End-functionalized ROMP polymers for Biomedical Applications

Programming Mechanical Properties through Encoded Network Topologies

Polymer networks remain an essential class of soft materials. Despite their use in everyday materials, connecting the molecular structure of the network to its macroscopic properties remains an active area of research. Much current research is enabled by advances in modern polymer chemistry providing an unprecedented level of control over macromolecular structure. At the same time, renewed interest in self-healing, dynamic, and/or adaptable materials continues to drive substantial interest in polymer network design. As part of a special issue focused on research performed in the Polymer Science and Engineering Department at the University of Massachusetts, Amherst, this review highlights connections between macromolecular structure of networks and observed mechanical properties as investigated by the Tew research group.

Efficient end-group functionalization and diblock copolymer synthesis via Au(III) polymer reagents

Herein, we describe the synthesis of bench-stable organometallic Au(III) terminated polymer reagents. These reagents mediate the chemoselective S-arylation of thiol-containing small molecules and polymers to yield functionalized mono-telechelic polymers and diblock copolymers, respectively. These transformations proceed rapidly within minutes and produce conjugates in quantitative conversion, making this strategy a robust addition to the polymer functionalization toolbox.

Synthesis of polynorbornadienes by ring-opening metathesis polymerization and their saturated derivatives bearing various ester groups and carboxyl groups

Various symmetric and non-symmetric polynorbornadienes having a variety of ester groups and carboxyl groups were synthesized by ring-opening metathesis polymerization (ROMP) with Grubbs' third generation catalyst (G3 or [Ru]-III catalyst) in a controlled living manner from half-esters prepared by the selective monohydrolysis of symmetric diesters that we previously reported. The half-esters thus obtained can be directly submitted to ROMP with the G3 catalyst, leading to mostly the trans structure and narrow polydispersity indexes. The subsequent hydrogenation yielded saturated polymers, improving the thermostabilities according to the T ⁵ _d results. Our selective monohydrolysis reactions combined with ROMP initiated by the G3 catalyst have proven to be an efficient tool for the production of a variety of homopolymers with well-controlled structures in a living manner.

Direct discrimination of cell surface glycosylation signatures using a single pH-responsive boronic acid-functionalized polymer

Cell surface glycans serve fundamental roles in many biological processes, including cell-cell interaction, pathogen infection, and cancer metastasis. Cancer cell surface have alternative glycosylation to healthy cells, making these changes useful hallmarks of cancer. However, the diversity of glycan structures makes glycosylation profiling very challenging, with glycan 'fingerprints' providing an important tool for assessing cell state. In this work, we utilized the pH-responsive differential binding of boronic acid (BA) moieties with cell surface glycans to generate a high-content six-channel BA-based sensor array that uses a single polymer to distinguish mammalian cell types. This sensing platform provided efficient discrimination of cancer cells and readily discriminated between Chinese hamster ovary (CHO) glycomutants, providing evidence that discrimination is glycan-driven. The BA-functionalized polymer sensor array is readily scalable, providing access to new diagnostic and therapeutic strategies for cell surface glycosylation-associated diseases.

Chain transfer agents for the catalytic ring opening metathesis polymerization of norbornenes

Here, we present a detailed study of the metathesis activity of conjugated 1,3 diene derivatives in ring opening metathesis polymerization (ROMP) using Grubbs' 3rd generation catalyst (G3). A comprehensive screening of those derivatives revealed that monosubstituted 1,3 dienes show similar reactivities towards G3-alkylidenes as norbornene derivatives. Therefore, they represent perfect candidates for chain transfer agents in a kinetically controlled catalytic ROMP. This unprecedented reactivity allowed us to catalytically synthesize mono-end-functional poly(norborneneimide)s on the gram scale. Much more complex architectures such as star-shaped polymers could also be synthesized catalytically for the very first time via ROMP. This inexpensive and greener route to produce telechelic ROMP polymers was further utilized to synthesize ROMP block copolymers using bifunctional ROMP and ATRP/NCL initiators. Finally, the regioselective reaction of G3 with 1,3 diene derivatives was also exploited in the synthesis of a ROMP-PEG diblock copolymer initiated from a PEG macroinitiator.

Synthesis and Characterization of High Viscosity Cationic Poly(Proline-Epichlorohydrin) Composite Polymer with Antibacterial Functionalities

We report microbial resistance and catalytic activity of high viscosity cationic poly(proline-epichlorohydrin) composite (PRO-EPI) in the aqueous system. The PRO-EPI was prepared by a simple polycondensation, followed by FTIR, ¹H NMR, SEM, DLS, viscosity, and DSC/TGA characterization. Several concentrations of the PRO-EPI were tested against Gram-negative (E. coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) microorganisms. The antimicrobial screening revealed that PRO-EPI was a potent antimicrobial agent with the least inhibitory concentrations (MICs) of 128 µg/mL against Gram-negative microorganisms. The PRO-EPI indicated no inhibitory effect against Gram-positive microorganisms. It was determined that PRO-EPI contains polymeric-quaternary ammonium compounds that inactivate the Gram-negative microorganisms by a dual mode of action and carries domains for electrostatic interaction with the microbial membrane and an intracellular target. To study the removal of toxic industrial wastewater, congo red (CR) was tested using sodium borohydride as a reducing agent. Adsorption was achieved within 20 min at a rate constant of 0.92 ks⁻¹. UV–vis spectra showed that the removal of CR in the reaction solution was due to the breakup of the azo (–N=N–) bonds and adsorption of aromatic fragments. PRO is biodegradable and non-toxic, and PRO-EPI was found to be both antimicrobial and also acts as a catalyst for the removal of congo red dye.

Pulsed-Addition ROMP: Catalytic Syntheses of Heterotelechelic Polymers via Regioselective Chain Transfer Agents

Regioselective chain transfer agents are used to synthesize narrowly dispersed heterotelechelic polymers with a 15-fold decrease in catalyst consumption using the pulsed addition ROMP (PA-ROMP) technique. The commercially available Grubbs' third-generation catalyst (G3) is easily prefunctionalized with chain transfer agents in a short reaction time (30 min). After addition and consumption of a monomer, the excess chain transfer agent in the reaction medium end-functionalizes the polymer chain and regenerates the initiator very quickly (within 10 min) via a ring-opening-ring-closing sequence. This regenerated catalyst then initiates the polymerization of a subsequent batch of monomers, and the process is iterated for 15 times. Excellent control over molecular weight and dispersity from SEC analyses (over 15 pulses) confirmed the high efficacy of the chain transfer agents under this PA-ROMP method. The chain transfer agents are also extremely compatible with the synthesis of high molecular weight polymers (M/C = 150) with minimal catalyst decomposition. ¹H NMR as well as MALDI-ToF mass spectrometry further confirmed the high degree of chain end functionalization of the synthesized polymers.

One-Pot Heterotelechelic Metathesis Polymers via Regioselective Chain Transfer Agents

Single chain transfer agents are used to synthesize narrowly distributed heterotelechelic ROMP polymers in one pot, exploiting a new mechanistic and synthetic approach. The chain transfer agents carrying different functional groups are synthesized in a few straightforward steps. Prefunctionalization of commercially available Grubbs' third-generation catalyst is realized in situ using regioselective chain transfer agents within a short reaction period. After monomer consumption, the excess chain transfer agent in the reaction medium automatically end-functionalizes the polymer chain, yielding a heterotelechelic polymer via a ring-opening-ring-closing sequence. ¹H NMR, MALDI-ToF, and SEC analyses confirmed end-group functionalization as well as excellent control over molecular weight and dispersity. This strategy highlights a new way of synthesizing one-pot heterotelechelic ROMP polymers straightforwardly and efficiently.

Terpolymerization of Ethylene and Two Different Methoxyaryl-Substituted Propylenes by Scandium Catalyst Makes Tough and Fast Self-Healing Elastomers

The terpolymerization of a non-polar olefin (such as ethylene) and two different polar functional olefins in a controlled fashion is of great interest and importance but has hardly been explored to date. We report for the first time the terpolymerization of ethylene (E) and two different methoxyaryl-substituted propylenes (A^R1 P=hexylanisyl propylene; A^R2 P=methoxynaphthyl propylene or methoxypyrenyl propylene) by a half-sandwich scandium catalyst. The terpolymerization took place in a sequence-controlled fashion, affording unique multi-block copolymers composed of two different ethylene-alt-methoxyarylpropylene sequences E-alt-A^R1 P (soft segments) and E-alt-A^R2 P (hard segments) and relatively short ethylene-ethylene (EE) blocks (crystalline segments). The terpolymers exhibited excellent elasticity and unprecedented self-healing as a result of microphase separation of nanodomains of the crystalline EE segments and the hard amorphous E-alt-A^R2 P segments from a very flexible E-alt-A^R1 P matrix, demonstrating unique synergy of the three different components.

Controlling Molecular Aggregation-Induced Emission by Controlled Polymerization

In last twenty years, the significant development of AIE materials has been witnessed. A number of small molecules, polymers and composites with AIE activity have been synthesized, with some of these exhibiting great potential in optoelectronics and biomedical applications. Compared to AIE small molecules, macromolecular systems-especially well-defined AIE polymers-have been studied relatively less. Controlled polymerization methods provide the efficient synthesis of well-defined AIE polymers with varied monomers, tunable chain lengths and narrow dispersity. In particular, the preparation of single-fluorophore polymers through AIE molecule-initiated polymerization enables the systematic investigation of the structure-property relationships of AIE polymeric systems. Here, the main polymerization techniques involved in these polymers are summarized and the key parameters that affect their photophysical properties are analyzed. The author endeavored to collect meaningful information from the descriptions of AIE polymer systems in the literature, to find connections by comparing different representative examples, and hopes eventually to provide a set of general guidelines for AIE polymer design, along with personal perspectives on the direction of future research.

Catalytic Living Ring Opening Metathesis Polymerisation: The Importance of Ring Strain in Chain Transfer Agents

A recently developed catalytic living ring opening metathesis polymerisation (ROMP) was investigated using a series of reversible chain transfer agents (CTA) carrying either cyclopentene or cyclohexene rings, differing only in ring strain. All cyclopentene derivatives examined showed significantly faster reaction rates than the corresponding cyclohexene derivatives. This resulted in lower molecular weight dispersities and better control of the molecular weight for the cyclopentene compared to the cyclohexene CTAs. Both Grubbs' second and third generation catalysts could be employed in catalytic living ROMP using cyclopentene CTA derivatives. The kinetics of different CTAs were studied, block copolymers were synthesised and residual ruthenium quantified by ICP-OES. All polymers were fully characterised by NMR, GPC and MALDI-ToF mass spectrometry. The new cyclopentene CTAs are readily synthesised in a few straightforward steps and provide faster reaction kinetics than all previously reported reversible CTAs.

Protein Transduction Domain Mimics Facilitate Rapid Antigen Delivery into Monocytes

Delivering peptides and proteins with intracellular function represents a promising avenue for therapeutics, but remains a challenge due to the selective permeability of the plasma membrane. The successful delivery of cytosolically active proteins would enable many opportunities, including improved vaccine development through major histocompatibility complex (MHC) class I antigen display. Extended research using cell-penetrating peptides (CPPs) has aimed to facilitate intracellular delivery of exogenous proteins with some success. A new class of polymer-based mimics termed protein transduction domain mimics (PTDMs), which maintain the positive charge and amphiphilic nature displayed by many CPPs, was developed using a poly-norbornene-based backbone. Herein, we use a previously characterized PTDM to investigate delivery of the model antigen SIINFEKL into leukocytes. Peptide delivery into over 90% of CD14+ monocytes was detected in less than 15 min with nominal inflammatory cytokine response and high cell viability. The co-delivery of a TLR9 agonist and antigen using the PTDM into antigen-presenting cells in vitro showed presentation of SIINFEKL in association with MHC class I molecules, in addition to upregulation of classical differentiation markers revealing the ability of the PTDM to successfully deliver cargo intracellularly and show application in the field of immunotherapy.

Dual Polymerizations: Untapped Potential for Biomaterials

Block copolymers with unique architectures and those that can self-assemble into supramolecular structures are used in medicine as biomaterial scaffolds and delivery vehicles for cells, therapeutics, and imaging agents. To date, much of the work relies on controlling polymer behavior by varying the monomer side chains to add functionality and tune hydrophobicity. Although varying the side chains is an efficient strategy to control polymer behavior, changing the polymer backbone can also be a powerful approach to modulate polymer self-assembly, rigidity, reactivity, and biodegradability for biomedical applications. There are many developments in the syntheses of polymers with segmented backbones, but these developments are not widely adopted as strategies to address the unique constraints and requirements of polymers for biomedical applications. This review highlights dual polymerization strategies for the synthesis of backbone-segmented block copolymers to facilitate their adoption for biomedical applications.

Design and synthesis of a dual imageable theranostic platinum prodrug for efficient cancer therapy

Platinum-based chemotherapeutic agents are considered first-line treatments for various cancers but their application is limited by the lack of site specificity and severe side effects.

Efficient and Facile End Group Control of Living Ring-Opening Metathesis Polymers via Single Addition of Functional Cyclopropenes

Living ROMP has become an important technique for preparing well-controlled, highly functional polymers; however, installing functional groups at the end of living ROMP polymers is not as straightforward as ROMP itself. We report a simple, efficient strategy to introduce functionalities at the chain end of living polynorbornenes via highly selective single addition of disubstituted 1,1-cyclopropenes (CPEs) with no homopropagation. Unlike many other methods for ROMP chain end functionalization, our method does not result in catalyst termination, allowing for further functionalization after CPE addition. The remarkable reactivity of such CPEs allowed for quantitative chain end functionalization to install a variety of useful functionalities, including halides, aldehydes, ketones, amines, and dyes, without using a large excess of CPEs. These polymer chain ends can be readily modified using a range of postpolymerization modifications.

Synthesis and Bioactivity of Polymer-Based Synthetic Mimics of Antimicrobial Peptides (SMAMPs) Made from Asymmetrically Disubstituted Itaconates

A series of asymmetrically disubstituted diitaconate monomers is presented. Starting from itaconic anhydride, functional groups could be placed selectively at the two nonequivalent carbonyl groups. By using 2D NMR spectroscopy, it was shown that the first functionalization step occurred at the carbonyl group in the β position to the double bond. These monomers were copolymerized with N,N-dimethylacrylamide (DMAA) to yield polymer-based synthetic mimics of antimicrobial peptides (SMAMPs). They were obtained by free radical polymerization, a metal-free process, and still maintained facial amphiphilicity at the repeat unit level. This eliminates the need for laborious metal removal and is advantageous from a regulatory and product safety perspective. The poly(diitaconate-co-DMAA) copolymers obtained were statistical to alternating, and the monomer feed ratio roughly matched that of the repeat unit content of the copolymers. Investigations of varied R group hydrophobicity, repeat unit ratio, and molecular mass on antimicrobial activity against Escherichia coli and on compatibility with human keratinocytes showed that the polymers with the longest R groups and lowest DMAA content were the most antimicrobial and hemolytic. This is in agreement with the biological activity of previously reported SMAMPs. Thus, the design concept of facial amphiphilicity has successfully been transferred, but the selectivity of these polymers for bacteria over mammalian cells still needs to be optimized.

Polymeric Biomaterials: Diverse Functions Enabled by Advances in Macromolecular Chemistry

Biomaterials have been extensively used to leverage beneficial outcomes in various therapeutic applications, such as providing spatial and temporal control over the release of therapeutic agents in drug delivery as well as engineering functional tissues and promoting the healing process in tissue engineering and regenerative medicine. This perspective presents important milestones in the development of polymeric biomaterials with defined structures and properties. Contemporary studies of biomaterial design have been reviewed with focus on constructing materials with controlled structure, dynamic functionality, and biological complexity. Examples of these polymeric biomaterials enabled by advanced synthetic methodologies, dynamic chemistry/assembly strategies, and modulated cell-material interactions have been highlighted. As the field of polymeric biomaterials continues to evolve with increased sophistication, current challenges and future directions for the design and translation of these materials are also summarized.

Relating structure and internalization for ROMP-based protein mimics

Elucidating the predominant cellular entry mechanism for protein transduction domains (PTDs) and their synthetic mimics (PTDMs) is a complicated problem that continues to be a significant source of debate in the literature. The PTDMs reported here provide a well-controlled platform to vary molecular composition for structure activity relationship studies to further our understanding of PTDs, their non-covalent association with cargo, and their cellular internalization pathways. Specifically, several guanidine rich homopolymers, along with an amphiphilic block copolymer were used to investigate the relationship between structure and internalization activity in HeLa cells, both alone and non-covalently complexed with EGFP by flow cytometery and confocal imaging. The findings indicate that while changing the amount of positive charge on our PTDMs does not seem to affect the endosomal uptake, the presence of hydrophobicity appears to be a critical factor for the polymers to enter cells either alone, or with associated cargo.

Reactivity of norbornene esters in ring-opening metathesis polymerization initiated by a N-chelating Hoveyda II type catalyst

The reactivity and activation parameters for the ROMP of eight norbornene esters in the presence of a N-chelating Hoveyda–Grubbs II type catalyst were determined. Kinetic studies prove that these parameters highly depend on the monomer structures.

Antimicrobial activities of phosphonium containing polynorbornenes

In this study, amphiphilic polyoxanorbornene with different alkyl and aromatic phosphonium side chains was synthesized and investigated their biocidal properties.

Antimicrobial and cell-compatible surface-attached polymer networks - how the correlation of chemical structure to physical and biological data leads to a modified mechanism of action

We present a synthetic platform based on photo-induced thiol-ene chemistry, by which surface-attached networks from antimicrobial poly(oxonorbornene) (so-called polymeric synthetic mimics of antimicrobial peptides, SMAMPs) could be easily obtained. By systematically varying hydrophobicity and charge density, surface-attached polymer networks with high antimicrobial activity and excellent cell compatibility were obtained. For the homopolymer networks with constant charge density, antimicrobial activity increased systematically with increasing hydrophobicity (i.e. decreasing swellability and apparent surface energy). Irrespective of charge density, the antimicrobial activity of all networks correlated with the acid constant pK and the isoelectric point (IEP) - the lower pK and IEP, the higher the antimicrobial activity. The cell compatibility of the networks increased with increasing swellability and apparent surface energy, and decreased with increasing charge density. The data corroborates that the mechanism of action of antimicrobial polymer surfaces depends on at least two mechanistic steps, one of which is hydrophobicity-driven and the other charge related. Therefore, we suggest a modified mechanistic model with a charge-driven and a hydrophobicity-driven step. For antimicrobial networks that only varied in hydrophobicity, the antimicrobial activities on surfaces and in solution also correlated - the higher the activity in solution, the higher the activity on surfaces. Thus, the hydrophobicity-driven step for activity on surfaces may be similar to the one in solution. Cell compatibility of SMAMPs in solution and on surfaces also showed a systematic positive correlation for all polymers, therefore this property also depends on the net hydrophobic balance of the polymer.

Affinity-mediated capture and release of amphiphilic copolymers for controlling antimicrobial activity

Capture and release of amphiphilic copolymers by a nano-sized polysaccharide gel (nanogel) was controlled by altering the hydrophobic binding affinity between the copolymer chains and nanogel.

Unique norbornene based triazole molecule for selective Fe(ii) sensing

A triazole functionalized norbornene monomer (NFTZ) and its corresponding homopolymer (NFTZH) are synthesized for selective Fe(ii) sensing.

Labelling Polymers and Micellar Nanoparticles via Initiation, Propagation and Termination with ROMP

In this paper we compare and contrast three approaches for labelling polymers with functional groups via ring-opening metathesis polymerization (ROMP). We explored the incorporation of functionality via initiation, termination and propagation employing an array of novel initiators, termination agents and monomers. The goal was to allow the generation of selectively labelled and well-defined polymers that would in turn lead to the formation of labelled nanomaterials. Norbornene analogues, prepared as functionalized monomers for ROMP, included fluorescent dyes (rhodamine, fluorescein, EDANS, and coumarin), quenchers (DABCYL), conjugatable moieties (NHS esters, pentafluorophenyl esters), and protected amines. In addition, a set of symmetrical olefins for terminally labelling polymers, and for the generation of initiators in situ is described.

One-pot polymer brush synthesis via simultaneous isocyanate coupling chemistry and “grafting from” RAFT polymerization

One-pot ‘grafting from’ of polystyrene on polydopamine particles was investigated using a newly developed carbonyl-azide reversible addition–fragmentation chain transfer (RAFT) agent.

Nanoparticles produced by ring-opening metathesis polymerization using norbornenyl-poly(ethylene oxide) as a ligand-free generic platform for highly selective in vivo tumor targeting

We described a norbornenyl-poly(ethylene oxide) nanoparticles ligand-free generic platform, made fluorescent with straightforward preparation by ring-opening metathesis polymerization (ROMP). Our method allowed to easily obtain a drug delivery system (DDS) with facilitated functionalization by means of azide-alkyne click chemistry and with a high selectivity for the tumor in vivo, while cellular internalization is obtained without cell targeting strategy. We demonstrated that our nanoparticles are internalized by endocytosis and colocalized with acidic intracellular compartments in two models of aggressive tumoral cell lines with low prognostic and limited therapeutic treatments. Our nanoparticles could be of real interest to limit the toxicity and to increase the clinical benefit of drugs suffering rapid clearance and side effects and an alternative for cancers with poorly efficient therapeutic solutions by associating the drug delivery in the tumor tissue with an acid-sensitive release system.

End-labeled amino terminated monotelechelic glycopolymers generated by ROMP and Cu(I)-catalyzed azide-alkyne cycloaddition

Functionalizable monotelechelic polymers are useful materials for chemical biology and materials science. We report here the synthesis of a capping agent that can be used to terminate polymers prepared by ring-opening metathesis polymerization of norbornenes bearing an activated ester. The terminating agent is a cis-butene derivative bearing a Teoc (2-trimethylsilylethyl carbamate) protected primary amine. Post-polymerization modification of the polymer was accomplished by amidation with an azido-amine linker followed by Cu(I)-catalyzed azide–alkyne cycloaddition with propargyl sugars. Subsequent Teoc deprotection and conjugation with pyrenyl isothiocyanates afforded well-defined end-labeled glycopolymers.

Luminescent Iridium(III)-Containing Block Copolymers: Self-Assembly into Biotin-Labeled Micelles for Biodetection Assays

Luminescent polymers containing Ir(ppy)₂(bpy) PF₆ complexes, biocompatible poly(ethylene glycol) (PEG) chains, and biotin moieties were synthesized via ring-opening metathesis polymerization (ROMP). Their self-assembly in water into micelles resulted in an increased quantum yield compared to open polymer chains in acetonitrile, which is likely due to core rigidity and desolvation. Streptavidin coated magnetic beads were employed to analyze the binding ability of these micelles. The positioning of the molecular recognition moiety biotin within the polymer chain had a very significant effect on the availability of biotin on the micelle surface and the ability of the micelles to bind to streptavidin. Simply attaching biotin to the end of the ROMP polymer yielded micelles in which the biotin units were shielded by the PEG chains, whereas the synthesis of a new ROMP monomer containing biotin at the end of the PEG chains resulted in improved surface availability of the biotin group. Preliminary experiments in which streptavidin was microcontact-printed onto functionalized glass coverslips also indicated specific binding between the micelles and streptavidin and further demonstrated the potential of these micelle systems to function as luminescent probes in solid-phase biodetection assays.