Preparation of ferulic acid from agricultural wastes: its improved extraction and purification

Ferulic acid triggering a co-production of 4-vinyl guaiacol and fumaric acid from lignocellulose-based carbon source by Rhizopus oryzae

Plant secondary metabolites have attracted considerable attention due to the increasing demand for finite fossil resources and environmental concerns. However, the biosynthesis of aromatic aldehydes or alcohols from renewable resources remains challenging and costly. This study explores a novel approach performed by the aromatic catabolizing organism Rhizopus oryzae, which enables a ferulic acid-activated co-production of 4-vinyl guaiacol (4-VG) and fumaric acid. The strain produced 4.60 g/L 4-VG and 11.25 g/L fumaric acid from a mixed carbon source of glucose and xylose, suggesting that this new pathway allows the potential production of natural 4-VG from low-cost substrates. This green route, which utilizes Rhizopus oryzae's ability to efficiently convert various renewable resources into valuable chemicals, paves the way for improved catalytic efficiency in 4-VG production.

In vivo reduction of skin inflammation using ferulic acid-loaded lipid vesicles derived from Brewer's spent grain

Breweŕs spent grain (BSG) is the main by-product of the brewing industry, and due to its rapid decomposition, it generates serious environmental problems such as malodors and greenhouse gases emissions. On the other hand, this lignocellulosic compound contains a large number of antioxidants, being ferulic acid (FA) the most abundant. FA is a powerful antioxidant molecule that has demonstrated significant protective effects on key components of the skin, including keratinocytes, fibroblasts, collagen, and elastin. FA inhibits melanogenesis, promotes angiogenesis and accelerates the wound healing although its use is limited by its rapid oxidation. In this study, different hydrolysis treatments (chemical, enzymatic and hydrothermal) were performed on BSG to obtain FA. Herein FA-loaded ultradeformable liposomes (ULs) were designed to improve their stability and in vivo performance. These nanosystems allow FA permeability through human skin, as proven by an ex vivo skin permeability assay using Franz diffusion cells. The toxicity and anti-inflammatory activity of the formulation has been investigated. The free form and 100 nm FA_ULs were evaluated. Cell viability was dose-dependent and provided optimal results for the treatment of inflammatory skin conditions in an in vivo Oxazolone-induced Delayed Type Hypersensitivity model using Swiss CD1 mice, demonstrated by the reduction of the inflammatory cytokines expression, ear thickness, bioluminescence and histological evaluation. These results pave the way for FA-based treatments of skin and inflammatory conditions.

Expression of a Recombinant Cholesterol Esterase from Mustela putorius furo in Pichia pastoris and Its Applicability for γ-Oryzanol Hydrolysis

Ferulic acid (FA) exhibits antioxidant and anti-inflammatory properties, making it valuable for numerous industrial applications. Traditionally, FA is produced by the alkaline hydrolysis of γ-oryzanol, which is typically associated with wastewater generation. Recently, an increasing demand of natural FA necessitates its green production via enzymatic hydrolysis of γ-oryzanol, a mixture comprising triterpene alcohol ferulates and phytosteryl ferulates. Thus far, γ-oryzanol can be hydrolyzed by only four commercial cholesterol esterases with low yields. Herein, we report a recombinant cholesterol esterase from Mustela putorius furo (MPFCE) for the enzymatic hydrolysis of γ-oryzanol. The enzyme yielded 25.5% FA, which is the highest reported through enzymatic means thus far. The hydrolysis profile revealed that the enhanced yield primarily resulted from the near-complete hydrolysis of phytosteryl ferulates, together with slight hydrolysis of triterpene alcohol ferulates. MPFCE serves as a potential candidate for the enzymatic production of FA through targeted hydrolysis of γ-oryzanol.

Combined dilute alkali and milling process enhances the functionality and gut microbiota fermentability of insoluble corn fiber

In this study, we developed a process combining dilute alkali (NaOH or NaHCO3) and physical (disk milling and/or ball milling) treatments to improve the functionality and fermentability of corn fiber. The results showed that combining chemical with physical processes greatly improved the functionality and fermentability of corn fiber. Corn fiber treated with NaOH followed by disk milling (NaOH-DM-CF) had the highest water retention (19.5 g/g), water swelling (38.8 mL/g), and oil holding (15.5 g/g) capacities. Moreover, NaOH-DM-CF produced the largest amount (42.9 mM) of short-chain fatty acid (SCFA) during the 24-hr in vitro fermentation using porcine fecal inoculum. In addition, in vitro fermentation of NaOH-DM-CF led to a targeted microbial shifting to Prevotella (genus level), aligning with a higher fraction of propionic acid. The outstanding functionality and fermentability of NaOH-DM-CF were attributed to its thin and loose structure, decreased ester linkages and acetyl groups, and enriched structural carbohydrate exposure.

Simple phenylpropanoids: recent advances in biological activities, biosynthetic pathways, and microbial production

Covering: 2000 to 2023Simple phenylpropanoids are a large group of natural products with primary C6-C3 skeletons. They are not only important biomolecules for plant growth but also crucial chemicals for high-value industries, including fragrances, nutraceuticals, biomaterials, and pharmaceuticals. However, with the growing global demand for simple phenylpropanoids, direct plant extraction or chemical synthesis often struggles to meet current needs in terms of yield, titre, cost, and environmental impact. Benefiting from the rapid development of metabolic engineering and synthetic biology, microbial production of natural products from inexpensive and renewable sources provides a feasible solution for sustainable supply. This review outlines the biological activities of simple phenylpropanoids, compares their biosynthetic pathways in different species (plants, bacteria, and fungi), and summarises key research on the microbial production of simple phenylpropanoids over the last decade, with a focus on engineering strategies that seem to hold most potential for further development. Moreover, constructive solutions to the current challenges and future perspectives for industrial production of phenylpropanoids are presented.

Antioxidant Activity of Biogenic Cinnamic Acid Derivatives in Polypropylene

Antioxidants (AOs) from natural resources are an attractive research area, as petroleum-based products can be replaced in polymer stabilization. Therefore, novel esters based on the p-hydroxycinnamic acids p-coumaric acid, ferulic acid and sinapic acid were synthesized and their structure properties relationships were investigated. The structures of the novel bio-based antioxidants were verified using NMR and Fourier-transform infrared (FTIR) spectrometry. The high thermal stability above 280 °C and, therefore, their suitability as potential plastic stabilizers were shown using thermal gravimetric analysis (TGA). The radical scavenging activity of the synthesized esters was evaluated by using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. Stabilization performance was evaluated in polypropylene (PP) using extended extrusion experiments, oxidation induction time (OIT) measurements and accelerated heat aging. In particular, the sinapic acid derivative provides a processing stability of PP being superior to the commercial state-of-the-art stabilizer octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate.

Extraction of Gallic Acid and Ferulic Acid for Application in Hair Supplements

Food supplements based on antioxidants and vitamins are often prescribed to correct inefficiencies in the human diet and delay diseases such as premature aging and alopecia (temporary or permanent hair loss), given the free radical scavenging activity of these biomolecules. By reducing the concentration of reactive oxygen species (ROS), which promote abnormal hair follicle cycling and morphology, follicle inflammation and oxidative stress are reduced, minimising the effects of these health issues. Gallic acid (GA), which is significantly present in gallnuts and in pomegranate root bark, and ferulic acid (FA), commonly found in brown rice and coffee seeds, are very important antioxidants for the preservation of hair colour, strength and growth. In this work, these two secondary phenolic metabolites were successfully extracted in the Aqueous Two-Phase Systems (ATPS) {ethyl lactate (1) + trisodium citrate (2) + water (3)} and {ethyl lactate (1) + tripotassium citrate (2) + water (3)} at 298.15 K and 0.1 MPa, moving towards the application of these ternary systems in extracting antioxidants from biowaste and their a posteriori processing as food supplements for hair fortification. The studied ATPS provided biocompatible and sustainable media for the extraction of gallic acid and ferulic acid, yielding low mass losses (<3%) and contributing to an eco-friendlier production of therapeutics. The most promising results were obtained for ferulic acid, which attained maximum partition coefficients (K) of 15 ± 5 and (3 ± 2) · 10¹ and maximum extraction efficiencies (E) of (92.7 ± 0.4)% and (96.7 ± 0.4)% for the longest tie-lines (TLL = 69.68 and 77.66 m%) in {ethyl lactate (1) + trisodium citrate (2) + water (3)} and {ethyl lactate (1) + tripotassium citrate (2) + water (3)}, respectively. Moreover, the effect of pH on the UV-Vis absorbance spectra was studied for all the biomolecules to minimise errors in solute quantification. Both GA and FA were found to be stable at the used extractive conditions.

Ferulic Acid: A Natural Phenol That Inhibits Neoplastic Events through Modulation of Oncogenic Signaling

Despite the immense therapeutic advances in the field of health sciences, cancer is still to be found among the global leading causes of morbidity and mortality. Ethnomedicinally, natural bioactive compounds isolated from various plant sources have been used for the treatment of several cancer types and have gained notable attention. Ferulic acid, a natural compound derived from various seeds, nuts, leaves, and fruits, exhibits a variety of pharmacological effects in cancer, including its proapoptotic, cell-cycle-arresting, anti-metastatic, and anti-inflammatory activities. This review study presents a thorough overview of the molecular targets and cellular signaling pathways modulated by ferulic acid in diverse malignancies, showing high potential for this phenolic acid to be developed as a candidate agent for novel anticancer therapeutics. In addition, current investigations to develop promising synergistic formulations are also discussed.

Targeting cofactors regeneration in methylation and hydroxylation for high level production of Ferulic acid

Ferulic acid (FA) is a natural methylated phenolic acid which represents various bioactivities. Bioproduction of FA suffers from insufficient methyl donor supplement and inefficient hydroxylation. To overcome these hurdles, we first activate the S-adenosylmethionine (SAM) cycle in E. coli by using endogenous genes to supply sufficient methyl donor. Then, a small protein Fre is introduced into the pathway to efficiently regenerate FADH₂ for the hydroxylation. Remarkably, regeneration of these two cofactors dramatically promotes FA synthesis. Together with decreasing the byproducts formation and boosting precursor supply, the titer of FA reaches 5.09 g/L under fed-batch conditions, indicating a 20-fold improvement compared with the original producing E. coli strain. This work not only establishes a promising microbial platform for industrial level production of FA and its derivatives, but also highlights a convenient and effective strategy to enhance the biosynthesis of chemicals requiring methylation and FADH₂-dependent hydroxylation.

Biotransformation of Agricultural By-Products into Biovanillin through Solid-State Fermentation (SSF) and Optimization of Different Parameters Using Response Surface Methodology (RSM)

Vanillin is a flavorful and aromatic secondary metabolite found in vanilla plants. Natural vanillin, produced through processed vanilla beans accounts for scarcely 0.2% of industrial requirements. Vanillin produced via chemical methods and microbial fermentation fills the remaining gap. Among naturally available precursors for biovanillin synthesis, ferulic acid is widely used because of its structural similarity and abundant availability. Herein, various agricultural lignocellulosic by-products (sugarcane bagasse, wheat straw, rice straw, rice bran, and corn cob) were scrutinized for their ferulic acid content, and their biotransformation into biovanillin was examined by solid-state fermentation (SSF). Then, different physicochemical parameters, i.e., moisture content, pH, temperature, inoculum size, and incubation days, were optimized to achieve a high yield of biovanillin using central composite design (CCD) of response surface methodology (RSM). Among agricultural by-products tested, sugarcane bagasse produced 0.029 g/100 g of biovanillin using Enterobacter hormaechei through SSF. After optimization, the highest concentration of biovanillin (0.476 g/100 g) was achieved at a moisture content of 70%, temperature of 37.5 °C, pH 7.5, inoculum size of 4 mL and incubation time of 48 h. The F-value of 6.10 and p-value of 0.002 evidenced the ultimate significance of the model. The significance of the constructed model was supported by the 91.73% coefficient of determination (R2), indicating that the effects of moisture, pH, and temperature were significant. HPLC and FTIR confirmed the sample identification and purity (was reported to be 98.3% pure). In conclusion, sugarcane bagasse appears to be a cost-effective substrate choice for large-scale biovanillin production.

Valorization of Fruit Peels into Biovanillin and Statistical Optimization of Process Using Enterobacter hormaechei through Solid-State Fermentation

Vanillin is a secondary metabolite of plants and the major organoleptic aroma component of natural vanilla. Nowadays, the chemical synthesis method used for vanillin production has been rejected by the United States and European legislation, while plant-derived vanillin is expensive. The current study demonstrates vanillin production via solid-state fermentation (SSF) by Enterobacter hormaechei using different ferulic acid-rich fruit peels as substrates. From different ferulic acid-rich fruit peels (pomegranate, banana, and orange) screened Punica granatum (pomegranate) peels yielded maximum biovanillin (0.09 mg/g) after 24 h. Different bioprocess parameters, including moisture content, inoculum size, pH, and temperature, were optimized using central composite design (CCD) of the response surface methodology (RSM). The maximum biovanillin yield (0.462 mg/g) from Punica granatum peels was achieved at 60% moisture content, 2 mL inoculum size, 6.5 pH, and 32 °C temperature. An F-value of 12.94 and a p-value of 0.00 were recorded by the variance analysis indicated the proposed model’s significance. The coefficient of determination (R2) confirmed the model’s goodness of fit, having a value of 91.89%, which indicated the model’s accuracy. The optimally produced biovanillin was extracted and confirmed using FTIR. Further purity analysis was done by HPLC and the biovanillin was reported to be 99.2% pure. The results demonstrated that microbial conversion of ferulic acid-rich fruit peels to biovanillin offers a cost-effective approach for the industrial production of biovanillin.

Plant Secondary Metabolites: An Opportunity for Circular Economy

Moving toward a more sustainable development, a pivotal role is played by circular economy and a smarter waste management. Industrial wastes from plants offer a wide spectrum of possibilities for their valorization, still being enriched in high added-value molecules, such as secondary metabolites (SMs). The current review provides an overview of the most common SM classes (chemical structures, classification, biological activities) present in different plant waste/by-products and their potential use in various fields. A bibliographic survey was carried out, taking into account 99 research articles (from 2006 to 2020), summarizing all the information about waste type, its plant source, industrial sector of provenience, contained SMs, reported bioactivities, and proposals for its valorization. This survey highlighted that a great deal of the current publications are focused on the exploitation of plant wastes in human healthcare and food (including cosmetic, pharmaceutical, nutraceutical and food additives). However, as summarized in this review, plant SMs also possess an enormous potential for further uses. Accordingly, an increasing number of investigations on neglected plant matrices and their use in areas such as veterinary science or agriculture are expected, considering also the need to implement "greener" practices in the latter sector.

Accessing p-Hydroxycinnamic Acids: Chemical Synthesis, Biomass Recovery, or Engineered Microbial Production?

p-Hydroxycinnamic acids (i. e., p-coumaric, ferulic, sinapic, and caffeic acids) are phenolic compounds involved in the biosynthesis pathway of lignin. These naturally occurring molecules not only exhibit numerous attractive properties, such as antioxidant, anti-UV, and anticancer activities, but they also have been used as building blocks for the synthesis of tailored monomers and functional additives for the food/feed, cosmetic, and plastics sectors. Despite their numerous high value-added applications, the sourcing of p-hydroxycinnamic acids is not ensured at the industrial scale except for ferulic acid, and their production cost remains too high for commodity applications. These compounds can be either chemically synthesized or extracted from lignocellulosic biomass, and recently their production through bioconversion emerged. Herein the different strategies described in the literature to produce these valuable molecules are discussed.

Hydrothermal liquefaction of Prosopis juliflora biomass for the production of ferulic acid and bio-oil

The objective of this work was to study the hydrothermal liquefaction (HTL) of Prosopis juliflora biomass for the production of ferulic acid and bio-oil. Biomass was processed with various solvents (NaOH, KOH, HCl and H₂SO₄) to produce ferulic acid (FA). FA oxidation was carried out using the Nano ZnO catalyst to produce an optimum vanillin yield of 0.3 g at 70 °C with 0.4% catalyst loading for a time of 60 min. The spent solid residue was then processed using HTL at 5 MPa pressure and a temperature range of 240-340 °C. Various biomass loading (2.5 g to 12.5 g) was taken for a fixed water content of 200 mL. Bio-oil optimum yield was 22.5 wt% for 10 g/200 mL of biomass loading ratio. The optimum temperature was 300 °C for a processing time of 1 h. The catalyst showed the reusable capability of two three consecutive cycles.

Microbial conversion of vanillin from ferulic acid extracted from raw coir pith

Coir pith, an agro-industrial residue, is resistant to natural degradation, and its accumulation causes environmental pollution. Ferulic acid, a precursor of vanillin, was extracted from the raw coir pith by chemical pre-treatment such as alkaline hydrolysis, acidification, and liquid-liquid extraction method. The obtained ferulic acid (1.2 g/50 g) was analysed using high-performance liquid chromatography (HPLC) and used as a substrate for biotransformation by Aspergillus niger to vanillic acid, which, in turn, was fermented by using Phanerochaete chrysosporium to vanillin. The quantity of vanillic acid detected by HPLC on the third day of incubation was 0.773 g/L, while the optimal yield of vanillin on the subsequent third day of incubation was 0.628 g/L. Thus, the chemical extraction of ferulic acid from coir pith ensued bioconversion into vanillin. These products are highly valuable and economical to be used in industries such as pharmaceuticals, health, cosmetics, and neutraceuticals.

Implementation of Auto-Hydrolysis Process for the Recovery of Antioxidants and Cellulose from Wheat Straw

Wheat straw is an easily affordable, cost-effective and natural source of antioxidants and cellulose, but its full potential is not yet utilized. In the present investigation, an auto-hydrolytic process was applied to recover both antioxidant phenolic compounds and cellulose from wheat straw. Two three-step acid/alkaline fractionation processes were applied differing for the first step: a conventional mild acid hydrolysis or an auto-hydrolysis. The liquors from the first step were analyzed for the recovery of antioxidants, while the final residues from the whole process were analyzed for cellulose yield and purity. The auto-hydrolysis process led to a higher yield in antioxidants but also in sugars (glucose and xylose) and sugar degradation products (5-HMF, 5-MF, furfural) than the acid hydrolysis process. The overall cellulose recovery (about 45% g/100 gcellulose wheat straw dm) and purity was comparable in the two processes; therefore, the auto-hydrolysis-based process could be recommended as a potentially more environmentally friendly process to recover antioxidants and cellulose from wheat straw for different applications. Finally, a first study on the optimization of hydrolysis step was provided from the point of view of improving the cellulose yield, monitoring the sugars release during both the acid hydrolysis and the auto-hydrolysis process.

High-Value-Added Compound Recovery with High-Temperature Hydrothermal Treatment and Steam Explosion, and Subsequent Biomethanization of Residual Strawberry Extrudate

This study was on the comparison of hydrothermal treatments at 170 °C (steam injection) and 220 °C (steam explosion) to solubilize the organic matter contained in residual strawberry extrudate, focusing on phenolic compounds that were susceptible to be extracted and on sugars. After the extraction step, the remaining strawberry extrudate phases were subjected to anaerobic digestion to generate biogas that would compensate the energy requirements of the suggested hydrothermal treatments and to stabilize the remaining waste. Hydrothermal treatment at 220 °C allowed the recovery of 2053 mg of gallic acid eq. per kg of residual strawberry extrudate. By contrast, after hydrothermal treatment at 170 °C, only 394 mg of gallic acid eq. per kg of residual strawberry extrudate was recovered. Anaerobic digestion processes were applied to the de-phenolized liquid phase and the solid phase together, which generated similar methane productions, i.e., around 430 mL CH₄/g volatile solids, after both 170 °C and 220 °C hydrothermal treatments. Considering the latest observation, hydrothermal treatment at 220 °C is a preferable option for the valorization of residual strawberry extrudate (RSE) due to the high solubilization of valuable phenolic compounds that can be recovered.

A biorefinery approach for the production of ferulic acid from agroresidues through ferulic acid esterase of lactic acid bacteria

Ferulic acid is a known precursor for vanillin production but the significance of agro waste as substrates for its extraction, in combination with microbes is a less explored option. Various lactic acid bacteria were screened for the production of ferulic acid esterase (FAE) and Enterococcus lactis SR1 was found to produce maximum FAE (7.54 ± 0.15 IU/ml) in the synthetic medium under submerged fermentation. To make the process cost effective, various lignocellulosic agroresidues were evaluated for the production of FAE from the bacterium. It was found that wheat bran serves as the best substrate for FAE production (4.18 ± 0.12 IU/ml) from E. lactis SR1. Further, optimization of fermentation conditions for FAE production from E. lactis SR1 using wheat bran as carbon source led to an increase in the enzyme production (7.09 ± 0.21 IU/ml) by 1.5 fold. The FAE produced was used alone or in combination with commercial holocellulase for biological release of FA from the tested agroresidues. The highest release of FA (mg/g) by enzymatic extraction occurred in sugarbeet pulp (2.56), followed by maize bran (1.45), wheat bran (1.39) and rice bran (0.87), when both the enzymes (FAE and holocellulase) were used together. Alkaline extraction and purification of ferulic acid (FA) from these agro residues also showed that sugarbeet pulp contains the highest amount of FA (5.5 mg/g) followed by maize bran (3.0 mg/g), wheat bran (2.8 mg/g) and rice bran (1.9 mg/g), similar to the trend obtained in biological/enzymatic extraction of FA from these residues. Furthermore, the substrates were found to release higher reducing sugars when both commercial holocellulase and FAE were used in combination than by the use of holocellulase alone. Thus, FAEs not only release FA but also enabled hemicellulase and cellulase to release more sugars from plant material.

Optimization of enzyme-assisted extraction of ferulic acid from sweet corn cob by response surface methodology

BACKGROUND

Sweet corn cob (SCC), an agricultural by-product of the corn-processing industry, contains more than 80% insoluble bound ferulic acid (FA). Extraction of these bound phenolics can be achieved through chemical or enzymatic hydrolysis; however, the shift towards greener chemistry has raised awareness about the use of enzymatic hydrolysis. In the present study, the ability of ferulic acid esterase (FAE) and xylanase (XY) to catalyze the hydrolysis of FA from SCC was investigated. Response surface methodology (RSM), based on a five-level, four-factor central composite rotatable design (CCRD), was used to establish the optimum conditions for enzymatic hydrolysis of FA from SCC. Sweet corn cob was treated with a combination of FAE and XY at various concentrations (FAE: 0.00 to 0.04 U/g; XY: 0.00 to 18 093.5 U/g), temperatures (45 to 65 °C), and pH levels (pH 4.5 to 6.5).

RESULTS

The optimum extraction conditions predicted by the model were: FAE concentration of 0.02 U/g, XY concentration of 3475.3 U/g, extraction pH of 4.5, and an extraction temperature of 45 °C.

CONCLUSION

Under these conditions, the experimental yield of FA was 1.69 ± 0.02 g kg^-1 of SCC, which is in agreement with the value predicted by the model. © 2019 Society of Chemical Industry.

Lignocellulosic Biomass Mild Alkaline Fractionation and Resulting Extract Purification Processes: Conditions, Yields, and Purities

Fractionation of lignocellulose is a fundamental step in the valorization of cellulose, hemicelluloses, and lignin to produce various sustainable fuels, materials and chemicals. Strong alkaline fractionation is one of the most applied processes since the paper industry has been using it for more than a century, and the mineral acid fractionation process is currently the most applied for the production of cellulosic ethanol. However, in the last decade, mild alkaline fractionation has been becoming increasingly widespread in the frame of cellulosic ethanol biorefineries. It leads to the solubilization of hemicelluloses and lignin at various extent depending on the conditions of the extraction, whereas the cellulose remains insoluble. Some studies showed that the cellulose saccharification and fermentation into ethanol gave higher yields than the mineral acid fractionation process. Besides, contrary to the acid fractionation process, the mild alkaline fractionation process does not hydrolyze the sugar polymers, which can be of interest for different applications. Lignocellulosic mild alkaline extracts contain hemicelluloses, lignin oligomers, phenolic monomers, acetic acid, and inorganic salts. In order to optimize the economic efficiency of the biorefineries using a mild alkaline fractionation process, the purification of the alkaline extract to valorize its different components is of major importance. This review details the conditions used for the mild alkaline fractionation process and the purification techniques that have been carried out on the obtained hydrolysates, with a focus on the yields and purities of the different compounds.

Hydroxycinnamic acids release during bioconversion of corn stover and their effects on lignocellulolytic enzymes

Hydroxycinnamic acids released during alkaline pretreatment of lignocellulose, especially p-coumaric acid (p-CA) and ferulic acid (FA), negatively affect the enzymatic hydrolysis and fermentation. However, the mechanism of this effect is not well understood. In this study, we investigated the releasing behavior and negative effect and examined the underlying mechanisms. The results demonstrated that the hydrogen peroxide concentration and biomass loading affected the release of p-CA and FA significantly during alkaline hydrogen peroxide (AHP) pretreatment of corn stover. p-CA and FA mainly inhibited the activity of endoglucanase, xylanase, and filter paper activity (FPA), while the amount of lignocellulolytic enzyme protein was not affected. Thus, they acted as inhibitors of enzyme activities. Molecular docking study indicated that p-CA and FA inhibited the lignocellulolytic enzyme activity and enzymatic hydrolysis efficiency mainly by forming non-covalent bonds to specific amino acids in the active sites of the lignocellulolytic enzymes.

An Imaging Approach to Identify Mechanisms of Resistance to Pineapple Fruitlet Core Rot

Fruitlet core rot is one of the major postharvest disease of pineapple (Ananas comosus var. comosus). In the past, control strategies were designed to eliminate symptoms without addressing their causes or mechanisms, thus achieving only moderate success. In this study, (i) we focused on the anatomy of the fruitlets in the resistant "MD-2" and susceptible "Queen" pineapple cultivars; (ii) we identified the key role of the carpel margin in the infection process; (iii) we identified the key role of the sinuous layer of thick-walled cells in the inhibition of Fusarium ananatum colonization; and (iv) we linked the anatomy of the fruitlets with the phenolic content of cell walls. The fruitlet anatomy of the two cultivars was studied using X-ray, fluorescence, and multiphoton microscopy. Sepals and bracts were not perfectly fused with each other, allowing the pathogen to penetrate the fruit even after flowering. In fact, the fungi were found in the blossom cups of both cultivars but only became pathogenic in the flesh of the "Queen" pineapple fruit under natural conditions. The outer layer of the "MD-2" cavity was continuous with thick cell walls composed of ferulic and coumaric acids. The cell walls of the "Queen" blossom cup were less lignified at the extremities, and the outer layer was interspersed with cracks. The carpel margins were fused broadly in the "MD-2" pineapple, in contrast to the "Queen" pineapple. This blemish allows the fungus to penetrate deeper into the susceptible cultivar. In pineapple fruitlets, the hyphae of F. ananatum mainly progressed directly between cell walls into the parenchyma but never reached the vascular region. A layer of thick-walled cells, in the case of the resistant cultivar, stopped the colonization, which were probably the infralocular septal nectaries. Anatomical and histochemical observations coupled with spectral analysis of the hypodermis suggested the role of lignin deposition in the resistance to F. ananatum. The major phenolics bound to the cell walls were coumaric and ferulic acids and were found in higher amounts in the resistant cultivar postinoculation. The combination of fruitlet anatomy and lignification plays a role in the mechanism of host resistance to fruitlet core rot.

Comparison of antioxidant capacity of 4-vinylguaiacol with catechin and ferulic acid in oil-in-water emulsion

The product of ferulic acid decarboxylation, 4-vinylguaiacol (4-VG), is an important antioxidant and is reported to have an antioxidant capacity comparable to α-tocopherol. In this study, evaluation on antioxidant capacities of ferulic acid, catechin, and 4-VG was performed when 200 ppm of each compound was added in a 10% O/W emulsion for 50 days. Peroxide value (POV) results of the O/W emulsion containing 4-VG were noteworthy. The POV was 1.9 meq/L of emulsion after 29 days, which was no different to the initial value (day 0). Even when the oxidation was allowed to advance to day 50, the POV remained at 2.2 meq/L of emulsion, representing only a tiny increase relative to the initial value on day 0. ¹H-NMR results also showed that the lowest conjugated forms and no aldehydes were detected in emulsion of 4-VG stored for 50 days, proving the excellent antioxidant capacity in the O/W emulsion.

The structure-antioxidant activity relationship of dehydrodiferulates

In this study, 11 dehydrodiferulic acids (DFAs) and 8 diethyl dehydrodiferulates (DEFs) were synthesized and evaluated by Trolox equivalent antioxidant capacity (TEAC) and 2,2'-diphenyl-1-picrylhydrazyl (DPPH) assays for their antioxidant properties to understand the Structure-Antioxidant Activity Relationship (SAR) of these dehydrodiferulates. In both assays, the order of antioxidant activity for all tested ferulic acid dimers were consistent except for 3-(4-Hydroxy-3-methoxy-benzylidene)-5-(4-hydroxy-3-methoxy-phenyl)-3H-furan-2-one (2, 8-8-lactone DC DFA, not occurred naturally) being the best antioxidant by TEAC test. The order of antioxidant activity of diferulic acid ethyl esters, evaluated by both assays, was not consistent; however, TEAC and DPPH assays provided consistent results for certain set of ethyl diferulates. In this study most of dimeric ferulates, with three exceptions, showed higher radical-scavenging efficacy than the monomers. Comparing the antioxidant activities of the tested diferulates suggested that the phenolic hydroxyl group, electron donating methoxyl group, and stable conjugated transient structures dictate the antioxidant activity of diferulates.

Fruit and Vegetable Waste: Bioactive Compounds, Their Extraction, and Possible Utilization

Fruits and vegetables are the most utilized commodities among all horticultural crops. They are consumed raw, minimally processed, as well as processed, due to their nutrients and health-promoting compounds. With the growing population and changing diet habits, the production and processing of horticultural crops, especially fruits and vegetables, have increased very significantly to fulfill the increasing demands. Significant losses and waste in the fresh and processing industries are becoming a serious nutritional, economical, and environmental problem. For example, the United Nations Food and Agriculture Organization (FAO) has estimated that losses and waste in fruits and vegetables are the highest among all types of foods, and may reach up to 60%. The processing operations of fruits and vegetables produce significant wastes of by-products, which constitute about 25% to 30% of a whole commodity group. The waste is composed mainly of seed, skin, rind, and pomace, containing good sources of potentially valuable bioactive compounds, such as carotenoids, polyphenols, dietary fibers, vitamins, enzymes, and oils, among others. These phytochemicals can be utilized in different industries including the food industry, for the development of functional or enriched foods, the health industry for medicines and pharmaceuticals, and the textile industry, among others. The use of waste for the production of various crucial bioactive components is an important step toward sustainable development. This review describes the types and nature of the waste that originates from fruits and vegetables, the bioactive components in the waste, their extraction techniques, and the potential utilization of the obtained bioactive compounds.

Biocatalytic Synthesis and Polymerization via ROMP of New Biobased Phenolic Monomers: A Greener Process toward Sustainable Antioxidant Polymers

Antioxidant norbornene-based monomers bearing biobased sterically hindered phenols (SHP)—NDF (norbornene dihydroferulate) and NDS (norbornene dihydrosinapate)—have been successfully prepared through biocatalysis from naturally occurring ferulic and sinapic acids, respectively, in presence of Candida antarctica Lipase B (Cal-B). The ring opening metathesis polymerization (ROMP) of these monomers was investigated according to ruthenium catalyst type (GI) vs. (HGII) and monomer to catalyst molar ratio ([M]/[C]). The co-polymerization of antioxidant functionalized monomer (NDF or NDS) and non-active norbornene (N) has also been performed in order to adjust the number of SHP groups present per weight unit and tune the antioxidant activity of the copolymers. The polydispersity of the resulting copolymers was readily improved by a simple acetone wash to provide antioxidant polymers with well-defined structures. After hydrogenation with p-toluenesulfonylhydrazine (p-TSH), the radical scavenging ability of the resulting saturated polymers was evaluated using α,α-diphenyl-β-picrylhydrazyl (DPPH) analysis. Results demonstrated that polymers bearing sinapic acid SHP exhibited higher antiradical activity than the polymer bearing ferulic acid SHP. In addition it was also shown that only a small SHP content was needed in the copolymers to exhibit a potent antioxidant activity.

Binary Solvent Extraction of Tocols, γ-Oryzanol, and Ferulic Acid from Rice Bran Using Alkaline Treatment Combined with Ultrasonication

Alkaline treatment (Alk) combined with ultrasound-assisted extraction (UAE) (Alk+UAE) was examined as a means of extracting tocols and γ-oryzanol from rice bran into an organic phase while simultaneously recovering ferulic acid into an aqueous phase. The tocols and γ-oryzanol/ferulic acid yields were determined using high-performance liquid chromatography with fluorescence and UV detection. The effects of extraction conditions were evaluated by varying the Alk treatment temperature and extraction duration. The maximum yields of tocols and γ-oryzanol were obtained at 25 °C over a time span of 30 min. When the temperature was increased to 80 °C, the yield of ferulic acid increased dramatically, whereas the recovery of γ-oryzanol slightly decreased. Employing the Alk+UAE procedure, the recovered concentrations of tocols, γ-oryzanol, and ferulic acid were in the ranges of 146-518, 1591-3629, and 352-970 μg/g, respectively. These results are in good agreement with those reported for rice bran samples from Thailand.

Feruloyl esterases from Schizophyllum commune to treat food industry side-streams

Agro-industrial side-streams are abundant and renewable resources of hydroxycinnamic acids with potential applications as antioxidants and preservatives in the food, health, cosmetic, and pharmaceutical industries. Feruloyl esterases (FAEs) from Schizophyllum commune were functionally expressed in Pichia pastoris with extracellular activities of 6000UL(-1). The recombinant enzymes, ScFaeD1 and ScFaeD2, released ferulic acid from destarched wheat bran and sugar beet pectin. Overnight incubation of coffee pulp released caffeic (>60%), ferulic (>80%) and p-coumaric acid (100%) indicating applicability for the valorization of food processing wastes and enhanced biomass degradation. Based on substrate specificity profiling and the release of diferulates from destarched wheat bran, the recombinant FAEs were characterized as type D FAEs. ScFaeD1 and ScFaeD2 preferably hydrolyzed feruloylated saccharides with ferulic acid esterified to the O-5 position of arabinose residues and showed an unprecedented ability to hydrolyze benzoic acid esters.

A mass transfer model for the fixed-bed adsorption of ferulic acid onto a polymeric resin: axial dispersion and intraparticle diffusion

In this study, amberlite XAD-16 (XAD-16) bed column system was used to remove ferulic acid (FA) from aqueous solutions. Laboratory-scale column experiments were conducted in downflow fixed bed at initial FA concentration of 1 g/L, initial pH 3, and 25°C. The performance of the adsorbent bed under different flow rates (1.3-7.7 mL/min) was studied. The bed utilization efficiency was in the range of 64.64-72.21% at the studied flow rates. A mass transfer model considering both axial dispersion and intraparticle diffusion was developed to predict the breakthrough curves of FA adsorption on XAD-16. This model predicted the experimental data better than Bohart-Adams model and Thomas model, based on the low deviation between predicted and experimental data. The axial dispersion coefficient value varied from 6.45 × 10(-6) to 1.10 × 10(-6) m(2)/s at flow rate from 1.3 to 7.7 mL/min, whereas the intraparticle diffusion coefficient was 1.04 × 10(-10) m(2)/s, being this last resistance the rate-limiting step. In conclusion, axial dispersion and intraparticle diffusion phenomena play the major role in predicting the adsorption of FA onto XAD-16 in fixed-bed columns.

Adjuvant properties of water extractable arabinoxylans with different structural features from wheat flour against model antigen ovalbumin

Despite the numerous benefits of AX on the immune system and gut bacteria, the potential adjuvant activity of WEAX on immune responses has not been adequately investigated.

Review on technological and scientific aspects of feruloyl esterases: A versatile enzyme for biorefining of biomass

With increasing focus on sustainable energy, bio-refining from lignocellulosic biomass has become a thrust area of research. With most of the works being focused on biofuels, significant efforts are also being directed towards other value added products. Feruloyl esterases (EC. 3.1.1.73) can be used as a tool for bio-refining of lignocellulosic material for the recovery and purification of ferulic acid and related hydroxycinnamic acids ubiquitously found in the plant cell wall. More and more genes coding for feruloyl esterases have been mined out from various sources to allow efficient enzymatic release of ferulic acid and allied hydroxycinnamic acids (HCAs) from plant-based biomass. A sum up on enzymatic extraction of HCAs and its recovery from less explored agro residual by-products is still a missing link and this review brushes up the achieved landmarks so far in this direction and also covers a detailed patent search on this biomass refining enzyme.

Biomedical applications of ferulic acid encapsulated electrospun nanofibers

Ferulic acid is a ubiquitous phytochemical that holds enormous therapeutic potential but has not gained much consideration in biomedical sector due to its less bioavailability, poor aqueous solubility and physiochemical instability. In present investigation, the shortcomings associated with agro-waste derived ferulic acid were addressed by encapsulating it in electrospun nanofibrous matrix of poly (d,l-lactide-co-glycolide)/polyethylene oxide. Fluorescent microscopic analysis revealed that ferulic acid predominantly resides in the core of PLGA/PEO nanofibers. The average diameters of the PLGA/PEO and ferulic acid encapsulated PLGA/PEO nanofibers were recorded as 125 ± 65.5 nm and 150 ± 79.0 nm, respectively. The physiochemical properties of fabricated nanofibers are elucidated by IR, DSC and NMR studies. Free radical scavenging activity of fabricated nanofibers were estimated using di(phenyl)-(2,4,6-trinitrophenyl)iminoazanium (DPPH) assay. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay confirmed the cytotoxicity of ferulic acid encapsulated nanofibers against hepatocellular carcinoma (HepG2) cells. These ferulic acid encapsulated nanofibers could be potentially explored for therapeutic usage in biomedical sector.