Triblock Copolymers with Grafted Fluorine-Free, Amphiphilic, Non-Ionic Side Chains for Antifouling and Fouling-Release Applications

Highly Stretchable and Self-Adhesive Elastomers Based on Polymer Chain Rearrangement for High-Performance Strain Sensors

Polydimethylsiloxane (PDMS) has been widely used in many fields. However, the polymerization process of the siloxane chain is highly complex, and it is challenging to enhance the mechanical properties of PDMS elastomers significantly. We found that adding a small amount of polyoxyethylene lauryl ether (Brij-35) into siloxane polymers can result in B-PDMS elastomers with high tensile properties and strong adhesion. It is worth noting that this is the first study to improve the mechanical properties of PDMS using Brij-35. Here, we intensely studied a variety of process conditions that influence the cross-linking of PDMS, emphasizing the modification mechanism of the polymer chain. The hydroxyl groups in Brij-35 and the platinum catalyst in PDMS form a complex, which inhibits the cross-linking process of PDMS, not only forming a heterogeneous cross-linking network in the B-PDMS but also disentangling the strongly wound siloxane polymer chain, thereby rearranging the PDMS polymer chains. Furthermore, in order to prepare a strain sensor based on the B-PDMS elastomer under safe and convenient conditions, we prepared laser-scribed graphene powder (LSGP) by laser-scribing of graphene oxide (GO) films, and the LSGP and carbon nanotubes (CNTs) endowed the B-PDMS elastomers with excellent electrical properties. The sensor could firmly adhere to the skin and generate a high-quality response to a variety of human motions, and it could drive the robotic hand to grasp and lift objects accurately. The high-performance strain sensors based on B-PDMS have broad applications in medical sensing and biopotential measurement.

A critical review on surface modifications mitigating dairy fouling

Thermal treatments performed in food processing industries generate fouling. This fouling deposit impairs heat transfer mechanism by creating a thermal resistance, thus leading to regular shutdown of the processes. Therefore, periodic and harsh cleaning-in-place (CIP) procedures are implemented. This CIP involves the use of chemicals and high amounts of water, thus increasing environmental burden. It has been estimated that 80% of production costs are owed to dairy fouling deposit. Since the 1970s, different types of surface modifications have been performed either to prevent fouling deposition (anti-fouling) or to facilitate removal (fouling-release). This review points out the impacts of surface modification on type A dairy fouling and on cleaning behaviors under batch and continuous flow conditions. Both types of anti-fouling and fouling-release coatings are reported as well as the different techniques used to modify stainless steel surface. Finally, methods for testing and characterising the effectiveness of coatings in mitigating dairy fouling are discussed.

Marine antifouling coatings with surface topographies triggered by phase segregation

Marine biofouling is a ubiquitous and longstanding challenge that causes both economic and environmental problems. To address this, several antifouling strategies have been proposed, such as the release of biocidal compounds or surface chemical/physical design. Here we report a coating with surface structures (chemical heterogeneity) triggered by phase segregation, which endues the good antifouling properties, alongside robust mechanical properties, low underwater oil adhesion, and excellent optical transparency. This is achieved by arranging the hydrophobic and hydrophilic components to control the assembly and phase separation under the cross-linking and localized swelling process. The structure designs are based on the poly(ethylene glycols) (PEG), zwitterions, and hydrophobic components, which may lower the entropic and enthalpic driving forces for the adsorption of the marine organisms. Our approach could provide an effective way of manufacturing novel coating with amphiphilic micro/nanodomains structure, particularly for the marine industry. And we also showed that the coatings were stable under different temperatures and shear environments. To illustrate the applicability of such a robust coating in marine biofouling, we demonstrated significantly reduced algal adhesion and barnacle attachment in the sea (p < 0.01). We envision that this work will provide great potential for the application in antifouling marine coatings.

One-Step and Low-Cost Designing of Two-Layered Active-Layer Superhydrophobic Silicalite-1/PDMS Membrane for Simultaneously Achieving Superior Bioethanol Pervaporation and Fouling/Biofouling Resistance

Recently, the coupling of biofuel fermentation broths and pervaporation has been receiving increasing attention. Some challenges, such as the destructive effects of constituents of the real fermentation broth on the membrane performances, the lethal effects of the membrane surface chemical modifiers on the microorganisms, and being expensive, are against this concept. For the first time, a continuous study on the one-step and low-cost preparation of superhydrophobic membranes for bioethanol separation is made to address these challenges. In our previous work, spraying as a fast, scalable, and low-cost procedure was applied to fabricate the one-layered active-layer hydrophobic (OALH) silicalite-1/polydimethylsiloxane (PDMS) membrane on the low-cost mullite support. In this work, the spraying method was adopted to fabricate a two-layered active-layer superhydrophobic (TALS) silicalite-1/PDMS membrane, where the novel active layer consisted of two layers with different hydrophobicities and densities. Contact-angle measurements, surface charge determination, scanning electron microscopy, atomic force microscopy, and pervaporation separation using a 5 wt % ethanol solution were used to statically evaluate the fouling/biofouling resistance and pervaporation performances of OALH and TALS membranes in this study. The TALS membrane presented a better resistance and performance. For dynamic experiments, the Box-Behnken design was used to identify the effects of substrates, microorganisms, and nutrient contents as the leading indicators of fermentation broth on the TALS membrane performances for the long-term utilization. The maximum performances of 1.88 kg/m²·h, 32.34, and 59.04 kg/m²·h concerning the permeation flux, separation factor, and pervaporation separation index were obtained, respectively. The dynamic fouling/biofouling resistance of the TALS membrane was also characterized using energy-dispersive X-ray spectroscopy of all the tested membranes. The TALS membrane demonstrated the synergistic resistance of membrane fouling and biofouling. Eventually, the novel TALS membrane was found to have potential for biofuel recovery, especially bioethanol.

Biomimetic Asymmetric Polymer Brush Coatings Bearing Fencelike Conformation Exhibit Superior Protection and Antifouling Performance

Antifouling surfaces with optimized conformation and compositional heterogeneities are presented with the goal of improving the efficacy of surface protection. The approach exploits the adhesive group (thiol or catechol chain end) to anchor asymmetric polymer brushes (APBs) bearing amphiphilic side chains with synergistic nonfouling and fouling-release abilities onto the surface. The conformation of the APB surface is close to the fencelike structure, which mimics lubricating protein lubricin, endowing the surface with capacity of enhanced protection and antiadhesivity, even facing the high compression of fouling. By utilizing a poly(Br-acrylate-alkyne) macroagent comprising alkynyl and 2-bromopropionate groups, we prepared a series of APB surfaces based on polyacrylate-g-poly(ethylene oxide)/poly(pentafluorophenyl methacrylate) (PA-g-PEO/PPFMA) APBs to explore the influence of the content of the fluorinated segment and bioinspired topological polymer chemistry on their antifouling performance. The APB surfaces can not only provide compositional heterogeneities of PEO and fluorinated segments in each side chain but also give a high surface coverage because of the characteristic of high grafting density of macromolecular brushes. It was found for the first time, as far as we are aware, the fencelike APB surface shows excellent antifouling performance with less protein adsorption (up to 91% off) and cell adhesion (up to 84% off) in comparison with the controlled substrate under relatively long incubation time.

Biomimetic Self-Renewal Polymer Brushes with Protein Resistance Inspired by Fish Skin

Inspired by fish skin, biomimetic self-renewal poly[(ethylene oxide)-co-(ethylene carbonate)] (PEOC) brushes with protein resistance had been prepared via surface-initiated ring-opening polymerization (ROP). The results of hydrolytic degradation indicated that the PEOC brushes could degrade in artificial seawater. Ellipsometry, X-ray photoelectron spectrometry, and contact angle results demonstrated that the PEOC brushes degrade uniformly. By using a quartz crystal microbalance with dissipation, we studied the protein adsorption on the surfaces in artificial seawater at different degradation times. After 24, 48, 96, and 168 h of degradation, the PEOC surfaces showed nearly zero Δf and ΔD for bovine serum albumin, lysozyme, and fibrinogen. More importantly, there was a notably lower density of microorganisms adhered to the surface modified with PEOC compared with that of the surface without PEOC in natural seawater. The current study showed that the PEOC brushes exhibit a self-renewal property with persistent protein resistance and prevent the adhesion of microorganisms. Such a biomimetic polymer had a great potential in marine antibiofouling.

Oxidation-Mediated, Zwitterionic Polydopamine Coatings for Marine Antifouling Applications

We synthesized a zwitterionic dopamine derivative ( ZW-DOPA) containing both catechol and amine groups, and we demonstrated an excellent marine antifouling surface by controlling the oxidation of ZW-DOPA. The oxidation was mediated by the deprotonation of catechol or the addition of an oxidant (ammonium persulfate (AP) or sodium periodate (NaIO₄)). The oxidation and subsequent molecular transformation of ZW-DOPA was investigated over time by UV-vis spectroscopy. Among the different oxidation conditions tested, NaIO₄-induced ZW-DOPA coating was the most efficient and successfully formed on various substrates, such as titanium dioxide, stainless steel, and nylon. Compared with uncoated substrates, ZW-DOPA-coated substrates showed high resistance to marine diatom adhesion. Considering the ease of use and substrate independence of the ZW-DOPA coating, this method shows promise as a basis for inhibiting marine fouling on a variety of substrates used in the marine industry and aquatic environments.

Diblock Polymer Brush (PHEAA- b-PFMA): Microphase Separation Behavior and Anti-Protein Adsorption Performance

In this paper, a series of amphiphilic diblock polymers of poly(hydroxyethylacrylamide)- b-poly(1H,1H-pentafluoropropyl methacrylate) (PHEAA- b-PFMA) were grafted from silicon wafer via surface-initiated atom transfer radical polymerization (SI-ATRP). Surface wettability and chemical compositions of the modified surfaces were characterized by contact angle goniometer and X-ray photoelectron spectroscopy (XPS) respectively. Molecular weight and polydispersity of each block were measured using gel permeation chromatography (GPC). The topography and the microphase separation behavior of PHEAA- b-PFMA surfaces were investigated by atomic force microscope (AFM). The results show that only when the grafting density (σ) and thickness of PHEAA brush were in the range of 0.9-1.3 (chain/nm²) and 6.6-15.1 nm, respectively, and the ratio of PFMA/PHEAA varied from 89/42 to 89/94, could the diblock copolymer phase separate into nanostructures. Further, the antiprotein adsorption performance of the modified surfaces against BSA, fibrinogen, and lysozyme was studied. The results indicated the modified surfaces could reduce the protein adsorption compared to the pristine silicon wafer. For Fibrinogen, the antiadsorption effect of PHEAA- b-PFMA-modified surfaces with microphase segregation was better than that of corresponding PHEAA modified surfaces. The results provide further evidence that surface composition and microphase segregation of fluorinated moieties of block copolymer brushes significantly impact protein adsorption behaviors.

Facile Construction of Robust Multilayered PEG Films on Polydopamine-Coated Solid Substrates for Marine Antifouling Applications

We report an effective and versatile approach to control marine fouling on artificial surfaces based on specific chemical interactions found in marine mussels. The approach consists of mussel-inspired polydopamine coating, spin-coating-assisted deposition of poly(ethylene glycol) (PEG) catechols, and their cross-linking via catechol-Fe³⁺-catechol interactions. Using this approach, multilayered PEG films that were highly resistant to marine diatom adhesion were successfully constructed on various substrates, such as stainless steel, nylon, titanium oxide, and silicon oxide. We believe that our results will provide a basis for the construction of a marine antifouling agent that can be applied by a large variety of industries owing to its applicability to different types of substrates and stability under marine environments.

A multi-step approach for testing non-toxic amphiphilic antifouling coatings against marine microfouling at different levels of biological complexity

Marine biofouling on artificial surfaces such as ship hulls or fish farming nets causes enormous economic damage. The time for the developmental process of antifouling coatings can be shortened by reliable laboratory assays. For designing such test systems, it is important that toxic effects can be excluded, that multiple parameters can be addressed simultaneously and that mechanistic aspects can be included. In this study, a multi-step approach for testing antifouling coatings was established employing photoautotrophic biofilm formation of marine microorganisms in micro- and mesoscoms. Degree and pattern of biofilm formation was determined by quantification of chlorophyll fluorescence. For the microcosms, co-cultures of diatoms and a heterotrophic bacterium were exposed to fouling-release coatings. For the mesocosms, a novel device was developed that permits parallel quantification of a multitude of coatings under defined conditions with varying degrees of shear stress. Additionally, the antifouling coatings were tested for leaching of potential compounds and finally tested in sea trials. This multistep-approach revealed that the individual steps led to consistent results regarding antifouling activity of the coatings. Furthermore, the novel mesocosm system can be employed for advanced antifouling analysis including metagenomic approaches for determination of microbial diversity attaching to different coatings under changing shear forces.

Antifouling membranes for sustainable water purification: strategies and mechanisms

One of the greatest challenges to the sustainability of modern society is an inadequate supply of clean water. Due to its energy-saving and cost-effective features, membrane technology has become an indispensable platform technology for water purification, including seawater and brackish water desalination as well as municipal or industrial wastewater treatment. However, membrane fouling, which arises from the nonspecific interaction between membrane surface and foulants, significantly impedes the efficient application of membrane technology. Preparing antifouling membranes is a fundamental strategy to deal with pervasive fouling problems from a variety of foulants. In recent years, major advancements have been made in membrane preparation techniques and in elucidating the antifouling mechanisms of membrane processes, including ultrafiltration, nanofiltration, reverse osmosis and forward osmosis. This review will first introduce the major foulants and the principal mechanisms of membrane fouling, and then highlight the development, current status and future prospects of antifouling membranes, including antifouling strategies, preparation techniques and practical applications. In particular, the strategies and mechanisms for antifouling membranes, including passive fouling resistance and fouling release, active off-surface and on-surface strategies, will be proposed and discussed extensively.

Antifouling behavior of self-renewal acrylate boron polymers with pyridine-diphenylborane side chains

The environmentally friendly polymers showed excellent antifouling performances in raft tests by the hydrolysis of diphenyl borane pyridine side groups.

(PtBA-co-PPEGMEMA-co-PDOMA)-g-PPFA polymer brushes synthesized by sequential RAFT polymerization and ATRP

This article reports the synthesis of semi-fluorinated (PtBA-co-PPEGMEMA-co-PDOMA)-g-PPFA polymer brushes for self-cleaning anti-fouling surfaces.

Capsaicin-Inspired Thiol-Ene Terpolymer Networks Designed for Antibiofouling Coatings

Novel photocurable ternary polymer networks were prepared by incorporating N-(4-hydroxy-3-methoxybenzyl)-acrylamide (HMBA) into a cross-linked thiol-ene network based on poly(ethylene glycol)diacrylate (PEGDA) and (mercaptopropyl)methylsiloxane homopolymers (MSHP). The ternary network materials displayed bactericidal activity against Escherichia coli and Staphylococcus aureus and reduced the attachment of marine organism Phaeodactylum tricornutum. Extensive soaking of the polymer networks in aqueous solution indicated that no active antibacterial component leached out of the materials, and thus the ternary thiol-ene coating killed the bacteria by surface contact. The surface structures of the polymer networks with varied content ratios were studied by sum frequency generation (SFG) vibrational spectroscopy. The results demonstrated that the PDMS Si-CH₃ groups and mimic-capsaicine groups are predominantly present at the polymer-air interface of the coatings. Surface reorganization was apparent after polymers were placed in contact with D₂O: the hydrophobic PDMS Si-CH₃ groups left the surface and returned to the bulk of the polymer networks, and the hydrophilic PEG chains cover the polymer surfaces in D₂O. The capasaicine methoxy groups are able to segregate to the surface in an aqueous environment, depending upon the ratio of HMBA/PEGDA. SFG measurements in situ showed that the antibacterial HMBA chains, rather than the nonfouling PEG, played a dominant role in mediating the antibiofouling performance in this particular polymer system.

Model Amphiphilic Block Copolymers with Tailored Molecular Weight and Composition in PDMS-Based Films to Limit Soft Biofouling

A set of controlled surface composition films was produced utilizing amphiphilic block copolymers dispersed in a cross-linked poly(dimethylsiloxane) network. These block copolymers contained oligo(ethylene glycol) (PEGMA) and fluoroalkyl (AF6) side chains in selected ratios and molecular weights to control surface chemistry including antifouling and fouling-release performance. Such properties were assessed by carrying out assays using two algae, the green macroalga Ulva linza (favors attachment to polar surfaces) and the unicellular diatom Navicula incerta (favors attachment to nonpolar surfaces). All films performed well against U. linza and exhibited high removal of attached sporelings (young plants) under an applied shear stress, with the lower molecular weight block copolymers being the best performing in the set. The composition ratios from 50:50 to 60:40 of the AF6/PEGMA side groups were shown to be more effective, with several films exhibiting spontaneous removal of the sporelings. The cells of N. incerta were also removed from several coating compositions. All films were characterized by surface techniques including captive bubble contact angle, atomic force microscopy, and near edge X-ray absorption fine structure spectroscopy to correlate surface chemistry and morphology with biological performance.

Semifluorinated Synergistic Nonfouling/Fouling-Release Surface

The preparation of a fluorine-containing synergistic nonfouling/fouling-release surface, using a b-PFMA-PEO asymmetric molecular brush possessing both poly(ethylene glycol) (PEO) and poly(2,2,2-trifluoroethyl methacrylate) (PFMA) side chains densely distributed on the same repeat unit along the polymeric backbone, is reported. On the basis of the poly(Br-acrylate-alkyne) macroagent comprising two functionalities (alkynyl and 2-bromopropionate), which is prepared by reversible addition-fragmentation chain transfer homopolymerization of a new trifunctional acrylate monomer of Br-acrylate-alkyne, b-PFMA-PEO asymmetric molecular brushes are obtained by concurrent atom transfer radical polymerization and Cu-catalyzed azide/alkyne cycloaddition "click" reaction in a one-shot system. A spin-cast thin film of the b-PFMA-PEO asymmetric molecular brush exhibits a synergistic antifouling property, in which PEO side chains endow the surface with a nonfouling characteristic, whereas PFMA side chains display the fouling-release functionality because of their low surface energy. Both protein adsorption and cell adhesion tests provided estimates of the antifouling activity of the asymmetric molecular brush surfaces, which was demonstrated to be influenced by the degree of polymerization of the backbone and the length of the PEO and PFMA side chains. With compositional heterogeneities, all asymmetric molecular brush surfaces show considerable antifouling performance with much less protein adsorption (at least 45% off, up to 75% off) and cell adhesion (at least 70% off, up to 90% off) in comparison with a bare surface.

Marine anti-biofouling efficacy of amphiphilic poly(coacrylate) grafted PDMSe: effect of graft molecular weight

There is currently strong motivation due to ecological concerns to develop effective anti-biofouling coatings that are environmentally benign, durable, and stable for use by the maritime industry. The antifouling (AF) and fouling-release (FR) efficacy of amphiphilic, charged copolymers composed of ~52% acrylamide, ~34% acrylic acid, and ~14% methyl acrylate grafted to poly(dimethyl siloxane) (PDMSe) surfaces were tested against zoospores of the green alga Ulva linza and the diatom Navicula incerta. The biofouling response to molecular weight variation was analyzed for grafts ranging from ~100 to 1,400 kg mol^-1, The amphiphilic coatings showed a marked improvement in the FR response, with a 55% increase in the percentage removal of diatoms and increased AF efficacy, with 92% reduction in initial attachment density of zoospores, compared to PDMSe controls. However, graft molecular weight, in the range tested, was statistically insignificant. Grafting copolymers to PDMSe embossed with the Sharklet™ microtopography did not produce enhanced AF efficacy.

Construction of catechol-containing semi-fluorinated asymmetric polymer brush via successive RAFT polymerization and ATRP

This article reports the synthesis of a semi-fluorinated compositional heterogeneous polymer brush for anti-fouling surface.

Hybrid Hairy Janus Particles as Building Blocks for Antibiofouling Surfaces

Herein, we report a new strategy for the design of antifouling surfaces by using hybrid hairy Janus particles. The amphiphilic Janus particles possess either a spherical or a plateletlike shape and have core-shell structures with an inorganic core and hydrophilic/hydrophobic polymeric shells. Subsequently, these bifunctional Janus particles enable the fabrication of surfaces with modularity in chemical composition and final surface topography, which possess antifouling properties. The antifouling and fouling-release capability of the composite Janus particle-based surfaces is investigated using the marine biofilm-forming bacteria Cobetia marina. The Janus particle-based coatings are robust and significantly reduce bacterial retention under both static and dynamic conditions independent of the particle geometry. The plateletlike (kaolinite-based) Janus particles represent a scalable system for the rational design of antifouling coatings as well as their large-scale production and application in the future.

Improved Antifouling Properties of Polydimethylsiloxane Films via Formation of Polysiloxane/Polyzwitterion Interpenetrating Networks

Nonspecific adsorption of proteins is a challenging problem for the development of biocompatible materials, as well as for antifouling and fouling-release coatings, for instance for the marine industry. The concept of preparing amphiphilic systems based on low surface energy hydrophobic materials via their hydrophilic modification is being widely pursued. This work describes a novel two-step route for the preparation of interpenetrating polymer networks of otherwise incompatible poly(dimethylsiloxane) and zwitterionic polymers. Changes in surface hydrophilicity as well as surface charge at different pH values are investigated. Characterization using atomic force microscopy provides thorough insight into surface changes upon hydrophilic modification. Protein fouling of the materials is assessed using fibrinogen as a model protein.

Synthesis of hybrid zinc/silyl acrylate copolymers and their surface properties in the microfouling stage

Development of an environmentally friendly and efficient marine antifouling coating is a central goal in marine antifouling.

Effects of surface-active block copolymers with oxyethylene and fluoroalkyl side chains on the antifouling performance of silicone-based films

Block copolymers made from a poly(dimethyl siloxane) (Si) and a poly(meth)acrylate carrying oxyethylene (EG) or fluoroalkyl (AF) side chains were synthesized and incorporated as surface-active components into a silicone matrix to produce cross-linked films with different surface hydrophilicity/phobicity. Near-edge X-ray absorption fine structure (NEXAFS) studies showed that film surfaces containing Si-EG were largely populated by the siloxane, with the oxyethylene chains present only to a minor extent. In contrast, the fluorinated block was selectively segregated to the polymer-air interface in films containing Si-AF as probed by NEXAFS and X-ray photoelectron spectroscopy (XPS) analyses. Such differences in surface composition were reflected in the biological performance of the coatings. While the films with Si-EG showed a higher removal of both Ulva linza sporelings and Balanus amphitrite juveniles than the silicone control, those with Si-AF exhibited excellent antifouling properties, preventing the settlement of cyprids of B. amphitrite.

Polyacrylamide strengthened mixed-charge hydrogels and their applications in resistance to protein adsorption and algae attachment

Mixed-charge polymer hydrogels were successfully prepared by copolymerization of different ratios of [2-(meth-acryloyloxy)ethyl]trimethylammonium (TMA) and 3-sulfopropyl methacrylate (SA).

Irreversible fouling control of PVDF ultrafiltration membrane with “fouled surface” for mimetic sewage treatment

Polyvinylidene fluoride (PVDF) ultrafiltration membranes with sodium alginate (SA) as the “fouled surface” were prepared, in an effort to control irreversible membrane fouling in mimetic sewage treatment processes.

Efficient Preparation of Super Antifouling PVDF Ultrafiltration Membrane with One Step Fabricated Zwitterionic Surface

On the basis of the excellent fouling resistance of zwitterionic materials, the super antifouling polyvinylidene fluoride (PVDF) membrane was efficiently prepared though one-step sulfonation of PVDF and polyaniline blend membrane in situ. The self-doped sulfonated polyaniline (SPANI) was generated as a novel zwitterionic polymer to improve the antifouling property of PVDF ultrafiltration membrane used in sewage treatment. Surface attenuated total reflection Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, surface zeta potential, and water contact angle demonstrated the successful fabrication of zwitterionic interface by convenient sulfonation modification. The static adsorption fouling test showed the quantified adsorption mass of bovine serum albumin (BSA) pollutant on the PVDF/SPANI membrane surface decreases to 3(±2) μg/cm(2), and the water flux recovery ratio (FRR) values were no less than 95% for the three model pollutants of BSA, sodium alginate (SA), and humic acid (HA), which were corresponding hydrophobic, hydrophilic, and natural pollutants in sewage, respectively. This Research Article demonstrated the antifouling advantages of zwitterionic SPANI and aimed to provide a simple method for the large scale preparation of zwitterionic antifouling ultrafiltration membranes.

Versatile, tannic acid-mediated surface PEGylation for marine antifouling applications

In this study, we report a facile and versatile approach to the formation of marine antifouling surface coatings. The approach consists of a combined coating of polydopamine (pDA) and tannic acid (TA) and subsequent immobilization of polyethylene glycol (PEG) on solid substrates. TA coating of a pDA-coated surface was carried out using iron(III) coordination chemistry, and PEG was immobilized on the TA-coated surface via hydrogen bond formation. Stainless steel and nylon were successfully modified by this approach, and the resulting substrates were used for marine antifouling applications, in which diatom adhesion was significantly inhibited. Advantageously, this approach allowed marine antifouling coatings to be prepared by a simple immersion process under environmentally friendly conditions.

Dual-mode antifouling ability of PVDF membrane with a surface-anchored amphiphilic polymer

Surface-anchored PDMS-g-PEG effectively improved the dual-mode antifouling properties of PVDF membrane.

Protein-resistance performance of amphiphilic copolymer brushes consisting of fluorinated polymers and polyacrylamide grafted from silicon surfaces

A series of random copolymer brushes of acrylamide (AM) and 2-(perfluorinated hexyl)ethyl methacrylate (FMA) were grafted from initiator-functionalized silicon wafers by surface-initiated atom transfer radical polymerization.

Antifouling, high-flux nanofiltration membranes enabled by dual functional polydopamine

A facile method for fabricating antifouling and high-flux nanofiltration (NF) membranes was developed based on bioinspired polydopamine (PDA). Polyethersulfone (PES) ultrafiltration membrane as the support was first deposited a thin PDA layer and then chemically modified by a new kind of fluorinated polyamine via Michael addition reaction between fluorinated polyamine and quinone groups of PDA. PDA coating significantly reduced the pore sizes of the PES support membrane and endowed the NF membrane with high separation performance (flux about 46.1 L/(m(2) h) under 0.1 MPa, molecular weight cutoff of about 780 Da). The grafted fluorinated polyamine on the PDA layer could form low free energy microdomains to impede the accumulation/coalescence of foulants and lower the adhesion force between foulants and the membrane, rendering the membrane surface with prominent fouling-release property. When foulant solutions (including bovine serum albumin, oil and humic acid) were filtered, the resultant NF membrane exhibited excellent antifouling properties (the minimal value of total flux decline ratio was ∼8.9%, and the flux recovery ratio reached 98.6%). It is also found that the structural stability of the NF membrane could be significantly enhanced due to the covalent bond and other intermolecular interactions between the PDA layer and the PES support.

Sequence of Hydrophobic and Hydrophilic Residues in Amphiphilic Polymer Coatings Affects Surface Structure and Marine Antifouling/Fouling Release Properties

Amphiphilic polymers, specifically combinations of hydrophilic and hydrophobic residues, have been shown to be effective as antifouling materials against the algae Ulva linza and Navicula diatoms. Here we use the inherent sequence specificity of polypeptoids made by solid-phase synthesis to show that the sequence of hydrophilic (methoxy) and hydrophobic (fluorinated) moieties affects both antifouling and fouling release of U. linza. The platform used to test these sequences was a polystyrene-b-poly(ethylene oxide-co-allyl glycidyl ether) (PS-b-P(EO-co-AGE)) scaffold, where the polypeptoids are attached to the scaffold using thiol-ene click chemistry. The fluorinated moiety is very surface active and directs the surface composition of the polymer thin film. The position and number of fluorinated groups in the polypeptoid are shown to affect both the surface composition and antifouling properties of the film. Specifically, the position of the fluorinated units in the peptoid chain changes the surface chemistry and the antifouling behavior, while the number of fluorinated residues affects the fouling-release properties.

Amphiphilic triblock copolymers with PEGylated hydrocarbon structures as environmentally friendly marine antifouling and fouling-release coatings

The ideal marine antifouling (AF)/fouling-release (FR) coating should be non-toxic, while effectively either resisting the attachment of marine organisms (AF) or significantly reducing their strength of attachment (FR). Many recent studies have shown that amphiphilic polymeric materials provide a promising solution to producing such coatings due to their surface dual functionality. In this work, poly(ethylene glycol) (PEG) of different molecular weights (Mw = 350, 550) was coupled to a saturated difunctional alkyl alcohol to generate amphiphilic surfactants (PEG-hydrocarbon-OH). The resulting macromolecules were then used as side chains to covalently modify a pre-synthesized PS8 K-b-P(E/B)25 K-b-PI10 K (SEBI or K3) triblock copolymer, and the final polymers were applied to glass substrata through an established multilayer surface coating technique to prepare fouling resistant coatings. The coated surfaces were characterized with AFM, XPS and NEXAFS, and evaluated in laboratory assays with two important fouling algae, Ulva linza (a green macroalga) and Navicula incerta, a biofilm-forming diatom. The results suggest that these polymer-coated surfaces undergo surface reconstruction upon changing the contact medium (polymer/air vs polymer/water), due to the preferential interfacial aggregation of the PEG segment on the surface in water. The amphiphilic polymer-coated surfaces showed promising results as both AF and FR coatings. The sample with longer PEG chain lengths (Mw = 550 g mol(-1)) exhibited excellent properties against both algae, highlighting the importance of the chemical structures on ultimate biological performance. Besides reporting synthesis and characterization of this new type of amphiphilic surface material, this work also provides insight into the nature of PEG/hydrocarbon amphiphilic coatings, and this understanding may help in the design of future generations of fluorine-free, environmentally friendly AF/FR polymeric coatings.