Comparison of synthetic dopamine-eumelanin formed in the presence of oxygen and Cu2+ cations as oxidants

Tailoring Surface Engineering with Expanded Precursor Libraries via Rapid Mussel-Inspired Chemistry

Mussel-inspired coating is a substrate-independent surface modification technology. However, its application is limited by time-consuming, tailoring specific functions require tedious secondary reaction. To overcome those drawbacks, a strategy for the rapid fabrication of diverse coatings by expanding the library of precursors using oxidation coupled with polyamine was proposed. Based on DFT simulations of the reaction pathways, a method was developed to achieve rapid deposition of coatings by coupling oxidation and polyamines, which simultaneously accelerated the oxidation of precursors and polymer chain growth. The feasibility and generalizability of the strategy was validated by the rapid coating of 10 catechol derivatives and polyamines on various substrates. The surface properties of the substrates such as functional group densities, Zeta potential and contact angles can be easily tuned. The tailored surface engineering application of the strategy was demonstrated by the heavy metal adsorbents and superwetting materials prepared through the delicate combination of different building blocks. Our strategy was flexible in terms of diverse surface engineering design which greatly enriched the connotation of mussel-inspired technique.

Ozone-Induced Rapid and Green Synthesis of Polydopamine Coatings with High Uniformity and Enhanced Stability

The development of green, controllable, and simplified pathways for rapid dopamine polymerization holds significant importance in the field of polydopamine (PDA) surface chemistry. In this study, a green strategy is successfully devised to accelerate and control the polymerization of dopamine through the introduction of ozone (O3 ). The findings reveal that ozone serves as an eco-friendly trigger, significantly accelerating the dopamine polymerization process across a broad pH range, spanning from 4.0 to 10.0. Notably, the deposition rate of PDA coatings on a silicon wafer reaches an impressive value of ≈64.8 nm h-1 (pH 8.5), which is 30 times higher than that of traditional air-assisted PDA and comparable to the fastest reported method. Furthermore, ozone exhibits the ability to accelerate dopamine polymerization even under low temperatures. It also enables control over the inhibition-initiation of the polymerization process by regulating the "ON/OFF" mode of the ozone gas. Moreover, the ozone-induced PDA coatings demonstrate exceptional characteristics, including high homogeneity, good hydrophilicity, and remarkable chemical and mechanical stability. Additionally, the ozone-induced PDA coatings can be rapidly and effectively deposited onto a wide range of substrates, particularly those that are adhesion-resistant, such as polytetrafluoroethylene (PTFE).

Selective sensing of catechol based on a fluorescent nanozyme with catechol oxidase activity

Nanozymes, an unusual category of nanomaterials possessing enzymatic properties, and have generated considerable interest regarding their application feasibilities on several important fronts. In the present work, an innovative sensing device for catechol was established ground on a fluorescent nanozyme (Cu-BDC-NH2) that exhibited catechol oxidase activity. The fluorescent nanozyme combines both functions of catechol recognition and response signal output, and can realize the sensing of catechol without the addition of other chromogenic agents. In the existence of Cu-BDC-NH2, catechol can be oxidized efficiently to produce quinones or polymers with strong electron absorption capacity, which immediately results in efficient fluorescence quenching of Cu-BDC-NH2. However, other common phenolic compounds, such as phenol, the other two diphenols (hydroquinone and resorcinol), phloroglucinol, and chlorophenol, do not result in efficient fluorescence quenching of Cu-BDC-NH2. The method shows a nice linear relationship between catechol concentration prep the fluorescence intensity of Cu-BDC-NH2 in the scope of 0-10 μM, with a detection limit of 0.997 μM. The detection of catechol in actual water samples has also achieved the satisfactory consequences, which provides a new strategy for the convenient and selective detection of catechol.

Experimental Methods to Get Polydopamine Films: A Comparative Review on the Synthesis Methods, the Films' Composition and Properties

In 2007, polydopamine (PDA) films were shown to be formed spontaneously on the surface of all known classes of materials by simply dipping those substrates in an aerated dopamine solution at pH = 8.5 in the presence of Tris(hydroxymethyl) amino methane buffer. This universal deposition method has raised a burst of interest in surface science, owing not only to the universality of this water based one pot deposition method but also to the ease of secondary modifications. Since then, PDA films and particles are shown to have applications in energy conversion, water remediation systems, and last but not least in bioscience. The deposition of PDA films from aerated dopamine solutions is however a slow and inefficient process at ambient temperature with most of the formed material being lost as a precipitate. This incited to explore the possibility to get PDA and related films based on other catecholamines, using other oxidants than dissolved oxygen and other deposition methods. Those alternatives to get PDA and related films are reviewed and compared in this paper. It will appear that many more investigations are required to get better insights in the relationships between the preparation method of PDA and the properties of the obtained coatings.

Carbonized Polydopamine-Based Nanocomposites: The Effect of Transition Metals on the Oxygen Electrocatalytic Activity

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the most critical processes in renewable energy-related technologies, such as fuel cells, water electrolyzers, and unitized regenerative fuel cells. N-doped carbon composites have been demonstrated to be promising ORR/OER catalyst candidates because of their excellent electrical properties, tunable pore structure, and environmental compatibility. In this study, we prepared porous N-doped carbon nanocomposites (NC) by combining mussel-inspired polydopamine (PDA) chemistry and transition metals using a solvothermal carbonization strategy. The complexation between dopamine catechol groups and transition metal ions (Fe, Ni, Co, Zn, Mn, Cu, and Ti) results in hybrid structures with embedded metal nanoparticles converted to metal-NC composites after the carbonization process. The influence of the transition metals on the structural, morphological, and electrochemical properties was analyzed in detail. Among them, Cu, Co, Mn, and Fe N-doped carbon nanocomposites exhibit efficient catalytic activity and excellent stability toward ORR. This method improves the homogeneous distribution of the catalytically active sites. The metal nanoparticles in reduced (MnO, Fe₃C) or metallic (Cu, Co) oxidation states are protected by the N-doped carbon layers, thus further enhancing the ORR performance of the composites. Still, only Co nanocomposite is also effective toward OER with a potential bifunctional gap (ΔE) of 0.867 V. The formation of Co-N active sites during the carbonization process, and the strong coupling between Co nanoparticles and the N-doped carbon layer could promote the formation of defects and the interfacial electron transfer between the catalyst surface, and the reaction intermediates, increasing the bifunctional ORR/OER performance.

Iron and copper ions accelerate and modify dopamine oxidation to eumelanin: implications for neuromelanin genesis

Dopamine (DA) is a precursor of neuromelanin (NM) synthesized in the substantia nigra of the brain. NM is known to contain considerable levels of Fe and Cu. However, how Fe and Cu ions affect DA oxidation to DA-eumelanin (DA-EM) and modify its structure is poorly understood. EMs were prepared from 500 µM DA, dopaminechrome (DAC), or 5,6-dihydroxyindole (DHI). Autoxidation was carried out in the absence or presence of 50 µM Fe(II) or Cu(II) at pH 7.4 and 37 ℃. EMs were characterized by Soluene-350 solubilization analyzing absorbances at 500 nm (A500) and 650 nm (A650) and alkaline hydrogen peroxide oxidation (AHPO) yielding various pyrrole carboxylic acids. Pyrrole-2,3,4,5-tetracarboxylic acid (PTeCA) served as a molecular marker of cross-linked DHI units. Importantly, Fe and Cu accelerated DA oxidation to DA-EM and DHI oxidation to DHI-EM several-fold, whereas these metals only weakly affected the production of DAC-EM. The A500 values indicated that DA-EM contains considerable portions of uncyclized DA units. Analysis of the A650/A500 ratios suggests that Fe and Cu caused some degradation of DHI units of DA-EM during 72-h incubation. Results with AHPO were consistent with the A500 values and additionally revealed that (1) DA-EM is less cross-linked than DAC-EM and DHI-EM and (2) Fe and Cu promote cross-linking of DHI units. In conclusion, Fe and Cu not only accelerate the oxidation of DA to DA-EM but also promote cross-linking and degradation of DHI units. These results help to understand how Fe and Cu in the brain affect the production and properties of NM.

Zwitterionic coating assisted by dopamine with metal-phenolic networks loaded on titanium with improved biocompatibility and antibacterial property for artificial heart

Introduction: Titanium (Ti) and Ti-based alloy materials are commonly used to develop artificial hearts. To prevent bacterial infections and thrombus in patients with implanted artificial hearts, long-term prophylactic antibiotics and anti-thrombotic drugs are required, and this may lead to health complications. Therefore, the development of optimized antibacterial and antifouling surfaces for Ti-based substrate is especially critical when designing artificial heart implants. Methods: In this study, polydopamine and poly-(sulfobetaine methacrylate) polymers were co-deposited to form a coating on the surface of Ti substrate, a process initiated by Cu²⁺ metal ions. The mechanism for the fabrication of the coating was investigated by coating thickness measurements as well as Ultraviolet-visible and X-ray Photoelectron (XPS) spectroscopy. Characterization of the coating was observed by optical imaging, scanning electron microscope (SEM), XPS, atomic force microscope (AFM), water contact angle and film thickness. In addition, antibacterial property of the coating was tested using Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as model strains, while the material biocompatibility was assessed by the antiplatelet adhesion test using platelet-rich plasma and in vitro cytotoxicity tests using human umbilical vein endothelial cells and red blood cells. Results and discussion: Optical imaging, SEM, XPS, AFM, water contact angle, and film thickness tests demonstrated that the coating was successfully deposited on the Ti substrate surface. The biocompatibility and antibacterial assays showed that the developed surface holds great potential for improving the antibacterial and antiplatelet adhesion properties of Ti-based heart implants.

Controllable AgNPs encapsulation to construct biocompatible and antibacterial titanium implant

Silver nanoparticles (AgNPs) are progressively becoming an in-demand material for both medical and life use due to their effective antimicrobial properties. The high surface area-to-volume ratio endows AgNPs with enhanced antibacterial capacity accompanied by inevitable cytotoxicity. Surface coating technique could precisely regulate the particle shape, aggregation, and Ag+ release pattern of AgNPs, by which the cytotoxicity could be significantly reduced. Various coating methods have been explored to shell AgNPs, but it remains a great challenge to precisely control the aggregation state of AgNPs and their shell thickness. Herein, we proposed a simple method to prepare a tunable polydopamine (pDA) coating shell on AgNPs just by tuning the reaction pH and temperature, yet we obtained high antibacterial property and excellent biocompatibility. SEM and TEM revealed that pDA coated AgNPs can form core-shell structures with different aggregation states and shell thickness. Both in vitro and in vivo antibacterial tests show that acid condition and heat-treatment lead to appropriate AgNPs cores and pDA shell structures, which endow Ti with sustained antibacterial properties and preferable cell compatibility. One month of implantation in an infected animal model demonstrated that the obtained surface could promote osteogenesis and inhibit inflammation due to its strong antibacterial properties. Therefore, this study provides a promising approach to fabricate biocompatible antibacterial surface.

Atomic force and infrared spectroscopic studies on the role of surface charge for the anti-biofouling properties of polydopamine films

Antibacterial polymer materials have gained interest due to their capability to inhibit or eradicate biofilms with greater efficiency in comparison with their monomeric counterparts. Among the antimicrobial and anti-biofouling polymers, catecholamine-based polymers - and in particular polydopamine - have been studied due to their favorable adhesion properties, which can be tuned by controlling the pH value. In this study, we used atomic force microscopy (AFM)-based spectroscopy to investigate the relation between the adhesion properties and surface charge density and the pH of electrochemically deposited polydopamine films presenting a dissociation constant of polydopamine of 6.3 ± 0.2 and a point of zero charge of 5.37 ± 0.06. Furthermore, using AFM and attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), the influence of the surface charge density of polydopamine on bacterial adhesion and biofilm formation was investigated. It was shown that the adhesion of Escherichia coli at positively charged polydopamine is three times higher compared to a negatively charged polymer, and that the formation of biofilms is favored at positively charged polymers.

Revisiting the adhesion mechanism of mussel-inspired chemistry

Mussel-inspired chemistry has become an ideal platform to engineer a myriad of functional materials, but fully understanding the underlying adhesion mechanism is still missing. Particularly, one of the most pivotal questions is whether catechol still plays a dominant role in molecular-scale adhesion like that in mussel adhesive proteins. Herein, for the first time, we reveal an unexplored adhesion mechanism of mussel-inspired chemistry that is strongly dictated by 5,6-dihydroxyindole (DHI) moieties, amending the conventional viewpoint of catechol-dominated adhesion. We demonstrate that polydopamine (PDA) delivers an unprecedented adhesion of 71.62 mN m-1, which surpasses that of many mussel-inspired derivatives and is even 121-fold higher than that of polycatechol. Such a robust adhesion mainly stems from a high yield of DHI moieties through a delicate synergy of leading oxidation and subsidiary cyclization within self-polymerization, allowing for governing mussel-inspired adhesion by the substituent chemistry and self-polymerization manner. The adhesion mechanisms revealed in this work offer a useful paradigm for the exploitation of functional mussel-inspired materials.

High-Efficient Vacuum Ultraviolet-Ozone Assist-Deposited Polydopamine for Poly(lactic-co-glycolic acid)-Coated Pure Zn toward Biodegradable Cardiovascular Stent Applications

Zinc is a prospective metal for biodegradable cardiovascular stent applications, but the excessively released Zn²⁺ during degradation remains a huge challenge in biocompatibility. Considerable efforts have been made to develop a high-efficient surface modification method, while maintaining adhesion strength, mechanical support, and vascular compatibility. Biomimetic polydopamine (PDA) can adhere to Zn tightly, subsequently achieving robust chemical bonds with poly(lactic-co-glycolic acid) (PLGA) coating. However, the deposition of PDA on Zn depends on the controlled conditions such as a sensitive pH and a long period of time. Herein, we introduce vacuum ultraviolet-ozone (VUV/O₃) assist-deposition technology to accelerate the polymerization of PDA on pure Zn, which shortens the process to 40 min at a moderate pH of 8.5 and improves the deposition rate by 1-2 orders of magnitude under sufficient active oxygen species (ROS). Additionally, PLGA/PDA coating enhances the corrosion resistance, and their effective protection maintains the mechanical properties after long-term corrosion. Moreover, the controlled Zn²⁺ release contributes to the superior in vitro biocompatibility, which inhibits the hemolysis rate and smooth muscle cell (SMC) proliferation. The enhanced endothelial cell (EC) proliferation is promising to promote the re-endothelialization, avoiding in-stent restenosis and neointimal hyperplasia. Such modified Zn might be a viable candidate for the treatment of cardiovascular diseases.

Fabrication of Dexamethasone-Loaded Dual-Metal-Organic Frameworks on Polyetheretherketone Implants with Bacteriostasis and Angiogenesis Properties for Promoting Bone Regeneration

Polyetheretherketone (PEEK) is a biocompatible polymer, but its clinical application is largely limited due to its inert surface. To solve this problem, a multifunctional PEEK implant is urgently fabricated. In this work, a dual-metal-organic framework (Zn-Mg-MOF74) coating is bonded to PEEK using a mussel-inspired polydopamine interlayer to prepare the coating, and then, dexamethasone (DEX) is loaded on the coating surface. The PEEK surface with the multifunctional coating provides superior hydrophilicity and favorable stability and forms an alkaline microenvironment when Mg²⁺, Zn²⁺, 2,5-dihydroxyterephthalic acid, and DEX are released due to the coating degradation. In vitro results showed that the multifunctional coating has strong antibacterial ability against both Escherichia coli and Staphylococcus aureus; it also improves human umbilical vein endothelial cell angiogenic ability and enhances rat bone marrow mesenchymal stem cell osteogenic differentiation activity. Furthermore, the in vivo rat subcutaneous infection model, chicken chorioallantoic membrane model, and rat femoral drilling model verify that the PEEK implant coated with the multifunctional coating has strong antibacterial and angiogenic ability and promotes the formation of new bone around the implant with a stronger bone-implant interface. Our findings indicate that DEX loaded on the Zn-Mg-MOF74 coating-modified PEEK implant with bacteriostasis, angiogenesis, and osteogenesis properties has great clinical application potential as bone graft materials.

Catalytical feature of optical nanoprobes of boron nitride quantum dots in the presence of Cu2+ for the determination of dopamine

Monitoring the concentration of dopamine (DA) is vital for preventing and diagnosing DA related diseases. In contrast to the traditional sensing methods for DA, in which direct or indirect effects on the optical probes are often recorded, a novel sensing concept is disclosed based on as a result of the in situ formation of polydopamine (PDA) originating from the synergetic effect between boron nitride quantum dots (BNQDs) and Cu2+. In the co-presence of BNQDs and Cu2+, DA was catalytically oxidized to PDA, accompanied by an obvious color change from colorless to brown. In contrast to previous reports, in which BNQDs have been employed as an optical probe, herein, the BNQDs not only acted as the optical energy donor, but also as the catalysts for the formation of PDA. The quenching efficiency resulting from the inner filter effect and the electron transfer between the BNQDs and PDA was directly proportional to the concentration of DA, ranging linearly from 2 to 80 μM with a limit of detection of 0.49 μM. The present system exhibited an outstanding selectivity for DA among other interfering coexisting biomolecules. Furthermore, the practical application of the proposed platform was verified by assaying DA in human plasma samples, and satisfactory recoveries ranging from 101.24% to 111.98% were obtained. With the satisfactory reliability, repeatability and stability, the proposed simple sensor showed significant potential for use in DA detection in other biomedical applications.

SERS characterization of dopamine and in situ dopamine polymerization on silver nanoparticles

Dopamine (DA) regulates several functions in the central nervous system and its depletion is responsible for psychological disorders like Parkinson's disease. Several analytical approaches have been presented for DA detection in pathological diagnosis. SERS spectroscopy is a highly promising technique for the sensitive detection of DA. However, an improvement in its detection in aqueous solution is highly desirable for reliable quantification in biological fluids. In this work, we explored a label-free SERS approach for DA detection, employing two conventional methods to synthesize Ag colloids: reduction via citrates (c-AgNPs) and reduction via hydroxylamine (h-AgNPs), and SERS measurements were performed with a laser at 488 nm wavelength. Under these conditions, DA was identified through reproducible SERS spectra in the c-AgNP medium; however, the SERS spectra of DA in h-AgNP solution showed a completely different SERS profile. SERS band analysis revealed that DA in h-AgNPs was oxidized and converted into polydopamine (PDA), which was triggered after exposure to laser radiation. DA oxidation and PDA formation were followed over time through the SERS band profile at pH 7, 9 and 12. We found that in situ PDA formation started after 50 min of laser irradiation of DA at pH 7, while DA was quickly oxidized at pH 9 and 12. Here, we present a detailed SERS band analysis of PDA, which sheds light on the molecular steps in the pathway formation of the PDA structure. Spectroscopic analysis and characterization revealed that a long laser exposure time led to the formation of stable PDA complexes with AgNPs, which allowed us to propose a novel approach for synthesis of AgNP-PDA composites. In conclusion, to detect DA through a label-free SERS approach, c-AgNPs must be employed, while stable AgNP-PDA materials can be achieved with h-AgNPs and 488 nm laser excitation.

Universal Surface Coating with a Non-Phenolic Molecule, Sulfonated Pyrene

Nature-inspired small molecules such as catecholamines and polyphenols have gained a great deal of attention because of the exceptional surface-coating property that is applicable to many diverse substrates. Many researchers have conducted studies to expand molecular pools with surface-coating properties, but previous reports have still been limited to phenolic molecules as surface-coating agents. In this study, we describe for the first time the material-independent coating properties of nonphenolic molecules, namely, sulfonated pyrenes with Zr^IV ions. Owing to the binding capability with several oxygen-containing ligands, Zr^IV can be used for the molecular assembly of sulfonated pyrenes. We also report on the mixing of multiple sulfonated pyrenes and Zr^IV results in cross-linked complexes that can coat diverse solid substrates. The resulting coating can serve as a platform for grafting functional polysaccharides.

Catecholamine-Copper Redox as a Basis for Site-Specific Single-Step Functionalization of Material Surfaces

Realization of robust and facile surface functionalization processes is critical to biomaterials and biotechnology yet remains a challenge. Here, we report a new chemical approach that enables operationally simple and site-specific surface functionalization. The mechanism involves a catechol-copper redox chemistry, where the oxidative polymerization of an alkynyl catecholamine reduces Cu(II) to Cu(I), which in situ catalyzes a click reaction with azide-containing molecules of interest (MOIs). This process enables drop-coating and grafting of two- and three-dimensional solid surfaces in a single operation using as small as sub-microliter volumes. Generalizability of the method is shown for immobilizing MOIs of diverse structure and chemical or biological activity. Biological applications in anti-biofouling, cellular adhesion, scaffold seeding, and tissue regeneration are demonstrated, in which the activities or fates of cells are site-specifically manipulated. This work advances surface chemistry by integrating simplicity and precision with multipurpose surface functionalization.

Photoswitchable Macroscopic Solid Surfaces Based On Azobenzene-Functionalized Polydopamine/Gold Nanoparticle Composite Materials: Formation, Isomerization and Ligand Exchange

The facile preparation of dynamic interfaces is presented based on the combination of photoisomerizable azobenzenes and polydopamine (PDA)/Au nanoparticle composite materials. Azobenzenes with different spacer lengths (C₃ , C₆ ) and surface-binding groups (SH, NH₂ ) were synthesized. The polymer layer on macroscopic quartz surface was prepared by the facile aerobic autopolymerisation of dopamine hydrochloride under basic conditions. The presence of redox-active catechol moieties meant that gold nanoparticles were formed on the polymer surface. The obtained UV-Vis spectroscopic results confirmed that following their successful assembly, the switching of azobenzenes on PDA/Au was not affected by the surface binding group and the spacer length of the azobenzene molecules under the measurement conditions. Furthermore, facilitated by the curved nature of the Au particles, the surface-bound azobenzene layer could be reconstructed by ligand-exchange processes, and the photochemical characterization of the mixed layer was performed.

Dual-aptamers labeled polydopamine-polyethyleneimine copolymer dots assisted engineering a fluorescence biosensor for sensitive detection of Pseudomonas aeruginosa in food samples

To ensure the food security and protect public health, development of rapid and reliable approaches to detecting foodborne pathogens is of great significance. In this study, polydopamine-polyethyleneimine (PDA-PEI) copolymer dots are prepared via the self-polymerization of dopamine and cross-linking with branched PEI at room temperature. The PDA-PEI copolymer dots are very stable against photobleaching, extreme pH, as well as high ionic strength. They are used as a fluorescent probe to fabricate a biosensor for rapid and sensitive detection and quantification of Pseudomonas aeruginosa (P. aeruginosa). In the biosensor, dual-aptamers of P. aeruginosa are used to label PDA-PEI copolymer dots. Compared to single aptamer labeled PDA-PEI dots, the dual-aptamers labeled PDA-PEI dots endow the biosensor with enhanced sensitivity for target pathogen. The fluorescence biosensor demonstrates a wide linear response to P. aeruginosa in the concentration range of 10¹-10⁷ cfu mL^-1 with acceptable selectivity. The limit of detection is calculated to be 1 cfu mL^-1. The whole detection process can be finished in 1.5 h. The feasibility of the fabricated biosensor is verified by successful determination of P. aeruginosa in skim milk, orange juice, and popsicle samples. The biosensor provides an alternative and attractive platform for rapid and sensitive detection of bacteria in food products.

Synthesis of Ultrasmall Synthetic Melanin Nanoparticles by UV Irradiation in Acidic and Neutral Conditions

Synthetic melanin nanoparticles have value in metal chelation, photoprotection, and biocompatibility. Applications of these materials have been reported in optics, biomedicine, and electronics. However, precise size control has remained relatively difficult-especially for materials below 1000 nm. In this paper we describe the synthesis of ultrasmall synthetic nanoparticles with size of 9.4-31.4 nm in weakly acidic and neutral conditions via UV-irradiation. Size control of these particles was possible by varying the pH from 6.4-10.0. We then used UV-vis, FTIR, and nuclear magnetic resonance to investigate the mechanism of UV-induced polymerization. The data show that reactive oxygen species from UV irradiation oxidizes intermediates of the reaction and accelerates the formation of these synthetic melanin structures.

Polydopamine-assisted surface modification for orthopaedic implants

Along with the massive use of implants in orthopaedic surgeries in recent few decades, there has been a tremendous demand for the surface modification of the implants to avoid surgery failure and improve their function. Polydopamine (PDA), being able to adhere to almost all kinds of substrates and possessing copious functional groups for covalently immobilizing biomolecules and anchoring metal ions, has been widely used for surface modification of materials since its discovery in the last decade. PDA and its derivatives can be used for the surface modification of orthopaedic implants to modulate cellular responses, including cell spreading, migration, proliferation, and differentiation, and may thereby enhance the function of existing implants. In addition, the osseointegration and antimicrobial properties of orthopaedic implants may also be improved by PDA-based coatings. The aim of this review is to provide a brief overview of current advances of surface modification technologies for orthopaedic implants using PDA and its derivatives as a medium. Given the versatility of PDA-based adhesion, such PDA-assisted surface modification technologies will certainly benefit the development of new orthopaedic implants.

THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE

Surface treatments of orthopaedic implants, which are normally inert materials, are essential for their performance in vivo. This review summarizes recent advances in the surface modification of orthopaedic implants using facile and highly versatile techniques based on the use of polydopamine (PDA) and its derivatives.

Polydopamine Nanoparticles Prepared Using Redox-Active Transition Metals

Autoxidation of dopamine to polydopamine by dissolved oxygen is a slow process that requires highly alkaline conditions. Polydopamine can be formed rapidly also in mildly acidic and neutral solutions by using redox-active transition-metal ions. We present a comparative study of polydopamine nanoparticles formed by autoxidation and aerobic or anaerobic oxidation in the presence of Ce(IV), Fe(III), Cu(II), and Mn(VII). The UV-vis spectra of the purified nanoparticles are similar, and dopaminechrome is an early intermediate species. At low pH, Cu(II) requires the presence of oxygen and chloride ions to produce polydopamine at a reasonable rate. The changes in dispersibility and surface charge take place at around pH 4, which indicates the presence of ionizable groups, especially carboxylic acids, on their surface. X-ray photoelectron spectroscopy shows the presence of three different classes of carbons, and the carbonyl/carboxylate carbons amount to 5-15 atom %. The N 1s spectra show the presence of protonated free amino groups, suggesting that these groups may interact with the π-electrons of the intact aromatic dihydroxyindole moieties, especially in the metal-induced samples. The autoxidized and Mn(VII)-induced samples do not contain metals, but the metal content is 1-2 atom % in samples prepared with Ce(IV) or Cu(II), and ca. 20 atom % in polydopamine prepared in the presence of Fe(III). These differences in the metal content can be explained by the oxidation and complexation properties of the metals using the general model developed. In addition, the nitrogen content is lower in the metal-induced samples. All of the metal oxidants studied can be used to rapidly prepare polydopamine at room temperature, but the possible influence of the metal content and nitrogen loss should be taken into account.

Effects of pH and Oxidants on the First Steps of Polydopamine Formation: A Thermodynamic Approach

We present a general thermodynamic top-down analysis of the effects of oxidants and pH on dopamine oxidation and cyclization, supplemented with UV-vis and electrochemical studies. The model is applicable to other catecholamines and various experimental conditions. The results show that the decisive physicochemical parameters in autoxidation are the p K values of the semiquinone and the amino group in the oxidized quinone. Addition of Ce(IV) or Fe(III) enhances dopamine oxidation in acidic media in aerobic and anaerobic conditions by the direct oxidation of dopamine and, in the presence of oxygen, also by the autoxidation of the formed semiquinone. At pH 4.5, the enhancement of the one-electron oxidation of dopamine explains the overall reaction enhancement, but at a lower pH, cyclization becomes rate-determining. Oxidation by Cu(II) at reasonable rates requires the presence of oxygen or chloride ions.

Proton-Gated Rectification Regimes in Nanofluidic Diodes Switched by Chemical Effectors

During the last decade, nanofluidic devices based on solid-state nanopores and nanochannels have come into scene in materials science and will not leave anytime soon. One of the main reasons for this is the excellent control over ionic transport exerted by such devices that promises further important advances when integrated into more complex molecular devices. As a result, pH, temperature, and voltage-regulated devices have been obtained. However, nowadays, there is still a necessity for molecule-driven nanofluidic devices. Here, a sugar-regulated pH-responsive nanofluidic diode is presented obtained by surface modification of conical polycarbonate nanochannels with electropolymerized 3-aminophenylboronic acid. Control over the ionic transport has been achieved by a successful decoration of asymmetric nanochannels with integrated molecular systems. The as-synthesized boronate-appended zwitterionic polymer exhibits an acid-base equilibrium that depends on the concentration of sugar, which ultimately acts as a chemical effector setting different pH-dependent rectification regimes. As a result, the same nanodevice can perform completely different proton-regulated nanofluidic operations, i.e., anion-driven rectification, cation-driven rectification, and no rectification, by simply varying the concentration of fructose in the electrolyte solution.

Dopamine polymerization promoted by a catecholase biomimetic CuII(μ-OH)CuII complex containing a triazine-based ligand

We describe herein the catecholase-like catalytic activity and dopamine polymerization by using a dinuclear [LCu^II(μ-OH)₂Cu^II](ClO₄)₂ (1) complex where L is the dinucleating triazine-based ligand 6-chloro-N²,N²,N⁴,N⁴-tetrakis(pyridin-2-ylmethyl)-1,3,5-triazine-2,4-diamine. The kinetic parameters (k_cat = 0.318 s^-1, K_M = 1.6 × 10^-3 mol L^-1, and k_cat/K_M = 198.8 L s^-1 mol^-1), mechanistic insights into the oxidation of 3,5-di-tert-butyl catechol and early characterization of poly(dopamine) are presented.

Visible-light initiated polymerization of dopamine in a neutral environment for surface coating and visual protein detection

Mussel-inspired polydopamine (PDA) coating is a promising avenue for surface modification.

Synthesis of Nm-PHB (nanomelanin-polyhydroxy butyrate) nanocomposite film and its protective effect against biofilm-forming multi drug resistant Staphylococcus aureus

Melanin is a dark brown ubiquitous photosynthetic pigment which have many varied and ever expanding applications in fabrication of radio-protective materials, food packaging, cosmetics and in medicine. In this study, melanin production in a Pseudomonas sp. which was isolated from the marine sponge Tetyrina citirna was optimized employing one-factor at a time experiments and characterized for chemical nature and stability. Following sonication nucleated nanomelanin (Nm) particles were formed and evaluated for antibacterial and antioxidant properties. Nanocomposite film was fabricated using combinations (% w/v) of polyhydroxy butyrate-nanomelanin (PHB:Nm) blended with 1% glycerol. The Nm was found to be spherical in shape with a diameter of 100-140 nm and showed strong antimicrobial activity against both Gram positive and Gram negative bacteria. The Nm-PHB nanocomposite film was homogeneous, smooth, without any cracks, and flexible. XRD and DSC data indicated that the film was crystalline in nature, and was thermostable up to 281.87 °C. This study represents the first report on the synthesis of Nm and fabrication of Nm-PHB nanocomposite film which show strong protective effect against multidrug resistant Staphyloccoccus aureus. Thus this Nm-PHB nanocomposite film may find utility as packaging material for food products by protecting the food products from oxidation and bacterial contamination.

Immobilization of Pt Nanoparticles via Rapid and Reusable Electropolymerization of Dopamine on TiO2 Nanotube Arrays for Reversible SERS Substrates and Nonenzymatic Glucose Sensors

Inspired by mussel-adhesion phenomena in nature, polydopamine (PDA) coatings are a promising route to multifunctional platforms for decorating various materials. The typical self-polymerization process of dopamine is time-consuming and the coatings of PDA are not reusable. Herein, a reusable and time-saving strategy for the electrochemical polymerization of dopamine (EPD) is reported. The PDA layer is deposited on vertically aligned TiO₂ nanotube arrays (NTAs). Owing to the abundant catechol and amine groups in the PDA layer, uniform Pt nanoparticles (NPs) are deposited onto the TiO₂ NTAs and can effectively prevent the recombination of electron-hole pairs generated from photo-electrocatalysis and transfer the captured electrons to participate in the photo-electrocatalytic reaction process. Compared with pristine TiO₂ NTAs, the as-prepared Pt@TiO₂ NTA composites exhibit surface-enhanced Raman scattering sensitivity for detecting rhodamine 6G and display excellent UV-assisted self-cleaning ability, and also show promise as a nonenzymatic glucose biosensor. Furthermore, the mussel-inspired electropolymerization strategy and the fast EPD-reduced nanoparticle decorating process presented herein can be readily extended to various functional substrates, such as conductive glass, metallic oxides, and semiconductors. It is the adaptation of the established PDA system for a selective, robust, and generalizable sensing system that is the emphasis of this work.

Bio-inspired strategy for controlled dopamine polymerization in basic solutions

Here we describe a facile and convenient method to achieve both spatial and temporal control of dopamine polymerization under basic conditions by the cooperative action of sodium ascorbate and UV irradiation.

Mussel-inspired polydopamine for bio-surface functionalization

Surface functionalization via molecular design has been a key approach to incorporate new functionalities into existing biomaterials for biomedical application. Mussel-inspired polydopamine (PDA) has aroused great interest as a new route to the functionalization of biomaterials, due to its simplicity and material independency in deposition, favorable interactions with cells, and strong reactivity for secondary functionalization. Herein, this review attempts to highlight the recent findings and progress of PDA in bio-surface functionalization for biomedical applications. The efforts made to elucidate the polymerization mechanism, PDA structure, and the preparation parameters have been discussed. Interactions between PDA coatings and the various cell types involved in different biomedical applications including general cell adhesion, bone regeneration, blood compatibility, and antimicrobial activity have also been highlighted. A brief discussion of post-functionalization of PDA and nanostructured PDA is also provided.

Sonochemically-Produced Metal-Containing Polydopamine Nanoparticles and Their Antibacterial and Antibiofilm Activity

A facile one-pot sonochemical synthesis of Cu-, Ag-, and hybrid Cu/Ag-based polydopamine nanoparticles (Cu-, Ag-, and Cu/Ag-PDA-NPs) and the mechanisms by which they exert antibacterial and antibiofilm activities are reported. We showed that the nanoparticles are spherical with a core-shell structure. Whereas Cu is chelated to the shell of Cu-PDA-NPs in oxidation states of +1/+2, the core of Ag-PDA-NPs is filled with elemental Ag°. Sonochemical irradiation of dopamine in the presence of both Cu(2+) and Ag(+) generates hybrid Cu/Ag-PDA-NPs, whose shells are composed of Cu-chelated PDA with Ag° in the core. The redox potential of the metals was found to be the main determinant of the location and oxidation state of the metals. Leaching studies under physiological conditions reveal a relatively fast release of Cu ions from the shell, whereas Ag leaches very slowly from the core. The metal-containing PDA-NPs are highly microbicidal and exhibit potent antibiofilm activity. The combination of both metals in Cu/Ag-PDA-NPs is especially effective against bacteria and robust biofilms, owing to the dual bactericidal mechanisms of the metals. Most importantly, both Ag- and Cu/Ag-PDA-NPs proved to be significantly more antibacterial than commercial Ag-NPs while exhibiting lower toxicity toward NIH 3T3 mouse embryonic fibroblasts. Mechanistically, the metal-containing PDA-NPs generate stable PDA-semiquinone and reactive oxygen species under physiological conditions, which contribute at least partly to the antimicrobial activity. We also demonstrated that simple treatment of surfaces with Ag-PDA-NPs converts them to antibacterial, the activity of which was preserved even after prolonged storage under ambient conditions.

Preparation of Thin Melanin-Type Films by Surface-Controlled Oxidation

The preparation of thin melanin films suitable for applications is challenging. In this work, we present a new alternative approach to thin melanin-type films using oxidative multilayers prepared by the sequential layer-by-layer deposition of cerium(IV) and inorganic polyphosphate. The interfacial reaction between cerium(IV) in the multilayer and 5,6-dihydroxyindole (DHI) in the adjacent aqueous solution leads to the formation of a thin uniform film. The oxidation of DHI by cerium(IV) proceeds via known melanin intermediates. We have characterized the formed DHI-melanin films using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), UV-vis spectroscopy, and spectroelectrochemistry. When a five-bilayer oxidative multilayer is used, the film is uniform with a thickness of ca. 10 nm. Its chemical composition, as determined using XPS, is typical for melanin. It is also redox active, and its oxidation occurs in two steps, which can be assigned to semiquinone and quinone formation within the indole structural motif. Oxidative multilayers can also oxidize dopamine, but the reaction stops at the dopamine quinone stage because of the limited amount of the multilayer-based oxidizing agent. However, dopamine oxidation by Ce(IV) was studied also in solution by UV-vis spectroscopy and mass spectrometry in order to verify the reaction mechanism and the final product. In solution, the oxidation of dopamine by cerium shows that the indole ring formation takes place already at low pH and that the mass spectrum of the final product is practically identical with that of commercial melanin. Therefore, layer-by-layer formed oxidative multilayers can be used to deposit functional melanin-type thin films on arbitrary substrates by a surface-controlled reaction.

CuSO4/H2O2-Induced Rapid Deposition of Polydopamine Coatings with High Uniformity and Enhanced Stability

Mussel-inspired polydopamine (PDA) deposition offers a promising route to fabricate multifunctional coatings for various materials. However, PDA deposition is generally a time-consuming process, and PDA coatings are unstable in acidic and alkaline media, as well as in polar organic solvents. We report a strategy to realize the rapid deposition of PDA by using CuSO4/H2O2 as a trigger. Compared to the conventional processes, our strategy shows the fastest deposition rate reported to date, and the PDA coatings exhibit high uniformity and enhanced stability. Furthermore, the PDA-coated porous membranes have excellent hydrophilicity, anti-oxidant properties, and antibacterial performance. This work demonstrates a useful method for the environmentally friendly, cost-effective, and time-saving fabrication of PDA coatings.

Physicochemical perspective on "polydopamine" and "poly(catecholamine)" films for their applications in biomaterial coatings

Bioinspired poly(catecholamine) based coatings, mostly "polydopamine," were conceived based on the chemistry used by mussels to adhere strongly to the surface of stones and wood in water and to remain attached to their substrates even under conditions of strong shear stresses. These kinds of films can in turn be easily modified with a plethora of molecules and inorganic (nano)materials. This review shows that poly(catecholamine) based coatings are an ideal film forming method for applications in the field of biomaterials. It is written from a physicochemical and a materials science perspective and discusses optical, chemical, electrochemical, and mechanical properties of polydopamine films. It further demonstrates that a better understanding of the polydopamine film deposition mechanism is warranted to improve the properties of these coatings even further.

Mussel-adhesive-inspired fabrication of multifunctional silver nanoparticle assemblies

The assembly of metal nanoparticles (NPs) has attracted a great deal of attention recently because of their collective properties that could not be exhibited by individual NPs. Here a one-step approach was reported for the fabrication of spherical silver NP assemblies (AgNAs). The formation of AgNAs simply included the stirring of silver ammonia and 3,4-dihydroxy-l-phenylalanine (DOPA) in aqueous solution at room temperature, in which DOPA acted as a reductant for AgNPs first because of its reducing ability and then directed the assembly of AgNPs into AgNAs. The AgNAs exhibited hierarchical structure with controllable sizes ranging from 180 to 610 nm by adjusting the concentrations of reagents. The two individual components, AgNPs and polyDOPA, also allowed AgNAs with multiple functions as demonstrated in this study of durable catalytic activity, high SERS sensitivity, and good antioxidant properties. The thin polyDOPA layer coated on AgNAs further offered the opportunity to modify the surface of AgNAs. The results presented here may provide a green and facile approach to designing multifunctional NP assemblies.