Radical-Induced Hierarchical Self-Assembly Involving Supramolecular Coordination Complexes in Both Solution and Solid States

Supramolecular Chiral Aggregation of Porphyrin Induced by Photo-Generated Triphenylamines Radical Cations

Here, it is shown that photoirradiation triggered chiral J-aggregates formation of an achiral anionic porphyrin, TPPS (tetrakis(4-sulfonatophenyl) porphyrin), in the presence of chiral triphenylamine (TPA) derivatives. A series of chiral triarylamines linked with aromatic rings is designed through urea or amide bonds. UV-irradiation of self-assembled urea-linked triphenylamine derivatives causes the formation of persistent radical cations in the chlorinated solvents, which subsequently induces the aggregation of TPPS. Transferring chirality of TPA derivatives to achiral TPPS J-aggregates leads to the chiral assemblies with remarkable chiroptical signals. The experimental results demonstrate that, TPA derivatives linked by the urea bond can effectively promote the aggregation of TPPS rather than those with the amide bond although the photo-generated radical cations are both produced. It is suggested that the urea-linked TPA derivatives are more favorable to stable radical cations and thus cause the formation of TPPS chiral J-aggregation. This work may open up an avenue for designing photo-modulated chiral supramolecular assemblies.

Radical-Driven Crystal-Amorphous-Crystal Transition of a Metal-Organic Framework

Self-assembly-based structural transition has been explored for various applications, including molecular machines, sensors, and drug delivery. In this study, we developed new redox-active metal-organic frameworks (MOFs) called DGIST-10 series that comprise π-acidic 1,4,5,8-naphthalenediimide (NDI)-based ligands and Ni2+ ions, aiming to boost ligand-self-assembly-driven structural transition and study the involved mechanism. Notably, during the synthesis of the MOFs, a single-crystal-amorphous-single-crystal structural transition occurred within the MOFs upon radical formation, which was ascribed to the fact that radicals prefer spin-pairing or through-space electron delocalization by π-orbital overlap. The radical-formation-induced structural transitions were further confirmed by the postsynthetic solvothermal treatment of isolated nonradical MOF crystals. Notably, the transient amorphous phase without morphological disintegration was clearly observed, contributing to the seminal structural change of the MOF. We believe that this unprecedented structural transition triggered by the ligand self-assembly magnifies the structural flexibility and diversity of MOFs, which is one of the pivotal aspects of MOFs.

Solution-based Supramolecular Hierarchical Assembly of Frenkel Excitonic Nanotubes Driven by Gold Nanoparticle Formation and Temperature

Translating nature's successful design principle of solution-based supramolecular self-assembling to broad applications─ranging from renewable energy and information technology to nanomedicine─requires a fundamental understanding of supramolecular hierarchical assembly. Though the forces behind self-assembly (e.g., hydrophobicity) are known, the specific mechanism by which monomers form the hierarchical assembly still remains an open question. A crucial step toward formulating a complete mechanism is understanding not only how the monomer's specific molecular structure but also how manifold environmental conditions impact the self-assembling process. Here, we elucidate the complex correlation between the environmental self-assembling conditions and the resulting structural properties by utilizing a well-characterized model system: well-defined supramolecular Frenkel excitonic nanotubes (NTs), self-assembled from cyanine dye molecules in aqueous solution, which further self-assemble into bundled nanotubes (b-NTs). The NTs and b-NTs inhabit distinct spectroscopic signatures, which allows the use of steady-state absorption spectroscopy to monitor the transition from NTs to b-NTs directly. Specifically, we investigate the impact of temperature (ranging from 23 °C, 55 °C, 70 °C, 85 °C, up to 100 °C) during in situ formation of gold nanoparticles to determine their role in the formation of b-NTs. The considered time regime for the self-assembling process ranges from 1 min to 8 days. With our work, we contribute to a basic understanding of how environmental conditions impact solution-based hierarchical supramolecular self-assembly in both the thermodynamic and the kinetic regime.

Aggregation-induced emission (AIE)-active metallacycles with near-infrared emission for photodynamic therapy

Multifunctional metallacycles with solid-state emission are highly important in cancer therapy. Here, an aggregation-induced emission (AIE)-active metallacycle of DTPABT-MC-R is developed with efficient emission in the NIR region in the solid state (PLQYs = 4.92%). DTPABT-MC-R-based nanoparticles also display excellent photo-stability, and impressive photosensitive characteristics (ROS efficiency = 10.74%), finally leading to applications in cellular imaging and photodynamic therapy (PDT).

Double Cation-π Directed Two-Dimensional Metallacycle-Based Hierarchical Self-Assemblies for Dual-Mode Catalysis

Hierarchical self-assembly of Pt(II) metallacycles for the construction of functional materials has received considerable research interest, owing to their potential to meet increasing complexity and functionality demands while being based on well-defined scaffolds. However, the fabrication of long-range-ordered Pt(II) metallacycle-based two-dimensional hierarchical self-assemblies (2D HSAs) remains a challenge, primarily because of the limitations of conventional orthogonal noncovalent interaction (NCI) motifs and the intrinsic characteristics of Pt(II) metallacycles, making the delicate self-assembly processes difficult to control. Herein, we prepare well-regulated Pt(II)-metallacycle-based 2D HSAs through a directed strategy involving double cation-π interactions derived from C3-symmetric hexagonal Pt(II) metallacycles and C2-symmetric sodium phenate monomers. Spatially confined arrays of planar Pt(II) metallacycles and the selective growth of self-assemblies at desired locations are achieved by employing strong cation-π driving forces with well-defined directionality as the second orthogonal NCI, realizing the bottom-up, three-stage construction of Pt(II)-metallacycle-based 2D HSAs. The resultant 2D HSAs are applied as dual-mode catalysis platforms, which are loaded with two different nanocatalysts, one promoting catalytic oxidation and the other promoting photocatalytic reduction.

Solvent-resolved self-assemblies of cholesteryl-cyanostilbene conjugates with photo- and thermo-responsiveness

It remains challenging to construct multifunctional chiral stimulus-responsive molecules and to modulate their morphology at the nanoscale. In this paper, we synthesized a novel chiral molecule with both photoactive and potentially bioactive properties and found that the morphological changes of its self-assembly were influenced by solvent polarity and light exposure. This work enabled the synthesized molecule to undergo Z-E isomerization efficiently under light irradiation by introducing highly oriented hydrogen bonds into the cyanostilbene part. The photoisomerization of the cyanostilbene part from Z- to E-type was further exploited, leading to morphological changes from nanohelices to vesicles with chiroptical evolution. The light-modulated supramolecular chirality and nanostructure provide a green and efficient method for the design of responsive chiral materials.

Photocatalysis in Water-Soluble Supramolecular Metal Organic Complex

As an emerging subset of organic complexes, metal complexes have garnered considerable attention owing to their outstanding structures, properties, and applications. In this content, metal-organic cages (MOCs) with defined shapes and sizes provide internal spaces to isolate water for guest molecules, which can be selectively captured, isolated, and released to achieve control over chemical reactions. Complex supramolecules are constructed by simulating the self-assembly behavior of the molecules or structures in nature. For this purpose, massive amounts of cavity-containing supramolecules, such as metal-organic cages (MOCs), have been extensively explored for a large variety of reactions with a high degree of reactivity and selectivity. Because sunlight and water are necessary for the process of photosynthesis, water-soluble metal-organic cages (WSMOCs) are ideal platforms for photo-responsive stimulation and photo-mediated transformation by simulating photosynthesis due to their defined sizes, shapes, and high modularization of metal centers and ligands. Therefore, the design and synthesis of WSMOCs with uncommon geometries embedded with functional building units is of immense importance for artificial photo-responsive stimulation and photo-mediated transformation. In this review, we introduce the general synthetic strategies of WSMOCs and their applications in this sparking field.

Solvato-Controlled Assembly and Structural Transformation of Emissive Poly-NHC-Based Organometallic Cages and Their Applications in Amino Acid Sensing and Fluorescence Imaging

Stimuli-induced structural transformation of supramolecular cages has drawn increasing attention because of their sensitive feature to external variations as model systems to simulate biological processes. However, combining structural transformation and useful functions has remained a difficult task. This study reports the solvato-controlled self-assembly of two unique topologies with different emission characteristics, a water-soluble Ag₈ L₄ cage (A) and an Ag₄ L₂ cage (B), produced from the same sulfonate-pendant tetraphenylethene (TPE) bridged tetrakis-(1,2,4-triazolium) ligand. Both cages show interesting solvent-responsive reversible structural transformation, and the change of fluorescence signals can efficiently track the process. Additionally, water-soluble cage A exhibits unique properties in thermochromism, thiol amino acid sensing, and subcellular imaging in aqueous media.

Synthesis of a Tetrahedral Metal-Organic Supramolecular Cage with Dendritic Carbazole Arms

In recent years, incredible endeavors have been devoted to the design and self-assembly of discrete metal-organic cages (MOCs) with expanding intricacy and functionality. The controlled synthesis of metal-organic supramolecular cages with large branched chains remains an interesting and challenging work in supramolecular chemistry. Herein, a tetrahedral metal-organic supramolecular cage (ZnII4L4) containing 12 dendritic carbazole arms is unprecedentedly constructed through coordination-driven subcomponent self-assembly and characterized in different ways. Interestingly, tetrahedral supramolecular Cage-1 exhibited the potential for aggregation-induced emission (AIE) performance and stimulus-responsive luminescence features, and it achieved color-tunable photoluminescence due to the introduction of dendritic carbazole arms. Crucially, owing to the great photophysical properties of Cage-1 in solution, Cage-1 was enabled to act as a fluorescent ink for the vapor-responsive recording and wiping of information.

Structural and anionic effects of microcrystalline Zn-CPs on 4-nitrophenol sensing performances

Coordination polymers (CPs: [ZnL₃]_n(X)_2n, L = trans-1,4-bis(imidazolyl)-2-butene; X⁻ = BF₄⁻, ClO₄⁻, NO₃⁻) allow for detection of the 4-nitrophenol (4-NP) oxidation process by enhanced electrochemical signals. Electrochemical measurement is a highly sensitive method providing much evidence of chemical reactions on an electrode surface. In the present study, we designed and synthesized, with reference to X-ray diffraction data and by spectroscopic analyses, new 3D coordination structures containing imidazolyl donors and zinc(ii). The presence of microcrystals [ZnL₃]_n(BF₄)_2n on the working electrode enhanced the redox signals. Therefore, we propose a simple catalytic process that can explain these results and clarify the influence of anions that constitute CP materials used to improve electrochemical detection applications. The CP materials were characterized by nuclear magnetic resonance (NMR), infrared spectroscopy (IR), thermogravimetric (TG) analyses, single crystal X-ray diffraction (SC-XRD), and electrochemical analyses.

To investigate structural and anionic effects of coordination polymers (CPs) on electrochemical sensors, Zn-CPs were synthesized and used for 4-nitrophenol oxidation sensors.

Effective Design Strategy of Small Bipolar Molecules through Fused Conjugation toward 2.5 V Based Redox Flow Batteries

Using bipolar redox-active molecules (BRMs) as active materials is a practical way to address electrolyte crossover and resultant unpredictable side reactions in redox-flow batteries. However, the development of BRMs is greatly hindered by difficulties in finding new molecules from limited redox-active moieties and in achieving high cell voltage to compete with existing flow battery chemistries. This study proposes a strategy for design of high-voltage BRMs using fused conjugation that regulates the redox potential of integrated redox-active moieties. As a demonstration, quaternary N and ketone redox moieties are used to construct a new BRM that shows a prominent voltage gap with good electrochemical stability. A symmetrical redox-flow cell based on this molecule exhibits a high voltage of 2.5 V and decent cycling stability. This study provides a general strategy for designing new BRMs that may enrich the cell chemistries of organic redox-flow batteries.

Tailored metal–organic tetrahedral nanocages with aggregation-induced emission for an anti-counterfeiting ink and stimulus-responsive luminescence

Tailored metal–organic tetrahedral nanocages with aggregation-induced emission for an anti-counterfeiting ink and stimulus-responsive luminescence.

Post-Synthetic Modification of Metal-Organic Frameworks Bearing Phenazine Radical Cations for aza-Diels-Alder Reactions

Metal-organic frameworks (MOFs) consisting of organic radicals are of great interest because they have exhibited unique and intriguing optical, electronic, magnetic, and chemo-catalytic properties, and thus have demonstrated great potential applications in optical, electronic, and magnetic devices, and as catalysts. However, the preparation of MOFs bearing stable organic radicals is very challenging because most organic radicals are highly reactive and difficult to incorporate into the framework of MOFs. Herein we reported a post-synthetic modification strategy to prepare a novel MOF containing phenazine radical cations, which was used as heterogeneous catalyst for aza-Diels-Alder reaction. The zinc-based metal-organic framework Zn₂ (PHZ)₂ (dabco) (N) was successfully synthesized from 5,10-di(4-benzoic acid)-5,10-dihydrophenazine (PHZ), triethylene diamine (dabco) with Zn(NO₃ )₂  ⋅ 6H₂ O by solvothermal method. The as-synthesized MOF N was partially oxidized by AgSbF₆ to form MOF R containing ∼10% phenazine radical cation species. The resultant MOF R was found to keep the original crystal type of N and very persistent under ambient conditions. Consequently, MOF R was successfully employed in radical cation-catalyzed aza-Diels-Alder reactions with various imine substrates at room temperature with high reaction conversion. Moreover, heterogeneous catalyst MOF R was reusable up to five times without much loss of catalytic activity, demonstrating its excellent stability and recyclability. Therefore, the post-synthetic modification developed in this work is expected to become a versatile strategy to prepare radical-based MOFs for the application of heterogeneous catalysts in organic synthesis.

One pot synthesis and self-assembly of methylene blue-backboned polymers

Studies of methylene blue-backboned polymers (MBPs) are hindered by the limited availability of polymerization methods. Herein, we developed an oxidative polymerization method to produce MBPs. The polymerization is performed in aqueous medium, and is organic solvent-free, heavy metal-free, time-efficient (on a timescale of minutes), and does not need pre-formed methylene blue chromophores. The effects of the alkyl chains of the MBPs on the photophysical properties and self-assembly behavior (e.g., vesicles and nanorings) are significant, which highlights the possibility of controlling the MBP properties via rationally tailoring the functionality of the MBP monomers prior to polymerization. Importantly, the self-assembly structures can be predicted using the dissipative particle dynamics (DPD) simulation method.

On-Site Supramolecular Adhesion to Wet and Soft Surfaces via Solvent Exchange

A series of poly(thioctic acid-catechol)s was prepared by supramolecular copolymerization of two low-molecular-weight monomers, thioctic acid (TA) and catechol (CA). The addition of a small amount of CA molecules significantly improved the adhesion ability of poly(TA) and transformed it into an applicable supramolecular polymer adhesive material. The robust adhesion of poly(TA-CA)s to soft surfaces was achieved by employing a hot-melt method. However, the supramolecular adhesion via the hot-melt method failed to perform in the presence of water. On-site supramolecular adhesion to wet and soft substrates was successfully realized through the solvent exchange behavior between water and the poly(TA-CA)s ethanol solution. Compared to the hot-melt method, the solvent exchange method displays various fascinating advantages and is suitable for adhesion conditions normally under the presence of water.

Recent advances and perspectives on supramolecular radical cages

Supramolecular radical chemistry has been emerging as a cutting-edge interdisciplinary field of traditional supramolecular chemistry and radical chemistry in recent years. The purpose of such a fundamental research field is to combine traditional supramolecular chemistry and radical chemistry together, and take the benefit of both to eventually create new molecules and materials. Recently, supramolecular radical cages have been becoming one of the most frontier and challenging research focuses in the field of supramolecular chemistry. In this Perspective, we give a brief introduction to organic radical chemistry, supramolecular chemistry, and the emerging supramolecular radical chemistry along with their history and application. Subsequently, we turn to the main part of this topic: supramolecular radical cages. The design and synthesis of supramolecular cages consisting of redox-active building blocks and radical centres are summarized. The host-guest interactions between supramolecular (radical) cages and organic radicals are also surveyed. Some interesting properties and applications of supramolecular radical cages such as their unique spin-spin interactions and intriguing confinement effects in radical-mediated/catalyzed reactions are comprehensively discussed and highlighted in the main text. The purpose of this Perspective is to help students and researchers understand the development of supramolecular radical cages, and potentially to stimulate innovation and creativity and infuse new energy into the fields of traditional supramolecular chemistry and radical chemistry as well as supramolecular radical chemistry.

Ligand-Triggered Platinum(II) Metallacycle with Mechanochromic and Vapochromic Responses

Supramolecular coordination complexes with solid-state stimuli-responsive characteristics are highly desirable but are rarely reported. Herein, we describe two coordination-driven self-assembled monoanthracene or dianthracene-based hexagonal metallacycles by subtle structure modification. Notably, the dianthracene-containing hexagon 1 exhibits tricolor mechanochromic and vapochromic characteristics, while the monoanthracene-containing hexagon 4 does not show obvious changes toward mechanical force. Further studies have indicated that changes in hexagon 1, especially the ulterior anthracene of hexagon 1 in the molecular stacking through intermolecular interactions toward external stimuli, are responsible for the above behavioral differences. Furthermore, the present work also demonstrates a novel light-harvesting strategy for achieving high-contrast mechanochromic fluorescence involving solid-state energy transfer from hexagon 1 to an organic carbazole derivant 6 without mechanofluorochromism or tetraphenylethylene derivant 7 exhibiting inconspicuous mechanofluorochromism.

Higher-order interfiber interactions in the self-assembly of benzene-1,3,5-tricarboxamide-based peptides in water

Mimicking the complexity of biological systems with synthetic supramolecular materials requires a deep understanding of the relationship between the structure of the molecule and its self-assembly pattern. Herein, we report a series of water-soluble benzene-1,3,5-tricarboxamide-based di- and tripeptide derivatives modified with small non-bulky terminal amine salt to induce self-assembly into twisted one-dimensional higher-order nanofibers. The morphology of nanofibers strongly depends on the nature, order, and quantity of amino acids in the short peptide fragments and vary from simple cylindrical to complex helical. From observations of several fiber-splitting events, we detected interfiber interactions that always occur in a pairwise manner, which implies that the C3 symmetry of benzene-1,3,5-tricarboxamide-based molecules in higher-order fibers becomes gradually distorted, thus facilitating hydrophobic contact interactions between fibrils. The proposed mechanism of self-assembly through hydrophobic contact allowed the successful design of a compound with pH-responsive morphology, and may find use in the future development of complex hierarchical architectures with controlled functionality.

Triple-Modulated Chiral Inversion of Co-Assembly System Based on Alanine Amphiphile and Cyanostilbene Derivative

The construction of chiroptical materials with controllable chirality is of special importance in biology and chemistry. Although tunable chirality can be realized in various systems, it remains a fundamental challenge to realize multimodulated chiral inversion. Herein, we report that chiral alanine derivative and fluorescent cyanostilbene derivative co-assemble to prepare supramolecular chiral systems, where twist nanofibers with totally inverted supramolecular chirality and circularly polarized luminescence are obtained through stoichiometric modulation. The supramolecular handedness can be inverted by means of altering the cooling rate and incorporating metal ions. The mechanism study reveals that the synergistic effect among hydrogen bonds, coordination interactions, and π-π stacking interactions contributes to the chirality inversion. This work establishes an effective strategy to precisely modulate supramolecular chirality in multiple ways, which shows great potential in developing smart chiroptical materials capable of achieving complex functionalities.

A Self-Assembled Homochiral Radical Cage with Paramagnetic Behaviors

Condensation of an inherently C₃ -symmetric polychlorotriphenylmethyl (PTM) radical trisaldehyde with tris(2-aminoethyl)amine (TREN) yields a [4+4] tetrahedral radical cage as a racemic pair of homochiral enantiomers in 75 % isolated yield. The structure was characterized by X-ray crystallography, confirming the homochirality of each cage framework. The homochirality results from intramolecular [CH⋅⋅⋅π] and hydrogen-bonding interactions within the cage framework. The four PTM radicals in a cage undergo weak through-space coupling. Magnetic measurements demonstrated that each cage bears 3.58 spins.

Self-assembled metallasupramolecular cages towards light harvesting systems for oxidative cyclization

Designing artificial light harvesting systems with the ability to utilize the output energy for fruitful application in aqueous medium is an intriguing topic for the development of clean and sustainable energy. We report here facile synthesis of three prismatic molecular cages as imminent supramolecular optoelectronic materials via two-component coordination-driven self-assembly of a new tetra-imidazole donor (L) in combination with 180°/120° di-platinum(ii) acceptors. Self-assembly of 180° trans-Pt(ii) acceptors A1 and A2 with L leads to the formation of cages Pt4 L 2(1a) and Pt8 L 2(2a) respectively, while 120°-Pt(ii) acceptor A3 with L gives the Pt8 L 2(3a) metallacage. PF6 - analogues (1b, 2b and 3b) of the metallacages possess a high molar extinction coefficient and large Stokes shift. 1b-3b are weakly emissive in dilute solution but showed aggregation induced emission (AIE) in a water/MeCN mixture as well as in the solid state. AIE active 2b and 3b in aqueous (90% water/MeCN mixture) medium act as donors for fabricating artificial light harvesting systems via Förster resonance energy transfer (FRET) with organic dye rhodamine-B (RhB) with high energy efficiency and good antenna effect. The metallacages 2b and 3b represent an interesting platform to fabricate new generation supramolecular aqueous light harvesting systems with high antenna effect. Finally, the harvested energy of the LHSs (2b + RhB) and (3b + RhB) was utilized successfully for efficient visible light induced photo-oxidative cross coupling cyclization of N,N-dimethylaniline (4) with a series of N-alkyl/aryl maleimides (5) in aqueous acetonitrile with dramatic enhancement in yields compared to the reactions with RhB or cages alone.

A multi-responsive supramolecular heparin-based biohybrid metallogel constructed by controlled self-assembly based on metal–ligand, host–guest and electrostatic interactions

A new family of supramolecular heparin-based biohybrid metallogels with multiple stimuli-responsive behaviours was constructed through the controlled self-assembly based on three orthogonal interactions within a single system.

A supramolecular dual-donor artificial light-harvesting system with efficient visible light-harvesting capacity

A supramolecular dual-donor artificial light-harvesting system with efficient visible light-harvesting capacity was constructed through the hierarchical self-assembly approach.

Diversiform Nanostructures Constructed from Tetraphenylethene and Pyrene-Based Acid/Base Controllable Molecular Switching Amphiphilic [2]Rotaxanes with Tunable Aggregation-Induced Static Excimers

Dual-emissive tetraphenylethene (TPE) and pyrene-containing amphiphilic molecules are of great interest because they can be integrated to form stimuli responsive materials with various biological applications. Herein, we report the study of mechanically interlocked molecules (MIMs) with aggregation-induced static excimer emission (AISEE) property through a series of TPE and pyrene-based amphiphilic [2]rotaxanes, where t-butylcalix[4]arene with hydrophobic nature was used as the macrocycle. Evidently, by adorning TPE and pyrene units in [2]rotaxanes P1, P2, P1-b, and P2-b, they display remarkable emission bands in 70% of water fraction (f_w) in tetrahydrofuran (THF)/water mixture, which could be attributed to the restricted intramolecular rotation of phenyl groups, whereas prominent blue-shifted excimer emission of pyrene started to appear as f_w reached 80% for P1 and 90% for P1-b, P2, and P2-b, which was ascribed to the favorable π-π stacking and hydrophobic interactions of the pyrene rings that enabled their static excimer formation. The well-defined distinct amphiphilic nanostructures of [2]rotaxanes including hollowspheres, mesoporous nanostructures, spheres, and network linkages can be driven smoothly depending on the molecular structures and their aggregated states in THF/water mixture. These fascinating diversiform nanostructures were mainly controlled by the skillful manner of reversible molecular shuttling of t-butylcalix[4]arene macrocycle and also the interplay of multinoncovalent interactions. To further understand the aggregation capabilities of [2]rotaxanes, the human lung fibroblasts (MRC-5) living cell incubated with either P1, P2, P1-b, or P2-b was studied and monitored by confocal laser scanning microscopy. The AISEE property was achieved at an astonishing level by integrating TPE and pyrene to MIM-based reversible molecular switching [2]rotaxanes; furthermore, distinct nanostructures, especially hollowspheres and mesoporous nanostructures, were observed, which are rarely reported in the literature but are highly desirable for future applications.

Recent developments in the construction and applications of platinum-based metallacycles and metallacages via coordination

Coordination-driven suprastructures have attracted much interest due to their unique properties. Among these structures, platinum-based architectures have been broadly studied due to their facile preparation. The resultant two- or three-dimensional (2D or 3D) systems have many advantages over their precursors, such as improved emission tuning, sensitivity as sensors, and capture and release of guests, and they have been applied in biomedical diagnosis as well as in catalysis. Herein, we review the recent results related to platinum-based coordination-driven self-assembly (CDSA), and the text is organized to emphasizes both the synthesis of new metallacycles and metallacages and their various applications.

Constructing Cross-Linked Nanofibrous Scaffold via Dual-Enzyme-Instructed Hierarchical Assembly

To explore the potential of step-by-step assembly in the fabrication of biological materials, we designed and synthesized two peptide-based molecules for enzyme-instructed hierarchical assembly. Upon the treatment of alkaline phosphatase, one molecule undergoes enzyme-instructed self-assembly forming uniformed nanofibers. The other one that can self-assemble into vesicles undergoes enzyme-induced transformation of self-assembly converting vesicles into irregular aggregates upon the treatment of carboxylesterase. Coadministration of two enzymes to a mixture of these two molecules in a stage-by-stage fashion leads to a physically knotted nanofibrous scaffold that is applicable as a nanostructured matrix for cell culture.

Supramolecular self-healing materials from non-covalent cross-linking host-guest interactions

The introduction of non-covalent bonds is effective for achieving self-healing properties because they can be controlled reversibly. One approach to introduce these bonds into supramolecular materials is use of host-guest interactions. This feature article summarizes the development of supramolecular materials constructed by non-covalent cross-linking through several approaches, such as host-guest interactions between host polymers and guest polymers, 1 : 2-type host-guest interactions, and host-guest interactions from the polymerization of host-guest inclusion complexes. Host-guest interactions show self-healing functions while also enabling stimuli-responsiveness (redox, pH, and temperature). The self-healing function of supramolecular materials is achieved by stress dispersion arising from host-guest interactions when stress is applied. Reversible bonds based on host-guest interactions have tremendous potential to expand the variety of functional materials.

Metal–organic polyhedra crosslinked supramolecular polymeric elastomers

Supramolecular polymeric elastomers crosslinked by metal–organic polyhedra were developed, featuring not only tunable mechanical properties but also dynamic actuation behaviors.