On the Preparation of Carbohydrate−Protein Conjugates Using the Traceless Staudinger Ligation

Effect of degree of substitution on the microphase separation and mechanical properties of cellooligosaccharide acetate-based elastomers

Thermoplastic elastomers (TPEs) have long been used in a wide range of industries. However, most existing TPEs are petroleum-derived polymers. To realize environmentally benign alternatives to conventional TPEs, cellulose acetate is a promising TPE hard segment because of its sufficient mechanical properties, availability from renewable sources, and biodegradability in natural environments. Because the degree of substitution (DS) of cellulose acetate governs a range of physical properties, it is a useful parameter for designing novel cellulose acetate-based TPEs. In this study, we synthesized cellulose acetate-based ABA-type triblock copolymers (AcCel_x-b-PDL-b-AcCel_x) containing a celloologosaccharide acetate hard A segment (AcCel_x, where x is the DS; x = 3.0, 2.6, and 2.3) and a poly(δ-decanolactone) (PDL) soft B segment. Small-angle X-ray scattering showed that decreasing the DS of AcCel_x-b-PDL-b-AcCel_x resulted in the formation of a more ordered microphase-separated structure. Owing to the microphase separation of the hard cellulosic and soft PDL segments, all the AcCel_x-b-PDL-b-AcCel_x samples exhibited elastomer-like properties. Moreover, the decrease in DS improved toughness and suppressed stress relaxation. Furthermore, preliminary biodegradation tests in an aqueous environment revealed that the decrease in DS endowed AcCel_x-b-PDL-b-AcCel_x with greater biodegradability potential. This work demonstrates the usefulness of cellulose acetate-based TPEs as next-generation sustainable materials.

Strategic Evaluation of the Traceless Staudinger Ligation for Radiolabeling with the Tricarbonyl Core

The traceless Staudinger ligation with its two variants is a powerful biorthogonal conjugation method not only for the connection of biomolecules, but also for the introduction of fluorescence- or radiolabels under mild reaction conditions. Herein, the strategic evaluation of the traceless Staudinger ligation for radiolabeling 99mTc using the fac-[Tc(CO)3]+ core is presented. A convenient and high-yielding three-step synthetic procedure of dipicolylamine-based phosphanols as ligands for the mild radiolabeling was developed. The labeling was accomplished using a tricarbonyl kit and a 99mTc-pertechnetate generator eluate showing 87% radiochemical conversion. The respective rhenium-based, non-radioactive reference compounds were synthesized using (Et4N)2[Re(CO)3Br3] as precursor. All products were analyzed by NMR, MS, and elemental analysis. Additional XRD analyses were performed.

Traceless Staudinger Ligation To Introduce Chemical Diversity on β-Lactamase Inhibitors of Second Generation

We explored the traceless Staudinger ligation for the functionalization of the C2 position of second generation β-lactamase inhibitors based on a diazabicyclooctane (DBO) scaffold. Our strategy is based on the synthesis of phosphine phenol esters and their ligation to an azido-containing precursor. Biological evaluation showed that this route provided access to a DBO that proved to be superior to commercial relebactam for inhibition of two of the five β-lactamases that were tested.

Bioorthogonal Reactions of Triarylphosphines and Related Analogues

Bioorthogonal phosphines were introduced in the context of the Staudinger ligation over 20 years ago. Since that time, phosphine probes have been used in myriad applications to tag azide-functionalized biomolecules. The Staudinger ligation also paved the way for the development of other phosphorus-based chemistries, many of which are widely employed in biological experiments. Several reviews have highlighted early achievements in the design and application of bioorthogonal phosphines. This review summarizes more recent advances in the field. We discuss innovations in classic Staudinger-like transformations that have enabled new biological pursuits. We also highlight relative newcomers to the bioorthogonal stage, including the cyclopropenone-phosphine ligation and the phospha-Michael reaction. The review concludes with chemoselective reactions involving phosphite and phosphonite ligations. For each transformation, we describe the overall mechanism and scope. We also showcase efforts to fine-tune the reagents for specific functions. We further describe recent applications of the chemistries in biological settings. Collectively, these examples underscore the versatility and breadth of bioorthogonal phosphine reagents.

Traceless Staudinger Ligation for Bioconjugation of RNA

Staudinger ligation is an attractive bioorthogonal reaction for use in studying biomolecules due to its capacity to form a native amide bond between a tag and a biomolecule. Here, we explore the traceless variant of the Staudinger ligation for 3'-end modification of oligoribonucleotides. The procedure involves (i) synthesis of phosphine-containing reactive groups, affinity purification tags, or photoactivatable benzophenone probe, (ii) synthesis of 2'-azido dinucleotides and 24-nt RNA, and (iii) traceless Staudinger ligation experiments. Each phosphine was characterized by ¹ H, ¹³ C, and ³¹ P NMR and high-resolution spectrometry and the functionalized nucleotides were characterized by LC/MS. © 2021 Wiley Periodicals LLC. Basic Protocol 1: Synthesis of phosphines Basic Protocol 2: Synthesis of dinucleotides 4 and 5 Basic Protocol 3: Synthesis of modified RNA 6 Basic Protocol 4: Traceless Staudinger reactions on a dinucleotide Basic Protocol 5: Traceless Staudinger reaction on RNA.

Discovery of Semi- and Fully-Synthetic Carbohydrate Vaccines Against Bacterial Infections Using a Medicinal Chemistry Approach

The glycocalyx, a thick layer of carbohydrates, surrounds the cell wall of most bacterial and parasitic pathogens. Recognition of these unique glycans by the human immune system results in destruction of the invaders. To elicit a protective immune response, polysaccharides either isolated from the bacterial cell surface or conjugated with a carrier protein, for T-cell help, are administered. Conjugate vaccines based on isolated carbohydrates currently protect millions of people against Streptococcus pneumoniae, Haemophilus influenzae type b, and Neisseria meningitides infections. Active pharmaceutical ingredients (APIs) are increasingly discovered by medicinal chemistry and synthetic in origin, rather than isolated from natural sources. Converting vaccines from biologicals to pharmaceuticals requires a fundamental understanding of how the human immune system recognizes carbohydrates and could now be realized. To illustrate the chemistry-based approach to vaccine discovery, I summarize efforts focusing on synthetic glycan-based medicinal chemistry to understand the mammalian antiglycan immune response and define glycan epitopes for novel synthetic glycoconjugate vaccines against Streptococcus pneumoniae, Clostridium difficile, Klebsiella pneumoniae, and other bacteria. The chemical tools described here help us gain fundamental insights into how the human system recognizes carbohydrates and drive the discovery of carbohydrate vaccines.

Glycoconjugations of Biomolecules by Chemical Methods

Bioconjugations under benign aqueous conditions have the most promise to covalently link carbohydrates onto chosen molecular and macromolecular scaffolds. Chemical methodologies relying on C-C and C-heteroatom bond formations are the methods of choice, coupled with the reaction conditions being under aqueous milieu. A number of methods, including metal-mediated, as well as metal-free azide-alkyne cyclo-addition, photocatalyzed thiol-ene reaction, amidation, reductive amination, disulfide bond formation, conjugate addition, nucleophilic addition to vinyl sulfones and vinyl sulfoxides, native chemical ligation, Staudinger ligation, olefin metathesis, and Suzuki-Miyaura cross coupling reactions have been developed, in efforts to conduct glycoconjugation of chosen molecular and biomolecular structures. Within these, many methods require pre-functionalization of the scaffolds, whereas methods that do not require such pre-functionalization continue to be few and far between. The compilation covers synthetic methodology development for carbohydrate conjugation onto biomolecular and biomacromolecular scaffolds. The importance of such glycoconjugations on the functional properties is also covered.

Design, synthesis, and cytotoxic activities of novel hybrids of parthenolide and thiazolidinedione via click chemistry

A series of novel parthenolide-thiazolidinedione hybrids have been synthesized via a click chemistry-mediated coupling between parthenolide and thiazolidinedione, and evaluated for their cytotoxic activities. The results indicated that all the hybrids showed moderate cytotoxic effects on human cancer cell lines, including human erythroleukemia cell line (HEL), prostate (PC3), and breast (MDA-MB-231) by MTT assay. In particular, compound VI-6 exhibited the best cytotoxic activities against the MDA-MB-231 cells with IC₅₀ value of 2.07 µM, which was about eight times more active than that of the original compound (PTL). These interesting results might be used to develop novel lead scaffolds for potential anticancer agents.

Towards microbe-targeted photosensitizers: Synthesis, characterization and in vitro photodynamic inactivation of the tuberculosis model pathogen M. smegmatis by porphyrin-peptide conjugates

Porphyrin-peptide conjugates have a breadth of potential applications, including use in photodynamic therapy, boron neutron capture therapy, as fluorescence imaging tags for tracking subcellular localization, as magnetic resonance imaging (MRI) positive-contrast reagents and as biomimetic catalysts. Here, we have explored three general routes to porphyrin-peptide conjugates using the Cu(I)-catalyzed Huisgen-Medal-Sharpless 1,3-dipolar cycloaddition of peptide-containing azides with a terminal alkyne-containing porphyrin, thereby generating porphyrin-peptide conjugates (PPCs) comprised of a cationic porphyrin coupled to short antimicrobial peptides. In addition to characterizing the PPCs using a variety of spectroscopic (UV-vis, [Formula: see text]H- and [Formula: see text]C-NMR) and mass spectrometric methods, we evaluated their efficacy as photosensitizers for the in vitro photodynamic inactivation of Mycobacterium smegmatis as a model for the pathogen Mycobacterium tuberculosis. Difficulties that needed to be overcome for the efficient synthesis of PPCs were the limited solubility of the quaternized pyridyl porphyrin in common solvents, undesired (de)metallation and transmetallation, and chromatographic purification. Photodynamic inactivation studies of a small library of PPCs against Mycobacterium smegmatis confirmed our hypothesis that the porphyrin-based photosensitizer maintains its ability to efficiently inactivate bacteria when conjugated to a small peptide by upwards of 5–6 log units (99.999[Formula: see text]%) using white light illumination (400–700 nm, 60 mW/cm[Formula: see text], 30 min). Further, hemolysis assays revealed the lack of toxicity of the PPCs against sheep blood at concentrations employed for in vitro photodynamic inactivation. Taken together, the results demonstrated the ability of PPCs to maintain their antimicrobial photodynamic inactivation efficacy when possessing a short cationic peptides for enabling the potential targeting of pathogens in vivo.

Isothiocyanate-Functionalized Mesoporous Silica Nanoparticles as Building Blocks for the Design of Nanovehicles with Optimized Drug Release Profile

A straightforward methodology for the synthesis of isothiocyanate-functionalized mesoporous silica nanoparticles (MSNs) by exposure of aminated MSNs to 1,1′-thiocarbonyldi-2(1H)-pyridone is reported. These nanoparticles are chemically stable, water tolerant, and readily react with primary amines without the formation of any by-product. This feature allows the easy modification of the surface of the nanoparticles for tuning their physical properties and the introduction of gatekeepers on the pore outlets. As a proof-of-concept, amino-isothiocyanate-functionalized MSNs have been used for the design of a nanocontainer able to release the drug Ataluren. The release profile of the drug can be easily fine-tuned with the careful choice of the capping amine.

Glycocluster Tetrahydroxamic Acids Exhibiting Unprecedented Inhibition of Pseudomonas aeruginosa Biofilms

Opportunistic Gram-negative Pseudomonas aeruginosa uses adhesins (e.g., LecA and LecB lectins, type VI pili and flagella) and iron to invade host cells with the formation of a biofilm, a thick barrier that protects bacteria from drugs and host immune system. Hindering iron uptake and disrupting adhesins' function could be a relevant antipseudomonal strategy. To test this hypothesis, we designed an iron-chelating glycocluster incorporating a tetrahydroxamic acid and α-l-fucose bearing linker to interfere with both iron uptake and the glycan recognition process involving the LecB lectin. Iron depletion led to increased production of the siderophore pyoverdine by P. aeruginosa to counteract the loss of iron uptake, and strong biofilm inhibition was observed not only with the α-l-fucocluster (72%), but also with its α-d-manno (84%), and α-d-gluco (92%) counterparts used as negative controls. This unprecedented finding suggests that both LecB and biofilm inhibition are closely related to the presence of hydroxamic acid groups.

Ligation Technologies for the Synthesis of Cyclic Peptides

Cyclic peptides have been attracting a lot of attention in recent decades, especially in the area of drug discovery, as more and more naturally occurring cyclic peptides with diverse biological activities have been discovered. Chemical synthesis of cyclic peptides is essential when studying their structure-activity relationships. Conventional peptide cyclization methods via direct coupling have inherent limitations, like the susceptibility to epimerization at the C-terminus, poor solubility of fully protected peptide precursors, and low yield caused by oligomerization. In this regard, chemoselective ligation-mediated cyclization methods have emerged as effective strategies for cyclic peptide synthesis. The toolbox for cyclic peptide synthesis has been expanded substantially in the past two decades, allowing more efficient synthesis of cyclic peptides with various scaffolds and modifications. This Review will explore different chemoselective ligation technologies used for cyclic peptide synthesis that generate both native and unnatural peptide linkages. The practical issues and limitations of different methods will be discussed. The advance in cyclic peptide synthesis will benefit the biological and medicinal study of cyclic peptides, an important class of macrocycles with potentials in numerous fields, notably in therapeutics.

RGD-Functionalized Nanofibers Increase Early GFAP Expression during Neural Differentiation of Mouse Embryonic Stem Cells

Stem cell differentiation toward a specific lineage is controlled by its microenvironment. Polymer scaffolds have long been investigated to provide microenvironment cues; however, synthetic polymers lack the specific signaling motifs necessary to direct cellular responses on their own. In this study, we fabricated random and aligned poly(ε-caprolactone) nanofiber substrates, surface-functionalized with RGD viastrain-promoted azide-alkyne cycloaddition, that were used to investigate the role of a covalently tethered bioactive peptide (RGD) and nanofiber orientation on neural differentiation of mouse embryonic stem cells. Gene and protein expression showed neural differentiation progression over 14 days, with similar expression on RGD random and aligned nanofibers for neurons and glia over time. The high levels of glial fibrillary acidic protein expression at early time points were indicative of neural progenitors, and occurred earlier than on controls or in previous reports. These results highlight the influence of RGD binding versus topography in differentiation.

Total Synthesis of Zwitterionic Tetrasaccharide Repeating Unit from Bacteroides fragilis ATCC 25285/NCTC 9343 Capsular Polysaccharide PS A1 with Alternating Charges on Adjacent Monosaccharides

The tetrasaccharide repeating unit of zwitterionic polysaccharide A1 (PS A1) from Bacteroides fragilis ATCC 25285/NCTC 9343 has been synthesized using a linear glycosylation approach. One key step includes an α(1,4)-stereoselective [2 + 1] glycosylation of a 2,4,6-trideoxy-2-acetamido-4-amino-d-Gal p (AAT) donor with a poorly reactive axial C4-OH disaccharide acceptor. Mild acid-mediated deacetylation and a challenging [3 + 1] glycosylation are also highlighted. The strategy is inclusive of a single-pot, three-step deprotection affording PS A1 with alternating charges on adjacent monosaccharide units.

Accelerated neural differentiation of mouse embryonic stem cells on aligned GYIGSR-functionalized nanofibers

Substrates for embryonic stem cell culture are typified by poorly defined xenogenic, whole proteins or cellular components that are difficult and expensive to generate, characterize, and recapitulate. Herein, the generation of well-defined scaffolds of Gly-Tyr-Ile-Gly-Ser-Arg (GYIGSR) peptide-functionalized poly(ε-caprolactone) (PCL) aligned nanofibers are used to accelerate the neural lineage commitment and differentiation of D3 mouse embryonic stem cells (mESCs). Gene expression trends and immunocytochemistry analysis were similar to laminin-coated glass, and indicated an earlier differentiation progression than D3 mESCs on laminin. Further, GYIGSR-functionalized nanofiber substrates yielded an increased gene expression of Sox1, a neural progenitor cell marker, and Tubb3, Cdh2, Syp, neuronal cell markers, at early time points. In addition, guidance of neurites was found to parallel the fiber direction. We demonstrate the fabrication of a well-defined, xeno-free functional nanofiber scaffold and demonstrates its use as a surrogate for xenogenic and complex matrixes currently used for the neural differentiation of stem cells ex vivo.

STATEMENT OF SIGNIFICANCE

In this paper, we report the use of GYIGSR-functionalized poly(ε-caprolactone) aligned nanofibers as a tool to accelerate the neural lineage commitment and differentiation of D3 mouse embryonic stem cells. The results indicate that functional nanofiber substrates promote faster differentiation than laminin coated substrates. The data suggest that aligned nanofibers and post-electrospinning surface modification with bioactive species can be combined to produce translationally relevant xeno-free substrates for stem cell therapy. Future development efforts are focused on additional bioactive species that are able to function as surrogates for other xenogenic factors found in differentiation media.

Synthesis and Assembly of Laccase-Polymer Giant Amphiphiles by Self-Catalyzed CuAAC Click Chemistry

Covalent coupling of hydrophobic polymers to the exterior of hydrophilic proteins would mediate unique macroscopic assembly of bioconjugates to generate amphiphilic superstructures as novel nanoreactors or biocompatible drug delivery systems. The main objective of this study was to develop a novel strategy for the synthesis of protein-polymer giant amphiphiles by the combination of copper-mediated living radical polymerization and azide-alkyne cycloaddition reaction (CuAAC). Azide-functionalized succinimidyl ester was first synthesized for the facile introduction of azide groups to proteins such as albumin from bovine serum (BSA) and laccase from Trametes versicolor. Alkyne-terminal polymers with varied hydrophobicity were synthesized by using commercial copper wire as the activators from a trimethylsilyl protected alkyne-functionalized initiator in DMSO under ambient temperature. The conjugation of alkyne-functionalized polymers to the azide-functionalized laccase could be conducted even without additional copper catalyst, which indicated a successful self-catalyzed CuAAC reaction. The synthesized amphiphiles were found to aggregate into spherical nanoparticles in water and showed strong relevance to the hydrophobicity of coupled polymers. The giant amphiphiles showed decreased enzyme activity yet better stability during storage after chemical modification and self-assembly. These findings will deepen our understanding on protein folding, macroscopic self-assembly, and support potential applications in bionanoreactor, enzyme immobilization, and water purification.

Site-Selective Functionalization of Flagellin by Steric Self-Protection: A Strategy To Facilitate Flagellin as a Self-Adjuvanting Carrier in Conjugate Vaccine

Flagellin (FliC) can act as a carrier protein in the preparation of conjugate vaccines to elicit a T-cell-dependent immune response and as an intrinsic adjuvant to activate the toll-like receptor 5 (TLR5) to enhance vaccine potency. To enable the use of FliC as a self-adjuvanting carrier, an effective method for site-selective modification (SSM) of pertinent amino-acid residues in the D2 and D3 domains of FliC is explored without excessive modification of the D0 and D1 domains, which are responsible for activating and binding with TLR5. In highly concentrated Na₂ SO₄ solution, FliC monomers form flagellar filaments, in which the D0 and D1 domains are situated inside the tubular structure. Thus, the lysine residues (K219, K224, K324, and K331) in the D2 and D3 domains of flagellin are selectively modified by a diazo-transfer reaction with imidazole-1-sulfonyl azide. The sites with azido modification are confirmed by MALDI-TOF-MS, ESI-TOF-MS, and LC-MS/MS analyses along with label-free quantitation. The azido-modified filament dissolves to give FliC monomers, which can conjugate with alkyne-hinged saccharides by the click reaction. Transmission electron microscopy imaging, dynamic light scattering measurements, and the secreted embryonic alkaline phosphatase reporter assay indicate that the modified FliC monomers retain the ability either to bind with TLR5 or to reassemble into filaments. Overall, this study establishes a feasible method for the SSM of FliC by steric self-protection of the D0 and D1 domains.

Simultaneous Imaging of Endogenous Survivin mRNA and On-Demand Drug Release in Live Cells by Using a Mesoporous Silica Nanoquencher

The design of multifunctional drug delivery systems capable of simultaneous target detection, imaging, and therapeutics in live mammalian cells is critical for biomedical research. In this study, by using mesoporous silica nanoparticles (MSNs) chemically modified with a small-molecule dark quencher, followed by sequential drug encapsulation, MSN capping with a dye-labeled antisense oligonucleotide, and bioorthogonal surface modification with cell-penetrating poly(disulfide)s, the authors have successfully developed the first mesoporous silica nanoquencher (qMSN), characterized by high drug-loading and endocytosis-independent cell uptake, which is able to quantitatively image endogenous survivin mRNA and release the loaded drug in a manner that depends on the survivin expression level in tumor cells. The authors further show that this novel drug delivery system may be used to minimize potential cytotoxicity encountered by many existing small-molecule drugs in cancer therapy.

Designing Peptide and Protein Modified Hydrogels: Selecting the Optimal Conjugation Strategy

Hydrogels are used in a wide variety of biomedical applications including tissue engineering, biomolecule delivery, cell delivery, and cell culture. These hydrogels are often designed with a specific biological function in mind, requiring the chemical incorporation of bioactive factors to either mimic extracellular matrix or to deliver a payload to diseased tissue. Appropriate synthetic techniques to ligate bioactive factors, such as peptides and proteins, onto hydrogels are critical in designing materials with biological function. Here, we outline strategies for peptide and protein immobilization. We specifically focus on click chemistry, enzymatic ligation, and affinity binding for transient immobilization. Protein modification strategies have shifted toward site-specific modification using unnatural amino acids and engineered site-selective amino acid sequences to preserve both activity and structure. The selection of appropriate protein immobilization strategies is vital to engineering functional hydrogels. We provide insight into chemistry that balances the need for facile reactions while maintaining protein bioactivity or desired release.

Bovine serum albumin coated nanoparticles for in vitro activated fluorescence

A fluorophore modified nanoparticle was developed that can only fluoresce when a specific environmental parameter interacts with the system. The model system consisted of an azide modified bovine serum albumin (azBSA) that had been covalently attached to an alkyne modified silicon phthalocyanine (alSiPc) derivative through a copper catalyzed azide/alkyne Huisgen cycloaddition (click reaction). The azBSA/alSiPc assembly was then clicked to a ca. 67 nm poly(propargyl acrylate) (PA) nanoparticle (PA/azBSA/alSiPc). The resulting particles did not exhibit any florescence when the alSiPc was excited. Incubating the particles at 37 °C for 30 min with a proteolytic enzyme (trypsin) degraded the linking BSA and resulted in the appearance of florescence that was attributed to a "free" silicon phthalocyanine. The PA/azBSA/alSiPc particles were incubated with human non-small cell lung cancer cells (A549) and the florescence of the initially quenched particles was achieved with cellular uptake.

Introducing Glycolinkers for the Functionalization of Cytotoxic Drugs and Applications in Antibody-Drug Conjugation Chemistry

Antibody-drug conjugates (ADCs) are promising alternatives to naked antibodies for selective drug-delivery applications and treatment of diseases such as cancer. Construction of ADCs relies upon site-selective, efficient and mild conjugation technologies. The choice of a chemical linker is especially important, as it affects the overall properties of the ADC. We envisioned that hydrophilic bifunctional chemical linkers based on carbohydrates would be a useful class of derivatization agents for the construction of linker-drug conjugates and ADCs. Herein we describe the synthesis of carbohydrate-based derivatization agents, glycolinker-drug conjugates featuring the tubulin inhibitor monomethyl auristatin E and an ADC based on an anti-EGFR antibody. In addition, an initial in vitro cytotoxicity evaluation of the individual components and the ADC is provided against EGFR-positive cancer cells.

Synthesis, morphology, and electrical memory application of oligosaccharide-based block copolymers with π-conjugated pyrene moieties and their supramolecules

Transistor memory applications of maltoheptaose-block-poly(1-pyrenylmethyl methacrylate), and their supramolecules with (4-pyridyl)-acceptor-(4-pyridyl).

Synthesis of the copper chelator TGTA and evaluation of its ability to protect biomolecules from copper induced degradation during copper catalyzed azide-alkyne bioconjugation reactions

One of the most successful bioconjugation strategies to date is the copper(I)-catalyzed cycloaddition reaction (CuAAC), however, the typically applied reaction conditions have been found to degrade sensitive biomolecules. Herein, we present a water soluble copper chelator which can be utilized to protect biomolecules from copper induced degradation.

Trigonal scaffolds for multivalent targeting of melanocortin receptors

Melanocortin receptors can be used as biomarkers to detect and possibly treat melanoma. To these ends, molecules bearing one, two, or three copies of the weakly binding ligand MSH(4) were attached to scaffolds based on phloroglucinol, tripropargylamine, and 1,4,7-triazacyclononane by means of the copper-assisted azide-alkyne cyclization. This synthetic design allows rapid assembly of multivalent molecules. The bioactivities of these compounds were evaluated using a competitive binding assay that employed human embryonic kidney cells engineered to overexpress the melanocortin 4 receptor. The divalent molecules exhibited 10- to 30-fold higher levels of inhibition when compared to the corresponding monovalent molecules, consistent with divalent binding. The trivalent molecules were only statistically (∼2-fold) better than the divalent molecules, still consistent with divalent binding but inconsistent with trivalent binding. Possible reasons for these behaviors and planned refinements of the multivalent constructs targeting melanocortin receptors based on these scaffolds are discussed.

Azide-alkyne cycloaddition for universal post-synthetic modifications of nucleic acids and effective synthesis of bioactive nucleic acid conjugates

The regioselective post-synthetic modifications of nucleic acids are essential to studies of these molecules for science and applications. Here we report a facile universal approach by harnessing versatile phosphoramidation reactions to regioselectively incorporate alkynyl/azido groups into post-synthetic nucleic acids primed with phosphate at the 5' termini. With and without the presence of copper, the modified nucleic acids were subjected to azide-alkyne cycloaddition to afford various nucleic acid conjugates including a peptide-oligonucleotide conjugate (POC) with high yield. The POC was inoculated with human A549 cells and demonstrated excellent cell-penetrating ability despite cell deformation caused by a small amount of residual copper chelated to the POC. The combination of phosphoramidation and azide-alkyne cycloaddition reactions thus provides a universal regioselective strategy to post-synthetically modify nucleic acids. This study also explicated the toxicity of residual copper in synthesized bioconjugates destined for biological systems.

A clickable and photocleavable lipid analogue for cell membrane delivery and release

For drug delivery purposes, the ability to conveniently attach a targeting moiety that will deliver drugs to cells and then enable controlled release of the active molecule after localization is desirable. Toward this end, we designed and synthesized clickable and photocleavable lipid analogue 1 to maximize the efficiency of bioconjugation and triggered release. This compound contains a dibenzocyclooctyne group for bioorthogonal derivatization linked via a photocleavable 2-nitrobenzyl moiety at the headgroup of a synthetic lipid backbone for targeting to cell membranes. To assess delivery and release using this system, we report fluorescence-based assays for liposomal modification and photocleavage in solution as well as through surface immobilization to demonstrate successful liposome functionalization and photoinduced release. In addition, fluorophore delivery to and release from live cells was confirmed and characterized using fluorescence microscopy and flow cytometry analysis in which 1 was delivered to cells, derivatized, and photocleaved. Finally, drug delivery studies were performed using an azide-tagged analogue of camptothecin, a potent anticancer drug that is challenging to deliver due to poor solubility. In this case, the ester attachment of the azide tag acted as a caging group for release by intracellular esterases rather than through photocleavage. This resulted in a dose-dependent response in the presence of liposomes containing delivery agent 1, confirming the ability of this compound to stimulate delivery to the cytoplasm of cells.

Development of a time-resolved fluorescence probe for evaluation of competitive binding to the cholecystokinin 2 receptor

The synthesis, characterization, and use of Eu-DTPA-PEGO-Trp-Nle-Asp-Phe-NH2 (Eu-DTPA-PEGO-CCK4), a luminescent probe targeted to cholecystokinin 2 receptor (CCK2R, aka CCKBR), are described. The probe was prepared by solid phase synthesis. A Kd value of 17±2nM was determined by means of saturation binding assays using HEK-293 cells that overexpress CCK2R. The probe was then used in competitive binding assays against Ac-CCK4 and three new trivalent CCK4 compounds. Repeatable and reproducible binding assay results were obtained. Given its ease of synthesis, purification, receptor binding properties, and utility in competitive binding assays, Eu-DTPA-PEGO-CCK4 could become a standard tool for high-throughput screening of compounds in development targeted to cholecystokinin receptors.

Formation of nanoparticles by cooperative inclusion between (S)-camptothecin-modified dextrans and β-cyclodextrin polymers

Novel (S)-camptothecin–dextran polymers were obtained by “click” grafting of azide-modified (S)-camptothecin and alkyne-modified dextrans. Two series based on 10 kDa and 70 kDa dextrans were prepared with a degree of substitution of (S)-camptothecin between 3.1 and 10.2%. The binding properties with β-cyclodextrin and β-cyclodextrin polymers were measured by isothermal titration calorimetry and fluorescence spectroscopy, showing no binding with β-cyclodextrin but high binding with β-cyclodextrin polymers. In aqueous solution nanoparticles were formed from association between the (S)-camptothecin–dextran polymers and the β-cyclodextrin polymers.

Near-infrared tunable bacteriochlorins equipped for bioorthogonal labeling

Nine new near-infrared absorbing (729–820 nm) synthetic bacteriochlorins are equipped with one of four reactive groups for bioorthogonal conjugation.

Glyconanoparticles for the plasmonic detection and discrimination between human and avian influenza virus

A plasmonic bioassay for the specific detection of human influenza virus has been developed based on gold nanoparticles functionalised with a designed and synthesised thiolated trivalent α2,6-thio-linked sialic acid derivative. The glyconanoparticles consist of the thiolated trivalent α2,6-thio-linked sialic acid derivative and a thiolated polyethylene glycol (PEG) derivative self-assembled onto the gold surface. Varying ratios of the trivalent α2,6-thio-linked sialic acid ligand and the PEG ligand were used; a ratio of 25:75 was found to be optimum for the detection of human influenza virus X31 (H3N2). In the presence of the influenza virus a solution of the glyconanoparticles aggregate following the binding of the trivalent α2,6-thio-linked sialic acid ligand to the haemagglutinin on the surface of the virus. The aggregation of the glycoparticles with the influenza virus induces a colour change of the solution within 30 min. Non-purified influenza virus in allantoic fluid was successfully detected using the functionalised glyconanoparticles. A comparison between the trivalent and a monovalent α2,6-thio-linked sialic acid functionalised nanoparticles confirmed that more rapid results, with greater sensitivity, were achieved using the trivalent ligand for the detection of the X31 virus. Importantly, the glyconanoparticles were able to discriminate between human (α2,6 binding) and avian (α2,3 binding) RG14 (H5N1) influenza virus highlighting the binding specificity of the trivalent α2,6-thio-linked sialic acid ligand.

Solid phase click ligation for the synthesis of very long oligonucleotides

Oligonucleotides have been ligated efficiently on solid-phase using CuAAC and SPAAC chemistry to produce up to 186-mer triazole linked DNA products. Multiple sequential ligation reactions can be carried out by using a masked azide approach. This work suggests a novel modular approach to the synthesis of large complex oligonucleotide analogues.

Cellular delivery and photochemical activation of antisense agents through a nucleobase caging strategy

Antisense oligonucleotides are powerful tools to regulate gene expression in cells and model organisms. However, a transfection or microinjection is typically needed for efficient delivery of the antisense agent. We report the conjugation of multiple HIV TAT peptides to a hairpin-protected antisense agent through a light-cleavable nucleobase caging group. This conjugation allows for the facile delivery of the antisense agent without a transfection reagent, and photochemical activation offers precise control over gene expression. The developed approach is highly modular, as demonstrated by the conjugation of folic acid to the caged antisense agent. This enabled targeted cell delivery through cell-surface folate receptors followed by photochemical triggering of antisense activity. Importantly, the presented strategy delivers native oligonucleotides after light-activation, devoid of any delivery functionalities or modifications that could otherwise impair their antisense activity.

ADIBO-based "click" chemistry for diagnostic peptide micro-array fabrication: physicochemical and assay characteristics

Several azide-derivatized and fluorescently-labeled peptides were immobilized on azadibenzocyclooctyne (ADIBO)-activated slide surfaces via a strain-promoted alkyne-azide cycloaddition (SPAAC) reaction revealing excellent immobilization kinetics, good spot homogeneities and reproducible fluorescence signal intensities. A myc-peptide micro-array immunoassay showed an antibody limit-of-detection (LOD) superior to a microtiter plate-based ELISA. Bovine serum albumin (BSA) and dextran covalently attached via “click” chemistry more efficiently reduced non-specific binding (NSB) of fluorescently-labeled IgG to the microarray surface in comparison to immobilized hexanoic acid and various types of polyethylene glycol (PEG) derivatives. Confirmation of these findings via further studies with other proteins and serum components could open up new possibilities for human sample and microarray platform-based molecular diagnostic tests.

Synthesis and characterization of time-resolved fluorescence probes for evaluation of competitive binding to melanocortin receptors

Probes for use in time-resolved fluorescence competitive binding assays at melanocortin receptors based on the parental ligands MSH(4), MSH(7), and NDP-α-MSH were prepared by solid phase synthesis methods, purified, and characterized. The saturation binding of these probes was studied using HEK-293 cells engineered to overexpress the human melanocortin 4 receptor (hMC4R) as well as the human cholecystokinin 2 receptor (hCCK2R). The ratios of non-specific binding to total binding approached unity at high concentrations for each probe. At low probe concentrations, receptor-mediated binding and uptake was discernable, and so probe concentrations were kept as low as possible in determining Kd values. The Eu-DTPA-PEGO-MSH(4) probe exhibited low specific binding relative to non-specific binding, even at low nanomolar concentrations, and was deemed unsuitable for use in competition binding assays. The Eu-DTPA-PEGO probes based on MSH(7) and NDP-α-MSH exhibited Kd values of 27±3.9nM and 4.2±0.48nM, respectively, for binding with hMC4R. These probes were employed in competitive binding assays to characterize the interactions of hMC4R with monovalent and divalent MSH(4), MSH(7), and NDP-α-MSH constructs derived from squalene. Results from assays with both probes reflected only statistical enhancements, suggesting improper ligand spacing on the squalene scaffold for the divalent constructs. The Ki values from competitive binding assays that employed the MSH(7)-based probe were generally lower than the Ki values obtained when the probe based on NDP-α-MSH was employed, which is consistent with the greater potency of the latter probe. The probe based on MSH(7) was also competed with monovalent, divalent, and trivalent MSH(4) constructs that previously demonstrated multivalent binding in competitive binding assays against a variant of the probe based on NDP-α-MSH. Results from these assays confirm multivalent binding, but suggest a more modest increase in avidity for these MSH(4) constructs than was previously reported.

Acid-detoxified Inaba lipopolysaccharide (pmLPS) is a superior cholera conjugate vaccine immunogen than hydrazine-detoxified lipopolysaccharide and induces vibriocidal and protective antibodies

Worldwide, in endemic areas of cholera, the group most burdened with cholera is children. This is especially vexing as young children (2-5 years of age) do not respond as well, or for as long as adults do, to the current killed oral cholera vaccines (OCV). Conjugate vaccines based on the hapten-carrier paradigm have been developed for several bacterial pathogens that cause widespread and severe diseases in young children. We and others have studied different formulations of Vibrio cholerae (Vc) O1 lipopolysaccharide (LPS, a T-independent antigen) conjugates. Detoxified LPS is a central component of a LPS-based conjugate vaccine. pmLPS, which is detoxified by acid treatment, is a superior immunogen compared with hydrazine-detoxified LPS (DetAcLPS) that has altered lipid A acyl chains. The other feature of pmLPS is the ability to link carrier proteins to a core region of sugar. pmLPS readily induced vibriocidal antibodies following one intraperitoneal dose in a MPL-type adjuvant One dose of the pmLPS conjugate was suggestive of being protective; a booster resulted in protective antibodies for infant mice challenged with virulent cholera.

Preparation of functionalized alkynyl magnetic microspheres for the selective enrichment of cell glycoproteins based on click chemistry

Functionalized alkynyl polyvinyl alcohol magnetic microspheres (PVA MMs) were developed for the specific enrichment of sialic acid-rich glycoproteins by click chemistry. The capture capability for proteins was evaluated through a novel dual-labeled bovine serum albumin (BSA) that utilizes fluorescence resonance energy transfer (FRET). The PVA MM parameters, including the size and coverage of functionalized groups, were optimized by response surface methodology. The optimal parameters obtained were 1.25-6.31 μm in size and 48.53-73.05% in coverage. Then, the optimal PVA MMs were synthesized, and the morphology and surface chemical properties were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR). To capture glycoproteins from the cell surface, a bioorthogonal chemical method was applied to metabolically label them with an azide group. The functionalized alkynyl PVA MMs showed a high specificity and strong binding capability for glycoproteins through a [3 + 2] cycloaddition reaction. The results indicated that the functionalized alkynyl PVA MMs could be applied to the enrichment of cell glycoproteins, and the merits of the MMs suggested an attractive and potential way to facilitate glycoprotein research.

Click reactions in protein chemistry: from the preparation of semisynthetic enzymes to new click enzymes

Click-chemistry is an approach based on cycloaddition reactions which has been successfully used as a chemical approach for complex organic molecules and which has recently starred in a boom in the world of protein chemistry. The advantage of the use of this technique in protein chemistry is based on a very high and efficient chemoselectivity, which usually requires simple or no purification and is extremely rate-accelerated in aqueous media. The perspective discusses some of the most recent advances in the application of this reaction in selective enzyme surface modification for the creation of new semisynthetic enzymes (fluorescence labeled enzymes, peptide-enzyme conjugates, glycosylated enzymes), and interestingly, the recent design and creation of "click" enzymes.