Online cleanup of accelerated solvent extractions for determination of adenosine 5'-triphosphate (ATP), adenosine 5'-diphosphate (ADP), and adenosine 5'-monophosphate (AMP) in royal jelly using high-performance liquid chromatography

Cu2Cl(OH)3 nanozyme-based colorimetric sensor array for phosphates discrimination and disease identification

The identification of phosphates holds significant importance in many physiological processes and disease diagnosis, and traditional detection techniques struggle to simultaneously detect and distinguish phosphates. The complexity of synthesizing sensing units restricts the construction of sensor arrays as well. In this study, a bifunctional dicopper chloride trihydroxide (Cu2Cl(OH)3) nanozyme with conspicuous laccase- and peroxidase-like activities has been synthesized in basic deep eutectic solvents (DES). Exploiting the various regulatory impacts of multiple phosphates on the dual-enzyme mimicking activities, the sensor array based on the laccase mimic and peroxidase mimic properties of Cu2Cl(OH)3 was designed, which has been successfully harnessed for the identification of eight phosphates (ATP, ADP, AMP, PPi, Pi, GTP, GDP, and GMP). This approach streamlines the creation of sensor arrays. Besides, the three simulated actual samples (healthy individuals, moderately ill patients, and severely ill patients) have been accurately distinguished. This work makes a substantial contribution to enhancing the highly effective construction of array channels and promoting discrimination of phosphates in intricate samples.

Investigating the Respiratory and Energy Metabolism Mechanisms behind ε-Poly-L-lysine Chitosan Coating's Improved Preservation Effectiveness on Tremella fuciformis

Freshly harvested Tremella fuciformis contains high water content with an unprotected outer surface and exhibits high respiration rates, which renders it prone to moisture and nutrient loss, leading to decay during storage. Our research utilized ε-poly-L-lysine (ε-PL) and chitosan as a composite coating preservative on fresh T. fuciformis. The findings revealed that the ε-PL + chitosan composite coating preservative effectively delayed the development of diseases and reduced weight loss during storage compared to the control group. Furthermore, this treatment significantly decreased the respiration rate of T. fuciformis and the activity of respiratory metabolism-related enzymes, such as alternative oxidase (AOX), cytochrome c oxidase (CCO), succinic dehydrogenase (SDH), 6-phosphogluconate dehydrogenase, and glucose-6-phosphate dehydrogenase (6-PGDH and G-6-PDH). Additionally, the composite coating preservative also delayed the depletion of ATP and ADP and maintained higher levels of the energy charge while preserving low levels of AMP. It also sustained heightened activities of Mg2+-ATPase, Ca2+-ATPase, and H+-ATPase enzymes. These results demonstrate that utilizing the ε-PL + chitosan composite coating preservative can serve as a sufficiently safe and efficient method for prolonging the shelf life of post-harvest fresh T. fuciformis.

A novel "off-on" ratiometric fluorescent aptasensor for adenosine detection based on FRET between quantum dots and graphene oxide

A novel "off-on" ratiometric fluorescent aptasensor was established for adenosine detection based on fluorescence resonance energy transfer (FRET) between CdS QDs, DNA QDs as donor and graphene oxide (GO) as acceptor. Amino-riched DNA QDs covalently bonded to the carboxyl group on the edge of the GO, and with the absorption of the TGA-modified CdS QDs with aptamer (CdS QDs-apt) onto the GO surface via the π-π stacking interaction. The fluorescence of both CdS QDs and DNA QDs were efficiently quenched due to FRET (turn off). When adenosine was present, the specific binding of the aptamer to the target preferentially that released the CdS QDs-apt from GO. The process would inhibit the FRET which contribute to the fluorescence of CdS QDs-apt recovery again (turn on), while the fluorescence intensity of DNA QDs only slightly altered and acted as the reference signal. Thus, a novel "off-on" ratiometric fluorescent aptasensor for adenosine detection was constructed accordingly. There was a good linearity relationship between the ratio of the FL intensity (F595 nm/F464 nm) and the concentration of adenosine in the range of 20.00-180.0 nmol/L with a detection limit of 1.3 nmol/L (S/N = 3, n = 9). Importantly, the feasibility of the developed aptasensor for selective detection of adenosine in serum and urine samples with satisfactory results. The recoveries were observed to be 97.04-100.2 %.

Improvement Effect of Mitotherapy on the Cognitive Ability of Alzheimer's Disease through NAD+/SIRT1-Mediated Autophagy

To date, Alzheimer's disease (AD) has grown to be a predominant health challenge that disturbs the elderly population. Studies have shown that mitochondrial dysfunction is one of the most significant features of AD. Transplantation therapy of healthy mitochondria (mitotherapy), as a novel therapeutic strategy to restore mitochondrial function, is proposed to treat the mitochondria-associated disease. Also, the molecular mechanism of mitotherapy remains unclear. Here, we applied the mitotherapy in AD model mice induced by amyloid-β (Aβ) plaque deposition and suggested that autophagy would be an important mechanism of the mitotherapy. After the healthy mitochondria entered the defective neuronal cells damaged by the misfolded Aβ protein, autophagy was activated through the NAD+-dependent deacetylase sirtuin 1 (SIRT1) signal. The damaged mitochondria and Aβ protein were eliminated by autophagy, which could also decrease the content of radical oxygen species (ROS). Moreover, the levels of brain-derived neurotrophic factor (BDNF) and extracellular-regulated protein kinases (ERK) phosphorylation increased after mitotherapy, which would be beneficial to repair neuronal function. As a result, the cognitive ability of AD animals was ameliorated in a water maze test after the healthy mitochondria were administrated to the mice. The study indicated that mitotherapy would be an effective approach to AD treatment through the mechanism of autophagy activation.

Highly sensitive and stable fluorescent aptasensor based on an exonuclease III-assisted amplification strategy for ATP detection

Fluctuations in intracellular adenosine triphosphate (ATP) concentration are closely associated with some cancer diseases. Thus, it is a worthwhile undertaking to predict sickness by monitoring changes in ATP levels. However, the detection limits of current fluorescent aptamer sensors for ATP detection are in the range of nmol L^-1 to μmol L^-1. It has become crucial to employ amplification strategies to increase the sensitivity of fluorescent aptamer sensors. In the current paper, a duplex hybrid aptamer probe was developed based on exonuclease III (Exo III)-catalyzed target recycling amplification for ATP detection. The target ATP forced the duplex probe configuration to change into a molecular beacon that can be hydrolyzed with Exo III to achieve the target ATP cycling to amplify the fluorescence signal. Significantly, many researchers ignore that FAM is a pH-sensitive fluorophore, leading to the fluorescence instability of FAM-modified probes in different pH buffers. The negatively charged ions on the surface of AuNPs were replaced by new ligands bis(p-sulfonatophenyl)phenylphosphine dihydrate dipotassium salt (BSPP) to improve the drawback of FAM instability in alkaline solutions in this work. The aptamer probe was designed to eliminate the interference of other similar small molecules, showing specific selectivity and providing ultra-sensitive detection of ATP with detection limits (3σ) as low as 3.35 nM. Such detection limit exhibited about 4-500-fold better than that of the other amplification strategies for ATP detection. Thus, a relatively general high sensitivity detection system can be established according to the wide target adaptability of aptamers, which can form specific binding with different types of targets.

Zeolitic imidazolate framework-8 encapsulating gold nanoclusters and carbon dots for ratiometric fluorescent detection of adenosine triphosphate and cellular imaging

A novel nanoprobe was prepared by encapsulating carbon dots (CDs) and gold nanoclusters (AuNCs) into zeolitic imidazolate framework-8 (ZIF-8) for sensitive detecting adenosine triphosphate (ATP). Under excitation at 360 nm, the obtained CDs/AuNCs@ZIF-8 nanoprobe exhibits dual-emissions at 469 nm and 660 nm, respectively, corresponding to the fluorescence emission of CDs and the aggregation-induced emission enhancement (AIEE) of AuNCs. The framework of ZIF-8 in this probe can be degraded by ATP due to the coordination competition of ATP and 2-Methylimidazole towards zinc ion (Zn²⁺), resulting in the release of CDs and AuNCs. The following dispersion of CDs would improve efficiencies of the fluorescence excitation and the consequent emission of CDs. On the contrary, the AIEE of AuNCs would be decreased spontaneously after the AuNCs originally restricted in ZIF-8 were allowed to escape. The intensity ratio of fluorescence at 469 nm to that at 660 nm (I₄₆₉/I₆₆₀) was conveniently employed as the response signal for representing the amount of ATP. This nanoprobe exhibits excellent sensitivity and selectivity toward ATP, with a limit of detection (LOD) of 0.061 μM. Besides, low cytotoxicity of this nanoprobe facilitates its application as a fluorescent indicator in fluorescence imaging of living cells. Encapsulating two types of fluorescent nanomaterials by a degradable ZIF-8 structure makes the ratiometric fluorescence response of the nanocomposite probe towards the target analyte that destroys the ZIF-8 structure possible, and simplifies the application of the probe.

programmably engineered FRET-nanoflare for ratiometric live-cell ATP imaging with anti-interference capability

Herein, we present a poly-adenine (polyA)-mediated programmably engineered FRET-nanoflare for ratiometric intracellular ATP imaging with anti-interference capability. The programmable polyA attachment is advantageous in enhancing the signal response for ATP. Moreover, the FRET-based nanoflare is capable of avoiding false-positive signals due to probe degradation in a complex environment, which has great potential for clinical diagnosis.

A fluorescent aptasensor for ATP based on functional DNAzyme/walker and terminal deoxynucleotidyl transferase-assisted formation of DNA-AgNCs

The development of sensitive adenosine triphosphate (ATP) sensors is imperative due to the tight relationship between the physiological conditions and ATP levels in vivo. Herein, a fluorescent aptasensor for ATP is presented, which adopts a strategy that combines a split aptamer and a DNAzyme/walker with terminal deoxynucleotidyl transferase (TDT)-assisted formation of DNA-AgNCs to realize fluorescence detection of ATP. A multifunctional oligonucleotide sequence is rationally designed, which integrates a split aptamer, a DNAzyme and a DNA walker. Both multifunctional oligonucleotide and its substrate strand are connected to the surface of Fe₃O₄@Au nanoparticles via Au-S bonds. The existence of ATP can induce the formation of the complete aptamer, and then activate the DNAzyme to circularly cleave the substrate strand, leaving 2',3'-cyclophosphate at the 3'end of the strand. This blocks the polymerization of dCTP to form poly(C) even in the presence of TDT and dCTP, due to the lack of free 3'-OH. In contrast, when ATP is absent, the DNAzyme/walker cannot work and then TDT catalyzes the formation of poly(C) at the free 3'-OH of the substrate strand, which is subsequently utilized as the template to prepare DNA-AgNCs. The fluorescence response derived from AgNCs thus reflects the ATP concentration. Under the optimum conditions, the aptasensor shows a linear response range from 5 nM to 10 000 nM, with a detection limit of 0.27 nM. The level of ATP in human serum can be effectively measured by the aptasensor with good recovery, indicating its application potential in medical samples.

Antifouling Electrochemical Biosensor Based on Conductive Hydrogel of DNA Scaffold for Ultrasensitive Detection of ATP

As an energy supplier, ATP plays an important role in various life activities, and there is an urgent need to develop an effective means of detecting ATP. However, the traditional sensors face serious nonspecific adsorption. In this work, an antifouling electrochemical biosensor based on the interpenetrating network of Y-DNA scaffold and polyaniline hydrogel was designed for ATP detection. The polyaniline hydrogel was conducive to the transport of electrons and ions, the structure of Y-DNA cross-linked by ATP aptamers in the polyaniline hydrogel achieved the effect of signal amplification. Super hydrophilic cellulose nanocrystals (CNCs) and zwitterion polypeptide sequence (Pep) were doped to play a synergistic antifouling effect. The hydrogel sensor we have built has a wide linear range of 0.1 pM-1 μM for ATP detection and a low detection limit of 0.025 pM (S/N = 3). For ATP detection in actual serum samples, the recovery of this sensor was 99.5%-106%, and the relative standard deviation was 0.4%-2.88%. It is proven that the sensor has good ATP detection performance, and it will provide a certain reference value for the detection of other biological small molecules.

Fluorescent Aptasensor for Highly Specific Detection of ATP Using a Newly Screened Aptamer

Owing to the significant roles of adenosine triphosphate (ATP) in diverse biological processes, ATP level is used to research and evaluate the physiological processes of organisms. Aptamer-based biosensors have been widely reported to achieve this purpose, which are superior in their flexible biosensing mechanism, with a high sensitivity and good biocompatibility; however, the aptamers currently used for ATP detection have a poor ability to discriminate ATP from adenosine diphosphate (ADP) and adenosine monophosphate (AMP). Herein, an ATP-specific aptamer was screened and applied to construct a fluorescent aptasensor for ATP by using graphene oxide (GO) and strand displacement amplification (SDA). The fluorescence intensity of the sensor is linearly related to the concentration of ATP within 0.1 μM to 25 μM under optimal experimental conditions, and the detection limit is 33.85 nM. The biosensor exhibits a satisfactory specificity for ATP. Moreover, the experimental results indicate that the biosensor can be applied to determine the ATP in human serum. In conclusion, the screened aptamer and the biosensor have promising applications in the determination of the real energy charge level and ATP content in a complex biological system.

Colorimetric detection of ATP by inhibiting the Peroxidase-like activity of carbon dots

Adenosine triphosphate (ATP) is the main energy currency for cells and an important biomolecule involved in cellular reactions, whose abnormal levels are closely related to physical disease, thus it is extremely important to establish a convenient, fast and simple ATP monitoring method. Toward this end, we developed a facile method for colorimetric detection of ATP on the basis of the inhibiting effect of ATP on the peroxidase-like activity of carbon dots (CDs). The detection principle of this method was utilizing the peroxidase-like activity of CDs, which catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H₂O₂ to generate blue products. However, the introduction of ATP in the system can inhibit the generation of blue products, so ATP can be colorimetric detected. This method exhibited high sensitivity with a detection limit of 34 nM and a wide linear range (0.050-2.0 μM). The as-proposed colorimetric ATP sensor was capable of detecting ATP in real samples accurately.

Enzyme-Free Autocatalysis-Driven Feedback DNA Circuits for Amplified Aptasensing of Living Cells

Aptasensors with high specificity have emerged as powerful tools for understanding various biological processes, thus providing tremendous opportunities for clinical diagnosis and prognosis. However, their applications in intracellular molecular imaging are largely impeded due to the low anti-interference capacity in biological environments and the moderate sensitivity to targets. Herein, a robust enzyme-free autocatalysis-driven feedback DNA circuit is devised for amplified aptasensing, for example, adenosine triphosphate (ATP) and thrombin, with a significantly improved sensitivity in living cells. This initiator-replicated hybridization chain reaction (ID-HCR) circuit was acquired by integrating the HCR circuit with the DNAzyme biocatalysis. Also, the autocatalysis-driven aptasensor consists of a recognition element and an amplification element. The recognition unit can specifically identify ATP or thrombin via a versatile conformational transformation, resulting in the exposure of the initiator to the autocatalysis-driven circuit. The ID-HCR element integrates the charming self-assembly characteristics of the HCR and the remarkable catalytic cleavage capacity of DNAzyme for realizing the continuously self-sustained regeneration or replication of trigger strands and for achieving an exponential signal gain. The autocatalysis-driven aptasensor has been validated for quantitative analysis of ATP and thrombin in vitro and for monitoring the corresponding aptamer substrates with various expressions in live cells. More importantly, the autocatalysis-driven aptasensor, as a versatile amplification strategy, holds enormous potential for analysis of other less abundant biomarkers by changing only the recognition element of the system.

A Novel Electrochemical Aptasensor for the Ultrasensitive Detection of Adenosine Triphosphate Based on DNA-Templated Copolymers

Adenosine triphosphate (ATP) is a small but significant biological molecule that plays an important role in regulating cellular metabolism processes. Accurate and sensitive analytical techniques for detecting ATP are urgently needed. Herein, a new electrochemical aptasensor was designed in light of DNA-templated copolymers that parallel to the electrode for sensitive gauging of ATP. The ATP aptamer decorated by the electronic medium ferrocene can be regarded as a ″bridge″ connecting two DNA-templated copolymers. When ATP exists, because of the extraordinary binding selectivity of DNA-templated copolymers for target ATP, the rapid electron transfer of ferrocene was beneficial to the sensitive detection of target ATP. Specifically, our parallel DNA copolymers are more stable than upright DNA copolymers and have a faster signal transmission because of the close distance to the electrode; meanwhile, the nonspecific pollution is less. Consequently, the developed novel aptasensor exhibited a wide range of linear response toward ATP that was from 0.1 to 10 000 pM and high selectivity with a detection limit down to 11.5 fM. The electrochemical aptasensor has a broad application prospect in the detection of small biological molecules.

An "off-on" electrochemiluminescence biosensor coupled with strand displacement-powered 3D micromolecule walking nanomachine for ultrasensitive detection of adenosine triphosphate

A three-dimensional (3D) micromolecule walking nanomachine propelled by strand displacement was developed to establish a novel switching electrochemiluminescence (ECL) biosensor for ultrasensitive detection of adenosine triphosphate (ATP). Generally, walking nanomachines reported previously were limited to DNA walkers, while the proposed 3D walking nanomachine focused on the micromolecule walker. Firstly, TiO₂ and silver nanoparticles (Ag NPs) functionalized N-(4-aminobutyl)-N-(ethylisoluminol) (Ag-ABEI) were deposited onto the electrode surface to offer an enhanced ECL signal, resulting from the double catalytic effect of TiO₂ and Ag NPs for H₂O₂. Following, dopamine (DA)-labeled DNA duplex probes (S1/S2-DA) immobilized onto the modified electrode cut down the original ECL signal due to the quenching of DA toward ABEI (signal-off). Target ATP walker moved along the 3D DNA track, simultaneously releasing numerous DNA3, which was applied to displace S2-DA, resulting in the quenched ECL intensity recovery (signal-on). As a result, the biosensor showed a low limit of detection down to 0.5 nM (S/N = 3) and was successfully employed to determine ATP in human serum samples. Thus, the established biosensing strategy holds great potential for biochemical studies and clinical diagnosis.

Determination of flavor-potentiating compounds in different Italian tomato varieties

Umami taste, known as appetizing sensation, is mainly imparted by monosodium glutamate (MSG, the first identified umami factor) in synergistic combination with some 5' ribonucleotides such as inosine 5'-monophosphate, IMP, guanosine 5'-monophosphate, GMP, and adenosine 5'-monophoshate, AMP. The level of free glutamic acid in tomatoes is higher than in other vegetables or fruits and increases with ripening and industrial processing. In addition, due to the presence of bioactive metabolites, tomatoes and tomato-based products are among the most consumed healthy food items. The levels of the major umami compounds of tomato, that is, glutamate and 5'-ribonucleotides (GMP and AMP) were assessed in different parts (skin, outer flesh, and inner pulp) of known tomato varieties from southern Italy: San Marzano Originale, San Marzano 245, Black Tomato, Corbarino Corbara, Corbarino Nocera, and Superpomodoro (tomato hybrid). Such varieties were also investigated for their antioxidant properties through DMPD, DPPH, and ABTS assays, with San Marzano Originale showing the highest antioxidant power both in lipophilic and methanolic fractions. The concentration of umami compounds in tomato differs with the part of the fruit analyzed and is greatly dependent on the variety, being Corbarino Nocera the cultivar richest in glutamate and Superpomodoro in ribonucleotides. As for nutritional aspect, results confirm the great nutraceutical feature of San Marzano tomato, the most known variety used in industrial processes. PRACTICAL APPLICATIONS: This study was planned to develop a method to quantify the major umami compounds that strongly influence the organoleptic properties of many different tomato varieties. It is known that the sensory quality of fruits and vegetables is an important factor in consumer's choice. The analytical methods described here enabled the evaluation of the glutamate and 5'-ribonucleotides contents in six selected varieties of tomato from Campania region, and can be easily used to determine the sensory profile of commercial varieties, for example, those perceived as not very tasteful by consumers.

An ATP responsive fluorescent supramolecular assembly based on a polyelectrolyte and an AIE active tetraphenylethylene derivative

Aggregation induced emission (AIE) active probes have attracted enormous attention due to their wide-spread and ever increasing number of applications in the sensing of chemically and biologically important molecules. AIE probes undergo drastic modulation in their photophysical features from a monomeric to aggregated state. In the current work, we report the aggregation of tetra-anionic Su-TPE (AIE active probe) in the presence of a cationic polyelectrolyte, poly(allylaminehydrochloride) (PAH). A supramolecular assembly is formed by the electrostatic interaction between cationic PAH and anionic Su-TPE molecules, which leads to drastic modulations in the spectral features of anionic Su-TPE upon addition of cationic PAH. The Su-TPE-PAH aggregate assembly has been investigated using various photophysical techniques, such as, ground-state absorption, steady-state and time-resolved emission spectroscopic techniques along with 1H NMR measurements. The Su-TPE-PAH aggregate assembly is found to be responsive towards the ionic strength of the medium and temperature which results in drastic modulations of the spectral features of the emissive supramolecular aggregate assembly. Finally, the specific recognition of an important bioanalyte, ATP, has been achieved using the formed Su-TPE-PAH supramolecular aggregate assembly as a sensing platform which displays good selectivity and high sensitivity towards ATP. Importantly, the developed sensor platform could also function in the human serum matrix, hence, demonstrating the potential of the established sensor platform for real-life applications in near future.

A nanoprobe based on molybdenum disulfide nanosheets and silver nanoclusters for imaging and quantification of intracellular adenosine triphosphate

Adenosine triphosphate (ATP), as a high-energy phosphate compound that stores and releases energy in living cells, has an irreplaceable role in many physiological processes and maintenance of biological functions, and can be used as an indicator of many diseases. In this work, a composite nanoprobe, silver nanocluster (AgNC) @ molybdenum disulfide (MoS₂), was designed to achieve in situ fluorescence imaging and quantitative analysis of intracellular ATP in HeLa cells by fluorescence spectrometry and inductively coupled plasma mass spectrometry (ICP-MS). The probe was constructed based on the adsorption of DNA-AgNCs by MoS₂ nanosheets, and the DNA-AgNCs were prepared with the ATP aptamer as a template, whose fluorescence was initially quenched by MoS₂. When the probe was incubated into the cells, intracellular ATP recognized the aptamer sequence and caused the DNA-AgNCs to fall off the MoS₂ nanosheets, resulting in fluorescence recovery. Here, AgNCs not only acted as a fluorescence label for imaging, but also as an element tag for quantitative analysis of intracellular ATP with the detection of ¹⁰⁷Ag by ICP-MS. The ATP in HeLa cells detected by this method was 24.6 ± 1.7 nmol L^-1, which was in good agreement with the test result of the ATP test kit (20.4 ± 0.8 nmol L^-1). The proposed method has potential application in medical clinical diagnosis and evaluation of the body's metabolic level via fluorescence imaging and ICP-MS detection of intracellular ATP.

Fe3O4 NP@ZIF-8/MoS2 QD-based electrochemiluminescence with nanosurface energy transfer strategy for point-of-care determination of ATP

Herein, Fe₃O₄ NP@ZIF-8/MoS₂ QD-based electrochemiluminescence (ECL) biosensor with nanosurface energy transfer strategy was successfully developed for point-of-care determination of ATP. With the porous structure and poor electron transfer ability, Fe₃O₄ NP@ZIF-8 complex was first used as an excellent catalyst in ECL. The complex catalyzed the coreactant for more free radicals and hindered the quenching effect of Fe₃O₄ nanoparticles (NPs) on quantum dots (QDs). In ECL-nanosurface energy transfer (NSET) system, through the specific binding of complementary DNA linked to MoS₂ QDs (QDs-cDNA) and aptamer linked to Au NPs, interaction between the point dipole of MoS₂ QDs and the collective dipoles of Au NPs quenched ECL signal. When ATP was captured by aptamer, the ECL-NSET system was taken apart, which resulted in the recovery of ECL signal. Moreover, changes of the ECL imaging can be captured by a smartphone, which enabled point-of-care determination of ATP from 0.05 nmol L^-1 to 200 nmol L^-1 with LOD of 0.015 nmol L^-1. With superior specificity and stability, the sensing system showed significant potential about the application of catalysts coated with ZIF and NSET in point-of-care ECL determination.

Hydroxyapatite-embedded monolithic column for selective on-line solid-phase extraction of adenosine triphosphate and its phosphorylated metabolites

A novel hydroxyapatite-embedded monolithic column has been facilely prepared in a stainless-steel column with inner diameter of 2.1 mm by the strong adhesion of urea-formaldehyde (UF) resin and exploited as a sorbent for selective on-line solid-phase extraction (on-line SPE) of adenosine triphosphate and its phosphorylated metabolites. The composition for this preparation, including the amount of hydroxyapatite nanopowders and the porogen were investigated to obtain a suitable monolith with large surface area and satisfactory permeability. Owing to anion exchange interaction of hydroxyapatite and hydrophilic interaction of UF monolithic matrix, the prepared monolith showed good extraction efficiency and selectivity towards these phosphorylated analytes. Several parameters for on-line SPE, including ACN percentage in the sampling solution, collection time span, salt concentration of the eluent, sampling and elution flow rate, were optimized with respect to the extraction efficiencies of the target compounds. Under the optimized conditions, the LODs of the analytes were in the range of 0.01-0.04 μg/g, the recoveries in the spiked samples ranged from 78.3%-92.5% with RSDs <4.7%. Due to the excellent extraction ability towards phosphorylated compounds in practical samples, a simple on-line SPE-HPLC method using hydroxyapatite-embedded monolith as sorbent has been proposed for monitoring freshness of grass carp.

A label-free hairpin aptamer probe for colorimetric detection of adenosine triphosphate based on the anti-aggregation of gold nanoparticles

A facile and rapid colorimetric approach was described for selective and sensitive determination of adenosine triphosphate (ATP) based on a hairpin aptamer probe and the anti-aggregation of AuNPs. Poly(diallyldimethylammonium chloride) (PDDA) can induce the aggregation of AuNPs due to the electrostatic interaction causing a red to blue color change. Upon the addition of ATP, aptamer-based hairpin probe is opened and releases flexible ssDNA ends. The released flexible ssDNA ends can interact with PDDA and prevent PDDA-induced AuNPs aggregation. Thus, a visible color change from blue to red and a decrease in the absorption ratio (A₆₁₀/A₅₂₀) are observed. Under the optimal conditions, the hairpin aptamer-based colorimetric assay exhibits high sensibility and selectivity for the detection of ATP with a detection limit of 1.7nM. Moreover, this assay is successfully used in the rapid determination of ATP in spiked human serum samples with good recoveries in the range of 102.88 to 104.07%.

New Strategy for Ultrasensitive Aptasensor Fabrication: D-A-D Constitution as a Charge Transfer Platform and Recognition Element

Over the past decade, various sensing systems based on aptamers have attracted a great deal of studies directed at designing highly selective biosensors. In this paper, we described a new-style electrochemical aptamer sensor (aptasensor) via a donor-acceptor link substrate, which was characterized by electrochemical methods and other helpful characterization instruments. Molecules with D-A-D configuration always undergo an intrinsic signal amplification due to the elongation of the π-electron conjugation. Triphenylamine, a peripheral electron donor, has excellent hole-transport property and is able to assemble on the surface of glassy carbon electrode by π-π stacking interaction. To further improve the performance of the adenosine triphosphate (ATP) sensor, we chose diphenylfumaronitrile-containing electron-withdrawing group as the central core to promote charge transfer, which can also efficiently combine with aptamers by multihydrogen bond function. Surprisingly, the sensing platform showed a wide liner range from 0.1 pM to 100 nM, with a detection limit of 0.018 pM. We examined the ATP in human serum sample, indicating that the novel aptasensor based on D-A-D conjugated polymer holds great possibility for practical detection of ATP. Moreover, it is foreseeable that the conjugated polymers of the D-A structure will have promising application in the preparation of biosensors.

A label-free fluorometric aptasensor for adenosine triphosphate (ATP) detection based on aggregation-induced emission probe

Based on Aggregation-Induced Emission (AIE), the development of a label-free, simple and sensitive fluorometric aptasensor for adenosine triphosphate (ATP) detection is described. With ATP present, the aptamers will combine with ATP and the conformation of the aptamer will switch from a random coil to an antiparallel G-quadruplex, which impedes the digestion by exonuclease I (Exo I). Addition of 4,4 -(1E,1E)-2,2-(anthracene-9,10-diyl) bis (ethene-2,1-diyl) bis (N,N, N-trimethyl-benzenaminium iodide) (DSAI) into the solution will cause aggregation of DSAI on the surface of the aptamer/ATP complex and consequently give rise to strong emission. Additionally, a good linear relationship was observed under optimized conditions between the fluorescence intensities and the logarithm of ATP concentrations (R² = 0.9908). The established aptamer sensor was highly sensitive and exhibited a low limit of detection of 32.8 nM, with superior specificity for ATP. It was also used in the quantification of ATP levels in human serum samples and demonstrated satisfactory recoveries in the scope of 93.2%-107.6%. The cellular ATP assay results indicated that the developed method can be used for monitoring ATP concentrations in cell extracts without the interference of other substances in the cells. This method offers several advantages such as simplicity, rapidity, low cost and excellent selectivity, which make it hold great potential for the detection of ATP in bioanalytical and biological studies.

In Ovo Feeding of Creatine Pyruvate Increases the Glycolysis Pathway, Glucose Transporter Gene Expression, and AMPK Phosphorylation in Breast Muscle of Neonatal Broilers

This study aims to investigate in ovo feeding (IOF) of creatine pyruvate (CrPyr) on glucose metabolism, hormone concentration, and the 5'-AMP-activated protein kinase (AMPK) pathway in breast muscle of embryos and neonatal broilers. The three treatments were noninjected control, 0.75% NaCl treatment, and 12 mg CrPyr/egg treatment. The solution was injected on the 17.5 day of incubation. At hatch, 120 male broilers from each treatment were chosen for a 7 day feeding trial. Compared with other treatments, CrPyr treated broilers enhanced insulin and thyroxine levels in plasma, adenosine triphosphate (ATP) concentration, hexokinase and pyruvate kinase activities, glucose transporter protein mRNA expressions, as well as protein abundances of phosphor-liver kinase B1 and phosphor-AMPK in breast muscle at hatch. In conclusion, IOF of CrPyr improved the energy status, increased the gene expression of glucose transporter proteins, and facilitated glycolysis in breast muscle, which may be associated with the activated AMPK pathway.

An ''off-on'' phosphorescent aptasensor switch for the detection of ATP

An "off-on" phosphorescent aptasensor based on the 3-mercaptopropionic acid (MPA) capped Mn-doped ZnS quantum dots (MPA-Mn:ZnS QDs)/aptamer hybrid system was developed to detect adenosine triphosphate (ATP) in biological fluids. The phosphorescence of MPA-Mn:ZnS QDs was obviously quenched when ATP aptamer was added due to the aggregation induced effect. ATP aptamer, adsorbed on the surface of the phosphorescent MPA-Mn:ZnS QDs, has a high affinity for ATP. And then, with the addition of ATP, phosphorescence was gradually recovered because of the stronger special binding interaction between ATP and ATP aptamer than that between QDs and ATP aptamer. In this case, a high sensitivity and selectivity of phosphorescent aptasensor for the detection of ATP has constructed with a low detection limit of 0.9 nM and a wide linear range from 2 nM to 9 µM. What's more, the phosphorescent aptasensor does not require complex pretreatments and can effectively eliminate the interference from auto fluorescence and scattering light.

Fluorescence strategy for sensitive detection of adenosine triphosphate in terms of evaluating meat freshness

A novel simple, sensitive and reliable sensor based on S1 nuclease, FAM-labeled ssDNA (DNA-F) and graphene oxide (GO) was developed for detecting adenosine triphosphate (ATP) and evaluating the freshness of meat (beef) samples. With S1 nuclease as the cleaver of DNA-F and ATP as the inhibitor of S1 nuclease, the fluorescence of DNA-F could be obviously quenched by GO, which exhibits the fluorescence of system gradually decrease as the increasing ATP concentration. Under the optimal conditions, a linear correlation between the fluorescence and the ATP concentration from 20 μM to 3500 μM is obtained with a detection limit of 3.2 μM. Furthermore, the proposed ATP detection method was applied to the ATP detection in microorganisms in meat samples, which acquired the satisfying results, respectively.

Label-free and rapid detection of ATP based on structure switching of aptamers

In this work, an aptamer-based fluorescent strategy for label-free detection of ATP was developed by using Thioflavin T (ThT) as a fluorescence indicator, which can specifically bind with G-quadruplex DNAs to generate enhanced fluorescence intensity. In the absence of ATP, the folded structure of ATP aptamer allows the intercalation of ThT to produce strong fluorescence signal. However, upon ATP binding to the aptamer where ThT intercalated, the conformational change or distortion of the aptamer is large enough to cause much less intercalation of ThT and consequently drastic suppression of the fluorescence intensity. As such, the concentration of ATP could be identified very easily by observing fluorescence changes of this sensing system. This label-free assay could be accomplished very easily and quickly with a "mix-and-detect" detection method and exhibits high sensitivity to ATP with a detection limit of 33 nM in a wide range of 0.1-1000 μM. Furthermore, this proposed method is capable of detecting ATP in human serum and cell extracts. This method offers several advantages such as simplicity, rapidity, low cost, good stability and excellent selectivity, which make it hold great potential for the detection of ATP in bioanalytical and biological studies.

A G-quadruplex-based Label-free Fluorometric Aptasensor for Adenosine Triphosphate Detection

A G-quadruplex-based, label-free fluorescence assay was demonstrated for the detection of adenosine triphosphate (ATP). A double-stranded DNA (dsDNA), hybridized by ATP-aptamer and its complementary sequence, was employed as a substrate for ATP binding. SYBR Green I (SG I) was a fluorescent probe and exonuclease III (Exo III) was a nuclease to digest the dsDNA. Consequently, in the absence of ATP, the dsDNA was inset with SG I and was digested by Exo III, resulting in a low background signal. In the presence of ATP, the aptamer in dsDNA folded into a G-quadruplex structure that resisted the digestion of Exo III. SG I was inserted into the structure, showing high fluorescence. Owing to a decrease of the background noise, a high signal-to-noise ratio could be obtained. This sensor can detect ATP with a concentration ranging from 50 μM to 5 mM, and possesses a capacity for the sensitive determination of other targets.

A target responsive aptamer machine for label-free and sensitive non-enzymatic recycling amplification detection of ATP

Based on a new target-triggered aptamer molecular machine, a label-free and non-enzymatic target recycling amplification strategy for sensitive fluorescence detection of ATP in human serums is described. The presence of the target ATP together with the DNA fuel strand initiates the operation of the aptamer machine and leads to cyclic reuse of ATP and the release of many G-quadruplex sequences, which associate with a fluorescent dye to generate significantly amplified fluorescence signals to achieve sensitive detection of ATP.

Detection of adenosine triphosphate in HeLa cell using capillary electrophoresis-laser induced fluorescence detection based on aptamer and graphene oxide

A method for ATP quantification based on dye-labeled aptamer/graphene oxide (aptamer/GO) using capillary electrophoresis-laser induced fluorescence (CE-LIF) detecting technique has been established. In this method, the carboxyfluorescein (FAM)-labelled ATP aptamers were adsorbed onto the surface of GO, leading to the fluorescence quenching of FAM; after the incubation with a limited amount of ATP, stronger affinity between ATP aptamer and ATP resulted in the desorption of aptamers and the fluorescence restoration of FAM. Then, aptamer-ATP complex and excess of aptamer/GO and GO were separated and quantified by CE-LIF detection. It was shown that a linear relation was existing in the CE-LIF peak intensity of aptamer-ATP and ATP concentration in range of 10-700 μM, the regression equation was F=1.50+0.0470C(ATP) (R(2)=0.990), and the limit of detection was 1.28 μM (3S/N, n=5), which was one order magnitude lower than that of detection in solution by fluorescence method. The approach with excellent specificity and reproducibility has been successfully applied to detecting concentration of ATP in HeLa cell.

A novel label-free aptasensor based on target-induced structure switching of aptamer-functionalized mesoporous silica nanoparticles

A strategy for high-performance liquid chromatography detection of adenosine triphosphate was developed based on mesoporous silica nanoparticles functionalized with an aptamer as a cap.

Identification of the distribution of adenosine phosphates, nucleosides and nucleobases in royal jelly

Nucleotides, nucleosides and nucleobases play a greater role in the physiological activity of organisms which are highly present in royal jelly (RJ). The objective of the present study is to develop a HPLC method to simultaneous determine nucleotides, nucleosides and nucleobases in RJ and access them in fresh and commercial RJ samples. The LOD and LOQ were 12.2-99.6 μg/L and 40.8-289.4 μg/L, respectively with nearly 100.9% recoveries. Except uric acid, all other compounds were found in RJ samples. Significant difference in the average content of compounds in fresh (2682.93 mg/kg) and commercial samples (3152.78 mg/kg) were observed. AMP, adenosine and adenine were found predominant in all the samples. Significant higher levels of ATP, ADP and AMP was seen in fresh RJ samples, and IMP, uridine, guanosine, and thymidine was seen in commercial RJ samples. The investigated compounds can be used as indexes for assessment RJ freshness and quality.

Poly(glycidyl methacrylate-co-N-methylolacrylamide-co-ethylene dimethacrylate) monolith coupled to high-performance liquid chromatography for the determination of adenosine phosphates in royal jelly

A polymer monolith microextraction method coupled with high-performance liquid chromatography was developed for the determination of adenosine triphosphate, adenosine diphosphate, and adenosine monophosphate. The monolithic column was synthesized inside fused-silica capillaries using thermal initiation free-radical polymerization with glycidyl methacrylate as the monomer, ethylene dimethacrylate as the cross-linker, cyclohexanol, and 1-dodecanol as the porogen. N-Methylolacrylamide, an important hydrophilic monomer, was incorporated into the polymerization mixture to enhance the hydrophilicity of the poly(glycidyl methacrylate-co-ethylene dimethacrylate) column. The obtained poly(glycidyl methacrylate-co-N-methylolacrylamide-co-ethylene dimethacrylate) monolith was characterized by scanning electron microscopy, Fourier-transform infrared spectra, and X-ray photoelectron spectroscopy. Optimum conditions for the preconcentration and separation of the target adenosines were also investigated. Under the optimum conditions, we obtained acceptable linearities, low limits of detection, and good relative standard deviations. The developed polymer monolith microextraction with high-performance liquid chromatography method exhibited a good performance with recovery values in the range of 76.9-104.7% when applied to the determination of the adenosines in five royal jelly samples.

Target recycling amplification for label-free and sensitive colorimetric detection of adenosine triphosphate based on un-modified aptamers and DNAzymes

Based on target recycling amplification, the development of a new label-free, simple and sensitive colorimetric detection method for ATP by using un-modified aptamers and DNAzymes is described. The association of the model target molecules (ATP) with the corresponding aptamers of the dsDNA probes leads to the release of the G-quadruplex sequences. The ATP-bound aptamers can be further degraded by Exonuclease III to release ATP, which can again bind the aptamers of the dsDNA probes to initiate the target recycling amplification process. Due to this target recycling amplification, the amount of the released G-quadruplex sequences is significantly enhanced. Subsequently, these G-quadruplex sequences bind hemin to form numerous peroxidase mimicking DNAzymes, which cause substantially intensified color change of the probe solution for highly sensitive colorimetric detection of ATP down to the sub-nanomolar (0.33nM) level. Our method is highly selective toward ATP against other control molecules and can be performed in one single homogeneous solution, which makes our sensing approach hold great potential for sensitive colorimetric detection of other small molecules and proteins.

Target-induced structure switching of hairpin aptamers for label-free and sensitive fluorescent detection of ATP via exonuclease-catalyzed target recycling amplification

In this work, we described the development of a new label-free, simple and sensitive fluorescent ATP sensing platform based on exonuclease III (Exo III)-catalyzed target recycling (ECTR) amplification and SYBR Green I indicator. The hairpin aptamer probes underwent conformational structure switching and re-configuration in the presence of ATP, which led to catalytic cleavage of the re-configured aptamers by Exo III to release ATP and to initiate the ECTR process. Such ECTR process resulted in the digestion of a significant number of the hairpin aptamer probes, leading to much less intercalation of SYBR Green I to the hairpin stems and drastic suppression of the fluorescence emission for sensitive ATP detection down to the low nanomolar level. Due to the highly specific affinity bindings between aptamers and ATP, the developed method exhibited excellent selectivity toward ATP against other analogous molecules. Besides, our ATP sensing approach used un-modified aptamer probes and could be performed in a "mix-and-detect" fashion in homogenous solutions. All these distinct advantages of the developed method thus made it hold great potential for the development of simple and robust sensing strategies for the detection of other small molecules.

Glutathione-functionalized graphene quantum dots as selective fluorescent probes for phosphate-containing metabolites

Bright blue fluorescent glutathione-functionalized graphene quantum dots (GQDs@GSH) were prepared by a one-step pyrolysis method with a fluorescence quantum yield as high as 33.6%. Futhermore, the obtained GQDs@GSH can be used as a probe to estimate the ATP level in cell lysates and human blood serum.

Fast determination of adenosine 5'-triphosphate (ATP) and its catabolites in royal jelly using ultraperformance liquid chromatography

To obtain insight into the metabolic regulation of adenosine 5'-triphosphate (ATP) in royal jelly and to determine whether ATP and its catabolites can be used as objective parameters to evaluate the freshness and quality of royal jelly (RJ), a rapid ultraperformance liquid chromatography (UPLC) method has been developed for feasible separation and quantitation of ATP and its catabolites in RJ, namely, adenosine 5'-diphosphate (ADP), adenosine 5'-monophosphate (AMP), inosine monophosphate (IMP), inosine (HxR), and hypoxanthine (Hx). The analytes in the sample were extracted using 5% precooled perchloric acid. Chromatographic separation was performed on a Waters Acquity UPLC system with a Waters BEH Shield RP18 column and gradient elution based on a mixture of two solvents: solvent A, 50 mM phosphate buffer (pH 6.5); and solvent B, acetonitrile. The recoveries were in the range of 86.0-102.3% with RSD of no more than 3.6%. The correlation coefficients of six analytes were high (r(2) ≥ 0.9988) and within the test ranges. The limits of detection and quantification for the investigated compounds were lower, at 0.36-0.68 and 1.22-2.30 mg/kg, respectively. The overall intra- and interday RSDs were no more than 1.8%. The developed method was successfully applied to the analysis of the analytes in samples. The results showed that ATP in RJ sequentially degrades to ADP, AMP, IMP, HxR, and Hx during storage.

Fluorescence detection of adenosine triphosphate through an aptamer-molecular beacon multiple probe

An aptamer-molecular beacon (MB) multiple fluorescent probe for adenosine triphosphate (ATP) assay is proposed in this article. The ATP aptamer was used as a molecular recognition part, and an oligonucleotide (short strand, SS) partially complementary with the aptamer and an MB was used as the other part. In the presence of ATP, the aptamer bound with it, accompanied by the hybridization of MB and SS and the fluorescence recovering. Wherever there is only very weak fluorescence can be measured in the absence of ATP. Based on the relationship of recovering fluorescence and the concentration of ATP, a method for quantifying ATP has been developed. The fluorescence intensity was proportional to the concentration of ATP in the range of 10 to 500 nM with a detection limit of 0.1 nM. Moreover, this method was able to detect ATP with high selectivity in the presence of guanosine triphosphate (GTP), cytidine triphosphate (CTP), and uridine triphosphate (UTP). This method is proved to be simple with high sensitivity, selectivity, and specificity.

Analysis of coenzyme Q10 in bee pollen using online cleanup by accelerated solvent extraction and high performance liquid chromatography

A method for the determination of coenzyme Q10 in bee pollen has been developed applying an online cleanup of accelerated solvent extraction and using environmentally acceptable organic solvents. The extracted samples were analysed by high performance liquid chromatography with diode array detection. The optimised method employed 10 mL extraction cells, 1g sample size, absolute ethanol as extraction solvent, 80°C of extraction temperature, one extraction cycle, 5 min of static time, Cleanert Alumina-N as sorbent and 60% flush volume. The method was validated by means of an evaluation of the matrix effects, linearity, limit of detection (LOD) and quantification (LOQ), trueness, precision and stability. The assay was linear over the concentration range of 0.25-200mg/L and the LOD and LOQ were 0.16 and 0.35 mg/kg, respectively. The recoveries were above 90%. The inter- and intra-day precision was below 6.3%. The method has been successfully applied to the analysis of bee pollen samples. For 20 bee pollen products, the coenzyme Q10 content varied from not detectable to 192.8 mg/kg.

Hybrid field-assisted solid-liquid-solid dispersive extraction for the determination of organochlorine pesticides in tobacco with gas chromatography

A novel one-step sample preparation technique termed hybrid field-assisted solid-liquid-solid dispersive extraction (HF-SLSDE) was developed in this study. A simple glass system equipped with a condenser was designed as an extraction vessel. The HF-SLSDE technique was a three-phase dispersive extraction approach. Target analytes were extracted from the sample into the extraction solvent enhanced by the hybrid field. Meanwhile, the interfering components were adsorbed by dispersing sorbent. No cleanup step preceded chromatographic analysis. The efficiency of the HF-SLSDE approach was demonstrated in the determination of organochlorine pesticide (OCP) residues in tobacco with a gas chromatography-electron capture detector (GC-ECD). Various operation conditions were studied systematically. Low detection limits (0.3-1.6 μg/kg) and low quantification limits (1.0-4.5 μg/kg) were achieved under the optimized conditions. The recoveries of OCPs ranged from 70.2% to 118.2%, with relative standard deviations of <9.6%, except for the lowest fortification level. Because of the effect of the hybrid field, HF-SLSDE showed significant predominance compared with other extraction techniques. The dispersing sorbent with good cleanup ability used in this study was also found to be a microwave absorption medium, which could heat the nonpolar extraction solvent under microwave irradiation. Different microstructures of tobacco samples before and after extractions demonstrated the mechanism of HF-SLSDE was based on an explosion at the cell level. According to the results, HF-SLSDE was proved to be a simple and effective sample preparation method for the analysis of pesticide residues in solid samples and could potentially be extended to other nonpolar target analytes in a complex matrix.

Modes of metabolic compensation during mitochondrial disease using the Drosophila model of ATP6 dysfunction

Numerous mitochondrial DNA mutations cause mitochondrial encephalomyopathy: a collection of related diseases for which there exists no effective treatment. Mitochondrial encephalomyopathies are complex multisystem diseases that exhibit a relentless progression of severity, making them both difficult to treat and study. The pathogenic and compensatory metabolic changes that are associated with chronic mitochondrial dysfunction are not well understood. The Drosophila ATP6¹ mutant models human mitochondrial encephalomyopathy and allows the study of metabolic changes and compensation that occur throughout the lifetime of an affected animal. ATP6¹animals have a nearly complete loss of ATP synthase activity and an acute bioenergetic deficit when they are asymptomatic, but surprisingly we discovered no chronic bioenergetic deficit in these animals during their symptomatic period. Our data demonstrate dynamic metabolic compensatory mechanisms that sustain normal energy availability and activity despite chronic mitochondrial complex V dysfunction resulting from an endogenous mutation in the mitochondrial DNA. ATP6¹animals compensate for their loss of oxidative phosphorylation through increases in glycolytic flux, ketogenesis and Kreb's cycle activity early during pathogenesis. However, succinate dehydrogenase activity is reduced and mitochondrial supercomplex formation is severely disrupted contributing to the pathogenesis seen in ATP6¹ animals. These studies demonstrate the dynamic nature of metabolic compensatory mechanisms and emphasize the need for time course studies in tractable animal systems to elucidate disease pathogenesis and novel therapeutic avenues.