Influence of casein-phospholipid combinations as emulsifier on the physical and oxidative stability of fish oil-in-water emulsions

Insight into the effects of large yellow croaker roe (Larimichthys Crocea) phospholipids on the conformational and functional properties of pork myofibrillar protein

The large yellow croaker roe phospholipids (LYPLs), rich in polyunsaturated fatty acids, is a potential phospholipid additive for meat products. In this work, the effects of LYPLs on the structural and functional properties of myofibrillar protein (MP) were determined, and compared with egg yolk phospholipids (EYPLs) and soybean phospholipids (SBPLs). The results revealed that LYPLs, similar to SBPLs and EYPLs, induced a transformation in the secondary structure of MP from α-helix to β-sheets and random coils, while also inhibited the formation of carbonyl and disulfide bonds within MP. All three phospholipids induced MP tertiary structure unfolding, with the greatest degree of unfolding observed in MP containing LYPLs. The MP with LYPLs had the highest surface hydrophobicity, emulsification properties and gel strength. In addition, MP with LYPLs added also demonstrated superior rheological properties and water-holding capacity compared with SBPLs and EYPLs. In conclusion, adding LYPLs endowed MP with improved functional properties.

Characterization and molecular docking of sustainable wine lees and gelatin-based emulsions: innovative fat substitution

BACKGROUND

The present study aimed to determine how various amounts (0.00, 0.58, 1.52 and 4.50 g 100 g-1) of wine lees (WL), which contains numerous essential components, impact the emulsifying properties of fish gelatin (FG) at a low concentration (0.5 g 100 g-1) in the high-fat phase (65 g 100 g-1). This study conducted rheology, physicochemical technical and characterization analyses on the emulsions to provide sustainable and innovative approaches for spreadable oils.

RESULTS

The addition of WL to FG emulsions improved oxidative stability, emulsion stability and bioactive compounds. The zeta potential (-101 ± 5.62 mV) of 0.58 g 100 g-1 WL-containing emulsion (PE1) was found to be high, whereas particle size (347.6 ± 5.25 nm) and polydispersity index (0.50) were statistically low. It was also found that the addition of WL improved the intermolecular interactions, crystallinity and microstructural properties of the emulsions. All these results were supported by simulating the molecular configuration between FG and WL. The compounds gallic acid, caffeic acid, myricetin, quercetin and resveratrol showed a strong affinity to FG, with free binding energies of -5.50, -5.88, -6.53, -6.68 and -6.66 kcal mol-1, respectively.

CONCLUSION

As a result, WL-supported FG has the potential to be used as an alternative to egg proteins to develop sustainable low-cost spreadable emulsions. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Lipid oxidation in emulsions: New insights from the past two decades

Lipid oxidation constitutes the main source of degradation of lipid-rich foods, including food emulsions. The complexity of the reactions at play combined with the increased demand from consumers for less processed and more natural foods result in additional challenges in controlling this phenomenon. This review provides an overview of the insights acquired over the past two decades on the understanding of lipid oxidation in oil-in-water (O/W) emulsions. After introducing the general structure of O/W emulsions and the classical mechanisms of lipid oxidation, the contribution of less studied oxidation products and the spatiotemporal resolution of these reactions will be discussed. We then highlight the impact of emulsion formulation on the mechanisms, taking into consideration the new trends in terms of emulsifiers as well as their own sensitivity to oxidation. Finally, novel antioxidant strategies that have emerged to meet the recent consumer's demand will be detailed. In an era defined by the pursuit of healthier, more natural, and sustainable food choices, a comprehensive understanding of lipid oxidation in emulsions is not only an academic quest, but also a crucial step towards meeting the evolving expectations of consumers and ensuring the quality and stability of lipid-rich food products.

The Bioactivity and Physicochemical Properties of Emulsions Based on Tamanu, Moringa, and Inca Inchi Oils

With increasing bacterial resistance to antibiotics, novel strategies for protection against microbial infections are crucial. Emulsions enhance the solubility of natural antibacterial oils and their uptake, making them promising drug delivery systems. However, it is important to find the right emulsifier to ensure that the oil has the right dispersion and does not adversely affect its antibacterial properties. Hence, this study investigated emulsions created from three vegetable oils: moringa oil from Moringa oleifera seeds, inca inchi oil from Plukenetia volubilis seeds, and tamanu oil from the Calophyllum inophyllum fruit. Emulsions were formed using two natural emulsifiers, lecithin and casein, at concentrations of 2.5%, 5%, and 10% (w/w). The study assessed the oil and emulsions' characteristics, including the zeta potential, creaming index, and particle size distribution. The antimicrobial properties of these oils and the most stable emulsions were examined. Gas chromatography was used to analyze the oil compositions. The potential antimicrobial properties of emulsions formulated with natural oils was proved. Particularly noteworthy were emulsions containing a 2.5% inca inchi or tamanu oil, stabilized with casein. The particle size ranged between 100 nm and 900 nm with the average size 300 nm. These emulsions also showed antibacterial activity against selected strains, and the strongest effect was observed for the system with inca inchi oil, which reduced S. epidermidis bacterial activity by more than 60%. Therefore, it can be expected that the completed research will allow the development of antibacterial systems based on inca inchi or tamanu oils for use in the food industry.

Formation, characterization, and antigenicity of lecithin-β-conglycinin complexes

Lipid binding has been proposed to represent a functional property of many allergenic proteins. This study investigated the formation, characterization, and antigenicity of lecithin-β-conglycinin complexes. The results indicate that lecithin was combined with β-conglycinin via static quenching and primarily driven by hydrogen bonds and van der Waals forces. In addition, heat treatment reduced the antigenicity of complexes, as evidenced by changes in molecular weight and secondary and tertiary structures. It revealed that large aggregates developed and more hydrophobic regions were exposed for complexes after heat treatment, as well as a decrease in the β-sheet contents and an increase in the β-turn and random coil contents. Furthermore, the average particle size of the complexes increased with increased temperature treatment, and the morphology of the complexes exhibited an amorphous polymer. These findings shedlight on the interaction between lecithin and β-conglycinin and help us understand the role of lecithin in allergic reactions.

Phospholipids molecular species, proteins secondary structure, and emulsion microstructure of egg yolk with reduced polar and/or nonpolar lipids

This study investigated the phospholipids (PLs) molecular species (PLs-MS), protein secondary structure (PSS), and emulsion microstructure of the egg yolk (EY) treated with supercritical-CO₂ (T1), hexane (T2), and ethanol {at room temperature (T3) and 65 °C (T4)}. PLs-MS, PSS, and microstructure of EY emulsion were investigated with UPLC-Q-TOF-MS, Fourier-transforms infrared and Raman spectroscopy, and confocal laser scanning microscope, respectively. Predominant PLs molecular fractions were C18:0-C20:4, C18:0-C20:4, C16:0-C18:2, C16:0, C18:0-C18:2, and d18:1/16:0, for phosphatidylcholine, phosphatidylethanolamine, phosphatidylinositol, lysophosphatidylcholine, sphingomyelin, and phosphatidylserine, respectively. All the PLs-MS were highest for T1 and many of them (C14:0-C16:0, C18:0-C18:1, C18:0-C20:3) were absent in T2, T3, and T4. PSS components (α-helices, β-sheets, β-turn, and random coil) were highest for T4, followed by T3, T2, T1, and control (non-treated EY). However, T1-added o/w emulsion showed excellent stability (95.64 %) with smaller and denser oil droplets due to better ionic interactions by synergistic effect of PLs-MS and PSS components.

Oxidation and oxidative stability in emulsions

Emulsions are implemented in the fabrication of a wide array of foods and therefore are of great importance in food science. However, the application of emulsions in food production is restricted by two main obstacles, that is, physical and oxidative stability. The former has been comprehensively reviewed somewhere else, but our literature review indicated that there is a prominent ground for reviewing the latter across all kinds of emulsions. Therefore, the present study was formulated in order to review oxidation and oxidative stability in emulsions. In doing so, different measures to render oxidative stability to emulsions are reviewed after introducing lipid oxidation reactions and methods to measure lipid oxidation. These strategies are scrutinized in four main categories, namely storage conditions, emulsifiers, optimization of production methods, and antioxidants. Afterward, oxidation in all types of emulsions, including conventional ones (oil-in-water and water-in-oil) and uncommon emulsions in food production (oil-in-oil), is reviewed. Furthermore, the oxidation and oxidative stability of multiple emulsions, nanoemulsions, and Pickering emulsions are taken into account. Finally, oxidative processes across different parent and food emulsions were explained taking a comparative approach.

Correlation between interfacial layer properties and physical stability of food emulsions: current trends, challenges, strategies, and further perspectives

Emulsions are thermodynamically unstable systems that tend to separate into two immiscible phases over time. The interfacial layer formed by the emulsifiers adsorbed at the oil-water interface plays an important role in the emulsion stability. The interfacial layer properties of emulsion droplets have been considered the cutting-in points that influence emulsion stability, a traditional motif of physical chemistry and colloid chemistry of particular significance in relation to the food science and technology sector. Although many attempts have shown that high interfacial viscoelasticity may contribute to long-term emulsion stability, a universal relationship for all cases between the interfacial layer features at the microscopic scale and the bulk physical stability of the emulsion at the macroscopic scale remains to be established. Not only that, but integrating the cognition from different scales of emulsions and establishing a unified single model to fill the gap in awareness between scales also remain challenging. In this review, we present a comprehensive overview of recent progress in the general science of emulsion stability with a peculiar focus on interfacial layer characteristics in relation to the formation and stabilization of food emulsions, where the natural origin and edible safety of emulsifiers and stabilizers are highly requested. This review begins with a general overview of the construction and destruction of interfacial layers in emulsions to highlight the most important physicochemical characteristics of interfacial layers (formation kinetics, surface load, interactions among adsorbed emulsifiers, thickness and structure, and shear and dilatational rheology), and their roles in controlling emulsion stability. Subsequently, the structural effects of a series of typically dietary emulsifiers (small-molecule surfactants,proteins, polysaccharides, protein-polysaccharide complexes, and particles) on oil-water interfaces in food emulsions are emphasized. Finally, the main protocols developed for modifying the structural characteristics of adsorbed emulsifiers at multiple scales and improving the stability of emulsions are highlighted. Overall, this paper aims to comprehensively study the literature findings in the past decade and find out the commonality of multi-scale structures of emulsifiers, so as to deeply understand the common characteristics and emulsification stability behaviour of adsorption emulsifiers with different interfacial layer structures. It is difficult to say that there has been significant progress in the underlying principles and technologies in the general science of emulsion stability over the last decade or two. However, the correlation between interfacial layer properties and physical stability of food emulsions promotes revealing the role of interfacial rheological properties in emulsion stability, providing guidance on controlling the bulk properties by tuning the interfacial layer functionality.

Interfacial characteristics and in vitro digestion of emulsion coated by single or mixed natural emulsifiers: lecithin and/or rice glutelin hydrolysates

BACKGROUND

The interfacial characteristics and in vitro digestion of emulsion were related to emulsifier type. The mean droplet diameter, ζ-potential, microstructure, interfacial tension, Quartz crystal microbalance with dissipation (QCM-D) and in vitro gastrointestinal fate of emulsions stabilized by soybean lecithin, hydrolyzed rice glutelin (HRG) and their mixture were researched.

RESULTS

The value of interfacial tension was much more dramatically declined for the sample containing 20 g kg^-1 of HRG. For QCM-D, a rigid layer was formed for all the samples after rinsing. The layer thickness was 0.87 ± 0.20, 2.11 ± 0.31 and 2.63 ± 0.22 nm, and adsorbed mass was 87.17 ± 10.31, 210.56 ± 20.12 and 263.09 ± 23.23 ng cm^-2 , for HRG, lecithin and HRG/lecithin, respectively, indicating both HRG and lecithin were adsorbed at the oil-water interface. Structural rearrangements at the interface occurred for HRG/lecithin. The kinetics and final amount of lipid digestion depended on emulsifier type: lecithin > HRG/lecithin > HRG. These differences in digestion rate were primarily due to differences in the aggregation state of the emulsifiers.

CONCLUSION

The incorporation of lecithin into HRG emulsions had better interfacial properties comparing with HRG emulsion and facilitated lipid digestibility. These results provide important information for the rational design of plant-based functional food. © 2021 Society of Chemical Industry.

Co-delivery of insulin and quercetin in W/O/W double emulsions stabilized by different hydrophilic emulsifiers

Insulin (hydrophilic) and quercetin (hydrophobic) have broad biological benefits; however, their rapid hydrolysis (via protease degradation) during digestion hinders their stability and delivery for absorption before degrading. In this study, we encapsulated insulin and quercetin using a self-assembled water-in-oil-in-water (W/O/W) double emulsion. We prepared the co-delivery emulsion by two-step emulsification and investigated the effects of the type of hydrophilic emulsifier for the outer water phase on the physicochemical properties, stability, and digestive properties. The black-bean-protein-stabilized W/O/W double emulsion had a higher absolute zeta potential value (52.80 mV), higher encapsulation efficiency (insulin: 95.7%, quercetin: 93.4%), lower viscosity, better emulsifying properties (EAI: 122.26 m²/g, ESI: 224 min), and lower levels of hydroperoxides (0.86 mmol/L) and TBARS (25.80 μmol/L) than emulsions stabilized by other hydrophilic emulsifiers. The emulsion yielded a 2.60- and 4.56-fold increase in the bioaccessibility of insulin and quercetin, respectively, while increasing their chemical stability and solubility under simulated gastrointestinal conditions.

The fabrication, characterization, and application of chitosan-NaOH modified casein nanoparticles and their stabilized long-term stable high internal phase Pickering emulsions

The demand for facile delivery systems from natural biopolymers with long-term storage stability to deliver liposoluble nutraceuticals such as β-carotene (BC) is increasing. In this work, a facile and reliable emulsifier of chitosan (CS)-NaOH-modified casein (CA) nanoparticles (NPs) was fabricated for the stabilization of high internal phase Pickering emulsions (HIPPEs) with versatile stability. Dynamic light scattering, TEM, FTIR, and interface tension results indicated that CS-CA NPs exhibited nanoscale (109-373 nm), positive charge (22-38 mV), pH-response, spherical in shape, assembled spontaneously by non-covalent interactions, and high surface activity. Optical microscopy, confocal laser scanning microscopy (CLSM), and rheometer results demonstrated that HIPPEs were emulsified by a dense and compact 3D network between the continuous phase and the interfacial region. Hence, the CS-CA NP-stabilized HIPPEs showed long-term storage stability (over 18 months at ambient temperature) and thermostabilization (1 month at 80 °C). The robust and compact CS-CA NPs dramatically declined the contents of primary and secondary oxidation production in HIPPEs than that by corn oil. Moreover, CS-CA NPs stabilized HIPPEs appreciably enhanced the bioaccessibility (2.56 times) and chemical stability (thermal, UV-light, and storage) of BC. This research evidenced that CS-protein or polysaccharide-CA-based systems could be an encouraging formulation to commercially construct tunable HIPPEs with adorable stability for liposoluble nutraceuticals with enhanced attributes.

Effect of ultrasound on protein functionality

The review focus on the effect of ultrasound on protein functionality. The presence of transient ultrasonic mechanical waves induce various sonochemical and sonomechanical effects on a protein. Sonochemical effects include the breakage of chains and/or the modification of side groups of aminoacids. Sonomechanical modifications by enhanced molecular agitation, might lead to the transient or permanent modification of the 3D structure of the folded protein. Since the biological function of proteins depends on the maintenance of its 3D folded structure, both sonochemical and sonomechanical effects might affect its properties. A protein might maintain its 3D structure and functionality after minor sonochemical effects, however, the enhanced mass transfer by sonomechanical effects might expose internal hydrophobic residues of the protein, making protein unfolding to an irreversible denatured state. Ultrasound enhanced mass transport effects are unique pathways to change the 3D folded structure of proteins which lead to a new functionality of proteins as support shield materials during the formation microspheres. Enzymes are proteins and their reactions should be conducted in a reactor set-up where enzymes are protected from sonic waves to maximize their catalytic efficiency. In this review, focused examples on protein dispersions/emulsions and enzyme catalysis are given.

A comprehensive review on polarity, partitioning, and interactions of phenolic antioxidants at oil-water interface of food emulsions

There has been a growing interest in developing effective strategies to inhibit lipid oxidation in emulsified food products by utilization of natural phenolic antioxidants owing to their growing popularity over the past decades. However, due to the complexity of emulsified systems, the inhibition mechanism of phenolic antioxidants against lipid oxidation is rather complicated and not yet fully understood. In order to highlight the importance of polarity of phenolic antioxidants in emulsified systems according to the polar paradox, this review covers the recent progress on chemical, enzymatic, and chemoenzymatic lipophilization techniques used to modify the polarity of antioxidants. The partitioning behavior of phenolic antioxidants at the oil-water interface, which can be influenced by the presence of synthetic surfactants and/or antioxidant emulsifiers (e.g., polysaccharides, proteins, and phospholipids), is discussed. In addition, the emerging phenolic antioxidants among phenolic acids, flavonoids, tocopherols, and stilbenes applied in food emulsions are elaborated. As well, the interactions of polar-nonpolar antioxidants are stressed as a promising strategy to induce synergistic interactions at oil-water interface for improved oxidative stability of emulsions.

Current Progress in the Utilization of Soy-Based Emulsifiers in Food Applications-A Review

Soy-based emulsifiers are currently extensively studied and applied in the food industry. They are employed for food emulsion stabilization due to their ability to absorb at the oil–water interface. In this review, the emulsifying properties and the destabilization mechanisms of food emulsions were briefly introduced. Herein, the effect of the modification process on the emulsifying characteristics of soy protein and the formation of soy protein–polysaccharides for improved stability of emulsions were discussed. Furthermore, the relationship between the structural and emulsifying properties of soy polysaccharides and soy lecithin and their combined effect on the protein stabilized emulsion were reviewed. Due to the unique emulsifying properties, soy-based emulsifiers have found several applications in bioactive and nutrient delivery, fat replacer, and plant-based creamer in the food industry. Finally, the future trends of the research on soy-based emulsifiers were proposed.

Development of a High Internal Phase Emulsion of Antarctic Krill Oil Diluted by Soybean Oil Using Casein as a Co-Emulsifier

Antarctic krill oil (AKO) with 5–30% (w/w) dilution by soybean oil was co-emulsified by phospholipids (PLs) naturally present in AKO and 2% (w/w) casein in the aqueous phase to prepare high internal phase emulsions (HIPEs). The results showed that raising the AKO level resulted in concave-up changes in the mean size of oil droplets which became more densely packed. Confocal laser scanning microscopy (CLSM) and cryo-scanning electron microscopy (cryo-SEM) micrographs revealed that PLs at higher concentrations expelled more casein particles from the oil droplet surface, which facilitated the formation of a crosslinked network structure of HIPEs, leading to reduced mobility of water molecules, extended physical stability, and somewhat solid-like behavior. The rheological analysis showed at lower levels of AKO promoted fluidity of emulsions, while at higher levels it increased elasticity. Lastly, increasing the AKO level slowed down the oxidation of HIPEs. These findings provide useful insights for developing HIPEs of highly viscous AKO and its application in foods.

Design of biopolymer carriers enriched with natural emulsifiers for improved controlled release of thyme essential oil

This work aims to characterize a novel system for thyme essential oil delivery based on the combination of natural emulsifiers (soy protein and soy lecithin) and alginate, produced using the extrusion technique. The formulations are optimized concerning alginate and soy protein concentrations (both 1 to 1.5 wt.%), and consequently lecithin amount, in order to achieve spherical beads in the range 2.0 to 2.3 mm and 1.2 to 1.4 mm, wet and dry, respectively. Fourier-transform infrared analysis was performed, proving that there are interactions between all components. Lecithin-soy protein synergistic combination improved entrapment efficiency of total polyphenols (for nearly 12%) and decreased thymol release in a simulated gastric solution for nearly 35%, in comparison with beads without lecithin. The addition of lecithin enhances the thermal properties of the polysaccharide-protein systems at 50 °C after 3 hr of heating. The mechanical stability of the biopolymer carriers is improved with lecithin addition and the elastic modulus varied from 80.06 to 123.7 kPa, depending on the formulation. Alginate/soy protein/lecithin are effective carriers for the encapsulation, protection, and controlled release of thyme essential oil. PRACTICAL APPLICATION: There is unfortunately growing human resistance to antibiotics. This work offers a novel system for effective protection and controlled release of thyme essential oil in the small intestine. The mechanical and thermal properties of the carrier were estimated as they indicate how the beads will be able to resist stress during their incorporation into food (i.e. cookies-mixing, baking). The proposed approach offers ''green advantage'' as arises from all-natural materials.

Physicochemical and emulsifying properties of mussel water-soluble proteins as affected by lecithin concentration

The effects of lecithin addition at different concentrations (0-2.0%) on the physicochemical and emulsifying properties of mussel water-soluble proteins (MWP) were investigated. In solution system, low lecithin concentration (0.5%-1.0%) induced the aggregation and increased turbidity of composite particles. Lecithin addition caused changes in secondary structure and induced partial unfolding of MWP. Hydrophobic interactions between MWP and lecithin may contribute to the exposure of chromophores and hydrophobic groups of MWP. The interfacial tension decreased with lecithin addition. However, at a high lecithin concentration (1.5%-2.0%), the degree of aggregation and state of unfolding alleviated due to competitive adsorption. In emulsion system, with the low concentration of lecithin addition (0.5%-1.0%), droplet size and surface charge of emulsion decreased. The emulsion activity index, emulsion stability index, percentage of adsorbed protein increased. Both creaming stability and viscoelastic properties improved. At an intermediate lecithin concentration (1.0%), the emulsion showed the highest physical stability, while further addition of lecithin caused a slight deterioration in emulsifying properties. Overall, these results indicated the possibility that the lecithin-MWP mixed emulsifiers can be used to obtain emulsions with desirable properties.

Small-Angle Neutron Scattering Study of High Fat Fish Oil-In-Water Emulsion Stabilized with Sodium Caseinate and Phosphatidylcholine

We report on small-angle neutron scattering (SANS) investigations of separate phase domains in high fat (70%) oil-in-water emulsions emulsified with the combination of sodium caseinate (CAS) and phosphatidylcholine (PC). The emulsion as a whole was studied by contrast variation to identify scattering components dominated by individual emulsifiers. The emulsion was subsequently separated into the aqueous phase and the oil-rich droplet phase, which were characterized separately. Emulsions produced with 1.05% (w/w) CAS and PC fraction which varies between 1.75% (w/w) and 0.35% (w/w) provided droplets between 10 and 19 μm in surface weighted mean in 70% fish oil-in-water emulsions. At least two-third of the overall CAS is associated with the interface, while the rest remains with the aqueous phase. Six percent of PC formed a monolayer in the interface, while the rest of the PC remains in the droplet phase in the form of multilayers. When the separated components were resuspended, the resuspended emulsion showed similar characteristics compared to the original emulsion in terms of droplet size distribution and neutron scattering. Instead, CAS in the aqueous phase separated from the emulsion shows aggregation not present in the corresponding CAS-in-D₂O system.

Influence of Ternary Emulsifier Mixtures on Oxidative Stability of Nanoemulsions Based on Avocado Oil

The aim of this work was to study the effect of two emulsifiers (M1: SL-soy lecithin, Tw80-Tween 80 and CasCa-calcium caseinate and M2: SL-soy lecithin, Tw80-Tween 80 and SE-sucrose esters) on the oxidative stability of avocado oil-based nanoemulsions. Oil-in-water nanoemulsions were prepared using 3.6% w/w of two emulsifier mixtures, which were optimized by mixture experimental design in order to minimize particle size (PS) and polydispersity index (PdI). Then, the oxidative stability of nanoemulsions was evaluated through both an induction period and a quantification of hydroperoxides and thiobarbituric acid reactive species (TBARs) under accelerated storage conditions. The simplex-centroid mixture design showed that PS and PdI varied when proportions of different emulsifiers were modified, obtaining an optimized concentration for each mixture of: 85% SL, 10% Tw80 and 5%CasCa (M1) and 85% SL, 7.4% Tw80 and 7.6% SE (M2) that produced nanoemulsions with PS ~116 nm and PdI < 0.2. Nanoemulsions elaborated with M1 and M2 presented similar particle characteristics and physical stability to the control sample with Tw80. However, M1 nanoemulsions were more stable against lipid oxidation, since they showed the highest induction period and lower formation of hydroperoxides and TBARs during storage.

Interfacial structure of 70% fish oil-in-water emulsions stabilized with combinations of sodium caseinate and phosphatidylcholine

We report on the structural evaluation of high fat fish oil-in-water emulsions emulsified with sodium caseinate (CAS) and phosphatidylcholine (PC). The microemulsions contained 70% (w/w) fish oil with 1.05-1.4% (w/w) CAS and 0.4-1.75% (w/w) PC and were studied by the combination of light scattering together with small-angle X-ray and neutron scattering (SAXS/SANS). Aqueous CAS forms aggregates having a denser core of about 100 kDa and less dense shell about 400 kDa with the hard sphere diameter of 20.4 nm. PC appears as multilayers whose coherence length spans from 40 to 100 nm. PC monolayer separates oil and water phases. Moreover, 80% CAS particles are loosely bound to the interface but are not forming continuous coverage. The distance between aggregated CAS particles in microemulsion is increased compared to CAS aggregates in pure CAS-in-water system. PC multilayers become larger in the presence of oil-water interface compared to the pure PC mixtures. Bilayers become larger with increasing PC concentration. This study forms a structural base for the combination of CAS and PC emulsifiers forming a well-defined thin and dense PC layer together with thick but less dense CAS layer, which is assumed to explain its better oxidative stability compared to single emulsifiers.

Effects of Modified DATEMs with Different Alkyl Chain Lengths on Improving Oxidative and Physical Stability of 70% Fish Oil-in-Water Emulsions

The objective of this study was to produce oxidatively and physically stable 70% fish oil-in-water emulsions by combined use of sodium caseinate (CAS), commercial diacetyl tartaric acid esters of mono- and diglycerides (DATEM), and modified DATEM. First, the optimal formula was determined using DATEM and CAS. Subsequently, modified DATEMs (DATEM C12 and DATEM C14) were designed for investigating both the effects of different alkyl chain lengths and caffeic acid conjugation to the emulsifier on physical and oxidative stability of the emulsions. Emulsions produced with modified DATEMs showed better oxidative stability compared with emulsion using commercial DATEM plus an equivalent amount of free caffeic acid, confirming the advantage of having antioxidant covalently attached to the emulsifier. Results indicated that DATEM_C14 replaced more CAS compared with DATEM_C12 from the interface in 70% fish oil-in-water emulsion. Emulsions produced with DATEM_C14 had significantly decreased amounts of primary and secondary oxidation products compared with emulsions using DATEM_C12.

Enhanced fish oil-in-water emulsions enabled by rapeseed lecithins obtained under different processing conditions

It is hypothesized that rapeseed lecithins may have different emulsifying and antioxidant properties in delivering fish oil compared to soy lecithin based on previous studies. The results showed that in vitro antioxidant activities of rapeseed lecithins were stronger than those of soy lecithin. Emulsions stabilized by rapeseed based lecithins and DATEM were stable over 3 months at 4 °C, whereas the creaming of emulsions containing soy lecithin started immediately after its preparation. Zeta-potential of rapeseed lecithins was higher than soy lecithin and DATEM, which partially contributed to the emulsion stability. Although the particle sizes of emulsions prepared by rapeseed lecithins increased after 14 days storage, no creaming was observed. Lipid oxidation as indicated by TBARS values suggested that DATEM was the most unfavorable, followed by soy lecithin. It is concluded that rapeseed lecithins are better than soy lecithin and DATEM in terms of emulsion stability and antioxidant capability, respectively.

Physical and oxidative stability of high fat fish oil-in-water emulsions stabilized with sodium caseinate and phosphatidylcholine as emulsifiers

The physical and oxidative stability of high-fat omega-3 delivery systems such as fish oil-in-water emulsions stabilized with combinations of sodium caseinate (CAS) and phosphatidylcholine (PC) was optimized. The influence of fish oil content (50, 60 and 70%, w/w), amount of total emulsifier CAS + PC (1.4, 2.1 and 2.8%, w/w) and ratio between CAS and PC (0.4, 1.2 and 2) on physical and oxidative parameters was investigated. Creaming and droplet size significantly decreased when the amount of fish oil, total emulsifier and ratio of CAS to PC were increased. Viscosity decreased significantly with decreasing fish oil content, whereas the ratio of CAS to PC did not have a significant influence. Decreasing the ratio of CAS to PC led to emulsions with a significantly lower concentration of 1-penten-3-ol, while no significant effect was found for other volatiles such as (E)-2-pentenal, (E)-2-hexenal and (E,E)-2,4-heptadienal.

Soy Protein Isolate-Phosphatidylcholine Nanoemulsions Prepared Using High-Pressure Homogenization

The nanoemulsions of soy protein isolate-phosphatidylcholine (SPI-PC) with different emulsion conditions were studied. Homogenization pressure and homogenization cycle times were varied, along with SPI and PC concentration. Evaluations included turbidity, particle size, ζ-potential, particle distribution index, and turbiscan stability index (TSI). The nanoemulsions had the best stability when SPI was at 1.5%, PC was at 0.22%, the homogenization pressure was 100 MPa and homogenization was performed 4 times. The average particle size of the SPI-PC nanoemulsions was 217 nm, the TSI was 3.02 and the emulsification yield was 93.4% of nanoemulsions.

Hypocholesterolemic Effects of Kenaf Seed Oil, Macroemulsion, and Nanoemulsion in High-Cholesterol Diet Induced Rats

This study aimed to evaluate the effect of kenaf seed oil (KSO), kenaf seed oil-in-water macroemulsion (KSOM), kenaf seed oil-in-water nanoemulsions (KSON), and emulsifier mixtures (EM) on serum lipid profile, liver oxidative status, and histopathological changes in high-cholesterol fed rats. Stability and characteristic of KSOM and KSON were carried out prior to in vivo study. Forty-two Sprague-Dawley rats were divided into 7 groups (6 rats each) and induced hypercholesterolemia by feeding high cholesterol diet (HCD) for 14 days prior to treatments. Different treatments were introduced on day 15 to 29 while supplemented with HCD and removal of HCD during treatment on day 30 to 43, except for HCD group. Body weight and serum lipid profiles were measured at 3 different points: after hypercholesterolemia was induced, on day 29, and at the end of the experiment. Relative liver weight, atherogenic index, coronary risk index, and fecal total bile acids were also determined at the end of experiment. KSON showed significantly higher stability than KSOM and FTIR exhibited good encapsulation of KSO after 1.5 years of storage. Serum total cholesterol, low density lipoprotein cholesterol, lipid peroxidation levels in HCD group without treatment were significantly higher compared to normal control group and all treatment groups. All samples demonstrated hypocholesterolemic effect, but KSON exhibited higher efficiency in cholesterol-lowering properties, weight control and decreased liver fat as confirmed by histopathological evaluation. The overall results revealed that the efficacy of different treatments was in descending order of KSON, KSO, KSOM, and EM.

PRACTICAL APPLICATION

Kenaf seed oil-in-water nanoemulsion (KSON) has the potential to be used as a natural alternative to the synthetic hypocholesterolemic drug in the future. However, larger sample size and clinical trial are needed to confirm on this potential application. In addition, treatment with KSON was suggested to prevent cardiovascular disease and fatty liver.

Physical and Oxidative Stability of Flaxseed Oil-in-Water Emulsions Fabricated from Sunflower Lecithins: Impact of Blending Lecithins with Different Phospholipid Profiles

There is great interest in the formulation of plant-based foods enriched with nutrients that promote health, such as polyunsaturated fatty acids. This study evaluated the impact of sunflower phospholipid type on the formation and stability of flaxseed oil-in-water emulsions. Two sunflower lecithins (Sunlipon 50 and 90) with different phosphatidylcholine (PC) levels (59 and 90%, respectively) were used in varying ratios to form emulsions. Emulsion droplet size, charge, appearance, microstructure, and oxidation were measured during storage at 55 °C in the dark. The physical and chemical stability increased as the PC content of the lecithin blends decreased. The oxidative stability of emulsions formulated using Sunlipon 50 was better than emulsions formulated using synthetic surfactants (SDS or Tween 20). The results are interpreted in terms of the impact of emulsifier type on the colloidal interactions between oil droplets and on the molecular interactions between pro-oxidants and oil droplet surfaces.