Controlled Depolymerization: Stimuli-Responsive Self-Immolative Polymers

Multifunctional scaffolds for bone repair following age-related biological decline: Promising prospects for smart biomaterial-driven technologies

The repair of large bone defects due to trauma, disease, and infection can be exceptionally challenging in the elderly. Despite best clinical practice, bone regeneration within contemporary, surgically implanted synthetic scaffolds is often problematic, inconsistent, and insufficient where additional osteobiological support is required to restore bone. Emergent smart multifunctional biomaterials may drive important and dynamic cellular crosstalk that directly targets, signals, stimulates, and promotes an innate bone repair response following age-related biological decline and when in the presence of disease or infection. However, their role remains largely undetermined. By highlighting their mechanism/s and mode/s of action, this review spotlights smart technologies that favorably align in their conceivable ability to directly target and enhance bone repair and thus are highly promising for future discovery for use in the elderly. The four degrees of interactive scaffold smartness are presented, with a focus on bioactive, bioresponsive, and the yet-to-be-developed autonomous scaffold activity. Further, cell- and biomolecular-assisted approaches were excluded, allowing for contemporary examination of the capabilities, demands, vision, and future requisites of next-generation biomaterial-induced technologies only. Data strongly supports that smart scaffolds hold significant promise in the promotion of bone repair in patients with a reduced osteobiological response. Importantly, many techniques have yet to be tested in preclinical models of aging. Thus, greater clarity on their proficiency to counteract the many unresolved challenges within the scope of aging bone is highly warranted and is arguably the next frontier in the field. This review demonstrates that the use of multifunctional smart synthetic scaffolds with an engineered strategy to circumvent the biological insufficiencies associated with aging bone is a viable route for achieving next-generation therapeutic success in the elderly population.

Deconstruction of Polymers through Olefin Metathesis

The consumption of synthetic polymers has ballooned; so has the amount of post-consumer waste generated. The current polymer economy, however, is largely linear with most of the post-consumer waste being either landfilled or incinerated. The lack of recycling, together with the sizable carbon footprint of the polymer industry, has led to major negative environmental impacts. Over the past few years, chemical recycling technologies have gained significant traction as a possible technological route to tackle these challenges. In this regard, olefin metathesis, with its versatility and ease of operation, has emerged as an attractive tool. Here, we discuss the developments in olefin-metathesis-based chemical recycling technologies, including the development of new materials and the application of olefin metathesis to the recycling of commercial materials. We delve into structure-reactivity relationships in the context of polymerization-depolymerization behavior, how experimental conditions influence deconstruction outcomes, and the reaction pathways underlying these approaches. We also look at the current hurdles in adopting these technologies and relevant future directions for the field.

Chemical Reactions in Living Systems

The term "in vivo ("in the living") chemistry" refers to chemical reactions that take place in a complex living system such as cells, tissue, body liquids, or even in an entire organism. In contrast, reactions that occur generally outside living organisms in an artificial environment (e.g., in a test tube) are referred to as in vitro. Over the past decades, significant contributions have been made in this rapidly growing field of in vivo chemistry, but it is still not fully understood, which transformations proceed efficiently without the formation of by-products or how product formation in such complex environments can be characterized. Potential applications can be imagined that synthesize drug molecules directly within the cell or confer new cellular functions through controlled chemical transformations that will improve the understanding of living systems and develop new therapeutic strategies. The guiding principles of this contribution are twofold: 1) Which chemical reactions can be translated from the laboratory to the living system? 2) Which characterization methods are suitable for studying reactions and structure formation in complex living environments?

Click to Self-immolation: A "Click" Functionalization Strategy towards Triggerable Self-Immolative Homopolymers and Block Copolymers

Self-immolative polymers (SIPs) are a class of degradable macromolecules that undergo stimuli-triggered head-to-tail depolymerization. However, a general approach to readily end-functionalize SIP precursors for programmed degradation remains elusive, restricting access to complex, functional SIP-based materials. Here we present a "click to self-immolation" strategy based on aroyl azide-capped SIP precursors, enabling the facile construction of diverse SIPs with different trigger units through a Curtius rearrangement and alcohol/thiol-isocyanate "click" reaction. This strategy is also applied to polymer-polymer coupling to access fully depolymerizable block copolymer amphiphiles, even combining different SIP backbones. Our results demonstrate that the depolymerization can be actuated efficiently under physiologically-relevant conditions by the removal of the trigger units and ensuing self-immolation of the p-aminobenzyl carbonate linkage, indicating promise for controlled release applications involving nanoparticles and hydrogels.

Reversible Polymer-Protein Functionalization by Stepwise Introduction of Amine-Reactive, Reductive-Responsive Self-Immolative End Groups onto RAFT-Derived Polymers

Many promising therapeutic protein or peptide drug candidates are rapidly excreted from an organism due to their small size or their inherent immunogenicity. One way to counteract these effects is PEGylation, in which the biopolymer is shielded by synthetic polymers exploiting their stealth properties. However, these modifications are often accompanied by a reduction in the biological function of the protein. By using responsive moieties that bridge the polymer to the protein, a reversible character is provided to this type of conjugation. In this regard, the reductive-responsive nature of disulfides can be exploited via self-immolative structures for reversible linkage to aminic lysine residues and the N-terminus on the protein surface. They enable a traceless release of the intact protein without any further modification and thus preserve the protein's bioactivity. In this study, we demonstrate how this chemistry can be made broadly accessible to RAFT-derived water-soluble polymers like poly(N,N-dimethylacrylamide) (pDMA) as a relevant PEG alternative. A terminal reactive imidazole carbamate with an adjacent self-immolative motif was generated in a gradual manner onto the trithiocarbonate chain transfer moiety of the polymer by first substituting it with a disulfide-bridged alcohol and subsequently converting it into an amine reactive imidazole carbamate. Successful synthesis and complete characterization were demonstrated by NMR, size exclusion chromatography, and mass spectrometry. Finally, two model proteins, lysozyme and a therapeutically relevant nanobody, were functionalized with the generated polymer, which was found to be fully reversible under reductive conditions in the presence of free thiols. This strategy has the potential to extend the generation of reversible reductive-responsive polymer-protein hybrids to the broad field of available functional RAFT-derived polymers.

Cell-Membrane Coated Self-Immolative Poly(thiourethane) for Cysteine/Homocysteine-Triggered Intracellular H2S Delivery

Hydrogen sulfide (H2S) is an important gaseous signaling molecule with unique pleiotropic pharmacological effects, but may be limited for clinical translation due to the lack of a reliable delivery form that delivers exogenous H2S to cells at action site with precisely controlled dosage. Herein, we report the design of a poly(thiourethane) (PTU) self-immolative polymer terminally caged with an acrylate moiety to trigger release of H2S in response to cysteine (Cys) and homocysteine (Hcy), the most used and independent indicators of neurodegenerative diseases. The synthesized PTU polymer was then coated with the red-blood-cell (RBC) membrane in the presence of solubilizing agent to self-assemble into nanoparticles with enhanced stability and cytocompatibility. The Hcy/Cys mediated addition/cyclization chemistry actuated the biomimetic polymeric nanoparticles to disintegrate into carbonyl sulfide (COS), and finally convert into H2S via the ubiquitous carbonic anhydrase (CA). H2S released in a controlled manner exhibited a strong antioxidant ability to resist Alzheimer's disease (AD)-related oxidative stress factors in BV-2 cells, a neurodegenerative disease model in vitro. Thus, this work may provide an effective strategy to construct H2S donors that can degrade in response to a specific pathological microenvironment for the treatment of neurodegenerative diseases.

Controlled Ring-Opening Polymerization of Macrocyclic Monomers Based on Ring-Opening/Ring-Closing Cascade Reaction

The development of a controlled ring-opening polymerization (ROP) method for synthesizing backbone-functionalized and sequence-controlled polymers with well-defined architectures from macrocyclic monomers is highly desirable in polymer chemistry. Herein, we developed a novel general controlled ROP of macrocycles for producing backbone functional and sequence-controlled polyurethanes and polyamides with controlled molecular weights and narrow dispersities (Đ < 1.1). The key to this method is the introduction of a trimethyl lock unit, an efficient cyclization-based self-immolative spacer, into the macrocyclic monomer ring as a "ring-opening trigger." ROP is initiated by the attack of a primary amine nucleophile on the ring-activated carbonate/ester group, leading to the ring opening of the macrocyclic monomer. Subsequently, spontaneous 6-exo-trig cyclization of the trimethyl lock unit occurs, detaching this ring-opening trigger and regenerating the primary amine end group. The regenerated primary amine group can then be used to propagate the polymer chain by iterating the ring-opening-ring-closing cascade reaction. The versatile ROP method can be applied in the synthesis of water-soluble polyurethanes, backbone-degradable polyurethanes and poly(ester amide)s, and sequence-controlled poly(amino acid)s with well-defined macromolecular architectures.

Naked-Eye Thiol Analyte Detection via Self-Propagating, Amplified Reaction Cycle

We present an approach for detecting thiol analytes through a self-propagating amplification cycle that triggers the macroscopic degradation of a hydrogel scaffold. The amplification system consists of an allylic phosphonium salt that upon reaction with the thiol analyte releases a phosphine, which reduces a disulfide to form two thiols, closing the cycle and ultimately resulting in exponential amplification of the thiol input. When integrated in a disulfide cross-linked hydrogel, the amplification process leads to physical degradation of the hydrogel in response to thiol analytes. We developed a numerical model to predict the behavior of the amplification cycle in response to varying concentrations of thiol triggers and validated it with experimental data. Using this system, we were able to detect multiple thiol analytes, including a small molecule probe, glutathione, DNA, and a protein, at concentrations ranging from 132 to 0.132 μM. In addition, we discovered that the self-propagating amplification cycle could be initiated by force-generated molecular scission, enabling damage-triggered hydrogel destruction.

Mechanisms of Degradation for Polydisulfides: Main Chain Scission, Self-Immolation, Or Chain Transfer Depolymerization

Organic polydisulfides hold immense potential for the design of recyclable materials. Of these, polymers based on lipoic acid are attractive, as they are based on a natural, renewable resource. Herein, we demonstrate that reductive degradation of lipoic acid polydisulfides is a rapid process whereby the quantity of added initiator relative to the polymer content defines the mechanism of polymer degradation, through the main chain scission, self-immolation, or "chain transfer" depolymerization. The latter mechanism is defined as the one during which a thiol group released through the decomposition of one polydisulfide chain initiates depolymerization of the neighbor macromolecule. The chain transfer mechanism afforded the highest yields of recovery of the monomer in its pristine form, and just one molecule of the reducing agent to initiate polymer degradation afforded recovery of over 50% of the monomer. These data are important to facilitate the development of polymer recycling and monomer reuse schemes.

Ring-Opening Polymerization for the Goal of Chemically Recyclable Polymers

A crucial modern dilemma relates to the ecological crisis created by excess plastic waste production. An emerging technology for reducing plastic waste is the production of "chemically recyclable" polymers. These polymers can be efficiently synthesized through ring-opening polymerization (ROP/ROMP) and later recycled to pristine monomer by ring-closing depolymerization, in an efficient circular-type system. This Perspective aims to explore the chemistry involved in the preparation of these monomer/polymer systems, while also providing an overview of the challenges involved, including future directions.

Chemical zymogens for the protein cysteinome

We present three classes of chemical zymogens established around the protein cysteinome. In each case, the cysteine thiol group was converted into a mixed disulfide: with a small molecule, a non-degradable polymer, or with a fast-depolymerizing fuse polymer (Z_LA). The latter was a polydisulfide based on naturally occurring molecule, lipoic acid. Zymogen designs were applied to cysteine proteases and a kinase. In each case, enzymatic activity was successfully masked in full and reactivated by small molecule reducing agents. However, only Z_LA could be reactivated by protein activators, demonstrating that the macromolecular fuse escapes the steric bulk created by the protein globule, collects activation signal in solution, and relays it to the active site of the enzyme. This afforded first-in-class chemical zymogens that are activated via protein-protein interactions. We also document zymogen exchange reactions whereby the polydisulfide is transferred between the interacting proteins via the "chain transfer" bioconjugation mechanism.

Degradable polyprodrugs: design and therapeutic efficiency

Prodrugs are developed to increase the therapeutic properties of drugs and reduce their side effects. Polyprodrugs emerged as highly efficient prodrugs produced by the polymerization of one or several drug monomers. Polyprodrugs can be gradually degraded to release therapeutic agents. The complete degradation of polyprodrugs is an important factor to guarantee the successful disposal of the drug delivery system from the body. The degradation of polyprodrugs and release rate of the drugs can be controlled by the type of covalent bonds linking the monomer drug units in the polymer structure. Therefore, various types of polyprodrugs have been developed based on polyesters, polyanhydrides, polycarbonates, polyurethanes, polyamides, polyketals, polymetallodrugs, polyphosphazenes, and polyimines. Furthermore, the presence of stimuli-responsive groups, such as redox-responsive linkages (disulfide, boronate ester, metal-complex, and oxalate), pH-responsive linkages (ester, imine, hydrazone, acetal, orthoester, P-O and P-N), light-responsive (metal-complex, o-nitrophenyl groups) and enzyme-responsive linkages (ester, peptides) allow for a selective degradation of the polymer backbone in targeted tumors. We envision that new strategies providing a more efficient synergistic therapy will be developed by combining polyprodrugs with gene delivery segments and targeting moieties.

Self-Immolative Hydroxybenzylamine Linkers for Traceless Protein Modification

Traceless self-immolative linkers are widely used for the reversible modification of proteins and peptides. This article describes a new class of traceless linkers based on ortho- or para-hydroxybenzylamines. The introduction of electron-donating substituents on the aromatic core stabilizes the quinone methide intermediate, thus providing a platform for payload release that can be modulated. To determine the extent to which the electronics affect the rate of release, we prepared a small library of hydroxybenzylamine linkers with varied electronics in the aromatic core, resulting in half-lives ranging from 20 to 144 h. Optimization of the linker design was carried out with mechanistic insights from density functional theory (DFT) and the in silico design of an intramolecular trapping agent through the use of DFT and intramolecular distortion energy calculations. This resulted in the development of a faster self-immolative linker with a half-life of 4.6 h. To demonstrate their effectiveness as traceless linkers for bioconjugation, reversible protein-polyethylene glycol conjugates with a model protein lysozyme were prepared, which had reduced protein activity but recovered ≥94% activity upon traceless release of the polymer. This new class of linkers with tunable release rates expands the traceless linkers toolbox for a variety of bioconjugation applications.

Recent advances in self-immolative linkers and their applications in polymeric reporting systems

Interest in self-immolative chemistry has grown over the past decade with more research groups harnessing the versatility to control the release of a compound from a larger chemical entity, given...

Self-Immolative Polymers: An Emerging Class of Degradable Materials with Distinct Disassembly Profiles

Self-immolative polymers are an emerging class of macromolecules with distinct disassembly profiles that set them apart from other general degradable materials. These polymers are programmed to disassemble spontaneously from head to tail, through a domino-like fragmentation, upon response to extremal stimuli. In the time since we first reported this unique type of molecule, several groups around the world have developed new, creative molecular structures that perform analogously to our pioneering polymers. Self-immolative polymers are now widely recognized as an important class of stimuli-responsive materials for a wide range of applications such as signal amplification, biosensing, drug delivery, and materials science. The quinone-methide elimination was shown to be an effective tool to achieve rapid domino-like fragmentation of polymeric molecules. Thus, numerous applications of self-immolative polymers are based on this disassembly chemistry. Although several other fragmentation reactions achieved the function requested for sequential disassembly, we predominantly focused in this Perspective on examples of self-immolative polymers that disassemble through the quinone-methide elimination. Selected examples of self-immolative polymers that disassembled through other chemistries are briefly described. The growing demand for stimuli-responsive degradable materials with novel molecular backbones and enhanced properties guarantees the future interest of the scientific community in this unique class of polymers.

Stimuli-responsive temporary adhesives: enabling debonding on demand through strategic molecular design

Stimuli-responsive temporary adhesives constitute a rapidly developing class of materials defined by the modulation of adhesion upon exposure to an external stimulus or stimuli. Engineering these materials to shift between two characteristic properties, strong adhesion and facile debonding, can be achieved through design strategies that target molecular functionalities. This perspective reviews the recent design and development of these materials, with a focus on the different stimuli that may initiate debonding. These stimuli include UV light, thermal energy, chemical triggers, and other potential triggers, such as mechanical force, sublimation, electromagnetism. The conclusion discusses the fundamental value of systematic investigations of the structure-property relationships within these materials and opportunities for unlocking novel functionalities in future versions of adhesives.

Metathesis Cascade-Triggered Depolymerization of Enyne Self-Immolative Polymers*

A novel class of enyne self-immolative polymers (SIPs) capable of metathesis cascade-triggered depolymerization is reported. Studies on model compounds established 1,6-enyne structures for efficient metathesis cascade reactions. SIPs incorporating the optimized 1,6-enyne motif were prepared via both polycondensation and iterative exponential growth approaches. These SIPs demonstrated excellent stability in strong acid, base, nucleophiles, or at elevated temperatures, and can undergo efficient and complete depolymerization once triggered by a metathesis catalyst. Further studies revealed that introducing a terminal alkene to the chain end of the enyne SIPs improved the depolymerization efficiency, and established their potential as stimuli-responsive materials.

Acid-Responsive Poly(glyoxylate) Self-Immolative Star Polymers

Self-immolative polymers have significant potential for applications such as drug or gene delivery. However, to realize this potential, such materials need to be customized to respond to specific variations in biological conditions. In this work, we investigated the design of new star-shaped self-immolative poly(ethyl glyoxylate)s (PEtGs) and their incorporation into responsive nanoparticles. PEtGs are a subclass of stimulus-responsive self-immolative polymers, which can be combined with different stimuli-responsive functionalities. Two different tetrathiol initiators were used for the polymerization in combination with a variety of potential pH-responsive end-caps, yielding a library of star PEtG polymers which were responsive to pH. Characterization of the depolymerization behavior of the polymers showed that the depolymerization rate was controlled by the end caps rather than the architecture of the polymer. A selection of the star polymers were modified with amines to allow introduction of charge-shifting properties. It was shown that pH-responsive nanoparticles could be prepared from these modified polymers and they demonstrated pH-dependent particle disruption. The pH responsiveness of these particles was studied by dynamic light scattering and ¹H nuclear magnetic resonance spectroscopy.

Self-Immolative System for Disclosure of Reactive Electrophilic Alkylating Agents: Understanding the Role of the Reporter Group

The development of stable, efficient chemoselective self-immolative systems, for use in applications such as sensors, requires the optimization of the reactivity and degradation characteristics of the self-immolative unit. In this paper, we describe the effect that the structure of the reporter group has upon the self-immolative efficacy of a prototype system designed for the disclosure of electrophilic alkylating agents. The amine of the reporter group (a nitroaniline unit) was a constituent part of a carbamate that functioned as the self-immolative unit. The number and position of substituents on the nitroaniline unit were found to play a key role in the rate of self-immolative degradation and release of the reporter group. The position of the nitro substituent (meta- vs para-) and the methyl groups in the ortho-position relative to the carbamate exhibited an influence on the rate of elimination and stability of the self-immolative system. The ortho-methyl substituents imparted a twist on the N–C (aromatic) bond leading to increased resonance of the amine nitrogen’s lone pair into the carbonyl moiety and a decrease of the leaving character of the carbamate group; concomitantly, this may also make it a less electron-withdrawing group and lead to less acidification of the eliminated β-hydrogen.

Preparation of Spherical Nucleic Acid Nanoparticles Containing a Self-immolative Poly(carbamate) Core

We prepared a novel spherical nucleic acid, containing a core structure of self-immolative poly(carbamate) (PC), with aminobenzyl alcohol as a repeating unit, by conjugating an end-activated PC derivative with an amine-terminated oligoDNA on a solid support for PC-oligoDNA. Dynamic light-scattering measurements revealed a hydrodynamic diameter of 107 nm with a narrow size distribution. A fluorescent monomer with aminobenzyl alcohol is available for PC-oligoDNA synthesis to enhance the fluorescence emission by a domino-like disassembly of PC in response to various external stimuli.

Amine-Catalyzed Chain Polymerization of Ethyl Glyoxylate from Alcohol and Thiol Initiators

Polyacetals have significant potential as degradable polymers, but aldehyde polymerizations are generally difficult to control. Here we show that polymerization of ethyl glyoxylate can be initiated from alcohols or thiols by activation with triethylamine to afford poly(ethyl glyoxylate) with controllable molecular weights and relatively low dispersities (Đ = 1.3-1.4), as evidenced by MALDI-TOF mass spectrometry. Stabilization against depolymerization by chain-capping with benzyl chloroformate was found to proceed without side reactions observed from chain-capping with tolyl isocyanate. The use of the stronger base DBU leads to competing side reactions that limit polymer molecular weight.

Enzyme-Triggered Disassembly of Polymeric Micelles by Controlled Depolymerization via Cascade Cyclization for Anticancer Drug Delivery

The high activity of specific enzymes in cancer has been utilized in cancer diagnosis, as well as tumor-targeted drug delivery. NAD(P)H:quinone oxidoreductase-1 (NQO1), an overexpressed enzyme in certain tumor types, maintains homeostasis and inhibits oxidative stress caused by elevated reactive oxygen species (ROS) in tumor cells. The activity of NQO1 in lung and liver cancer cells is increased compared to that in normal cells. Interestingly, NQO1 reacts with trimethyl-locked quinone propionic acid (QPA) and produces a lactone-based group via intramolecular cyclization. Toward this objective, we synthesized an amphiphilic block copolymer (QPA-P) composed of NQO1 enzyme-triggered depolymerizable QPA-locked polycaprolactone (PCL) and poly(ethylene glycol) (PEG) as hydrophobic and hydrophilic constituents, respectively. This QPA-P formed self-assembled micelles in aqueous conditions. It was observed that NQO1 catalyzed the depolymerization of QPA-locked PCL via a cascade two-step cyclization process, which eventually induced the dissociation of micellar structure and triggered the release of loaded drugs at the target cancer cells. Compared to the control group, the NQO1-responsive micelle showed NQO1-triggered intracellular drug release and enhanced anticancer effects. These results indicate that the NQO1-responsive polymeric micelles present a promising potential for improving therapeutic efficacy of an anticancer drug delivery system.

Noninvasive ratiometric fluorescence imaging of γ-glutamyltransferase activity using an activatable probe

γ-Glutamyltranspeptidase (GGT) is an important aminopeptidase overexpressed in many malignant tumors, and accurate detection of its activity is useful for the diagnosis and treatment of tumors. Herein, we report a GGT-activatable ratiometric fluorescent probe (1) constructed by covalently linking an 'always-on' BODIPY fluorophore with a GGT-activatable near-infrared (NIR) fluorescent substrate. Upon interaction with GGT, the NIR fluorescence at 735 nm in probe 1 is significantly enhanced, while the fluorescence of BODIPY at 517 nm remains unchanged. Using BODIPY fluorescence as an internal standard, significantly enhanced ratiometric fluorescence between 735 nm and 517 nm could be achieved, allowing accurate detection of the activity of GGT in living subjects independent of probe concentration. We demonstrate that probe 1 is feasible for the evaluation of GGT levels in different tumor cells and differentiation of GGT-positive tumor cells from GGT-negative normal tissue cells. Moreover, probe 1 is further applied for the visualization of tumor via noninvasive ratiometric fluorescence imaging of GGT activity, which could facilitate the detection of GGT-positive tumor tissues and study of GGT-related pathological processes.

Post-polymerization ‘click’ end-capping of polyglyoxylate self-immolative polymers

Post-polymerization CuAAC reactions are used to ‘click’ stimuli-cleavable triazole end-caps onto self-immolative poly(ethyl glyoxylate).

Sugar-Based Polymers from d-Xylose: Living Cascade Polymerization, Tunable Degradation, and Small Molecule Release

Enyne monomers derived from D-xylose underwent living cascade polymerizations to prepare new polymers with a ring-opened sugar and degradable linkage incorporated into every repeat unit of the backbone. Polymerizations were well-controlled and had living character, which enabled the preparation of high molecular weight polymers with narrow molecular weight dispersity values and a block copolymer. By tuning the type of acid-sensitive linkage (hemi-aminal ether, acetal, or ether functional groups), we could change the degradation profile of the polymer and the identity of the resulting degradation products. For instance, the large difference in degradation rates between hemi-aminal ether and ether-based polymers enabled the sequential degradation of a block copolymer. Furthermore, we exploited the generation of furan-based degradation products, from an acetal-based polymer, to achieve the release of covalently bound reporter molecules upon degradation.

Damage and Repair in Informational Poly(N-substituted urethane)s

The degradation and repair of uniform sequence-defined poly(N-substituted urethane)s was studied. Polymers containing an ω-OH end-group and only ethyl carbamate main-chain repeat units rapidly degrade in NaOH solution through an ω→α depolymerization mechanism with no apparent sign of random chain cleavage. The degradation mechanism is not notably affected by the nature of the side-chain N-substituents and took place for all studied sequences. On the other hand, depolymerization is significantly influenced by the molecular structure of the main-chain repeat units. For instance, hexyl carbamate main-chain motifs block unzipping and can therefore be used to control the degradation of specific sequence sections. Interestingly, the partially degraded polymers can also be repaired; for example by using a combination of N,N'-disuccinimidyl carbonate with a secondary amine building-block. Overall, these findings open up interesting new avenues for chain-healing and sequence editing.

Covalent Post-Assembly Modification: A Synthetic Multipurpose Tool in Supramolecular Chemistry

The use of covalent post-assembly modification (PAM) in supramolecular chemistry has grown significantly in recent years, to the point where PAM is now a versatile synthesis tool for tuning, modulating, and expanding the functionality of self-assembled complexes and materials. PAM underpins supramolecular template-synthesis strategies, enables modular derivatization of supramolecular assemblies, permits the covalent 'locking' of unstable structures, and can trigger controlled structural transformations between different assembled morphologies. This Review discusses key examples of PAM spanning a range of material classes, including discrete supramolecular complexes, self-assembled soft nanostructures and hierarchically ordered polymeric and framework materials. As such, we hope to highlight how PAM has continued to evolve as a creative and functional addition to the synthetic chemist's toolbox for constructing bespoke self-assembled complexes and materials.

Disassembly of polymeric nanoparticles with enzyme-triggered polymer unzipping: polyelectrolyte complexes vs. amphiphilic nanoassemblies

Alkaline phosphatase (ALP) responsive polymers, which can unzip from head to tail are reported. Hydrophilic and hydrophobic modification of the polymer was carried out for the formation of a polyelectrolyte complex and an amphiphilic nanoassembly, respectively, which offered distinct enzyme-triggered disassembly kinetics.

Polymer with Competing Depolymerization Pathways: Chain Unzipping versus Chain Scission

Interest in triggered depolymerization is growing, driven by needs in sustainable plastics, self-healing materials, controlled release, and sensory amplification. For many triggered depolymerization reactions, the rate-limiting step does not directly involve the stimulus, and therefore, depolymerization kinetics exhibit only weak or no correlation to the concentration and reactivity of the stimulus. However, for many applications, a direct relationship between the stimulus and the depolymerization kinetics is desired. Here we designed, synthesized, and studied a polymer in which a nucleophile-induced chain scission (NICS) mechanism competes with the chain unzipping pathway. We find that the choice of the chain end functionality and the character of the nucleophile determines which of these is the predominant pathway. The NICS pathway was found to be dependent on the stimulus concentration, in contrast to the chain unzipping mechanism. We demonstrate transferability of these molecular-scale, structure-property relationships to nanoscale materials by formulating the polymers into host nanoparticles.

Poly(carboxypyrrole)s That Depolymerize from Head to Tail in the Solid State in Response to Specific Applied Signals

This Article describes the design, synthesis, and analysis of a new class of polymer that is capable of depolymerizing continuously, completely, and cleanly from head to tail when a detection unit on the head of the polymer is exposed to a specific applied signal. The backbone of this polymer consists of 1,3-disubstituted pyrroles and carboxy linkages similar to polyurethanes. Diverse side chains or reactive end-groups can be introduced readily, which provides modular design of polymer structure. The designed depolymerization mechanism proceeds through spontaneous release of carbon dioxide and azafulvene in response to a single triggering reaction with the detection unit. These poly(carboxypyrrole)s depolymerize readily in nonpolar environments, and even in the bulk as solid-state plastics.

Construction from Destruction: Hydrogel Formation from Triggered Depolymerization-Based Release of an Enzymatic Catalyst

Biomimetic systems that undergo macroscopic phase transformations by transducing and amplifying external cues are highly desirable for applications such as self-healing. Here, we report self-assembly of polyelectrolyte complexes into a vesicular structure that can accommodate hydrophilic guest molecules, including enzymes. Triggered depolymerization of one of the polyelectrolyte molecules in the complex causes the vesicle to disassemble and release its contents. Such a triggered release of enzymes causes molecular-scale events to be amplified due to the enzyme's catalytic properties. This feature has been utilized to demonstrate construction of hydrogels from the destruction of nanoscopic polymeric vesicles. The design principles developed here are broadly adaptable to other triggerable depolymerization motifs reported in the literature.

Dynamic pH responsivity of triazole-based self-immolative linkers

Gating the release of chemical payloads in response to transient signals is an important feature of ‘smart’ delivery systems. Herein, we report a triazole-based self-immolative linker that can be reversibly paused or slowed and restarted throughout its elimination cascade in response to pH changes in both organic and organic-aqueous solvents. The linker is conveniently prepared using the alkyne–azide cycloaddition reaction, which introduces a 1,4-triazole ring that expresses a pH-sensitive intermediate during its elimination sequence. Using a series of model compounds, we demonstrate that this intermediate can be switched between active and dormant states depending on the presence of acid or base, cleanly gating the release of payload in response to a fluctuating external stimulus.

Triazole-based self-immolative linkers can be reversibly paused and restarted throughout their elimination cascades in response to environmental pH changes.

Sequencing of Sequence-Defined Oligourethanes via Controlled Self-Immolation

Sequence-defined polymers show promise for biomimetics, self-assembly, catalysis, and information storage, wherein the primary structure begets complex chemical processes. Here we report the solution-phase and the high-yielding solid-phase syntheses of discrete oligourethanes and methods for their self-immolative sequencing, resulting in rapid and robust characterization of this class of oligomers and polymers, without the use of MS/MS. Crucial to the sequencing is the inherent reactivity of the terminal alcohol to "unzip" the oligomers, in a controlled and iterative fashion, releasing each monomer as a 2-oxazolidinone. By monitoring the self-immolation reaction via LC/MS, an applied algorithm rapidly produces the sequence of the oligourethane. Not only does this process provide characterization of structurally complex molecules, it works as a reader of molecular information.