Active Site Revealed for Water Oxidation on Electrochemically Induced δ-MnO2: Role of Spinel-to-Layer Phase Transition

Thermodynamically spontaneously intercalated H3O+ enables LiMn2O4 with enhanced proton tolerance in aqueous batteries

LiMn2O4 (LMO) is an attractive positive electrode material for aqueous lithium-ion batteries (ALIBs), but its inferior cycle performance limits the practical application. The degradation mechanism of LMO in ALIBs is still unclear, resulting in inability to predictably improve its structural stability. The electrode/electrolyte interface is believed to play an important role in electrode degradation. However, the interactions of the water-containing electrode/electrolyte interface of LMO are underexplored. In this work, we demonstrate the insertion of H3O+ into LMO during cycling in aqueous electrolyte and elucidate the paradoxical effects of H3O+. The crystal H3O+ enhances the structural stability of LMO by forming a gradient Mn4+-rich protective shell, but an excess amount of crystal H3O+ leads to poor Li+ conductivity, resulting in rapid capacity fading. Combining electrochemical analyses, structural characterizations, and first-principles calculations, we reveal the intercalation of H3O+ into LMO and its associated mechanism on the structural evolution of LMO. Furthermore, we regulate the crystal H3O+ content in LMO by modifying the hydrogen bond networks of aqueous electrolyte to restrict H2O molecule activity. This approach utilizes an appropriate amount of crystal H3O+ to enhance the structural stability of LMO while maintaining sufficient Li+ diffusion.

Electrochemical Failure Mechanism of δ-MnO2 in Zinc Ion Batteries Induced by Irreversible Layered to Spinel Phase Transition

Phase transitions of Mn-based cathode materials associated with the charge and discharge process play a crucial role on the rate capability and cycle life of zinc ion batteries. Herein, a microscopic electrochemical failure mechanism of Zn-MnO2 batteries during the phase transitions from δ-MnO2 to λ-ZnMn2O4 is presented via systematic first-principle investigation. The initial insertion of Zn2+ intensifies the rearrangement of Mn. This is completed by the electrostatic repulsion and co-migration between guest and host ions, leading to the formation of λ-ZnMn2O4. The Mn relocation barrier for the λ-ZnMn2O4 formation path with 1.09 eV is significantly lower than the δ-MnO2 re-formation path with 2.14 eV, indicating the irreversibility of the layered-to-spinel transition. Together with the phase transition, the rearrangement of Mn elevates the Zn2+ migration barrier from 0.31 to 2.28 eV, resulting in poor rate performance. With the increase of charge-discharge cycles, irreversible and inactive λ-ZnMn2O4 products accumulate on the electrode, causing continuous capacity decay of the Zn-MnO2 battery.

The Promising Seesaw Relationship Between Activity and Stability of Ru-Based Electrocatalysts for Acid Oxygen Evolution and Proton Exchange Membrane Water Electrolysis

The development of electrocatalysts that are not reliant on iridium for efficient acid-oxygen evolution is a critical step towards the proton exchange membrane water electrolysis (PEMWE) and green hydrogen industry. Ruthenium-based electrocatalysts have garnered widespread attention due to their remarkable catalytic activity and lower commercial price. However, the challenge lies in balancing the seesaw relationship between activity and stability of these electrocatalysts during the acid-oxygen evolution reaction (OER). This review delves into the progress made in Ru-based electrocatalysts with regards to acid OER and PEMWE applications. It highlights the significance of customizing the acidic OER mechanism of Ru-based electrocatalysts through the coordination of adsorption evolution mechanism (AEM) and lattice oxygen oxidation mechanism (LOM) to attain the ideal activity and stability relationship. The promising tradeoffs between the activity and stability of different Ru-based electrocatalysts, including Ru metals and alloys, Ru single-atomic materials, Ru oxides, and derived complexes, and Ru-based heterojunctions, as well as their applicability to PEMWE systems, are discussed in detail. Furthermore, this paper offers insights on in situ control of Ru active sites, dynamic catalytic mechanism, and commercial application of PEMWE. Based on three-way relationship between cost, activity, and stability, the perspectives and development are provided.

Avoiding Sabatier's Limitation on Spatially Correlated Pt-Mn Atomic Pair Sites for Oxygen Electroreduction

The development of highly active and low-cost oxygen reduction reaction (ORR) catalysts is crucial for the practical application of hydrogen fuel cells. However, the linear scaling relation (LSR) imposes an inherent Sabatier's limitation for most catalysts including the benchmark Pt with an insurmountable overpotential ceiling, impeding the development of efficient electrocatalysts. To avoid such a limitation, using earth-abundant metal oxides with different crystal phases as model materials, we propose an effective and dynamic reaction pathway through constructing spatially correlated Pt-Mn pair sites, achieving an excellent balance between high activity and low Pt loading. Experimental and theoretical calculations demonstrate that manipulating the intermetallic distance and charge distribution of Pt-Mn pairs can effectively promote O-O bond cleavage at these sites through a bridge configuration, circumventing the formation of *OOH intermediates. Meanwhile, the dynamic adsorption configuration transition from the bridge configuration of O2 to the end-on configuration of *OH improves *OH desorption at the Mn site within such pairs, thereby avoiding Sabatier's limitation. The well-designed Pt-Mn/β-MnO2 exhibits outstanding ORR activity and stability with a half-wave potential of 0.93 V and barely any activity degradation for 70 h. When applied to the cathode of a H2-O2 anion-exchange membrane fuel cell, this catalyst demonstrates a high peak power density of 287 mW cm-2 and 500 h of stability under a cell voltage of 0.6 V. This work reveals the adaptive bonding interactions of atomic pair sites with multiple reactant/intermediates, offering a new avenue for rational design of highly efficient atomic-level dispersed ORR catalysts beyond the Sabatier optimum.

Reversible Cl/Cl- redox in a spinel Mn3O4 electrode

A unique prospect of using halides as charge carriers is the possibility of the halides undergoing anodic redox behaviors when serving as charge carriers for the charge-neutrality compensation of electrodes. However, the anodic conversion of halides to neutral halogen species has often been irreversible at room temperature due to the emergence of diatomic halogen gaseous products. Here, we report that chloride ions can be reversibly converted to near-neutral atomic chlorine species in the Mn3O4 electrode at room temperature in a highly concentrated chloride-based aqueous electrolyte. Notably, the Zn2+ cations inserted in the first discharge and trapped in the Mn3O4 structure create an environment to stabilize the converted chlorine atoms within the structure. Characterization results suggest that the Cl/Cl- redox is responsible for the observed large capacity, as the oxidation state of Mn barely changes upon charging. Computation results corroborate that the converted chlorine species exist as polychloride monoanions, e.g., [Cl3]- and [Cl5]-, inside the Zn2+-trapped Mn3O4, and the presence of polychloride species is confirmed experimentally. Our results point to the halogen plating inside electrode lattices as a new charge-storage mechanism.

Electrocatalytic Mechanism of Defect in Spinels for Water and Organics Oxidation

Spinels display promising electrocatalytic ability for oxygen evolution reaction (OER) and organics oxidation reaction because of flexible structure, tunable component, and multifold valence. Unfortunately, limited exposure of active sites, poor electronic conductivity, and low intrinsic ability make the electrocatalytic performance of spinels unsatisfactory. Defect engineering is an effective method to enhance the intrinsic ability of electrocatalysts. Herein, the recent advances in defect spinels for OER and organics electrooxidation are reviewed. The defect types that exist in spinels are first introduced. Then the catalytic mechanism and dynamic evolution of defect spinels during the electrochemical process are summarized in detail. Finally, the challenges of defect spinel electrocatalysts are brought up. This review aims to deepen the understanding about the role and evolution of defects in spinel for electrochemical water/organics oxidation and provide a significant reference for the design of efficient defect spinel electrocatalysts.

Peroxymonosulfate-Activation-Induced Phase Transition of Mn3O4 Nanospheres on Nickel Foam with Enhanced Catalytic Performance

The transformations of physicochemical properties on manganese oxides during peroxymonosulfate (PMS) activation are vital factors to be concerned. In this work, Mn₃O₄ nanospheres homogeneously loaded on nickel foam are prepared, and the catalytic performance for PMS activation is evaluated by degrading a target pollutant, Acid Orange 7, in aqueous solution. The factors including catalyst loading, nickel foam substrate, and degradation conditions have been investigated. Additionally, the transformations of crystal structure, surface chemistry, and morphology on the catalyst have been explored. The results show that sufficient catalyst loading and the support of nickel foam play significant roles in the catalytic reactivity. A phase transition from spinel Mn₃O₄ to layered birnessite, accompanied by a morphological change from nanospheres to laminae, is clarified during the PMS activation. The electrochemical analysis reveals that more favorable electronic transfer and ionic diffusion occur after the phase transition so as to enhance catalytic performance. The generated SO₄^•- and •OH radicals through redox reactions of Mn are demonstrated to account for the pollutant degradation. This work will provide new understandings of PMS activation by manganese oxides with high catalytic activity and reusability.

Fe(III) Docking-Activated Sites in Layered Birnessite for Efficient Water Oxidation

Non-noble metal catalysts for promoting the sluggish kinetics of oxygen evolution reaction (OER) are essential to efficient water splitting for sustainable hydrogen production. Birnessite has a local atomic structure similar to that of an oxygen-evolving complex in photosystem II, while the catalytic activity of birnessite is far from satisfactory. Herein, we report a novel Fe-Birnessite (Fe-Bir) catalyst obtained by controlled Fe(III) intercalation- and docking-induced layer reconstruction. The reconstruction dramatically lowers the OER overpotential to 240 mV at 10 mA/cm² and the Tafel slope to 33 mV/dec, making Fe-Bir the best of all the reported Bir-based catalysts, even on par with the best transition-metal-based OER catalysts. Experimental characterizations and molecular dynamics simulations elucidate that the catalyst features active Fe(III)-O-Mn(III) centers interfaced with ordered water molecules between neighboring layers, which lower reorganization energy and accelerate electron transfer. DFT calculations and kinetic measurements show non-concerted PCET steps conforming to a new OER mechanism, wherein the neighboring Fe(III) and Mn(III) synergistically co-adsorb OH* and O* intermediates with a substantially reduced O-O coupling activation energy. This work highlights the importance of elaborately engineering the confined interlayer environment of birnessite and more generally, layered materials, for efficient energy conversion catalysis.

Insights into the Electrochemical Behavior of Manganese Oxides as Catalysts for the Oxygen Reduction and Evolution Reactions: Monometallic Core-Shell Mn/Mn3 O4

Overcoming the sluggish electrode kinetics of both oxygen reduction and evolution reactions (ORR/OER) with non-precious metal electrocatalysts will accelerate the development of rechargeable metal-air batteries and regenerative fuel cells. The authors investigated the electrochemical behavior and ORR/OER catalytic activity of core-porous shell Mn/Mn₃ O₄ nanoparticles in comparison with other manganese dioxides (β- and γ-MnO₂ ), and benchmarked against Pt/C and Pt/C-IrO₂ . Under reversible operation in O₂ -saturated 5 M KOH at 22 °C, the early stage activity of core-shell Mn/Mn₃ O₄ shows two times higher ORR and OER current density compared to the other MnO₂ structures at 0.32 and 1.62 V versus RHE, respectively. It is revealed that Mn(III) oxidation to Mn(IV) is the primary cause of Mn/Mn₃ O₄ activity loss during ORR/OER potential cycling. To address it, an electrochemical activation method using Co(II) is proposed. By incorporating Co(II) into MnO_x , new active sites are introduced and the content of Mn(II) is increased, which can stabilize the Mn(III) sites through comproportionation with Mn(IV). The Co-incorporated Mn/Mn₃ O₄ has superior activity and durability. Furthermore, it also surpassed the activity of Pt/C-IrO₂ with similar durability. This study demonstrates that cost-effective ORR/OER catalysis is possible.

Amorphous Heterostructure Derived from Divalent Manganese Borate for Ultrastable and Ultrafast Aqueous Zinc Ion Storage

Aqueous zinc-manganese (Zn-Mn) batteries have promising potential in large-scale energy storage applications since they are highly safe, environment-friendly, and low-cost. However, the practicality of Mn-based materials is plagued by their structural collapse and uncertain energy storage mechanism upon cycling. Herein, this work designs an amorphous manganese borate (a-MnBO_x ) material via disordered coordination to alleviate the above issues and improve the electrochemical performance of Zn-Mn batteries. The unique physicochemical characteristic of a-MnBO_x enables the inner a-MnBO_x to serve as a robust framework in the initial energy storage process. Additionally, the amorphous manganese dioxide, amorphous Zn_x MnO(OH)₂ , and Zn₄ SO₄ (OH)₆ ·4H₂ O active components form on the surface of a-MnBO_x during the charge/discharge process. The detailed in situ/ex situ characterization demonstrates that the heterostructure of the inner a-MnBO_x and surface multicomponent phases endows two energy storage modes (Zn²⁺ /H⁺ intercalation/deintercalation process and reversible conversion mechanism between the Zn_x MnO(OH)₂ and Zn₄ SO₄ (OH)₆ ·4H₂ O) phases). Therefore, the obtained Zn//a-MnBO_x battery exhibits a high specific capacity of 360.4 mAh g^-1 , a high energy density of 484.2 Wh kg^-1 , and impressive cycling stability (97.0% capacity retention after 10 000 cycles). This finding on a-MnBO_x with a dual-energy storage mechanism provides new opportunities for developing high-performance aqueous Zn-Mn batteries.

Oxygen Evolution Electrocatalysts for the Proton Exchange Membrane Electrolyzer: Challenges on Stability

Hydrogen generated by proton exchange membrane (PEM) electrolyzer holds a promising potential to complement the traditional energy structure and achieve the global target of carbon neutrality for its efficient, clean, and sustainable nature. The acidic oxygen evolution reaction (OER), owing to its sluggish kinetic process, remains a bottleneck that dominates the efficiency of overall water splitting. Over the past few decades, tremendous efforts have been devoted to exploring OER activity, whereas most show unsatisfying stability to meet the demand for industrial application of PEM electrolyzer. In this review, systematic considerations of the origin and strategies based on OER stability challenges are focused on. Intrinsic deactivation of the material and the extrinsic balance of plant-induced destabilization are summarized. Accordingly, rational strategies for catalyst design including doping and leaching, support effect, coordination effect, strain engineering, phase and facet engineering are discussed for their contribution to the promoted OER stability. Moreover, advanced in situ/operando characterization techniques are put forward to shed light on the OER pathways as well as the structural evolution of the OER catalyst, giving insight into the deactivation mechanisms. Finally, outlooks toward future efforts on the development of long-term and practical electrocatalysts for the PEM electrolyzer are provided.

Engineering Oxygen Vacancies on Mixed-Valent Mesoporous α-MnO2 for High-Performance Asymmetric Supercapacitors

Intrinsically poor conductivity and sluggish ion-transfer kinetics limit the further development of electrochemical storage of mesoporous manganese dioxide. In order to overcome the challenge, defect engineering is an effective way to improve electrochemical capability by regulating electronic configuration at the atomic level of manganese dioxide. Herein, we demonstrate effective construction of defects on mesoporous α-MnO₂ through simply controlling the degree of redox reaction process, which could obtain a balance between Mn³⁺/Mn⁴⁺ ratio and oxygen vacancy concentration for efficient supercapacitors. The different structures of α-MnO₂ including the morphology, specific surface area, and composition are successfully constructed by tuning the mole ratio of KMnO₄ to Na₂SO₃. The electrode materials of α-MnO₂-0.25 with an appropriate Mn³⁺/Mn⁴⁺ ratio and abundant oxygen vacancy showed an outstanding specific capacitance of 324 F g^-1 at 0.5 A g^-1, beyond most reported MnO₂-based materials. The asymmetric supercapacitors formed from α-MnO₂-0.25 and activated carbon can present an energy density as high as of 36.33 W h kg^-1 at 200 W kg^-1 and also exhibited good cycle stability over a wide voltage range from 0 to 2.0 voltage (kept at approximately 98% after 10 000 cycles in galvanostatic cycling tests) and nearly 100% Coulombic efficiency. Our strategy lays a foundation for fine regulation of defects to improve charge-transfer kinetics.

Highly efficient OER catalyst enabled by in situ generated manganese spinel on polyaniline with strong coordination

The oxygen evolution reaction (OER), as the rate-determining step of electrochemical water splitting, is extremely crucial, and thus it is a requisite to engineer feasible and effective electrocatalysts to shrink the reaction energy barrier and accelerate the reaction. Herein, monodisperse Mn₃O₄ nanoparticles on a PANI substrate were synthesized by polymerization and in situ oxidation. Combining Mn₃O₄ nanoparticles and PANI fibers can not only maximize the strong coupling effect and synergistic effect but also construct a well-defined three-dimensional structure with extensive exposed active sites, where the permeation and adherence of the electrolyte are made exceedingly feasible, thus displaying excellent OER activity. Benefiting from the outstanding structural stability, the resulting Mn₃O₄/PANI/NF is able to deliver a low overpotential of 262 mV at a current density of 10 mA cm^-2, which outperforms the commercial RuO₂ catalyst (275 mV) as well as presently reported representative Mn-based and PANI-based electrocatalysts and state-of-the-art OER electrocatalysts. The synthetic method for Mn₃O₄/PANI not only provides a brand-new avenue for the rational design of inorganic material/conductive polymer composites but also broadens the understanding of the mechanism of Mn-based catalysts for highly enhanced OER.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Structural Variations of Metal Oxide-Based Electrocatalysts for Oxygen Evolution Reaction

Electrocatalytic oxygen evolution reaction (OER), an important electrode reaction in electrocatalytic and photoelectrochemical cells for a carbon-free energy cycle, has attracted considerable attention in the last few years. Metal oxides have been considered as good candidates for electrocatalytic OER because they can be easily synthesized and are relatively stable during the OER process. However, inevitable structural variations still occur to them due to the complex reaction steps and harsh working conditions of OER, thus impending the further insight into the catalytic mechanism and rational design of highly efficient electrocatalysts. The aim of this review is to disclose the current research progress toward the structural variations of metal oxide-based OER electrocatalysts. The origin of structural variations of metal oxides is discussed. Based on some typical oxides performing OER activity, the external and internal factors that influence the structural stability are summarized and then some general approaches to regulate the structural variation process are provided. Some operando methods are also concluded to monitor the structural variation processes and to identify the final active structure. Additionally, the unresolved problems and challenges are presented in an attempt to get further insight into the mechanism of structural variations and establish a rational structure-catalysis relationship.

3D Core-Shell TiO2@MnO2 Nanorod Arrays on Microcantilevers for Enhancing the Detection Sensitivity of Chemical Warfare Agents

Nanostructured microcantilevers have shown promise for sensing application of molecules in the vapor phase. Nanostructures have improved the molecule capture ability of microcantilevers by highly enhancing the surface of capture. Here, to improve the sensitivity and selectivity of a commercial microcantilever without functionalization, we developed 3D core-shell titanium dioxide@manganese dioxide (TiO₂@MnO₂) nanorod arrays on a microcantilever, which exhibited a high enhancement in the sensing performance beyond that of 1D nanostructures for the detection of dimethyl methylphosphonate, a simulant of sarin.

Autologous manganese phosphates with different Mn sites for electrocatalytic water oxidation

Herein, we report two autologous phosphates obtained from the same parent material for electrocatalytic water oxidation. These two phosphates have many similarities except the coordination structure of the Mn centers. It has been straightforwardly observed that the highly asymmetric geometry of Mn2P2O7 can stabilize the active Mn(iii) to promote water oxidation.

Reduced Intercalation Energy Barrier by Rich Structural Water in Spinel ZnMn2O4 for High-Rate Zinc-Ion Batteries

Aqueous zinc-ion batteries are considered promising next-generation systems for large-scale energy storage due to low cost, environmental friendliness, and high reversibility of the Zn anode. However, the interfacial charge-transfer resistance for the insertion of divalent Zn²⁺ into cathode materials is normally high, which limits the kinetics of Zn²⁺ transfer at the cathode/electrolyte interface. This study reveals the presence of rich structural water in spinel ZnMn₂O₄ (ZnMn₂O₄·0.94H₂O, denoted as ZMO), synthesized by a scalable and low-temperature process, significantly overcoming the great interfacial charge-transfer resistance. ZMO exhibits excellent electrochemical performance toward Zn storage, that is, high capacity (230 and 101 mA h g^-1 at 0.5 and 8 A g^-1), high specific energy/specific power (329 W h kg^-1/706 W kg^-1 and 134 W h kg^-1/11,160 W kg^-1), and stable cycle retention (75% after 2000 cycles at 4 A g^-1) can be achieved. On the contrary, the controlled sample ZMO-450 with deficient structural water, prepared by post-heat treatment of ZMO at 450 °C, demonstrates limited discharge capacity (45 and 15 mA h g^-1 at 0.5 and 8 A g^-1). As examined by electrochemical impedance spectroscopy, rich structural water in ZMO effectively reduces the activation energy barrier upon Zn²⁺ insertion, rendering fast interfacial kinetics for Zn storage. Benefiting from rich structural water in ZMO, the involvement of Zn²⁺ during the charge/discharge process exhibits good reversibility, as characterized by X-ray diffraction and X-ray photoelectron spectroscopy.

Combination of Highly Efficient Electrocatalytic Water Oxidation with Selective Oxygenation of Organic Substrates using Manganese Borophosphates

One of the key catalytic reactions for life on earth, the oxidation of water to molecular oxygen, occurs in the oxygen-evolving complex of the photosystem II (PSII) mediated by a manganese-containing cluster. Considerable efforts in this research area embrace the development of efficient artificial manganese-based catalysts for the oxygen evolution reaction (OER). Using artificial OER catalysts for selective oxygenation of organic substrates to produce value-added chemicals is a worthwhile objective. However, unsatisfying catalytic performance and poor stability have been a fundamental bottleneck in the field of artificial PSII analogs. Herein, for the first time, a manganese-based anode material is developed and paired up for combining electrocatalytic water oxidation and selective oxygenations of organics delivering the highest efficiency reported to date. This can be achieved by employing helical manganese borophosphates, representing a new class of materials. The uniquely high catalytic activity and durability (over 5 months) of the latter precursors in alkaline media are attributed to its unexpected surface transformation into an amorphous MnO_x phase with a birnessite-like short-range order and surface-stabilized Mn^III sites under extended electrical bias, as unequivocally demonstrated by a combination of in situ Raman and quasi in situ X-ray absorption spectroscopy as well as ex situ methods.

Selective Synthesis of α-, β-, and γ-Ag2WO4 Polymorphs: Promising Platforms for Photocatalytic and Antibacterial Materials

Silver tungstate (Ag₂WO₄) shows structural polymorphism with different crystalline phases, namely, orthorhombic, hexagonal, and cubic structures that are commonly known as α, β, and γ, respectively. In this work, these Ag₂WO₄ polymorphs were selectively and successfully synthesized through a simple precipitation route at ambient temperature. The polymorph-controlled synthesis was conducted by means of the volumetric ratios of the silver nitrate/tungstate sodium dehydrate precursors in solution. The structural and electronic properties of the as-synthesized Ag₂WO₄ polymorphs were investigated by using a combination of X-ray diffraction and Rietveld refinements, X-ray absorption spectroscopy, X-ray absorption near-edge structure spectroscopy, field-emission scanning electron microscopy images, and photoluminescence. To complement and rationalize the experimental results, first-principles calculations, at the density functional theory level, were carried out, leading to an unprecedented glimpse into the atomic-level properties of the morphology and the exposed surfaces of Ag₂WO₄ polymorphs. Following the analysis of the local coordination of Ag and W cations (clusters) at each exposed surface of the three polymorphs, the structure-property relationship between the morphology and the photocatalytic and antibacterial activities against amiloride degradation under ultraviolet light irradiation and methicillin-resistant Staphylococcus aureus, respectively, was investigated. A possible mechanism of the photocatalytic and antibacterial activity as well the formation process and growth of the polymorphs is also explored and proposed.

Capturing Manganese Oxide Intermediates in Electrochemical Water Oxidation at Neutral pH by In Situ Raman Spectroscopy

Electrochemical water splitting is a promising means to produce eco-friendly hydrogen fuels. Inspired by the Mn₄ CaO₅ cluster in nature, substantial works have been performed to develop efficient manganese (Mn)-based heterogeneous catalysts. Despite improvements in catalytic activity, the underlying mechanism of the oxygen evolution reaction (OER) is not completely elucidated owing to the lack of direct spectroscopic evidence for the active Mn-oxo moieties. We identify water oxidation intermediates on the surface of Mn₃ O₄ nanoparticles (NPs) in the OER at neutral pH by in situ Raman spectroscopy. A potential-dependent Raman peak was detected at 760 cm^-1 and assigned to the active Mn^IV =O species generated during water oxidation. Isotope-labeling experiments combined with scavenger experiments confirmed the generation of surface terminal Mn^IV =O intermediates in the Mn-oxide NPs. This study provides an insight into the design of systems for the observation of reaction intermediates.

Jahn-Teller Disproportionation Induced Exfoliation of Unit-Cell Scale ϵ-MnO2

Exfoliation of non-layered (structurally) bulk materials at the nanoscale is challenging because of the strong chemical bonds in the lattice, as opposed to the weak van der Waals (vdW) interactions in layered materials. We propose a top-down method to exfoliate ϵ-MnO₂ nanosheets in a family of charge-ordered La_1-x AE_x MnO₃ (AE=Ca, Sr, Ba) perovskites, taking advantage of the Jahn-Teller disproportionation effect of Mn³⁺ and bond-strength differences. ϵ-MnO₂ crystallized into a nickel arsenide (NiAs) structure, with a thickness of 0.91 nm, displays thermal metastability and superior water oxidation activity compared to other manganese oxides. The exfoliation mechanism involves a synergistic proton-induced Mn³⁺ disproportionation and structural reconstruction. The synthetic method could also be potentially extended to the exfoliation of other two-dimensional nanosheet materials with non-layered structures.

Large-Scale Atomic Simulation via Machine Learning Potentials Constructed by Global Potential Energy Surface Exploration

Atomic simulations based on quantum mechanics (QM) calculations have entered into the tool box of chemists over the past few decades, facilitating an understanding of a wide range of chemistry problems, from structure characterization to reactivity determination. Due to the poor scaling and high computational cost intrinsic to QM calculations, one has to either sacrifice accuracy or time when performing large-scale atomic simulations. The battle to find a better compromise between accuracy and speed has been central to the development of new theoretical methods.The recent advances of machine-learning (ML)-based large-scale atomic simulations has shown great promise to the benefit of many branches of chemistry. Instead of solving the Schrödinger equation directly, ML-based simulations rely on a large data set of accurate potential energy surfaces (PESs) and complex numerical models to predict the total energy. These simulations feature both a high speed and a high accuracy for computing large systems. Due to the lack of a physical foundation in numerical models, ML models are often frustrated in their predictivity and robustness, which are key to applications. Focusing on these concerns, here we overview the recent advances in ML methodologies for atomic simulations on three key aspects. Namely, the generation of a representative data set, the extensity of ML models, and the continuity of data representation. While global optimization methods are the natural choice for building a representative data set, the stochastic surface walking method is shown to provide the desired PES sampling for both minima and transition regions on the PES. The current ML models generally utilize local geometrical descriptors as an input and consider the total energy as the sum of atomic energies. There are many flavors of data descriptors and ML models, but the applications for material and reaction predictions are still limited, not least because of the difficulty to train the associated vast global data sets. We show that our recently designed power-type structure descriptors together with a feed-forward neural network (NN) model are compatible with highly complex global PES data, which has led to a large family of global NN (G-NN) potentials.Two recent applications of G-NN potentials in material and reaction simulations are selected to illustrate how ML-based atomic simulations can help the discovery of new materials and reactions.

Factors Governing the Activity of α-MnO2 Catalysts in the Oxygen Evolution Reaction: Conductivity versus Exposed Surface Area of Cryptomelane

Cryptomelane (α-(K)MnO2 ) powders were synthesized by different methods leading to only slight differences in their bulk crystal structure and chemical composition, while the BET surface area and the crystallite size differed significantly. Their performance in the oxygen evolution reaction (OER) covered a wide range and their sequence of increasing activity differed when electrocatalysis in alkaline electrolyte and chemical water oxidation using Ce4+ were compared. The decisive factors that explain this difference were identified in the catalysts' microstructure. Chemical water oxidation activity is substantially governed by the exposed surface area, while the electrocatalytic activity is determined largely by the electric conductivity, which was found to correlate with the particle morphology in terms of needle length and aspect ratio in this sample series. This correlation is rather explained by an improved conductivity due to longer needles than by structure sensitivity as was supported by reference experiments using H2 O2 decomposition and carbon black as additive. The most active catalyst R-cryptomelane reached a current density of 10 mA cm-2 at a potential 1.73 V without, and at 1.71 V in the presence of carbon black. The improvement was significantly higher for the catalyst with lower initial activity. However, the materials showed a disappointing catalytic stability during alkaline electrochemical OER, whereas the crystal structure was found to be stable at working conditions.

Two 3D Mn-based coordination polymers: synthesis, structure and magnetocaloric effect

Two three-dimensional (3D) coordination polymers, namely MnII 6(CH3COO)2(HCOO)2(IN)8(C4H8O)2(H2O) and MnIII 6MnII 12(μ3-O)6(CH3COO)12(IN)18(H2O)7.5 (abbreviated as Mn II 6 and Mn II 12 Mn III 6 respectively; HIN = isonicotinic acid), were synthesized by the reaction of Mn(CH3COO)2·4H2O and isonicotinic acid under solvothermal conditions. Magnetic studies revealed that antiferromagnetic interactions may be present in compounds Mn II 6 and Mn II 12 Mn III 6 . Moreover, the values of -ΔS m (26.27 (Mn II 6 ) and 37.69 (Mn II 12 Mn III 6 ) J kg-1 K-1 at ΔH = 7 T) are relatively larger than those of the reported Mn-based coordination polymers. This work provides a great scope in the magnetocaloric effect (MCE) of pure 3d-type systems.

Verchenko V, Shevelkov AV, Driess M. Boosting Water Oxidation through In Situ Electroconversion of Manganese Gallide: An Intermetallic Precursor Approach

For the first time, the manganese gallide (MnGa4 ) served as an intermetallic precursor, which upon in situ electroconversion in alkaline media produced high-performance and long-term-stable MnOx -based electrocatalysts for water oxidation. Unexpectedly, its electrocorrosion (with the concomitant loss of Ga) leads simultaneously to three crystalline types of MnOx minerals with distinct structures and induced defects: birnessite δ-MnO2 , feitknechtite β-MnOOH, and hausmannite α-Mn3 O4 . The abundance and intrinsic stabilization of MnIII /MnIV active sites in the three MnOx phases explains the superior efficiency and durability of the system for electrocatalytic water oxidation. After electrophoretic deposition of the MnGa4 precursor on conductive nickel foam (NF), a low overpotential of 291 mV, comparable to that of precious-metal-based catalysts, could be achieved at a current density of 10 mA cm-2 with a durability of more than five days.

Unravelling H+ /Zn2+ Synergistic Intercalation in a Novel Phase of Manganese Oxide for High-Performance Aqueous Rechargeable Battery

Aqueous Zn-MnO₂ batteries using mild electrolyte show great potential in large-scale energy storage (LSES) application, due to high safety and low cost. However, structure collapse of manganese oxides upon cycling caused by the conversion mechanism (e.g., from tunnel to layer structures for α-, β-, and γ-phases) is one of the most urgent issues plaguing its practical applications. Herein, to avoid the phase conversion issue and enhance battery performance, a structurally robust novel phase of manganese oxide MnO₂ H_0.16 (H₂ O)_0.27 (MON) nanosheet with thickness of ≈2.5 nm is designed and synthesized as a promising cathode material, in which a nanosheet structure combined with a novel H⁺ /Zn²⁺ synergistic intercalation mechanism is demonstrated and evidenced. Accordingly, a high-performance Zn/MON cell is achieved, showing a high energy density of ≈228.5 Wh kg^-1 , impressive cyclability with capacity retention of 96% at 0.5 C after 300 cycles, as well as exhibiting rate performance of 115.1 mAh g^-1 at current rate of 10 C. To the best current knowledge, this H⁺ /Zn²⁺ synergistic intercalation mechanism is first reported in an aqueous battery system, which opens a new opportunity for development of high-performance aqueous Zn ion batteries for LSES.

Oxidative nucleation and growth of Janus-type MnOx-Ag and MnOx-AgI nanoparticles

Janus nanoparticles (NPs) containing two chemically distinct materials in one system are of great significance for catalysis in terms of harnessing catalytic synergies that do not exist in either component. We herein present a novel synthetic method of two Janus-type MnOx-Ag and MnOx-AgI NPs. The synthesis of Janus-type MnOx-AgI NPs is based on the oxidative nucleation and growth of Ag domains on MnO first and the subsequent iodization of Ag. A mild and non-disruptive iodization strategy is developed to yield Janus MnOx-AgI NPs, in which converting Ag to AgI domains with iodomethane (CH3I) is achieved through partial iodization. Simultaneously, Mn2+ species in the primary MnO octahedra are oxidized during the growth of Ag NPs, leading to the formation of amorphous p-type MnOx domains. Therefore, the as-resultant Janus-type MnOx-AgI NPs combining two semiconductors into an integrated nanostructure can be used as an efficient photocatalyst for visible-light-driven water oxidation. Janus MnOx-AgI NPs show an expected photocatalytic activity even in the absence of Ru(bpy)3Cl2 as an electron mediator. This intriguing synthesis may offer a new opportunity to develop asymmetric nanostructures of two semiconductors that will potentially be efficient photocatalysts for solar-driven water splitting.

First-Principles Simulations for Morphology and Structural Evolutions of Catalysts in Oxygen Evolution Reaction

Developing a robust catalyst for the oxygen evolution reaction is the major challenge in the field of renewable energy. The difficulty comes from not only the low intrinsic activity, but also the structural uncertainty of catalysts under the operating conditions. Therefore, finding the relationship between structural evolution and the OER activity is urgently required. At present, first-principles simulations have become a powerful tool to understand the mechanism of the OER at the atomic level. In this review, TiO₂ , MnO_x , and CoS₂ are used as examples to demonstrate how first-principles calculations can predict the morphology of nanoparticles, explore the pathway of electrochemically induced phase transition, and resolve the structure of a heterojunction. With these new theoretical techniques, the structure-activity relationship of the OER for a complex catalytic system can be determined without experimental inputs. Such a bottom-up strategy holds great promise to reveal the active site and mechanism of a complex catalytic system from first-principles calculations.

Recent advances of polyoxometalate-catalyzed selective oxidation based on structural classification

The structural diversity and tenability observed in POMs has encouraged extensive investigations into their catalytic activity. Based on the structural classification of POMs, this review summarizes recent advances relating to POM-catalyzed selective oxidation and places most emphasis on dynamic developments from 2015 onwards. Work which contributes to comparing the catalytic performance of POMs with delicate structural differences (e.g. the same type of POM structure with differences of the heteroatom, addenda, protonated state or counter-ion) and in elucidating the origin/distinction of catalytic activity, as well as reasonable mechanisms, are especially highlighted.

Manganese(ii) phosphate nanosheet assembly with native out-of-plane Mn centres for electrocatalytic water oxidation

Nature selects Mn-clusters as catalysts for water oxidation, which is a significant reaction in photosynthesis.

Nature selects Mn-clusters as catalysts for water oxidation, which is a significant reaction in photosynthesis. Thus, it is of critical importance to develop Mn-based superstructures and study their catalytic details for water-splitting-based renewable energy research. Herein, we report a manganese(ii) phosphate nanosheet assembly with asymmetric out-of-plane Mn centers from the transformation of amine-intercalated nanoplates for efficient electrocatalytic water oxidation in neutral aqueous solutions. From structural and computational studies, it is found that the native out-of-plane Mn centers with terminal water ligands are accessible and preferential oxidation sites to form active intermediates for water oxidation. In addition, the asymmetry can stabilize the key Mn^III intermediate, as demonstrated by electrochemical and spectrometric studies. This study delivers a convenient strategy to prepare unique nanosheet assemblies for electrocatalysis and fundamental understandings of oxygen evolution chemistry.

Facile, Room Temperature, Electroless Deposited (Fe1-x, Mnx )OOH Nanosheets as Advanced Catalysts: The Role of Mn Incorporation

Herein, bimetallic iron (Fe)-manganese (Mn) oxyhydroxide ((Fe_1-x, Mn_x )OOH, FeMnOOH) nanosheets on fluorine-doped tin oxide conducting substrates and on semiconductor photoanodes are synthesized by a facile, room temperature, electroless deposition method as catalysts for both electrochemical and photo-electrochemical (PEC) water splitting, respectively. Surprisingly, Mn-doped FeOOH can significantly modulate the nanosheet morphology to increase the active surface area, boost more active sites, and augment the intrinsic activity by tuning the electronic structure of FeOOH. Due to the 2D nanosheet architecture, the optimized FeMnOOH exhibits superior electrochemical activity and outstanding durability for the oxygen evolution reaction with a low overpotential of 246 mV at 10 mA cm^-2 and 414 mV at 100 mA cm^-2 , and long-term stability for 40 h without decay, which is comparable to the best electrocatalysts for water oxidation reported in the literature. By integrating with semiconductor photoanodes (such as α-Fe₂ O₃ nanorod (NR) arrays), bimetallic FeMnOOH catalysts achieve solar-driven water splitting with a significantly enhanced PEC performance (3.36 mA cm^-2 at 1.23 V vs reversible hydrogen electrode (RHE)) with outstanding long-term stability (≈8 h) compared to that of the bare Fe₂ O₃ NR (0.92 mA cm^-2 at 1.23 V vs RHE).