Catch–Release System for Dosing and Recycling Silver(I) Catalyst with Status of Catalytic Activity Reported by Fluorescence

Dynamic negative allosteric effect: regulation of catalysis via multicomponent rotor speed

Nanorotor R1 (420 kHz) was assembled from five components utilizing three orthogonal interactions. Post-modification at the distal position generated the advanced six component rotor R2 (45 kHz). The decrease in R2 speed leads to the inhibition of a three-component reaction by reducing catalyst release.

Rapid Access to Encapsulated Molecular Rotors via Coordination-Driven Macrocycle Formation

Macrocycle formation that relies upon trans metal coordination of appropriately placed pyridine ligands within an arylene ethynylene construct provides rapid and reliable access to molecular rotators encapsulated within macrocyclic stators. Showing no significant close contacts to the central rotators, X-ray crystallography of AgI -coordinated macrocycles provides plausibility for unobstructed rotation or wobbling of rotators within the central cavity. Solid-state 13 C NMR of PdII -coordinated macrocycles supports the notion of unobstructed movement of simple arenes in the crystal lattice. Solution 1 H NMR studies indicate complete and immediate macrocycle formation upon the introduction of PdII to the pyridyl-based ligand at room temperature. Moreover, the formed macrocycle is stable in solution; a lack of significant changes in the 1 H NMR spectrum upon cooling to -50 °C is consistent with the absence of dynamic behavior. The synthetic route to these macrocycles is expedient and modular, providing access to rather complex constructs in four simple steps involving Sonogashira coupling and deprotection reactions.

Three-Input Logic AND Gate Drives Sequential Three-Step Catalysis by Parallel Activation of H+ and Ag+ as a Catalyst Duo

Boolean operations with multiple catalysts as output are yet unknown using molecular logic. The issue is solved using a two-component ensemble, composed of a receptor and rotaxane, which acts as a three-input AND gate with a dual catalytic output. Actuation of the ensemble gate by the stoichiometric addition of metal ions (Ag⁺ and Cd²⁺) and 2,2,2-trifluoroacetic acid generated in the (1,1,1) truth table state a catalyst duo that synergistically enabled a three-step reaction, furnishing a dihydroisoquinoline as the output of a three-input logic AND gate operation.

Parallel Allosteric Inhibition of Shuttling Motion and Catalysis in a Silver(I)-loaded [2]Rotaxane

A dynamic silver(I)-loaded [2]rotaxane shuttle (k₂₉₈ = 135 kHz) was converted allosterically into a conformationally restricted [2]rotaxane due to the creation of a bulky imine in the center of the axle component. Only the dynamic silver(I)-loaded [2]rotaxane was able to catalyze a 6-endo-cyclization reaction, whereas the static one was catalytically quiet. The mechanism of catalyst deactivation was elucidated.

Multicomponent Pseudorotaxane Quadrilateral as Dual-Way Logic AND Gate with Two Catalytic Outputs

A multicomponent pseudorotaxane quadrilateral was reversibly toggled between three distinct switching states. Switching in the forward conversion was achieved by addition of H⁺ and K⁺ ions, and switching in the reverse direction was performed by addition of 18-crown-6 and 1-aza-18-crown-6. In both the forward and backward ways, the inputs operated an AND gate with distinct catalytic outputs. While in the forward direction the logic AND operation starting from a heteroleptic five-component assembly turned "ON" an imine hydrolysis as output (AND-1), in the inverse direction a Michael addition was ignited as the output starting from a seven-component aggregate following the AND gate logic (AND-2).

A dual-channel chemodosimetric sensor for discrimination between hypochlorite and nerve-agent mimic DCP: application on human breast cancer cells

A styryl bridge containing a triphenylamine-thioimidazole hydrazine-based dual-analyte-responsive fluorescent sensor was designed and synthesized for the detection of the nerve gas simulant diethyl chlorophosphate (DCP) and hypochlorite (OCl^-) for the first time. Hypochlorite induces oxidative intramolecular cyclization to give a triazole structure, which exhibited blue fluorescence with excellent selectivity and a low detection limit (8.05 × 10^-7 M) in solution. Conversely, the probe forms a phosphorylated intermediate with diethyl chlorophosphate, which undergoes further hydrolyzation and presents green fluorescence in a ratiometric mode with a low detection limit (3.56 × 10^-8 M). Additionally, the as-designed sensor was utilized to construct a portable kit for real-time monitoring of DCP in a discriminatory, simple and safe manner. Lastly, the probe was also productively employed for in situ imaging of OCl^- and DCP in the living cell.

Concurrent base and silver(I) catalysis pulsed by fuel acid

Treatment of a crown-ether receptor and a silver(I)-loaded cyclam derivative (NetState-I) with a fuel acid reversibly afforded the protonated cyclam and the silver(I)-loaded crown ether (NetState-II). While NetState-I was catalytically OFF, a base-catalysed Michael addition and a silver(I)-catalysed oxime cyclisation reaction was pulsed under dissipative conditions in NetState-II.

Ratiometric fluorescent probe for the on-site monitoring of coexisted Hg2+ and F- in sequence

The monitoring of mercury and fluoride ions (Hg²⁺ and F^-) has aroused wide concerns owing to the high toxicity of Hg²⁺ and the duplicitous nature of F^- to human health. As far as we known, more than 100 million people in poverty-stricken areas are still at high risk of being over-exposed to Hg²⁺ and F^- via drinking water. Simple and cost-effective luminescent methods are highly promising for on-site water monitoring in rural areas. However, the development of multipurpose luminescent probes that are accurate and sensitive remains challenging. Herein, a new strategy for rationally designing a multipurpose ratiometric probe is present. The obtained probe is consisted of two emission units with energy transfer between them, which exhibit high coordination affinities to the two coexisted toxic targets (Hg²⁺ and F^-), respectively. Thus, two distinct routes for efficiently modulating the energy transfer in the probe are present to trigger the responses to the two targets in sequence. By detecting the shift of the emission color with a smartphone, an on-site water monitoring method is successfully established with the detection limits as low as 2.7 nM for Hg²⁺ and 1.9 μM for F^-. The present study can expend the toolbox for water monitoring in rural regions.

New horizons for catalysis disclosed by supramolecular chemistry

The adoption of a supramolecular approach in catalysis promises to address a number of unmet challenges, ranging from activity (unlocking of novel reaction pathways) to selectivity (alteration of the innate selectivity of a reaction, e.g. selective functionalization of C-H bonds) and regulation (switch ON/OFF, sequential catalysis, etc.). Supramolecular tools such as reversible association and recognition, pre-organization of reactants and stabilization of transition states upon binding offer a unique chance to achieve the above goals disclosing new horizons whose potential is being increasingly recognized and used, sometimes reaching the degree of ripeness for practical use. This review summarizes the main developments that have opened such new frontiers, with the aim of providing a guide to researchers approaching the field. We focus on artificial supramolecular catalysts of defined stoichiometry which, under homogeneous conditions, unlock outcomes that are highly difficult if not impossible to attain otherwise, namely unnatural reactivity or selectivity and catalysis regulation. The different strategies recently explored in supramolecular catalysis are concisely presented, and, for each one, a single or very few examples is/are described (mainly last 10 years, with only milestone older works discussed). The subject is divided into four sections in light of the key design principle: (i) nanoconfinement of reactants, (ii) recognition-driven catalysis, (iii) catalysis regulation by molecular machines and (iv) processive catalysis.

18-Crown-6 Coordinated Metal Halides with Bright Luminescence and Nonlinear Optical Effects

The crown-ether coordination compounds ZnX₂(18-crown-6), EuX₂(18-crown-6) (X: Cl, Br, I), MnI₂(18-crown-6), Mn₃Cl₆(18-crown-6)₂, Mn₃I₆(18-crown-6)₂, and Mn₂I₄(18-crown-6) are obtained by ionic-liquid-based synthesis. Whereas MX₂(18-crown-6) (M: Zn, Eu) show conventional structural motives, Mn₃Cl₆(18-crown-6)₂, Mn₃I₆(18-crown-6)₂, and Mn₂I₄(18-crown-6) exhibit unusual single MnX₄ tetrahedra coordinated to the crown-ether complex. Surprisingly, some compounds show outstanding photoluminescence. Thus, rare Zn²⁺-based luminescence is observed and unexpectedly efficient for ZnI₂(18-crown-6) with a quantum yield of 54%. Unprecedented quantum yields are also observed for Mn₃I₆(18-crown-6)₂, EuBr₂(18-crown-6), and EuI₂(18-crown-6) with values of 98, 72, and 82%, respectively, which can be rationalized based on the specific structural features. Most remarkable, however, is Mn₂I₄(18-crown-6). Its specific structural features with finite sensitizer-activator couples result in an extremely strong emission with an outstanding quantum yield of 100%. Consistent with its structural features, moreover, anisotropic angle-dependent emission under polarized light and nonlinear optical (NLO) effects occur, including second-harmonic generation (SHG). The title compounds and their optical properties are characterized by single-crystal structure analysis, X-ray powder diffraction, chemical analysis, density functional theory (DFT) calculations, and advanced spectroscopic methods.

Toward Molecular Cybernetics - the Art of Communicating Chemical Systems

The emerging field of molecular cybernetics has the potential to widely broaden our perception of chemistry. Chemistry will develop beyond its current focus that is mainly concerned with single transformations, pure compounds, and/or defined mixtures. On this way, chemistry will become autonomous, networked and smart through communicating molecules each of which serves a control engineering purpose, like the set of wheels in the machinery of life. The present personal account describes our latest developments in this field.

Using multiple self-sorting for switching functions in discrete multicomponent systems

Over years self-sorting has developed into a powerful tool in supramolecular chemistry, for instance, to promote the error-free formation of intricate multicomponent assemblies. However, in order to use the enormous potential of self-sorting for sophisticated information processing more recent developments have focused on the reversible reconfiguration of multicomponent systems driven by multiple self-sorting protocols. The present mini review will provide an overview over the latest advancements in this field with a focus on reversibly switchable functions in discrete supramolecular systems.

Selective and reversible interconversion of nanosliders commanded by remote control via metal-ion signaling

A multi-device network mainly consisting of two two-component nanosliders was formed by self-sorting of six components. Addition/removal of zinc(ii) ions reversibly reorganized the network by chemical signaling involving the translocation of copper(i) from a relay station followed by the selective disassembly/assembly of one of both multi-component devices. The thus liberated machine parts served to erect a three-component nanoslider alongside the other unchanged two-component nanoslider.

Remote Control of the Synthesis of a [2]Rotaxane and its Shuttling via Metal-Ion Translocation

Remote control in an eight-component network commanded both the synthesis and shuttling of a [2]rotaxane via metal-ion translocation, the latter being easily monitored by distinct colorimetric and fluorimetric signals. Addition of zinc(II) ions to the red colored copper-ion relay station rapidly liberated copper(I) ions and afforded the corresponding zinc complex that was visualized by a bright sky blue fluorescence at 460 nm. In a mixture of all eight components of the network, the liberated copper(I) ions were translocated to a macrocycle that catalyzed formation of a rotaxane by a double-click reaction of acetylenic and diazide compounds. The shuttling frequency in the copper-loaded [2]rotaxane was determined to k 298=30 kHz (ΔH ≠=62.3±0.6 kJ mol-1, ΔS ≠=50.1±5.1 J mol-1 K-1, ΔG ≠ 298=47.4 kJ mol-1). Removal of zinc(II) ions from the mixture reversed the system back generating the metal-free rotaxane. Further alternate addition and removal of Zn2+ reversibly controlled the shuttling mode of the rotaxane in this eight-component network where the ion translocation status was monitored by the naked eye.

Selective detection of DABCO using a supramolecular interconversion as fluorescence reporter

The quantitative double self-sorting between the three-component rectangle [Cu₄(1)₂(2)₂]⁴⁺ and the four-component sandwich complex [Cu₂(1)(2)(4)]²⁺ is triggered by inclusion and release of DABCO (4). The fully reversible and clean switching between two multicomponent supramolecular architectures can be monitored by fluorescence changes at the zinc porphyrin sites. The structural changes are accompanied by a huge spatial contraction/expansion of the zinc porphyrin–zinc porphyrin distances that change from 31.2/38.8 Å to 6.6 Å and back. The supramolecular interconversion was used for the highly selective detection of DABCO in a mixture of other similar compounds.