Topochemical Synthesis of Single-Crystalline Hydrogen-Bonded Cross-Linked Organic Frameworks and Their Guest-Induced Elastic Expansion

Palladium-anchored calix[4]arene-derived porous organic polymer towards efficient hydrolytic cleavage of carbon disulfide

The release of carbon disulfide can have adverse effects on our environment and human health. The stability of carbon disulfide and the slow kinetics of hydrolysis can make it challenging to achieve efficient and practical cleavage of the CS bonds. Herein, a calix[4]arene-based porous organic polymer (CPOP-1) is innovatively synthesized through an optimized polycondensation reaction using C-Methylcalix[4]resorcinarene and hexafluoro-hexaazatriphenylene as monomers. Subsequently, palladium-induced calix[4]arene-based porous organic polymer was also synthesized via strong Pd-N coordination bonds to construct the metal-induced porous catalyst (CPOP-2). The polymeric catalyst active center [Pd2+(N^N)(NO3-)2] demonstrated outstanding catalytic hydrolysis performance (11.14 μmol g-1 h-1) in 10.5 h which is significantly enhanced by ca.13.2 times as compared to reported mononuclear Bpy-Pd(NO3)2, and 7.07 times than model trinuclear complex catalyst HATN-Pd-1, respectively. The control experiments revealed that POP catalysts showcased robust stability, prolonged effectiveness, and feasible recyclability during the hydrolytic cleavage of carbon disulfide at room temperature in aqueous solutions. Furthermore, the coordination environment of [Pd2+(N^N)] was validated through XPS, EXAFS, and isotope labeling measurements, and the hydrolysis cleavage products were confirmed e. g. CO2, sulfide, and protons. More importantly, a reaction mechanism was formulated coupled with theoretical calculations, and simulations. The proposed mechanism involves sequential OH- nucleophilic attacks on the carbon atoms of insert-coordinated CS2 and COS, leading to the cleavage of double CS bonds and the formation of CO bonds. The concurrent dissociation of the C-S bond and liberation of CO2 result in an intermediate structure characterized by [(N^N)Pd2+](SH-)2. This intermediate motif serves as the source of the thermodynamic driving force for the reaction.

Mechanoactivated amorphization and photopolymerization of styryldipyryliums

Conventional topochemical photopolymerization reactions occur exclusively in precisely-engineered photoactive crystalline states, which often produces high-insoluble polymers. To mitigate this, here, we report the mechanoactivation of photostable styryldipyrylium-based monomers, which results in their amorphization-enabled solid-state photopolymerization and produces soluble and processable amorphous polymers. A combination of solid-state nuclear magnetic resonance, X-ray diffraction, and absorption/fluorescence spectroscopy reveals the crucial role of a mechanically-disordered monomer phase in yielding polymers via photo-induced [2 + 2] cycloaddition reaction. Hence, mechanoactivation and amorphization can expand the scope of topochemical polymerization conditions to open up opportunities for generating polymers that are otherwise difficult to synthesize and analyze.

Ultradynamic Isoreticularly Expanded Porous Organic Crystals

Porous organic materials showcasing large framework dynamics present new paths for adsorption and separation with enhanced capacity and selectivity beyond the size-sieving limits, which is attributed to their guest-responsive sorption behaviors. Porous hydrogen-bonded crosslinked organic frameworks (HCOFs) are attractive for their remarkable ability to undergo guest-triggered expansion and contraction facilitated by their flexible covalent crosslinkages. However, the voids of HCOFs remain limited, which restrains the extent of the framework dynamics. In this work, we synthesized a series of HCOFs characterized by unprecedented size expansion capabilities induced by solvents. These HCOFs were constructed by isoreticularly co-crystallizing two complementary sets of hydrogen bonding building blocks to generate porous molecular crystals, which were crosslinked through thiol-ene/yne single-crystal-to-single-crystal transformations. The generated HCOFs exhibit enhanced chemical durability, high crystallinity, and extraordinary framework dynamics. For instance, HCOF-104 crystals featuring a pore diameter of 13.6 Å expanded in DMF to 300 ± 10% of their original lengths within just 1 min. This expansion allows the HCOFs to adsorb guest molecules that are significantly larger than the pore sizes of their crystalline states. Through methanol-induced contraction, these large guests were encapsulated in the fast-contracted HCOFs. These advancements in porous framework dynamics pave the way for new methods of encapsulating guests for targeted delivery.

Structural Design and Energy and Environmental Applications of Hydrogen-Bonded Organic Frameworks: A Systematic Review

Hydrogen-bonded organic frameworks (HOFs) are emerging porous materials that show high structural flexibility, mild synthetic conditions, good solution processability, easy healing and regeneration, and good recyclability. Although these properties give them many potential multifunctional applications, their frameworks are unstable due to the presence of only weak and reversible hydrogen bonds. In this work, the development history and synthesis methods of HOFs are reviewed, and categorize their structural design concepts and strategies to improve their stability. More importantly, due to the significant potential of the latest HOF-related research for addressing energy and environmental issues, this work discusses the latest advances in the methods of energy storage and conversion, energy substance generation and isolation, environmental detection and isolation, degradation and transformation, and biological applications. Furthermore, a discussion of the coupling orientation of HOF in the cross-cutting fields of energy and environment is presented for the first time. Finally, current challenges, opportunities, and strategies for the development of HOFs to advance their energy and environmental applications are discussed.

Topochemical-like bandgap regulation engineering: A bismuth thiooxide nanocatalyst for breast cancer phototherapy

The physical property tuning of nanomaterials is of great importance in energy, medicine, environment, catalysis, and other fields. Topochemical synthesis of nanomaterials can achieve precise control of material properties. Here, we synthesized a kind of element-doped bismuth-based nanomaterial (BOS) by topochemical-like synthesis and used it for the phototherapy of tumors. In this study, we employed bismuth fluoride nanoflowers as a template and fabricated element-doped bismuth oxide nanoflowers by reduction conditions. The product is consistent with the precursor in crystal structure and nanomorphology, realizing topochemical-like synthesis under mild conditions. BOS can generate reactive oxygen species, consume glutathione, and perform photothermal conversion under 730 nm light irradiation. In vitro and in vivo studies demonstrate that BOS could suppress tumor growth by inducing apoptosis and ferroptosis through phototherapy. Therefore, this study offers a general regulation method for tuning the physical properties of nanomaterials by using a topochemical-like synthesis strategy.

Charge-Assisted Ionic Hydrogen-Bonded Organic Frameworks: Designable and Stabilized Multifunctional Materials

Hydrogen-bonded organic frameworks (HOFs) are a class of crystalline framework materials assembled by hydrogen bonds. HOFs have the advantages of high crystallinity, mild reaction conditions, good solution processability, and reproducibility. Coupled with the reversibility and flexibility of hydrogen bonds, HOFs can be assembled into a wide diversity of crystalline structures. Since the bonding energy of hydrogen bonds is lower than that of ligand and covalent bonds, the framework of HOFs is prone to collapse after desolventisation and the stability is not high, which limits the development and application of HOFs. In recent years, numerous stable and functional HOFs have been developed by π-π stacking, highly interpenetrated networks, charge-assisted, ligand-bond-assisted, molecular weaving, and covalent cross-linking. Charge-assisted ionic HOFs introduce electrostatic attraction into HOFs to improve stability while enriching structural diversity and functionality. In this paper, we review the development, the principles of rational design and assembly of charge-assisted ionic HOFs, and introduces the different building block construction modes of charge-assisted ionic HOFs. Highlight the applications of charge-assisted ionic HOFs in gas adsorption and separation, proton conduction, biological applications, etc., and prospects for the diverse design of charge-assisted ionic HOFs structures and multifunctional applications.

Orthogonal Postsynthetic Copolymerization of Hydrogen-Bonded Organic Frameworks into a PolyHOF Membrane

Hydrogen-bonded organic frameworks (HOFs) have shown promise in various fields; however, the construction of HOF/polymer hybrid membranes that can maintain both structural and functional integrity remains challenging. In this study, we here fabricated a new HOF (HOF-50) with reserved polymerizable allyl group via charge-assisted H-bonds between the carboxylate anion and amidinium, and subsequently copolymerized the HOF with monomers to construct a covalently bonded HOF/polymer hybrid (polyHOF) membrane. The resulting polyHOF membrane not only exhibits customizable mechanical properties and extreme stability, but also shows an exceptional ratiometric luminescent temperature-sensing function with very high sensitivity and visibility even when the lanthanide content is two orders of magnitude lower than that of the reported mixed-lanthanide metal-organic frameworks (MOFs) and lanthanide-doped covalent organic frameworks (COFs). This orthogonal postsynthesis copolymerization strategy may provide a general approach for preparing covalently connected HOF/polymer hybrid membranes for diverse applications.

Massive Molecular Motion in Crystal Leads to an Unexpected Helical Covalent Polymer in a Solid-state Polymerization

We designed a proline-derived monomer with azide and alkene functional groups to enable topochemical ene-azide cycloaddition (TEAC) polymerization. In its crystal, the monomer forms supramolecular helices along the 'a' axis through various non-covalent interactions. Along the 'c' axis, the molecules arrange themselves head-to-tail in a wave-like pattern, positioning the azide and alkene groups of adjacent molecules in close proximity and anti-parallel orientation, complying with Schmidt's criteria for topochemical reaction. This prearranged configuration was expected to facilitate smooth topochemical polymerization, resulting in a 1,4-triazoline-linked polymer. Upon heating, the monomer underwent TEAC polymerization in a remarkable single-crystal-to-single-crystal fashion, but, to our surprise, it yielded an unexpected covalent helical polymer linked by 1,5-disubstituted triazoline units. Remarkably, the crystal avoids the ready-to-react arrangement for polymerization, but connects monomer molecules within the supramolecular helix through the cycloaddition of azide and alkene groups, even though they are not in close proximity nor in the expected orientation. This unexpected path, involving a substantial 134° rotation of the alkene group, yields hitherto unknown 1,5-disubstituted triazoline product regiospecifically. This study serves as a cautionary reminder that relying solely on topochemical postulates for predicting reactivity can sometimes be misleading.

Ultralight crystalline hybrid composite material for highly efficient sequestration of radioiodine

Considering the importance of sustainable nuclear energy, effective management of radioactive nuclear waste, such as sequestration of radioiodine has inflicted a significant research attention in recent years. Despite the fact that materials have been reported for the adsorption of iodine, development of effective adsorbent with significantly improved segregation properties for widespread practical applications still remain exceedingly difficult due to lack of proper design strategies. Herein, utilizing unique hybridization synthetic strategy, a composite crystalline aerogel material has been fabricated by covalent stepping of an amino-functionalized stable cationic discrete metal-organic polyhedra with dual-pore containing imine-functionalized covalent organic framework. The ultralight hybrid composite exhibits large surface area with hierarchical macro-micro porosity and multifunctional binding sites, which collectively interact with iodine. The developed nano-adsorbent demonstrate ultrahigh vapor and aqueous-phase iodine adsorption capacities of 9.98 g.g-1 and 4.74 g.g-1, respectively, in static conditions with fast adsorption kinetics, high retention efficiency, reusability and recovery.

Atomic observation and structural evolution of covalent organic framework rotamers

Dynamic 3D covalent organic frameworks (COFs) have shown concerted structural transformation and adaptive gas adsorption due to the conformational diversity of organic linkers. However, the isolation and observation of COF rotamers constitute undergoing challenges due to their comparable free energy and subtle rotational energy barrier. Here, we report the atomic-level observation and structural evolution of COF rotamers by cryo-3D electron diffraction and synchrotron powder X-ray diffraction. Specifically, we optimize the crystallinity and morphology of COF-320 to manifest its coherent dynamic responses upon adaptive inclusion of guest molecules. We observe a significant crystal expansion of 29 vol% upon hydration and a giant swelling with volume change up to 78 vol% upon solvation. We record the structural evolution from a non-porous contracted phase to two narrow-pore intermediate phases and the fully opened expanded phase using n-butane as a stabilizing probe at ambient conditions. We uncover the rotational freedom of biphenylene giving rise to significant conformational changes on the diimine motifs from synclinal to syn-periplanar and anticlinal rotamers. We illustrate the 10-fold increment of pore volumes and 100% enhancement of methane uptake capacity of COF-320 at 100 bar and 298 K. The present findings shed light on the design of smarter organic porous materials to maximize host-guest interaction and boost gas uptake capacity through progressive structural transformation.

Strong Electron Transfer in Covalently Integrating Cu(I)-Organic Frameworks Enabling Effective Radionuclide Capture

Rational construction of strong electron-transfer materials remains a challenging task. Herein, we show a design rule for the construction of strong electron-transfer materials through covalently integrating electron-donoring Cu(I) clusters and electron-withdrawing triazine monomers together. As expected, Cu-CTF-1 (Cu(I)-triazine framework) was found to enable strong electron transfer up to 0.46|e| from each Cu(I) metal center to each adjacent triazine fragment. This finally leads to good spatial separation in both photogenerated electron-hole pairs and function units for photocatalytic uranium reduction under ambience and no sacrificial agent and to good charge separation of [I+][I5-] for I2 immobilization under extremely rigorous conditions. The results have not only opened up a structural design principle to access electron-transfer materials but also solved several challenging tasks in the field of radionuclide capture and CTFs.

Single-Crystal One-Dimensional Porous Ladder Covalent Polymers

The synthesis of single-crystal, one-dimensional (1D) polymers is of great importance but a formidable challenge. Herein, we report the synthesis of single-crystal 1D ladder polymers in solution by dynamic covalent chemistry. The three-dimensional electron diffraction technique was used to rigorously solve the structure of the crystalline polymers, unveiling that each polymer chain is connected by double covalent bridges and all polymer chains are packed in a staggered and interlaced manner by π-π stacking and hydrogen bonding interactions, making the crystalline polymers highly robust in both thermal and chemical stability. The synthesized single-crystal polymers possess permanent micropores and can efficiently remove CO2 from the C2H2/CO2 mixture to obtain high-purity C2H2, validated by dynamic breakthrough experiments. This work demonstrates the first example of constructing single-crystal 1D porous ladder polymers with double covalent bridges in solution for efficient C2H2/CO2 separation.

Ortho-Alkoxy-benzamide Directed Formation of a Single Crystalline Hydrogen-bonded Crosslinked Organic Framework and Its Boron Trifluoride Uptake and Catalysis

Boron trifluoride (BF3 ) is a highly corrosive gas widely used in industry. Confining BF3 in porous materials ensures safe and convenient handling and prevents its degradation. Hence, it is highly desired to develop porous materials with high adsorption capacity, high stability, and resistance to BF3 corrosion. Herein, we designed and synthesized a Lewis basic single-crystalline hydrogen-bond crosslinked organic framework (HC OF-50) for BF3 storage and its application in catalysis. Specifically, we introduced self-complementary ortho-alkoxy-benzamide hydrogen-bonding moieties to direct the formation of highly organized hydrogen-bonded networks, which were subsequently photo-crosslinked to generate HC OFs. The HC OF-50 features Lewis basic thioether linkages and electron-rich pore surfaces for BF3 uptake. As a result, HC OF-50 shows a record-high 14.2 mmol/g BF3 uptake capacity. The BF3 uptake in HC OF-50 is reversible, leading to the slow release of BF3 . We leveraged this property to reduce the undesirable chain transfer and termination in the cationic polymerization of vinyl ethers. Polymers with higher molecular weights and lower polydispersity were generated compared to those synthesized using BF3  ⋅ Et2 O. The elucidation of the structure-property relationship, as provided by the single-crystal X-ray structures, combined with the high BF3 uptake capacity and controlled sorption, highlights the molecular understanding of framework-guest interactions in addressing contemporary challenges.

Hydrogen-Bonding Assembly Meets Anion Coordination Chemistry: Framework Shaping and Polarity Tuning for Xenon/Krypton Separation

Hybrid hydrogen-bonded (H-bonded) frameworks built from charged components or metallotectons offer diverse guest-framework interactions for target-specific separations. We present here a study to systematically explore the coordination chemistry of monovalent halide anions, i.e., F- , Cl- , Br- , and I- , with the aim to develop hybrid H-bond synthons that enable the controllable construction of microporous H-bonded frameworks exhibiting fine-tunable surface polarity within the adaptive cavities for realistic xenon/krypton (Xe/Kr) separation. The spherical halide anions, especially Cl- , Br- , and I- , are found to readily participate in the charge-assisted H-bonding assembly with well-defined coordination behaviors, resulting in robust frameworks bearing open halide anions within the distinctive 1D pore channels. The activated frameworks show preferential binding towards Xe (IAST Xe/Kr selectivity ca. 10.5) because of the enhanced polarizability and the pore confinement effect. Specifically, dynamic column Xe/Kr separation with a record-high separation factor (SF=7.0) among H-bonded frameworks was achieved, facilitating an efficient Xe/Kr separation in dilute, CO2 -containing gas streams exactly mimicking the off-gas of spent nuclear fuel (SNF) reprocessing.

Single-crystal polymers (SCPs): from 1D to 3D architectures

Single-crystal polymers (SCPs) with unambiguous chemical structures at atomic-level resolutions have attracted great attention. Obtaining precise structural information of these materials is critical as it enables a deeper understanding of the potential driving forces for specific packing and long-range order, secondary interactions, and kinetic and thermodynamic factors. Such information can ultimately lead to success in controlling the synthesis or engineering of their crystal structures for targeted applications, which could have far-reaching impact. Successful synthesis of SCPs with atomic level control of the structures, especially for those with 2D and 3D architectures, is rare. In this review, we summarize the recent progress in the synthesis of SCPs, including 1D, 2D, and 3D architectures. Solution synthesis, topochemical synthesis, and extreme condition synthesis are summarized and compared. Around 70 examples of SCPs with unambiguous structure information are presented, and their synthesis methods and structural analysis are discussed. This review offers critical insights into the structure-property relationships, providing guidance for the future rational design and bottom-up synthesis of a variety of highly ordered polymers with unprecedented functions and properties.

[M8L4]8+-Type Squares Self-Assembled by Dipalladium Corners and Bridging Aromatic Dipyrazole Ligands for Iodine Capture

Square-like metallamacrocyclic palladium(II) complexes [M₈L₄]⁸⁺ (1-7) were synthesized by reacting aromatic dipyrazole ligands (H₂L¹-H₂L³ with pyromellitic arylimide-, 1,4,5,8-naphthalenetetracarboxylic arylimide-, and anthracene-based aromatic groups, respectively) with dipalladium corners ([(bpy)₂Pd₂(NO₃)₂](NO₃)₂, [(dmbpy)₂Pd₂(NO₃)₂](NO₃)₂, or [(phen)₂Pd₂(NO₃)₂](NO₃)₂, where bpy = 2,2'-bipyridine, dmbpy = 4,4'-dimethyl-2,2'-bipyridine, and phen = 1,10-phenanthroline) in aqueous solutions via metal-directed self-assembly. Metallamacrocycles 1-7 were fully characterized by ¹H and ¹³C nuclear magnetic resonance spectroscopy and electrospray ionization mass spectrometry, and the square structure of 7·8NO₃^- was further confirmed via single crystal X-ray diffraction. These square-like metallamacrocycles exhibit effective performance for iodine adsorption.

Rational design and topochemical synthesis of polymorphs of a polymer

Packing a polymer in different ways can give polymorphs of the polymer having different properties. β-Turn forming peptides such as 2-aminoisobutyric acid (Aib)-rich peptides adopt several conformations by varying the dihedral angles. Aiming at this, a β-turn-forming peptide monomer would give different polymorphs and these polymorphs upon topochemical polymerization would yield polymorphs of the polymer, we designed an Aib-rich monomer N₃-(Aib)₃-NHCH₂-C[triple bond, length as m-dash]CH. This monomer crystallizes as two polymorphs and one hydrate. In all forms, the peptide adopts β-turn conformations and arranges in a head-to-tail manner with their azide and alkyne units proximally placed in a ready-to-react alignment. On heating, both the polymorphs undergo topochemical azide-alkyne cycloaddition polymerization. Polymorph I polymerized in a single-crystal-to-single-crystal (SCSC) fashion and the single-crystal X-ray diffraction analysis of the polymer revealed its screw-sense reversing helical structure. Polymorph II maintains its crystallinity during polymerization but gradually becomes amorphous upon storage. The hydrate III undergoes a dehydrative transition to polymorph II. Nanoindentation studies revealed that different polymorphs of the monomer and the corresponding polymers exhibited different mechanical properties, in accordance with their crystal packing. This work demonstrates the promising future of the marriage of polymorphism and topochemistry for obtaining polymorphs of polymers.

Topological Isomerism in Three-Dimensional Covalent Organic Frameworks

Although isomerism is a typical and significant phenomenon in organic chemistry, it is rarely found in covalent organic framework (COF) materials. Herein, for the first time, we report a controllable synthesis of topological isomers in three-dimensional COFs via a distinctive tetrahedral building unit under different solvents. Based on this strategy, both isomers with a dia or qtz net (termed JUC-620 and JUC-621) have been obtained, and their structures are determined by combining powder X-ray diffraction and transmission electron microscopy. Remarkably, these architectures show a distinct difference in their porous features; for example, JUC-621 with a qtz net exhibits permanent mesopores (up to ∼23 Å) and high surface area (∼2060 m² g^-1), which far surpasses those of JUC-620 with a dia net (pore size of ∼12 Å and surface area of 980 m² g^-1). Furthermore, mesoporous JUC-621 can remove dye molecules efficiently and achieves excellent iodine adsorption (up to 6.7 g g^-1), which is 2.3 times that of microporous JUC-620 (∼2.9 g g^-1). This work thus provides a new way for constructing COF isomers and promotes structural diversity and promising applications of COF materials.

Multifunctional Porous Hydrogen-Bonded Organic Frameworks: Current Status and Future Perspectives

Hydrogen-bonded organic frameworks (HOFs), self-assembled from organic or metalated organic building blocks (also termed as tectons) by hydrogen bonding, π-π stacking, and other intermolecular interactions, have become an emerging class of multifunctional porous materials. So far, a library of HOFs with high porosity has been synthesized based on versatile tectons and supramolecular synthons. Benefiting from the flexibility and reversibility of H-bonds, HOFs feature high structural flexibility, mild synthetic reaction, excellent solution processability, facile healing, easy regeneration, and good recyclability. However, the flexible and reversible nature of H-bonds makes most HOFs suffer from poor structural designability and low framework stability. In this Outlook, we first describe the development and structural features of HOFs and summarize the design principles of HOFs and strategies to enhance their stability. Second, we highlight the state-of-the-art development of HOFs for diverse applications, including gas storage and separation, heterogeneous catalysis, biological applications, sensing, proton conduction, and other applications. Finally, current challenges and future perspectives are discussed.

Guest-adaptive molecular sensing in a dynamic 3D covalent organic framework

Molecular recognition is an attractive approach to designing sensitive and selective sensors for volatile organic compounds (VOCs). Although organic macrocycles and cages have been well-developed for recognising organics by their adaptive pockets in liquids, porous solids for gas detection require a deliberate design balancing adaptability and robustness. Here we report a dynamic 3D covalent organic framework (dynaCOF) constructed from an environmentally sensitive fluorophore that can undergo concerted and adaptive structural transitions upon adsorption of gas and vapours. The COF is capable of rapid and reliable detection of various VOCs, even for non-polar hydrocarbon gas under humid conditions. The adaptive guest inclusion amplifies the host-guest interactions and facilitates the differentiation of organic vapours by their polarity and sizes/shapes, and the covalently linked 3D interwoven networks ensure the robustness and coherency of the materials. The present result paves the way for multiplex fluorescence sensing of various VOCs with molecular-specific responses.

A Crosslinked Ionic Organic Framework for Efficient Iodine and Iodide Remediation in Water

Iodine is widely used as an antimicrobial reagent for water disinfection in the wilderness and outer space, but residual iodine and iodide need to be removed for health reasons. Currently, it is challenging to remove low concentrations of iodine and iodide in water (≈5 ppm). Furthermore, the remediation of iodine and iodide across a broad temperature range (up to 90 °C) has not previously been investigated. In this work, we report a nitrate dimer-directed synthesis of a single-crystalline ionic hydrogen-bonded crosslinked organic framework (H_C OF-7). H_C OF-7 removes iodine and iodide species in water efficiently through halogen bonding and anion exchange, reducing the total iodine concentration to 0.22 ppm at room temperature. Packed H_C OF-7 columns were employed for iodine/iodide breakthrough experiments between 23 and 90 °C, and large breakthrough volumes were recorded (≥18.3 L g^-1 ). The high iodine/iodide removal benchmarks recorded under practical conditions make H_C OF-7 a promising adsorbent for water treatment.

Side‐Chain Control of Topochemical Polymer Single Crystals with Tunable Elastic Modulus

Topochemical polymerizations hold the promise of producing high molecular weight and stereoregular single crystalline polymers by first aligning monomers before polymerization. However, monomer modifications often alter the crystal packing and result in non-reactive polymorphs. Here, we report a systematic study on the side chain functionalization of the bis(indandione) derivative system that can be polymerized under visible light. Precisely engineered side chains help organize the monomer crystals in a one-dimensional fashion to maintain the topochemical reactivity. By optimizing the side chain length and end group of monomers, the elastic modulus of the resulting polymer single crystals can also be greatly enhanced. Lastly, using ultrasonication, insoluble polymer single crystals can be processed into free-standing and robust polymer thin films. This work provides new insights on the molecular design of topochemical reactions and paves the way for future applications of this fascinating family of materials.

Solvent-Triggered Fast and Visible Switching between Cage- and Channel-Type Hydrogen-Bonded Organic Frameworks

The inherent weak bonding nature of hydrogen-bonded organic frameworks (HOFs) performs like a double-edged sword in that it endows HOFs with superiority in processability and dynamicity but deactivates its on-demand controllability in the crystalline phase. Herein, based on the synergy of dynamic H-bonding interactions and the tailored low solubility in common organic solvents, reversible and fast topological transitions between cage- and channel-type HOFs were achieved upon immersing in the solution state. The aggregation-induced-emission character of the tecton facilitates the visualization of the elusive initial transition process with high sensitivity. In addition, the visible transition from cage- and channel-type HOFs to thermally stable crystalline phases is also achieved under thermal induction.

Design Rules of Hydrogen-Bonded Organic Frameworks with High Chemical and Thermal Stabilities

Hydrogen-bonded organic frameworks (HOFs), self-assembled from strategically pre-designed molecular tectons with complementary hydrogen-bonding patterns, are rapidly evolving into a novel and important class of porous materials. In addition to their common features shared with other functionalized porous materials constructed from modular building blocks, the intrinsically flexible and reversible H-bonding connections endow HOFs with straightforward purification procedures, high crystallinity, solution processability, and recyclability. These unique advantages of HOFs have attracted considerable attention across a broad range of fields, including gas adsorption and separation, catalysis, chemical sensing, and electrical and optical materials. However, the relatively weak H-bonding interactions within HOFs can potentially limit their stability and potential use in further applications. To that end, this Perspective highlights recent advances in the development of chemically and thermally robust HOF materials and systematically discusses relevant design rules and synthesis strategies to access highly stable HOFs.

Topochemical Postulates: Are They Relevant for Topochemical Reactions Occurring at Elevated Temperatures?

A rigid inositol-derived monomer functionalized with azide and alkyne as the complementary reactive groups (CRGs) crystallized as three distinct polymorphs I-III. Despite the unsuitable orientation of CRGs in the crystals for complete polymerization, all the three polymorphs underwent regiospecific and quantitative topochemical azide-alkyne cycloaddition (TAAC) polymerization upon heating to yield three different polymorphs of 1,2,3-triazol-1,4-diyl-linked-poly-neo-inositol. The molecules in these polymorphs exploit the weak intermolecular interactions, free space in the crystal lattice, and heat energy for their large and cooperative molecular motion to attain a transient reactive orientation, ultimately leading to the regiospecific TAAC reaction yielding distinct crystalline polymers. This study cautions that the overreliance on topochemical postulates for the prediction of topochemical reactivity at high temperatures could be misleading.

Efficient and simultaneous capture of iodine and methyl iodide achieved by a covalent organic framework

Radioactive molecular iodine (I₂) and organic iodides, mainly methyl iodide (CH₃I), coexist in the off-gas stream of nuclear power plants at low concentrations, whereas few adsorbents can effectively adsorb low-concentration I₂ and CH₃I simultaneously. Here we demonstrate that the I₂ adsorption can occur on various adsorptive sites and be promoted through intermolecular interactions. The CH₃I adsorption capacity is positively correlated with the content of strong binding sites but is unrelated to the textural properties of the adsorbent. These insights allow us to design a covalent organic framework to simultaneously capture I₂ and CH₃I at low concentrations. The developed material, COF-TAPT, combines high crystallinity, a large surface area, and abundant nucleophilic groups and exhibits a record-high static CH₃I adsorption capacity (1.53 g·g⁻¹ at 25 °C). In the dynamic mixed-gas adsorption with 150 ppm of I₂ and 50 ppm of CH₃I, COF-TAPT presents an excellent total iodine capture capacity (1.51 g·g⁻¹), surpassing various benchmark adsorbents. This work deepens the understanding of I₂/CH₃I adsorption mechanisms, providing guidance for the development of novel adsorbents for related applications.

Radioactive molecular iodine (I₂) and methyl iodide (CH₃I) coexist in the off-gas stream of nuclear power plants at low concentrations and only few adsorbents can effectively adsorb low-concentration I₂ and CH₃I simultaneously. Here, the authors demonstrate simultaneous capture of I₂ and CH₃I at low concentrations by exploiting different adsorptive sites in a covalent organic framework.

Robust Mesoporous Functional Hydrogen-Bonded Organic Framework for Hypochlorite Detection

Although tremendous progress has been achieved in the field of hydrogen-bonded organic frameworks (HOFs), the low stability, small/none pores, and difficult functionality severely obstruct their development. Herein, a novel robust mesoporous HOF (HOF-FAFU-1) decorated with a high density of free hydroxy moieties has been designed and readily synthesized in the de novo synthesis. In HOF-FAFU-1, the planar building blocks are connected to each other by typical intermolecular carboxylate dimers to form two-dimensional (2D) layers with sql topology, which are further connected to their adjacent layers by face-to-face π-π interactions to obtain a three-dimensional (3D) open mesoporous framework. Owing to the high density of intermolecular hydrogen bonding and strong π-π interactions, HOF-FAFU-1 is very stable, allowing it to retain its structure in aqueous solutions with a pH range of 1-9. Benefiting from the decorated hydroxy moieties, HOF-FAFU-1 was exploited as a fluorescent sensor for hypochlorite detection in water media by a turn-off mode, which cannot be realized by its nonhydroxy groups anchoring counterpart (HOF-TCBP). The proposed sensing system is highly efficient, validated by a very broad linear range (0-0.45 mM), fast response (15 s), and small limit of detection (LOD) (1.32 μM). The fluorescent quenching of HOF-FAFU-1 toward hypochlorite was also investigated, mainly being ascribed to the transformation of building blocks from the fluorescent reduced state to the nonfluorescent oxidative state. This work not only demonstrates that HOFs integrated with high stability and large pores as well as high density of functional groups can be simultaneously realized by judicious design of building blocks but also conceptually elucidates that such HOFs can effectively extend the application fields of HOFs.

Chemically Stable Guanidinium Covalent Organic Framework for the Efficient Capture of Low-Concentration Iodine at High Temperatures

The capture of radioactive I₂ vapor from nuclear waste under industrial operating conditions remains a challenging task, as the practical industrial conditions of high temperature (≥150 °C) and low I₂ concentration (∼150 ppmv) are unfavorable for I₂ adsorption. We report a novel guanidinium-based covalent organic framework (COF), termed TGDM, which can efficiently capture I₂ under industrial operating conditions. At 150 °C and 150 ppmv I₂, TGDM exhibits an I₂ uptake of ∼30 wt %, which is significantly higher than that of the industrial silver-based adsorbents such as Ag@MOR (17 wt %) currently used in the nuclear fuel reprocessing industry. Characterization and theoretical calculations indicate that among the multiple types of adsorption sites in TGDM, only ionic sites can bond to I₂ through strong Coulomb interactions under harsh conditions. The abundant ionic groups of TGDM account for its superior I₂ capture performance compared to various benchmark adsorbents. In addition, TGDM exhibits exceptionally high chemical and thermal stabilities that fully meet the requirements of practical radioactive I₂ capture (high-temperature, humid, and acidic environment) and differentiate it from other ionic COFs. Furthermore, TGDM has excellent recyclability and low cost, which are unavailable for the current industrial silver-based adsorbents. These advantages make TGDM a promising candidate for capturing I₂ vapor during nuclear fuel reprocessing. This strategy of incorporating chemically stable ionic guanidine moieties in COF would stimulate the development of new adsorbents for I₂ capture and related applications.

Coordination-bond-directed synthesis of hydrogen-bonded organic frameworks from metal-organic frameworks as templates

Controlled synthesis of hydrogen-bonded organic frameworks (HOFs) remains challenging, because the self-assembly of ligands is not only directed by weak hydrogen bonds, but also affected by other competing van der Waals forces. Herein, we demonstrate the coordination-bond-directed synthesis of HOFs using a preformed metal-organic framework (MOF) as the template. A MOF (CuI-TTFTB) based on two-coordinated CuI centers and tetrathiafulvalene-tetrabenzoate (TTFTB) ligands was initially synthesized. CuI-TTFTB was subsequently oxidized to the intermediate (CuII-TTFTB) and hydrated to the HOF product (TTFTB-HOF). Single-crystal-to-single-crystal (SC-SC) transformation was realized throughout the MOF-to-HOF transformation so that the evolution of structures was directly observed by single-crystal X-ray diffraction. The oxidation and hydration of the CuI center are critical to breaking the Cu-carboxylate bonds, while the synergic corbelled S⋯S and π⋯π interactions in the framework ensured stability of materials during post-synthetic modification. This work not only provided a strategy to guide the design and discovery of new HOFs, but also linked the research of MOFs and HOFs.

Secondary Structure Tuning of a Pseudoprotein Between β-Meander and α-Helical Forms in the Solid-State

Tuning the secondary structure of a protein or polymer in the solid-state is challenging. Here we report the topochemical synthesis of a pseudoprotein and its secondary structure tuning in the solid-state. We designed the dipeptide monomer N₃ -Leu-Ala-NH-CH₂ -C≡CH (1) for topochemical azide-alkyne cycloaddition (TAAC) polymerization. Dipeptide 1 adopts an anti-parallel β-sheet-like stacked arrangement in its crystals. Upon heating, the dipeptide undergoes quantitative TAAC polymerization in a crystal-to-crystal fashion yielding large polymers. The reaction occurs between the adjacent monomers in the H-bonded anti-parallel stack, yielding pseudoprotein having a β-meander structure. When dissolved in methanol, this pseudoprotein changes its secondary structure from β-meander to α-helical form and it retains the new secondary structure upon desolvation. This work demonstrates a novel paradigm for tuning the secondary structure of a polymer in the solid-state.

Ionic Functionalization of Multivariate Covalent Organic Frameworks to Achieve an Exceptionally High Iodine-Capture Capacity

Adsorption-based iodine (I₂ ) capture has great potential for the treatment of radioactive nuclear waste. In this study, we apply a "multivariate" synthetic strategy to construct ionic covalent organic frameworks (iCOFs) with a large surface area, high pore volume, and abundant binding sites for I₂ capture. The optimized material iCOF-AB-50 exhibits a static I₂ uptake capacity of 10.21 g g^-1 at 75 °C and a dynamic uptake capacity of 2.79 g g^-1 at ≈400 ppm I₂ and 25 °C, far exceeding the performances of previously reported adsorbents under similar conditions. iCOF-AB-50 also exhibits fast adsorption kinetics, good moisture tolerance, and full reusability. The promoting effect of ionic groups on I₂ adsorption has been elucidated by experimentally identifying the iodine species adsorbed at different sites and calculating their binding energies. This work demonstrates the essential role of balancing the textural properties and binding sites of the adsorbent in achieving a high I₂ capture performance.

Single-crystal-to-single-crystal synthesis of a pseudostarch via topochemical azide-alkyne cycloaddition polymerization

There is high demand for polysaccharide-mimics as enzyme-stable substitutes for polysaccharides for various applications. Circumventing the problems associated with the solution-phase synthesis of such polymers, we report here the synthesis of a crystalline polysaccharide-mimic by topochemical polymerization. By crystal engineering, we designed a topochemically reactive crystal of a glucose-mimicking monomer decorated with azide and alkyne units. In the crystal, the monomers arrange in head-to-tail fashion with their azide and alkyne groups in a ready-to-react antiparallel geometry, suitable for their topochemical azide-alkyne cycloaddition (TAAC) reaction. On heating the crystals, these pre-organized monomer molecules undergo regiospecific TAAC polymerization, yielding 1,4-triazolyl-linked pseudopolysaccharide (pseudostarch) in a single-crystal-to-single-crystal manner. This crystalline pseudostarch shows better thermal stability than its amorphous form and many natural polysaccharides.

A Solid Transformation into Carboxyl Dimers Based on a Robust Hydrogen-Bonded Organic Framework for Propyne/Propylene Separation

Self-assembly of N,N,N',N'-tetrakis(4-carboxyphenyl)-1,4-phenylenediamine with the help of different solvents provides isostructural hydrogen-bonded organic frameworks (HOF-30). Single-crystal X-ray diffraction (SCXRD) analysis reveals HOF-30 possesses 3D ten-fold interpenetrated dia nets connected by two kinds of hydrogen bonds, namely solvent-bridged carboxyl dimers and carboxyl⋅⋅⋅carboxyl dimers. Degassing treatment for HOF-30 yields HOF-30a with 3D ten-fold interpenetrated dia nets but linked with sole carboxyl⋅⋅⋅carboxyl dimers. Reversible hydrogen-bond-to-hydrogen-bond transformation between solvent-bridged carboxyl dimers in HOF-30 and carboxyl⋅⋅⋅carboxyl dimers in HOF-30a has been unveiled by single-crystal and powder X-ray diffraction. In addition, HOF-30a enables the selective adsorption of propyne over propylene according to single-component sorption and breakthrough experiments. The preferred propyne location in HOF has also been identified by SCXRD test.

A Heteromeric Carboxylic-acid-based Single Crystalline Crosslinked Organic Framework

The development of large pore single-crystalline covalently linked organic frameworks is critical in revealing the detailed structure-property relationship with substrates. One emergent approach is to photo-crosslink hydrogen-bonded molecular crystals. Introducing complementary hydrogen-bonded carboxylic acid building blocks is promising to construct large pore networks, but these molecules often form interpenetrated networks or non-porous solids. Herein, we introduced heteromeric carboxylic acid dimers to construct a non-interpenetrated molecular crystal. Crosslinking this crystal precursor with dithiols afforded a large pore single-crystalline hydrogen-bonded crosslinked organic framework HCOF-101. X-ray diffraction analysis revealed HCOF-101 as an interlayer connected hexagonal network, which possesses flexible linkages and large porous channels to host a hydrazone photoswitch. Multicycle Z/E-isomerization of the hydrazone took place reversibly within HCOF-101, showcasing the potential use of HCOF-101 for optical information storage.

Guest-Regulated Luminescence and Force-Stimuli Response of a Hydrogen-Bonded Organic Framework

Guest molecules may endow porous materials with new or enhanced properties as well as functions. Here, a porous hydrogen-bonded organic framework (HOF) constructed from a three-armed triphenylamine derivative is used to investigate how guests regulate photoluminescence and trigger force-stimuli response. It was found that guest solvents in pores might regulate HOF's luminescence. Interestingly, acetic acid as a guest endowed HOF materials with longer emission wavelengths and triggered the responses to mechanical force stimuli. Under shear force, an obvious blueshift in emission spectra was observed because of the loss of free guests and the conversion of π-stacking model. Further blue-shifted emission appeared while the bound guests were completely removed by heating. Mechanofluorochromic HOF materials could be regenerated through recrystallization and adsorbing guest. Conversely, HOFs with other guests and activated HOFs only resulted in a slight change in their fluorescence behaviors after force stimuli.