architectures through solution-processing techniques, and presents a comprehensive outlook for the use of 3D-2D systems in solar cells. Finally, we investigate applications of 3D-2D systems beyond photovoltaics and offer our perspective on mixed-dimensional perovskite systems as semiconductor materials with unrivaled tunability, efficiency, and technologically relevant durability.

Synthesis of centimeter-size two-dimensional hybrid perovskite single crystals with tunable, pure, and stable luminescence

The environment-friendly synthesis and property modulation of two-dimensional organic-inorganic halide perovskite (2D OHP) single crystals with large sizes and high quality are important for the fabrication of optoelectric devices. In this work, plate-like and centimeter-size (BA)2Pb(BrxI1-x)4 (BA = n-butylammonium, x: 0-1) single crystals with high crystallinity were synthesized via the cooling crystallization method in a mixed HX (X: I, Br) acid aqueous solution. The synthesized samples were single-phase with homogenously distributed Br and I ions. The lattice structure and bandgap of (BA)2Pb(BrxI1-x)4 were both finely tuned through halide alloying. Pure photoluminescence with unitary wavelength was obtained in the mixed-halide samples compared to those of monohalides (BA)2PbI4 and (BA)2PbBr4. This is attributed to the structural homogeneity of the alloyed crystals. Moreover, the prepared (BA)2Pb(BrxI1-x)4 samples showed higher photo and thermal stability for a long duration even with ion migration. This study will be an important reference for the fabrication and property modulation of 2D OHP-based light-emitting and other optoelectric devices.

Photo- and Thermal-Induced Ion Migration and Phase Separation in Mn-Doped Two-Dimensional PEA2PbX4 Perovskite

Ion migration and phase separation in perovskite materials have negatively affected the solid-state lighting and display. Studying photo- and thermal-induced degradation is considered as a promising approach to understanding the luminescence mechanism and promoting practical applications. Herein, the Mn-doped two-dimensional PEA₂PbX₄ (X = Cl, Br, I) microcrystals with changing halogen composition were synthesized by an acid-assisted post-processing strategy. Then, photo- and thermal-induced degradation was studied by using steady-state and time-resolved photoluminescence (PL) spectroscopy. The band edge exciton PL peak of Mn-doped 2D PEA₂PbX₄ microcrystals was adjusted from 397 to 500 nm. The reduced Mn PL lifetime (1.37 to 0.21 ms) was monitored under ion exchange from Cl to Br to I. The degradation mechanism could be divided into two cases: (i) The halide ion migration in Mn-doped 2D perovskite under continuous illumination was revealed, suggesting that the migration of Cl ions was more accessible than that of Br and I. (ii) The PL redshift and lifetime reduction were observed after annealing at 420 K, which means that thermally induced aggregation of Mn ions resulted in the formation of Mn²⁺-Mn²⁺ dimers. In addition, the experimental results indicated that the induced B-site phase separation at high temperature annealing made the mixed perovskite phase of Pb and Mn ultimately transform into pure PEA₂PbBr₄ and PEA₂MnBr₄.

Design Rules for Obtaining Narrow Luminescence from Semiconductors Made in Solution

Solution-processed semiconductors are in demand for present and next-generation optoelectronic technologies ranging from displays to quantum light sources because of their scalability and ease of integration into devices with diverse form factors. One of the central requirements for semiconductors used in these applications is a narrow photoluminescence (PL) line width. Narrow emission line widths are needed to ensure both color and single-photon purity, raising the question of what design rules are needed to obtain narrow emission from semiconductors made in solution. In this review, we first examine the requirements for colloidal emitters for a variety of applications including light-emitting diodes, photodetectors, lasers, and quantum information science. Next, we will delve into the sources of spectral broadening, including "homogeneous" broadening from dynamical broadening mechanisms in single-particle spectra, heterogeneous broadening from static structural differences in ensemble spectra, and spectral diffusion. Then, we compare the current state of the art in terms of emission line width for a variety of colloidal materials including II-VI quantum dots (QDs) and nanoplatelets, III-V QDs, alloyed QDs, metal-halide perovskites including nanocrystals and 2D structures, doped nanocrystals, and, finally, as a point of comparison, organic molecules. We end with some conclusions and connections, including an outline of promising paths forward.

Two-Dimensional Metal Halides for X-Ray Detection Applications

Metal halide perovskites have recently emerged as promising candidates for the next generation of X-ray detectors due to their excellent optoelectronic properties. Especially, two-dimensional (2D) perovskites afford many distinct properties, including remarkable structural diversity, high generation energy, and balanced large exciton binding energy. With the advantages of 2D materials and perovskites, it successfully reduces the decomposition and phase transition of perovskite and effectively suppresses ion migration. Meanwhile, the existence of a high hydrophobic spacer can block water molecules, thus making 2D perovskite obtain excellent stability. All of these advantages have attracted much attention in the field of X-ray detection. This review introduces the classification of 2D halide perovskites, summarizes the synthesis technology and performance characteristics of 2D perovskite X-ray direct detector, and briefly discusses the application of 2D perovskite in scintillators. Finally, this review also emphasizes the key challenges faced by 2D perovskite X-ray detectors in practical application and presents our views on its future development.

Revealing the Mechanism of Pressure-Induced Emission in Layered Silver-Bismuth Double Perovskites

Pressure-induced emission (PIE) associated with self-trapping excitons (STEs) in low-dimensional halide perovskites has attracted great attention for better materials-by-design. Here, using 2D layered double perovskite (C₆ H₅ CH₂ CH₂ NH₃ ⁺ )₄ AgBiBr₈ as a model system, we advance a fundamental physicochemical mechanism of the PIE from the perspective of carrier dynamics and excited-state behaviors of local lattice distortion. We observed a pressure-driven STE transformation from dark to bright states, corresponding a strong broadband Stokes-shifted emission. Further theoretical analysis demonstrated that the suppressed lattice distortion and enhanced electronic dimensionality in the excited-state play an important role in the formation of stabilized bright STEs, which could manipulate the self-trapping energy and lattice deformation energy to form an energy barrier between the potential energy curves of ground- and excited-state, and enhance the electron-hole orbital overlap, respectively.

Revealing the impact of organic spacers and cavity cations on quasi-2D perovskites via computational simulations

Two-dimensional hybrid lead iodide perovskites based on methylammonium (MA) cation and butylammonium (BA) organic spacer-such as [Formula: see text]-are one of the most explored 2D hybrid perovskites in recent years. Correlating the atomistic profile of these systems with their optoelectronic properties is a challenge for theoretical approaches. Here, we employed first-principles calculations via density functional theory to show how the cation partially canceled dipole moments through the [Formula: see text] terminal impact the structural/electronic properties of the [Formula: see text] sublattices. Even though it is known that at high temperatures, the organic cation assumes a spherical-like configuration due to the rotation of the cations inside the cage, our results discuss the correct relative orientation according to the dipole moments for ab initio simulations at 0 K, correlating well structural and electronic properties with experiments. Based on the combination of relativistic quasiparticle correction and spin-orbit coupling, we found that the MA horizontal-like configuration concerning the inorganic sublattice surface leads to the best relationship between calculated and experimental gap energy throughout n = 1, 2, 3, 4, and 5 number of layers. Conversely, the dipole moments cancellation (as in BA-MA aligned-like configuration) promotes the closing of the gap energies through an electron depletion mechanism. We found that the anisotropy [Formula: see text] isotropy optical absorption conversion (as a bulk convergence) is achieved only for the MA horizontal-like configuration, which suggests that this configuration contribution is the majority in a scenario under temperature effects.

Enhanced Luminescence of Dye-Decorated ZIF-8 Composite Films via Controllable D-A Interactions for White Light Emission

Metal-organic frameworks (MOFs) constructed by metal ions/clusters and organic linkers are used to encapsulate fluorescent guest species with aggregation-caused quenching (ACQ) effects to enhance fluorescence properties due to their porous structures and high specific surface areas. However, there would be a problem of matching between MOF pores and guest molecules' sizes. In this paper, amorphous ZIF-8 was modified by carboxyl functional groups (H₃BTC-ZIF-8) via introducing the 1,2,4-benzenetricarbonic acid (H₃BTC) ligand into the ZIF-8 sol system. Moreover, H₃BTC-ZIF-8 was used for the loading of organic fluorescent dyes rhodamine 6G (R6G) and coumarin 151 (C151) to prepare R6G/C151/H₃BTC-ZIF-8 composite films. A white-light-emitting composite film (R6G/C151/H₃BTC-ZIF-8) with CIE coordinates of (0.323, 0.347) was successfully prepared by compounding fluorescent dyes (R6G and C151) with H₃BTC-modified ZIF-8, whose photoluminescence quantum yield (PLQY) can reach 64.0%. It was higher than the PLQY of the composite films prepared by crystalline ZIF-8 (40.2%) or amorphous ZIF-8 without H₃BTC (48.0%) compounded with the same concentrations of dyes. The fluorescence enhancement was probably attributed to an increased amount of active sites of H₃BTC-modified ZIF-8 interacting with dyes C151 and R6G. This can form hydrogen bonds between H₃BTC-ZIF-8 and C151, and weak electron donor-acceptor (D-A) interactions between H₃BTC-ZIF-8 and R6G molecules, respectively, thus enhancing the interactions between dyes and ZIF-8 and reducing the ACQ effect existing between dye molecules. Therefore, this strategy could provide an important guidance to develop white-light-emissive materials.

Pressure-Tuned Multicolor Emission of 2D Lead Halide Perovskites with Ultrahigh Color Purity

The chemical diversity and structural flexibility of lead halide perovskites (LHPs) offer tremendous opportunities to tune their optical properties through internal molecular engineering and external stimuli. Herein, we report the wide-range and ultrapure photoluminescence emissions in a family of homologous 2D LHPs, [MeOPEA]₂ PbBr_4-4x I_4x (MeOPEA=4-methoxyphenethylammonium; x=0, 0.2, 0.425, 0.575, 1) enabled through internal chemical pressure and external hydrostatic pressure. The chemical pressure, induced by the C-H⋅⋅⋅π interactions and halogen doping/substitution strengthens the structural rigidity to give sustained narrow emissions, and regulates the emission energy, respectively. Further manipulation of physical pressure leads to wide-range emission tuning from 412 to 647 nm in a continuous and reversible manner. This work could open up new pathways for developing 2D LHP emitters with ultra-wide color gamut and high color purity which are highly useful for pressure sensing.

Rapid Interlayer Charge Separation and Extended Carrier Lifetimes due to Spontaneous Symmetry Breaking in Organic and Mixed Organic-Inorganic Dion-Jacobson Perovskites

Promising alternatives to three-dimensional perovskites, two-dimensional (2D) layered metal halide perovskites have proven their potential in optoelectronic applications due to improved photo- and chemical stability. Nevertheless, photovoltaic devices based on 2D perovskites suffer from poor efficiency owing to unfavorable charge carrier dynamics and energy losses. Focusing on the 2D Dion-Jacobson perovskite phase that is rapidly rising in popularity, we demonstrate that doping of complementary cations into the 3-(aminomethyl)piperidinium perovskite accelerates spontaneous charge separation and slows down charge recombination, both factors improving the photovoltaic performance. Employing ab initio nonadiabatic (NA) molecular dynamics combined with time-dependent density functional theory, we demonstrate that cesium doping broadens the bandgap by 0.4 eV and breaks structural symmetry. Assisted by thermal fluctuations, the symmetry breaking helps to localize electrons and holes in different layers and activates additional vibrational modes. As a result, the charge separation is accelerated. Simultaneously, the charge carrier lifetime grows due to shortened coherence time between the ground and excited states. The established relationships between perovskite composition and charge carrier dynamics provide guidelines toward future material discovery and design of perovskite solar cells.

Recent progress in layered metal halide perovskites for solar cells, photodetectors, and field-effect transistors

Metal halide perovskite materials demonstrate immense potential for photovoltaic and electronic applications. In particular, two-dimensional (2D) layered metal halide perovskites have advantages over their 3D counterparts in optoelectronic applications due to their outstanding stability, structural flexibility with a tunable bandgap, and electronic confinement effect. This review article first analyzes the crystallography of different 2D perovskite phases [the Ruddlesden-Popper (RP) phase, the Dion-Jacobson (DJ) phase, and the alternating cations in the interlayer space (ACI) phase] at the molecular level and compares their common electronic properties, such as out-of-plane conductivity, crucial to vertical devices. This paper then critically reviews the recent development of optoelectronic devices, namely solar cells, photodetectors and field effect transistors, based on layered 2D perovskite materials and points out their limitations and potential compared to their 3D counterparts. It also identifies the important application-specific future research directions for different optoelectronic devices providing a comprehensive view guiding new research directions in this field.

Toward Efficient Two-Photon Circularly Polarized Light Detection through Cooperative Strategies in Chiral Quasi-2D Perovskites

Organic-inorganic hybrid perovskites carry unique semiconducting properties and advanced flexible crystal structures. These characteristics of organic-inorganic hybrid perovskites create a promising candidacy for circularly polarized light (CPL) detection. However, CPL detections based on chiral perovskites are limited to UV and visible wavelengths. The natural quantum well structures of layered hybrid perovskites generate strong light-matter interactions. This makes it possible to achieve near-infrared (NIR) CPL detection via two-photon absorption in the sub-wavelength region. In this study, cooperative strategies of dimension increase and mixed spacer cations are used to obtain a pair of chiral multilayered perovskites (R-β-MPA)EA₂ Pb₂ Br₇ and (S-β-MPA)EA₂ Pb₂ Br₇ (MPA = methylphenethylammonium and EA = ethylammonium). The distinctive bi-cations interlayer and multilayered inorganic skeletons provide enhanced photoconduction. Moreover, superior photoconduction leads to the prominent NIR CPL response with a responsivity up to 8.1 × 10^-5 A W^-1 . It is anticipated that this work can serve as a benchmark for the fabrication and optimization of efficient NIR CPL detection by simple chemical design.

(C5N2H14)GeBr4: A 2D Organic Germanium Bromide Perovskite with Strong Orange Photoluminescence Properties

Hybrid organic-inorganic metal halide (OIMH) perovskites are regarded as potential photoluminescent (PL) materials and have attracted intensive attention. Here, we select 1-methylpiperazine as an organic component and successfully obtain a two-dimensional (2D) Ge-based OIMH perovskite, (1-mpz)GeBr₄. It features a 2D layered structure composed of distorted [GeBr₆]^4- octahedra with organic (C₅H₁₄N₂)²⁺ located between the layers. (1-mpz)GeBr₄ exhibits strong orange color under ultraviolet (UV) light and possesses good PL stability for over 2 months. The photoluminescence quantum efficiency is measured to be 7.15% at room temperature, which is the largest among all reported low-dimensional Ge-based perovskites. Experimental measurements, combined with first-principles calculations, reveal that its PL property is attributed to self-trapped excitons (STEs) from [GeBr₆]^4- groups. From the deduced structure-property relationship, Ge-based OIMH PL perovskites with good stability and high PL efficiency can be expected.

Interfacial engineering of halide perovskites and two-dimensional materials

Recently, halide perovskites (HPs) and layered two-dimensional (2D) materials have received significant attention from industry and academia alike. HPs are emerging materials that have exciting photoelectric properties, such as a high absorption coefficient, rapid carrier mobility and high photoluminescence quantum yields, making them excellent candidates for various optoelectronic applications. 2D materials possess confined carrier mobility in 2D planes and are widely employed in nanostructures to achieve interfacial modification. HP/2D material interfaces could potentially reveal unprecedented interfacial properties, including light absorbance with desired spectral overlap, tunable carrier dynamics and modified stability, which may lead to several practical applications. In this review, we attempt to provide a comprehensive perspective on the development of interfacial engineering of HP/2D material interfaces. Specifically, we highlight the recent progress in HP/2D material interfaces considering their architectures, electronic energetics tuning and interfacial properties, discuss the potential applications of these interfaces and analyze the challenges and future research directions of interfacial engineering of HP/2D material interfaces. This review links the fields of HPs and 2D materials through interfacial engineering to provide insights into future innovations and their great potential applications in optoelectronic devices.

Factors influencing self-trapped exciton emission of low-dimensional metal halides

In this review, we mainly summarized the structure distortion, molecular engineering, electron–phonon coupling effect, external temperature and pressure, and metal ion doping that influence the self-trapped exciton emission of low-dimensional metal halides (LDMHs).

Excitation-Dependent Tunable White Light of ns2 Ions Doped Rb2SnCl6 Vacancy Ordered Double Perovskite

Single-matrix white light-emitting diodes are still a challenge. Achieving tunable white light emission from lead-free perovskites attracts much attention. Herein, nanoscale Rb₂SnCl₆ (RSC) vacancy ordered double perovskite were synthesized by an optimized precipitation method. Further, using ns² ions (Bi³⁺, Te⁴⁺, and Sb³⁺) doped RSC vacancy ordered double perovskite to obtain broadband blue, yellow-green, and orange-red emission. The color temperature adjustable high-quality white light emission based on the codoping strategy is obtained by controlling the doping ratio of Bi³⁺ and Te⁴⁺. Additionally, the white light-emitting diodes encapsulated by this single matrix white luminescent material exhibit excellent stability. Combined with theoretical calculations, it is elucidated that these high-efficiency emissions are not only derived from the unique electronic transition of ns² ions but also related to the energy band properties and the crystal field. This work shows that ns² ions doped RSC vacancy ordered double perovskite can meet the needs of different luminous colors and color temperature tunable white light emission. Meanwhile, it is a strong competitor to replace the lead-based perovskite.

Self-trapped excitons in soft semiconductors

Self-trapped excitons (STEs) have attracted tremendous attention due to their intriguing properties and potential optoelectronic applications. STEs are formed from the lattice distortion induced by the strong electron (exciton)-phonon coupling in soft semiconductors upon photoexcitation, which features in broadband photoluminescence (PL) emission spectra with a large Stokes shift. Recently, significant progress has been achieved in this field but many remain challenges that need to be solved, including the understanding of the underlying physical mechanism, tuning of the performance, and device applications. Along these lines, for the first time, systematic experimental characterizations and advanced theoretical calculations are presented in this review to shed light on the physical mechanism. The possibility of tuning the STEs through multiple degrees of freedom is also presented, along with an overview of the STE-based emerged applications and future research perspectives.

Structural Descriptors to Correlate Pb Ion Displacement and Broadband Emission in 2D Halide Perovskites

2D hybrid lead halide perovskites exhibit versatile photoluminescent behaviors for narrowband to broadband emissions (BBEs) and have become attractive candidates for potential applications such as solid-state lighting. Establishing the relationship between the perovskite structural distortion and BBE is key but challenging in designing and optimizing the perovskite luminophores. Conventional attention is given to analyzing the intra-octahedron distortion of the [PbX₆]^4- (X = halide) unit that has not yet provided a clear structure-luminescence relationship. Herein, we introduce a descriptor, Pb displacement, to describe the inter-octahedron distortion to clarify the structure-emission relationship. The displacement of adjacent Pb centers represents the lattice distortion, which determines the broadband/narrowband emission instead of the octahedron distortion itself. We find a kite-type quadrilateral rule in (001) type 2D perovskites, that is, the degree to which the four octahedral central ions deviate from a square relates to the BBE. The kite-type arrangement of the Pb ions usually corresponds to the BBEs due to the large structure distortions. In contrast, the square-type arrangement of the Pb ions corresponds to the narrowband emissions because of the small distortions. The distortion descriptor magnifies the distortion scale, making it larger than the conventional one for the intra-octahedron distortion, which matches the general concept of excitons based on the scale of the crystal lattice. Therefore, the set of structural descriptors is better to correlate the perovskite structures and emission properties.

Stereochemically Active Lone Pairs and Nonlinear Optical Properties of Two-Dimensional Multilayered Tin and Germanium Iodide Perovskites

Two-dimensional (2D) metal halide perovskites are promising tunable semiconductors. Previous studies have focused on Pb-based structures, whereas the multilayered Sn- and Ge-based analogues are largely unexplored, even though they potentially exhibit more diverse structural chemistry and properties associated with the more polarizable ns² lone-pair electrons. Herein, we report the synthesis and structures of 2D tin iodide perovskites (BA)₂(A)Sn₂I₇, where BA = n-butylammonium and A = methylammonium, formamidinium, dimethylammonium, guanidinium, or acetamidinium, and those of 2D germanium iodide perovskites (BA)₂(A)Ge₂I₇, where A = methylammonium or formamidinium. By comparing these structures along with their Pb counterparts, we establish correlations between the effect of group IV-cation's lone-pair stereochemical activity on the perovskite crystal structures and the resulting semiconducting properties such as bandgaps and carrier-phonon interactions and nonlinear optical properties. We find that the strength of carrier-phonon interaction increases with increasing lone-pair activity, leading to a more prominent photoluminescence tail on the low-energy side. Moreover, (BA)₂(A)Ge₂I₇ exhibit strong second harmonic generation with second-order nonlinear coefficients of ∼10 pm V^-1 that are at least 10 times those of Sn counterparts and 100 times those of Pb counterparts. We also report the third-order two-photon absorption coefficients of (BA)₂(A)Sn₂I₇ to be ∼10 cm MW^-1, which are one order of magnitude larger than those of the Pb counterparts and traditional inorganic semiconductors. These results not only highlight the role of lone-pair activity in linking the compositions and physical properties of 2D halide perovskites but also demonstrate 2D tin and germanium iodide perovskites as promising lead-free alternatives for nonlinear optoelectronic devices.

Organic Cation-Directed Modulation of Emissions in Zero-Dimensional Hybrid Tin Bromides

Zero-dimensional hybrid metal halides (0D HMHs) are attractive due to their intriguing self-trapped exciton (STE) emission properties. However, the effect of organic cations on the emission of 0D HMHs is relatively underexplored. Herein, we report two types of 0D hybrid tin bromides, (BMe)₂SnBr₆ (BMe = C₈N₂H₁₈) and (MeH)₂SnBr₆ (MeH = C₇N₂H₁₆), which share similar structural features with different hydrogen bonding (HB) interactions between [SnBr₆]^4- anions and organic cations. The (BMe)₂SnBr₆ with weak HB interactions exhibits only STE emission, while the (MeH)₂SnBr₆ exhibits both STE and charge transfer exciton emissions owing to the strong HB interactions, resulting in an excitation-dependent emission at cryogenic conditions. Detailed structural analyses and Hirshfeld surface calculations confirm that the enhanced HB interactions are essential to obtain the multiple emissions in (MeH)₂SnBr₆.

Highly Stable and Moisture-Immune Monocomponent White Perovskite Phosphor by Trifluoromethyl (-CF3) Regulation

Halide perovskites are emerging as promising candidates for white light solid state lighting. Nevertheless, there are still challenges of a high water stability, a tunable color temperature, and a high photoluminescence quantum yield (PLQY). Herein, we report hydrophobic, electron-withdrawing trifluoromethyl (-CF₃)-modified phenethylamine lead bromide (PEA₂PbBr₄) with ultrahigh stability in water for >2 months, and the broadband white light emission is illustrated by self-trapped excitons attributed to exciton-phonon coupling that coordinate molecular vibration, lattice distortion, and electrostatic interaction. In particular, by Mn²⁺ doping, the emission color can be tuned from cold (10237 K) to warm (2406 K), and a greatly enhanced PLQY of ≤87.93% can be achieved. Furthermore, the perovskites also possess an excellent color rendering index (the highest is 94). A monocomponent white light-emitting diode with amazing CIE 1931 coordinates of (0.33, 0.32) is further assembled, demonstrating a luminance of 471.5 cd m^-2 at 50 mA and good long-term operation stability after >2 months. This study of highly efficient and stable perovskites with high-quality white light emission will open up new opportunities in solid state lighting.

Photoluminescent Properties of Two-Dimensional Manganese(II)-Based Perovskites with Different-Length Arylamine Cations

The participation of organic cations plays an important role in tuning broad-spectra emissions. Herein, we synthesized a series of Mn(II)-based two-dimensional (2D) halide perovskites with arylamine cations of different lengths having the general formula (C₆H₅(CH₂)_xNH₃)₂MnCl₄ (x = 1-4), with the x = 4 compound reported here for the first time. With the increase in the -(CH₂)- in organic cations, the distance between adjacent inorganic layers increases, causing the title compounds to exhibit different structural distortions. As the Mn-Cl-Mn angular distortion increases, the experimental optical band gaps of the title compounds increase correspondingly. When the angle distortion between the octahedrons of the compounds is similar, the band gaps may also be affected by the distortion of the octahedron itself (the bond-length distortion of 2 is greater than that of 4). Under UV-light irradiation at 298 K, all of the compounds exhibit two emission peaks centered at 480-505 and 610 nm, corresponding to the organic-cation emission and the ⁴T₁(G) to ⁶A₁(S) radiative transition of Mn²⁺ ions, respectively. Among these title compounds, (PPA)₂MnCl₄ [(PPA)⁺ = C₆H₅(CH₂)₃NH₃⁺] exhibits the strongest photoluminescence (PL). The study of the title compounds contributes to an in-depth understanding of the relationship between the structural distortion and optical properties of 2D Mn(II)-based perovskite materials.

Understanding Electron-Phonon Interactions in 3D Lead Halide Perovskites from the Stereochemical Expression of 6s2 Lone Pairs

The electron-phonon (e-ph) interaction in lead halide perovskites (LHPs) plays a role in a variety of physical phenomena. Unveiling how the local lattice distortion responds to charge carriers is a critical step toward understanding the e-ph interaction in LHPs. Herein, we advance a fundamental understanding of the e-ph interaction in LHPs from the perspective of stereochemical activity of 6s² lone-pair electrons on the Pb²⁺ cation. We demonstrate a model system based on three LHPs with distinctive lone-pair activities for studying the structure-property relationships. By tuning the A-cation chemistry, we synthesized single-crystal CsPbBr₃, (MA_0.13EA_0.87)PbBr₃ (MA⁺ = methylammonium; EA⁺ = ethylammonium), and (MHy)PbBr₃ (MHy⁺ = methylhydrazinium), which exhibit stereo-inactive, dynamic stereo-active, and static stereo-active lone pairs, respectively. This gives rise to distinctive local lattice distortions and low-frequency vibrational modes. We find that the e-ph interaction leads to a blue shift of the band gap as temperature increases in the structure with the dynamic stereo-active lone pair but to a red shift in the structure with the static stereo-active lone pair. Furthermore, analyses of the temperature-dependent low-energy photoluminescence tails reveal that the strength of the e-ph interaction increases with increasing lone-pair activity, leading to a transition from a large polaron to a small polaron, which has significant influence on the emission spectra and charge carrier dynamics. Our results highlight the role of the lone-pair activity in controlling the band gap, phonon, and polaronic effect in LHPs and provide guidelines for optimizing the optoelectronic properties, especially for tin-based and germanium-based halide perovskites, where stereo-active lone pairs are more prominent than their lead counterparts.

Engineering van der Waals Materials for Advanced Metaphotonics

The outstanding chemical and physical properties of 2D materials, together with their atomically thin nature, make them ideal candidates for metaphotonic device integration and construction, which requires deep subwavelength light-matter interaction to achieve optical functionalities beyond conventional optical phenomena observed in naturally available materials. In addition to their intrinsic properties, the possibility to further manipulate the properties of 2D materials via chemical or physical engineering dramatically enhances their capability, evoking new science on light-matter interaction, leading to leaped performance of existing functional devices and giving birth to new metaphotonic devices that were unattainable previously. Comprehensive understanding of the intrinsic properties of 2D materials, approaches and capabilities for chemical and physical engineering methods, the resulting property modifications and novel functionalities, and applications of metaphotonic devices are provided in this review. Through reviewing the detailed progress in each aspect and the state-of-the-art achievement, insightful analyses of the outstanding challenges and future directions are elucidated in this cross-disciplinary comprehensive review with the aim to provide an overall development picture in the field of 2D material metaphotonics and promote rapid progress in this fast emerging and prosperous field.

Anomalous and colossal thermal expansion, photoluminescence, and dielectric properties in lead halide-layered perovskites with cyclohexylammonium and cyclopentylammonium cations

A detailed study of lead halide-layered perovskites with general formula A2PbX4 (where A is cyclohexylammonium (CHA) or cyclopentylammonium (CPA) cation and X is Cl- or Br- anion) is presented. Using variable temperature synchrotron X-ray powder diffraction, we observe that these compounds exhibit diverse crystal structures above room temperature. Very interestingly, we report some unconventional thermomechanical responses such as uniaxial negative thermal expansion and colossal positive thermal expansion in a perpendicular direction. For the polymorphs of (CHA)2PbBr4, the volumetric thermal expansion coefficient is among the highest reported for any extended inorganic crystalline solid, reaching 480 MK-1. The phase transitions are confirmed by calorimetry and dielectric measurements, where the dielectric versus temperature curves show anomalies related with the order-disorder phase transitions. In addition, these compounds exhibit a broad photoluminescence (PL) emission with a large Stokes shift, which is related with an exciton PL emission.

High-Throughput Evaluation of Emission and Structure in Reduced-Dimensional Perovskites

High-throughput experimentation (HTE) seeks to accelerate the exploration of materials space by uniting robotics, combinatorial methods, and parallel processing. HTE is particularly relevant to metal halide perovskites (MHPs), a diverse class of optoelectronic materials with a large chemical space. Here we develop an HTE workflow to synthesize and characterize light-emitting MHP single crystals, allowing us to generate the first reported data set of experimentally derived photoluminescence spectra for low-dimensional MHPs. We leverage the accelerated workflow to optimize the synthesis and emission of a new MHP, methoxy-phenethylammonium lead iodide ((4-MeO-PEAI)₂-PbI₂). We then synthesize 16 000 MHP single crystals and measure their photoluminescence to study the effects of synthesis parameters and compositional engineering on the emission intensity of 54 distinct MHPs: we achieve an acceleration factor of more than 100 times over previously reported HTE MHP synthesis and characterization methods. Using insights derived from this analysis, we screen an existing database for new, potentially emissive MHPs. On the basis of the Tanimoto similarity of the bright available emitters, we present our top candidates for future exploration. As a proof of concept, we use one of these (3,4-difluorophenylmethanamine) to synthesize an MHP which we find has a photoluminescence quantum yield of 10%.

cis/trans-Isomeric Cation Tuning Photoluminescence and Photodetection in 2D Perovskites

Cationic components in the organic-inorganic hybrid perovskites (OIHPs) play an important role in the arrangement and tilting of the inorganic part that is responsible for semiconducting, luminescent, and photoelectronic properties. Herein, we report two 2D OIHP compounds, (cis-4ACHO)₂(H₃OBr)PbBr₄ (1) and (trans-4ACHO)₂(H₃OCl)PbBr₄ (2) (4ACHO = 4-aminocyclohexanol), showing both photoluminescence (PL) and photodetection (PD) that are tuned by the cis- and trans configurational isomerism of 4ACHO. Crystals of 1 and 2 exhibit similar packing structures but with different crystallographic symmetries. Compound 2 displays a broadband white-light emission with a higher PL efficiency (6.6%) than 1 (2.1%) that emits narrowband blue light while the PD property of 1 is better than 2 with a higher on/off ratio under the same conditions. The PL and PD of the two compounds show a seesaw relationship, which provides a new perspective for understanding the PL and PD properties in OIHPs.

Aziridinium cation templating 3D lead halide hybrid perovskites

This study describes the synthesis of the first aziridinium-based compounds, namely hybrid perovskites (AzrH)PbHal₃ (where AzrH = aziridinium, Hal = Cl, Br or I). This highly reactive species was stabilized in 3D lead halide frameworks and was found to be a small enough organic cation to promote the formation of semiconducting organo-inorganic materials.

From Structural Design to Functional Construction: Amine Molecules in High-Performance Formamidinium-Based Perovskite Solar Cells

Formamidinium (FA) based perovskites are considered as one of the most promising light-absorbing perovskite materials owing to their narrower band gap and better thermal stability compared to conventional methylammonium-based perovskites. Constant improvement by using various additives stimulates the potential application of these perovskites. Amine molecules with different structures have been widely used as typical additives in FA-based perovskite solar cells, and decent performances have been achieved. Thus, a systematic review focusing on structural regulation and functional construction of amines in FA-based perovskites is of significance. Herein, we analyze the construction mechanism of different structural amines on the functional perovskite crystals. The influence of amine molecules on specific perovskite properties including defect conditions, charge transfer, and moisture resistance are evaluated. Finally, we summarize the design rules of amine molecules for the application in high-performance FA-based perovskites and propose directions for the future development of additive molecules.

Tailoring Photophysical Dynamics in a Hybrid Gallium-Bismuth Heterometallic Halide by Transferring from an Indirect to a Direct Band Structure

Low-dimensional lead-free metal halides have emerged as novel luminous materials for solid-state lighting, remote thermal imaging, X-ray scintillation, and anticounterfeiting labeling applications. However, the influence of band structure on the intriguing optical property has rarely been explored, especially for low-dimensional hybrid heterometallic halides. In this study, we have developed a lead-free zero-dimensional gallium-bismuth hybrid heterometallic halide, A₈(GaCl₄)₄(BiCl₆)₄ (A = C₈H₂₂N₂), that is photoluminescence (PL)-inert because of its indirect-band-gap character. Upon rational composition engineering, parity-forbidden transitions associated with the indirect band gap have been broken by replacing partial Ga³⁺ with Sb³⁺, which contains an active outer-shell 5s² lone pair, resulting in a transition from an indirect to a direct band gap. As a result, broadband yellow PL centered at 580 nm with a large Stokes shift over 200 nm is recorded. Such an emission is attributed to the radiative recombination of an allowed direct transition from triplet ³P₁ states of Sb³⁺ based on experimental characterizations and theoretical calculations. This study provides not only important insights into the effect of the band structure on the photophysical properties but a guidance for the design of new hybrid heterometallic halides for optoelectronic applications.

High-Performance Sulfate Optical Materials Exhibiting Giant Second Harmonic Generation and Large Birefringence

Discovering novel sulfate optical materials with strong second-harmonic generation (SHG) and large birefringence is confronted by a great challenge attributed to the intrinsically weak polarizability and optical anisotropy of tetrahedral SO₄ groups. Herein, two superior-performing sulfate optical materials, namely, noncentrosymmetric Hg₃ O₂ SO₄ and centrosymmetric CsHgClSO₄  ⋅ H₂ O, have been successfully synthesized through the introduction of a highly polarizable d¹⁰ metal cation, Hg²⁺ . The unique component layers in the reported compounds, [Hg₃ O₂ SO₄ ]_∞ layers in Hg₃ O₂ SO₄ and [HgClSO₄ (H₂ O)] ∞ - layers in CsHgClSO₄  ⋅ H₂ O, induce enlarged birefringence in each sulfate. Remarkably, Hg₃ O₂ SO₄ exhibits a very large SHG response (14 times that of KH₂ PO₄ ), which is the strongest efficiency among all the reported nonlinear optical sulfates. Detailed theoretical calculations confirm that the employment of highly polarizable Hg²⁺ is an effective strategy to design superior optical materials with large birefringence and strong SHG response.

Stabilization of Metastable Halide Perovskite Lattices in the 2D Limit

Metal halide perovskites constitute a new class of semiconductors that are structurally tailorable, exhibiting rich structural polymorphs. In this perspective, the polymorphism in lead halide perovskites is described-a material system currently used for high-performance photovoltaics and optoelectronics. Strategies for stabilizing the metastable perovskite polymorphs based on crystal size reduction and surface functionalization are critically reviewed. Focus is on an unprecedented stabilization of metastable perovskite lattices in the 2D limit (e.g., with a thickness down to a few unit cells) due to the dominance of surface effects. This stabilization allows the incorporation of various A-cations that deemed oversized for 3D perovskites into the 2D perovskite lattices, which bring new insights on the relationships between the crystal structures and optoelectronic properties and lead to emergent ferroelectricity in halide perovskites. A comprehensive understanding is provided on how the A-cations influence the structural, optoelectronic, and ferroelectric properties, with an emphasis on the second order Jahn-Teller distortion caused by the oversized A-cations. Finally, future perspectives on new structure exploration and studies of fundamental photophysical properties using stabilized perovskite lattices are provided.