Influence of pH on the structure of multilayer films composed of strong and weak polyelectrolytes

Organic micropollutant removal and phosphate recovery by polyelectrolyte multilayer membranes: Impact of buildup interactions

Polyelectrolyte multilayer (PEM) deposition conditions can favorably or adversely affect the membrane filtration performance of various pollutants. Although pH and ionic strength have been proven to alter the characteristics of PEM, their role in determining the buildup interactions that control filtration efficacy has not yet been conclusively proved. A PEM constructed using electrostatic or non-electrostatic interactions from controlled deposition of a weak polyelectrolyte could retain both charged and uncharged pollutants from water. The fundamental relationship between polyelectrolyte charge density, PEM buildup interaction, and filtration performance was explored using a weak-strong electrolyte pair consisting of branching poly (ethyleneimine) and poly (styrene sulfonate) (PSS) across pH ranges of 4-10 and NaCl concentrations of 0 M-0.5 M. PEI/PSS multilayers at acidic pH were dominated by electrostatic interactions, which favored the selective removal of a charged solute, phosphate over chloride, while at alkaline pH, non-electrostatic interactions dominated, which favored the removal of oxybenzone (OXY), a neutral hydrophobic solute. The key factor determining these interactions was the charge density of PEI, which is controlled by pH and ionic strength of the deposition solutions. These findings indicate that the control of buildup interactions can largely influence the physico-chemical and transport characteristics of PEM membranes.

Lead-binding biogenic polyelectrolyte multilayer coating for lead retention in perovskite solar cells

Perovskite solar cells promise to deliver high efficiencies at low manufacturing costs. Yet on their way towards commercialization, they have to face the associated risk of potential lead leakage into the environment after damage to the cell's encapsulation. Here we present a new approach to generate a lead binding coating, based on a layer-by-layer deposition of biopolymers. A lead-adsorbing functionality was shown after subsequent crosslinking, demonstrating a high binding capacity. The lead binding capabilities could be further enhanced by increasing the thickness of the coatings, analyzed both in the supernatant and on the surface of the coated material. The thin-layered coating had a thickness of less than one micrometer, was stable even under low pH conditions and could successfully be transferred onto different substrates, ranging from silicon, gold and glass substrates to polymeric nonwoven materials with high surface areas, further increasing its lead binding capacity. This newly described coating was applied within perovskite solar cell stacks without impeding the overall efficiency but strongly reducing the amount of lead released after simulated rain tests on devices with damaged encapsulation. Accordingly, incorporation of lead-binding polyelectrolyte multilayers inside the encapsulation of perovskite solar cells shows great potential to limit the perovskite solar cells inherent risk of lead leakage in a sustainable manner.

Prediction of coating thickness for polyelectrolyte multilayers via machine learning

Layer-by-layer (LbL) deposition method of polyelectrolytes is a versatile way of developing functional nanoscale coatings. Even though the mechanisms of LbL film development are well-established, currently there are no predictive models that can link film components with their final properties. The current health crisis has shown the importance of accelerated development of biomedical solutions such as antiviral coatings, and the implementation of machine learning methodologies for coating development can enable achieving this. In this work, using literature data and newly generated experimental results, we first analyzed the relative impact of 23 coating parameters on the coating thickness. Next, a predictive model has been developed using aforementioned parameters and molecular descriptors of polymers from the DeepChem library. Model performance was limited because of insufficient number of data points in the training set, due to the scarce availability of data in the literature. Despite this limitation, we demonstrate, for the first time, utilization of machine learning for prediction of LbL coating properties. It can decrease the time necessary to obtain functional coating with desired properties, as well as decrease experimental costs and enable the fast first response to crisis situations (such as pandemics) where coatings can positively contribute. Besides coating thickness, which was selected as an output value in this study, machine learning approach can be potentially used to predict functional properties of multilayer coatings, e.g. biocompatibility, cell adhesive, antibacterial, antiviral or anti-inflammatory properties.

Polyelectrolyte Gels: Fundamentals, Fabrication and Applications

Polyelectrolyte gels are an important class of polymer gels and a versatile platform with charged polymer networks with ionisable groups. They have drawn significant recent attention as a class of smart material and have demonstrated potential for a variety of applications. This review begins with the fundamentals of polyelectrolyte gels, which encompass various classifications (i.e., origin, charge, shape) and crucial aspects (ionic conductivity and stimuli responsiveness). It further centralises recent developments of polyelectrolyte gels, emphasising their synthesis, structure-property relationships and responsive properties. Sequentially, this review demonstrates how polyelectrolyte gels' flourishing properties create attractiveness to a range of applications including tissue engineering, drug delivery, actuators and bioelectronics. Finally, the review outlines the indisputable appeal, further improvements and emerging trends in polyelectrolyte gels.

Effect of the Anchoring Layer and Transport Type on the Adsorption Kinetics of Lambda Carrageenan

The kinetics of lambda carrageenan (λ-car) adsorption/desorption on/from anchoring layers under diffusion- and convection-controlled transport conditions were investigated. The eighth generation of poly(amidoamine) dendrimers and branched polyethyleneimine possessing different shapes and polydispersity indexes were used for anchoring layer formation. Dynamic light scattering, electrophoresis, streaming potential measurements, optical waveguide lightmode spectroscopy, and quartz crystal microbalance were applied to characterize the formation of mono- and bilayers. The unique combination of the employed techniques enabled detailed insights into the mechanism of the λ-car adsorption mainly controlled by electrostatic interactions. The results show that the macroion adsorption efficiency is strictly correlated with the value of the final zeta potentials of the anchoring layers, the transport type, and the initial bulk concentration of the macroions. The type of the macroion forming the anchoring layer had a minor impact on the kinetics of λ-car adsorption. Besides significance to basic science, the results presented in this paper can be used for the development of biocompatible and stable macroion multilayers of well-defined electrokinetic properties and structure.

Chitosan-based smart hybrid materials: a physico-chemical perspective

Chitosan is one of the most studied cationic polysaccharides. Due to its unique characteristics of being water soluble, biocompatible, biodegradable, and non-toxic, this macromolecule is highly attractive for a broad range of applications. In addition, its complex behavior and the number of ways it interacts with different components in a system result in an astonishing variety of chitosan-based materials. Herein, we present recent advances in the field of chitosan-based materials from a physico-chemical perspective, with focus on aqueous mixtures with oppositely charged colloids, chitosan-based thin films, and nanocomposite systems. In this review, we focus our attention on the physico-chemical properties of chitosan-based materials, including solubility, mechanical resistance, barrier properties, and thermal behaviour, and provide a link to the chemical peculiarities of chitosan, such as its intrinsic low solubility, high rigidity, large charge separation, and strong tendency to form intra- and inter-molecular hydrogen bonds.

Weak polyelectrolyte-based multilayers via layer-by-layer assembly: Approaches, properties, and applications

Layer-by-layer (LbL) assembly is a nanoscale technique with great versatility, simplicity and molecular-level processing of various nanoscopic materials. Weak polyelectrolytes have been used as major building blocks for LbL assembly providing a fundamental and versatile tool to study the underlying mechanisms and practical applications of LbL assembly due to its pH-responsive charge density and molecular conformation. Because of high-density uncompensated charges and high-chain mobility, weak polyelectrolyte exponential multilayer growth is considered one of the fastest developing areas for organized molecular films. In this article, we systematically review the current status and developments of weak polyelectrolyte-based multilayers including all-weak-polyelectrolyte multilayers, weak polyelectrolytes/other components (e.g. strong polyelectrolytes, neutral polymers, and nanoparticles) multilayers, and exponentially grown weak polyelectrolyte multilayers. Several key aspects of weak polyelectrolytes are highlighted including the pH-controllable properties, the responsiveness to environmental pH, and synergetic functions obtained from weak polyelectrolyte/other component multilayers. Throughout this review, useful applications of weak polyelectrolyte-based multilayers in drug delivery, tunable biointerfaces, nanoreactors for synthesis of nanostructures, solid state electrolytes, membrane separation, and sensors are highlighted, and promising future directions in the area of weak polyelectrolyte-based multilayer assembly such as fabrication of multi-responsive materials, adoption of unique building blocks, investigation of internal molecular-level structure and mechanism of exponentially grown multilayers, and exploration of novel biomedical and energy applications are proposed.

Regulating the ionic current rectification behavior of branched nanochannels by filling polyelectrolytes

The overlapping of the electric double layer (EDL) in a nanochannel yields many interesting and significant electrokinetic phenomena such as ionic current rectification (ICR), which occurs only at a relatively low bulk salt concentration (∼1 mM) where the EDL thickness is comparable to the nanochannel size. In an attempt to raise this concentration to higher levels and the ICR performance improved appreciably, a branched nanochannel filled with polyelectrolytes (PEs) is proposed in this study. We show that these objectives can be achieved by choosing appropriate PE. For example, if the stem side of an anodic aluminun oxide nanochannel is filled with polystyrene sulfonate (PSS) an ICR ratio up to 850 can be obtained at 1 mM, which was not reported in previous studies. Taking account of the effect of electroosmotic flow, the underlying mechanisms of the ICR phenomena observed are discussed and the influences of the solution pH, the bulk salt concentration, and how the region(s) of a nanochannel is filled with PE examined. We show that the ICR behavior of a branched nanochannel can be modulated satisfactorily by filling highly charged PE and the solution pH.

Comparison of Crosslinking Efficiency in Dip and Roll-Deposited Coatings on Their Oxygen Barrier

Coating techniques are key factors in determining coated film properties. In the present study, nanocomposite coatings of poly(vinyl alcohol) and a nanoclay, montmorillonite, were deposited layer-by-layer using roll (doctor blade, DB) and dip coating techniques, in an effort to compare the impact of these techniques on the crosslinking efficiency and oxygen barrier of the coated films. The barrier properties at different relative humidities were tested, and the extent of nanoclay intercalation as well as the films' morphology was investigated. Barrier was further improved by crosslinking the coating with glyoxal and glutaraldehyde. Both techniques gave similar results but with a higher impact of relative humidity in roll coated films. Better results were achieved by tailoring the composition of those coatings to favor a higher density of hydrogen bonding in the coating.

Simultaneous characterization of physical, chemical, and thermal properties of polymeric multilayers using infrared spectroscopic ellipsometry

In this study, multilayered films of polyethylenimine/poly (sodium-p-styrene sulfonate) (PEI)/(PSS) and type I collagen/heparin sodium (COL)/(HEP) were fabricated using the layer-by-layer technique, and fully characterized using Infrared Variable Angle Spectroscopic Ellipsometry (IRVASE) to simultaneously analyze the chemistry, thickness, and roughness of the multilayers with respect to changes in pH of the washing solution, and changes in temperature. Film topography and Young's modulus were obtained by atomic force microscopy (AFM) and nanoindentation. Our results show that with IRVASE it is possible to analyze the thickness of the multilayers prepared using a washing solution of pH 5, obtaining values of 71.7 nm and 40.3 nm for three bilayers of PEI/PSS and COL/HEP, respectively. Film roughness varies between multilayer systems, obtaining values of 37.76 nm for three bilayers of PEI/PSS and 33.58 nm for three bilayers of COL/HEP. Increasing the pH of the washing solution for PEI/PSS yielded thinner films that were less susceptible to thermal induced changes in film chemistry in the range of 25 - 150 °C. PEI/PSS films decreased in thickness with increasing temperature up to 75 °C, whereas above 75 °C film thickness increased. Through IRVASE, a transition temperature for the PEI/PSS multilayers was observed at 75 °C. Temperatures above 37 °C drastically alter the chemistry and the thickness of the COL/HEP multilayers indicating a possible degradation of the polymers. We obtained, through nanoindentation, a Young's modulus of 15000 kPa and 9000 kPa for 12 bilayers of PEI/PSS and COL/HEP, respectively. These results demonstrate that, using IRVASE, we can simultaneously evaluate the physical, chemical, and thermal properties of synthetic and natural multilayered polymeric films.

Fluoride Removal from Aqueous Solutions Using Poly(Styrene Sulfonate)/Nanoalumina Multilayer Thin Films

In the present study, fluoride removal from drinking water is investigated using layer-by-layer (LbL) fabricated poly(sodium 4-styrene-sulfonate) (PSS)/Al2O3 thin films. The surface morphology of the fabricated thin films is characterized using atomic force microscopy and field emission-scanning electron microscopy. Optical profilometry is used to determine the self-assembly of the multilayer thin films. The effect of various parameters such as adsorbent dosage, contact time, initial fluoride content, number of bilayers, surface area, and pH is thoroughly studied. Fluoride removal increases with the number of bilayers and number of slides (total surface area). The amount of fluoride adsorbed increases from 11.32 to 26 mg L-1 when the number of substrates increases from 1 to 5. A 68% removal of fluoride is observed when 20 bilayers of PSS/Al2O3 thin films with three slides at an initial fluoride concentration of 5 mg L-1 are used, thereby bringing down the fluoride concentration level below the World Health Organization permissible limit. Slide reusability studies reveal that the fabricated thin films can be used for ten cycles without affecting the fluoride removal properties of the film. This study demonstrates the potential application of immobilized PSS/Al2O3 thin films as an effective adsorbent for drinking water purification.

Luminescence-Based Optical Sensors Fabricated by Means of the Layer-by-Layer Nano-Assembly Technique

Luminescence-based sensing applications range from agriculture to biology, including medicine and environmental care, which indicates the importance of this technique as a detection tool. Luminescent optical sensors are required to be highly stable, sensitive, and selective, three crucial features that can be achieved by fabricating them by means of the layer-by-layer nano-assembly technique. This method permits us to tailor the sensors' properties at the nanometer scale, avoiding luminophore aggregation and, hence, self-quenching, promoting the diffusion of the target analytes, and building a barrier against the undesired molecules. These characteristics give rise to the fabrication of custom-made sensors for each particular application.

Polyelectrolyte Multilayer Nanocoating Dramatically Reduces Bacterial Adhesion to Polyester Fabric

Bacterial adhesion to textiles is thought to contribute to odor and infection. Alternately exposing polyester fabric to aqueous solutions of poly(diallyldimethylammonium chloride) (PDDA) and poly(acrylic acid) (PAA) is shown here to create a nanocoating that dramatically reduces bacterial adhesion. Ten PDDA/PAA bilayers (BL) are 180 nm thick and only increase the weight of the polyester by 2.5%. The increased surface roughness and high degree of PAA ionization leads to a surface with a negative charge that causes a reduction in adhesion of Staphylococcus aureus by 50% when compared to uncoated fabric, after rinsing with sterilized water, because of electrostatic repulsion. S. aureus bacterial adhesion was quantified using bioluminescent radiance measured before and after rinsing, revealing 99% of applied bacteria were removed with a ten bilayer PDDA/PAA nanocoating. The ease of processing, and benign nature of the polymers used, should make this technology useful for rendering textiles antifouling on an industrial scale.

Fabrication of carbon nanotube nanocomposites via layer-by-layer assembly and evaluation in biomedical application

Aim: To investigate the influence of ion pairing of carboxylated multiwalled carbon nanotubes (MWCNT-COOH) and polycations on the layer-by-layer assembly of nanocomposites and their biocompatibility for biomedical applications. Materials & methods: Strong polycation poly(dimethyldiallylammonium chloride), and weak polycations chitosan and polyethyleneimine were selected to assembly with MWCNT-COOH. The MWCNT-COOH/polycation nanocomposites were analyzed by their physicochemical, electrical properties and biocompatibility. Results: The ion pairing of CNTs/polyelectrocytes played a critical role in the layer-by-layer assembly. Strong interactions between MWCNTs and poly(dimethyldiallylammonium chloride) produced thicker nanocomposites with rougher surfaces, higher MWCNT mass and better conductance. All the MWCNT multilayered nanocomposites were of good biocompatibility. Conclusion: The MWCNT multilayered nanocomposites hold high potential for biomedical applications.

Biomimetic Extracellular Environment Based on Natural Origin Polyelectrolyte Multilayers

Surface modification of biomaterials is a well-known approach to enable an adequate biointerface between the implant and the surrounding tissue, dictating the initial acceptance or rejection of the implantable device. Since its discovery in early 1990s layer-by-layer (LbL) approaches have become a popular and attractive technique to functionalize the biomaterials surface and also engineering various types of objects such as capsules, hollow tubes, and freestanding membranes in a controllable and versatile manner. Such versatility enables the incorporation of different nanostructured building blocks, including natural biopolymers, which appear as promising biomimetic multilayered systems due to their similarity to human tissues. In this review, the potential of natural origin polymer-based multilayers is highlighted in hopes of a better understanding of the mechanisms behind its use as building blocks of LbL assembly. A deep overview on the recent progresses achieved in the design, fabrication, and applications of natural origin multilayered films is provided. Such films may lead to novel biomimetic approaches for various biomedical applications, such as tissue engineering, regenerative medicine, implantable devices, cell-based biosensors, diagnostic systems, and basic cell biology.

Fine tuning of the pH-sensitivity of laponite-doxorubicin nanohybrids by polyelectrolyte multilayer coating

Despite the wide research done in the field, the development of advanced drug delivery systems with improved drug delivery properties and effective anticancer capability still remains a great challenge. Based on previous work that showed the potentialities of the nanoclay Laponite as a pH-sensitive doxorubicin (Dox) delivery vehicle, herein we report a simple method to modulate its extent of drug release at different pH values. This was achieved by alternate deposition of cationic poly(allylamine) hydrochloride and anionic poly(sodium styrene sulfonate) (PAH/PSS) polyelectrolytes over the surface of Dox-loaded Laponite nanoparticles using the electrostatic layer-by-layer (LbL) self-assembly approach. The successful formation of polyelectrolyte multilayer-coated Dox/Laponite systems was confirmed by Dynamic Light Scattering and zeta potential measurements. Systematic studies were performed to evaluate their drug release profiles and anticancer efficiency. Our results showed that the presence of the polyelectrolyte multilayers improved the sustained release properties of Laponite and allowed a fine tuning of the extension of drug release at neutral and acidic pH values. The cytotoxicity presented by polyelectrolyte multilayer-coated Dox/Laponite systems towards MCF-7 cells was in accordance with the drug delivery profiles. Furthermore, cellular uptake studies revealed that polyelectrolyte multilayer-coated Dox/Laponite nanoparticles can be effectively internalized by cells conducting to Dox accumulation in cell nucleus.

Evaluation of Adhesion Forces for the Manipulation of Micro-Objects in Submerged Environment through Deposition of pH Responsive Polyelectrolyte Layers

Optimization of surface treatment for reversible adhesion of micro-objects in liquid environment for the need in microassembly processes is presented. A spherical borosilicate probe and planar oxidized silicon wafer substrates were modified by deposition of pH sensitive polyelectrolyte films through layer-by-layer technique. Branched polyethylenimine (b-PEI) and poly(sodium styrenesulfonate) (PSS) were deposited in alternating manner on surfaces, and the influence of polyelectrolyte concentration, pH of deposition, and number of layers on the adhesion were successively examined. The multilayer buildup was followed by optical reflectometry (OR) and dissipative quartz crystal microbalance (QCM-D). The adhesion forces were monitored in aqueous environment at variable pH values by colloidal probe AFM microscopy. The thermodynamic work of adhesion was derived from the pull-off forces by using the Johnson-Kendall-Roberts (JKR) model and compared to the work of adhesion determined from contact angle measurements. It was found out that they correlate well, however, the values accessed from JKR model were underestimated, which was attributed mainly to the effect of surface roughness. Obtained results have demonstrated that it is possible to achieve repeatable reversible adhesion with the change of pH of submerged environment by appropriately tailoring the surface properties and therefore the prevailing surface forces.

Preparation and characterization of aptamer-polyelectrolyte films and microcapsules for biosensing and delivery applications

"Smart" materials are polymer systems that are able to change their physical or chemical properties in response to external stimuli in their environment. By adding a specific molecular recognition probe to a polymer, hybrid materials can be developed that retain the properties of the advanced polymer and gain the ability to respond to a specific molecular target. Aptamers are single-stranded oligonucleotides that are well-suited to serve as molecular recognition probes due to the specificity and affinity of their target recognition as well as their stability and ease of synthesis and labeling. In particular, their negatively charged backbone makes for their facile incorporation into polyelectrolyte-based materials. This article will provide a brief review of the currently reported biosensor and delivery platforms that have been reported employing aptamer-polyelectrolyte materials, as well as a detailed description of the methods used to synthesize and study films and microcapsules containing small-molecule aptamer probes.

Effect of Supporting Polyelectrolyte Multilayers and Deposition Conditions on the Formation of 1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine Lipid Bilayers

The formation of complete supported lipid bilayers by vesicle adsorption and rupture was studied in relation to deposition conditions of vesicles and underlying cushion formed from various polyelectrolytes. Lipid vesicles were formed from zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and negatively charged 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) in phosphate buffer of various pH with or without NaCl addition. Polyelectrolyte multilayer films (PEM) were constructed by sequential adsorption of alternately charged polyelectrolytes from their solutions-layer-by-layer deposition (LBL). The mechanism of the formation of supported lipid bilayer on polyelectrolyte films was studied by quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). QCM-D allowed following the adsorption kinetics while AFM measurements verified the morphology of lipid vesicles and isolated bilayer patches on the PEM cushions providing local topological images in terms of lateral organization. Additionally, polyelectrolyte cushions were characterized with ellipsometry to find thickness and swelling properties, and their roughness was determined using AFM. It has been demonstrated that the pH value and an addition of NaCl in the buffer solution as well as the type of the polyelectrolyte cushion influence the kinetics of bilayer formation and the quality of formed bilayer patches.

Freely drawn single lipid nanotube patterns

LNTs are unique 3D structures made only of safe and abundant biomaterials by self-assembly. The current bottleneck for developing applications using LNTs is the lack of an easy technique to pattern them on substrates. We report a method to free-draw single lipid nanotube (LNT) patterns in any shape on surfaces with 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) that takes an inverted hexagonal (HII) phase. We used pre-self-assembled LNTs or HII lipid blocks as a lipid reservoir from which new LNTs were pulled by applying a point load with a micromanipulator. The extreme simplicity of our technique originates from the fundamental nature of DOPE lipids that prefer a HII phase, while all the conventional approaches use PC lipids that form a lamellar phase. By adjusting the surface properties with polyelectrolyte multilayers, the created single LNT objects are able to remain adhered to the surface for over a week. Importantly, it could be shown that two vesicles loaded with caged fluorescent molecules were able to fuse well with a LNT, enabling diffusive transport of uncaged fluorescent molecules from one vesicle to the other.

Preparation and performance of antibacterial layer-by-layer polyelectrolyte nanofiltration membranes based on metal–ligand coordination interactions

Coordinative nanofiltration membranes with commendable antibacterial property and hydrophilicity are prepared and investigated extensively by alternating LBL assembly of polyethyleneimine and polystyrene sulfonate using Cu²⁺ as coordination agent.

Covalent crosslinked polyelectrolyte complex membrane with high negative charges towards anti-natural organic matter fouling nanofiltration

Removal of natural organic matter (NOM) from drinking water by membrane technology is attracting increasing attention.

Mixed mosaic membranes prepared by layer-by-layer assembly for ionic separations

Charge mosaic membranes, which possess distinct cationic and anionic domains that traverse the membrane thickness, are capable of selectively separating dissolved salts from similarly sized neutral solutes. Here, the generation of charge mosaic membranes using facile layer-by-layer assembly methodologies is reported. Polymeric nanotubes with pore walls lined by positively charged polyethylenimine moieties or negatively charged poly(styrenesulfonate) moieties were prepared via layer-by-layer assembly using track-etched membranes as sacrificial templates. Subsequently, both types of nanotubes were deposited on a porous support in order to produce mixed mosaic membranes. Scanning electron microscopy demonstrates that the facile deposition techniques implemented result in nanotubes that are vertically aligned without overlap between adjacent elements. Furthermore, the nanotubes span the thickness of the mixed mosaic membranes. The effects of this unique nanostructure are reflected in the transport characteristics of the mixed mosaic membranes. The hydraulic permeability of the mixed mosaic membranes in piezodialysis operations was 8 L m(-2) h(-1) bar(-1). Importantly, solute rejection experiments demonstrate that the mixed mosaic membranes are more permeable to ionic solutes than similarly sized neutral molecules. In particular, negative rejection of sodium chloride is observed (i.e., the concentration of NaCl in the solution that permeates through a mixed mosaic membrane is higher than in the initial feed solution). These properties illustrate the ability of mixed mosaic membranes to permeate dissolved ions selectively without violating electroneutrality and suggest their utility in ionic separations.

Stimulus-responsive polymers and other functional polymer surfaces as components in glass microfluidic channels

The integration of smart stimulus-responsive polymers as functional elements within microfluidic devices has greatly improved the performance capabilities of controlled fluid delivery. For their use as actuators in microfluidic systems, reversible expansion and shrinking are unique mechanisms which can be utilized as both passive and active fluid control elements to establish gate and valve functions (passive) and pumping elements (active). Various constituents in microfluidic glass channels based on stimulus-responsive elements have been reported based on pH-responsive, thermoresponsive and photoresponsive coatings. Fluid control and robust performance have been demonstrated in microfluidic devices in a number of studies. Here we give a brief overview of selected examples from the literature reporting on the use of stimulus response polymers as active or passive elements for fluid control in microfluidic devices, with specific emphasis on glass-based devices. The remaining challenges include improving switching times and achieving local addressability of the responsive constituent. We envisage tackling these challenges by utilizing redox-responsive polymers which offer fast and reversible switching and local addressability in combination with nanofabricated electrodes.

Interaction and structure in polyelectrolyte/clay multilayers: a QCM-D study

This study focuses on the investigation of the influence of the ionic strength on the internal structure, film forming behavior, and swelling properties of polyelectrolyte/clay multilayers. Layer-by-layer films were prepared with three different polyelectrolytes [polyethylenimine (PEI), polydiallyldimethylammoniumchloride (pDADMAC), and 2-hydroxy-3-trimethylammonium propyl chloride starch (HPMA starch)] in combination with laponite clay platelets on three different surfaces. All experiments were carried out at two different ionic strengths (30 mM or 500 mM NaCl). The experiments performed with strong polyelectrolytes revealed a higher film thickness and adsorbed masses of clay and polyelectrolyte at 500 mM NaCl. The films containing PEI showed different behavior and were considerably less sensitive to changes in the ionic strength. This was also reflected by the swelling behavior as demonstrated by quartz crystal microbalance with dissipation (QCM-D) measurements. Films comprising PEI showed, in contrast to the other polyelectrolytes, much lower swelling in water leading to more compact and stable films in humid environments which is important for numerous applications of LbL clay coatings.

Bioactive coronary stent coating based on layer-by-layer technology for siRNA release

One procedure to treat stenotic coronary arteries is the percutaneous transluminal coronary angioplasty (PTCA). In recent years, drug-eluting stents (DESs) have demonstrated elaborate ways to improve outcomes of intravascular interventions. To enhance DESs, the idea has evolved to design stents that elute specific small interfering RNA (siRNA) for better vascular wall regeneration. Layer-by-layer (LbL) technology offers the possibility of incorporating siRNA nanoplexes (NPs) to achieve bioactive medical implant coatings. The LbL technique was used to achieve hyaluronic acid/chitosan (HA/Chi) films with incorporated Chi-siRNA NPs. The multilayer growth was monitored by quartz crystal microbalance. The coating on the stents and its thickness were analyzed using fluorescence and scanning electron microscopy. All stents showed a homogeneous coating, and the polyelectrolyte multilayers (PEMs) were not disrupted after ethylene oxide sterilization or expansion. The in vitro uptake of fluorescent-labeled NPs from PEMs in primary human endothelial cells (ECs) was analyzed by flow cytometry for 2, 6 and 9 days. Furthermore, stents coated with HA/Chi and Chi-siRNA NPs were expanded into porcine arteries and showed ex vivo delivery of NPs. The films showed no critical results in terms of hemocompatibility. This study demonstrates that Chi-siRNA NPs can be incorporated into PEMs consisting of HA and Chi. We conclude that the NPs were delivered to ECs under in vitro conditions. Furthermore, under ex vivo conditions, NPs were transferred into porcine artery walls. Due to their good hemocompatibility, they might make an innovative tool for achieving bioactive coatings for coronary stents.

Hyaluronic acid/chitosan multilayer coatings on neuronal implants for localized delivery of siRNA nanoplexes

Binding, stabilizing and promoting cellular uptake of siRNA are all critical efforts in creating matrices for the localized delivery of siRNA molecules to target cells. In this study, we describe the generation of chitosan imidazole/siRNA nanoplexes (NPs) embedded in nano scope polyelectrolyte multilayers (PEMs) composed of hyaluronic acid and chitosan for sustained and localized drug delivery. Regular PEM build-up, successful integration of NPs and controlled release under physiological conditions were shown. Biological efficacy was evaluated in neuronal cell culture concerning cell adhesion, viability, NPs uptake and gene silencing. The additionally shown biological functionalization of neuronal implants possesses potential for future applications in the field of regenerative medicine and treatment of spinal cord injuries.

ZnO nanowire array-templated LbL self-assembled polyelectrolyte nanotube arrays and application for charged drug delivery

Vertically oriented and robust polyelectrolyte nanotube arrays with high density, large area and high uniformity were successfully grown on substrates by a ZnO nanowire array-templated layer-by-layer (LbL) self-assembly approach for the first time, and were further used to deliver charged drugs, showing that they not only possess pH-responsive loading property, but also significantly enhance the loading capacity and sustained release time. This work could be extended to fabricate polyelectrolyte nanotube arrays with different polyelectrolyte combinations, including weak polyelectrolyte/weak polyelectrolyte, weak polyelectrolyte/strong polyelectrolyte and strong polyelectrolyte/strong polyelectrolyte. With the great versatility to use various substrates and building blocks, the polyelectrolyte nanotube arrays may have great potential for broad applications such as biosensor arrays, bioreactor arrays and optoelectronics.

Phosphate recovery by high flux low pressure multilayer membranes

This work illustrates the potential use of PEI/PSS bilayers assembled via layer by layer (lbl) method on a nylon microfiltration membrane for the recovery of phosphate from water in the presence of chloride under ultrafiltration conditions. A total of nine bilayers were used for the selective recovery of phosphate. Bilayers were constructed from polyelectrolyte solutions of varying ionic strength (0-1 M of NaCl). The selected pH for deposition of PEI (5.9) and the presence of supporting salt in the polyelectrolyte solution is expected to provide membranes with high permeability and high charge density. This particular combination of bilayers yielded high flux membranes that allowed selective removal of H(2)PO(4)(-) in the presence of Cl(-) at low pressure (0.28 bar). The magnitude of negative solute rejection of chloride showed increasing trend with the number of bilayer for a particular salt concentration. Whereas the increase in magnitude with ionic strength is so high (-6.18 to -269.17 at 0.5 M NaCl for 9 bl) that gave the best observed Cl(-)/H(2)PO(4)(-) selectivity (310.23, flux 13.53 m(3)/m(2)-day). To the best of our knowledge, this is the first time a multilayer polyelectrolyte system with such a high selectivity and rejection for H(2)PO(4)(-) is reported. The solution flux decreased with the number of bilayers and ionic strength. The rejection of phosphate was dependent on feed pH, concentration of deposited polyelectrolyte solution, and composition of membrane support.

Creating water vapor barrier coatings from hydrophilic components

The preparation of water vapor barrier coatings composed of polyelectrolyte/clay multilayers using the layer-by-layer technique is reported. The suitability of different synthetic and renewable polyelectrolytes for the preparation of barrier coatings in combination with montmorillonite (MMT) platelets as well as the influence of the ionic strength and the number of bilayers on the coating performance was investigated. Highly hydrophilic and permeable cellulose films were used as substrate for determining the influence of the coatings on the water vapor transmission rate (WVTR). Improved barrier properties were realized by the use of polyethylene imine (PEI) or 2-hydroxy-3-trimethylammonium propyl chloride starch (HPMA starch) in combination with MMT. After the application of only 5 bilayers of PEI and MMT (thickness ∼40 nm) on each side of the cellulose film, the WVTR was significantly reduced. By the deposition of 40 PEI/MMT bilayers, the WVTR transmission rate was reduced by 68%. However, HPMA starch containing coatings led to vapor transmission reduction of up to 32% at the same number of coating steps. A strong correlation between the barrier properties of the coatings and the layer thickness was observed. The barrier properties of the coatings could be increased using higher ionic strengths. These results represent unprecedented water vapor barrier properties for coatings prepared from hydrophilic materials.

Impact of polyelectrolytes and their corresponding multilayers to human primary endothelial cells

The layer-by-layer technique, which allows simple preparation of polyelectrolyte multilayers, came into the focus of research for development of functionalized medical devices. Numerous literature exist that concentrate on the film build-up and the behaviour of cells on polyelectrolyte multilayers. However, in case of very soft polyelectrolyte multilayers, studies of the cell behaviour on these films are sometimes misleading with regard to clinical applications because cells do not die due to cytotoxicity but due to apoptosis by missing cell adhesion. It turns out that the adhesion in vitro, and thus, the viability of cells on polyelectrolyte multilayers is mostly influenced by their mechanical properties. In order to decide, which polyelectrolyte multilayers are suitable for implants, we take this problem into account by putting the substrates with soft films on top of pre-cultured human primary endothelial cells ('reverse assay'). Hence, the present work aims giving a more complete and reliable study of typical polyelectrolyte multilayers with regard to clinical applications. In particular, coatings consisting of hyaluronic acid and chitosan as natural polymers and sulfonated polystyrene and polyallylamine hydrochlorite as synthetic polymers were studied. The adsorption of polyelectrolytes was characterized by physico-chemical methods which show regular buildup. Biological examination of the native or modified polyelectrolyte multilayers was based on their effect to cell adhesion and morphology of endothelial cells by viability assays, immunostaining and scanning electron microscopy. Using the standard method, which is typically applied in literature--seeding cells on top of films--shows that the best adhesion and thus, viability can be achieved using sulfonated polystyrene/polyallylamine hydrochlorite. However, putting the films on top of endothelial cells reveals that hyaluronic acid/chitosan may also be suitable for clinical applications: This result is especially remarkable, since hyaluronic acid and chitosan mediate per se no cytotoxic effects, whereas the individual polyelectrolytes, sulfonated polystyrene and polyallylamine hydrochlorite, and their complexes show slight cytotoxicity.