Amphiphilic surface active triblock copolymers with mixed hydrophobic and hydrophilic side chains for tuned marine fouling-release properties

Surface Reconstruction of Silicone-Based Amphiphilic Polymers for Mitigating Marine Biofouling

Poly(dimethylsiloxane) (PDMS) coatings are considered to be environmentally friendly antifouling coatings. However, the presence of hydrophobic surfaces can enhance the adhesion rate of proteins, bacteria and microalgae, posing a challenge for biofouling removal. In this study, hydrophilic polymer chains were synthesised from methyl methacrylate (MMA), Poly(ethylene glycol) methyl ether methacrylate (PEG-MA) and 3-(trimethoxysilyl) propyl methacrylate (TPMA). The crosslinking reaction between TPMA and PDMS results in the formation of a silicone-based amphiphilic co-network with surface reconstruction properties. The hydrophilic and hydrophobic domains are covalently bonded by condensation reactions, while the hydrophilic polymers migrate under water to induce surface reconstruction and form hydrogen bonds with water molecules to form a dense hydrated layer. This design effectively mitigates the adhesion of proteins, bacteria, algae and other marine organisms to the coating. The antifouling performance of the coatings was evaluated by assessing their adhesion rates to proteins (BSA-FITC), bacteria (B. subtilis and P. ruthenica) and algae (P. tricornutum). The results show that the amphiphilic co-network coating (e.g., P-AM-15) exhibits excellent antifouling properties against protein, bacterial and microalgal fouling. Furthermore, an overall assessment of its antifouling performance and stability was conducted in the East China Sea from 16 May to 12 September 2023, which showed that this silicon-based amphiphilic co-network coating remained intact with almost no marine organisms adhering to it. This study provides a novel approach for the development of high-performance silicone-based antifouling coatings.

Amphiphilic Alginate-Based Layer-by-Layer Coatings Exhibiting Resistance against Nonspecific Protein Adsorption and Marine Biofouling

Amphiphilic coatings are promising materials for fouling-release applications, especially when their building blocks are inexpensive, biodegradable, and readily accessible polysaccharides. Here, amphiphilic polysaccharides were fabricated by coupling hydrophobic pentafluoropropylamine (PFPA) to carboxylate groups of hydrophilic alginic acid, a natural biopolymer with high water-binding capacity. Layer-by-layer (LbL) coatings comprising unmodified or amphiphilic alginic acid (AA*) and polyethylenimine (PEI) were assembled to explore how different PFPA contents affect their physicochemical properties, resistance against nonspecific adsorption (NSA) of proteins, and antifouling activity against marine bacteria (Cobetia marina) and diatoms (Navicula perminuta). The amphiphilic multilayers, characterized through spectroscopic ellipsometry, water contact angle goniometry, elemental analysis, AFM, XPS, and SPR spectroscopy, showed similar or even higher swelling in water and exhibited higher resistance toward NSA of proteins and microfouling marine organisms than multilayers without fluoroalkyl groups.

How Interfacial Properties Affect Adhesion: An Analysis from the Interactions between Microalgal Cells and Solid Substrates

Microalgal biofilm, a stable community of many algal cells attached to a solid substrate, plays a significant role in the efficient accumulation of renewable energy feedstocks, wastewater treatment, and carbon reduction. The adhesion tendency of microalgal cells on solid substrates is the basis for controlling the formation and development of microalgal biofilm. To promote the adhesion of microalgal cells on solid substrates, it is necessary to clarify which surface properties have to be changed in the most critical factors affecting the adhesion. However, there have been few systematic discussions on what surface properties influence the adhesion tendency of algal cells on solid substrates. In this study, the essential principle of microalgal cell adhesion onto solid substrates was explored from the perspective of the interaction energy between microalgal cells and solid substrates. The influence of surface properties between microalgal cells and solid substrates on interaction energies was discussed via extended Derjaguin-Landau-Verwey-Overbeek (eDLVO) theory and a sensitivity analysis. The results showed that surface properties, including surface potential (ξ) and surface free energy components, significantly affect the adhesion tendency of microalgal cells on different solid substrates. When the solid surface possesses positive charges (ξ > 0), reducing ξ or the electron donor components of the solid substrate (γ_s^-) is an effective measure to promote microalgal cell adhesion onto the solid substrate. When the solid surface possesses negative charges (ξ < 0), an increase in either γ_s^- or the absolute value of ξ should be avoided in the process of microalgae adhesion. Overall, this research provides a direction for the selection of solid substrates and a direction for surface modification to facilitate the adhesion tendency of microalgal cells on solid substrates under different scenarios.

Fluoropolymers in biomedical applications: state-of-the-art and future perspectives

Biomedical applications of fluoropolymers in gene delivery, protein delivery, drug delivery, ¹⁹F MRI, PDT, anti-fouling, anti-bacterial, cell culture, and tissue engineering.

Amphiphilic Marine Antifouling Coatings Based on a Hydrophilic Polyvinylpyrrolidone and Hydrophobic Fluorine-Silicon-Containing Block Copolymer

The development of environmentally friendly and highly efficient antifouling coatings is vastly desirable in the marine industry. Herein, we prepared a novel amphiphilic block copolymer that combined hydrophilic polyvinylpyrrolidone (PVP) with hydrophobic poly(1-(1H,1H,2H,2H-perfluorodecyloxy)-3-(3,6,9-trioxadecyloxy)-propan-2-yl acrylate) (PFA) and polydimethylsiloxane (PDMS). The amphiphilic copolymer (PVP-PFA-PDMS) was blended into a cross-linked PDMS matrix to form a set of controlled surface composition and surface-renewal coatings with efficient antifouling and fouling-release properties. These coatings incorporated the biofouling settlement resistance ability attributed to the hydrophilic PVP segments and the reduced adhesion strength attributed to the low surface energy of fluorine-silicon-containing segments. As expected, the coatings showed an excellent antifouling performance against bacteria and marine unicellular Navicula parva diatoms (98.1 and 98.5% of reduction, respectively) and fouling-release performance against pseudobarnacle adhesion (84.3% of reduction) compared to the pristine PDMS coating. Moreover, a higher-content PVP-based coatings presented higher ability to resist biofouling adhesion. The nontoxic antifouling coating developed in this paper hold the potential to be applied in a variety of marine industrial facilities.

Effects of crosslink density in zwitterionic hydrogel coatings on their antifouling performance and susceptibility to silt uptake

Hydrogel coatings effectively reduce the attachment of proteins and organisms in laboratory assays, in particular when made from zwitterionic monomers. In field experiments with multiple species and non-living material, such coatings suffer from adsorption of particulate matter. In this study, the zwitterionic monomer 3-[N-(2-methacryloyloxyethyl)-N,N-dimethylammonio] propanesulfonate (SPE) was copolymerized with increasing amounts of the photo-crosslinker benzophenon-4-yloxyethyl methacrylate (BPEMA) to systematically alter the density of crosslinks between the polymer chains. The effect of increasing crosslink density on the antifouling (AF) performance of the coatings was investigated in laboratory assays and fields tests. In both cases, the AF performance was improved by increasing the crosslinker content. The coatings reduced protein, diatom, and barnacle accumulation, and showed better resistance to biomass accumulation. The findings underline that the marine AF performance of hydrogel coatings does not only depend on the specific chemical structure of the polymers, but also on their physico-chemical properties such as rigidity and swelling.

Environmentally Friendly Marine Antifouling Coating Based on a Synergistic Strategy

The development of environmentally friendly and long-term marine antifouling coating remains a huge challenge in the maritime industry. For this purpose, we developed a novel and efficient antifouling coating based on a synergistic strategy, incorporating contact inhibition, fouling repelling, and antifouling properties. Results demonstrated that the coating could efficiently resist the adhesion of protein, bacteria, and Navicula diatoms. More importantly, marine field tests showed the coating could efficiently inhibit biofouling for at least 8 months. This approach paves a new way for the development of environmentally friendly and long-term antifouling coating.

Silicone-Based Fouling-Release Coatings for Marine Antifouling

Marine biofouling profoundly influences marine industries and activities. It slows the speed and increases the fuel consumption of ships, corrodes offshore platforms, and blocks seawater pipelines. The most effective and economical antifouling approach uses coatings. Fouling-release coatings (FRCs) with low surface free energy and high elasticity weakly adhere to marine organisms, so they can be readily removed by the water shear force. FRCs have attracted increasing interest because they are biocide-free and hence ecofriendly. However, traditional silicone-based FRCs have weak adhesion to substrates, low mechanical strength, and low fouling resistance, limiting their applications. In recent years, many attempts have been made to improve their mechanical properties and fouling resistance. This review deals with the progress in the construction of high-performance silicone-based fouling-release surfaces.

Hydrolyzable Additive-Based Silicone Elastomers: A New Approach for Antifouling Coatings

Fouling Release Coatings are marine antifouling coatings based on silicone elastomers. Contrary to commonly used biocide-based antifouling coatings, they do not release biocides into the marine environment, however, they suffer from poor antifouling efficacy during idle periods. To improve their antifouling performances in static conditions, various amounts of hydrolyzable polymers were incorporated within a silicone matrix. These hydrolyzable polymers were chosen for the well-known hydrolytic degradation mechanism of their main chain, e.g. poly(ε-caprolactone) (PCL), or of their ester pending groups, e.g. poly(bis(trimethylsilyloxy)methylsilyl methacrylate) (PMATM2). The degradation kinetics of such hydrolyzable silicone coatings were assessed by mass loss measurements during immersion in deionized water. Coatings containing PMATM2 exhibited a maximum mass loss after 12 weeks, whereas PCL-based coatings showed no significant mass loss after 24 weeks. Dynamic contact angle measurements revealed the modifications of the coatings surface chemistry with an amphiphilic behavior after water exposure. The attachment of macrofoulers on these coatings were evaluated by field tests in the Mediterranean Sea, demonstrating the short or long-term antifouling effect of these hydrolyzable polymers embedded in the silicone matrix. The settlement of A. amphitrite barnacles on the different coatings indicated inhospitable behaviors towards larval barnacles for coatings with at least 15 wt % of additives.

Fouling-Release Properties of Dendritic Polyglycerols against Marine Diatoms

Dendritic polyglycerols (PGs) were grafted onto surfaces using a ring-opening polymerization reaction, and the fouling-release properties against marine organisms were determined. The coatings were characterized by spectroscopic ellipsometry, contact angle goniometry, ATR-FTIR, and stability tests in different aqueous media. A high resistance toward the attachment of different proteins was found. The PG coatings with three different thicknesses were tested in a laboratory assay against the diatom Navicula incerta and in a field assay using a rotating disk. Under static conditions, the PG coatings did not inhibit the initial attachment of diatoms, but up to 94% of attached diatoms could be removed from the coatings after exposure to a shear stress of 19 Pa. Fouling release was found to be enhanced if the coatings were sufficiently thick. The excellent fouling-release properties were supported in dynamic field-immersion experiments in which the samples were continually exposed to a shear stress of 0.18 Pa.

Injectable Hydrogels for Cardiac Tissue Engineering

In light of the limited efficacy of current treatments for cardiac regeneration, tissue engineering approaches have been explored for their potential to provide mechanical support to injured cardiac tissues, deliver cardio-protective molecules, and improve cell-based therapeutic techniques. Injectable hydrogels are a particularly appealing system as they hold promise as a minimally invasive therapeutic approach. Moreover, injectable acellular alginate-based hydrogels have been tested clinically in patients with myocardial infarction (MI) and show preservation of the left ventricular (LV) indices and left ventricular ejection fraction (LVEF). This review provides an overview of recent developments that have occurred in the design and engineering of various injectable hydrogel systems for cardiac tissue engineering efforts, including a comparison of natural versus synthetic systems with emphasis on the ideal characteristics for biomimetic cardiac materials.

Facile Construction of Robust Multilayered PEG Films on Polydopamine-Coated Solid Substrates for Marine Antifouling Applications

We report an effective and versatile approach to control marine fouling on artificial surfaces based on specific chemical interactions found in marine mussels. The approach consists of mussel-inspired polydopamine coating, spin-coating-assisted deposition of poly(ethylene glycol) (PEG) catechols, and their cross-linking via catechol-Fe³⁺-catechol interactions. Using this approach, multilayered PEG films that were highly resistant to marine diatom adhesion were successfully constructed on various substrates, such as stainless steel, nylon, titanium oxide, and silicon oxide. We believe that our results will provide a basis for the construction of a marine antifouling agent that can be applied by a large variety of industries owing to its applicability to different types of substrates and stability under marine environments.

Injectable Carbon Nanotube-Functionalized Reverse Thermal Gel Promotes Cardiomyocytes Survival and Maturation

The ability of the adult heart to regenerate cardiomyocytes (CMs) lost after injury is limited, generating interest in developing efficient cell-based transplantation therapies. Rigid carbon nanotubes (CNTs) scaffolds have been used to improve CMs viability, proliferation, and maturation, but they require undesirable invasive surgeries for implantation. To overcome this limitation, we developed an injectable reverse thermal gel (RTG) functionalized with CNTs (RTG-CNT) that transitions from a solution at room temperature to a three-dimensional (3D) gel-based matrix shortly after reaching body temperature. Here we show experimental evidence that this 3D RTG-CNT system supports long-term CMs survival, promotes CMs alignment and proliferation, and improves CMs function when compared with traditional two-dimensional gelatin controls and 3D plain RTG system without CNTs. Therefore, our injectable RTG-CNT system could potentially be used as a minimally invasive tool for cardiac tissue engineering efforts.

Marine anti-biofouling efficacy of amphiphilic poly(coacrylate) grafted PDMSe: effect of graft molecular weight

There is currently strong motivation due to ecological concerns to develop effective anti-biofouling coatings that are environmentally benign, durable, and stable for use by the maritime industry. The antifouling (AF) and fouling-release (FR) efficacy of amphiphilic, charged copolymers composed of ~52% acrylamide, ~34% acrylic acid, and ~14% methyl acrylate grafted to poly(dimethyl siloxane) (PDMSe) surfaces were tested against zoospores of the green alga Ulva linza and the diatom Navicula incerta. The biofouling response to molecular weight variation was analyzed for grafts ranging from ~100 to 1,400 kg mol^-1, The amphiphilic coatings showed a marked improvement in the FR response, with a 55% increase in the percentage removal of diatoms and increased AF efficacy, with 92% reduction in initial attachment density of zoospores, compared to PDMSe controls. However, graft molecular weight, in the range tested, was statistically insignificant. Grafting copolymers to PDMSe embossed with the Sharklet™ microtopography did not produce enhanced AF efficacy.

Hybrid Hairy Janus Particles as Building Blocks for Antibiofouling Surfaces

Herein, we report a new strategy for the design of antifouling surfaces by using hybrid hairy Janus particles. The amphiphilic Janus particles possess either a spherical or a plateletlike shape and have core-shell structures with an inorganic core and hydrophilic/hydrophobic polymeric shells. Subsequently, these bifunctional Janus particles enable the fabrication of surfaces with modularity in chemical composition and final surface topography, which possess antifouling properties. The antifouling and fouling-release capability of the composite Janus particle-based surfaces is investigated using the marine biofilm-forming bacteria Cobetia marina. The Janus particle-based coatings are robust and significantly reduce bacterial retention under both static and dynamic conditions independent of the particle geometry. The plateletlike (kaolinite-based) Janus particles represent a scalable system for the rational design of antifouling coatings as well as their large-scale production and application in the future.

Olefinic Thermoplastic Elastomer Gels: Combining Polymer Crystallization and Microphase Separation in a Selective Solvent

Since selectively swollen thermoplastic elastomer gels (TPEGs) afford a wide range of beneficial properties that open new doors to developing elastomer-based technologies, we examine the unique structure-property behavior of TPEGs composed of olefinic block copolymers (OBCs) in this study. Unlike their styrenic counterparts typically possessing two chemically different blocks, this class of multiblock copolymers consists of linear polyethylene hard blocks and poly(ethylene-co-α-octene) soft blocks, in which case, microphase separation between the hard and the soft blocks is accompanied by crystallization of the hard blocks. Here, we prepare olefinic TPEGs (OTPEGs) through the incorporation of a primarily aliphatic oil that selectively swells the soft block and investigate the resultant morphological features through the use of polarized light microscopy and small-/wide-angle X-ray scattering. These features are correlated with thermal and mechanical property measurements from calorimetry, rheology, and extensiometry to elucidate the roles of crystallization and self-assembly on gel characteristics and establish useful structure-property relationships.

Effects of surface-active block copolymers with oxyethylene and fluoroalkyl side chains on the antifouling performance of silicone-based films

Block copolymers made from a poly(dimethyl siloxane) (Si) and a poly(meth)acrylate carrying oxyethylene (EG) or fluoroalkyl (AF) side chains were synthesized and incorporated as surface-active components into a silicone matrix to produce cross-linked films with different surface hydrophilicity/phobicity. Near-edge X-ray absorption fine structure (NEXAFS) studies showed that film surfaces containing Si-EG were largely populated by the siloxane, with the oxyethylene chains present only to a minor extent. In contrast, the fluorinated block was selectively segregated to the polymer-air interface in films containing Si-AF as probed by NEXAFS and X-ray photoelectron spectroscopy (XPS) analyses. Such differences in surface composition were reflected in the biological performance of the coatings. While the films with Si-EG showed a higher removal of both Ulva linza sporelings and Balanus amphitrite juveniles than the silicone control, those with Si-AF exhibited excellent antifouling properties, preventing the settlement of cyprids of B. amphitrite.

Facile Synthesis of a Phosphorylcholine-Based Zwitterionic Amphiphilic Copolymer for Anti-Biofouling Coatings

An antibiofouling polymer coating, combined with both zwitterionic and amphiphilic features, is engineered by a two-step modification of a commodity polymer. The surface properties of the resultant polymer coating can be easily tuned by varying the extent of cross-linking in the network. Higher antibiofouling efficiency was observed for these surfaces vs. an elastomeric polydimethylsiloxane standard (Sylgard 184) against the adsorption of biomacromolecules and a marine fouling organism (Ulva zoospores) has been demonstrated. This design establishes a platform for the achievement of functionalized amphiphilic zwitterionic copolymers from relatively inexpensive starting materials via simple chemical manipulations.

Versatile, tannic acid-mediated surface PEGylation for marine antifouling applications

In this study, we report a facile and versatile approach to the formation of marine antifouling surface coatings. The approach consists of a combined coating of polydopamine (pDA) and tannic acid (TA) and subsequent immobilization of polyethylene glycol (PEG) on solid substrates. TA coating of a pDA-coated surface was carried out using iron(III) coordination chemistry, and PEG was immobilized on the TA-coated surface via hydrogen bond formation. Stainless steel and nylon were successfully modified by this approach, and the resulting substrates were used for marine antifouling applications, in which diatom adhesion was significantly inhibited. Advantageously, this approach allowed marine antifouling coatings to be prepared by a simple immersion process under environmentally friendly conditions.

Perfluoropolyether/poly(ethylene glycol) triblock copolymers with controllable self-assembly behaviour for highly efficient anti-bacterial materials

A series of perfluoropolyether/poly(ethylene glycol) (PFPE/PEG) triblock copolymers PEG/PFPE/PEG (P1–P3) and PFPE/PEG/PFPE (P4–P5) were prepared via thiol–ene click reaction in high yields.

Antifouling, high-flux nanofiltration membranes enabled by dual functional polydopamine

A facile method for fabricating antifouling and high-flux nanofiltration (NF) membranes was developed based on bioinspired polydopamine (PDA). Polyethersulfone (PES) ultrafiltration membrane as the support was first deposited a thin PDA layer and then chemically modified by a new kind of fluorinated polyamine via Michael addition reaction between fluorinated polyamine and quinone groups of PDA. PDA coating significantly reduced the pore sizes of the PES support membrane and endowed the NF membrane with high separation performance (flux about 46.1 L/(m(2) h) under 0.1 MPa, molecular weight cutoff of about 780 Da). The grafted fluorinated polyamine on the PDA layer could form low free energy microdomains to impede the accumulation/coalescence of foulants and lower the adhesion force between foulants and the membrane, rendering the membrane surface with prominent fouling-release property. When foulant solutions (including bovine serum albumin, oil and humic acid) were filtered, the resultant NF membrane exhibited excellent antifouling properties (the minimal value of total flux decline ratio was ∼8.9%, and the flux recovery ratio reached 98.6%). It is also found that the structural stability of the NF membrane could be significantly enhanced due to the covalent bond and other intermolecular interactions between the PDA layer and the PES support.

Amphiphilic triblock copolymers with PEGylated hydrocarbon structures as environmentally friendly marine antifouling and fouling-release coatings

The ideal marine antifouling (AF)/fouling-release (FR) coating should be non-toxic, while effectively either resisting the attachment of marine organisms (AF) or significantly reducing their strength of attachment (FR). Many recent studies have shown that amphiphilic polymeric materials provide a promising solution to producing such coatings due to their surface dual functionality. In this work, poly(ethylene glycol) (PEG) of different molecular weights (Mw = 350, 550) was coupled to a saturated difunctional alkyl alcohol to generate amphiphilic surfactants (PEG-hydrocarbon-OH). The resulting macromolecules were then used as side chains to covalently modify a pre-synthesized PS8 K-b-P(E/B)25 K-b-PI10 K (SEBI or K3) triblock copolymer, and the final polymers were applied to glass substrata through an established multilayer surface coating technique to prepare fouling resistant coatings. The coated surfaces were characterized with AFM, XPS and NEXAFS, and evaluated in laboratory assays with two important fouling algae, Ulva linza (a green macroalga) and Navicula incerta, a biofilm-forming diatom. The results suggest that these polymer-coated surfaces undergo surface reconstruction upon changing the contact medium (polymer/air vs polymer/water), due to the preferential interfacial aggregation of the PEG segment on the surface in water. The amphiphilic polymer-coated surfaces showed promising results as both AF and FR coatings. The sample with longer PEG chain lengths (Mw = 550 g mol(-1)) exhibited excellent properties against both algae, highlighting the importance of the chemical structures on ultimate biological performance. Besides reporting synthesis and characterization of this new type of amphiphilic surface material, this work also provides insight into the nature of PEG/hydrocarbon amphiphilic coatings, and this understanding may help in the design of future generations of fluorine-free, environmentally friendly AF/FR polymeric coatings.

Bacteria and diatom resistance of silicones modified with PEO-silane amphiphiles

Silicone coatings with enhanced antifouling behavior towards bacteria, diatoms, and a diatom dominated slime were prepared by incorporating PEO-silane amphiphiles with varied siloxane tether lengths (a-c): α-(EtO)3Si(CH2)2-oligodimethylsiloxanen-block-poly(ethylene oxide)8-OCH3 [n = 0 (a), 4 (b), and 13 (c)]. Three modified silicone coatings (A-C) were prepared by the acid-catalyzed sol-gel cross-linking of a-c, respectively, each with a stoichiometric 2:3 M ratio of α, ω-bis(Si-OH)polydimethylsiloxane (Mn = 3,000 g mol(-1)). The coatings were exposed to the marine bacterium Bacillus sp.416 and the diatom (microalga) Cylindrotheca closterium, as well as a mixed community of Bacillus sp. and C. closterium. In addition, in situ microfouling was assessed by maintaining the coatings in the Atlantic Ocean. Under all test conditions, biofouling was reduced to the highest extent on coating C which was prepared with the PEO-silane amphiphile having the longest siloxane tether length (c).

Multilayers of fluorinated amphiphilic polyions for marine fouling prevention

Sequential layer-by-layer (LbL) deposition of polyelectrolytes followed by chemical cross-linking was investigated as a method to fabricate functional amphiphilic surfaces for marine biofouling prevention applications. A novel polyanion, grafted with amphiphilic perfluoroalkyl polyethylene glycol (fPEG) side chains, was synthesized and subsequently used to introduce amphiphilic character to the LbL film. The structure of the polyanion was confirmed by FTIR and NMR. Amphiphilicity of the film assembly was demonstrated by both water and hexadecane static contact angles. XPS studies of the cross-linked and annealed amphiphilic LbL films revealed the increased concentration of fPEG content at the film interface. In antifouling assays, the amphiphilic LbL films effectively prevented the adhesion of the marine bacterium Pseudomonas (NCIMB 2021).

Direct observation of the nanocomplex surface reorganization of antifouling silicones containing a highly mobile PEO-silane amphiphile

The water-driven, dynamic nanoscale reorganization of PEO-silane amphiphiles within a silicone matrix was directly observed via atomic force microscopy.

Patterned friction and cell attachment on schizophobic polyelectrolyte surfaces

A series of copolyelectrolytes with randomly positioned fluorinated (hydrophobic) and zwitterionic (hydrophilic) repeat units was synthesized and used to assemble multilayers. Regular layer-by-layer growth was observed for polymers with a charge density as low as 6%. The hydrophobicity of these "schizophobic" surfaces increased with increasing fluorine content. Polymer-on-polymer stamping was used to create patterned areas of low and high friction, probed by lateral force microscopy using a modified hydrophobic tip. "Contractile" A7r5 smooth muscle cells adhered to the fluorinated surfaces, but the introduction of zwitterion functionality induced a motile, less firmly attached morphology consistent with the "synthetic" motile phenotype of this cell line. In contrast with cells well adhered (on fluorinated) or completely nonadhering (on zwitterionic) films, incorporation of closely spaced repeat units with strongly contrasting hydrophobicity appears to generate intermediate cell adhesion behavior.

Effect of surface compositional heterogeneities and microphase segregation of fluorinated amphiphilic copolymers on antifouling performance

In this paper, a series of fluorinated amphiphilic copolymers composed of 2-perfluorooctylethyl methacrylate (FMA) and 2-hydroxyethyl methacrylate (HEMA) monomers were prepared, and their surface properties and antifouling performance were investigated. Bovine serum albumin (BSA) and human plasma fibrinogen (HFg) were used as model proteins to study protein adsorption onto the fluorinated amphiphilic surfaces. All the fluorinated amphiphilic surfaces exhibit excellent resistant performance of protein adsorption measured by X-ray photoelectron spectroscopy (XPS). The surface compositional heterogeneities on the molecular scale play an important role in the antifouling properties. It was found that the copolymers exhibited better antifouling properties than the corresponding homopolymers did, when the percentage of hydrophilic hydroxyl groups is from 4% to 7% and the percentage of hydrophobic fluorinated moieties is from 4% to 14% on the surface. In addition, the protein molecular size scale and the pattern of microphase segregation domains on the surface strongly affect the protein adsorption behaviors. These results demonstrate the desirable protein-resistant performance from the fluorinated amphiphilic copolymers and provide deeper insight of the effect of surface compositional heterogeneity and microphase segregation on the protein adsorption behaviors.

Nanopatterning Biomolecules by Block Copolymer Self-Assembly

The fabrication of sub-100 nm features with bioactive molecules is a laborious and expensive process. To overcome these limitations, we present a modular strategy to create nanostructured substrates (ca. 25 nm features) using functional block copolymers (BCPs) based on poly(styrene-b-ethylene oxide) to controllably promote or inhibit cell adhesion. A single type of BCP was functionalized with a peptide, a perfluorinated moiety, and both compounds, to tune nanoscale phase separation and interactions with NIH3T3 fibroblast cells. The focal adhesion formation and morphology of the cells were observed to vary dramatically according to the functionality presented on the surface of the synthetic substrate. It is envisioned that these materials will be useful as substrates that mimic the extracellular matrix (ECM) given that the adhesion receptors of cells can recognize clustered motifs as small as 10 nm, and their spatial orientation can influence cellular responses.

A Polyurethane Surface Modifier: Contrasting Amphiphilic and Contraphilic Surfaces Driven by block and random Soft Blocks having Trifluoroethoxymethyl and PEG Side Chains

A conventional MDI-BD-PTMO polyurethane was modified using 2 wt.% polyurethanes (U) having copolyoxetane soft blocks with hydrophobic 3F, CF₃CH₂OCH₂- and hydrophilic MEn, CH₃O(CH₂CH₂O)_nCH₂-, n = 3, 7) side chains. In contrast to neat 3F-co-MEn-U, 2 wt.% 3F-co-MEn-U compositions have physically stable morphologies and wetting behavior. Surface composition (XPS) and amphiphilic or contraphilic wetting are controlled by the 3F-co-MEn polyoxetane soft block architecture and MEn side chain length. Importantly, θ_rec can be tuned for 2 wt.% 3F-co-MEn-U compositions independent of swelling, which is controlled by the bulk polyurethane. AFM imaging led to a new morphological model whereby fluorous/PEG-hard block nano-aggregates combine to form near surface features culminating in micron scale texturing.