From Petrochemical Polyurethanes to Biobased Polyhydroxyurethanes

Synthesis of polyurethanes through the oxidative decarboxylation of oxamic acids: a new gateway toward self-blown foams

Polyurethane (PU) thermoplastics and thermosets were prepared through the step-growth polymerization of in situ generated polyisocyanates through the decarboxylation of polyoxamic acids, in the presence of phenyliodine diacetate (PIDA), and polyols. The CO2 produced during the reaction allowed the access to self-blown polyurethane foams through an endogenous chemical blowing. The acetic acid released from ligand exchange at the iodine center was also shown to accelerate the polymerization reaction, avoiding the recourse to an additional catalyst. Changing simple parameters during the production process allowed us to access flexible PU foams with a wide range of properties.

Reprocessable, Self-Healing, and Creep-Resistant Covalent Adaptable Network Made from Chain-Growth Monomers with Dynamic Covalent Thionourethane and Disulfide Cross-Links

We synthesized covalent adaptable networks (CANs) made from chain-growth comonomers using nonisocyanate thiourethane chemistry. We derivatized glycidyl methacrylate with cyclic dithiocarbonate (GMA-DTC), did a free-radical polymerization of n-hexyl methacrylate with GMA-DTC to obtain a statistical copolymer with 8 mol % GMA-DTC, and cross-linked it with difunctional amine. The dynamic covalent thionourethane and disulfide bonds lead to CAN reprocessability with full recovery of the cross-link density; the temperature dependence of the rubbery plateau modulus indicates that associative character dominates the dynamic response. The CAN exhibits complete self-healing at 110 °C with tensile property recovery and excellent creep resistance at 90-100 °C. Stress relaxation at 140-170 °C reveals an activation energy of 105 ± 6 kJ/mol, equal to the activation energy (Ea) of the CAN poly(n-hexyl methacrylate) backbone α-relaxation. We hypothesize that CANs with exclusively or predominantly associative dynamics have their stress-relaxation Ea defined by the α-relaxation Ea. This hypothesis is supported by stress relaxation studies on a similar poly(n-lauryl methacrylate)-based CAN.

Preparation of Non-Isocyanate Polyurethanes from Mixed Cyclic-Carbonated Compounds: Soybean Oil and CO2-Based Poly(ether carbonate)

This study presents the synthesis and characterization of non-isocyanate polyurethanes (NIPU) derived from the copolymerization of cyclic-carbonated soybean oil (CSBO) and cyclic carbonate (CC)-terminated poly(ether carbonate) (RCC). Using a double-metal cyanide catalyst, poly(ether carbonate) polyol was first synthesized through the copolymerization of carbon dioxide and propylene oxide. The terminal hydroxyl group was then subjected to a substitution reaction with a five-membered CC group using glycerol-1,2-carbonate and oxalyl chloride, yielding RCC. Attempts to prepare NIPU solely using RCC and diamine were unsuccessful, possibly due to the low CC functionality and the aminolysis of RCC's linear carbonate repeating units. However, when combined with CSBO, solid NIPUs were successfully obtained, exhibiting good thermal stability along with enhanced mechanical properties compared to conventional CSBO-based NIPU formulations. Overall, this study underscores the potential of leveraging renewable resources and carbon capture technologies to develop sustainable NIPUs with tailored properties, thereby expanding their range of applications.

Utilization of Plant Oils for Sustainable Polyurethane Adhesives: A Review

The utilization of plant oils as a renewable resource for the production of polyurethane adhesives presents a promising way to improve sustainability and reduce environmental impact. This review explores the potential of various vegetable oils, including waste oils, in the synthesis of polyurethanes as an alternative to conventional petroleum-based raw materials. The investigation highlights the environmental challenges associated with conventional polyurethane production and highlights the benefits of switching to bio-renewable oils. By examining the feasibility and potential applications of vegetable oil-based polyurethanes, this study emphasizes the importance of further research and development in this area to realize the full potential of sustainable polyurethane adhesives. Further research and development in this area are key to overcoming the challenges and realizing the full potential of plant-oil-based polyurethanes in various industrial applications.

Application of Modified Seed Oils of Selected Fruits in the Synthesis of Polyurethane Thermal Insulating Materials

The use of alternative raw material sources in polyurethane chemistry is necessary given the limited supply of fossil fuels, their rising prices and the concern for sustainability. The production of biopolyols from edible vegetable oils such as rapeseed oil, soybean oil or sunflower oil is often proposed. In order to avoid conflict with the global food economy, non-edible or waste oils are hoped to find application in chemical synthesis. The possibility of using oils from selected fruit seeds to obtain biopolyols is analyzed in this manuscript. Five biopolyols were obtained from watermelon, cherry, black currant, grape and pomegranate fruit seeds using the transesterification reaction of the oils with triethanolamine. Thermal insulating polyurethane foams were then obtained by replacing 75% of petrochemical polyol with the biopolyols in polyurethane systems. Based on an analysis of the foaming process, it was found that the incorporation of triethanolamine molecules into the biopolyols causes a catalytic effect. The use of such biopolyols allows eliminating the catalyst from a polyurethane foam formulation. The polyurethane biofoams obtained with the pomegranate-seed-based biopolyol were characterized by the highest content of closed cells (45 vol.%). The lowest content was found for the foams containing the currant-seed-based biopolyol (9%). The foams were characterized by thermal conductivity coefficients between 32 and 35 kW/m·K and densities of approximately 40 kg/m3. Good dimensional stability and compressive strength between 100 and 250 kPa make them suitable for use in construction.

Innovations in applications and prospects of non-isocyanate polyurethane bioplastics

Currently, conventional plastics are necessary for a variety of aspects of modern daily life, including applications in the fields of healthcare, technology, and construction. However, they could also contain potentially hazardous compounds like isocyanates, whose degradation has a negative impact on both the environment and human health. Therefore, researchers are exploring alternatives to plastic which is sustainable and environmentally friendly without compromising its mechanical and physical features. This review study highlights the production of highly eco-friendly bioplastic as an efficient alternative to non-biodegradable conventional plastic. Bioplastics are produced from various renewable biomass sources such as plant debris, fatty acids, and oils. Poly-addition of di-isocyanates and polyols is a technique employed over decades to produce polyurethanes (PUs) bioplastics from renewable biomass feedstock. The toxicity of isocyanates is a major concern with the above-mentioned approach. Novel green synthetic approaches for polyurethanes without using isocyanates have been attracting greater interest in recent years to overcome the toxicity of isocyanate-containing raw materials. The polyaddition of cyclic carbonates (CCs) and polyfunctional amines appears to be the most promising method to obtain non-isocyanate polyurethanes (NIPUs). This method results in the creation of polymeric materials with distinctive and adaptable features with the elimination of harmful compounds. Consequently, non-isocyanate polyurethanes represent a new class of green polymeric materials. In this review study, we have discussed the possibility of creating novel NIPUs from renewable feedstocks in the context of the growing demand for efficient and ecologically friendly plastic products.

Dynamic PEG-PLA/Hydroxyurethane Networks Based on Imine Bonds as Reprocessable Elastomeric Biomaterials

The development of dynamic covalent chemistry opens the way to the design of materials able to be reprocessed by an internal exchange reaction under thermal stimulus. Imine exchange differs from other exchange reactions by its relatively low temperature of activation. In this study, amine-functionalized star-shaped PEG-PLA and an aldehyde-functionalized hydroxyurethane modifier were combined to produce PEG-PLA/hydroxyurethane networks incorporating imine bonds. The thermal and mechanical properties of these new materials were evaluated as a function of the initial ratio of amine/aldehyde used during synthesis. Rheological analyses highlighted the dynamic behavior of these vitrimers at moderate temperature (60-85 °C) and provided the flow activation energies. Additionally, the reprocessability of these PEG-PLA/hydroxyurethane vitrimers was assessed by comparing the material properties before reshaping and after three reprocessing cycles (1 ton, 1 h, 70 °C). Hence, these materials can easily be designed to satisfy a specific medical application without properties loss. This work opens the way to the development of a new generation of dynamic materials combining degradable PEG-PLA copolymers and hydroxyurethane modifiers, which could find applications in the shape of medical devices on-demand under mild conditions.

Recent Advancements in Polyurethane-based Tissue Engineering

In tissue engineering, polyurethane-based implants have gained significant traction because of their high compatibility and inertness. The implants therefore show fewer side effects and lasts longer. Also, the mechanical properties can be tuned and morphed into a particular shape, owing to which polyurethanes show immense versatility. In the last 3 years, scientists have devised methods to enhance the strength of and induce dynamic properties in polyurethanes, and these developments offer an immense opportunity to use them in tissue engineering. The focus of this review is on applications of polyurethane implants for biomedical application with detailed analysis of hard tissue implants like bone tissues and soft tissues like cartilage, muscles, skeletal tissues, and blood vessels. The synthetic routes for the preparation of scaffolds have been discussed to gain a better understanding of the issues that arise regarding toxicity. The focus here is also on concerns regarding the biocompatibility of the implants, given that the precursors and byproducts are poisonous.

Sustainable cycloaliphatic polyurethanes: from synthesis to applications

Polyurethanes (PUs) are a versatile and major polymer family, mainly produced via polyaddition between polyols and polyisocyanates. A large variety of fossil-based building blocks is commonly used to develop a wide range of macromolecular architectures with specific properties. Due to environmental concerns, legislation, rarefaction of some petrol fractions and price fluctuation, sustainable feedstocks are attracting significant attention, e.g., plastic waste and biobased resources from biomass. Consequently, various sustainable building blocks are available to develop new renewable macromolecular architectures such as aromatics, linear aliphatics and cycloaliphatics. Meanwhile, the relationship between the chemical structures of these building blocks and properties of the final PUs can be determined. For instance, aromatic building blocks are remarkable to endow materials with rigidity, hydrophobicity, fire resistance, chemical and thermal stability, whereas acyclic aliphatics endow them with oxidation and UV light resistance, flexibility and transparency. Cycloaliphatics are very interesting as they combine most of the advantages of linear aliphatic and aromatic compounds. This original and unique review presents a comprehensive overview of the synthesis of sustainable cycloaliphatic PUs using various renewable products such as biobased terpenes, carbohydrates, fatty acids and cholesterol and/or plastic waste. Herein, we summarize the chemical modification of the main sustainable cycloaliphatic feedstocks, synthesis of PUs using these building blocks and their corresponding properties and subsequently present their major applications in hot-topic fields, including building, transportation, packaging and biomedicine.

Climate change challenges, plant science solutions

Climate change is a defining challenge of the 21st century, and this decade is a critical time for action to mitigate the worst effects on human populations and ecosystems. Plant science can play an important role in developing crops with enhanced resilience to harsh conditions (e.g. heat, drought, salt stress, flooding, disease outbreaks) and engineering efficient carbon-capturing and carbon-sequestering plants. Here, we present examples of research being conducted in these areas and discuss challenges and open questions as a call to action for the plant science community.

Biodegradation of renewable polyurethane foams in marine environments occurs through depolymerization by marine microorganisms

Accumulation of plastics in the Earth's oceans is causing widespread disruption to marine ecosystems. To help mitigate the environmental burden caused by non-degradable plastics, we have previously developed a commercially relevant polyurethane (PU) foam derived from renewable biological materials that can be depolymerized into its constituent monomers and consumed by microorganisms in soil or compost. Here we demonstrate that these same PU foams can be biodegraded by marine microorganisms in the ocean and by isolated marine microorganisms in an ex situ seawater environment. Using Fourier-transform infrared (FTIR) spectroscopy, we tracked molecular changes imparted by microbial breakdown of the PU polymers; and utilized scanning electron microscopy (SEM) to demonstrate the loss of physical structure associated with colonization of microorganisms on the PU foams. We subsequently enriched, isolated, and identified individual microorganisms, from six marine sites around San Diego, CA, that are capable of depolymerizing, metabolizing, and accumulating biomass using these PU foams as a sole carbon source. Analysis using SEM, FTIR, and gas chromatography-mass spectrometry (GCMS) confirmed that these microorganisms depolymerized the PU into its constitutive diols, diacids, and other PU fragments. SEM and FTIR results from isolated organismal biodegradation experiments exactly matched those from ex situ and ocean biodegradation samples, suggesting that these PU foam would undergo biodegradation in a natural ocean environment by enzymatic depolymerization of the PU foams and eventual uptake of the degradation products into biomass by marine microorganisms, should these foams unintentionally end up in the marine environment, as many plastics do.

Polyol-Mediated Synthesis of V2O5-WO3/TiO2 Catalysts for Low-Temperature Selective Catalytic Reduction with Ammonia

We demonstrated highly efficient selective catalytic reduction catalysts by adopting the polyol process, and the prepared catalysts exhibited a high nitrogen oxide (NO_X) removal efficiency of 96% at 250 °C. The V₂O₅ and WO₃ catalyst nanoparticles prepared using the polyol process were smaller (~10 nm) than those prepared using the impregnation method (~20 nm), and the small catalyst size enabled an increase in surface area and catalytic acid sites. The NO_X removal efficiencies at temperatures between 200 and 250 °C were enhanced by approximately 30% compared to those of the catalysts prepared using the conventional impregnation method. The NH₃-temperature-programmed desorption and H₂-temperature-programmed reduction results confirmed that the polyol process produced more surface acid sites at low temperatures and enhanced the redox ability. The in situ Fourier-transform infrared spectra further elucidated the fast absorption of NH₃ and its reduction with NO and O₂ on the prepared catalyst surfaces. This study provides an effective approach to synthesizing efficient low-temperature SCR catalysts and may contribute to further studies related to other catalytic systems.

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Finding alternatives to diminish plastic pollution has become one of the main challenges of modern life. A few alternatives have gained potential for a shift toward a more circular and sustainable relationship with plastics. Biodegradable polymers derived from bio- and fossil-based sources have emerged as one feasible alternative to overcome inconveniences associated with the use and disposal of non-biodegradable polymers. The biodegradation process depends on the environment's factors, microorganisms and associated enzymes, and the polymer properties, resulting in a plethora of parameters that create a complex process whereby biodegradation times and rates can vary immensely. This review aims to provide a background and a comprehensive, systematic, and critical overview of this complex process with a special focus on the mesophilic range. Activity toward depolymerization by extracellular enzymes, biofilm effect on the dynamic of the degradation process, CO2 evolution evaluating the extent of biodegradation, and metabolic pathways are discussed. Remarks and perspectives for potential future research are provided with a focus on the current knowledge gaps if the goal is to minimize the persistence of plastics across environments. Innovative approaches such as the addition of specific compounds to trigger depolymerization under particular conditions, biostimulation, bioaugmentation, and the addition of natural and/or modified enzymes are state-of-the-art methods that need faster development. Furthermore, methods must be connected to standards and techniques that fully track the biodegradation process. More transdisciplinary research within areas of polymer chemistry/processing and microbiology/biochemistry is needed.

Preparation of Biobased Nonisocyanate Polyurethane/Epoxy Thermoset Materials Using Depolymerized Native Lignin

Polyurethane polymers are found in a wide range of material applications. However, the toxic nature of isocyanates used in their formulation is a major concern; hence, more environmentally friendly alternatives are of high interest in the search for new sustainable polymer materials. In this work, we present the preparation of isocyanate-free polyurethane/epoxy hybrid thermosets with a high biobased content (85-90 wt %). The isocyanate-free polyurethanes were based on polyhydroxyurethanes (PHUs) prepared from depolymerized native lignin, which we refer to as lignin hydrogenolysis oil (LHO). The LHO was functionalized with epichlorohydrin to yield the epoxidized structure (LHO-GE), which was in turn reacted with CO₂ to form the cyclocarbonated species (LHO-CC). Blends of the LHO-CC and glycerol diglycidyl ether (GDGE) were cured to produce hybrid PHU/epoxy (LHO-CC/GDGE) thermosets. Thermosetting materials with flexural moduli of 4.5 GPa and flexural strengths of 160 MPa were produced by optimizing the mass ratio of the two main components and the triamine hardener. These novel biobased hybrid materials outperformed the corresponding epoxy-only thermosets and comparable hybrid PHU/epoxy materials produced from petrochemicals.

Unlocking Molecular Secrets in a Monomer-Assembly-Promoted Zn-Metalated Catalytic Porous Organic Polymer for Light-Responsive CO2 Insertion

Anthropogenic carbon dioxide (CO₂) emission is soaring day by day due to fossil fuel combustion to fulfill the daily energy requirements of our society. The CO₂ concentration should be stabilized to evade the deadly consequences of it, as climate change is one of the major consequences of greenhouse gas emission. Chemical fixation of CO₂ to other value-added chemicals requires high energy due to its stability at the highest oxidation state, creating a tremendous challenge to the scientific community to fix CO₂ and prevent global warming caused by it. In this work, we have introduced a novel monomer-assembly-directed strategy to design va isible-light-responsive conjugated Zn-metalated porous organic polymer (Zn@MA-POP) with a dynamic covalent acyl hydrazone linkage, via a one-pot condensation between the self-assembled monomer 1,3,5-benzenetricarbohydrazide (TPH) and a Zn complex (Zn@COM). We have successfully explored as-synthesized Zn@MA-POP as a potential photocatalyst in visible-light-driven CO₂ photofixation with styrene epoxide (SE) to styrene carbonate (SC). Nearly 90% desired product (SC) selectivity has been achieved with our Zn@MA-POP, which is significantly better than that for the conventional Zn@TiO₂ (∼29%) and Zn@gC₃N₄ (∼26%) photocatalytic systems. The excellent light-harvesting nature with longer lifetime minimizes the radiative recombination rate of photoexcited electrons as a result of extended π-conjugation in Zn@MA-POP and increased CO₂ uptake, eventually boosting the photocatalytic activity. Local structural results from a first-shell EXAFS analysis reveals the existence of a Zn(N₂O₄) core structure in Zn@MA-POP, which plays a pivotal role in activating the epoxide ring as well as capturing the CO₂ molecules. An in-depth study of the POP-CO₂ interaction via a density functional theory (DFT) analysis reveals two feasible interactions, Zn@MA-POP-CO₂-A and Zn@MA-POP-CO₂-B, of which the latter has a lower relative energy of 0.90 kcal/mol in comparison to the former. A density of states (DOS) calculation demonstrates the lowering of the LUMO energy (EL) of Zn@MA-POP by 0.35 and 0.42 eV, respectively, for the two feasible interactions, in comparison to Zn@COM. Moreover, the potential energy profile also unveils the spontaneous and exergonic photoconversion pathways for the SE to SC conversion. Our contribution is expected to spur further interest in the precise design of visible-light-active conjugated porous organic polymers for CO₂ photofixation to value-added chemicals.

Synthesis of Nonisocyanate Poly(hydroxy)urethanes from Bis(cyclic carbonates) and Polyamines

Nonisocyanate polyurethane materials with pending alcohol groups in the polymeric chain were synthesized by polyaddition reaction of bis(cyclic carbonates) onto diamines. For the platform molecule, 1,4-butanediol bis(glycidyl ether carbonate) (BGBC, 1) was used. The polyaddition reaction of 1 onto a wide range of diamines with different electronic and physical properties was explored. All PHUs were obtained quantitatively after 16 h at 80 °C temperature in MeCN as solvent. The low nucleophilicity of L-lysine has proven unable to ring-open the cyclic carbonate and, thus, no reaction occurred. The addition of DBU or TBD as the catalyst was tested and allows the obtention of the desired PHU. However, the presence of strong bases also led to the formation of polyurea fragments in the new PHU. The different poly(hydroxyurethane) materials were characterized using a wide range of spectroscopic techniques such as NMR, IR, MALDI-ToF, and using GPC studies. The thermal properties of the NIPUs were investigated by DSC and TGA analyses. Moreover, reactions employing different monomer ratios were performed, obtaining novel hydroxycarbamate compounds. Finally, sequential and one-pot experiments were also carried out to synthesize the PHUs polymers in one-step reaction.

High-Performance Nonisocyanate Thermoplastic Polythiourethane with High Hydrogen Bond Content

Nonisocyanate polyurethane (NIPU) has been extensively studied because of its sustainability potential. However, the low reactivity of five-membered cyclocarbonates with amines and the side reactions at higher temperatures always sacrifice the performance of NIPUs. In this work, a bisphenol-S cyclic thiocarbonate and different amino-terminated dimer-acid polyamides (DAPAs) were used to prepare nonisocyanate polythiourethanes (SPTU-DAs). Wherein bisphenol-S acts as a hard segment due to a π-π package, plentiful hydrogen bonds introduced by DAPA units induce crystallization and nanophase separation. They both endow the NIPUs with high mechanical performance. Meanwhile, active cyclic thiocarbonate, instead of cyclic carbonate, ensures rapid synthesis under mild conditions without side reactions. The experimental results of DSC, WAXD, and DMA confirmed the existence of crystallization of SPTU-DAs. The as-prepared thermoplastic polythiourethane has a maximum strength of more than 10 MPa, which is stronger than those of the cross-linked nonisocyanate polythiourethanes reported. It is of key significance to obtain the high performance of nonisocyanate polythiourethanes.

Design and Synthesis of Conducting Polymer Bio-Based Polyurethane Produced from Palm Kernel Oil

Polyurethane (PU) is a unique polymer that has versatile processing methods and mechanical properties upon the inclusion of selected additives. In this study, a freestanding bio-based polyurethane film the screen-printed electrode (SPE) was prepared by the solution casting technique, using acetone as solvent. It was a one-pot synthesis between major reactants, namely, palm kernel oil-based polyol and 4,4-methylene diisocyanate. The PU has strong adhesion on the SPE surface. The synthesized bio-based polyurethane was characterized using thermogravimetry analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy (FTIR), surface area analysis by field emission scanning electron microscope, and cyclic voltammetry. Cyclic voltammetry was employed to study electrocatalytic properties of SPE-polyurethane towards oxidation of PU. Remarkably, SPE-PU exhibited improved anodic peak current as compared to SPE itself using the differential pulse voltammetry method. Furthermore, the formation of urethane linkages (-NHC(O) backbone) after polymerization was analyzed using FTIR and confirmed by the absence of peak at 2241 cm-1 attributed to the sp-hydridized carbons atoms of C≡C bonds. The glass transition temperature of the polyurethane was detected at 78.1°C.

From Impossible to Possible: Atom-Economic Polymerization of Low Strain Five-Membered Carbonates

The direct ring-opening polymerization (ROP) of propylene carbonate (PC) only affords oligomers with substantial unidentified by-products, which hinders the efficient utilization of PC. Through detailed studies, for the first time, a careful mechanism involving the in situ release of propylene oxide (PO) from PC decarboxylation is proposed. Further, we report a novel strategy of copolymerization of PC/cyclic anhydrides via in situ capture of the formed intermediates. Results show that PC is successfully transformed into polyesters. Especially for the ring-opening alternating copolymerization (ROAC) of PC/phthalic anhydride (PA), a variety of advantages are manifold: i) slow-release of PO ensuring a perfectly alternating structure; ii) quantitative and fast transformation of PC; iii) visualization of polymerization process by a CO₂ pressure gauge. Of importance, through tandem polymerizations, PC is fully transformed into polyesters and polycarbonates concurrently, thus achieving PC utilization with a high atom-economy.

Rationally Designed Eugenol-Based Chain Extender for Self-Healing Polyurethane Elastomers

Bio-based polyurethane (PU) has recently drawn our attention due to the increasing interest in sustainability and the risks involved with petroleum depletion. Herein, bio-based self-healing PU with a novel polyol, i.e., eugenol glycol dimer (EGD), was synthesized and characterized for the first time. EGD was designed to have pairs of primary, secondary, and aromatic alcohols, which all are able to be involved in urethane bond formation and to show self-healing and antioxidant effects. EGD was incorporated into a mixture of the prepolymer of polyol (tetramethylene ether glycol) and 4,4'-methylene diphenyl diisocyanate to synthesize PU. EGD-PU showed excellent self-healing properties (99.84%), and it maintained its high self-healing property (84.71%) even after three repeated tests. This dramatic self-healing was induced through transcarbamoylation by the pendant hydroxyl groups of EGD-PU. The excellent antioxidant effect of EGD-PU was confirmed by 2,2-diphenyl-1-picrylhydrazyl analysis. Eugenol-based EGD is a promising polyol chain extender that is required in the production of bio-based, self-healing, and recyclable polyurethane; therefore, EGD-PU can be applied to bio-based self-healable films or coating materials as a substitute for petroleum-based PU.

Nanotechnological Manipulation of Nutraceuticals and Phytochemicals for Healthy Purposes: Established Advantages vs. Still Undefined Risks

Numerous foods, plants, and their bioactive constituents (BACs), named nutraceuticals and phytochemicals by experts, have shown many beneficial effects including antifungal, antiviral, anti-inflammatory, antibacterial, antiulcer, anti-cholesterol, hypoglycemic, immunomodulatory, and antioxidant activities. Producers, consumers, and the market of food- and plant-related compounds are increasingly attracted by health-promoting foods and plants, thus requiring a wider and more fruitful exploitation of the healthy properties of their BACs. The demand for new BACs and for the development of novel functional foods and BACs-based food additives is pressing from various sectors. Unfortunately, low stability, poor water solubility, opsonization, and fast metabolism in vivo hinder the effective exploitation of the potential of BACs. To overcome these issues, researchers have engineered nanomaterials, obtaining food-grade delivery systems, and edible food- and plant-related nanoparticles (NPs) acting as color, flavor, and preservative additives and natural therapeutics. Here, we have reviewed the nanotechnological transformations of several BACs implemented to increase their bioavailability, to mask any unpleasant taste and flavors, to be included as active ingredients in food or food packaging, to improve food appearance, quality, and resistance to deterioration due to storage. The pending issue regarding the possible toxic effect of NPs, whose knowledge is still limited, has also been discussed.

New Kind of Lignin/Polyhydroxyurethane Composite: Green Synthesis, Smart Properties, Promising Applications, and Good Reprocessability and Recyclability

A new kind of biobased material named lignin-containing polyhydroxyurethane (LPHU) is prepared from bis(6-membered cyclic carbonate) (BCC), dimer fatty diamine, and lignin for the first time. The preparation strategy is isocyanate-free, solvent-free, and catalyst-free, representing a green and environmentally friendly method to access polyurethane (PU)/lignin composites. The resultant LPHUs possess dual networks: a dynamic covalent network and a hydrogen bonding network, exhibiting superior mechanical strength, high thermal stability, excellent reprocessability/recyclability, and smart properties such as shape memory and self-healing. Potential application investigations indicate that the resultant LPHUs can be not only used for smart packaging label fabrication for heat-sensitive commodities but also further combined with natural cellulose paper to prepare paper-based electromagnetic shielding materials with high mechanical performance.

Bio-based Poly(hydroxy urethane)s: Synthesis and Pre/Post-Functionalization

New and emerging demand for polyurethane (PU) continues to rise over the years. The harmful isocyanate binding agents and their integrated PU products are at the height of environmental concerns, in particular PU (macro and micro) pollution and their degradation problems. Non-isocyanate poly(hydroxy urethane)s (NIPUs) are sustainable and green alternatives to conventional PUs. Since the introduction of NIPU in 1957, the market value of NIPU and its hybridized materials has increased exponentially in 2019 and is expected to continue to rise in the coming years. The secondary hydroxyl groups of these NIPU's urethane moiety have revolutionized them by allowing for adequate pre/post functionalization. This minireview highlights different strategies and advances in pre/post-functionalization used in biobased NIPU. We have performed a comprehensive evaluation of the development of new ideas in this field to achieve more efficient synthetic biobased hybridized NIPU processes through selective and kinetic understanding.

Biobased Nonisocyanate Polyurethanes as Recyclable and Intrinsic Self-Healing Coating with Triple Healing Sites

Polymer coatings having high amounts of renewable carbon and self-healing properties are highly sought after in a sustainability perspective. We report here the development of bio-/CO₂-derived nonisocyanate polyurethane (NIPU) coatings which are recyclable and healable via three different types of healing mechanisms. These NIPUs contain furan rings in their main chain which after cross-linking with bismaleimides form organogels having a thermo-reversible sol-gel transition and solvent-borne coatings with improved properties. Judicial selection of the bismaleimide cross-linker structure enabled us to produce recyclable and intrinsic healable coatings mediated by heat (thermo-healing), moisture (moisture-healing), and, more interestingly, dry conditions at room temperature (self-healing). The intrinsic moisture-healing property of NIPU-based coatings is unprecedented and is mainly due to the presence of hydroxyl functionalities in the NIPU structure. The uniqueness of these cross-linked biobased NIPU as recyclable coatings having triple healing sites present in their structure gives these materials potential for sustainable and functional applications.

Biobased polyurethanes for biomedical applications

Polyurethanes (PUs) are a major family of polymers displaying a wide spectrum of physico-chemical, mechanical and structural properties for a large range of fields. They have shown suitable for biomedical applications and are used in this domain since decades. The current variety of biomass available has extended the diversity of starting materials for the elaboration of new biobased macromolecular architectures, allowing the development of biobased PUs with advanced properties such as controlled biotic and abiotic degradation. In this frame, new tunable biomedical devices have been successfully designed. PU structures with precise tissue biomimicking can be obtained and are adequate for adhesion, proliferation and differentiation of many cell's types. Moreover, new smart shape-memory PUs with adjustable shape-recovery properties have demonstrated promising results for biomedical applications such as wound healing. The fossil-based starting materials substitution for biomedical implants is slowly improving, nonetheless better renewable contents need to be achieved for most PUs to obtain biobased certifications. After a presentation of some PU generalities and an understanding of a biomaterial structure-biocompatibility relationship, recent developments of biobased PUs for non-implantable devices as well as short- and long-term implants are described in detail in this review and compared to more conventional PU structures.

Jatropha Oil as a Substituent for Palm Oil in Biobased Polyurethane

Polyurethanes (PUs) are unique polymers that can be tailored to suit certain applications and are increasingly used in many industrial fields. Petrochemicals are still used as the main compound to synthesize PUs. Today, environmental concerns arise in the research and technology innovations in developing PUs, especially from vegetable polyols which are having an upsurge. These are driven by the uncertainty and fluctuations of petroleum crude oil price and availability. Jatropha has become a promising substituent to palm oil so as to reduce the competition of food and nonfood in utilizing this natural resource. Apart from that, jatropha will solve the problem related to the European banning of palm oil. Herein, we review the literature on the synthesis of PUs using different vegetable oils and compare it with jatropha oil and its nanocomposites reinforced with cellulose nanocrystals. Given the potential of vegetable oil PUs in many industrial applications, we expect that they will increase commercial interest and scientific research to bring these materials to the market soon.