Ionic Conductivity, Capacitance, and Viscoelastic Properties of Block Copolymer-Based Ion Gels

Supramolecular Association of a Block Copolymer via Strong Hydrogen Bonding to Form Self-Healable Ionogels

The drive to enhance the operational durability and reliability of stretchable and wearable electronic and electrochemical devices has led to the exploration of self-healing materials that can recover from both physical and functional failures. In the present study, we fabricated a self-healable solid polymer electrolyte, referred to as an ionogel, using reversible hydrogen bonding between the ureidopyrimidone units of a block copolymer (BCP) network swollen in an ionic liquid (IL). The BCP consisted of poly(styrene-b-(methyl acrylate-r-ureidopyrimidone methacrylate)) [poly(S-b-(MA-r-UPyMA)], with the IL-phobic polystyrene forming micellar cores that were interconnected via intercorona hydrogen bonding between the ureidopyrimidone units. By precisely regulating the molecular weight and the composition of the hydrogen-bondable motifs, the mechanical, electrical, and self-healing characteristics of the ionogel were systematically evaluated. The resulting ionogel samples exhibited suitable stretchability, ionic conductivity, and room-temperature self-healability due to reversible hydrogen bonding. To highlight the applicability of the self-healing ionogel as a high-capacitance gate insulator, an electrolyte-gated transistor (EGT) was fabricated using a poly(3-hexylthiophene-2,5-diyl) semiconductor, and the performance of the EGT was fully recovered from a complete cut without any external stimuli.

Conductive Gels for Energy Storage, Conversion, and Generation: Materials Design Strategies, Properties, and Applications

Gel-based materials have garnered significant interest in recent years, primarily due to their remarkable structural flexibility, ease of modulation, and cost-effective synthesis methodologies. Specifically, polymer-based conductive gels, characterized by their unique conjugated structures incorporating both localized sigma and pi bonds, have emerged as materials of choice for a wide range of applications. These gels demonstrate an exceptional integration of solid and liquid phases within a three-dimensional matrix, further enhanced by the incorporation of conductive nanofillers. This unique composition endows them with a versatility that finds application across a diverse array of fields, including wearable energy devices, health monitoring systems, robotics, and devices designed for interactive human-body integration. The multifunctional nature of gel materials is evidenced by their inherent stretchability, self-healing capabilities, and conductivity (both ionic and electrical), alongside their multidimensional properties. However, the integration of these multidimensional properties into a single gel material, tailored to meet specific mechanical and chemical requirements across various applications, presents a significant challenge. This review aims to shed light on the current advancements in gel materials, with a particular focus on their application in various devices. Additionally, it critically assesses the limitations inherent in current material design strategies and proposes potential avenues for future research, particularly in the realm of conductive gels for energy applications.

Block copolymer synthesis in ionic liquid via polymerisation-induced self-assembly: a convenient route to gel electrolytes

We report for the first time a reversible addition-fragmentation chain transfer polymerisation-induced self-assembly (RAFT-PISA) formulation in ionic liquid (IL) that yields worm gels. A series of poly(2-hydroxyethyl methacrylate)-b-poly(benzyl methacrylate) (PHEMA-b-PBzMA) block copolymer nanoparticles were synthesised via RAFT dispersion polymerisation of benzyl methacrylate in the hydrophilic IL 1-ethyl-3-methyl imidazolium dicyanamide, [EMIM][DCA]. This RAFT-PISA formulation can be controlled to afford spherical, worm-like and vesicular nano-objects, with free-standing gels being obtained over a broad range of PBzMA core-forming degrees of polymerisation (DPs). High monomer conversions (≥96%) were obtained within 2 hours for all PISA syntheses as determined by 1H NMR spectroscopy, and good control over molar mass was confirmed by gel permeation chromatography (GPC). Nanoparticle morphologies were identified using small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM), and further detailed characterisation was conducted to monitor rheological, electrochemical and thermal characteristics of the nanoparticle dispersions to assess their potential in future electronic applications. Most importantly, this new PISA formulation in IL facilitates the in situ formation of worm ionogel electrolyte materials at copolymer concentrations >4% w/w via efficient and convenient synthesis routes without the need for organic co-solvents or post-polymerisation processing/purification. Moreover, we demonstrate that the worm ionogels developed in this work exhibit comparable electrochemical properties and thermal stability to that of the IL alone, showcasing their potential as gel electrolytes.

Optimizing the Ion Conductivity and Mechanical Stability of Polymer Electrolyte Membranes Designed for Use in Lithium Ion Batteries: Combining Imidazolium-Containing Poly(ionic liquids) and Poly(propylene carbonate)

State-of-the-art Li batteries suffer from serious safety hazards caused by the reactivity of lithium and the flammable nature of liquid electrolytes. This work develops highly efficient solid-state electrolytes consisting of imidazolium-containing polyionic liquids (PILs) and lithium bis(trifluoromethane sulfonyl)imide (LiTFSI). By employing PIL/LiTFSI electrolyte membranes blended with poly(propylene carbonate) (PPC), we addressed the problem of combining ionic conductivity and mechanical properties in one material. It was found that PPC acts as a mechanically reinforcing component that does not reduce but even enhances the ionic conductivity. While pure PILs are liquids, the tricomponent PPC/PIL/LiTFSI blends are rubber-like materials with a Young's modulus in the range of 100 MPa. The high mechanical strength of the material enables fabrication of mechanically robust free-standing membranes. The tricomponent PPC/PIL/LiTFSI membranes have an ionic conductivity of 10-6 S·cm-1 at room temperature, exhibiting conductivity that is two orders of magnitude greater than bicomponent PPC/LiTFSI membranes. At 60 °C, the conductivity of PPC/PIL/LiTFSI membranes increases to 10-5 S·cm-1 and further increases to 10-3 S·cm-1 in the presence of plasticizers. Cyclic voltammetry measurements reveal good electrochemical stability of the tricomponent PIL/PPC/LiTFSI membrane that potentially ranges from 0 to 4.5 V vs. Li/Li+. The mechanically reinforced membranes developed in this work are promising electrolytes for potential applications in solid-state batteries.

A biocompatible electrolyte enables highly reversible Zn anode for zinc ion battery

Progress towards the integration of technology into living organisms requires power devices that are biocompatible and mechanically flexible. Aqueous zinc ion batteries that use hydrogel biomaterials as electrolytes have emerged as a potential solution that operates within biological constraints; however, most of these batteries feature inferior electrochemical properties. Here, we propose a biocompatible hydrogel electrolyte by utilising hyaluronic acid, which contains ample hydrophilic functional groups. The gel-based electrolyte offers excellent anti-corrosion ability for zinc anodes and regulates zinc nucleation/growth. Also, the gel electrolyte provides high battery performance, including a 99.71% Coulombic efficiency, over 5500 hours of long-term stability, improved cycle life of 250 hours under a high zinc utilization rate of 80%, and high biocompatibility. Importantly, the Zn//LiMn2O4 pouch cell exhibits 82% capacity retention after 1000 cycles at 3 C. This work presents a promising gel chemistry that controls zinc behaviour, offering great potential in biocompatible energy-related applications and beyond.

Dynamic Metal-Ligand Coordination-Assisted Ionogels for Deformable Alternating Current Electroluminescent Devices

Overcoming the trade-off between the mechanical robustness and conductivity of ionic conductors is a crucial challenge for deformable ionotronics. In this work, we propose a simple but effective gelation strategy for selectively improving the mechanical robustness of ionogels without compromising their ionic conductivity. To achieve this, we introduce dynamic metal-ligand coordination chemistry into the ionic liquid (IL)-insoluble domains of a physically crosslinked ionogel network structure. As a result, the overall mechanical property is remarkably improved with the aid of additional chemical crosslinking. This strategy does not require any additional heat/light (UV) treatments to induce chemical crosslinking. The homogeneous physically/chemically dual crosslinked ionogel films can be readily obtained by simply casting a solution containing Ni²⁺ sources, copolymer gelators, and ILs. The effects of adjusting fundamental parameters on the ionogel properties are investigated systematically. The optimized mechanically robust and highly conductive ionogels are successfully employed as deformable ionic electrodes in alternating-current electroluminescent displays, indicating their high practicality. Overall, these results validate that exploiting metal-ligand coordination dynamic bonding is an extremely straightforward strategy for selectively improving the mechanical characteristics of conductive ionogels, which are promising platforms for deformable ionotronics.

Graphene-Enhanced Ion Transport in Dual-Conducting Composite Films of Polyacetylene and an Imidazolium Iodide Ionic Liquid

Dual-conducting polymer films were synthesized by dispersing graphene in an aqueous solution of poly(vinyl alcohol) and 1-propyl-3-methylimidazolium iodide ([C₃mim]I) ionic liquid and thermally converting the poly(vinyl alcohol) to polyene in the presence of hydroiodic acid catalyst. The electrical and mechanical properties of the resulting free-standing films of the nanocomposite, containing different concentrations of graphene, were analyzed using electrochemical impedance spectroscopy (EIS) and dynamic mechanical analysis (DMA), respectively. Nyquist plots (imaginary vs real components of the frequency-dependent impedance) showed two characteristic arcs representing the composite's electronic and ionic conduction pathways. The conductivity values corresponding to both charge transport mechanisms increased with temperature and the graphene concentration. The enhancement in electronic conductivity is expected because of graphene's high electron mobility. Interestingly, ionic conductivity also showed a significant increase with graphene concentration, approximately triple the extent of the rise in the electronic conductivity, even though the loss and storage moduli of the films increased. (Generally, a higher modulus results in lower ionic conductivities in ionic gels.) Molecular dynamics simulations of the three-component system provided some insights into this unusual behavior. Mean square displacement data showed that the diffusion of the iodide anions was relatively isotropic. The iodide diffusion coefficient was higher in a blend with 5 vol % graphene than in blends with 3 vol % graphene or no graphene. The improvement is attributed to the interfacial effects of the graphene on the free volume of the blend. Furthermore, an exclusion of the iodide ions from the vicinity of graphene was observed in the radial distribution function analysis. The increase in the effective concentration of iodide due to this exclusion and the increase in its diffusion coefficient because of the excess free volume are the primary reasons for the observed enhancement in ionic conductivity by adding graphene.

Ultrasensitive Ionic Liquid Polymer Composites with a Convex and Wrinkled Microstructure and Their Application as Wearable Pressure Sensors

The development of pressure sensors with high sensitivity and effectiveness that exhibit linearity over a wide pressure range is crucial for wearable devices. In this study, we fabricated a novel ionic liquid (IL)/polymer composite with a convex and randomly wrinkled microstructure in a cost-effective and facile manner using an opaque glass and stretched polydimethylsiloxane template. The fabricated IL/polymer composite was used as the dielectric layer in a capacitive pressure sensor. The sensor exhibited a high linear sensitivity of 56.91 kPa^-1 owing to the high interfacial capacitance formed by the electrical double layer of the IL/polymer composite over a relatively wide range (0-80 kPa). We also demonstrated the sensor performance for various applications such as a glove-attached sensor, sensor array, respiration monitoring mask, human pulse, blood pressure measurement, human motion detection, and a wide range of pressure sensing. It would be expected that the proposed pressure sensor has sufficient potential for use in wearable devices.

Ionic dielectrics for fully printed carbon nanotube transistors: impact of composition and induced stresses

Printed carbon nanotube thin-film transistors (CNT-TFTs) are candidates for flexible electronics with printability on a wide range of substrates. Among the layers comprising a CNT-TFT, the gate dielectric has proven most difficult to additively print owing to challenges in film uniformity, thickness, and post-processing requirements. Printed ionic dielectrics show promise for addressing these issues and yielding devices that operate at low voltages thanks to their high-capacitance electric double layers. However, the printing of ionic dielectrics in their various compositions is not well understood, nor is the impact of certain stresses on these materials. In this work, we studied three compositionally distinct ionic dielectrics in fully printed CNT-TFTs: the polar-fluorinated polymer elastomer PVDF-HFP; an ion gel consisting of triblock polymer PS-PMMA-PS and ionic liquid EMIM-TFSI; and crystalline nanocellulose (CNC) with a salt concentration of 0.05%. Although ion gel has been thoroughly studied, e-PVDF-HFP and CNC printing are relatively new and this study provides insights into their ink formulation, print processing, and performance as gate dielectrics. Using a consistent aerosol jet printing approach, each ionic dielectric was printed into similar CNT-TFTs, allowing for direct comparison through extensive characterization, including mechanical and electrical stress tests. The ionic dielectrics were found to have distinct operational dependencies based on their compositional and ionic attributes. Overall, the results reveal a number of trade-offs that must be managed when selecting a printable ionic dielectric, with CNC showing the strongest performance for low-voltage operation but the ion gel and elastomer exhibiting better stability under bias and mechanical stresses.

Ionic Liquid-Based Polymer Nanocomposites for Sensors, Energy, Biomedicine, and Environmental Applications: Roadmap to the Future

Current interest toward ionic liquids (ILs) stems from some of their novel characteristics, like low vapor pressure, thermal stability, and nonflammability, integrated through high ionic conductivity and broad range of electrochemical strength. Nowadays, ionic liquids represent a new category of chemical-based compounds for developing superior and multifunctional substances with potential in several fields. ILs can be used in solvents such as salt electrolyte and additional materials. By adding functional physiochemical characteristics, a variety of IL-based electrolytes can also be used for energy storage purposes. It is hoped that the present review will supply guidance for future research focused on IL-based polymer nanocomposites electrolytes for sensors, high performance, biomedicine, and environmental applications. Additionally, a comprehensive overview about the polymer-based composites' ILs components, including a classification of the types of polymer matrix available is provided in this review. More focus is placed upon ILs-based polymeric nanocomposites used in multiple applications such as electrochemical biosensors, energy-related materials, biomedicine, actuators, environmental, and the aviation and aerospace industries. At last, existing challenges and prospects in this field are discussed and concluding remarks are provided.

Multimodal Sensors with Decoupled Sensing Mechanisms

Highly sensitive and multimodal sensors have recently emerged for a wide range of applications, including epidermal electronics, robotics, health-monitoring devices and human-machine interfaces. However, cross-sensitivity prevents accurate measurements of the target input signals when a multiple of them are simultaneously present. Therefore, the selection of the multifunctional materials and the design of the sensor structures play a significant role in multimodal sensors with decoupled sensing mechanisms. Hence, this review article introduces varying methods to decouple different input signals for realizing truly multimodal sensors. Early efforts explore different outputs to distinguish the corresponding input signals applied to the sensor in sequence. Next, this study discusses the methods for the suppression of the interference, signal correction, and various decoupling strategies based on different outputs to simultaneously detect multiple inputs. The recent insights into the materials' properties, structure effects, and sensing mechanisms in recognition of different input signals are highlighted. The presence of the various decoupling methods also helps avoid the use of complicated signal processing steps and allows multimodal sensors with high accuracy for applications in bioelectronics, robotics, and human-machine interfaces. Finally, current challenges and potential opportunities are discussed in order to motivate future technological breakthroughs.

Phase-locked constructing dynamic supramolecular ionic conductive elastomers with superior toughness, autonomous self-healing and recyclability

Stretchable ionic conductors are considerable to be the most attractive candidate for next-generation flexible ionotronic devices. Nevertheless, high ionic conductivity, excellent mechanical properties, good self-healing capacity and recyclability are necessary but can be rarely satisfied in one material. Herein, we propose an ionic conductor design, dynamic supramolecular ionic conductive elastomers (DSICE), via phase-locked strategy, wherein locking soft phase polyether backbone conducts lithium-ion (Li⁺) transport and the combination of dynamic disulfide metathesis and stronger supramolecular quadruple hydrogen bonds in the hard domains contributes to the self-healing capacity and mechanical versatility. The dual-phase design performs its own functions and the conflict among ionic conductivity, self-healing capability, and mechanical compatibility can be thus defeated. The well-designed DSICE exhibits high ionic conductivity (3.77 × 10⁻³ S m⁻¹ at 30 °C), high transparency (92.3%), superior stretchability (2615.17% elongation), strength (27.83 MPa) and toughness (164.36 MJ m⁻³), excellent self-healing capability (~99% at room temperature) and favorable recyclability. This work provides an interesting strategy for designing the advanced ionic conductors and offers promise for flexible ionotronic devices or solid-state batteries.

Stretchable ionic conductors are attractive candidates for flexible ionotronics but combining high conductivity with excellent mechanical properties is challenging. Herein, the authors combine these properties in a dynamic supramolecular ionic conductive elastomer enabling lithium-ion transport in the soft phase and dynamic disulfide and supramolecular hydrogen bonding in the hard segments.

Anisotropic Alignment of Bacterial Nanocellulose Ionogels for Unconventionally High Combination of Stiffness and Damping

Ionogels are emerging materials for advanced electrochemical devices; however, their mechanical instability to external stresses has raised concerns about their safety. This study reports aligned bacterial nanocellulose (BC) ionogel films swelled with the model ionic liquid (IL) of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF₄) for an unprecedented combination of high stiffness and high energy dissipation without significant loss of ionic conductivity. The aligned BC ionogel films are prepared through wet-state stretching methods, followed by drying and swelling by ILs. The aligned ionogel films exhibit significantly improved dynamic mechanical properties, overcoming the mechanical conventional limit of traditional materials by 2.0 times at 25 °C and by a maximum of 4.0 times at 0 °C. Additionally, the same samples exhibit relatively high ionic conductivities of 0.16 mS cm^-1 at 20 °C and 0.45 mS cm^-1 at 60 °C with storage moduli over 10 GPa. The synergistic effect of the mechanical reinforcements by alignment of the BC nanofibers and the plasticizing effects by ILs could be attributed to the significant enhancement of dynamic mechanical properties and the retention of ionic conductivities. These results will lead to a deeper understanding of the material design for mechanically superior ionogel systems with increasing demands for advanced electronic and electrochemical devices.

Soft nanoconfinement of ionic liquids in lyotropic liquid crystals

Nanoconfinement of ionic liquids (ILs) influences their physicochemical properties. In this study, we investigate the effect of soft nanoconfinement imposed by lyotropic liquid crystals (LLCs) on ILs. The LLC ion gels are obtained through self-assembly of a short chain block copolymer (BCP) of polyethylene-block-poly(ethylene oxide), PE-b-PEO, in ILs. The effect of confinement on the interaction of ions with PEO is investigated through electrochemical impedance spectroscopy (EIS) and carbon dioxide (CO₂) absorption measurements. The results show that the synergistic effect on the CO₂ absorption capacity of LLC ion gels takes place as a result of confinement. Formation of IL pathways through the LLC increases the CO₂ solubility, absorption capacity, and absorption rate. Increasing the concentration of block copolymer in the LLC structure enhances the dissociation of ILs and consequently lowers CO₂ absorption. Therefore, the competing effects of confinement and IL-PEO interaction control the properties of LLC ion gels.

Sequence-Engineering Polyethylene-Polypropylene Copolymers with High Thermal Conductivity Using a Molecular-Dynamics-Based Genetic Algorithm

Polymer sequence engineering is emerging as a potential tool to modulate material properties. Here, we employ a combination of a genetic algorithm (GA) and atomistic molecular dynamics (MD) simulation to design polyethylene-polypropylene (PE-PP) copolymers with the aim of identifying a specific sequence with high thermal conductivity. PE-PP copolymers with various sequences at the same monomer ratio are found to have a broad distribution of thermal conductivities. This indicates that the monomer sequence has a crucial effect on thermal energy transport of the copolymers. A non-periodic and non-intuitive optimal sequence is indeed identified by the GA, which gives the highest thermal conductivity compared with any regular block copolymers, for example, diblock, triblock, and hexablock. In comparison to the bulk density, chain conformations, and vibrational density of states, the monomer sequence has the strongest impact on the efficiency of thermal energy transport via inter- and intra-molecular interactions. Our work highlights polymer sequence engineering as a promising approach for tuning the thermal conductivity of copolymers, and it provides an example application of integrating atomistic MD modeling with the GA for computational material design.

Multilayer Double-Sided Microstructured Flexible Iontronic Pressure Sensor with a Record-wide Linear Working Range

Wearable electronics, electronic skins, and human-machine interfaces demand flexible sensors with not only high sensitivity but also a wide linear working range. The latter remains a great challenge and has become a big hurdle for some of the key advancements imperative to these fields. Here, we present a flexible capacitive pressure sensor with ultrabroad linear working range and high sensitivity. The dielectric layer of the sensor is composed of multiple layers of double-sided microstructured ionic gel films. The multilayered structure and the gaps between adjacent films with random topography and size enhance the compressibility of the sensor and distribute the stress evenly to each layer, enabling a linear working range from 0.013 to 2063 kPa. Also, the densely distributed protrusive microstructures in the electric double layer contribute to a sensitivity of 9.17 kPa^-1 for the entire linear working range. For the first time, a highly sensitive pressure sensor that can measure loading conditions across 6 orders of magnitude is demonstrated. With the consistent and stable performance from a low- to high-measurement range, the proposed pressure sensor can be used in many applications without the need for recalibration to suit different loading scenarios.

Self-Healing and Highly Stretchable Hydrogel for Interfacial Compatible Flexible Paper-Based Micro-Supercapacitor

Most reported wearable electronic devices lack self-healing chemistry and flexible function to maintain stable energy output while irreversible damages and complex deformations. In this work, we report a dual-dynamic network electrolyte synthesized by micellar elastomers introduced into strong hydrogel matrix. The gel electrolyte is fabricated by physically cross-linking the borax-polyvinyl alcohol (B-PVA) network as tough matrix and poly (ethylene oxide) (PEO)-poly (propylene oxide) (PPO)-poly (ethylene oxide) (Pluronic) to frame elastic network, followed by immersion in potassium chloride solution. Under the action of dynamic borate ester bond and multi-network hydrogen bond, the as-prepared electrolyte exhibits high stretchability (1535%) and good self-healing efficiency. Based on the electrolyte, we assemble the interfacial compatible micro-supercapacitor (MSC) by multi-walled carbon nanotubes (MWCNT) interdigital electrode printed on cellulosic paper by direct ink writing (DIW) technique. Thanks to the large specific area and compressive deformation resistance of cellulosic paper, the MSC with tightly interfacial contact achieves high volumetric capacitance of 801.9 mF cm⁻³ at the current density of 20 μA cm⁻². In the absence of stimulation of the external environment, the self-healing MSC demonstrates an ideal capacity retention (90.43%) after five physical damaged/healing cycles. Our research provides a clean and effective strategy to construct wearable MSC.

Hydrogen-Bond-Triggered Hybrid Nanofibrous Membrane-Based Wearable Pressure Sensor with Ultrahigh Sensitivity over a Broad Pressure Range

Recently, flexible capacitive pressure sensors have received significant attention in the field of wearable electronics. The high sensitivity over a wide linear range combined with long-term durability is a critical requirement for the fabrication of reliable pressure sensors for versatile applications. Herein, we propose a special approach to enhance the sensitivity and linearity range of a capacitive pressure sensor by fabricating a hybrid ionic nanofibrous membrane as a sensing layer composed of Ti₃C₂T_x MXene and an ionic salt of lithium sulfonamides in a poly(vinyl alcohol) elastomer matrix. The reversible ion pumping triggered by a hydrogen bond in the hybrid sensing layer leads to high sensitivities of 5.5 and 1.5 kPa^-1 in the wide linear ranges of 0-30 and 30-250 kPa, respectively, and a fast response time of 70.4 ms. In addition, the fabricated sensor exhibits a minimum detection limit of 2 Pa and high durability over 20 000 continuous cycles even under a high pressure of 45 kPa. These results indicate that the proposed sensor can be potentially used in mobile medical monitoring devices and next-generation artificial e-skin.

Capacitance Effects of a Hydrophobic-Coated Ion Gel Dielectric on AC Electrowetting

We present experimental studies of alternating current (AC) electrowetting dominantly influenced by several unique characteristics of an ion gel dielectric in its capacitance. At a high-frequency region above 1 kHz, the droplet undergoes the contact angle modification. Due to its high-capacitance characteristic, the ion gel allows the contact angle change as large as Δθ = 26.4°, more than 2-fold improvement, compared to conventional dielectrics when f = 1 kHz. At the frequency range from 1 to 15 kHz, the capacitive response of the gel layer dominates and results in a nominal variation in the angle change as θ ≈ 90.9°. Above 15 kHz, such a capacitive response of the gel layer sharply decreases and leads to the drastic increase in the contact angle. At a low-frequency region below a few hundred Hz, the droplet’s oscillation relying on the AC frequency applied was mainly observed and oscillation performance was maximized at corresponding resonance frequencies. With the high-capacitance feature, the ion gel significantly enlarges the oscillation performance by 73.8% at the 1st resonance mode. The study herein on the ion gel dielectric will help for various AC electrowetting applications with the benefits of mixing enhancement, large contact angle modification, and frequency-independent control.

Formation of ion gels by polymerization of block copolymer/ionic liquid/oil mesophases

In this study, we introduce a new method of developing ion gels through polymerization of lyotropic liquid crystal (LLC) templates of monomer (styrene), cross-linker (divinylbenzene), ionic liquid (1-ethyl-3-methylimidazolium tetrafluoroborate), and amphiphilic block copolymers (Pluronic F127). The polymerization of the oil phase boosts the mechanical properties of the ion-conducting electrolytes. We discuss the effect of tortuosity induced by crystalline domains and LLC structure on the conductivity of ion gels. The ion transport in polymerized LLCs (polyLLCs) can be controlled by changing the composition of the mesophases. Increasing the block copolymer concentration enhances the crystallinity of PEO blocks in the conductive domains, which slows down the dynamics of PEO chain and ion transport. We show that by adjusting the composition of LLC mesophases, the mechanical strength of ion gels can be increased one order of magnitude without compromising the ionic conductivity. The polyLLCs with 45/25/30 wt% (block copolymer/IL/oil) composition has storage modulus and ionic conductivity higher than 1 MPa and 3 mS cm-1 at 70 °C, respectively. The results suggest that LLC templating is a promising method to develop highly conductive ion gels, which provides advantages in terms of variety and processing.

Temperature-resilient solid-state organic artificial synapses for neuromorphic computing

Devices with tunable resistance are highly sought after for neuromorphic computing. Conventional resistive memories, however, suffer from nonlinear and asymmetric resistance tuning and excessive write noise, degrading artificial neural network (ANN) accelerator performance. Emerging electrochemical random-access memories (ECRAMs) display write linearity, which enables substantially faster ANN training by array programing in parallel. However, state-of-the-art ECRAMs have not yet demonstrated stable and efficient operation at temperatures required for packaged electronic devices (~90°C). Here, we show that (semi)conducting polymers combined with ion gel electrolyte films enable solid-state ECRAMs with stable and nearly temperature-independent operation up to 90°C. These ECRAMs show linear resistance tuning over a >2× dynamic range, 20-nanosecond switching, submicrosecond write-read cycling, low noise, and low-voltage (±1 volt) and low-energy (~80 femtojoules per write) operation combined with excellent endurance (>10⁹ write-read operations at 90°C). Demonstration of these high-performance ECRAMs is a fundamental step toward their implementation in hardware ANNs.

Nofal M, Karim WO, Brevik I, Brza MA, Abdulwahid RT, Al-Zangana S, Kadir MFZ. Structural, Impedance and Electrochemical Characteristics of Electrical Double Layer Capacitor Devices Based on Chitosan: Dextran Biopolymer Blend Electrolytes

This report presents the preparation and characterizations of solid biopolymer blend electrolyte films of chitosan as cationic polysaccharide and anionic dextran (CS: Dextran) doped with ammonium iodide (NH4I) to be utilized as electrolyte and electrode separator in electrical double-layer capacitor (EDLC) devices. FTIR and XRD techniques were used to study the structural behavior of the films. From the FTIR band analysis, shifting and broadening of the bands were observed with increasing salt concentration. The XRD analysis indicates amorphousness of the blended electrolyte samples whereby the peaks underwent broadening. The analysis of the impedance spectra emphasized that incorporation of 40 wt.% of NH4I salt into polymer electrolyte exhibited a relatively high conductivity (5.16 × 10-3 S/cm). The transference number measurement (TNM) confirmed that ion (tion = 0.928) is the main charge carriers in the conduction process. The linear sweep voltammetry (LSV) revealed the extent of durability of the relatively high conducting film which was 1.8 V. The mechanism of charge storage within the fabricated EDLC has been explained to be fully capacitive behavior with no redox peaks appearance in the cyclic voltammogram (CV). From this findings, four important parameters of the EDLC; specific capacitance, equivalent series resistance, energy density and power density were calculated as 67.5 F/g, 160 ohm, 7.59 Wh/kg and 520.8 W/kg, respectively.

Recent progress in self-healable ion gels

Ion gels, soft materials that contain ionic liquids (ILs), are promising gel electrolytes for use in electrochemical devices. Due to the recent surge in demand for flexible and wearable devices, highly durable ion gels have attracted significant amounts of attention. In this review, we address recent advances in the development of ion gels that can heal themselves when mechanically damaged. Light- and thermally induced healing of ion gels are discussed as stimuli-responsive healing strategies, after which self-healable ion gels based on supramolecular and dynamic covalent chemistry are addressed. Tough, highly stretchable, and self-healable ion gels have recently been fabricated through the judicious design of polymer nanostructures in ILs in which polymer chains and IL cations and anions interact. The applications of self-healable ion gels to electrochemical devices are also briefly discussed.

Thermostable Ion Gels for High-Temperature Operation of Electrolyte-Gated Transistors

High-temperature durability is critical for application of organic materials in electronic devices that operate in harsh environments. In this work, thermostable physically cross-linked polymer electrolytes, or thermostable physical ion gels, were successfully developed using crystallization-induced phase separation of semicrystalline polyamides (PAs) in an ionic liquid (IL). In these ion gels, phase-separated PA crystals act as network junctions and enable the ion gels to maintain their mechanical integrity up to 180 °C. ILs and ion gels are suitable electrolyte candidates for thin-film devices operating at high temperatures because they outperform other electrolytes that use aqueous and organic solvents, owing to their superior thermal stability and nonvolatility. In addition to thermal stability, the PA gels exhibited high ionic conductivity (∼1 mS/cm) and specific capacitance (∼10 μF/cm²) at room temperature; these values increased significantly with increasing temperature, while the gel retained its solid-state mechanical integrity. These thermostable ion gels were successfully used as an electrolyte gate dielectric in organic thin-film transistors that operate at high temperatures (ca. 150 °C) and low voltages (<1 V). The transistors gated with the dielectrics had a high on/off current ratio of (3.04 ± 0.24) × 10⁵ and a hole mobility of 2.83 ± 0.20 cm²/V·s. By contrast, conventional physical ion gels based on semicrystalline polymers of poly(vinylidene fluoride-co-hexafluoropropylene) and polyvinylidene fluoride lost their mechanical integrity and dewetted from a semiconductor channel at lower temperatures. Therefore, these results demonstrate an effective method of generating thermally stable, mechanically robust, and highly conductive solid polymer electrolytes for electronic and electrochemical devices operating in a wide temperature range.

Self-healing behaviour of furan–maleimide poly(ionic liquid) covalent adaptable networks

Recovery of mechanical (tensile testing) and conductive (chronoamperometric cycling) properties was observed for PIL networks containing thermoreversible furan–maleimide crosslinks.

Free-Standing Ion-Conductive Gels Based on Polymerizable Imidazolium Ionic Liquids

A free-standing ion-conductive gel is formed by spontaneous self-assembly of the amphiphilic ionic liquid 1-tetradecyl-3-methylimidazolium chloride (C₁₄MIm·Cl) and the cross-linkable monomer 6-hexanediol diacrylate (HDODA) in a mixed solvent of 1-octene, 1-butanol, and water. The ionic conductivity of this ion gel is 24 mS cm^-1 at 33 °C. To enhance the mechanical strength of the ion gels, the acrylate ionic liquid 1-(2-acryloyloxyundecyl)-3-methylimidazolium bromide (A-C₁₁MIm·Br) was added, leading to significant morphological changes of the HDODA phase from spherical, ellipsoid, angular platelets to interconnected with increasing addition of the acrylate ionic liquid and consequent enhancement in the mechanical strength of the resulting ion gels. Small angle X-ray scattering data reveal that the ion gels are composed of bicontinuous phase. The formation of the anisotropic HDODA structures upon introduction of the acrylate ionic liquid was accompanied by a change of the bicontinuous phase to be undulated, which increased the ionic path through the formed film, resulting in reduced ionic conductivity. Such coaxial structured gels may be a promising route for developing highly ion-conductive as well as mechanically stable solid electrolyte systems.

Nanofibrillar Ionic Polymer Composites Enable High-Modulus Ion-Conducting Membranes

Polymer electrolyte membranes (PEMs) with high volume fractions of ionic liquids (IL) and high modulus show promise for enabling next-generation gas separations, and electrochemical energy storage and conversion applications. Herein, we present a conductive polymer-IL composite based on a sulfonated all-aromatic polyamide (sulfo-aramid, PBDT) and a model IL, which we term a PBDT-IL composite. The polymer forms glassy and high-aspect-ratio hierarchical nanofibrils, which enable fabrication of PEMs with both high volume fractions of IL and high elastic modulus. We report direct evidence for nanofibrillar networks that serve as matrices for dispersed ILs using atomic force microscopy and small- and wide-angle X-ray scattering. These supramolecular nanofibrils form through myriad noncovalent interactions to produce a physically cross-linked glassy network, which boasts the best combination of room-temperature modulus (0.1-2 GPa) and ionic conductivity (8-4 mS cm^-1) of any polymer-IL electrolyte reported to date. The ultrahigh thermomechanical properties of our PBDT-IL composites provide high moduli (∼1 GPa) at temperatures up to 200 °C, enabling a wide device operation window with stable mechanical properties. Together, the high-performance nature of sulfo-aramids in concert with the inherent properties of ILs imparts PBDT-IL composites with nonflammability and thermal stability up to 350 °C. Thus, nanofibrillar ionic networks based on sulfo-aramids and ILs represent a new design paradigm affording PEMs with exceptionally high moduli at exceedingly low polymer concentrations. This new design strategy will drive the development of new high-performance conductive membranes that can be used for the design of gas separation membranes and in electrochemical applications, such as fuel cells and Li-metal batteries.

Ion Gel Dynamic Templates for Large Modulation of Morphology and Charge Transport Properties of Solution-Coated Conjugated Polymer Thin Films

Dynamic surfaces play a critical role in templating highly ordered complex structures in living systems but are rarely employed for directing assembly of synthetic functional materials. We design ion gel templates with widely tunable dynamics ( T_g) to template solution-coated conjugated polymers. We hypothesize that the ion gel expedites polymer nucleation by reconfiguring its surface to facilitate cooperative multivalent interactions with the conjugated polymer, validated using both experimental and computational approaches. Varying ion gel dynamics enables large modulation of alignment, molecular orientation, and crystallinity in templated polymer thin films. At the optimal conditions, ion-gel-templated films exhibit 55 times higher dichroic ratio (grazing incidence X-ray diffraction) and 49% increase in the relative degree of crystallinity compared to those templated by the neat polymer matrix. As a result, the maximum hole mobilities increase by factors of 4 and 11 along the π-π stacking and the backbone directions. Intriguingly, we observe a synergistic effect between the gel matrix and the ionic liquid that produces markedly enhanced templating effect than either component alone. Molecular dynamics simulations suggest that complementary multivalent interactions facilitated by template reconfigurability underlie the observed synergy. We further demonstrate field-effect transistors both templated and gated by ion gels with average mobility exceeding 7 cm² V^-1 s^-1.

Star-Shaped Block Copolymers: Effective Polymer Gelators of High-Performance Gel Electrolytes for Electrochemical Devices

Ion gels composed of copolymers and ionic liquids (ILs) have attracted great interest as polymer gel electrolytes for various electrochemical applications. Here, we present highly robust ion gels based on a six-arm star-shaped block copolymer of (poly(methyl methacrylate)- b-polystyrene)₆ ((MS)₆) and an ionic liquid of 1-ethyl-3-methylimidazolium bis(trifluoromethyl sulfonyl)imide ([EMI][TFSI]). Compared to typical ion gels based on linear polystyrene- b-poly(methyl methacrylate)- b-polystyrene (SMS), the (MS)₆-based gels show mechanical moduli of more than twice under various strains (e.g., stretching, compression, and shear). In addition, the outstanding mechanical property is maintained even up to 180 °C without a gel-sol transition. To demonstrate that (MS)₆-based ion gels can serve as effective gel electrolytes for electrochemical applications, tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺), a representative electrochemiluminescent (ECL) luminophore, is incorporated into the gels. In particular, flexible ECL devices based on (MS)₆ gels exhibit high durability against bending deformation compared to devices with gels based on linear SMS having a similar molecular weight and a composition. This result implies that star-shaped block copolymers are effective gelators for achieving flexible/wearable electrochemical electronics.

Ultrasensitive Interfacial Capacitive Pressure Sensor Based on a Randomly Distributed Microstructured Iontronic Film for Wearable Applications

The rapid development of pressure sensors with distinct functionalities, notably, with increased sensitivity, fast response time, conformability, and a high degree of deformability, has increased the demand for wearable electronics. In particular, pressure sensors with an excellent sensitivity in the low-pressure range (<2 kPa) and a large working range simultaneously are strongly demanded for practical applications in wearable electronics. Here, we demonstrate an emerging class of solid polymer electrolyte obtained by incorporating a room-temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with poly(vinylidene fluoride- co-hexafluoropropylene) as a high-capacitance dielectric layer for interfacial capacitive pressure sensing applications. The solid polymer electrolyte exhibits a very high interfacial capacitance by virtue of mobile ions that serve as an electrical double layer in response to an electric field. The randomly distributed microstructures created on the solid electrolyte help the material to elastically deform under pressure. Moreover, the interfacial capacitance is improved by utilizing a highly conductive porous percolated network of silver nanowires reinforced with poly(dimethylsiloxane) as the electrodes. An ultrahigh-pressure sensitivity of 131.5 kPa^-1, a low dynamic response time of ∼43 ms, a low limit of detection of 1.12 Pa, and a high stability for over 7000 cycles are achieved. Finally, we demonstrate the application of the sensor for international Morse code detection, artery pulse detection, and eye blinking. Owing to the ultrahigh sensitivity, the as-fabricated sensor will have great potential for wearable devices in health status monitoring, motion detection, and electronic skin.

Mechanical and self-recovery properties of supramolecular ionic liquid elastomers based on host–guest interactions and correlation with ionic liquid content

Supramolecular materials have received considerable attention due to their higher fracture energy and self-recovery capability compared to conventional chemically cross-linked materials. Herein, we focus on the mechanical properties and self-recovery behaviours of supramolecular polymeric elastomers swollen with ionic liquid. We also gained insight into the correlation between ionic liquid content and mechanical properties. These supramolecular polymers with ionic liquid can be easily prepared from bulk copolymerization of the host–guest complex (peracetylated cyclodextrin and adamantane derivatives) and alkyl acrylates and subsequent immersion in ionic liquid such as 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. The supramolecular polymeric elastomers showed a self-recovery ability, which the conventional chemically cross-linked elastomers with ionic liquid cannot achieve.

Supramolecular ionic liquid elastomers showed higher fracture energy than chemically cross-linked ionic liquid elastomers and also self-recovery ability.

Dual-Function Electrochromic Supercapacitors Displaying Real-Time Capacity in Color

Dual-function electrochromic supercapacitors (ECSs) that indicate their real-time charge capacity in color are fabricated using tungsten trioxide (WO₃) and Li-doped ion gels containing hydroquinone (HQ). The ECSs can simultaneously serve as either electrochromic devices or supercapacitors. The coloration/bleaching and charging/discharging characteristics are investigated between 0 and -1.5 V. At the optimal HQ concentration, large transmittance contrast (∼91%), high coloration efficiency (∼61.9 cm²/C), high areal capacitance (∼13.6 mF/cm²), and good charging/discharging cyclic stability are achieved. Flexible ECSs are fabricated on plastic substrates by exploiting the elastic characteristics of the gel electrolytes, and they exhibit good bending durability. Moreover, practical feasibility is evaluated by demonstrating the use of the ECSs as an energy storage device and a power source.

Sub-2 V, Transfer-Stamped Organic/Inorganic Complementary Inverters Based on Electrolyte-Gated Transistors

Organic/inorganic hybrid complementary inverters operating at low voltages (1 V or less) were fabricated by transfer-stamping organic p-type poly(3-hexylthiophene) (P3HT) and inorganic n-type zinc oxide (ZnO) electrolyte-gated transistors (EGTs). A semicrystalline homopolymer-based gel electrolyte, or an ionogel, was also transfer-stamped on the semiconductors for use as a high-capacitance gate insulator. For the ionogel stamping, the thermoreversible crystallization of phase-separated homopolymer crystals, which act as network cross-links, was employed to improve the contact between the gel and the semiconductor channel. The homopolymer ionogel-gated P3HT transistor exhibited a high hole mobility of 2.81 cm²/(V s), and the ionogel-gated n-type ZnO transistors also showed a high electron mobility of 2.06 cm²/(V s). The transfer-stamped hybrid complementary inverter based on the P3HT and ZnO EGTs showed a low-voltage operation with appropriate inversion characteristics including a high voltage gain of ∼18. These results demonstrate that the transfer-stamping strategy provides a facile and reliable processing route for fabricating electrolyte-gated transistors and logic circuits.

Self-Healing Micellar Ion Gels Based on Multiple Hydrogen Bonding

Ion gels, composed of macromolecular networks filled by ionic liquids (ILs), are promising candidate soft solid electrolytes for use in wearable/flexible electronic devices. In this context, the introduction of a self-healing function would significantly improve the long-term durability of ion gels subject to mechanical loading. Nevertheless, compared to hydrogels and organogels, the self-healing of ion gels has barely investigated been because of there being insufficient understanding of the interactions between polymers and ILs. Herein, a new class of supramolecular micellar ion gel composed of a diblock copolymer and a hydrophobic IL, which exhibits self-healing at room temperature, is presented. The diblock copolymer has an IL-phobic block and a hydrogen-bonding block with hydrogen-bond-accepting and donating units. By combining the IL and the diblock copolymer, micellar ion gels are prepared in which the IL phobic blocks form a jammed micelle core, whereas coronal chains interact with each other via multiple hydrogen bonds. These hydrogen bonds between the coronal chains in the IL endow the ion gel with a high level of mechanical strength as well as rapid self-healing at room temperature without the need for any external stimuli such as light or elevated temperatures.

A supramolecular biomimetic skin combining a wide spectrum of mechanical properties and multiple sensory capabilities

Biomimetic skin-like materials, capable of adapting shapes to variable environments and sensing external stimuli, are of great significance in a wide range of applications, including artificial intelligence, soft robotics, and smart wearable devices. However, such highly sophisticated intelligence has been mainly found in natural creatures while rarely realized in artificial materials. Herein, we fabricate a type of biomimetic iontronics to imitate natural skins using supramolecular polyelectrolyte hydrogels. The dynamic viscoelastic networks provide the biomimetic skin with a wide spectrum of mechanical properties, including flexible reconfiguration ability, robust elasticity, extremely large stretchability, autonomous self-healability, and recyclability. Meanwhile, polyelectrolytes' ionic conductivity allows multiple sensory capabilities toward temperature, strain, and stress. This work provides not only insights into dynamic interactions and sensing mechanism of supramolecular iontronics, but may also promote the development of biomimetic skins with sophisticated intelligence similar to natural skins.

Influence of lithium salt-induced phase separation on thermal behaviors of poly(vinylidene fluoride)/ionic liquid gels and pore/void formation by competition with crystallization

The thermal behavior of poly(vinylidene fluoride)/1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide/lithium bis(trifluoromethylsulfonyl)amide (PVDF/[C₂mim][TFSA]/LiTFSA) gels, prepared by cooling from the hot solution, was investigated with various concentrations of LiTFSA (C_LiTFSA). The peak melting temperature (T_m) of the gels shifted toward higher temperatures with increased C_LiTFSA. However, the thickness of lamellar crystal was found to decrease with the increase in C_LiTFSA, which meant that the increase in T_m was not caused by the thickening of lamellar crystal. Furthermore, we found the appearance of domains above T_m in the high C_LiTFSA region (≥20 wt%), which was a lithium ion-rich phase caused by the phase separation. Therefore, it is considered on the basis of Nishi–Wang equation that an increase in the interaction parameter with increasing C_LiTFSA toward the phase separation increased the T_m. The phase-separated domains competed with the subsequent crystallization, which resulted in the formation of micrometer-sized pores and nanometer-sized voids in the spherulites. Spectral measurements revealed that PVDF was not specifically solvated in the solution state above the crystallization temperature, while [TFSA]⁻ anion formed a complex with lithium ion irrespective of the PVDF content. These results led to the consideration that an increase in the interaction parameter might be caused by the strong interaction between lithium ion and [TFSA]⁻ anion to form the complex, which would also lower the interaction between PVDF and [TFSA]⁻ anion.

Lithium salt-induced phase separation on thermal behaviors of PVDF/ionic liquid gels and pore/void structures formation by competition with crystallization.

The effect of the block ratio on the thermal conductivity of amorphous polyethylene–polypropylene (PE–PP) diblock copolymers

Block copolymers have a wide range of applications, such as battery electrolytes and nanoscale pattern generation.

Block copolymer self-assembly in ionic liquids

Recent developments in block copolymer self-assembly in ionic liquids are reviewed from both fundamental and applied aspects.