Alkali-Driven Disassembly and Reassembly of Molecular Niobium Oxide in Water

Carbon Dioxide Capture by Niobium Polyoxometalate Fragmentation

High oxidation state metal cations in the form of oxides, oxoanions, or oxoperoxoanions have diverse roles in carbon dioxide removal (direct air capture and point source). Features include providing basic oxygens for chemisorption reactions, direct binding of carbonate, and catalyzing low-temperature CO2 release to regenerate capture media. Moreover, metal oxides and aqueous metal-oxo species are stable in harsh, point-source conditions. Here, we demonstrate aqueous niobium polyoxometalate (POM) carbon capture ability, specifically [Nb6O19]8-, Nb6. Upon exposure of aqueous Nb6 to CO2, Nb6 fragments and binds chemisorbed carbonate, evidenced by crystallization of Nb-carbonate POMs including [Nb22O53(CO3)16]28-and [Nb10O25(CO3)6]12-. While Rb/Cs+ counter cations yield crystal structures to understand the chemisorption processes, K+ counter cations enable higher capture efficiency (based on CO3/Nb ratio), determined by CHN analysis and thermogravimetry-mass spectrometry of the isolated solids. Sum frequency generation spectroscopy also showed higher carbon capture efficiency of the K-Nb6 solutions at the air-water interface, while small-angle X-ray scattering (SAXS) provided insights into the role of the alkalis in influencing these processes. Tetramethylammonium counter cations, like K+, demonstrate high efficiency of carbonate chemisorption at the interface, but SAXS and Raman of the bulk showed a predominance of a Nb24-POM (HxNb24O72, x ∼ 9) that does not bind carbonate. Control experiments show that carbonate detected at the interface is Nb-bound, and the Nb-carbonate species are stabilized by alkalis, demonstrating their supporting role in aqueous Nb-POM CO2 chemisorption. Of fundamental importance, this study presents rare examples of directing POM speciation with a gas, instead of liquid phase acid or base.

Spatiotemporal Studies of Soluble Inorganic Nanostructures with X-rays and Neutrons

This Review addresses the use of X-ray and neutron scattering as well as X-ray absorption to describe how inorganic nanostructured materials assemble, evolve, and function in solution. We first provide an overview of techniques and instrumentation (both large user facilities and benchtop). We review recent studies of soluble inorganic nanostructure assembly, covering the disciplines of materials synthesis, processes in nature, nuclear materials, and the widely applicable fundamental processes of hydrophobic interactions and ion pairing. Reviewed studies cover size regimes and length scales ranging from sub-Ångström (coordination chemistry and ion pairing) to several nanometers (molecular clusters, i.e. polyoxometalates, polyoxocations, and metal-organic polyhedra), to the mesoscale (supramolecular assembly processes). Reviewed studies predominantly exploit 1) SAXS/WAXS/SANS (small- and wide-angle X-ray or neutron scattering), 2) PDF (pair-distribution function analysis of X-ray total scattering), and 3) XANES and EXAFS (X-ray absorption near-edge structure and extended X-ray absorption fine structure, respectively). While the scattering techniques provide structural information, X-ray absorption yields the oxidation state in addition to the local coordination. Our goal for this Review is to provide information and inspiration for the inorganic/materials science communities that may benefit from elucidating the role of solution speciation in natural and synthetic processes.

Decaniobate: The Fruit Fly of Niobium Polyoxometalate Chemistry

ConspectusPolyoxometalates (POMs, metals = V4/5+, Nb5+, Ta5+, Mo5/6+, and W5/6+) can be described as molecular metal oxides. The V, Mo, and W-POMs (classic POMs) exhibit rich structural diversity with interesting redox properties, acid catalysis, inorganic ligands, and colorimetric properties and behavior. Nb and Ta POMs, while structurally similar, are generally stable only in base and redox behavior is rare, and they are synthetically far less accessible. The V, Mo, and W-POMs have been studied for well over a century, Nb-POM chemistry has emerged in the last 20 years, and Ta-POM chemistry is yet to see consistent and significant advances. Early and current success in Nb-POM chemistry is owed mainly to hydrothermal synthesis, which is wholly unsatisfying, given the black box nature of this technique.For the last 5 years and as summarized in this Account, we have exploited decaniobate, [Nb10O28]6- (Nb10), as a foundation to perform room-temperature, nearly pH-neutral manipulations of Nb-POM solutions. Nb10, with a rare neutral self-buffering pH, responds to any interactions with electrolytes (specifically oxoanions and metal cations) by undergoing transformations, leading to new topologies. The ease of Nb10 transformation yielding new generations of Nb-POMs, akin to an inorganic analogue of biological model organisms such as the fruit fly, inspired the title of this Account. The common building unit born from the disassembly of Nb10 is [Nb7O20(OH, H2O)2](5-7)-, and the hydroxyl/aqua ligands provide reactivity for linking via condensation reactions, ligand exchange, heterometals, or oxoanions. We can coax these newly assembled Nb-POMs (detected by small-angle X-ray scattering, SAXS) to crystallize via the usual methods of vapor diffusion, salting out, and reduced temperature, and the single-crystal X-ray diffraction structures are valuable for understanding reaction mechanisms to fine-tune control and yield a landscape of topologies and compositions. Beyond providing an opportunity to comprehend and diversify POM chemistry, the reactivity of Nb10 yields highly soluble (i.e., >2 M Nb), nearly neutral aqueous solutions of niobium, ideal for the solution-phase deposition of thin films, demonstrated with LiNbO3, (Na,K)NbO3, Nb2O5, and heterometal-doped Nb2O5. The obtained films are cohesive and smooth, enabled by the tendency of these solutions to gel if simply evaporated quickly.Per our current endeavors, this gelation behavior provides an opportunity to develop new soft, flexible materials including inorganic networks, organic-inorganic networks, and porous solids and explore their material properties including base catalysis and sorption (i.e., CO2). Nb-POM (and Ta-POM) discovery and implementation of properties is far from complete. While heterometal (d and f element) substitution is easy with classic POMs, imparting a whole host of functions (tuned luminescence, catalysis, electroactivity, etc.), it remains a challenge with Nb-POMs due to pH incompatibility with most heterometals. This grand challenge that defies fundamental aqueous behavior of metal cations requires the creation of liquid mixtures that include polymer and/or ionic liquid components, and the creation of such reaction media can impact synthesis beyond POM chemistry. The goal of this Account is to describe the recent advances in Nb-POM chemistry, afforded by the Nb10 "fruit fly", and to also provide insight into the next large steps needed to advance Nb-POM chemistry.

Aqueous solutions of super reduced polyoxotungstates as electron storage systems

Due to the increasing energy density demands of battery technology, it is vital to develop electrolytes with high electron storage capacity. Polyoxometalate (POM) clusters can act as electron sponges, storing and releasing multiple electrons and have potential as electron storage electrolytes for flow batteries. Despite this rational design of clusters for high storage ability can not yet be achieved as little is known about the features influencing storage ability. Here we report that the large POM clusters, {P5W30} and {P8W48}, can store up to 23 e- and 28 e- per cluster in acidic aqueous solution, respectively. Our investigations reveal key structural and speciation factors influencing the improved behaviour of these POMs over those previously reported (P2W18). We show, using NMR and MS, that for these polyoxotungstates hydrolysis equilibria for the different tungstate salts is key to explaining unexpected storage trends while the performance limit for {P5W30} and {P8W48}, can be attributed to unavoidable hydrogen generation, evidenced by GC. NMR spectroscopy, in combination with the MS analysis, provided experimental evidence for a cation/proton exchange process during the reduction/reoxidation process of {P5W30} which likely occurs due to this hydrogen generation. Our study offers a deeper understanding of the factors affecting the electron storage ability of POMs and provides insights allowing for further development of these materials for energy storage.

Gigantic supramolecular assemblies built from dynamic hierarchical organization between inorganic nanospheres and porphyrins

Noncovalent ionic interactions between nanosized Keplerate-type capsules {Mo₁₃₂} and tetra-cationic porphyrins have been investigated in aqueous solution using small-angle X-ray scattering, ¹H NMR and photophysical methods. These complementary multiscale methods reveal the formation of large hybrid oligomers built from a short-range organization in which the cationic porphyrin is glued onto the large POM surface. The local structuring appears to be strongly dependent on the dye : {Mo₁₃₂} ratio changing the morphology of the oligomers from linear to dense aggregates.

Computational Prediction of Speciation Diagrams and Nucleation Mechanisms: Molecular Vanadium, Niobium, and Tantalum Oxide Nanoclusters in Solution

Understanding the aqueous speciation of molecular metal-oxo-clusters plays a key role in different fields such as catalysis, electrochemistry, nuclear waste recycling, and biochemistry. To describe the speciation accurately, it is essential to elucidate the underlying self-assembly processes. Herein, we apply a computational method to predict the speciation and formation mechanisms of polyoxovanadates, -niobates, and -tantalates. While polyoxovanadates have been widely studied, polyoxoniobates and -tantalates lack the same level of understanding. First, we propose a pentavanadate cluster ([V₅O₁₄]^3-) as a key intermediate for the formation of the decavanadate. Our computed phase speciation diagram is in particularly good agreement with the experiments. Second, we report the formation constants of the heptaniobate, [Nb₇O₂₂]^9-, decaniobate, [Nb₁₀O₂₈]^6-, and tetracosaniobate [H₉Nb₂₄O₇₂]^15-. Additionally, we compute the speciation and phase diagram of niobium, which so far was restricted to Lindqvist derivates. Finally, we predict the formation constant of the decatantalate ([Ta₁₀O₂₆]^6-) in water, even though it had only been synthesized in toluene. Furthermore, we also calculate the corresponding speciation and phase diagrams for polyoxotantalates. Overall, we show that our method can be successfully applied to different families of molecular metal oxides without any need for readjustments; therefore, it can be regarded as a trustworthy tool for exploring polyoxometalates' chemistry.

Nb2O5, LiNbO3, and (Na, K)NbO3 Thin Films from High-Concentration Aqueous Nb-Polyoxometalates

Synthesizing functional materials from water contributes to a sustainable energy future. On the atomic level, water drives complex metal hydrolysis/condensation/speciation, acid-base, ion pairing, and solvation reactions that ultimately direct material assembly pathways. Here, we demonstrate the importance of Nb-polyoxometalate (Nb-POM) speciation in enabling deposition of Nb₂O₅, LiNbO₃, and (Na, K)NbO₃ (KNN) from high-concentration solutions, up to 2.5 M Nb for Nb₂O₅ and ∼1 M Nb for LiNbO₃ and KNN. Deposition of KNN from 1 M Nb concentration represents a potentially important advancment in lead-free piezoelectrics, an application that requires thick films. Solution characterization via small-angle X-ray scattering and Raman spectroscopy described the speciation for all precursor solutions as the [H_xNb₂₄O₇₂]^(x-24) POM, as did total pair distribution function analyses of X-ray scattering of amorphous gels prior to conversion to oxides. The tendency of the Nb₂₄-POM to form extended networks without crystallization leads to conformal and well-adhered films. The films were characterized by X-ray diffraction, atomic force microscopy, scanning electron microscopy, ellipsometry, and X-ray photoelectron spectroscopy. As a strategy to convert aqueous deposition solutions from {Nb₁₀}-POMs to {Nb₂₄}-POMs, we devised a general procedure to produce doped Nb₂O₅ thin films including Ca, Ag, and Cu doping.

Two novel telluroniobates with efficient catalytic activity for the imidation/amidation reaction

We present the synthesis and catalytic properties of two novel telluroniobates {Te₁₅Nb₂₁} and {Te₁₀Nb₁₄}. {Te₁₅Nb₂₁} is the first trimeric telluroniobate with the largest number of tellurium atoms in the Te-Nb system. Besides, both clusters exhibit excellent catalytic activity in the amidation reactions of anhydrides and amines, and cyclic imides and bi-amides can be controllably synthesized, which represents a breakthrough in the catalysis of polyoxoniobates.

Aqueous Stability of Zirconium Clusters, Including the Zr(IV) Hexanuclear Hydrolysis Complex [Zr6O4(OH)4(H2O)24]12+, from Density Functional Theory

Framework materials constitute a broad family of solids that range from zeolites and metal-organic frameworks (MOFs) to coordination polymers. The synthesis of such network structures typically rely on precursor molecular building blocks. As an example, the UiO-66 MOF series is constructed of hexanuclear [Zr₆O₄(OH)₄(CO₂)₁₂] cluster nodes and linear carboxylate linkers. Unfortunately, these Zr MOF cluster nodes cannot currently be manufactured in a sustainable way, motivating a search for "green" alternative synthesis methods. Stabilizing the hexanuclear Zr(IV) cluster (i.e., the hexamer, {Zr₆¹²⁺}) without the use of organic ligation would enable the use of environmentally friendly solvents such as water. The Zr(IV) tetranuclear cluster (i.e., the tetramer, {Zr₄⁸⁺}) can be stabilized in solution with or without organic ligands, yet the hexamer has yet to be synthesized without supporting ligands. The reasons why certain zirconium clusters are favored in aqueous solution over others are not well understood. This study reports the relative thermodynamic instability of the hypothetical hexamer {Zr₆¹²⁺} compared to the ubiquitous {Zr₄⁸⁺} tetramer. Density functional theory calculations were performed to obtain the hydrolysis Gibbs free energy of these species and used to construct Zr Pourbaix diagrams that illustrate the effects of electrochemical potential, pH, and Zr(IV) concentration. It was found that the aqueous {Zr₆¹²⁺} hexamer is ∼17.8 kcal/mol less stable than the aqueous {Zr₄⁸⁺} tetramer at pH = 0, V = 0, and [Zr(IV)] = 1 M, which is an energy difference on the order of counterion interactions. Electronic structure analyses were used to explore trends in the highest occupied molecular orbital-lowest unoccupied molecular orbital gap, frontier molecular orbitals, and electrostatic potential distribution of these clusters. The evidence suggests that the aqueous {Zr₆¹²⁺} hexamer may be promoted with more strategic syntheses incorporating minimal ligands and counterions.

High Proton-Conductivity in Covalently Linked Polyoxometalate-Organoboronic Acid-Polymers

The controlled bottom-up design of polymers with metal oxide backbones is a grand challenge in materials design, as it could give unique control over the resulting chemical properties. Herein, we report a 1D-organo-functionalized polyoxometalate polymer featuring a purely inorganic backbone. The polymer is self-assembled from two types of monomers, inorganic Wells-Dawson-type polyoxometalates, and aromatic organo-boronates. Their covalent linkage results in 1D polymer strands, which combine an inorganic oxide backbone (based on B-O and Nb-O linkages) with functional organic side-chains. The polymer shows high bulk proton conductivity of up to 1.59×10-1  S cm-1 at 90 °C and 98 % relative humidity. This synthetic approach could lead to a new class of organic-inorganic polymers where function can be designed by controlled tuning of the monomer units.

Deliberate Construction of Polyoxoniobates Exploiting the Carbonate Ligand

Polyoxometalates (POMs, metals=V^V , Nb^V , Ta^V , Mo^VI , W^VI ) are molecular metal oxides that can be isolated without capping ligands. The high negative charge of polyoxoniobates (PONb) provides strong interactions with heterocations, advantageous for electrostatic assembly of modular materials. In four single-crystal X-ray structures, we demonstrate that carbonate combined with the very reactive decaniobate [Nb₁₀ O₂₈ ]^6- reassembles into a new decaniobate, [Nb₁₀ O₂₅ (CO₃ )₆ ]^12- , featuring three carbonate-ligated Nb-polyhedra. These Nb-sites can be replaced by heterometals (lanthanides), and the tridentate carbonate can serve as an anchor point to build niobate-frameworks. Small-angle X-ray scattering and two additional X-ray structures reveal that the reaction pathway proceeds through a Nb₂₄ -PONb intermediate, and the obtained PONb (with or without carbonate) is counterion, temperature, and solvent-dependent (water or mixed water-methanol). This provides an uncommon level of control for PONb chemistry.

Molecular Vanadium Oxides for Energy Conversion and Energy Storage: Current Trends and Emerging Opportunities

Molecular vanadium oxides, or polyoxovanadates (POVs), have recently emerged as a new class of molecular energy conversion/storage materials, which combine diverse, chemically tunable redox behavior and reversible multielectron storage capabilities. This Review explores current challenges, major breakthroughs, and future opportunities in the use of POVs for energy conversion and storage. The reactivity, advantages, and limitations of POVs are explored, with a focus on their use in lithium and post-lithium-ion batteries, redox-flow batteries, and light-driven energy conversion. Finally, emerging themes and new research directions are critically assessed to provide inspiration for how this promising materials class can advance research in sustainable energy technologies.

Reactivity, Formation, and Solubility of Polyoxometalates Probed by Calorimetry

Room temperature calorimetry methods were developed to describe the energy landscapes of six polyoxometalates (POMs), Li-U24, Li-U28, K-U28, Li/K-U60, Mo132, and Mo154, in terms of three components: enthalpy of dissolution (ΔHdiss), enthalpy of formation of aqueous POMs (ΔHf,(aq)), and enthalpy of formation of POM crystals (ΔHf,(c)). ΔHdiss is controlled by a combination of cation solvation enthalpy and the favorability of cation interactions with binding sites on the POM. In the case of the four uranyl peroxide POMs studied, clusters with hydroxide bridges have lower ΔHf,(aq) and are more stable than those containing only peroxide bridges. In general for POMs, the combination of calorimetric results and synthetic observations suggest that spherical topologies may be more stable than wheel-like clusters, and ΔHf,(aq) can be accurately estimated using only ΔHf,(c) values owing to the dominance of the clusters in determining the energetics of POM crystals.

Directional Bonding in Decaniobate Inorganic Frameworks

Metal-oxo clusters offer an opportunity to assemble inorganic and metal-organic frameworks (MOFs) by a controlled building-block approach, which led to the revolutionary discoveries of zeolites and MOFs. Polyoxometalate clusters are soluble in water, but more challenging to link into frameworks; the inert oxo-caps that provide solubility are resistant to replacement or further connectivity. We demonstrate how the unique directional bonding and varying basicity of the decaniobate ([Nb₁₀ ]) oxo-caps can be exploited to build 1D, 2D, and 3D inorganic frameworks. In nine structures, A⁺ (A=Li, Na, K, Rb and Cs), AE²⁺ (AE=Ca, Sr, Ba) and Mn²⁺ demonstrate that the dimensionality of the obtained material is controlled by cation charge and size. Increased cation charge decreases selectivity for oxo-site bonding, leading to higher dimensional linking. Larger cation radii also decreases bonding selectivity, yielding higher dimensional materials. Ion-exchange studies of the A⁺ -Nb₁₀ family shows exclusive selectivity for Cs⁺ over other alkalis, which is important for radioactive Cs removal and sequestration.

Exploring the self-assembly of dumbbell-shaped polyoxometalate hybrids, from molecular building units to nanostructured soft materials

The formation of hierarchical nanostructures using preformed dumbbell-like species made of covalent organic-inorganic polyoxometalate (POM)-based hybrids is herein described. In this system, the presence of charged subunits (POM, metal linkers, and counter ions) in the complex molecular architecture can drive their aggregation, which results from a competition between the solvation energy of the discrete species and intermolecular electrostatic interactions. We show that the nature of the POM and the charge of the metal linker are key parameters for the hierarchical nanoorganization. The experimental findings were corroborated with a computational investigation combining DFT and molecular dynamics simulation methods, which outlines the importance of solvation of the counter ion and POM/counter ion association in the aggregation process. The dumbbell-like species can also form gels, in the presence of a poorer solvent, displaying similar nanoorganization of the aggregates. We show that starting from the designed molecular building units whose internal charges can be controlled by redox trigger we can achieve their implementation into soft nanostructured materials through the control of their supramolecular organization.

Ga3+ Incorporation into Al13 Keggin Polyoxometalates and the Formation of δ-(GaAl12)7+ and (Ga2.5Al28.5)19+ Polycations

Keggin-type polyaluminum species (ε-Al₁₃, δ-Al₁₃, Al₂₆, Al₃₀, Al₃₂) can form upon partial hydrolysis of Al³⁺-bearing solutions and are important species for water purification and contaminant transport. While the structural features for the major Al³⁺ polyaluminum species have been delineated, much less is known regarding heteroatom substitution and resultant structures other than the previously identified ε-GaAl₁₂⁷⁺ and ε-GeAl₁₂⁸⁺ cations. Single-atom substitution within polyaluminum species can change the surface reactivity within water treatment scenarios; thus, it is important to understand heteroatom incorporation within this system. The present work describes the synthesis and characterization of two novel Ga³⁺-substituted Keggin-type polyaluminum species. Na[GaO₄Al₁₂(OH)₂₄(H₂O)₁₂](2,6-NDS)₄(H₂O)_20.5 (δ-GaAl₁₂) and [Ga₂O₈Al_28.5Ga_0.5(OH)₅₈(H₂O)₂₇(SO₄)₂](SO₄)₄Cl₇(H₂O)_8.5 (Ga_2.5Al_28.5) were crystallized from a thermally aged, partially hydrolyzed Ga³⁺/Al³⁺ solution. Structural refinement from single-crystal X-ray diffraction indicated fully occupied Ga³⁺ within tetrahedral site(s) of both isolated species. Partial substitution was observed for octahedral sites for the larger Ga_2.5Al_28.5 cluster. The chemical compositions of both clusters were confirmed by inductively coupled plasma mass spectrometry (ICP-MS). Density functional theory (DFT) calculations corroborated the structural refinement, with the energetics of Ga³⁺ substitution suggesting preferential substitution within tetrahedral sites for both species. Additional theoretical work suggests that the rotated trimer in δ-GaAl₁₂ is highly reactive, which can serve as the driving force in the formation of the Ga_2.5Al_28.5 cluster.

Dynamics of Cation-Induced Conformational Changes in Nanometer-Sized Uranyl Peroxide Clusters

Conformational changes of the pyrophosphate (Pp)-functionalized uranyl peroxide nanocluster [(UO₂)₂₄(O₂)₂₄(P₂O₇)₁₂]^48- ({U₂₄Pp₁₂}), dissolved as a Li/Na salt, can be induced by the titration of alkali cations into solution. The most symmetric conformer of the molecule has idealized octahedral (O_h) molecular symmetry. One-dimensional ³¹P NMR experiments provide direct evidence that both K⁺ and Rb⁺ ions trigger an O_h-to-D_4h conformational change within {U₂₄Pp₁₂}. Variable-temperature ³¹P NMR experiments conducted on partially titrated {U₂₄Pp₁₂} systems show an effect on the rates; increased activation enthalpy and entropy for the D_4h-to-O_h transition is observed in the presence of Rb⁺ compared to K⁺. Two-dimensional, exchange spectroscopy ³¹P NMR revealed that magnetization transfer links chemically unique Pp bridges that are present in the D_4h conformation and that this magnetization transfer occurs via a conformational rearrangement mechanism as the bridges interconvert between two symmetries. The interconversion is triggered by the departure and reentry of K (or Rb) cations out of and into the cavity of the cluster. This rearrangement allows Pp bridges to interconvert without the need to break bonds. Cs ions exhibit unique interactions with {U₂₄Pp₁₂} clusters and cause only minor changes in the solution ³¹P NMR signatures, suggesting that O_h symmetry is conserved. Single-crystal X-ray diffraction measurements reveal that the mixed Li/Na/Cs salt adopts D_2h molecular symmetry, implying that while solvated, this cluster is in equilibrium with a more symmetric form. These results highlight the unusually flexible nature of the actinide-based {U₂₄Pp₁₂} and its sensitivity to countercations in solution.

Beyond Charge Balance: Counter-Cations in Polyoxometalate Chemistry

Polyoxometalates (POMs) are molecular metal-oxide anions applied in energy conversion and storage, manipulation of biomolecules, catalysis, as well as materials design and assembly. Although often overlooked, the interplay of intrinsically anionic POMs with organic and inorganic cations is crucial to control POM self-assembly, stabilization, solubility, and function. Beyond simple alkali metals and ammonium, chemically diverse cations including dendrimers, polyvalent metals, metal complexes, amphiphiles, and alkaloids allow tailoring properties for known applications, and those yet to be discovered. This review provides an overview of fundamental POM-cation interactions in solution, the resulting solid-state compounds, and behavior and properties that emerge from these POM-cation interactions. We will explore how application-inspired research has exploited cation-controlled design to discover new POM materials, which in turn has led to the quest for fundamental understanding of POM-cation interactions.

Polyoxometalates in solution: speciation under spotlight

The review covers stability and transformations of classical polyoxometalates in aqueous solutions and provides their ion-distribution diagrams over a wide pH range.

New pronounced progress in the synthesis of group 5 polyoxometalates

This highlight summarizes new developments made in group 5 polyoxometalate science of high nuclearity clusters with focus on synthetic approaches.

Aggregation Patterns in Low- and High-Charge Anions Define Opposite Solubility Trends

Molecular dynamics simulations in aqueous solution reveal the existence of two distinct patterns of aggregation in low and high charge density Lindqvist-type polyoxometalates (POMs). Our results indicate the presence of contact and solvent-shared ion pairs and specific and preferential interactions of alkalis with POMs. Highly charged POMs are capable of breaking apart the Li⁺ and Cs⁺ solvation shell, thus enhancing the formation of long-lived alkali-POM contact ion pairs, where alkalis act as an electrostatic "glue" forming large oligomers. Stronger ion pair interactions for Li⁺ than for Cs⁺ promote lower solubility for Li⁺ than for Cs⁺, evoking anomalous solubility trends. Lower charge density POMs are not capable of disrupting the Li⁺ solvation shell and only solvent-shared ion pairs are formed, whereas for Cs⁺, contact ion pairs exist. The large number of oxygen atoms in the POM surface enhances the hydrogen bonds between POM and water, thus promoting aggregation. In this case, aggregation follows normal solubility trends. Thus, aggregation depends on the strength of ion pair interactions, the capacity of POM to disrupt alkali's solvation shell, and the contact surface area between the solvent and POM.

Inorganic-Organic Hybrid Polyoxoniobates: Polyoxoniobate Metal Complex Cage and Cage Framework

The combination of polyoxoniobates (PONbs) with 3d metal ions, azoles, and organoamines is a general synthetic procedure for making unprecedented PONb metal complex cage materials, including discrete molecular cages and extended cage frameworks. By this method, the first two PONb metal complex cages K₄ @{[Cu₂₉ (OH)₇ (H₂ O)₂ (en)₈ (trz)₂₁ ][Nb₂₄ O₆₇ (OH)₂ (H₂ O)₃ ]₄ } and [Cu(en)₂ ]@{[Cu₂ (en)₂ (trz)₂ ]₆ (Nb₆₈ O₁₈₈ )} have been made. The former exhibits a huge tetrahedral cage with more than 120 metal centers, which is the largest inorganic-organic hybrid PONb known to date. The later shows a large cubic cage, which can act as building blocks for cage-based extended assembly to form a 3D cage framework {[Cu(en)₂ ]@{[Cu₂ (trz)₂ (en)₂ ]₆ [H₁₀ Nb₆₈ O₁₈₈ ]}}. These materials exhibit visible-light-driven photocatalytic H₂ evolution activity and high vapor adsorption capacity. The results hold promise for developing both novel cage materials and largely unexplored inorganic-organic hybrid PONb chemistry.

How Does the Redox State of Polyoxovanadates Influence the Collective Behavior in Solution? A Case Study with [I@V18O42] q- ( q = 3, 5, 7, 11, and 13)

A series of stable reduction-oxidation states of the cagelike [I@V^IV _xV^V_{18- x}O₄₂]^{5- x} polyoxovanadate (POV) with x = 8, 10, 12, 16, and 18 were studied with density functional theory and molecular dynamics to gain insight into the structural and electron distribution characteristics of these metal-oxo clusters and to analyze the charge/redox-dependent assemblage processes in water and acetonitrile (MeCN) solutions. The calculations show that the interplay between the POV redox state (molecular charge) and the solvent polarity, countercation size, and hydrophilicity (or hydrophobicity) controls the POV agglomeration phenomena, which substantially differ between aqueous and MeCN media. In MeCN, agglomeration is more pronounced for intermediate-charged POVs, whereas in water, the lowest-charged POVs and organic countercations tend to agglomerate into a microphase. Tests made on wet MeCN show diminished agglomeration with respect to pure MeCN. Simulations with alkali countercations in water show that only the highest-charged POV can form agglomerates. The herein presented theoretical investigation aims to support experimental studies of POVs in the field of functional nanomaterials and surfaces, where controlled molecular deposition from the liquid phase onto solid substrates requires knowledge about the features of these metal-oxo clusters in discrete solutions.

Assembly, disassembly and reassembly: a "top-down" synthetic strategy towards hybrid, mixed-metal {Mo10Co6} POM clusters

Polyoxometalates (POMs) are commonly prepared using a "bottom-up" synthetic procedure. The alternative "top-down" approach of disassembling a pre-formed POM unit to generate new synthetic intermediates is promising, but relatively comparatively underused. In this paper, a rationale for the top-down method is provided, demonstrating that this approach can generate compounds that are fundamentally inaccessible from simple bottom-up assembly. We demonstrate this principle through the synthesis of a series of 10, new, mixed-metal, hybrid compounds with the general formula [TBA]2[MoVI10CoII6O30(RpPO3)6(RcCOO)2(L)x(H2O)6] (TBA = tetrabutylammonium, Rp = phosphonate moiety, Rc = carboxylate moiety, L = pyridyl ligand, and x = 2-4), including a one-dimensional polyoxometalate-based coordination polymer. We propose that these structures are generated from {MoxO3x-1} fragments that cannot be accessed from bottom-up assembly alone. The POM clusters are stabilised by three distinct classes of organic ligand - organophosphonate, carboxylate and pyridyl ligands - which can each be substituted independantly, thus providing a controlled route to ligand functionalisation.