Characterization of adsorbate-induced ordering transitions of liquid crystals within monodisperse droplets

Nanoparticle-Assisted Liquid Crystal Droplet Sensors Enable Analysis of Low-Concentration Species in Aqueous Medium

We introduce nanoparticle-assisted liquid crystal (LC) droplet-based sensors that allow determination of low-level concentrations of aqueous soluble species. The silica nanoparticles functionalized with mixed monolayers composed of two distinct groups, hydrophobic alkane tail- and charged group-terminated silanes, facilitated ternary physical interactions between the model analytes (methylene blue (MB) or methyl orange (MO)) and the nematic mesogens 5CB (4-cyano-4'-pentylbiphenyl), and the interfacial species of the nanoparticle. The response of the LC droplets was measured upon nanoparticle adsorption as a function of analyte concentration, which was characterized by the optical determination of the configuration distributions of the LC droplets. We highlight the importance of the charging and the composition of the nanoparticle interfaces for analytical purposes that allow accurate determination of the concentration of the analytes on the order of 0.01 ppb. Such a low concentration corresponds to a low interfacial coverage of nanoparticles, indicating the promisingly high sensitivity of the sensor platform to target analytes. Distinct from the past examples of the LC-based sensors, the nanoparticle-assisted LC sensors allow detection of the species that do not directly cause an ordering transition at the LC-water interfaces, which allow a broader range of analytical targets. The sensor platform that we report herein can be easily tunable for a range of target molecules and will find use in the determination of a wide range of micropollutants in aqueous environments.

Patterning of Protein-Sequestered Liquid-Crystal Droplets Using Acoustic Wave Trapping

Development of spatially organized structures and understanding their role in controlling kinetics of multistep chemical reactions are essential for the successful design of efficient systems and devices. While studies that showcase different types of methodologies for the spatial organization of various colloidal systems are known, design and development of well-defined hierarchical assemblies of liquid-crystal (LC) droplets and subsequent demonstration of biological reactions using such assemblies still remain elusive. Here, we show reversible and reconfigurable one-dimensional (1D) assemblies of protein-bioconjugate-sequestered monodisperse LC droplets by combining microfluidics with noninvasive acoustic wave trapping technology. Tunable spatial geometries and lattice dimensions can be achieved in an aqueous medium comprising ≈19 or 62 μm LC droplets. Different assemblies of a mixed population of larger and smaller droplets sequestered with glucose oxidase (GOx) and horseradish peroxidase (HRP), respectively, exhibit spatially localized enzyme kinetics with higher initial rates of reaction compared with GOx/HRP cascades implemented in the absence of an acoustic field. This can be attributed to the direct substrate transfer/channeling between the two complementary enzymes in close proximity. Therefore, our study provides an initial step toward the fabrication of LC-based devices for biosensing applications.

Decoding Optical Responses of Contact-Printed Arrays of Thermotropic Liquid Crystals Using Machine Learning: Detection and Reporting of Aqueous Amphiphiles with Enhanced Sensitivity and Selectivity

Surfactants and other amphiphilic molecules are used extensively in household products, industrial processes, and biological applications and are also common environmental contaminants; as such, methods that can detect, sense, or quantify them are of great practical relevance. Aqueous emulsions of thermotropic liquid crystals (LCs) can exhibit distinctive optical responses in the presence of surfactants and have thus emerged as sensitive, rapid, and inexpensive sensors or reporters of environmental amphiphiles. However, many existing LC-in-water emulsions require the use of complicated or expensive instrumentation for quantitative characterization owing to variations in optical responses among individual LC droplets. In many cases, the responses of LC droplets are also analyzed by human inspection, which can miss subtle color or topological changes encoded in LC birefringence patterns. Here, we report an LC-based surfactant sensing platform that takes a step toward addressing several of these issues and can reliably predict concentrations and types of surfactants in aqueous solutions. Our approach uses surface-immobilized, microcontact-printed arrays of micrometer-scale droplets of thermotropic LCs and hierarchical convolutional neural networks (CNNs) to automatically extract and decode rich information about topological defects and color patterns available in optical micrographs of LC droplets to classify and quantify adsorbed surfactants. In addition, we report computational capabilities to determine relevant optical features extracted by the CNN from LC micrographs, which can provide insights into surfactant adsorption phenomena at LC-water interfaces. Overall, the combination of microcontact-printed LC arrays and machine learning provides a convenient and robust platform that could prove useful for developing high-throughput sensors for on-site testing of environmentally or biologically relevant amphiphiles.

Computational Analysis on the Performance of Elongated Liquid Crystal Biosensors

Elongated ellipsoidal liquid crystal microdroplet reorientation dynamics are discussed in this paper for biosensor applications. To investigate the effect of elongated droplets on nematic liquid crystal droplet biosensors, we simulated a model of a liquid crystal droplet using ellipse geometry. Director reorientation is examined in relation to the elongated droplet shape. In addition, we examined aspect ratio as a factor affecting biosensor response time in relation to surface viscosity and anchoring energy. Finally, the findings suggest that the aspect ratio should be taken into account when designing biosensors. These results can be used to develop more effective biosensors for a variety of applications. This model then predicts the director reorientation angle, which is dependent on the anchoring energy and surface viscosity. This model further suggests that both surface viscosity and homeotropic anchoring energy play an important role when it comes to the director reorientation angle. We developed and applied a nonlinear unsteady-state mathematical model utilizing torque balance and Frank free energy according to the Leslie-Ericksen continuum theory for simulating elongated nematic liquid crystal biosensor droplets with aqueous interfaces. Using the Euler-Lagrange equation, a transient liquid crystal-aqueous interface realignment is modeled by changing the easy axis when surfactant molecules are added to the interface. The realignment at the surface of the droplet is assumed to be driven by the effect of the surfactant, which causes an anchoring transition. According to the results, the response time of the biosensor depends on the aspect ratio. Therefore, the elongation has the potential to control biosensing response time. The result of our study provides a better understanding of director reorientation in elongated liquid crystal droplets in biosensing applications through the numerical results which are presented in this paper.

Liquid Crystal Emulsions: A Versatile Platform for Photonics, Sensing, and Active Matter

The self-assembly of liquid crystals (LCs) is a fascinating method for controlling the organization of discrete molecules into nanostructured functional materials. Although LCs are traditionally processed in thin films, their confinement within micrometre-sized droplets has recently revealed new properties and functions, paving the way for next-generation soft responsive materials. These recent findings have unlocked a wealth of unprecedented applications in photonics (e.g. reflectors, lasing materials), sensing (e.g. biomolecule and pathogen detection), soft robotics (e.g. micropumps, artificial muscles), and beyond. This Minireview focuses on recent developments in LC emulsion designs and highlights a variety of novel potential applications. Perspectives on the opportunities and new directions for implementing LC emulsions in future innovative technologies are also provided.

Liquid Crystals as Multifunctional Interfaces for Trapping and Characterizing Colloidal Microplastics

Identifying and removing microplastics (MPs) from the environment is a global challenge. This study explores how the colloidal fraction of MPs assemble into distinct 2D patterns at aqueous interfaces of liquid crystal (LC) films with the goal of developing surface-sensitive methods for identifying MPs. Polyethylene (PE) and polystyrene (PS) microparticles are measured to exhibit distinct aggregation patterns, with addition of anionic surfactant amplifying differences in PS/PE aggregation patterns: PS changes from a linear chain-like morphology to a singly dispersed state with increasing surfactant concentration whereas PE forms dense clusters at all surfactant concentrations. Statistical analysis of assembly patterns using deep learning image recognition models yields accurate classification, with feature importance analysis confirming that dense, multibranched assemblies are unique features of PE relative to PS. Microscopic characterization of LC ordering at the microparticle surfaces leads to predict LC-mediated interactions (due to elastic strain) with a dipolar symmetry, a prediction consistent with the interfacial organization of PS but not PE. Further analysis leads to conclude that PE microparticles, due to their polycrystalline nature, possess rough surfaces that lead to weak LC elastic interactions and enhanced capillary forces. Overall, the results highlight the potential utility of LC interfaces for rapid identification of colloidal MPs based on their surface properties.

Ultra-stable liquid crystal droplets coated by sustainable plant-based materials for optical sensing of chemical and biological analytes

Herein, we demonstrate for the first time the synthesis of ultra-stable, spherical, nematic liquid crystal (LC) droplets of narrow size polydispersity coated by sustainable, biodegradable, plant-based materials that trigger a typical bipolar-to-radial configurational transition in dynamic response to chemical and biological analytes. Specifically, a highly soluble polymer, potato protein (PoP) and a physically-crosslinked potato protein microgel (PoPM) of ∼100 nm in diameter, prepared from the PoP, a byproduct of the starch industry, were compared for their ability to coat LC droplets. Although both PoP and PoPM were capable of reducing the interfacial tension between water and n-tetradecane <30 mN m^-1, PoPM-coated LC droplets showed better stability than the PoP-coated droplets via a Pickering-like mechanism. Strikingly, the Pickering LC droplets outperformed PoP-stabilized droplets in terms of dynamic response with 5× lower detection limit to model chemical analytes (sodium dodecyl sulphate, SDS) due to the difference in SDS-binding features between the protein and the microgel. To eliminate the effect of size polydispersity on the response, monodisperse Pickering LC droplets of diameter ∼16 μm were additionally obtained using microfluidics, which mirrored the response to chemical as well as biological analytes, i.e., primary bile acid, an important biomarker of liver diseases. We demonstrate that these eco-friendly microgels used for creating monodisperse, ultra-stable, LC complex colloids are powerful templates for fabricating next generation, sustainable optical sensors for early diagnosis in clinical settings and other sensing applications.

Liquid Crystal Droplet-Based Biosensors: Promising for Point-of-Care Testing

The development of biosensing platforms has been impressively accelerated by advancements in liquid crystal (LC) technology. High response rate, easy operation, and good stability of the LC droplet-based biosensors are all benefits of the long-range order of LC molecules. Bioprobes emerged when LC droplets were combined with biotechnology, and these bioprobes are used extensively for disease diagnosis, food safety, and environmental monitoring. The LC droplet biosensors have high sensitivity and excellent selectivity, making them an attractive tool for the label-free, economical, and real-time detection of different targets. Portable devices work well as the accessory kits for LC droplet-based biosensors to make them easier to use by anyone for on-site monitoring of targets. Herein, we offer a review of the latest developments in the design of LC droplet-based biosensors for qualitative target monitoring and quantitative target analysis.

Design of a Super-Liquid Crystal-Phobic Coating for Immobilizing Liquid Crystal μ-Droplets─Without Affecting Their Sensitivity

The aqueous interface of nematic liquid crystal (LC) that undergoes a triggered change in ordering transition of mesogens under an appropriate stimulus has emerged as an important tool for various relevant applications. Further, the confinement of LC into a micrometer dimension appeared to be a facile approach for improving their relevant features and performance. However, the optical characterization of ordering transition in a single micrometer-sized, bare, and free-floating LC droplet in the aqueous phase is an extremely challenging task due to unavoidable Brownian motion, which limits its scope for practical applications. Here, we exploited the 1,4-conjugate addition reaction to report a multilayer coating of a reactive nanocomplex that displayed an extreme repellence to beaded LC droplets with tailored adhesive force through the association of adequate orthogonal chemical modifications with glucamine and selected alkyl acrylates. Further, a spatially selective underwater adhesive super-LC-phobic pattern on a hydrophobic background was developed for immobilizing bare and micrometer-sized LC droplets from their aqueous dispersion without having any arbitrary spillage of the aqueous medium. The settled micrometer-sized LC droplets remained efficient for the triggered change in ordering transition from bipolar (having boojum defects at poles) to radial (with a single defect in the center) configuration. Eventually, a simple and fundamentally distinct chemical strategy of immobilizing a soft and functional material by associating bio-inspired wettability allowed to demonstrate the repetitive triggered LC ordering transition in a single and bare LC droplet.

Liquid crystal microcapillary-based sensors for affordable analytical applications

Stimuli-responsive properties of liquid crystals (LCs), when combined with their optical properties, offer sensitive and rapid sensing applications. Here, we propose and demonstrate a microcapillary-based method to be applied for the online detection of amphiphilic species, which can be further used for tracking biological and chemical species in aqueous media. Specifically, we used compartments (300-1400 μm) of nematic 4-cyano-4'-pentylbiphenyl (5CB) that were positioned into cylindrical glass microcapillaries that promote homeotropic anchoring. The flat surfaces of the cylindrical LC compartments were in contact with an aqueous media. We characterized the equilibrium and nonequilibrium response of LCs upon a change in their anchoring at the aqueous interfaces. Upon anchoring transition, we observed the formation of a positively charged defect at the proximity of the interface that moved to the center of the LC compartment and reached equilibrium, a four-petal configuration. This transition was observed to take an average of 41 ± 19 min., which we related to the motion of the defect due to the imbalance of the elastic forces. During the transition, we observed metastable states which could be removed via thermal treatment. We showed the capillary sensors to be useful considering their ease of additional quantification. We also show that the sensors are reversible that facilitate temporal and cumulative quantification. The findings reported in this study can further be used to develop sensors for specific purposes that require continuous tracking of the chemical and biological species that is critical for the health and safety of the individuals and society.

Nanoparticle adsorption induced configurations of nematic liquid crystal droplets

Nematic liquid crystal (LC) droplets have been widely used for the detection of molecular species. We investigate the response of micrometer sized nematic LC droplets against the adsorption of nanoparticles from aqueous media. We synthesized ∼ 100 nm-in-diameter silica nanoparticles and modified their surfaces to mediate either planar or homeotropic LC anchoring and a pH-dependent charge. We show surface functionality- and concentration-dependent configurations of the droplets consistent with the change in the surface anchoring and the formation of local heterogeneities upon adsorption of the nanoparticles to LC-aqueous interfaces. The adsorption of nanoparticles modified with dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride (DMOAP, homeotropic) exhibit a transition from bipolar to radial, whereas the adsorption of -COOH-terminated counterparts (planar) did not cause a configuration transition. By manipulating the electrostatic interactions, we controlled the adsorption of the nanoparticles to the LC-aqueous interfaces, providing access to the physicochemical properties of the nanoparticles. We demonstrate a temporal change in the droplet configurations caused by the adsorption of the nanoparticles functionalized with -COOH/DMOAP mixed monolayers. These results provide a basis for studies in applications for the detection of nano-sized species, for sensing applications that combine nanoparticles with LCs, and for the synthesis of anisotropic composite particles with complex structures.

Environmentally Responsive Emulsions of Thermotropic Liquid Crystals with Exceptional Long-Term Stability and Enhanced Sensitivity to Aqueous Amphiphiles

We report colloidally stable emulsions of thermotropic liquid crystals (LCs) that can detect the presence of amphiphilic analytes in aqueous environments. Our approach makes use of a Pickering stabilization strategy consisting of surfactant-nanoparticle complexes (SiO₂/C_nTAB, n = 8, 12, 16) that adsorb to aqueous/LC droplet interfaces. This strategy can stabilize LC emulsions against coalescence for at least 3 months. These stabilized LC emulsions also retain the ability to respond to the presence of model anionic, cationic, and nonionic amphiphiles (e.g., SDS, C₁₂TAB, C₁₂E₄) in aqueous solutions by undergoing "bipolar-to-radial" changes in LC droplet configurations that can be readily observed and quantified using polarized light microscopy. Our results reveal these ordering transitions to depend upon the length of the hydrocarbon tail of the C_nTAB surfactant used to form the stabilizing complexes. In general, increasing C_nTAB surfactant tail length leads to droplets that respond at lower analyte concentrations, demonstrating that this Pickering stabilization strategy can be used to tune the sensitivities of the stabilized LC droplets. Finally, we demonstrate that these colloidally stable LC droplets can report the presence of rhamnolipid, a biosurfactant produced by the bacterial pathogen Pseudomonas aeruginosa. Overall, our results demonstrate that this Pickering stabilization strategy provides a useful tool for the design of LC droplet-based sensors with substantially improved colloidal stability and new strategies to tune their sensitivities. These advances could increase the potential practical utility of these responsive soft materials as platforms for the detection and reporting of chemical and biological analytes.

Construction of Functional Materials in Various Material Forms from Cellulosic Cholesteric Liquid Crystals

Wide use of bio-based polymers could play a key role in facilitating a more sustainable society because such polymers are renewable and ecofriendly. Cellulose is a representative bio-based polymer and has been used in various materials. To further expand the application of cellulose, it is crucial to develop functional materials utilizing cellulosic physicochemical properties that are acknowledged but insufficiently applied. Cellulose derivatives and cellulose nanocrystals exhibit a cholesteric liquid crystal (ChLC) property based on rigidity and chirality, and this property is promising for constructing next-generation functional materials. The form of such materials is an important factor because material form is closely related with function. To date, researchers have reported cellulosic ChLC materials with a wide range of material forms-such as films, gels, mesoporous materials, and emulsions-for diverse functions. We first briefly review the fundamental aspects of cellulosic ChLCs. Then we comprehensively review research on cellulosic ChLC functional materials in terms of their material forms. Thus, this review provides insights into the creation of novel cellulosic ChLC functional materials based on material form designed toward the expanded application of cellulosics.

Polymer-Surfactant Driven Interactions and the Resultant Microstructure in Protein-Containing Liquid Crystal Droplets

Integration of molecular liquid crystals (LCs) with functional proteins can provide new class of materials for potential applications in optical biosensing. However, hydrophobic nematic LCs (length ∼ 1-2 nm) and hydrophilic proteins, size ∼ O (nm), do not intermix without chemical modification of at least one of them. Bioconjugation of proteins with a polyethylene glycol-based polymeric surfactant (PS) can provide a core-shell system that is sequestered within nonaqueous LC (4-cyano-4'-pentylbiphenyl) microdroplets. However, the nature of interactions between the components and detailed understanding of the resultant hybrid microstructure remains unclear. Here, using a combination of isothermal titration calorimetry (ITC), fluorescence microscopy, and infrared-imaging spectroscopy, we show that strong hydrophobic interactions between the LC and PS drives the sequestration of a myoglobin-PS (Mb-PS; dispersed in the aqueous phase) into the LC spherical microdroplets or even into a bulk LC phase. The average values of both, the binding constant and the standard molar enthalpy change, are increased by approximately a factor of 2.5 times when the unmodified Mb is conjugated to the PS. Small-angle X-ray scattering studies reveal that LC molecules act as a solvent for the Mb-PS conjugate; furthermore, the LC long-range order is disturbed due to mixing, as exemplified by the change in its coherence length from 8.9 to 5.7 nm. Detailed all-atomistic molecular dynamic simulations for a three-component PS-water-LC system show a change in interaction energy of -144 kJ mol^-1 PS^-1 upon the contact of PS chains (initially dispersed in water) with LC and agree with the ITC experiments.

Stable and Oriented Liquid Crystal Droplets Stabilized by Imidazolium Ionic Liquids

Liquid crystals represent a fascinating intermediate state of matter, with dynamic yet organized molecular features and untapped opportunities in sensing. Several works report the use of liquid crystal droplets formed by microfluidics and stabilized by surfactants such as sodium dodecyl sulfate (SDS). In this work, we explore, for the first time, the potential of surface-active ionic liquids of the imidazolium family as surfactants to generate in high yield, stable and oriented liquid crystal droplets. Our results show that [C₁₂MIM][Cl], in particular, yields stable, uniform and monodisperse droplets (diameter 74 ± 6 µm; PDI = 8%) with the liquid crystal in a radial configuration, even when compared with the standard SDS surfactant. These findings reveal an additional application for ionic liquids in the field of soft matter.

Structured Liquid Droplets as Chemical Sensors that Function Inside Living Cells

We report that micrometer-scale droplets of thermotropic liquid crystals (LCs) can be positioned inside living mammalian cells and deployed as chemical sensors to report the presence of toxins in extracellular environments. Our approach exploits droplets of LC enclosed in semi-permeable polymer capsules that enable internalization by cells. The LC droplets are stable in intracellular environments, but undergo optical changes upon exposure of cells to low, sub-lethal concentrations of toxic amphiphiles. Remarkably, LC droplets in intracellular environments respond to extracellular analytes that do not generate an LC response in the absence of cellular internalization. They also do not respond to other chemical stimuli or processes associated with cell growth or manipulation in culture. Our results suggest that droplet activation involves the transport and co-adsorption of amphiphilic toxins and other lipophilic cell components to the surfaces of internalized droplets. This work provides fundamentally new designs of biotic-abiotic systems that can report sensitively and selectively on the presence of select chemical agents outside cells and provides a foundation for the design of structured liquid droplets that can sense and report on other biochemical or metabolic processes inside cells.

Probing Nanoscale Lipid-Protein Interactions at the Interface of Liquid Crystal Droplets

Aqueous interfaces of liquid crystals (LCs) are widely explored in the design of functional interfaces to recapitulate the key aspects of biomolecular interactions in cellular milieu. Herein, using aqueous LC dispersions, we explore the interactions between mitochondrial cardiolipin and membrane-associated cytochrome c which play a pivotal role in the apoptotic signaling cascade. Conventional techniques used to decipher LC ordering at the droplet interface fail to give information about the interactions at a molecular level. Besides, owing to the complexity of LC systems and multiple determinants driving the LC reorientation, accurate analysis of the underlying mechanism responsible for the LC ordering transition remains challenging. Using a combination of atomistic simulations and microscopic and spectroscopic readouts, for the first time, we unveil the lipid-protein interactions that drive the reorientation at the LC droplet interface. The insights from our work are fundamental to the design of these interfaces for a spectrum of interfacial applications.

Liquid Crystals in Curved Confined Geometries: Microfluidics Bring New Capabilities for Photonic Applications and Beyond

The quest for interesting properties and phenomena in liquid crystals toward their employment in nondisplay application is an intense and vibrant endeavor. Remarkable progress has recently been achieved with regard to liquid crystals in curved confined geometries, typically represented as enclosed spherical geometries and cylindrical geometries with an infinitely extended axial-symmetrical space. Liquid-crystal emulsion droplets and fibers are intriguing examples from these fields and have attracted considerable attention. It is especially noteworthy that the rapid development of microfluidics brings about new capabilities to generate complex soft microstructures composed of both thermotropic and lyotropic liquid crystals. This review attempts to outline the recent developments related to the liquid crystals in curved confined geometries by focusing on microfluidics-mediated approaches. We highlight a wealth of novel photonic applications and beyond and also offer perspectives on the challenges, opportunities, and new directions for future development in this emerging research area.

Temperature-induced liquid crystal microdroplet formation in a partially miscible liquid mixture

Liquid-in-liquid droplets are typically generated by the partitioning of immiscible fluids, e.g. by mechanical shearing with macroscopic homogenisers or microfluidic flow focussing. In contrast, partially miscible liquids with a critical solution temperature display a temperature-dependent mixing behaviour. In this work, we demonstrate how, for a blend of methanol (MeOH) and the thermotropic liquid crystal (LC) 4-Cyano-4'-pentylbiphenyl (5CB), cooling from a miscible to an immiscible state allows the controlled formation of microdroplets. A near-room-temperature-induced phase separation leads to nucleation, growth and coalescence of mesogen-rich droplets. The size and number of the droplets is tunable on the microscopic scale by variation of temperature quench depth and cooling rate. Further cooling induces a phase transition to nematic droplets with radial configuration, well-defined sizes and stability over the course of an hour. This temperature-induced approach offers a scalable and reversible alternative to droplet formation with relevance in diagnostics, optoelectronics, materials templating and extraction processes.

Engineered liquid crystal nano droplets: insights from multi-scale simulations

Liquid crystal (LC) droplets have been investigated for a wide range of applications, from displays to sensors. Over the years, a need has arisen for complete understanding of the behaviour of LCs in droplets under different conditions for the development of advanced devices, for which accurate modelling is necessary. We show here, for the first time, both qualitative and quantitative agreement between coarse-grained molecular models and Q-tensor theory calculations for liquid crystal (LC) droplets. The approach is demonstrated for two types of droplet surfaces, which possess strong planar degenerate and strong homeotropic anchoring, respectively. Once its reliability has been proven, our approach was used to identify defects due to changes in anchoring in a small region on the LC droplet surface, which could be triggered, for example, by the adsorption of a nano-particle or a protein. Both coarse-grained simulations and Q-tensor analysis show the appearance of defects in well-determined locations within the LC droplet, albeit sometimes affected by degeneracy due to the symmetry of the systems being investigated. These results suggest the possibility of using LC droplets, in the future, as platforms for advanced sensing as well as for signal intensification.

Temperature-Driven Anchoring Transitions at Liquid Crystal/Water Interfaces

Controlling the anchoring of liquid crystal molecules at an interface with a water solution influences the entire organization of the underlying liquid crystal phase, which is crucial for many applications. The simplest way to stabilize such interfaces is by fabricating liquid crystal droplets in water; however, a greater sensitivity to interfacial effects can be achieved using liquid crystal shells, that is, spherical films of liquid crystal suspended in water. Anchoring transitions on those systems are traditionally triggered by the adsorption of surfactant molecules onto the interface, which is neither an instantaneous nor a reversible process. In this study, we report the ability to change the anchoring of 4-cyano-4'-pentylbiphenyl (5CB), one of the most widely used liquid crystals, at the interface with dilute water solutions of polyvinyl alcohol (PVA), a polymer commonly used for stabilizing liquid crystal shells, simply by controlling the temperature in the close vicinity of the liquid crystal clearing point. A quasi-static increase in temperature triggers an instantaneous reorientation of the molecules from parallel to perpendicular to the interfaces, owing to the local disordering effect of PVA on 5CB, prior to the phase transition of the bulk 5CB. We study this anchoring transition on both flat suspended films and spherical shells of liquid crystals. Switching anchoring entails a series of structural transformations involving the formation of transient structures in which topological defects are stabilized. The type of defect structure depends on the topology of the film. This method has the ability to influence both interfaces of the film nearly at the same time and can be applied to transform an initially polydisperse group of nematic shells into a monodisperse population of bivalent shells.

Direct Observation of Liquid Crystal Droplet Configurational Transitions using Optical Tweezers

Liquid crystals (LCs) are easily influenced by external interactions, particularly at interfaces. When rod-like LC molecules are confined to spherical droplets, they experience a competition between interfacial tension and elastic deformations. The configuration of LCs inside a droplet can be controlled using surfactants that influence the interfacial orientation of the LC molecules in the oil-phase of an oil in water emulsion. Here, we used the surfactant sodium dodecyl sulfate (SDS) to manipulate the orientation of 5CB molecules in a polydisperse emulsion and examined the configuration of the droplets as a function of SDS concentration. We triggered pronounced morphological transitions by altering the SDS concentration while observing an individual LC droplet held in place using an optical tweezer. We compared the experimental configuration changes to predictions from simulations. We observed a hysteresis in the SDS concentration that induced the morphological transition from radial to bipolar and back as well as a fluctuations in the configuration during the transition.

Seeing the Unseen: The Role of Liquid Crystals in Gas-Sensing Technologies

Fast, real-time detection of gases and volatile organic compounds (VOCs) is an emerging research field relevant to most aspects of modern society, from households to health facilities, industrial units, and military environments. Sensor features such as high sensitivity, selectivity, fast response, and low energy consumption are essential. Liquid crystal (LC)-based sensors fulfill these requirements due to their chemical diversity, inherent self-assembly potential, and reversible molecular order, resulting in tunable stimuliresponsive soft materials. Sensing platforms utilizing thermotropic uniaxial systems-nematic and smectic-that exploit not only interfacial phenomena, but also changes in the LC bulk, are demonstrated. Special focus is given to the different interaction mechanisms and tuned selectivity toward gas and VOC analytes. Furthermore, the different experimental methods used to transduce the presence of chemical analytes into macroscopic signals are discussed and detailed examples are provided. Future perspectives and trends in the field, in particular the opportunities for LC-based advanced materials in artificial olfaction, are also discussed.

Effects of droplet size and surfactants on anchoring in liquid crystal nanodroplets

Liquid crystal (LC) droplets attract scientific attention for many advanced applications, including, but not limited to optical and sensing devices. To aid experimental advancements, theoretical calculations have been conducted to quantify molecular driving forces responsible for the collective behaviour of LC molecules within micrometer-size spherical droplets. To quantify the LC molecular anchoring within spherical physical constraints, molecular simulations at atomistic resolution would be useful. In an attempt to bridge the gap between computational capabilities and experimental interest, coarse-grained simulations are used here to study nematic LC nanodroplets dispersed in water. A LC phase diagram is generated as a function of droplet size and temperature. The effect of adding surfactants on LC anchoring was quantified, considering surfactants of different molecular features. When few surfactants are present, they self-assemble at the droplet boojums regardless of their molecular features. All surfactants tested shifted LC orientation from bipolar to uniaxial. When the surfactants have a hydrophobic tail of sufficient length, they cause deviations from the spherical symmetry of LC droplets. Increasing the concentration of these surfactants enhances such phenomenon. Simulations were also conducted to assess the ability of the surfactants to prevent the agglomeration between two LC droplets. The results showed that coalescence was inevitable at all conditions and suggested that large enough surfactant concentrations can delay the phenomenon. The results presented could be helpful for designing novel surface-active compounds to develop optical and/or sensing devices at conditions in which mutual solubility between water and LCs is low.

Fluctuations and phase transitions of uniaxial and biaxial liquid crystals using a theoretically informed Monte Carlo and a Landau free energy density

In this work, we explore fluctuations during phase transitions of uniaxial and biaxial liquid crystals using a phenomenological free energy functional. We rely on a continuum-level description of the liquid crystal ordering with a tensorial parameter and a temperature dependent Landau polynomial expansion of the tensor's invariants. The free energy functional, over a three-dimensional periodic domain, is integrated with a Gaussian quadrature and minimized with a theoretically informed Monte Carlo method. We reconstruct analytical phase diagrams, following Landau and Doi's notations, to verify that the free energy relaxation reaches the global minimum. Importantly, our relaxation method is able to follow the thermodynamic behavior provided by other non-phenomenological approaches; we predict the first order character of the isotropic-nematic transition, and we identify the uniaxial-biaxial transition as second order. Finally, we use a finite-size scaling method, using the nematic susceptibility, to calculate the transition temperatures for 4-Cyano-4'-pentylbiphenyl (5CB) and N-(4-methoxybenzylidene)-4-butylaniline (MBBA). Our results show good agreement with experimental values, thereby validating our minimization method. Our approach is an alternative towards the relaxation of temperature dependent continuum-level free energy functionals, in any geometry, and can incorporate complicated elastic and surface energy densities.

Design and Application of Stimulus-Responsive Droplets and Bubbles Stabilized by Phospholipid Monolayers

Biomimetic colloidal particles are promising agents for biosensing, but current technologies fall far short of Nature's capabilities for sensing, assessing, and responding to stimuli. Phospholipid-containing cell membranes are capable of binding and responding to an enormous variety of biomolecules by virtue of membrane organization and the presence of receptor proteins. By tuning the composition and functionalization of simulated membranes, soft colloids such as droplets and bubbles can be designed to respond to various stimuli. Moreover, because lipid monolayers can surround almost any hydrophobic phase, the interior of the colloid can be selected to provide a sensitive readout, for example in the form of optical microscopy or acoustic detection. In this work, we review some advances made by our group and others in the formulation of lipid-coated particles with different internal phases such as fluorocarbons, hydrocarbons, or liquid crystals. In some cases, binding or displacement of stabilizing lipids gives rise to conformational changes or disruptions in local membrane geometry, which can be amplified by the interior phase. In other cases, multivalent analytes can promote aggregation or even membrane fusion, which can be utilized for optical or acoustic readout. By highlighting a few recent examples, we hope to show that lipid monolayers represent an extremely versatile biosensing platform that can react to and detect biomolecules by leveraging the unique capabilities of phospholipid membranes.

Thermally reconfigurable Janus droplets with nematic liquid crystalline and isotropic perfluorocarbon oil compartments

We report that mixtures of perfluorocarbon oils and hydrocarbon mesogens can be used to prepare multi-compartment (Janus) emulsion drops comprising coexisting nematic liquid crystalline (LC) and isotropic oil phases. The droplets exhibit stable spherical shapes with internal Janus-type morphologies that can be tuned widely through changes in temperature or adsorbates. In particular, we observe evidence of preferential adsorption of hydrocarbon or fluorocarbon surfactants on the interfaces of nematic versus isotropic domains, respectively, providing added control over the droplet structure. Comparisons of experiments and numerical simulations using a Landau-de Gennes continuum model provide insight into the relative importance of the LC elasticity and orientational-dependent interfacial energies on droplet morphologies and properties. We show that the hierarchical organization of the LC compartments generates optical properties and responsiveness not found in emulsions of isotropic oils.

Liquid crystalline droplets in aqueous environments: electrostatic effects

We demonstrate the strong impact of electrostatic properties on radial-bipolar structural transitions in nematic liquid crystal (LC) droplets dispersed in different aqueous environments. In the experimental part of the study, we systematically changed the electrostatic properties of both LC droplets and aqueous solutions. Mixtures of nematics were studied by combining LC materials with negative (azoxybenzene compounds) and strongly positive (cyanobiphenyl) dielectric anisotropy. The aqueous solutions were manipulated by introducing either polyvinyl alcohol, glycerol, electrolyte or amphiphilic anionic surfactant SDS into water. In the supporting theoretical study, we identified the key parameters influencing the dielectric constant and the electric field strength of aqueous solutions. We also estimated the impact of different electrolytes on the Debye length at the LC-aqueous interface. The obtained results are further analysed for chemical and biological sensing applications.

Poly(l-lysine)-Coated Liquid Crystal Droplets for Sensitive Detection of DNA and Their Applications in Controlled Release of Drug Molecules

Interactions between DNA and adsorbed poly(l-lysine) (PLL) on liquid crystal (LC) droplets were investigated using polarizing optical microcopy and epi-fluorescence microscopy. Earlier, we demonstrated that adsorption of PLL to the LC/aqueous interface resulted in homeotropic orientation of the LC and thus exhibited a radial configuration of the LC confined within the droplets. Subsequent adsorption of DNA (single-stranded DNA/double-stranded DNA) at PLL-coated LC droplets was found to trigger an LC reorientation within the droplets, leading to preradial/bipolar configuration of those droplets. To our surprise, subsequent exposure of complementary ssDNA to ssDNA/adsorbed PLL-modified LC droplets did not cause the LC reorientation. This is likely due to the formation of polyplexes (DNA-PLL complex) as confirmed by fluorescence microscopy and atomic force microscopy. In addition, dsDNA-adsorbed PLL droplets have been found to be effectively useful to displace (controlled release) propidium iodide (a model drug) encapsulated within dsDNA over time. These observations suggest the potential for a label-free droplet-based LC detection system that can respond to DNA and may provide a simple method to develop DNA-based drug nanocarriers.

Electrically induced structure transition in nematic liquid crystal droplets with conical boundary conditions

Polymer-dispersed liquid crystal composites have been a focus of study for a long time for their unique electro-optical properties and manufacturing by "bottom-up" techniques at large scales. In this paper, nematic liquid crystal oblate droplets with conical boundary conditions (CBCs) under the action of electric field were studied by computer simulations and polarized optical microscopy. Droplets with CBCs were shown to prefer an axial-bipolar structure, which combines a pair of boojums and circular disclinations on a surface. In contrast to droplets with degenerate planar boundary conditions (PBCs), hybridization of the two structure types in droplets with CBCs leads to a two-minima energy profile, resulting in an abrupt structure transition and bistable behavior of the system. The nature of the low-energy barrier in droplets with CBCs makes it highly sensitive to external stimuli, such as electric or magnetic fields, temperature, and light. In particular, the value of the electric field of the structure reorientation in droplets with CBCs was found to be a few times smaller than the one for droplets with PBCs, and the droplet state remained stable after switching off the voltage.

Orientation-shape coupling between liquid crystal and membrane through the anchoring effect

We perform a series of Monte Carlo simulations on an interface between a liquid crystal (LC) material in isotropic phase in its bulk and a surfactant membrane. These two objects are simulated using coarse-grained molecular models. We estimate physical properties of the membrane such as the interfacial tension and the bending rigidity, focusing on the anchoring effects of the membrane on the LC. According to our simulation results, when the strength of the homeotropic anchoring denoted by the anchoring parameter ξ is increased, the interfacial tension decreases and the bending rigidity first increases in ξ<ξ_{m}, and it then decreases in ξ_{m}<ξ. We explain these results by constructing a continuum field model based on the two order parameters: directional order of LC and the membrane shape. These order parameters are mutually interacting through the anchoring effect, the fluctuation coupling between the LC and the membrane, and the effect of the nematic layer.

Liquid crystals in micron-scale droplets, shells and fibers

The extraordinary responsiveness and large diversity of self-assembled structures of liquid crystals are well documented and they have been extensively used in devices like displays. For long, this application route strongly influenced academic research, which frequently focused on the performance of liquid crystals in display-like geometries, typically between flat, rigid substrates of glass or similar solids. Today a new trend is clearly visible, where liquid crystals confined within curved, often soft and flexible, interfaces are in focus. Innovation in microfluidic technology has opened for high-throughput production of liquid crystal droplets or shells with exquisite monodispersity, and modern characterization methods allow detailed analysis of complex director arrangements. The introduction of electrospinning in liquid crystal research has enabled encapsulation in optically transparent polymeric cylinders with very small radius, allowing studies of confinement effects that were not easily accessible before. It also opened the prospect of functionalizing textile fibers with liquid crystals in the core, triggering activities that target wearable devices with true textile form factor for seamless integration in clothing. Together, these developments have brought issues center stage that might previously have been considered esoteric, like the interaction of topological defects on spherical surfaces, saddle-splay curvature-induced spontaneous chiral symmetry breaking, or the non-trivial shape changes of curved liquid crystal elastomers with non-uniform director fields that undergo a phase transition to an isotropic state. The new research thrusts are motivated equally by the intriguing soft matter physics showcased by liquid crystals in these unconventional geometries, and by the many novel application opportunities that arise when we can reproducibly manufacture these systems on a commercial scale. This review attempts to summarize the current understanding of liquid crystals in spherical and cylindrical geometry, the state of the art of producing such samples, as well as the perspectives for innovative applications that have been put forward.

Thermotropic liquid crystal films for biosensors and beyond

Recent results on structural properties and possible bio-sensing applications of planar liquid crystal films are reviewed.

Liquid crystals based sensing platform-technological aspects

In bulk phase, liquid crystalline molecules are organized due to non-covalent interactions and due to delicate nature of the present forces; this organization can easily be disrupted by any small external stimuli. This delicate nature of force balance in liquid crystals organization forms the basis of Liquid-crystals based sensing scheme which has been exploited by many researchers for the optical visualization and sensing of many biological interactions as well as detection of number of analytes. In this review, we present not only an overview of the state of the art in liquid crystals based sensing scheme but also highlight its limitations. The approaches described below revolve around possibilities and limitations of key components of such sensing platform including bottom substrates, alignments layers, nature and type of liquid crystals, sensing compartments, various interfaces etc. This review also highlights potential materials to not only improve performance of the sensing scheme but also to bridge the gap between science and technology of liquid crystals based sensing scheme.

Design of Responsive and Active (Soft) Materials Using Liquid Crystals

Liquid crystals (LCs) are widely known for their use in liquid crystal displays (LCDs). Indeed, LCDs represent one of the most successful technologies developed to date using a responsive soft material: An electric field is used to induce a change in ordering of the LC and thus a change in optical appearance. Over the past decade, however, research has revealed the fundamental underpinnings of potentially far broader and more pervasive uses of LCs for the design of responsive soft material systems. These systems involve a delicate interplay of the effects of surface-induced ordering, elastic strain of LCs, and formation of topological defects and are characterized by a chemical complexity and diversity of nano- and micrometer-scale geometry that goes well beyond that previously investigated. As a reflection of this evolution, the community investigating LC-based materials now relies heavily on concepts from colloid and interface science. In this context, this review describes recent advances in colloidal and interfacial phenomena involving LCs that are enabling the design of new classes of soft matter that respond to stimuli as broad as light, airborne pollutants, bacterial toxins in water, mechanical interactions with living cells, molecular chirality, and more. Ongoing efforts hint also that the collective properties of LCs (e.g., LC-dispersed colloids) will, over the coming decade, yield exciting new classes of driven or active soft material systems in which organization (and useful properties) emerges during the dissipation of energy.

Design of β-CD-surfactant complex-coated liquid crystal droplets for the detection of cholic acid via competitive host-guest recognition

β-CD-C14TAB complex-coated 5CB droplets are designed by the adsorption of β-CD-C14TAB complexes at the 5CB/aqueous interface. We show that the 5CB droplets can be used as an optical probe for the selective detection of cholic acid in aqueous solution containing uric acid and urea via competitive host-guest recognition.

Anti-IgG-anchored liquid crystal microdroplets for label free detection of IgG

AIgG anchored LC microdroplets showing configurational transition from radial (a) to bipolar (b) upon interaction with IgG.

Covalent Immobilization of Caged Liquid Crystal Microdroplets on Surfaces

Microscale droplets of thermotropic liquid crystals (LCs) suspended in aqueous media (e.g., LC-in-water emulsions) respond sensitively to the presence of contaminating amphiphiles and, thus, provide promising platforms for the development of new classes of droplet-based environmental sensors. Here, we report polymer-based approaches to the immobilization of LC droplets on surfaces; these approaches introduce several new properties and droplet behaviors and thus also expand the potential utility of LC droplet-based sensors. Our approach exploits the properties of microscale droplets of LCs contained within polymer-based microcapsule cages (so-called "caged" LCs). We demonstrate that caged LCs functionalized with primary amine groups can be immobilized on model surfaces through both weak/reversible ionic interactions and stronger reactive/covalent interactions. We demonstrate using polarized light microscopy that caged LCs that are covalently immobilized on surfaces can undergo rapid and diagnostic changes in shape, rotational mobility, and optical appearance upon the addition of amphiphiles to surrounding aqueous media, including many useful changes in these features that cannot be attained using freely suspended or surface-adsorbed LC droplets. Our results reveal these amphiphile-triggered orientational transitions to be reversible and that arrays of immobilized caged LCs can be used (and reused) to detect both increases and decreases in the concentrations of model contaminants. Finally, we report changes in the shapes and optical appearances of LC droplets that occur when immobilized caged LCs are removed from aqueous environments and dried, and we demonstrate that dried arrays can be stored for months without losing the ability to respond to the presence of analytes upon rehydration. Our results address practical issues associated with the preparation, characterization, storage, and point-of-use application of conventional LC-in-water emulsions and provide a basis for approaches that could enable the development of new "off-the-shelf" LC droplet-based sensing platforms.

Liquid Crystal Interfaces Programmed with Enzyme-Responsive Polymers and Surfactants

Synthesis of biologically active peptide-polymer amphiphiles (PPAs), and characterization of assemblies formed by PPAs at the interfaces of liquid crystal (LC) microdroplets, is shown to permit the use of PPAs in strategies that can trigger ordering transitions in LC microdroplets in response to targeted biomolecular events.

Homeotropic nano-particle assembly on degenerate planar nematic interfaces: films and droplets

A continuum theory is used to study the effects of homeotropic nano-particles on degenerate planar liquid crystal interfaces. Particle self-assembly mechanisms are obtained from careful examination of particle configurations on a planar film and on a spherical droplet. The free energy functional that describes the system is minimized according to Ginzburg-Landau and stochastic relaxations. The interplay between elastic and surface distortions and the desire to minimize defect volumes (boojums and half-Saturn rings) is shown to be responsible for the formation of intriguing ordered structures. As a general trend, the particles prefer to localize at defects to minimize the overall free energy. However, multiple metastable configurations corresponding to local minima can be easily observed due to the high energy barriers that separate distinct particle arrangements. We also show that by controlling anchoring strength and temperature one can direct liquid-crystal mediated nanoparticle self-assembly along well defined pathways.

pH-Driven Ordering Transitions in Liquid Crystal Induced by Conformational Changes of Cardiolipin

We report an investigation of interfacial phenomena occurring at aqueous-liquid crystal (LC) interfaces that triggers an orientational ordering transition of the LC in the presence of cardiolipin (CL) by varying pH, salt concentration and valence. In particular, the effects of three different conformational isomeric forms of the CL are observed to cause the response of the LC ordering to vary significantly from one to another at those interfaces. An ordering transition of the LC was observed when the CL is mostly in undissociated (at pH 2) and/or in bicyclic (at pH 4) conformation in which LC shows changes in the optical appearance from bright to dark. By contrast, no change in the optical appearance of the LC was observed when the pH of the system increases to 8 or higher in which the CL mostly exists in the open conformation. Fluorescence microscopy measurements further suggest that pH-dependent conformational forms of the CL have different ability to self-assemble (thus different packing efficiency) at aqueous-LC interfaces leading to dissimilar orientational behavior of the LC. Specifically, we found that change in headgroup-headgroup repulsion of the central phosphatidyl groups of the CL plays a key role in tuning the lipid packing efficiency and thus responses to interfacial phenomena. Orientational ordering transition of the LC was also observed as a function of increasing the ionic strength (buffer capacity) and strongly influenced in the presence of mono and divalent cations. Langmuir-Blodgett (LB) and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) measurements provide further insight in modulation of the lipid packing efficiency and alkyl chain conformation of the CL at different pH and ionic conditions. Overall, the results presented in this paper establish that LCs offer a promising approach to differentiate different conformations (label free detection) of the CL through ordering transition of the LC at aqueous-LC interfaces.

The role of ligand–receptor interactions in visual detection of HepG2 cells using a liquid crystal microdroplet-based biosensor

Optical (a) and polarized (b) micrographs showing orientational transition in a LC microdroplet on contacting with a HepG2 cell in PBS solution.

Surfactant-induced ordering and wetting transitions of droplets of thermotropic liquid crystals "caged" inside partially filled polymeric capsules

We report a study of the wetting and ordering of thermotropic liquid crystal (LC) droplets that are trapped (or "caged") within micrometer-sized cationic polymeric microcapsules dispersed in aqueous solutions of surfactants. When they were initially dispersed in water, we observed caged, nearly spherical droplets of E7, a nematic LC mixture, to occupy ∼40% of the interior volume of the polymeric capsules [diameter of 6.7 ± 0.3 μm, formed via covalent layer-by-layer assembly of branched polyethylenimine and poly(2-vinyl-4,4-dimethylazlactone)] and to contact the interior surface of the capsule wall at an angle of ∼157 ± 11°. The internal ordering of LC within the droplets corresponded to the so-called bipolar configuration (distorted by contact with the capsule walls). While the effects of dodecyltrimethylammonium bromide (DTAB) and sodium dodecyl sulfate (SDS) on the internal ordering of "free" LC droplets are similar, we observed the two surfactants to trigger strikingly different wetting and configurational transitions when LC droplets were caged within polymeric capsules. Specifically, upon addition of SDS to the aqueous phase, we observed the contact angles (θ) of caged LC on the interior surface of the capsule to decrease, resulting in a progression of complex droplet shapes, including lenses (θ ≈ 130 ± 10°), hemispheres (θ ≈ 89 ± 5°), and concave hemispheres (θ < 85°). The wetting transitions induced by SDS also resulted in changes in the internal ordering of the LC to yield states topologically equivalent to axial and radial configurations. Although topologically equivalent to free droplets, the contributions that surface anchoring, LC elasticity, and topological defects make to the free energy of caged LC droplets differ from those of free droplets. Overall, these results and others reported herein lead us to conclude that caged LC droplets offer a platform for new designs of LC-droplet-based responsive soft matter that cannot be realized in dispersions of free droplets.