Applications of the ninhydrin reaction for analysis of amino acids, peptides, and proteins to agricultural and biomedical sciences

LC enantioseparation of active pharmaceutical ingredients using rationally synthesized CDRs and chiral molecules with high molar absorptivity

The synthesis of optically active compounds requires determination of ee, er, and enantiomeric purity. The aim of the present paper is to review the synthesis of several chiral derivatizing reagents (CDRs) in a rational manner, which were successful for the separation and isolation of enantiomers of a variety of active pharmaceutical ingredients and other important and useful racemates. Besides, the application of (i) certain enantiomerically pure amines, either directly or by incorporating each of them as chiral auxiliary in difluorodinitrobenzene or cyanuric chloride moieties to construct the CDR, (ii) (S)-ketoprofen and (S)-levofloxacin as chiral platforms, and (iii) a few isothiocyanates, have been suitably included. Attention is drawn to the use of water micellar mobile phase as the "green" RP-HPLC method and the use of simple achiral derivatization with ninhydrin, particularly. Synthesis of CDRs and their application for enantioseparation of racemates and detagging of certain chromophoric reagent components for obtaining native enantiomers are other interesting features included herein. The methods can be easily used to determine and control enantiomeric purity with advantages over a variety of commercial chiral phases. This comprehensive review not only highlights innovative methodologies for enantioseparation but also underscores their practical applications in controlling and ensuring the enantiomeric purity of pharmaceutical compounds.

Recent trends in the separation and analysis of chitooligomers

Chitosan is a widely used linear biopolymer composed mainly of glucosamine and to a lesser extent of N-acetylglucosamine units. Many biological activities of chitosan are attributed to its shorter oligomeric chains, which consist of chitosan prepared either by enzyme activity (lysozyme, bacterial chitinase) or chemically by acid-catalyzed hydrolysis (e.g. in the stomach). However, these processes always result in a mixture of shorter chitooligosaccharides with varying degrees of acetylation whereas for relevant results of biological studies it is necessary to work with a precisely defined material. In this review, we provide an overview and comparison of analytical methods leading to the determination of the degree of polymerization (DP), the degree of acetylation (DA), the fraction of acetylation (FA) and the acetylation patterns (PA) of chitooligosaccharide chains and of the current state of knowledge on chitooligosaccharide separation. This review aims to present the most promising routes to well-defined low molecular weight chitosan with low dispersity.

Enhancing linezolid activity in the treatment of oral biofilms using novel chitosan microneedles with iontophoretic control

This study aimed to prepare and assess active microneedle (MN) patches based on a novel biomaterial and their effective coupled (physical and electrical) transdermal delivery of a model drug (Linezoid). Modified MN patches (e.g. fabricated from Linezoid, boronated chitosan, polyvinyl alcohol and D-sorbitol) were engineered using a vacuum micromoulding method. Physicochemical, FTIR (Fourier transform infrared), in-silico, structural and thermal analysis of prepared formulations were conducted to ascertain MN quality, composition and integrity. In-vitro mechanical tests, membrane toxicity, drug release, antibiofilm, ex-vivo mucoadhesion, insertion and in-vivo antibiofilm studies were performed to further validate viability of the coupled system. Optimized MN patch formulation (CSHP3 - comprising of 3 % w/v boronated chitosan, 3.5 % w/v PVA and 10 % w/w D-sorbitol) exhibited sharp-tipped, equi-distant and uniform-surfaced micron-scaled projections with conforming physicochemical features. FTIR analysis confirmed modification (i.e., boronation) of chitosan and compatibility as well as interaction between CSHP3 constituents. In-silico analysis indicated non-covalent interactions between all formulation constituents. Moreover, boronated chitosan-mucin glycoprotein complex showed a stronger bonding (∼1.86 times higher CScore) as compared to linezolid-mucin counterpart. Thermal analysis indicated amorphous nature of CSHP3. A ∼ 1.42 times higher tensile strength was displayed by CSHP3 as compared to control (i.e., pure chitosan, polyvinyl alcohol and D-sorbitol-based MN patch). Membrane toxicity study indicated non-toxic and physiological compatible nature of CSHP3. Within 90 min, 91.99 ± 2.3 % linezolid was released from CSHP3. During release study on agarose gel, CSHP3-iontophoresis treatment resulted in a ∼ 1.78 and ∼ 1.20 times higher methylene blue-covered area and optical density, respectively, within 60 min as compared to CSHP3 treatment alone. Staphylococcus aureus biofilms treated with CSHP3 exhibited 65 ± 4.2 % reduction in their mass. CSHP3 MN patches remained adhered to the rabbit oral mucosa for 6 ± 0.15 h. Mucosa treated with CSHP3 and CSHP3-iontophoresis combination showed a generation of pathways in the epithelium layers without any damage to the underlying lamina propria. Eradication of Staphylococcus aureus from oral mucosal wounds and complete tissue regeneration was recorded following 7-day treatment using CSHP3-iontophoresis coupled approach.

Fast and reliable method for analysis of derivatized plasma amino acids by liquid chromatography-single quadrupole-mass spectrometry

The pool of free, genetically encoded AA in plasma plays an essential role not only as substrate for every protein synthesized in the body but also as signaling molecules that regulate a wide range of physiological processes. Here we present a method for the analysis of 19 of the 20 encoded AA (except Cys) in dairy cow plasma. Isolated plasma or standards for the 19 AA were gravimetrically mixed with an internal standard mix consisting of 13C isotopes of each AA. Plasma proteins were precipitated on acetonitrile and supernatants transferred to glass vials. For precolumn derivatization, plasma supernatants were buffered with sodium borate (pH 9.5-10), and AA were derivatized with 9-fluorenylmethoxycarbonyl (Fmoc) chloride. Analytes were isolated by solid-phase extraction using a strong-anionic ion exchange column and dry eluates were reconstituted in mobile phase consisting of 70% water solution of ammonium formate and 30% acetonitrile. Amino acid derivatives were separated by reverse-phase liquid chromatography over 17.5 min with a C18 column in which acetonitrile increased to 80% over the first 11 min of the method, before returning to initial levels. Electrospray ionization on negative mode was used for most AA, except Arg and Pro, for which positive mode yielded superior results. Single or double (only Lys) derivatives were measured by single quadrupole-mass spectrometry. We hypothesized that precolumn Fmoc derivatization would yield optimal resolution for quantitative analysis of the 19 targeted AA and their respective 13C internal standards, with limits of quantitation beyond physiological ranges. All 19 AA were detected with minimal background noise. An 11-point standard curve was developed for each AA. Limits of quantitation were beyond concentrations observed in plasma samples of lactating dairy cows, except for Gly where upper curve points had to be removed to maintain linearity, limiting quantitation to the upper range of physiological concentration. After removing the 4 highest concentrations from the Gly standard curve, coefficients of determination were greater than 0.999 for all of the AA. Recovery of spiked AA from plasma samples ranged from 89.9% for Phe to 100.3% for Trp. Instrument repeatability averaged 0.91 and ranged from 0.33 for Val to 2.29 for Arg. Meanwhile, sample preparation method repeatability averaged 2.02 and ranged from 1.14 for Tyr to 3.34 for Arg. Although robust methods have been developed, they depend on either availability of sophisticated instruments, mostly limited to core facilities (i.e., tandem MS methods), long and expensive chromatography without specific internal standards for each AA (i.e., HPLC-ultraviolet and HPLC-fluorescence detector), or unstable derivatization (GC-MS). Here we describe a method with high throughput, stable derivatization, high precision and recovery, and potentially more affordable than most existing methods. This method could help dairy nutritionists to consider plasma AA information for diet formulation strategies, potentially reducing feeding costs and N emissions.

Modified throughput ninhydrin method for the qualitative assessment of dietary protein absorption in pig plasma

Protein maldigestion and malabsorption lead to malnutrition and are a feature of exocrine pancreatic insufficiency (EPI). Although it is the current standard, measurement of nitrogen in stool to assess protease activity is indirect. Up to 80% of hydrolysed proteins appear in blood in the form of peptides, so we developed a method to measure peptide-derived amino acids in plasma as a relevant measure of proteolysis, verified its accuracy, precision, and linearity, and validated it in a porcine model. We modified a ninhydrin method. Large proteins were eliminated from plasma with 10 kDa-cut-off centrifugal filters. Free and total amino acids were measured in permeate before and after its hydrolysis. Peptide-derived amino acids were quantified by subtracting free amino acids from total amino acids. We verified the method in vitro and by comparing results in healthy and EPI pigs. The accuracy of the analysis was close to 100%, with excellent precision (mean relative standard deviation for low, medium, and high amino acid levels = 0.88%) and with stringent linearity (r2  = 0.986, %RE = 5.23). The high-throughput ninhydrin method detected levels of peptide-derived amino acids in vivo with maximal changes seen approximately 2 hours postprandially in young pigs. The AUC and Cmax were significantly higher in healthy compared to EPI pigs (P = .0026 and P = .0037, respectively). The high-throughput ninhydrin method is a sensitive, reliable, and practical method for the estimation of dietary peptide-derived amino acids. This assay endpoint could serve as a direct biomarker of protein digestion and absorption.

Physiological and biochemical responses in a cadmium accumulator of traditional Chinese medicine Ligusticum sinense cv. Chuanxiong under cadmium condition

Ligusticum sinense cv. Chuanxiong (L. Chuanxiong), one of the widely used traditional Chinese medicines (TCM), is currently facing the problem of excessive cadmium (Cd) content. This problem has significantly affected the quality and safety of L. Chuanxiong and become a vital factor restricting its clinical application and international trade development. Currently, to solve the problem of excessive Cd, it is essential to research the response mechanisms of L. Chuanxiong to Cd stress. However, there are few reports on its physiological and biochemical responses under Cd stress. In this study, we conducted the hydroponic experiment under 25 μM Cd stress, based on the Cd content of the genuine producing areas soil. The results showed that 25 μM Cd stress not only had no significant inhibitory effect on the growth of L. Chuanxiong seedlings but also significantly increased the chlorophyll a content (11.79%) and root activity (51.82%) compared with that of the control, which might be a hormesis effect. Further results showed that the absorption and assimilation of NH4+ increased in seedlings under 25 μM Cd stress, which was associated with high photosynthetic pigments. Here, we initially hypothesized and confirmed that Cd exceedance in the root system of L. Chuanxiong was due to the thickening of the root cell wall, changes in the content of the cell wall components, and chelation of Cd by GSH. There was an increase in cell wall thickness (57.64 %) and a significant increase in cellulose (25.48%) content of roots under 25 μM Cd stress. In addition, L. Chuanxiong reduced oxidative stress caused by 25 μM Cd stress mainly through the GSH/GSSG cycle. Among them, GSH-Px (48.26%) and GR (42.64%) activities were significantly increased, thereby maintaining a high GSH/GSSG ratio. This study preliminarily reveals the response of L. Chuanxiong to Cd stress and the mechanism of Cd enrichment. It provides a theoretical basis for solving the problem of Cd excessive in L. Chuanxiong.

Collagen-polyurethane-dextran hydrogels enhance wound healing by inhibiting inflammation and promoting collagen fibrillogenesis

Diabetic foot ulcers are a serious complication of uncontrolled diabetes, emphasizing the need to develop wound healing strategies that are not only effective but also biocompatible, biodegradable, and safe. We aimed to create biomatrices composed of semi-interpenetrated polymer networks of collagen, polyurethane, and dextran, to enhance the wound healing process. The hydrogels were extensively characterized by various analytical techniques, including analysis of their structure, crystallinity, thermal properties, gelation process, reticulation, degradation, cell proliferation, and healing properties, among others. Semi-interpenetrated hydrogels containing dextran at levels of 10%, 20%, and 30% exhibited porous interconnections between collagen fibers and entrapped dextran granules, with a remarkable crosslinking index of up to 94% promoted by hydrogen bonds. These hydrogels showed significant improvements in mechanical properties, swelling, and resistance to proteolytic and hydrolytic degradation. After 24 h, there was a significant increase in the viability of several cell types, including RAW 264.7 cells, human peripheral blood mononuclear cells, and dermal fibroblasts. In addition, these hydrogels demonstrated an increased release of interleukin-10 and transforming growth factor-beta1 while inhibiting the release of monocyte chemotactic protein-1 and tumor necrosis factor-alpha after 72 h. Furthermore, these hydrogels accelerated the wound healing process in diabetic rats after topical application. Notably, the biomaterial with 20% dextran (D20) facilitated wound closure in only 21 days. These results highlight the potential of the D20 hydrogel, which exhibits physicochemical and biological properties that enhance wound healing by inhibiting inflammation and fibrillogenesis while remaining safe for application to the skin.

Green fractionation and hydrolysis of fish meal to improve their techno-functional properties

A green strategy employing water as solvent has been adopted to obtain protein hydrolysates from fish meal (FM), its water-soluble fraction (WSP), and its non-water-soluble fraction (NSP). The techno-functional properties of the hydrolysates have been investigated and compared to hydrolysates obtained with Alcalase®. In general, SWH hydrolysates presented higher content of free amino acids and higher degree of hydrolysis, which reflected on the molecular size distribution. However, Alcalase® hydrolysates presented better solubility (from 74 ± 4% for NSP at pH = 2 up to 99 ± 1% for WSP at pH = 4-7). According to fluorescence experiments, FM and NSP hydrolysates showed the highest surface hydrophobicity, which has been related to better emulsifying properties and higher emulsion stability. The emulsions stabilized with 2%wt. of SWH-treated NSP showed the smallest particle sizes, with D[4,3] = 155 nm at day 0, and good stability, with D[4,3] = 220 nm at day 7, proving that water fractionation followed by SWH treatment is a good method to improve the techno-functional properties of the hydrolysates.

Cold maceration extraction of wild fruit Terminalia bellirica (Gaertn.) Roxb.: exploring its bioactives for biomedical applications

Terminalia bellirica (T. bellirica) (Gaertn.) Roxb. is a well-known traditional medicinal plants that show promising treatment because of fewer side effects in humans. In the present study, the total phenol, flavonoid, condensed and hydrolyzable tannins extracted and analyzed from cold macerated (CM) T. bellirica (Gaertn.) Roxb. fruit (TBF) and leaves (TBL) extract with the identification of bioactive compounds using GC-MS/MS technique. The highest amount of bioactive content was found in ethanolic extract than toluene. Current experimental data of TBF extract shows the maximum and significant biological activity like free radical scavenging activity against DPPH and FRAP assays with IC50 values of 51.07 ± 0.52 μg/ml and 63.14 ± 0.59 μg/ml respectively. However, IC50 cytotoxicity values of TBF extract on MCF-7 cells for 24 hrs was found to be 6.34 ± 0.72 μg/ml. Minimum inhibitory concentration (MIC) for infectious pathogens Escherichia coli and Bacillus cereus was >12.5 μg/ml and >100 μg/ml respectively, however, anti-inflammatory activity was demonstrated as an IC50 value of 509.1 ± 1.72 μg/ml. Cold macerated fruit extract revealed threatening inhibitory potential against the α-amylase and α-glucosidase enzymes, with IC50 of 50.98 ± 0.23 μg/ml and 46.70 ± 1.38 μg/ml respectively. Finally, the outcome of this study showed that T. bellirica (Gaertn.) Roxb. fruit extract could be an effective source of bioactives with efficient biomedical properties.

Smart proteins as a new paradigm for meeting dietary protein sufficiency of India: a critical review on the safety and sustainability of different protein sources

India, a global leader in agriculture, faces sustainability challenges in feeding its population. Although primarily a vegetarian population, the consumption of animal derived proteins has tremendously increased in recent years. Excessive dependency on animal proteins is not environmentally sustainable, necessitating the identification of alternative smart proteins. Smart proteins are environmentally benign and mimic the properties of animal proteins (dairy, egg and meat) and are derived from plant proteins, microbial fermentation, insects and cell culture meat (CCM) processes. This review critically evaluates the technological, safety, and sustainability challenges involved in production of smart proteins and their consumer acceptance from Indian context. Under current circumstances, plant-based proteins are most favorable; however, limited land availability and impending climate change makes them unsustainable in the long run. CCM is unaffordable with high input costs limiting its commercialization in near future. Microbial-derived proteins could be the most sustainable option for future owing to higher productivity and ability to grow on low-cost substrates. A circular economy approach integrating agri-horti waste valorization and C1 substrate synthesis with microbial biomass production offer economic viability. Considering the use of novel additives and processing techniques, evaluation of safety, allergenicity, and bioavailability of smart protein products is necessary before large-scale adoption.

Enhancing salt stress tolerance in wheat (Triticum aestivum) seedlings: insights from trehalose and mannitol

Salinity stress, an ever-present challenge in agriculture and environmental sciences, poses a formidable hurdle for plant growth and productivity in saline-prone regions worldwide. Therefore, this study aimed to explore the effectiveness of trehalose and mannitol induce salt resistance in wheat seedlings. Wheat grains of the commercial variety Sakha 94 were divided into three groups : a group that was pre-soaked in 10 mM trehalose, another group was soaked in 10 mM mannitol, and the last was soaked in distilled water for 1 hour, then the pre soaked grains cultivated in sandy soil, each treatment was divided into two groups, one of which was irrigated with 150 mM NaCl and the other was irrigated with tap water. The results showed that phenols content in wheat seedlings increased and flavonoids reduced due to salt stress. Trehalose and mannitol cause slight increase in total phenols content while total flavonoids were elevated highy in salt-stressed seedlings. Furthermore, Trehalose or mannitol reduced salt-induced lipid peroxidation. Salt stress increases antioxidant enzyme activities of guaiacol peroxidase (G-POX), ascorbate peroxidase (APX), and catalase (CAT) in wheat seedlings, while polyphenol oxidase (PPO) unchanged. Trehalose and mannitol treatments caused an increase in APX, and CAT activities, whereas G-POX not altered but PPO activity were decreased under salt stress conditions. Molecular docking confirmed the interaction of Trehalose or mannitol with peroxidase and ascorbic peroxidase enzymes. Phenyl alanine ammonia layase (PAL) activity was increased in salt-stressed seedlings. We can conclude that pre-soaking of wheat grains in 10 mM trehalose or mannitol improves salinity stress tolerance by enhancing antioxidant defense enzyme and/or phenol biosynthesis, with docking identifying interactions with G-POX, CAT, APX, and PPO.

Diaminated Cellulose Beads as a Sustainable Support for Industrially Relevant Lipases

Environmentally persistent polystyrene or polyacrylic beads are used as supports in enzyme large-scale bioprocesses, including conversion glucose isomerization for high-fructose corn syrup production, hydrolysis of lactose, and synthesis of active pharmaceutical ingredients. In this paper, we report the development of a novel sustainable and scalable method to produce diaminated cellulose beads (DAB) as highly efficient alternative supports for industrially relevant lipases. Regenerated cellulose beads were grafted with diaminated aliphatic hydrocarbons via periodate oxidation and reductive amination. The oxidation step indicated that aldehyde content can be easily tuned through the reaction time and concentration of reactants. Reductive amination of dialdehyde cellulose was more efficient as the length of the diaminated hydrocarbon compound increased. Morphological analysis of DAB showed that cellulose chemical grafting enabled the preservation of the bead shape and internal structure upon freeze-drying. Enzymatic degradability studies demonstrated that chemical functionalization did not undermine enzyme cellulose hydrolysis. The addition of aminated moieties on cellulose dramatically increased absorption efficiency for all industrially relevant lipases used, reaching 100% for Thermomyces lanuginosus lipase (TLL). Storage and recyclability experiments demonstrated that enzymes were retained and recyclable for at least nine cycles, although the activity gradually declined after each cycle. Medium chain triacylglycerol hydrolysis in a SpinChem reactor using TLL immobilized on 1,6 DAB exhibited higher activity compared to acrylic beads (588 vs 459 U/g) suggesting that biodegradable cellulose-based materials could be a valid and attractive alternative to plastics carriers.

Potential of Subcritical Water Hydrolysis to Valorize Low-Valued Ray-Finned Fish (Labeobarbus nedgia): Effects of Hydrolysis Temperature and Pressurization Agent

Subcritical water (SCW) hydrolysis was applied to valorize the low-valued ray-finned fish (Labeobarbus nedgia) into valuable protein hydrolysates, employing N2 and CO2 as pressurization agents at varying temperatures (140, 160, 180, and 200 °C). The degree of hydrolysis (DH) and total free amino acid content increased with temperature for both pressurizing agents. The highest DH (54.5 ± 0.4%) and total free amino acid content (210 ± 1 mg/gprot) were observed at 200 °C when CO2 gas was used as the pressurizing agent. Predominantly, glycine and alanine were released for both pressurizing agents. The antioxidant activity, evaluated through three different assays, increased with temperature and was found to be the highest at 200 °C. This study illustrated the advantages of the intensified SCW technology by using CO2 as a pressurization agent in valorizing low-valued ray-finned fish (Labeobarbus nedgia), as animal residue rich in proteins, for the production of valuable protein hydrolysates with a high fraction of valuable free amino acids, which could offer potential applications as a functional ingredient in the food industry.

Multiprotease improves amino acid release in vitro, energy, and nutrient utilization in broilers fed diets varying in crude protein levels

Low crude protein (CP) diets can reduce nitrogen (N) excretion and costs by increasing N utilization efficiency. Exogenous proteases may further improve protein digestibility in low CP diets. This study first evaluated in vitro the efficacy of a multiprotease on amino acid (AA) release from feedstuffs and broiler feed. Later, a broiler study evaluated the effect of feeding corn-soybean meal diets containing 3 CP levels (17, 19, and 21% CP) with supplementation on top of 0 or 2,400 U/kg multiprotease on chicken growth performance, total tract CP, and ileal AA digestibilities, and energy utilization. Ross 708 male chickens were placed in 42 cages and assigned to 6 treatments resulting from a 3 × 2 factorial arrangement. Three isocaloric basal diets were formulated to reduce CP, but all diets maintained digestible Lys:CP in 5.47% and the same ideal protein profile. Data were analyzed in a completely randomized design. On average, the multiprotease increased (P < 0.05) in vitro free AA release by 27.81% in most feedstuffs evaluated compared to the control. For broiler feed, 1,200 U/g multiprotease addition improved (P < 0.001) in vitro free AA release by 18.90%. This multiprotease showed interaction effects (P < 0.05) on chicken FCR, energy, and CP digestibility. As expected, BW at 24 d, BW gain, and FCR (8-24 d) worsened (P < 0.001) as dietary CP reduced from 21 to 17%, and multiprotease addition did not improve (P > 0.05) these parameters. BW gain decreased by 12.9% when N intake was reduced from 49.32 to 38.49 g/bird. Multiprotease supplementation improved (P < 0.01) AMEn by 71 kcal/kg, CP digestibility from 59.45 to 63.51%, ileal AA digestibility, and DM digestibility from 67.08 to 73.49%, but only in the 21% CP diet. No differences in ileal AA digestibility due to CP level (P > 0.05) were detected, except for Cys digestibility (P < 0.01). In conclusion, low CP diets reduced growth performance and improved N utilization but negatively affected energy utilization efficiency. Exogenous multiprotease supplementation improved AME, AMEn, protein, ileal AA, and DM digestibility in the 21% CP diet without significantly affecting growth performance.

Investigating sorghum protein solubility and in vitro digestibility during seed germination

In this work, we examined the impact of sorghum gain germination on kafirins solubility and digestibility. Two genotypes differing in their proteins and tannins contents were germinated under controlled conditions up to radicle emergence. Biochemical, physicochemical, and in vitro digestibility tests were applied on the germinated grains. Microscopic examination of grains endosperm revealed that germination resulted in pitted starch granules and protein matrix slackening. Apart cystine and the amount of free thiol groups which increased significantly, the overall amino acids composition remained rather unchanged, just as the kafirins solubility and size distribution. In contrast germination was demonstrated to improved significantly the in vitro protein digestibility, even after cooking and especially for the genotype poor in tannin. Without inducing major physicochemical changes, germination enhanced kafirins susceptibility to gastrointestinal proteases. Germination may be a way to improve the nutritional value of sorghum.

Sulfonyl γ-AApeptide tools for modulating biology

The modulation of biology utilizing foldamers has flourished over the last few decades thanks to their overwhelming promise in their applications in molecular design, catalysis, supramolecular, and rational design. However, the application of peptidomimetics is still restricted due to the limited availability of molecular frameworks and folding propensities. To broaden the scope of foldameric peptidomimetics we proposed the development of sulfonyl-γ-AApeptides-the oligomers of sulfonyl-γ-N-acylated-N-aminoethyl (AA) amino acids, a unique unnatural scaffold that possesses promising potential to modulate protein-protein interactions. In this chapter, the overall process of design, synthesis, and function of sulfonyl-γ-AApeptides is briefly reviewed for the use of unnatural foldamers to modulate PPIs.

Sourdough starter culture microbiomes influence physical and chemical properties of wheat bread

Sourdough fermentation is an ancient leavening method that uses wild yeasts to produce carbon dioxide, contributing to bread rise, and bacteria which produce organic acids. Sourdough starter cultures are known to be diverse in terms of the microorganisms they comprise and while specific genera and species of microorganisms have been identified from starters and associated with specific attributes, overarching relationships between sourdough starter culture microbiomes and bread quality are not well understood. The objective of this study was to characterize differences in the physical and chemical properties of breads produced with sourdough starter cultures with unique microbiomes. Sourdough starter cultures (n = 20) of known microbial populations were used to produce wheat-based dough and bread, which were analyzed for chemical and physical properties then compared to their microbial populations in order to identify relationships between microbial profiles and dough/bread qualities. All samples were also compared to bread produced only with Saccharomyces cerevisiae (baker's yeast). Significant differences among pH, titratable acidity, loaf volume, crumb firmness, crust color, free amino acids, and organic acids were observed when comparing sourdough breads to the yeast-only control (p ≤ 0.05). Furthermore, bacterial diversity of sourdough starter cultures was correlated with lactic acid and free amino acid in the dough and loaf volume and crumb firmness of baked breads. No significant correlations were found between fungal diversity and measured outcomes. These data demonstrate the importance of considering sourdough starter microbiomes as an ingredient in baked goods and they contribute to quality and safety outcomes in bread production. PRACTICAL APPLICATION: Sourdough starter cultures have diverse and dynamic populations of bacteria and yeasts, which contribute to the production of bread products. These populations can influence the physical and chemical properties of sourdough fermentation and final breads. Understanding of the relationship between sourdough starter microbiomes and bread quality parameters can lead to targeted development of sourdough bread products with specific physical and chemical properties.

Enhancing the Thermal Stability of Zein Particle-Stabilized Aeratable Emulsions Through Genipin-Protein Cross-Linking and Its Possible Mechanism of Action

Protein particle-stabilized emulsions often lack thermal stability, impacting their industrial use. This study investigated the effects of genipin (GP)-zein cross-linked particles with varying GP-to-protein weight ratios (0/0.02/0.1:1) on emulsion thermal stability. Enhanced stability was observed at the GP level of 0.1. Heat treatment increased the covalent cross-linking in raw particles and emulsions. Isolated particles from heated emulsions grew in size (micrometer scale) with higher GP levels, unlike heated raw particles (nanoscale). GP-protein cross-linking reduced the droplet-droplet and particle-emulsifier interactions in the heated emulsion. Spectroscopic analysis and electrophoresis revealed that GP-zein cross-linking increased protein structural stability and inhibited nondisulfide and non-GP cross-linking reactions in heated emulsions. The GP-zein bridges between particles at the oil-water interface create strong connections in the particle layer (shell), referred to as "particle-shell locking", enhancing the thermal stability of emulsion significantly. This insight aids the future design of protein-particle-based emulsions, preserving properties like aeratability during thermal processing.

Effect of multi arm-PEG-NHS (polyethylene glycol n-hydroxysuccinimide) branching on cell adhesion to modified decellularized bovine and porcine pericardium

Implanting physical barrier materials to separate wounds from their surroundings is a promising strategy for preventing postoperative adhesions. Herein, we develop a material that switches from an anti-adhesive surface to an adhesive surface, preventing adhesion in the early stage of transplantation and then promoting recellularization. In this study, 2-arm, 4-arm, and 8-arm poly(ethylene glycol) succinimidyl glutarate (2-, 4-, 8-arm PEG-NHS) were used to modify the surface of decellularized porcine and bovine pericardium. The number of free amines on the surface of each material significantly decreased following modification regardless of the reaction molar ratio of NH2 and NHS, the number of PEG molecule branches, and the animal species of the decellularized tissue. The structure and mechanical properties of the pericardium were maintained after modification with PEG molecules. The time taken for the PEG molecules to detach through hydrolysis of the ester bonds differed between the samples, which resulted in different cell repulsion periods. By adjusting the reaction molar ratio, the number of PEG molecule branches, and the animal species of the decellularized pericardium, the duration of cell repulsion can be controlled and is expected to provide an anti-adhesion material for a variety of surgical procedures.

Quantitative spectrofluorimetric method for determination of octreotide acetate synthetic peptide derivative in pure and its Sandostatin ampules forms

A unique spectrofluorimetric protocol has been conceived for octreotide (a synthetic peptide drug) quantitation in both its authentic form and its application to dosage form. The protocol has been established simply upon condensation of octreotide by ninhydrin / phenyl acetaldehyde reagent in buffered media (pH 6.2). An intense fluorescence product has been formed and quantified at 463 nm (390 nm for excitation). After optimization for various experimental conditions, a wide linear interval (0.2-4.0 µg/ml) has been used to construct the calibration curve with a determination coefficient (r2) of 0.9994, a slope ± SD of 81.147 ± 0.7985, and a highly sensitive detection and quantitation limits nearly equal to 0.066 and 0.2 µg/ml, respectively. A proposed protocol has been checked in accordance with ICH validation guidelines, which indicate good accuracy and high precision of the proposed method. Furthermore, this protocol could be perfectly applied for the quantitative estimation of octreotide in its ampoules with a high degree of accuracy and precision. As a result, a developed protocol is ideally appropriate for fast and simple octreotide quantitative estimation in quality control laboratories.

An antibacterial nanoclay- and chitosan-based quad composite with controlled drug release for infected skin wound healing

Microbial infections of surgical sites and other wounds represent a major impediment for patients. Multifunctional low-cost dressings promoting tissue reparation while preventing infections are of great interest to medical professionals. Here, clay-based laponite nanodiscs (LAP) were loaded with the antibacterial drug kanamycin (KANA) before being embedded into a poly(lactic-co-glycolic acid) (PLGA) membrane and coated with the biopolymer chitosan (CS). Results indicated that these biocompatible materials combined the excellent capacity of LAP for controlled drug release with the mechanical robustness of PLGA and the antibacterial properties of CS as well as its hydrophilicity to form a composite highly suitable as an infection-preventing wound dressing. In vitro, PLGA/LAP/KANA/CS released drugs in a sustainable manner over 30 d, completely inhibited the growth of infectious bacteria, prompted the adhesion fibroblasts, and accelerated their proliferation 1.3 times. In vivo, the composite enabled the fast healing of infected full-thickness skin wounds with a 96.19 % contraction after 14 d. During the healing process, PLGA/LAP/KANA/CS stimulated re-epithelization, reduced inflammation, and promoted both angiogenesis and the formation of dense collagen fibers with an excellent final collagen volume ratio of 89.27 %. Thus, multifunctional PLGA/LAP/KANA/CS made of low-cost components demonstrated its potential for the treatment of infected skin wounds.

Morphological Evaluation of Supramolecular Soft Materials Obtained through Co-Assembly Processes

Low-molecular-weight gelators (LMWGs) are compounds with an intrinsic tendency to self-assemble forming various supramolecular architectures via non-covalent interactions. Considering that the development of supramolecular assemblies through the synergy of molecules is not entirely understood at the molecular level, this study introduced a Fmoc-short peptide and four Fmoc-amino acids as building blocks for the self-assembly/co-assembly process. Hence, we investigated the formation of supramolecular gels starting from the molecular aggregation following two triggering approaches: solvent/co-solvent method and pH switch. The complex morphological analysis (POM, AFM, and STEM) offered an insight into the spontaneous formation of well-ordered nanoaggregates. Briefly, POM and AFM images demonstrated that self-assembled gels present various morphologies like dendrimer, spherulite, and vesicle, whereas all co-assembled supramolecular systems exhibit fibrillar morphologies as a result of the interaction between co-partners of each system. STEM study has confirmed that the molecules interact and join together, finally forming a fibrous network, an aspect seen in both self-assembled and co-assembled gels. XRD allowed the determination of the molecular arrangement. The study emphasized that the Fmoc motif protected the amino groups and facilitated gelation through additional π-π interactions.

Impact of Different Light Conditions on the Nitrogen, Protein, Colour, Total Phenolic Content and Amino Acid Profiles of Cultured Palmaria palmata

The impact of different light conditions during culture on the nitrogen, protein, colour, total phenolic content (TPC) and amino acid profile of Palmaria palmata biomass was investigated. P. palmata was cultured using different light regimes, i.e., white (1 and 2), red, blue and green over 12 days. A significant decrease (p < 0.05) in total nitrogen (TN), non-protein nitrogen (NPN) and protein nitrogen (PN) was observed on day 6 while an increase was observed on day 12 in P. palmata samples cultured under blue light. The protein content (nitrogen conversion factor of 4.7) of the initial sample on day 0 was 15.0% (w/w) dw whereas a maximum protein content of 16.7% (w/w) was obtained during exposure to blue light following 12 days culture, corresponding to an 11.2% increase in protein content. Electrophoretic along with amino acid profile and score analyses showed light-related changes in protein composition. The lighting regime used during culture also influenced the colour parameters (lightness L*, redness a*, yellowness b* and colour difference ΔE) of milled algal biomass along with the TPC. Judicious selection of lighting regime during culture may allow the targeted production of sustainable high-quality proteins from P. palmata.

Developments in on-line, post separation sample manipulation in the last 22 years: Pharmaceutical and biomedical applications

On-line post separation sample manipulation is a powerful approach increasing the sensitivity and selectivity in chemical analysis. Post separation sample manipulation includes the treatment of the analytes after their separation through a suitable separation technique, mainly liquid chromatography and capillary electrophoresis. Typically, post separation approaches include either the addition of a reagent/solvent to derivatize the analyte/enhance the sensitivity, pH change, or the conversion of the analyte through a photochemical/electrochemical system (reagent-free systems). This review focuses on the developed methods using post-column manipulation of sample with pharmaceuticals and biomedical applications, covering the period from 2000 to midle-2023. Chemistries combined with fluorescence, UV-vis and mass spectrometric detection are discussed employing both liquid chromatography and electrophoretic techniques for separation. Noteworthy instrumental modifications are also discussed.

Microwave-Assisted Silanization of Magnetite Nanoparticles Pre-Synthesized by a 3D Microfluidic Platform

Magnetite nanoparticles (Fe3O4 NPs) are among the most investigated nanomaterials, being recognized for their biocompatibility, versatility, and strong magnetic properties. Given that their applicability depends on their dimensions, crystal morphology, and surface chemistry, Fe3O4 NPs must be synthesized in a controlled, simple, and reproducible manner. Since conventional methods often lack tight control over reaction parameters and produce materials with unreliable characteristics, increased scientific interest has been directed to microfluidic techniques. In this context, the present paper describes the development of an innovative 3D microfluidic platform suitable for synthesizing uniform Fe3O4 NPs with fine-tuned properties. On-chip co-precipitation was performed, followed by microwave-assisted silanization. The obtained nanoparticles were characterized from the compositional and microstructural perspectives by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Moreover, supplementary physicochemical investigations, such as Fourier Transform Infrared Spectroscopy (FT-IR), Kaiser Test, Ultraviolet-Visible (UV-Vis) Spectrophotometry, Dynamic Light Scattering (DLS), and Thermogravimetry and Differential Scanning Calorimetry (TG-DSC) analyses, demonstrated the successful surface modification. Considering the positive results, the presented synthesis and functionalization method represents a fast, reliable, and effective alternative for producing tailored magnetic nanoparticles.

The cold atmospheric pressure plasma-generated species superoxide, singlet oxygen and atomic oxygen activate the molecular chaperone Hsp33

Cold atmospheric pressure plasmas are used for surface decontamination or disinfection, e.g. in clinical settings. Protein aggregation has been shown to significantly contribute to the antibacterial mechanisms of plasma. To investigate the potential role of the redox-activated zinc-binding chaperone Hsp33 in preventing protein aggregation and thus mediating plasma resistance, we compared the plasma sensitivity of wild-type E. coli to that of an hslO deletion mutant lacking Hsp33 as well as an over-producing strain. Over-production of Hsp33 increased plasma survival rates above wild-type levels. Hsp33 was previously shown to be activated by plasma in vitro. For the PlasmaDerm source applied in dermatology, reversible activation of Hsp33 was confirmed. Thiol oxidation and Hsp33 unfolding, both crucial for Hsp33 activation, occurred during plasma treatment. After prolonged plasma exposure, however, unspecific protein oxidation was detected, the ability of Hsp33 to bind zinc ions was decreased without direct modifications of the zinc-binding motif, and the protein was inactivated. To identify chemical species of potential relevance for plasma-induced Hsp33 activation, reactive oxygen species were tested for their ability to activate Hsp33 in vitro. Superoxide, singlet oxygen and potentially atomic oxygen activate Hsp33, while no evidence was found for activation by ozone, peroxynitrite or hydroxyl radicals.

O-alg-THAM/gel hydrogels functionalized with engineered microspheres based on mesenchymal stem cell secretion recruit endogenous stem cells for cartilage repair

Lacking self-repair abilities, injuries to articular cartilage can lead to cartilage degeneration and ultimately result in osteoarthritis. Tissue engineering based on functional bioactive scaffolds are emerging as promising approaches for articular cartilage regeneration and repair. Although the use of cell-laden scaffolds prior to implantation can regenerate and repair cartilage lesions to some extent, these approaches are still restricted by limited cell sources, excessive costs, risks of disease transmission and complex manufacturing practices. Acellular approaches through the recruitment of endogenous cells offer great promise for in situ articular cartilage regeneration. In this study, we propose an endogenous stem cell recruitment strategy for cartilage repair. Based on an injectable, adhesive and self-healable o-alg-THAM/gel hydrogel system as scaffolds and a biophysio-enhanced bioactive microspheres engineered based on hBMSCs secretion during chondrogenic differentiation as bioactive supplement, the as proposed functional material effectively and specifically recruit endogenous stem cells for cartilage repair, providing new insights into in situ articular cartilage regeneration.

Aldehyde-functionalized cellulose as reactive sorbents for the capture and retention of polyamine odor molecules associated with chronic wounds

Aldehyde-functionalized cellulose (AFC) was prepared by oxidizing cellulose with sodium metaperiodate. The reaction was characterized by Schiff's test, FT-IR, and UV-vis study. AFC was evaluated as a reactive sorbent for controlling polyamine-based odor from chronic wounds, and its performance was compared with charcoal, one of the most widely utilized odor-control sorbents through physisorption. Cadaverine was used as the model odor molecule. A liquid chromatography/mass spectrometry (LC/MS) method was established to quantify the compound. AFC was found to rapidly react with cadaverine through the Schiff-base reaction, which was confirmed by FT-IR, visual observation, CHN elemental analysis, and the ninhydrin test. The sorption and desorption behaviors of cadaverine onto AFC were quantified. With clinic-relevant cadaverine concentrations, AFC demonstrated much better sorption performance than charcoal. At even higher cadaverine concentrations charcoal showed higher sorption capacity, probably due to its high surface area. On the other hand, in desorption studies, AFC retained much more of the sorbed cadaverine than charcoal. When AFC and charcoal were combined, the pair demonstrated excellent sorption and desorption behaviors. The XTT (2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) assay confirmed that AFC has very good in vitro biocompatibility. These results suggest that AFC-based reactive sorption can be a new strategy to control odors associated with chronic wounds for improved healthcare.

Meldrum's Acid Furfural Conjugate MAFC: A New Entry as Chromogenic Sensor for Specific Amine Identification

Bioactive amines are highly relevant for clinical and industrial application to ensure the metabolic status of a biological process. Apart from this, generally, amine identification is a key step in various bioorganic processes ranging from protein chemistry to biomaterial fabrication. However, many amines have a negative impact on the environment and the excess intake of amines can have tremendous adverse health effects. Thus, easy, fast, sensitive, and reliable sensing methods for amine identification are strongly searched for. In the past few years, Meldrum's acid furfural conjugate (MAFC) has been extensively explored as a starting material for the synthesis of photoswitchable donor-acceptor Stenhouse adducts (DASA). DASA formation hereby results from the rapid reaction of MAFC with primary and secondary amines, which has so far been demonstrated through numerous publications for different applications. The linear form of the MAFC-based DASA exhibits intense pink coloration due to its linear conjugated triene-2-ol conformation, which has inspired researchers to use this easy synthesizable molecule as an optical sensor for primary, secondary, and biogenic amines. Due to its new entry into amine identification, a collection of the literature exclusively on MAFC is demanded. In this mini review, we intend to present the state-of-the-art of MAFC as an optical molecular sensor in hopes to motivate researchers to find even more applications of MAFC-based sensors and methods that pave the way to their usage in medicinal applications.

Biomimetic Electrospun Self-Assembling Peptide Scaffolds for Neural Stem Cell Transplantation in Neural Tissue Engineering

Spinal cord regeneration using stem cell transplantation is a promising strategy for regenerative therapy. Stem cells transplanted onto scaffolds that can mimic natural extracellular matrix (ECM) have the potential to significantly improve outcomes. In this study, we strived to develop a cell carrier by culturing neural stem cells (NSCs) onto electrospun 2D and 3D constructs made up of specific crosslinked functionalized self-assembling peptides (SAPs) featuring enhanced biomimetic and biomechanical properties. Morphology, architecture, and secondary structures of electrospun scaffolds in the solid-state and electrospinning solution were studied step by step. Morphological studies showed the benefit of mixed peptides and surfactants as additives to form thinner, uniform, and defect-free fibers. It has been observed that β-sheet conformation as evidence of self-assembling has been predominant throughout the process except for the electrospinning solution. In vitro NSCs seeded on electrospun SAP scaffolds in 2D and 3D conditions displayed desirable proliferation, viability, and differentiation in comparison to the gold standard. In vivo biocompatibility assay confirmed the permissibility of implanted fibrous channels by foreign body reaction. The results of this study demonstrated that fibrous 2D/3D electrospun SAP scaffolds, when shaped as micro-channels, can be suitable to support NSC transplantation for regeneration following spinal cord injury.

Measuring tryptophan dynamics using fast scan cyclic voltammetry at carbon fiber microelectrodes with improved sensitivity and selectivity

Despite the fact that tryptophan (Trp) is an essential amino acid that humans typically obtain through diet, there are several interesting tryptophan dynamics at play in the body. Quantifying and understanding these dynamics are crucial in studies of depression, autism spectrum disorder, and other disorders that involve neurotransmitters directly synthesized from tryptophan. Here we detail the optimization of waveform parameters in fast scan cyclic voltammetry at carbon fiber microelectrodes to yield four-fold higher sensitivity and six-fold higher selectivity compared to previously reported methods. We demonstrate the utility of our method in measuring (1) exogenous Trp dynamics from administration of Trp to PC-12 cells with and without overexpression of tryptophan hydroxylase-2 and (2) endogenous Trp dynamics in pinealocyte cultures with and without stimulation via norepinephrine. We observed interesting differences in Trp dynamics in both model systems, which demonstrate that our method is indeed sensitive to Trp dynamics in different applications.

Quantitation of L-cystine in Food Supplements and Additives Using 1H qNMR: Method Development and Application

Cystine-enriched food supplements are increasingly popular due to their beneficial health effects. However, the lack of industry standards and market regulations resulted in quality issues with cystine food products, including cases of food adulteration and fraud. This study established a reliable and practical method for determining cystine in food supplements and additives using quantitative NMR (qNMR). With the optimized testing solvent, acquisition time, and relaxation delay, the method exhibited higher sensitivity, precision, and reproducibility than the conventional titrimetric method. Additionally, it was more straightforward and more economical than HPLC and LC-MS. Furthermore, the current qNMR method was applied to investigate different food supplements and additives regarding cystine quantity. As a result, four of eight food supplement samples were found to be inaccurately labeled or even with fake labeling, with the relative actual amount of cystine ranging from 0.3% to 107.2%. In comparison, all three food additive samples exhibited satisfactory quality (the relative actual amount of cystine: 97.0-99.9%). Notably, there was no obvious correlation between the quantifiable properties (price and labeled cystine amount) of the tested food supplement samples and their relative actual amount of cystine. The newly developed qNMR-based approach and the subsequent findings might help standardization and regulation of the cystine supplement market.

Effect of nitrogen application on enhancing high-temperature stress tolerance of tomato plants during the flowering and fruiting stage

This study was conducted to investigate the effects of nitrogen application on growth, photosynthetic performance, nitrogen metabolism activities, and fruit quality of tomato plants under high-temperature (HT) stress. Three levels of daily minimum/daily maximum temperature were adopted during the flowering and fruiting stage, namely control (CK; 18°C/28°C), sub-high temperature (SHT; 25°C/35°C), and high-temperature (HT; 30°C/40°C) stress. The levels of nitrogen (urea, 46% N) were set as 0 (N₁), 125 (N₂), 187.5 (N₃), 250 (N₄), and 312.5 (N₅) kg hm², respectively, and the duration lasted for 5 days (short-term). HT stress inhibited the growth, yield, and fruit quality of tomato plants. Interestingly, short-term SHT stress improved growth and yield via higher photosynthetic efficiency and nitrogen metabolism whereas fruit quality was reduced. Appropriate nitrogen application can enhance the high-temperature stress tolerance of tomato plants. The maximum net photosynthetic rate (P _Nmax), stomatal conductance (g _s), stomatal limit value (L_S), water-use efficiency (WUE), nitrate reductase (NR), glutamine synthetase (GS), soluble protein, and free amino acids were the highest in N₃, N₃, and N₂, respectively, for CK, SHT, and HT stress, whereas carbon dioxide concentration (C _i), was the lowest. In addition, maximum SPAD value, plant morphology, yield, Vitamin C, soluble sugar, lycopene, and soluble solids occurred at N₃-N₄, N₃-N₄, and N₂-N₃, respectively, for CK, SHT, and HT stress. Based on the principal component analysis and comprehensive evaluation, we found that the optimum nitrogen application for tomato growth, yield, and fruit quality was 230.23 kg hm² (N₃-N₄), 230.02 kg hm² (N₃-N₄), and 115.32 kg hm² (N₂), respectively, at CK, SHT, and HT stress. Results revealed that the high yield and good fruit quality of tomato plants at high temperatures can be maintained by higher photosynthesis, nitrogen efficiency, and nutrients with moderate nitrogen.

Cysteine synthase: multiple structures of a key enzyme in cysteine synthesis and a potential drug target for Chagas disease and leishmaniasis

Chagas disease is a neglected tropical disease (NTD) caused by Trypanosoma cruzi, whilst leishmaniasis, which is caused by over 20 species of Leishmania, represents a group of NTDs endemic to most countries in the tropical and subtropical belt of the planet. These diseases remain a significant health problem both in endemic countries and globally. These parasites and other trypanosomatids, including T. theileri, a bovine pathogen, rely on cysteine biosynthesis for the production of trypanothione, which is essential for parasite survival in hosts. The de novo pathway of cysteine biosynthesis requires the conversion of O-acetyl-L-serine into L-cysteine, which is catalysed by cysteine synthase (CS). These enzymes present potential for drug development against T. cruzi, Leishmania spp. and T. theileri. To enable these possibilities, biochemical and crystallographic studies of CS from T. cruzi (TcCS), L. infantum (LiCS) and T. theileri (TthCS) were conducted. Crystal structures of the three enzymes were determined at resolutions of 1.80 Å for TcCS, 1.75 Å for LiCS and 2.75 Å for TthCS. These three homodimeric structures show the same overall fold and demonstrate that the active-site geometry is conserved, supporting a common reaction mechanism. Detailed structural analysis revealed reaction intermediates of the de novo pathway ranging from an apo structure of LiCS and holo structures of both TcCS and TthCS to the substrate-bound structure of TcCS. These structures will allow exploration of the active site for the design of novel inhibitors. Additionally, unexpected binding sites discovered at the dimer interface represent new potential for the development of protein-protein inhibitors.

Comparative study on the effect of inhibitory methods on the color and gelation properties of alkali induced heat-set konjac gel from Amorphophallus bulbifer

As a newly superior konjac variety, the Amorphophallus bulbifer (A. bulbifer) was easily browning during the alkali-induced process. In this study, five different inhibitory methods, such as citric-acid heat pretreatment (CAT), mixed with citric acid (CA), mixed with ascorbic acid (AA), mixed with L-cysteine (CYS), and mixed with potato starch (PS, containing TiO2), were separately used to inhibit the browning of alkali-induced heat-set A. bulbifer gel (ABG). The color and gelation properties were then investigated and compared. Results showed that the inhibitory methods had significant influences on the appearance, color, physicochemical properties, rheological properties, and microstructures of ABG. Among them, the CAT method not only significantly inhibited the browning of ABG (ΔE value dropped from 25.74 to 14.68) but also improved the water-holding capacity, moisture distribution, and thermal stability without damaging the textural properties of ABG. Moreover, SEM revealed that both CAT and adding PS methods could exhibit the more dense gel network structures of ABG than other methods. It was reasonable to conclude that ABG-CAT offered a superior method to prevent browning compared to the other methods based on the texture, microstructure, color, appearance, and thermal stability of the product.

Production of small peptides and low molecular weight amino acids by subcritical water hydrolysis from fish meal: effect of pressurization agent and comparison with enzymatic hydrolysis

The hydrolysis of the water-soluble protein (WSP) fraction from tuna fish meal was evaluated by subcritical water (subW) by using N₂ and CO₂ as different pressurization agents in the temperature range from 140 to 180 °C. For both gases, the amino group release increased by increasing working temperature while the Lowry response decreased due to production of smaller-size peptides and free amino acids. The free amino acid content was higher with CO₂ than with N₂. At 180 °C, 344 ± 5 and 275 ± 3 mg of free amino acids per g of WSP were released, respectively; although, in both systems the smallest molecular weight amino acids, glycine and alanine, were preferentially released. The free amino acids content obtained by enzymatic hydrolysis with commercial proteases Alcalase and Novozym was much lower with the highest hydrolysis yield determined for histidine. These results have been supported by size exclusion chromatography analysis.

Sensitivity Intensified Ninhydrin-Based Chromogenic System by Ethanol-Ethyl Acetate: Application to Relative Quantitation of GABA

Gamma-aminobutyric acid (GABA) is a functional metabolite in various organisms. Herein, a sensitivity intensified ninhydrin-based chromogenic system (SINICS), achieved by ethanol and ethyl acetate, is described for the reliable relative quantitation of GABA. A 2.9 mL SINICS kit comprises 1% ninhydrin, 40% ethanol, 25% ethyl acetate, and 35 μL 0.2 M sodium acetate buffer (pH 5.0). In practice, following the addition of a 0.1 mL sample to the kit, the chromogenic reaction is completed by heating at 70 °C for 30 min. The kit increased the color development sensitivity of L-glutamic acid and GABA, with the detection limits being reduced from 20 mM and 200 mM to 5 mM and 20 mM, respectively. The chromophore was stable for at least 2 h at room temperature, which was sufficient for a routine colorimetric analysis. The absorbance at 570 nm with the deduction of background directly represents the content of amino acid. For a proof-of-concept, the SINICS was adopted to optimize the GABA fermentation process of Levilactobacillus brevis CD0817. The results demonstrated that SINICS is an attractive alternative to the available ninhydrin-based colorimetric methods.

The deficiency of poly-β-1,6-N-acetyl-glucosamine deacetylase trigger A. baumannii to convert to biofilm-independent colistin-tolerant cells

Acinetobacter baumannii is a nosocomial pathogen that can be resistant to antibiotics by rapidly modulating its anti-drug mechanisms. The multidrug-resistant A. baumannii has been considered one of the most threatening pathogens to our society. Biofilm formation and persistent cells within the biofilm matrix are recognized as intractable problems, especially in hospital-acquired infections. Poly-β-1,6-N-acetyl-glucosamine (PNAG) is one of the important building blocks in A. baumannii's biofilm. Here, we discover a protein phosphoryl-regulation on PNAG deacetylase, AbPgaB1, in which residue Ser411 was phosphorylated. The phosphoryl-regulation on AbPgaB1 modulates the product turnover rate in which deacetylated PNAG is produced and reflected in biofilm production. We further uncovered the PgaB deficient A. baumannii strain shows the lowest level of biofilm production but has a high minimal inhibition concentration to antibiotic colistin and tetracycline. Based on bactericidal post-antibiotic effects and time-dependent killing assays with antibacterial drugs, we claim that the PgaB-deficient A. baumannii converts to colistin-tolerant cells. This study utilizes a biofilm-independent colistin-tolerant model of A. baumannii to further investigate its characteristics and mechanisms to better understand clinical outcomes.

Evaluation of the composition of konjac glucomannan on the color changes during the deacetylation reaction

As a newly superior konjac variety, the Amorphophallus bulbifer (A. bulbifer) has several unique advantages of high reproductive coefficient, short growth cycle, high disease resistance, high konjac glucomannan (KGM) content and climate adaption to hot or humid conditions. However, the gel formed by KGM from the A. bulbifer flour is easily browning during the alkali-induced process and the mechanism underlying them is still unclear. In order to explore the browning mechanisms, the changes of composition and color parameters of KGM were investigated during deacetylation in this research. The L*, h*, total phenols, total flavonoids, reducing sugars, and amino acids decreased along with the increase of deacetylation degree of KGM while a*, ΔЕ, and browning index increased. The results indicated that the oxidation or polymerization of polyphenols and flavones in alkaline circumstances, and the carbonyl ammonia reaction between reducing sugars and amino acids may be the main reasons for color changes of KGM flour during deacetylation. Hence, this study was expected to provide the theoretical basis for the inhibition of KGM gel browning and further broaden the application range of KGM in food and other industries.

Tinospora sinensis (Lour.) Merr alkaloid rich extract induces colon cancer cell death via ROS mediated, mTOR dependent apoptosis pathway: "an in-vitro study"

BACKGROUND

Colorectal cancer (CRC) is the second most mortality rate causing disease after lung cancer. Though there is a significant improvement in the treatment schedule offered to CRC. However, there is no notable decrease in terms of cases as well as death rate. Hence, there is an urgent need to discover novel cancer therapeutics to treat CRC. Since ancient times, the use of phytochemicals has drawn huge attention as chemo-preventive and chemotherapeutic agents. Earlier studies on Tinospora sinensis (TS) revealed the cytotoxic effect on human colorectal carcinoma (HCT-116) cells, yet the mechanism is to be uncovered. Therefore, the present study was designed to study the cell death mechanism of TS in HCT-116 cells.

METHOD

Different extracts such as n-hexane, ethyl acetate, and ethanol extracts from the root part of TS were prepared using a cold maceration process. The extracts were screened against cancer cell lines by methyl thiazoldiphenyltetrazolium bromide (MTT) assay. From the result, the most active extract was subjected to gas chromatography-mass spectrometry (GC-MS) and Fourier-Transform infrared spectroscopy (FTIR) analyses to identify the major constituents. Finally, the mechanism of cytotoxicity to cancer cells for the most active extract was evaluated using various experiments such as cell cycle analysis, Annexin-V assay, and Western blot.

RESULTS

The results from the MTT assay indicated that the n-hexane extract of TS inhibits the growth of HCT-116 cells more effectively than other cancer cells like Henrietta Lacks cervical cancer cells (Hela), and Michigan cancer foundation-breast cancer (MCF-7). The GC-MS and FT-IR analyses revealed the presence of alkaloids in the n-hexane extract and were responsible for the apoptosis activity in HCT-cells via reactive oxygen species (ROS) generation, and phosphoinositide 3-kinase (PI3K)/ protein Kinase B (Akt)/ mammalian target of rapamycin (mTOR) down-regulation.

CONCLUSION

This study concludes that this finding is unique of its kind, and for the first time. The anticancer effect of TS root is specific to colon cancer cells (HCT-116). This distinctive finding helps the researchers to investigate further, and to identify a novel source for anti-colon cancer drug candidates in near future.

Influence of twin-headed gemini micellar system on the study of methionine amino acid with ninhydrin in buffer solution

The influence of double-headed gemini was examined in the present study by studying the amino acid methionine mixed with ninhydrin in CH₃COOH-CH₃COONa buffer solvent. The absorbance was monitored at fixed time intervals with UV-vis spectroscopy. An impact typical of surfactants was observed on the ninhydrin-methionine reaction and explained by a pseudo-phase model of micelles. The effect of different temperatures (343 to 363 K) was also determined. Based on data showing the impact of temperature on k_ψ , several relevant thermodynamic quantities, ΔH ^#, ΔS ^#, and E _a, were calculated using linear least-squares regression. In addition, the influence of the other reaction ingredients on the reaction, that is, pH and the concentration of ninhydrin and methionine, was studied. The CMC (critical micelle concentration) of pure geminis and the surfactant system with methionine and ninhydrin was evaluated at two temperatures, i.e. at 303 K and 353 K by conductivity measurements. The CMC values of pure gemini surfactants evaluated in the existing case at 303 K are concordant with the results stated before. Moreover, other parameters, including rates and binding constants, were calculated.

Ultrasound targeted microbubble destruction-triggered nitric oxide release via nanoscale ultrasound contrast agent for sensitizing chemoimmunotherapy

Immunotherapy had demonstrated inspiring effects in tumor treatment, but only a minority of people could benefit owing to the hypoxic and immune-suppressed tumor microenvironment (TME). Therefore, there was an urgent need for a strategy that could relieve hypoxia and increase infiltration of tumor lymphocytes simultaneously. In this study, a novel acidity-responsive nanoscale ultrasound contrast agent (L-Arg@PTX nanodroplets) was constructed to co-deliver paclitaxel (PTX) and L-arginine (L-Arg) using the homogenization/emulsification method. The L-Arg@PTX nanodroplets with uniform size of about 300 nm and high drug loading efficiency displayed good ultrasound diagnostic imaging capability, improved tumor aggregation and achieved ultrasound-triggered drug release, which could prevent the premature leakage of drugs and thus improve biosafety. More critically, L-Arg@PTX nanodroplets in combination with ultrasound targeted microbubble destruction (UTMD) could increase cellular reactive oxygen species (ROS), which exerted an oxidizing effect that converted L-Arg into nitric oxide (NO), thus alleviating hypoxia, sensitizing chemotherapy and increasing the CD8 + cytotoxic T lymphocytes (CTLs) infiltration. Combined with the chemotherapeutic drug PTX-induced immunogenic cell death (ICD), this promising strategy could enhance immunotherapy synergistically and realize powerful tumor treatment effect. Taken together, L-Arg@PTX nanodroplets was a very hopeful vehicle that integrated drug delivery, diagnostic imaging, and chemoimmunotherapy.

Silk Nanofibril-Palygorskite Composite Membranes for Efficient Removal of Anionic Dyes

To develop membrane materials with good performance for water purification that are green and low cost, this work reports an organic-inorganic composite membrane composed of silk nanofibrils (SNFs) and palygorskite (PGS). To improve the stability of the the composite membrane, genipin was used as a crosslinking agent to induce the conformational transition of SNF chains from random coils to β-sheets, reducing the swelling and hydrolysis of the membrane. The separation performance can be adjusted by tailoring the component ratio of the nanomaterial. The results showed that these membranes can effectively remove anionic dyes from water, and they exhibit excellent water permeability. The SNF-based membrane had strong mechanical and separation properties, and the PGS could tune the structure of composite membranes to enhance their permeability, so this green composite membrane has good prospects in water treatment and purification applications.

Role of Sodium Nitroprusside on Potential Mitigation of Salt Stress in Centaury (Centaurium erythraea Rafn) Shoots Grown In Vitro

Soil salinity is one of the most common abiotic stressors that affects plant growth and development. The aim of this work was to investigate the influence of sodium nitroprusside (SNP), a donor of nitric oxide (NO), on the physiological response of common centaury (Centaurium erythraea) shoots grown under stress conditions caused by sodium chloride (NaCl) in vitro. Centaury shoots were first grown on nutrient medium containing different SNP concentrations (50, 100 and 250 μM) during the pretreatment phase. After three weeks, the shoots were transferred to nutrient media supplemented with NaCl (150 mM) and/or SNP (50, 100 or 250 μM) for one week. The results showed that salinity decreased photosynthetic pigments, total phenolic content and DPPH (1,1-diphenyl-2-picrylhydrazyl radical) concentration. The activities of antioxidant enzymes, namely superoxide dismutase (SOD), catalase (CAT) and peroxidase (POX), were also reduced under salt stress. However, MDA concentration was decreased, while H₂O₂ and proline content did not drastically change under the stress conditions caused by NaCl. Exogenous application of SNP altered the biochemical parameters of centaury shoots grown under salt stress. In this case, increased photosynthetic pigment content, total phenolics and proline content were noted, with reduced MDA, but not H₂O₂, concentration was observed. In addition, the exogenous application of SNP increased the degree of DPPH reduction as well as SOD, CAT and POX activities.

A High-Throughput Colorimetric Microplate Assay for Determination of Plasma Arginase Activity

Arginase, an enzyme involved in the urea cycle, is gaining attention as a critical player in numerous chronic pathologies. Additionally, increased activity of this enzyme has been shown to correlate with poor prognosis in a range of cancers. Colorimetric assays that measure the conversion of arginine to ornithine have long been used to determine the activity of arginase. However, this analysis is hindered by a lack of standardization across protocols. Here, we describe in detail a novel revision of the Chinard's colorimetric assay used to determine arginase activity. Dilution series of patient plasma are plotted to form a logistic function, from which activity can be interpolated by comparison to an ornithine standard curve. Inclusion of patient dilution series rather than a single point increases the robustness of the assay. This high-throughput microplate assay analyzes 10 samples per plate to produce highly reproducible results.