Aperture-Opening Encapsulation of a Transition Metal Catalyst in a Metal–Organic Framework for CO2 Hydrogenation

Enhanced Proximity of Rh1,2-Rhn Ensembles Encaged in UiO-67 Boosting Catalytic Conversion of Syngas to Oxygenates

Maintaining high conversion under the premise of high oxygenates selectivity in syngas conversion is important but a formidable challenge in Rh catalysis. Monometallic Rh catalysts provide poor oxygenate conversion efficiency, and efforts have been focused on constructing adjacent polymetallic sites; however, the one-pass yields of C2+ oxygenates over the reported Rh-based catalysts were mostly <20 %. In this study, we constructed a monometallic Rh catalyst encapsulated in UiO-67 (Rh/UiO-67) with enhanced proximity to dual-site Rh1,2-Rhn ensembles. Unexpectedly, this catalyst exhibited high efficacy for oxygenate synthesis from syngas, giving a high oxygenate selectivity of 72.0 % with a remarkable CO conversion of 50.4 %, and the one-pass yield of C2+ oxygenates exceeded 25 %. The state-of-the-art characterizations further revealed the spontaneous formation of an ensemble of Rh single atoms/dimers (Rh1,2) in the proximity of ultrasmall Rh clusters (Rhn) confined within the nanocavity of UiO-67, providing adjacent Rh+-Rh0 dual sites dynamically during the reaction that promote the relay of the undissociated CHO species to the CHx species. Thus, our results open a new route for designing highly efficient Rh catalysts for the conversion of syngas to oxygenates by precisely tuning the ensemble and proximity of the dual active sites in a confined space.

The superiority of Pd2+ in CO2 hydrogenation to formic acid

The hydrogenation of CO2 to formic acid is an essential subject since formic acid is a promising hydrogen storage material and a valuable commodity chemical. In this study, we report for the first time the hydrogenation of CO2 to formic acid catalyzed by a Pd2+ catalyst, Pd-V/AC-air. The catalyst exhibited extraordinary catalytic activity toward the hydrogenation of CO2 to formic acid. The TON and TOF are up to 4790 and 2825 h-1, respectively, representing the top level among reported heterogeneous Pd catalysts. By combining a study of first-principles density functional theory with experimental results, the superiority of Pd2+ over Pd0 was confirmed. Furthermore, the presence of V modified the electronic state of Pd2+, thus promoting the reaction. This study reports the effect of metal valence and electronic state on the catalytic performance for the first time and provides a new prospect for the design of an efficient heterogeneous catalyst for the hydrogenation of CO2 to formic acid.

Quest for Multifunctionality: Current Progress in the Characterization of Heterometallic Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are a class of porous, crystalline materials that have been systematically developed for a broad range of applications. Incorporation of two or more metals into a single crystalline phase to generate heterometallic MOFs has been shown to lead to synergistic effects, in which the whole is oftentimes greater than the sum of its parts. Because geometric proximity is typically required for metals to function cooperatively, deciphering and controlling metal distributions in heterometallic MOFs is crucial to establish structure-function relationships. However, determination of short- and long-range metal distributions is nontrivial and requires the use of specialized characterization techniques. Advancements in the characterization of metal distributions and interactions at these length scales is key to rapid advancement and rational design of functional heterometallic MOFs. This perspective summarizes the state-of-the-art in the characterization of heterometallic MOFs, with a focus on techniques that allow metal distributions to be better understood. Using complementary analyses, in conjunction with computational methods, is critical as this field moves toward increasingly complex, multifunctional systems.

Microenvironment Modulation of Single-Atom Ru in ZrSBA-15 for CO2 Hydrogenation to Formic Acid

The chemical microenvironment modulation of active sites holds promise for facilitating their catalytic performance. Herein, single-atom Ru anchored by ZrSBA-15 modified with diverse organic amine groups has been fabricated and enabled CO2 hydrogenation to produce formic acid (FA) under mild conditions. However, the reaction cannot be achieved without the modification of organic amines. The functional groups as the microenvironment around Ru active sites effectively regulated the activity, in which Ru encapsulated in ZrSBA-15 bearing -NH2 groups exhibited the highest activity, with turnover number (TON) and turnover frequency (TOF) values of 505 and 64 h-1, respectively. Both characterization and experimental results validated that the functional group manipulated the adsorption capacity of the reactant, the electronic state of Ru and hydrophilicity/hydrophobicity of the materials, and thus the catalytic performance.

Defect-Mediated Synergistic Effect of POM/UiO-66(Zr) Host-Guest Catalysts for Robust Deep Desulfurization at Ambient Temperature

Stable platforms of host-guest catalysts are indispensable in the field of heterogeneous catalysis, however, clarifying the specific effect of host remains challenging. Herein, polyoxometalate (POM) is encapsulated in three types of UiO-66(Zr) with different controlled densities of defects by the aperture opening and closing strategy at ambient-temperature. It is found that catalytic activity of POM for oxidative desulfurization (ODS) at room temperature is turned on when encapsulated in the defective UiO-66(Zr), and the sulfur oxidation efficiency shows an obvious increasing trend (from 0.34 to 10.43 mmol g-1 h-1 ) with the increased concentration of defects in UiO-66(Zr) host. The as-prepared catalyst with the most defective host displays ultrahigh performance which removed 1000 ppm sulfur with exceptionally diluted oxidant at room-temperature within 25 min. The turnover frequency can reach 620.0 h-1 at 30 °C, which surpassed all the reported MOFs based ODS catalysts. A substantial guest/host synergistic effect mediated by the defective sites in UiO-66(Zr) is responsible for the enhancement. Density functional theory calculations reveal that OH/OH2 capped on the open Zr sites of host UiO-66(Zr) can decompose H2 O2 to OOH group and enables the formation of WVI -peroxo intermediates that determine the ODS activity.

Confinement of Organic Dyes in UiO-66-Type Metal-Organic Frameworks for the Enhanced Synthesis of [1,2,5]Thiadiazole[3,4-g]benzoimidazoles

Organic dyes as non-noble metal photosensitizers have attracted increasing attention due to their environmental friendliness and sustainability but suffer from fast deactivation and low stability. Here, we reported a fruitful strategy by the confinement and stabilization of visible light-active signal unit organic dyes within the metal-organic frameworks (MOFs) and developed a series of heterogeneous photocatalysts dye@UiO-66s [dye = fluorescein (FL)/rhodamine B (RhB)/eosin Y (EY), UiO-66s = UiO-66, and Bim-UiO-66]. It has been demonstrated that the encapsulated dyes can effectively sensitize MOF hosts and dominate the band structures and photocatalytic activities of dye@UiO-66s regardless of the ligand functionalization of MOFs. Photocatalytic experiments showed that these dye@UiO-66s exhibit enhanced activities relative to free dyes and among them, FL@Bim-UiO-66 displays excellent efficiencies toward the green synthesis of new carbon-bridged annulations, [1,2,5]thiadiazole[3,4-g]benzoimidazoles in the yield of up to 98% at room temperature with outstanding stability and reusability. Furthermore, the intramolecular cyclization intermediate was captured and characterized by the single-crystal X-ray diffraction analysis.

Ru Supported on p-phthalic acid-Mn Derived from a Mn Metal-Organic Framework for Thermo- and Electrocatalytic Synthesis of Ethylene-D4 Glycol

Deuterium-labeled polyols are one of the most extensive applied chemicals in biochemistry and biophysics. However, the deuteriation still is insufficient, exhibiting a low deuterated ratio and indistinct reaction mechanism. Herein, Ru supported on MnBCD (MnBDC, derived from Mn p-phthalic acid metal-organic framework) as nanocatalyst with an agglomerated sheet-type structure; this allows the possibility of achieving both thermo- and electrocatalytic hydrogen isotope exchange (HIE) reaction. Furthermore, XPS characterization confirmed that the specific structural changes in the electron density of Ru outer layers were modulated through the impregnation and reduction processes. According to the change of outer electronic structure, hydrogen spillover and electron-rich flow promote the reaction of the catalyst in thermo- and electrocatalytic systems, respectively. In addition, the results indicate that a high deuterated ratio of 97 % can be obtained, hence the catalytic technology has enormous potential for the synthesis of a broad variety of deuterium-labeled compounds.

Surface-decorated porphyrinic zirconium-based metal-organic frameworks (MOFs) using post-synthetic self-assembly for photodegradation of methyl orange dye

We report herein the surface decoration of a water-soluble free-base porphyrin, namely, 5,10,15,20-tetrakis(1-methyl-4-pyridinio)porphyrin-tetra(p-toluenesulfonate) (H₂TMPyP), over three different zirconium-based metal-organic frameworks of different linker structure and functionality; namely UiO66, UiO66-NH₂, and MIP-202, via self-assembly. The synthesized MOFs along with the resulting complexes have been characterized via spectroscopic and analytical techniques (XRD, FT-IR, TEM, N₂ adsorption/desorption, and laser scanning confocal microscopy). The self-assembly of H₂TMPyP with the examined three MOFs was observed by using the steady-state absorption and fluorescence, as well as the fluorescence lifetime studies. It was evident that the highest complex interaction was recorded between porphyrin and UiO-66-NH₂ compared with the lowest interactions between porphyrin and MIP-202. This is in good agreement with the high surface area and pore volume of UiO-66 (1100 m² g^-1 and 0.68 cm³ g^-1) and compared to that of MIP-202 (94 m² g^-1 and 0.26 cm³ g^-1). The photocatalytic activities of the three porphyrin entities immobilized zirconium-based MOFs were compared toward methyl orange dye degradation from aqueous solution under visible light irradiation (λ_ex = 430 nm). The photocatalytic studies render the fabrication of the self-assembled H₂TMPyP@UiO-66-NH₂ composite as a promising material for dye degradation from polluted wastewater.

Three-Dimensional Neodymium Metal-Organic Framework for Catalyzing the Cyanosilylation of Aldehyde and the Synthesis of 2,3-Dihydroquinazolin-4(1H)-one Derivatives

In this work, a novel 3D lanthanide metal-organic framework (Ln-MOF) Nd-cdip (H₄cdip = 5,5'-carbonyldiisophthalic acid) was successfully synthesized, which could be used as an efficient heterogeneous catalyst for cyanosilylation and the synthesis of 2,3-dihydroquinazolin-4(1H)-one derivatives at room temperature based on the Lewis acid sites in the channels of the MOF. Moreover, Nd-cdip had an excellent turnover number (500) for catalyzing cyanosilylation in no solvent condition. Nd-cdip could be reused in both of the above-mentioned reactions at least five times without a significant decrease in yield. The possible mechanism of cyanosilylation catalyzed by Nd-cdip was studied by using the luminescence properties of Tb-cdip, which has the same structure and functions as Nd-cdip. Furthermore, both reactions catalyzed by Nd-cdip were fitted to zero-order dynamics.

Reaction and separation system for CO2 hydrogenation to formic acid catalyzed by iridium immobilized on solid phosphines under base-free condition

Hydrogenation of carbon dioxide (CO₂) to produce formic acid (HCOOH) in base-free condition can avoid waste producing and simplify product separation process. However, it remains a big challenge because of the unfavorable energy in both thermodynamics and dynamics. Herein, we report the selective and efficient hydrogenation of CO₂ to HCOOH under neutral conditions with imidazolium chloride ionic liquid as the solvent, catalyzed by a heterogeneous Ir/PPh₃ compound. The heterogeneous catalyst is more effective than the homogeneous one because it is inert in catalyzing the decomposition of product. A turnover number (TON) of 12700 can be achieved, and HCOOH with a purity of 99.5% can be isolated by distillation because of the non-volatility of the solvent. Both the catalyst and imidazolium chloride can be recycled at least 5 times with stable reactivity.

Unveiling Unexpected Modulator-CO2 Dynamics within a Zirconium Metal-Organic Framework

Carbon capture, storage, and utilization (CCSU) represents an opportunity to mitigate carbon emissions that drive global anthropogenic climate change. Promising materials for CCSU through gas adsorption have been developed by leveraging the porosity, stability, and tunability of extended crystalline coordination polymers called metal-organic frameworks (MOFs). While the development of these frameworks has yielded highly effective CO₂ sorbents, an in-depth understanding of the properties of MOF pores that lead to the most efficient uptake during sorption would benefit the rational design of more efficient CCSU materials. Though previous investigations of gas-pore interactions often assumed that the internal pore environment was static, discovery of more dynamic behavior represents an opportunity for precise sorbent engineering. Herein, we report a multifaceted in situ analysis following the adsorption of CO₂ in MOF-808 variants with different capping agents (formate, acetate, and trifluoroacetate: FA, AA, and TFA, respectively). In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis paired with multivariate analysis tools and in situ powder X-ray diffraction revealed unexpected CO₂ interactions at the node associated with dynamic behavior of node-capping modulators in the pores of MOF-808, which had previously been assumed to be static. MOF-808-TFA displays two binding modes, resulting in higher binding affinity for CO₂. Computational analyses further support these dynamic observations. The beneficial role of these structural dynamics could play an essential role in building a deeper understanding of CO₂ binding in MOFs.

Catalytic Hydrogenation of CO2 to Formate Using Ruthenium Nanoparticles Immobilized on Supported Ionic Liquid Phases

Ruthenium nanoparticles (NPs) immobilized on imidazolium-based supported ionic liquid phases (Ru@SILP) act as effective heterogeneous catalysts for the hydrogenation of carbon dioxide (CO₂ ) to formate in a mixture of water and triethylamine (NEt₃ ). The structure of the imidazolium-based molecular modifiers is varied systematically regarding side chain functionality (neutral, basic, and acidic) and anion to assess the influence of the IL-type environment on the NPs synthesis and catalytic properties. The resulting Ru@SILP materials contain well-dispersed Ru NPs with diameters in the range 0.8-2.9 nm that are found 2 to 10 times more active for CO₂ hydrogenation than a reference Ru@SiO₂ catalyst under identical conditions. Introduction of sulfonic acid groups in the IL modifiers results in a greatly increased turnover number (TON) and turnover frequency (TOF) at reduced metal loadings. As a result, excellent productivity with TONs up to 16 100 at an initial TOF of 1430 h^-1 can be achieved with the Ru@SILP(SO₃ H-OAc) catalyst. H/D exchange and other control experiments suggest an accelerated desorption of the formate species from the Ru NPs promoted by the presence of ammonium sulfonate species on Ru@SILP(SO₃ H-X) materials, resulting in enhanced catalyst activity and productivity.

Structure and thermodynamics of water adsorption in NU-1500-Cr

Metal-organic frameworks (MOFs) are a class of materials with diverse chemical and structural properties, and have been shown to effectively adsorb various types of guest molecules. The mechanism of water adsorption in NU-1500-Cr, a high-performance atmospheric water harvesting MOF, is investigated using a combination of molecular dynamics simulations and infrared spectroscopy. Calculations of thermodynamic and dynamical properties of water as a function of relative humidity allow for following the adsorption process from the initial hydration stage to complete filling of the MOF pores. Initial hydration begins at the water molecules that saturate the open Cr³⁺ sites of the framework, which is then followed by the formation of water chains that extend along the channels connecting the hexagonal pores of the framework. Water present in these channels gradually coalesces and fills the hexagonal pores sequentially after the channels are completely hydrated. The development of hydrogen-bond networks inside the MOF pores as a function of relative humidity is characterized at the molecular level using experimental and computational infrared spectroscopy. A detailed analysis of the OH-stretch vibrational band indicates that the low-frequency tail stems from strongly polarized hydrogen-bonded water molecules, suggesting the presence of some structural disorder in the experimental samples. Strategies for designing efficient water harvesting MOFs are also proposed based on the mechanism of water adsorption in NU-1500-Cr.

Nanosized metal-organic frameworks as unique platforms for bioapplications

Metal-organic frameworks (MOFs) are extremely versatile materials, which serve to create platforms with exceptional porosity and specific reactivities. The production of MOFs at the nanoscale (NMOFs) offers the possibility of creating innovative materials for bioapplications as long as they maintain the properties of their larger counterparts. Due to their inherent chemical versatility, synthetic methods to produce them at the nanoscale can be combined with inorganic nanoparticles (NPs) to create nanocomposites (NCs) with one-of-a-kind features. These systems can be remotely controlled and can catalyze abiotic reactions in living cells, which have the potential to stimulate further research on these nanocomposites as tools for advanced therapies.

Confinement Effects in Well-Defined Metal-Organic Frameworks (MOFs) for Selective CO2 Hydrogenation: A Review

Decarbonization has become an urgent affair to restrain global warming. CO₂ hydrogenation coupled with H₂ derived from water electrolysis is considered a promising route to mitigate the negative impact of carbon emission and also promote the application of hydrogen. It is of great significance to develop catalysts with excellent performance and large-scale implementation. In the past decades, metal-organic frameworks (MOFs) have been widely involved in the rational design of catalysts for CO₂ hydrogenation due to their high surface areas, tunable porosities, well-ordered pore structures, and diversities in metals and functional groups. Confinement effects in MOFs or MOF-derived materials have been reported to promote the stability of CO₂ hydrogenation catalysts, such as molecular complexes of immobilization effect, active sites in size effect, stabilization in the encapsulation effect, and electron transfer and interfacial catalysis in the synergistic effect. This review attempts to summarize the progress of MOF-based CO₂ hydrogenation catalysts up to now, and demonstrate the synthetic strategies, unique features, and enhancement mechanisms compared with traditionally supported catalysts. Great emphasis will be placed on various confinement effects in CO₂ hydrogenation. The challenges and opportunities in precise design, synthesis, and applications of MOF-confined catalysis for CO₂ hydrogenation are also summarized.

Facile immobilization of PNNNP-Pd pincer complexes in MFU-4l-OH and the effects of guest loading on Lewis acid catalytic activity

A palladium diphosphine pincer complex H₃(P^NN^NP-PdI) has been encapsulated in the benzotriazolate metal-organic framework MFU-4l-OH ([Zn₅(OH)₄(btdd)₃], btdd^2- = bis(1,2,3-triazolo)dibenzodioxin), and the resulting materials were investigated as Lewis acid catalysts for cyclization of citronellal to isopulegol. Rapid catalyst immobilization is facilitated by a Brønsted acid-base reaction between the H₃(P^NN^NP-PdI) benzoic acid substituents and Zn-OH groups at the framework nodes. Catalyst loading can be controlled up to a maximum of 0.5 pincer complexes per formula unit [PdI-x, Zn₅(OH)_4-nx(btdd)₃(H_3-nP^NN^NP-PdI)_xx = 0.06-0.5, n ≈ 2.75]. Oxidative ligand exchange was used to replace I^- with weakly coordinating BF₄^- anions at the Pd-I sites, generating the activated PdBF4-x catalysts (x = 0.06, 0.10, 0.18, 0.40). The Lewis acid catalytic activity of the PdBF4-x series decreases with increasing catalyst density as a result of the appearance of mass transport limitations. Initial catalytic rates show that the activity of PdBF4-0.06 approaches the intrinsic activity of a homogeneous P^NN^NP-PdBF₄ catalyst analogue. In addition, PdBF4-0.06 exhibits better catalytic activity than the metallolinker-based MOF Zr-PdBF₄ and was not subject to leaching or catalyst degradation processes observed for the homogeneous analogue.

Carbon-Carbon Linked Organic Frameworks: An Explicit Summary and Analysis

Organic frameworks with carbon-carbon (CC) linkage are an important class of materials owing to their outstanding chemical stability and extended π-electron delocalization resulting in unique optoelectronic properties. In the first part of this review article, the design principles for the bottom-up synthesis of 2D and 3D sp/sp² CC linked organic frameworks are summarized. Representative reaction methodologies, such as Knoevenagel condensation, Aldol condensation, Horner-Wadsworth-Emmons reaction, Wittig reaction, and coupling reactions (Ullmann, Suzuki, Heck, Yamamoto, etc.) are included. This is discussed in the context of their reaction mechanism, reaction dynamics, and whether and why resulting in an amorphous or crystalline product. This is followed by a discussion of different state-of-the art bottom-up synthesis methodologies, like solvothermal, interfacial, and solid-state synthesis. In the second part, the structure-property relationships in CC linked organic frameworks with representative examples of organocatalysis, photo(electro)catalysis, energy storage and conversion, magnetism, and molecular storage and separation are analyzed. The importance of linkage type, building blocks, topology, and crystallinity of the framework material in connection with the structure-property relationship is highlighted. Finally, brief concluding remarks are presented based on the key development of bottom-up synthetic methods and provide perspectives for future development in this field.

Modification of bimetal Zn/ Mg MOF with nanoparticles Fe3O4 and Fe3O4@SiO2, investigation of the peroxidase-like activity of these compounds by calorimetry and fluorimetry methods

In this article; the bimetal metal-organic framework Zn/Mg (Zn/Mg MOF) is synthesized. Then Zn/Mg MOF bimetal was combined with Fe₃O₄ and Fe₃O₄@SiO₂, and composites of Fe₃O₄@ SiO₂/MOF/Dextrin, Fe₃O₄@SiO₂/MOF, Fe₃O₄@MOF/Dextrin and Fe₃O₄@MOF made. The peroxidase-like activity of these compounds was investigated and compared by calorimetric Resazurin (Rz) and O-phenylenediamine (OPD); (Rz-H₂O₂, OPD-H₂O₂) and fluorimetric Rz and terephtalic acid (TA); (Rz-H₂O₂, TA-H₂O₂). The Fe₃O₄@ MOF/Dextrin composite has the highest peroxidase-like activity. The effect factors (amount of pH (6), the values of TA (1.37 mM), H₂O₂ (0.025 mM), reaction time (8.15 min), and amount of Composite (116.67 mg)) to increase the catalytic activity of Fe₃O₄@ MOF/Dextrin measured by chemometrics method. The most suitable linear range of the calibration curve by the TA-H₂O₂ -Composite fluorimetric method is 1-600 μg L^-1, and the detection limit is 2.27 μg L^-1. The relative standard deviation (RSD%) for measuring concentration atropine 1 μg L^-1 (n = 6) is 1.18%. Finally, from this system for measuring atropine extracted by the Liquid-liquid extraction (LLE) method in two types of plants, D. Innoxia north and west and D. stramonium north and west of Iran (118.25 μg L^-1, 79.80 μg L^-1) and (18.477 μg L^-1, 9.27 μg L^-1) used, respectively.

Saiz P, Reizabal A, Wuttke S, Celaya-Azcoaga L, Valverde A, Fernández de Luis R. A State-of-the-Art of Metal-Organic Frameworks for Chromium Photoreduction vs. Photocatalytic Water Remediation

Hexavalent chromium (Cr(VI)) is a highly mobile cancerogenic and teratogenic heavy metal ion. Among the varied technologies applied today to address chromium water pollution, photocatalysis offers a rapid reduction of Cr(VI) to the less toxic Cr(III). In contrast to classic photocatalysts, Metal-Organic frameworks (MOFs) are porous semiconductors that can couple the Cr(VI) to Cr(III) photoreduction to the chromium species immobilization. In this minireview, we wish to discuss and analyze the state-of-the-art of MOFs for Cr(VI) detoxification and contextualizing it to the most recent advances and strategies of MOFs for photocatalysis purposes. The minireview has been structured in three sections: (i) a detailed discussion of the specific experimental techniques employed to characterize MOF photocatalysts, (ii) a description and identification of the key characteristics of MOFs for Cr(VI) photoreduction, and (iii) an outlook and perspective section in order to identify future trends.

A robust hollow metal-organic framework with enhanced diffusion for size selective catalysis

Single crystalline (SC) hollow metal-organic frameworks (MOFs) are excellent host materials for molecular and nanoparticle catalysts. However, due to synthetic challenges, chemically robust SC hollow MOFs are rare. This work reports the construction of a defect-free and chemically stable SC hollow MOF, MOF-801(h), through templated growth from a unit cell mismatched core, UiO-66. Under the protection of excess MOF-801 ligand, fumaric acid, the MOF-801 shell was perfectly retained while the isoreticular UiO-66 core was selectively and completely etched away by formic acid. The combination of a large cavity, small aperture and short diffusion length allows the Pt nanoparticle encapsulated composite catalyst, Pt⊂MOF-801(h), to perform size selective hydrogenation of nitro compounds at an accelerated speed. Impressively, the catalyst can undergo concentrated HCl or boiling water treatment while maintaining its crystallinity, morphology, catalytic activity, and size selectivity. In addition, Au nanoparticles encapsulated catalyst, Au⊂MOF-801(h), was used for the size selective nucleophilic addition of HCl to terminal alkynes for the first time, which is a harsh reaction involving high concentrations of a strong acid.

Anchoring Cu Species over SiO2 for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Recently, the Cu-based catalyst has attracted wide attention for the hydrogenation of dimethyl oxalate (DMO) to ethylene glycol (EG) due to its high catalytic activity and it is low cost. However, its poor stability, ease of agglomeration, and the short life of the catalyst restrict its further development in industrial applications. Here, we constructed a novel MOF-derived Cu/SiO2 catalyst (MOF-CmS for short) with a controllable distribution of Cu active sites for the hydrogenation of the DMO to EG reaction. The catalyst was prepared by a hydrothermal method with the HKUST-1 uniformly coated on the surface of the silica microspheres. After the calcination, the highly dispersed and uniform Cu species were loaded on the surface of the silica. The resulted MOF-CmS catalyst showed a 100% conversion of DMO and over 98% selectivity of EG at 200 °C and 2 MPa while a traditional Cu/SiO2 catalyst exhibited serious agglomeration of Cu active sites and low catalytic activity (DMO conversion of 86.9% and EG selectivity of 46.6%). It is believed that the highly dispersed active metal center and the interaction between the active metal and carrier were the main reasons for higher catalytic activity of the MOF-CmS catalyst. Therefore, the developed method opened another avenue to synthesize highly dispersed and stable Cu-based catalysts.

Ionic encapsulation of a methanol carbonylation catalyst in a microporous metal-organic framework

The anionic rhodium complex cis-[Rh(CO)₂I₂]^-, active in the Monsanto process for acetic acid production, has been heterogenised via Coulombic interactions in the pores of a UiO-66-type metal-organic framework (MOF). The MOF-supported catalyst is active for the carbonylation of methanol and is recyclable, retaining its framework crystallinity following catalysis. Intermediates in the catalytic cycle observed by IR spectroscopy confirm the same mechanism as the established homogeneous process.

Protein-Mimicking Nanoparticles in Biosystems

Proteins are essential elements for almost all life activities. The emergence of nanotechnology offers innovative strategies to create a diversity of nanoparticles (NPs) with intrinsic capacities of mimicking the functions of proteins. These artificial mimics are produced in a cost-efficient and controllable manner, with their protein-mimicking performances comparable or superior to those of natural proteins. Moreover, they can be endowed with additional functionalities that are absent in natural proteins, such as cargo loading, active targeting, membrane penetrating, and multistimuli responding. Therefore, protein-mimicking NPs have been utilized more and more often in biosystems for a wide range of applications including detection, imaging, diagnosis, and therapy. To highlight recent progress in this broad field, herein, representative protein-mimicking NPs that fall into one of the four distinct categories are summarized: mimics of enzymes (nanozymes), mimics of fluorescent proteins, NPs with high affinity binding to specific proteins or DNA sequences, and mimics of protein scaffolds. This review covers their subclassifications, characteristic features, functioning mechanisms, as well as the extensive exploitation of their great potential for biological and biomedical purposes. Finally, the challenges and prospects in future development of protein-mimicking NPs are discussed.

Microenvironment Regulation of {Co4IIO4} Cubane for Syngas Photosynthesis

It is a great challenging task for selectivity control of both CO₂ photoreduction and water splitting to produce syngas via precise microenvironment regulation. Herein, a series of UiO-type Eu-MOFs (Eu-bpdc, Eu-bpydc, Ru_x-Eu-bpdc, and Ru_x-Eu-bpydc) with different surrounding confined spaces were designed and synthesized. These photosensitizing Ru_x-Eu-MOFs were used as the molecular platform to encapsulate the [Co^II₄(dpy{OH}O)₄(OAc)₂(H₂O)₂]²⁺ (Co₄) cubane cluster for constructing Co₄@Ru_x-Eu-MOF (x = 0.1, 0.2, and 0.4) heterogeneous photocatalysts for efficient CO₂ photoreduction and water splitting. The H₂ and CO yields can reach 446.6 and 459.8 μmol·g^-1, respectively, in 10 h with Co₄@Ru_0.1-Eu-bpdc as the catalyst, and their total yield can be dramatically improved to 2500 μmol·g^-1 with the ratio of CO/H₂ ranging from 1:1 to 1:2 via changing the photosensitizer content in the confined space. By increasing the N content around the cubane, the photocatalytic performance drops sharply in Co₄@Ru_0.1-Eu-bpydc, but with an enhanced proportion of CO in the final products. In the homogeneous system, the Co₄ cubane was surrounding with Ru photosensitizers via week interactions, which can drive water splitting into H₂ with >99% selectivity. Comprehensive structure-function analysis highlights the important role of microenvironment regulation in the selectivity control via constructing homogeneous and heterogeneous photocatalytic systems. This work provides a new insight for engineering a catalytic microenvironment of the cubane cluster for selectivity control of CO₂ photoreduction and water splitting.

Surface-Seal Encapsulation of a Homogeneous Catalyst in a Mesoporous Metal-Organic Framework

A rapid surface sealing strategy has been developed for the encapsulation of a homogeneous catalyst, phosphotungstic acid (PTA), in a mesoporous metal-organic framework (MOF), MIL-101(Cr). This new surface polymerization method utilizes non-solvent-induced phase separation to concentrate and direct polyamine and dianhydride monomers onto MOF particle surfaces, thus realizing the formation of a sub-10 nm, uniform, and cross-linked polymer coating within a few seconds. While fully preserving the catalytic activity of the neat PTA for the catalytic decomposition of phenol, the surface-sealed PTA-MOF composite catalyst can be reused up to 10 times with no noticeable loss of activity and negligible leaching of PTA. Since this surface coating method is not limited by either the MOF or the catalyst, it will become the technique of choice for the immobilization of homogeneous catalysts in MOFs.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Transforming CO2 into Methanol with N-Heterocyclic Carbene-Stabilized Coinage Metal Hydrides Immobilized in a Metal-Organic Framework UiO-68

By synergizing the advantages of homogeneous and heterogeneous catalysis, single-site heterogeneous catalysis represents a highly promising opportunity for many catalytic processes. Particularly, the unprecedented designability and versatility of metal-organic frameworks (MOFs) promote them as salient platforms for designing single-site catalytic materials by introducing isolated, well-defined active sites into the frameworks. Herein, we design new MOF-supported single-site catalysts for CO₂ hydrogenation to methanol (CH₃OH), a reaction of great significance in CO₂ valorization. Specifically, N-heterocyclic carbene (NHC), a class of excellent modifiers and anchors, is used to anchor coinage metal hydrides M(I)-H (M = Cu, Ag, and Au) onto the organic linker of UiO-68. The strong metal-ligand interactions between NHC and M(I)-H verify the robustness and feasibility of our design strategy. On the tailor-made catalysts, a three-stage sequential transformation is proposed for CH₃OH synthesis with HCOOH and HCHO as the transit intermediates. A density functional theory-based comparative study suggests that UiO-68 decorated with NHC-Cu(I)-H performs best for CO₂ hydrogenation to HCOOH. This is further rationalized by three linear relationships for the Gibbs energy barrier of CO₂ hydrogenation to HCOO intermediate, the first with the NBO charge of the hydride in NHC-M(I)-H, the second with the electronegativity of M, and the third with the gap between the lowest unoccupied molecular orbital of CO₂ and the highest occupied molecular orbital of the catalyst. It is confirmed that the high efficiency of MOF-supported NHC-Cu(I)-H for CO₂ transformation to CH₃OH is via the proposed three-stage mechanism, and in each stage, the step involving heterolytic dissociation of H₂ together with product generation is the most energy-intensive. The rate-limiting step in the entire mechanism is identified to be H₂ dissociation accompanying with simultaneous HCHO and H₂O formation. Altogether, the tailor-made UiO-68 decorated with NHC-Cu(I)-H features well-defined active sites, enables precise manipulation of reaction paths, and demonstrates excellent reactivity for CO₂ hydrogenation to CH₃OH. It is also predicted to surpass a recently reported MOF-808 catalyst consisting of neighboring Zn²⁺-O-Zr⁴⁺ sites. The designed MOFs as well as the proposed strategy here establish a new paradigm and can be extended to other hydrogenation reactions.

Site-Isolated Azobenzene-Containing Metal-Organic Framework for Cyclopalladated Catalyzed Suzuki-Miyuara Coupling in Flow

Sites isolation of active metals centers, systematically studied in homogeneous systems, has been an alternative to develop low metal consuming, highly active next generation catalysts in heterogeneous condition. Because of the high porosity and facile synthetic procedures, MOF-based catalysts are excellent candidates for heterogenization of well-defined homogeneous catalysts. Herein, we report the direct Pd coordination on the azobenzene linker within a MOF catalyst through a postsynthetic modification method for a Suzuki-Miyaura coupling reaction. The immobilized cyclopalladated complexes in MOFs were analyzed by a series of characterization techniques including XPS, PXRD, and deuterium NMR (2H NMR) spectroscopy. The heterogeneous nature of the catalyst as well as its stability were demonstrated though "hot filtration" and recycling experiments. Furthermore, we demonstrate that the MOF packed column promoted the reaction between phenyl boronic acid and bromobenzene under microflow conditions with a 85% yield continuously for 12 h. This work sheds light on the potential of site-isolated MOF catalysts in efficient, recyclable and continuous flow systems for industrial application.

Tailoring Heterogeneous Catalysts at the Atomic Level: In Memoriam, Prof. Chia-Kuang (Frank) Tsung

Professor Chia-Kuang (Frank) Tsung made his scientific impact primarily through the atomic-level design of nanoscale materials for application in heterogeneous catalysis. He approached this challenge from two directions: above and below the material surface. Below the surface, Prof. Tsung synthesized finely controlled nanoparticles, primarily of noble metals and metal oxides, tailoring their composition and surface structure for efficient catalysis. Above the surface, he was among the first to leverage the tunability and stability of metal-organic frameworks (MOFs) to improve heterogeneous, molecular, and biocatalysts. This article, written by his former students, seeks first to commemorate Prof. Tsung's scientific accomplishments in three parts: (1) rationally designing nanocrystal surfaces to promote catalytic activity; (2) encapsulating nanocrystals in MOFs to improve catalyst selectivity; and (3) tuning the host-guest interaction between MOFs and guest molecules to inhibit catalyst degradation. The subsequent discussion focuses on building on the foundation laid by Prof. Tsung and on his considerable influence on his former group members and collaborators, both inside and outside of the lab.

Evolution of 14-Connected Zr6 Secondary Building Units through Postsynthetic Linker Incorporation

Two new zirconium MOFs, WSU-6 and WSU-7, were synthesized through postsynthetic modifications. In both cases, linker insertion was conducted on a MOF consisting of eight-connected (8-c) Zr6 cluster and four-connected (4-c) ETTC linker, WSU-5, which possesses the uncommon 4, 8-c scu-c topology. The insertion of 1, 4-benzenedicarboxylate into the MOF formed the new 4, 12-c mjh topology, WSU-6. Interestingly, when 2, 6-naphthalenedicarboxylate was inserted, WSU-7 can be formed, which possesses a new 4, 14-c jkz topology. WSU-7 contains very rare 14-c Zr6 secondary building units (SBUs) and is the first MOF to have a Zr6 SBUs with connectivity greater than 12. The three Zr-MOFs were structurally characterized, and the photoluminescence properties of the materials were also studied.

A novel 3D terbium metal-organic framework as a heterogeneous Lewis acid catalyst for the cyanosilylation of aldehyde

A novel 3D lanthanide(iii) metal-organic framework (MOF) (namely Tb-MOF), was synthesized by self-assembly from Tb(iii) ion nitrate and the rigid organic ligand H₂sbdc (H₂sbdc = 5,5-dioxo-5H-dibenzo[b,d]thiophene-3,7-dicarboxylic acid), and could work as an efficient heterogeneous catalyst for the cyanosilylation of aromatic aldehydes at room temperature. The obtained Tb-MOF has been characterized and analysed in detail by single crystal X-ray diffraction, powder X-ray diffraction, thermogravimetric analysis and so on. The pores of Tb-MOF provided a microenvironment that was beneficial for the substrates to be close to the Lewis acid catalytic sites. The IR spectrogram and the fluorescence titration proved that the substrates could be activated inside the channel of Tb-MOF. The heterogeneous Tb-MOF catalyst with fine catalytic efficiency exhibited a high TON (TON = 460), and could be recycled at least three times without significantly reducing its activity.

Atomically precise metal nanoclusters meet metal-organic frameworks

Significant progress has been made in both fields of atomically precise metal nanoclusters (NCs) and metal-organic frameworks (MOFs) in recent years. A promising direction is to integrate these two classes of materials for creating unique composites with improved properties for catalysis and other applications. NCs incorporated with MOFs exhibit an optimized catalytic performance in many catalytic reactions, in which MOFs play a vital supporting role or as cocatalysts. In this Perspective, we first provide a brief summary of the methods that have been developed for the preparation of NCs/MOF composites and the characteristics of these strategies are analyzed. Following that, some recent works are highlighted to demonstrate the crucial role of MOF matrices in the enhancement of NCs catalytic properties. Finally, we outline some potentially important aspects for future work. This Perspective is in hopes of stimulating more interest in the research on the integration of NCs with MOFs toward functional materials.

A new zeolitic lithium aluminum imidazolate framework

An aliovalent mixed-metal framework DUT-174 [LiAl(2-methylimidazolate)4]n, isostructural to ZIF-8, was synthesized from lithium aluminum hydride (LiAlH4) and 2-methylimidazole (2-mImH) through dehydrogenation. Lithium and aluminum cations acting as alternating framework nodes are coordinated tetrahedrally by (2-mIm)-. DUT-174 has a high specific surface area of 1149 m2 g-1 and CO2 uptake of 11.57 mmol g-1 at 195 K.

Trends and Prospects in UiO-66 Metal-Organic Framework for CO2 Capture, Separation, and Conversion

Among thousands of known metal-organic frameworks (MOFs), the University of Oslo's MOF (UiO-66) exhibits unique structure topology, chemical and thermal stability, and intriguing tunable properties, that have gained incredible research interest. This paper summarizes the structural advancement of UiO-66 and its role in CO₂ capture, separation, and transformation into chemicals. The first part of the review summarizes the fast-growing literature related to the CO₂ capture reported by UiO-66 during the past ten years. The second part provides an overview of various advancements in UiO-66 membranes in CO₂ purification. The third part describes the role of UiO-66 and its composites as catalysts for CO₂ conversion into useful products. Despite many achievements, significant challenges associated with UiO-66 are addressed, and future perspectives are comprehensively presented to forecast how UiO-66 might be used further for CO₂ management.

Copper(I) Complexes Containing PCP Ligand Catalyzed Hydrogenation of Carbon Dioxide to Formate under Ambient Conditions

The five new copper(I) complexes [Cu₂(μ-Cl)₂(κ¹-PCP^t-Bu)] (1), [Cu₂(μ-Br)₂(κ¹-PCP^t-Bu)] (2), [Cu₂(μ-I)₂(κ¹-PCP^t-Bu)] (3), [Cu₂(μ-CN)₂(κ¹-PCP^t-Bu)] (4), and [Cu₄(μ₃-SCN)₄(κ¹-PCP^t-Bu)₂]·CH₂Cl₂ (5) bearing a 1,3-bis[(di-tert-butylphosphino)methyl]benzene ligand were synthesized and characterized spectroscopically, and the molecular structures of 1, 3, and 5 were determined by single-crystal X-ray diffraction techniques. Structural studies for 1 and 3 revealed their binuclear structures with Cu···Cu separations of 2.609(3) and 2.6359(19) Å, respectively. However, 5 has a tetranuclear cubane structure with an 18-electron configuration at each copper without any metal-metal bonds. The two copper centers in 1 and 3 are bonded to one bridging PCP^t-Bu ligand in a κ¹-manner and two bridging (pseudo)halido ligands in a μ₂-bonding mode to generate a nonplanar Cu₂(μ-X)₂ framework. The four copper centers in 5 are at the vertices of a tetrahedron. Each copper center has pseudo-tetrahedral coordination provided by two bridging PCP^t-Bu ligands in a κ¹-manner and the four bridging thiocyanate groups in a μ₃-manner. These complexes were used as catalysts for the hydrogenation of CO₂ to formate in the presence of DBU as a base to produce valuable energy-rich chemicals, and therefore it is a promising, safe, and simple strategy to conduct reactions under ambient pressure at room temperature. Among all of the five copper(I) complex based catalysts, 3 displayed the best catalytic performance with turnover number (TON) values of 38-8700 in 12-48 h of reaction at 25-80 °C. The outstanding catalytic performance of [Cu₂(μ-I)₂(κ¹-PCP^t-Bu)] (3) makes it a potential candidate for realizing the large-scale production of formate by CO₂ hydrogenation.

CO2 hydrogenation over functional nanoporous polymers and metal-organic frameworks

CO₂ is one of the major environmental pollutants and its mitigation is attracting huge attention over the years due to continuous increase in this greenhouse gas emission in the atmosphere. Being environmentally hazardous and plentiful presence in nature, CO₂ utilization as C1 resource into fuels and feedstock is very demanding from the green chemistry perspectives. To accomplish this CO₂ utilization issue, functional organic materials like porous organic polymers (POPs), covalent organic frameworks (COFs) as well as organic-inorganic hybrid materials like metal-organic frameworks (MOFs), having characteristics of large surface area, high thermal stability and tunability in the porous nanostructures play significant role in designing the suitable catalyst for the CO₂ hydrogenation reactions. Although CO₂ hydrogenation is a widely studied and emerging area of research, till date review exclusively focused on designing POPs, COFs and MOFs bearing reactive functional groups is very limited. A thorough literature review on this matter will enrich our knowledge over the CO₂ hydrogenation processes and the catalytic sites responsible for carrying out these chemical transformations. We emphasize recent state-of-the art developments in POPs/COFs/MOFs having unique functionalities and topologies in stabilizing metallic NPs and molecular complexes for the CO₂ reduction reactions. The major differences between MOFs and porous organics are critically summarized in the outlook section with the aim of the future benefit in mitigating CO₂ emission from ambient air.

Biohybrid Systems for Improved Bioinspired, Energy-Relevant Catalysis

Biomimetic catalysts, ranging from small-molecule metal complexes to supramolecular assembles, possess many exciting properties that could address salient challenges in industrial-scale manufacturing. Inspired by natural enzymes, these biohybrid catalytic systems demonstrate superior characteristics, including high activity, enantioselectivity, and enhanced aqueous solubility, over their fully synthetic counterparts. However, instability and limitations in the prediction of structure-function relationships are major drawbacks that often prevent the application of biomimetic catalysts outside of the laboratory. Despite these obstacles, recent advances in synthetic enzyme models have improved our understanding of complicated biological enzymatic processes and enabled the production of catalysts with increased efficiency. This review outlines important developments and future prospects for the design and application of bioinspired and biohybrid systems at multiple length scales for important, biologically relevant, clean energy transformations.

Recent advances in visible-light-driven carbon dioxide reduction by metal-organic frameworks

Metal-organic frameworks (MOFs) have emerged as promising materials and have attracted researchers due to their unique chemical and physical properties-design flexibility, tuneable pore channels, a high surface-to-volume ratio that allow their distinct application in diverse research fields-gas storage, gas separation, catalysis, adsorption, drug delivery, ion exchange, sensing, etc. The rapidly growing CO₂ in the atmosphere is a global concern due to the excessive use of fossil fuels in the current era. CO₂ is the prime cause of global warming and should be ameliorated either through adsorption or conversion into value-added products to protect the environment and mankind. Nowadays, MOFs are exploited as a photocatalyst for applications of CO₂ reduction. Since the use of semiconductors limits the use of visible light for photocatalytic reduction of CO₂, MOFs are promising options. The current review describes recent development in the application of MOFs as host, composites, and their derivatives in photocatalytic reduction of CO₂ to CO and different organic chemicals (HCOOH, CH₃OH, CH₄). Efficient charge separation and visible light absorption by incorporation of active sites for efficient photocatalysis have been discussed. The selection of material for high CO₂ uptake and potential strategies for the rational design and development of high-performance catalysts are outlined. Major challenges and future perspectives have also been discussed at the last of the review.