Application of gas chromatography-mass spectrometry/combustion/isotope ratio mass spectrometry (GC-MS/C/IRMS) to detect the abuse of 17β-estradiol in cattle

An ultrasensitive dual-mode stagey for 17β-estradiol assay: Photoelectrochemical and colorimetric biosensor based on a WSe2/TiO2-modified electrode coupled with nucleic acid amplification

BACKGROUND

The abuse of 17β-estradiol(E2) has aroused wide concern in environmental and biomedical fields, which severely affects the endocrine function of human and animals. Therefore, an ultrasensitive and accurate assay of E2 is critically important. Traditional chromatography or immunoassay techniques exhibited good sensitivity and selectivity, but expensive instruments and antibodies may pose cost and stability issues, as well as difficulties in meeting on-site detection requirements. Ultrasensitive, reliable, and on-site detection of E2 at trace level remains a challenge. Hence, developing a simple, ultrasensitive assay to simultaneously achieve accurate detection and rapid visual analysis of E2 is extremely crucial.

RESULTS

We developed a versatile dual-mode photoelectrochemical (PEC) and colorimetric biosensor based on isothermal nucleic acid amplification strategy for the ultrasensitive and accurate detection of E2. The method modified titanium dioxide (TiO2) with tungsten selenide (WSe2) nanoflowers to synthesize WSe2/TiO2 heterostructures as a substrate for signal amplification and nanoprobe modification. Isothermal nucleic acid amplification strategy has been proven to be a powerful tool for strong signal amplification. The presence of a target triggered the nucleic acid amplification reaction, and produced a large amount of tDNA that competed with G-quadruplex immobilized on the electrode surface. The remaining G-quadruplex/hemin catalyzed the 4-chloro-1-naphthol (4-CN) to form biocatalytic precipitation (BCP) and ABTS-H2O2 chromogenic reaction, thus, the dual-mode platform was capable of achieving PEC-colorimetric ultrasensitive detection based on the catalytic activity of G-quadruplex/hemin DNAzyme. Within optimal conditions, the dual-mode biosensor exhibited a remarkable detection limit as low as 0.026 pM.

SIGNIFICANCE

Benefiting from the superior performance of WSe2/TiO2 and the power signal amplification of isothermal nucleic acid amplification strategy, this aptasensor achieved the ultrasensitive detection of E2. The independent transmission paths of photoelectrochemical and colorimetric provide mutual support and flexible switching, significantly enhancing the overall sensitivity and accuracy of the detection strategy, which can meet the needs for E2 precise quantification and rapid on-site detection.

Anabolic steroids in livestock production: Background and implications for chemical food safety

The use of steroids in livestock animals is a source of concern for consumers because of the risks associated with the presence of their residues in foodstuffs of animal origin. Technological advances such as mass spectrometry have made it possible to play a fundamental role in controlling such practices, firstly for the discovery of marker metabolites but also for the monitoring of these compounds under the regulatory framework. Current control strategies rely on the monitoring of either the parent drug or its metabolites in various matrices of interest. As some of these steroids also have an endogenous status specific strategies have to be applied for control purposes. This review aims to provide a comprehensive and up-to-date knowledge of analytical strategies, whether targeted or non-targeted, and whether they focus on markers of exposure or effect in the specific context of chemical food safety regarding the use of anabolic steroids in livestock. The role of new approaches in data acquisition (e.g. ion mobility), processing and analysis, (e.g. molecular networking), is also discussed.

Light-activated, dual-mode fluorescence and colorimetric detection of estradiol with high fidelity based on aptamer's special recognition

The intake of estradiol residue from food will lead to health problems, so the rapid and reliable detection of estradiol residue is essential. Multi-mode assays are inherently self-correcting and self-validating, providing more reliable, interference-resistant, high-fidelity results. Here, we developed a dual-mode method to achieve a rapid, reliable, and sensitive detection of estradiol. The binding of thioflavin T to the cavity sites of estradiol aptamer not only generates a strong fluorescence signal, but also provides light-activated oxidase activity to produce a blue oxidation product. But the specific binding between aptamer and estradiol will compete with the above process. Thus a dual-mode fluorescence and colorimetric detection of estradiol was realized with a detection limit of 0.15 μM or 0.27 μM. Besides, the dual-mode method showed a good selectivity for estradiol detection. The method could detect estradiol in meat food, showing a good application potential to monitor endocrine-disrupting chemical.

Recent progresses in compound specific isotope analysis of halogenated persistent organic pollutants. Assessing the transformation of halogenated persistent organic pollutants at contaminated sites

Compound specific isotope analysis was extensively used to characterise the environmental processes associated with the abiotic and biotic transformation of persistent halogenated organic pollutants including those of contaminants of emerging concern (CECs). In the last years, the compound specific isotope analysis was applied as tool to evaluate the environmental fate and was expanded to larger molecules like brominated flame retardants and polychlorinated biphenyls. Multi-element (C, H, Cl, Br) CSIA methods have been also employed both in laboratory and field experiments. Nevertheless, despite the instrumental advances of isotope ratio mass spectrometers systems, the instrumental detection limit for gas chromatography-combustion-isotope ratio mass spectrometer (GC-C-IRMS) systems is challenging, especially when it is utilized to δ13C analysis. Liquid chromatography-combustion isotope ratio mass spectrometry methods are challenging, taking into consideration the chromatographic resolution required when analysing complex mixtures. For chiral contaminants, enantioselective stable isotope analysis (ESIA) has turned up as alternative approach but, up to now, it has been used for a limited number of compounds. Taking into consideration the occurrence of new emerging halogenated organic contaminants, new GC and LC methods for non-target screening using high resolution mass spectrometry are needed to be developed prior to the compound specific isotope analysis (CSIA) methods.

Dual-Mode Electrochemical Competitive Immunosensor Based on Cd2+/Au/Polydopamine/Ti3C2 Composite and Copper-Based Metal-Organic Framework for 17β-Estradiol Detection

Herein, a dual-mode electrochemical competitive immunosensor was constructed for the detection of 17β-estradiol (E2) based on differential pulse voltammetry (DPV) and chronoamperometry (i-t). During the immune recognition process, the E2 antibody (E2-Ab) was immobilized on the Cd²⁺/Au/polydopamine/Ti₃C₂ (Cd²⁺/Au/pDA/Ti₃C₂) composite-modified electrode; then, the E2-conjugated bovine serum albumin (E2-BSA) was labeled with a copper-based metal-organic framework (Cu-MOF) and competed with E2 in combining the E2-Ab. The Cu-MOF was not only an electroactive species but also possessed good electrocatalytic activity toward H₂O₂. Thus, E2 could be quantified according to the peak current change of the Cu-MOF in DPV curve or the variation of H₂O₂ reduction current. For DPV quantification, Cd²⁺ was introduced as an internal reference in this case, and a highly reproducible ratio readout was obtained. The as-prepared dual-mode E2 electrochemical immunosensor showed good linear relationship in the ranges of 1 pg mL^-1-10 ng mL^-1 (DPV) and 10 pg mL^-1-10 ng mL^-1 (i-t), and the detection limits were 0.47 and 5.4 pg mL^-1 (S/N = 3), respectively. Furthermore, the dual-mode electrochemical immunosensor exhibited good practicability in real sample analysis.

Sample Preparation and Analytical Methods for Steroid Hormones in Environmental and Food Samples: An Update Since 2012

Steroid hormones (SHs) have been widely used over the past few decades as both human and veterinary drugs to prevent or treat infectious diseases and anti-inflammatory benefits in clinical. Unfortunately, their residues in foodstuffs and environmental samples can produce adverse effects on human and animal life such as disrupting the endocrine system. For these reasons, sensitive, simple and efficient methods have been developed for the determination of these compounds in various matrices. This critical review summarized the articles published in the period from 2012 to 2019 and can be used to help researchers to understand development of the sample pretreatment protocols and analytical methods used to detect SHs. The developed extraction and purification techniques used for steroids in different samples, such as cloud point extraction, solid phase extraction based on different novel materials, microextraction methods, QuEChERS and other methods are summarized and discussed. Analytical methods used to quantify these compounds, such as different chromatography methods, electrochemical methods, as well as other methods, are illustrated and compared. We focused on the latest advances in SHs pretreatment, and the application of new technologies in SHs analysis.

A novel hybrid micro extraction for the sensitive determination of 17β-estradiol in water samples

A novel and green hybrid of pipette tip micro solid-phase extraction (PT-μSPE) and supported liquid extraction (SLE) was tailored and established for efficient and sensitive determination of 17β-estradiol (E2) in water samples. The hybrid design used chitin as a solid phase in PT-μSPE and applies the SLE principle on it for micro extraction. The analytical setup was termed as chitin-supported pipette tip-micro liquid extraction (CPT-μLE). E2 is a highly active environmental endocrine disruptor, widely spread in the water environment, and thus it is relevant to develop a novel and noble method for its monitoring at trace concentrations in water. The detection and quantification of E2 were performed via HPLC-UV. Under the optimal conditions, E2 showed excellent linearity in the lower scale range of 0.02-20 ng mL-1, and the correlation coefficient (R2) value was 0.9958. The limit of quantitation (LOQ) and limit of detection (LOD) were 0.01 ng mL-1 and 0.008 ng mL-1, respectively, with inter-day and intra-day precision in the range of 3.2-5.1% and 3.6-4.8%, respectively. The method was successfully applied for the sensitive determination of E2 in real water samples. Overall, the method is simple, rapid, technically innovative, cost-effective, highly sensitive, environment friendly, and highly efficient. Furthermore, this method should allow easy expansion to pharmaceutical and biological samples. Finally, this novel hybrid analytical approach proposes a new direction in sample pre-treatment advancements and should act as a reference for other noble analytical advancements in the trace analysis of various emerging contaminants in environmental and biological matrices.

Development and Application of Aptamer-Based Surface-Enhanced Raman Spectroscopy Sensors in Quantitative Analysis and Biotherapy

Surface-enhanced Raman scattering (SERS) is one of the most special and important Raman techniques. An apparent Raman signal can be observed when the target molecules are absorbed onto the surface of the SERS substrates, especially on the "hot spots" of the substrates. Early research focused on exploring the highly active SERS substrates and their detection applications in label-free SERS technology. However, it is a great challenge to use these label-free SERS sensors for detecting hydrophobic or non-polar molecules, especially in complex systems or at low concentrations. Therefore, antibodies, aptamers, and antimicrobial peptides have been used to effectively improve the target selectivity and meet the analysis requirements. Among these selective elements, aptamers are easy to use for synthesis and modifications, and their stability, affinity and specificity are extremely good; they have been successfully used in a variety of testing areas. The combination of SERS detection technology and aptamer recognition ability not only improved the selection accuracy of target molecules, but also improved the sensitivity of the analysis. Variations of aptamer-based SERS sensors have been developed and have achieved satisfactory results in the analysis of small molecules, pathogenic microorganism, mycotoxins, tumor marker and other functional molecules, as well as in successful photothermal therapy of tumors. Herein, we present the latest advances of the aptamer-based SERS sensors, as well as the assembling sensing platforms and the strategies for signal amplification. Furthermore, the existing problems and potential trends of the aptamer-based SERS sensors are discussed.

Selective detection of water pollutants using a differential aptamer-based graphene biosensor

Graphene field-effect transistor (GFET) sensors are an attractive analytical tool for the detection of water pollutants. Unfortunately, this application has been hindered by the sensitivity of such sensors to nonspecific disturbances caused by variations of environmental conditions. Incorporation of differential designs is a logical choice to address this issue, but this has been difficult for GFET sensors due to the impact of fabrication processes and material properties. This paper presents a differential GFET affinity sensor for the selective detection of water pollutants in the presence of nonspecific disturbances. This differential design allows for minimization of the effects of variations of environmental conditions on the measurement accuracy. In addition, to mitigate the impact of the fabrication process and material property variations, we introduce a compensation scheme for the individual sensing units of the sensor, so that such variations are accounted for in the compensation-based differential sensing method. We test the use of this differential sensor for the selective detection of the water pollutant 17β-estradiol in buffer and tap water. Consistent detection results can be obtained with and without interferences of pH variations, and in tap water where unknown interferences are present. These results demonstrate that the differential graphene affinity sensor is capable of effectively mitigating the effects of nonspecific interferences to enable selective water pollutant detection for water quality monitoring.

A simple and highly selective electrochemical label-free aptasensor of 17β-estradiol based on signal amplification of bi-functional graphene

In the present work, a convenient signal-on electrochemical label-free aptasensor for 17β-estradiol (E2), a typical steroidal hormones endocrine disrupting chemicals, was proposed. 6-mercapto-1-hexanol (MCH) self-assembled monolayer (SAM) modified Au (MCH/Au) electrode was used as the substrate electrode. Graphene is used with bi-functions, not only to adsorb E2 binding aptamer, serving as the recognition element to E2, but also to be assembled onto MCH/Au electrode when sensing E2, to controllably turn on the electron transfer (eT), and further indicate the signal to E2 concentration. With the synergistic effect of DNase I enzyme, highly sensitive detection of E2 was achieved at this aptasensing system, with a linear range from 0.07 to 10 pM and a detection limit of 50 fM. An outstanding selectivity towards E2 was proven for the sensing system by simultaneously detecting 100-fold potential co-existing interferences. The stability and reproducibility were also evaluated to be satisfactory. Spiked real water analysis further indicated its reliability and potential in practical environmental monitoring.

Double strand DNA functionalized Au@Ag Nps for ultrasensitive detection of 17β-estradiol using surface-enhanced raman spectroscopy

A detection method for 17β-estradiol (E2) using surface-enhanced Raman scattering (SERS)-based aptamer sensor was presented. Raman reporter molecule Cy3 labeled E2-aptamer and DNA functionalized gold-silver core-shell nanoparticles (Au@Ag CS NPs) offered SERS with high sensitivity and selectivity. Based on the fabricated double strand DNA-immobilized gold-silver core-shell nanoparticles (Au@Ag NPs), SERS signal intensity of Raman reporter changed with the number of Cy3-labeled aptamer attached to the core-shell nanoparticles due to the strong binding affinity between the aptamers and E2 with different concentrations. A wide linear range from 1.0 × 10^-13 to 1.0 × 10^-9 was obtained for the detection of E2, with a low detection limit of 2.75 fM. This proposed method showed highly sensitive and selective for detecting E2, and could be used to determine E2 in actual samples.

Oxygen Vacancy Engineering in Europia Clusters/Graphite-Like Carbon Nitride Nanostructures Induced Signal Amplification for Highly Efficient Electrochemiluminesce Aptasensing

Oxygen vacancy is an intrinsic defect in metal oxide semiconductors and has a crucial influence on their physicochemical and electronic properties. To boost the electrochemiluminescence (ECL) efficiency of the graphite-like carbon nitride (g-C₃N₄), the wet-chemical-calcination method was developed to introduce an oxygen vacancy in Eu-doped g-C₃N₄ nanostructures for the first time. The morphology and structure characterization suggest that the Eu element was present in the matrix of the europia (Eu₂O₃) clusters. Because of the effect of oxygen vacancy promoting catalytic activity, the doping of Eu caused a great positive shift of onset potential and large signal amplification in cathodic ECL signals compared with pure g-C₃N₄. Furthermore, a novel and ultrasensitive ECL aptasensor was realized with 17β-estradiol (E2) as a prototype target by adsorption of E2 aptamer onto the Eu₂O₃-doped g-C₃N₄ (Eu₂O₃- g-C₃N₄) surface via van der Waals force. Given the specific recognition between aptamer and E2, the ECL signal decreased with the increasing concentration of E2, because the formation of E2-aptamer complex impeded the diffusion of luminophor molecules and the electrons approaching the surface of the electrode. Under the optimal cases, the as-prepared ECL aptasensor showed superior performances and also manifested outstanding selectivity toward E2. The present conceptual strategy offers a novel methodology to boost the sensitivity of the ECL sensor and promote the activity of ECL reagents.

Carbon isotope ratios of endogenous steroids in Belgian Blue and Holstein cattle: Method development, reference population studies and application to steroid misuse control

RATIONALE

The misuse of growth promoters in livestock and breeding animals is prohibited according to the laws of the European Union. Among these growth promoters, the detection of endogenous steroids like testosterone, estradiol or progesterone remains especially challenging as concentration-based urinary thresholds may not provide conclusive results due to large inter-individual variations. In addition to the detection of intact steroid esters in blood or hair, carbon isotope ratio (CIR) determination of urinary steroids has commonly been the method of choice.

METHODS

A comprehensive sample clean-up procedure was developed and validated, which enables for the first time simultaneous CIR measurements of testosterone metabolites (17α-hydroxyandrost-4-en-3-one, 3α-hydroxy-5β-androstan-17-one and 5α-androstane-3β,17α-diol), the estradiol metabolite 17α-estradiol (ESTR) and the progesterone metabolite 5β-pregnane-3α,20α-diol (PD) from a single urine specimen. As endogenous reference compounds 3β-hydroxyandrost-5-en-17-one and 5-androstene-3β,17α-diol (5EN) were chosen. The method was validated by means of linear mixing models and a reference population encompassing n = 53 Belgian Blue and Holstein cattle was investigated to enable the calculation of population-based Δ¹³ C thresholds.

RESULTS

The combined measurement uncertainty determined for the Δ¹³ C-values of all steroids under investigation was found to be <0.8 ‰. Within the reference population studies, 5EN was demonstrated to be the most promising endogenous reference compound resulting in comparably low Δ-values and accompanying thresholds. For PD, a surprisingly high number of samples (n = 9) yielded significantly ¹³ C-depleted values and ESTR was only detectable in n = 13 samples. Proof-of-concept was accomplished by investigating two post-administration samples.

CONCLUSIONS

This first comprehensive investigation on the CIRs of endogenous urinary steroids demonstrated once more the potential of isotope ratios in aiding discrimination between endogenously produced and exogenously administered steroids. By means of the reference population-derived CIRs, it is possible to apply cattle-specific thresholds to differentiate between treated and non-treated animals.

Applicability of an innovative steroid-profiling method to determine synthetic growth promoter abuse in cattle

A robust LC-MS/MS method was developed to quantify a large number of phase I and phase II steroids in urine. The decision limit is for most compounds lower than 1ngml^-1 with a measurement uncertainty smaller than 30%. The method is fully validated and was applied to assess the influence of administered synthetic steroids and beta-agonists on the steroidogenesis. From three animal experiments, clenbuterol, diethylstilbestrol and stanozolol, the steroid profiles in urine of bovine animals were compared before and after treatment. It was demonstrated that the steroid profiles were altered due to these treatments. A predictive multivariate model was built to identify deviations from normal population steroid profiles. The abuse of synthetic steroids can be detected in urine samples from bovine animals using this model. The samples from the animal experiments were randomly analysed using this method and predictive model. It was shown that these samples were predicted correctly in the exogenous steroids group.

Ensuring food safety using aptamer based assays: Electroanalytical approach

Aptamers, are being increasingly employed as favorable receptors for constructing highly sensitive biosensors, for their remarkable affinities towards certain targets including a wide scope of biological or chemical substances, and their superiority over other biologic receptors. The selectivity and affinity of the aptamers have been integrated with the wise design of the assay, applying suitable modifications, such as nanomaterials on the electrode surface, employing oligonucleotide-specific amplification strategies or, their combinations. After successful performance of the electrochemical aptasensors for biomedical applications, the food sector with its direct implication for human health, which demands rapid and sensitive and economic analytical solutions for determination of health threatening contaminants in all stages of production process, is the next field of research for developing efficient electrochemical aptasensors. The aim of this review is to categorize and introduce food hazards and summarize the recent electrochemical aptasensors that have been developed to address these contaminants.

The use of gas chromatography-mass spectrometry/combustion/isotope ratio mass spectrometry to demonstrate progesterone treatment in bovines

Currently, no analytical method is available to demonstrate progesterone administration in biological samples collected in rearing animals, and therefore, tracking the abuse of this popular growth promoter is arduous. In this study, a method is presented to reveal progesterone (PG) treatment on the basis of carbon isotope measurement of 5β-pregnane-3α, 20α-diol (BAA-PD), a major PG metabolite excreted in bovine urine, by gas chromatography-mass spectrometry/combustion/isotope ratio mass spectrometry (GC-MS/C/IRMS). 5-Androstene-3β,17α-diol (AEdiol) is used as endogenous reference compound. Intermediate precisions (n=11) of 0.56‰ and 0.68‰ have been determined for AEdiol and BAA-PD, respectively. The analytical method was used for the very first time to successfully differentiate urine samples collected in treated and untreated animals.

A universal label-free fluorescent aptasensor based on Ru complex and quantum dots for adenosine, dopamine and 17β-estradiol detection

Based on specific aptamer binding properties, a strategy for adenosine, dopamine and 17β-estradiol detection was realised by employing Ru complex and quantum dots (QDs) as fluorescence probes. Ru complex, which could quench the fluorescence of QDs, preferred to bind with aptamer DNA and resulted in the fluorescence rise of QDs. When the aptamer DNA was incubated with the target first, it could not bind with Ru complex and the fluorescence of QDs was quenched. Under the optimal condition, the fluorescence intensity was linearly proportional to the concentration of adenosine, dopamine and 17β-estradiol with a limit of detection (LOD) of 101 nM, 19 nM and 37 nM, respectively. The experiments in fetal bovine serum were also carried out with good results. This universal method was rapid, label-free, low-cost, easy-operating and highly repeatable for the detection of adenosine, dopamine and 17β-estradiol. Qualitative detection by naked eyes was also available without complex instruments. It could also be extended to detect various analytes, such as metal ions, proteins and small molecules by using appropriate aptamers.

Current trends in mass spectrometry of peptides and proteins: Application to veterinary and sports-doping control

Detection of misuse of peptides and proteins as growth promoters is a major issue for sport and food regulatory agencies. The limitations of current analytical detection strategies for this class of compounds, in combination with their efficacy in growth-promoting effects, make peptide and protein drugs highly susceptible to abuse by either athletes or farmers who seek for products to illicitly enhance muscle growth. Mass spectrometry (MS) for qualitative analysis of peptides and proteins is well-established, particularly due to tremendous efforts in the proteomics community. Similarly, due to advancements in targeted proteomic strategies and the rapid growth of protein-based biopharmaceuticals, MS for quantitative analysis of peptides and proteins is becoming more widely accepted. These continuous advances in MS instrumentation and MS-based methodologies offer enormous opportunities for detection and confirmation of peptides and proteins. Therefore, MS seems to be the method of choice to improve the qualitative and quantitative analysis of peptide and proteins with growth-promoting properties. This review aims to address the opportunities of MS for peptide and protein analysis in veterinary control and sports-doping control with a particular focus on detection of illicit growth promotion. An overview of potential peptide and protein targets, including their amino acid sequence characteristics and current MS-based detection strategies is, therefore, provided. Furthermore, improvements of current and new detection strategies with state-of-the-art MS instrumentation are discussed for qualitative and quantitative approaches.

Simultaneous Detection of Androgen and Estrogen Abuse in Breeding Animals by Gas Chromatography-Mass Spectrometry/Combustion/Isotope Ratio Mass Spectrometry (GC-MS/C/IRMS) Evaluated against Alternative Methods

The administration of synthetic homologues of naturally occurring steroids can be demonstrated by measuring (13)C/(12)C isotopic ratios of their urinary metabolites. Gas chromatography-mass spectrometry/combustion/isotope ratio mass spectrometry (GC-MS/C/IRMS) was used in this study to appraise in a global approach isotopic deviations of two 17β-testosterone metabolites (17α-testosterone and etiocholanolone) and one 17β-estradiol metabolite (17α-estradiol) together with those of 5-androstene-3β,17α-diol as endogenous reference compound (ERC). Intermediate precisions of 0.35‰, 1.05‰, 0.35‰, and 0.21‰, respectively, were observed (n = 8). To assess the performance of the analytical method, a bull and a heifer were treated with 17β-testosterone propionate and 17β-estradiol-3-benzoate. The sensitivity of the method permitted the demonstration of 17β-estradiol treatment up to 24 days. For 17β-testosterone treatment, the detection windows were 3 days and 24 days for the bull and the heifer, respectively. The capability of GC-MS/C/IRMS to demonstrate natural steroid abuse for urinary steroids was eventually compared to those of mass spectrometry (LC-MS/MS) when measuring intact steroid esters in blood and hair.

Evaluation of the discriminative potential of a novel biomarker for estradiol treatments in bovine animals

The endogenous occurrence of natural hormones obstructs the application of classical targeted methods as confirmatory options. In the case of estradiol, the ultimate confirmation of its exogenous administration relies on gas chromatography coupled to combustion/isotope ratio mass spectrometry (GC-C/IRMS). A serum dipeptide composed of pyroglutamic acid and phenylalanine was identified as a potential biomarker of estradiol treatments in adult cows. To evaluate its potential to pinpoint suspicious samples, samples from prepubertal females under different estrogenic treatments have been analyzed. The results confirmed the up-regulation of the dipeptide in adult bovines. The 2-week-old females exhibited short-lasting responses only in a few animals. The 6-month-old female showed a delayed but clear increase on the biomarker level. The composition of the anabolic preparations, the dose, and/or the administration route are possible additional reasons for the reduced response in young animals. A comparison to previous results reported by various researchers is included.

Molecularly imprinted polymer on magnetic graphene oxide for fast and selective extraction of 17β-estradiol

A novel nanosized substrate imprinted polymer (MIPs-GO-Fe3O4) was developed on a magnetic graphene oxide (GO-Fe3O4) surface for selective recognition and fast removal of 17β-estradiol (17β-E2). The characteristics of MIPs-GO-Fe3O4 were evaluated by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy. and vibrating sample magnetometer (VSM). Results suggested that GO had a thin single-layer structure anchoring Fe3O4 nanoparticles and that the imprinted film was coated on the GO-Fe3O4 surface. MIPs-GO-Fe3O4 was sensitive to the magnetic field and could be easily separated using an external magnet. The adsorption results indicated that the kinetic value and binding capacity of MIPs-GO-Fe3O4 were 0.0062 g (mg·min)(-1) and 4.378 μmol g(-1), respectively. The Langmuir-Freundlich isotherm and pseudo-second-order kinetic models were the main adsorption mechanisms for MIPs-GO-Fe3O4. MIPs-GO-Fe3O4 showed excellent recognition selectivity, as well as enrichment and separation abilities for 17β-E2 in complex matrices. MIPs-GO-Fe3O4 was also used to analyze 17β-E2 in real food samples, and satisfactory recoveries such as 84.20% with relative standard deviation (RSD) of 4.67% at a spike of 0.5 μmol L(-1) were obtained. Thus, the MIPs-GO-Fe3O4-based method provided a convenient and practical platform for the separation, enrichment, and removal of 17β-E2 in food samples.

Development of an SI-Traceable HPLC-Isotope Dilution Mass Spectrometry Method To Quantify β-Lactoglobulin in Milk Powders

β-Lactoglobulin (β-LG) is one of the major allergenic proteins in milk. There is an urgent demand for an accurate and traceable method to develop β-LG certified reference material (CRM). In this work, β-LG was enzymatically digested and a specific peptide was chosen for quantitation by isotope-dilution mass spectrometry (IDMS). With amino acid CRMs as standards, the results could be traced to SI unit. By the proposed method, the recovery ranged from 86.0% to 118.3% with CVs <9.0%. The LOD and LOQ were 4.8 × 10^-5 g/g and 1.6 × 10^-4 g/g of β-LG in milk powder, respectively. Ten samples from domestic market were analyzed with CVs <5.6%, and the relative expanded uncertainties ranged from 4.2% to 5.9% (k = 2). With the CRMs, it is expected that the comparability of β-LG quantitation results will be improved among different laboratories.