Straightforward ARGET ATRP for the Synthesis of Primary Amine Polymethacrylate with Improved Chain-End Functionality under Mild Reaction Conditions

FADH2-mediated radical polymerization amplification for microRNA-21 detection

For early diagnosis of disease, ultrasensitive mircoRNA-21 detection has considerable potential. In this paper, an ultra-sensitive fluorescence detection method for microRNA was developed by atom transfer radical polymerization (ATRP). This ATRP reaction was first initiated by using flavin mononucleotide (FADH2). The DNA probe 1 modified with amino group was fixed on the magnetic nanoparticle Fe3O4, and microRNA-21 was added to form the probe 1-microRNA-21. Another carboxy-modified DNA 2 forms a sandwich structure with the bound microRNA-21. Two terminally modified DNA types are used as microRNA probes, using complementary base pairing to form a stable super-sandwich structure between the DNA probe and the microRNA. Under optimal conditions, microRNA was detected in PBS buffer with a detection limit of 0.19 fM. And even in 10% of human serum, microRNA-21 can be detected with a detection limit of 47.8 fM. Results show that this method has high selectivity, efficiency and stability, which broad application prospect in microRNA ultra-sensitive detection.

Targeted downregulation of MYC mediated by a highly efficient lactobionic acid-based glycoplex to enhance chemosensitivity in human hepatocellular carcinoma cells

The chemosensitization of tumor cells by gene therapy represents a promising strategy for hepatocellular carcinoma (HCC) treatment. In this regard, HCC-specific and highly efficient gene delivery nanocarriers are urgently needed. For this purpose, novel lactobionic acid-based gene delivery nanosystems were developed to downregulate c-MYC expression and sensitize tumor cells to low concentration of sorafenib (SF). A library of tailor-made cationic glycopolymers, based on poly(2-aminoethyl methacrylate hydrochloride) (PAMA) and poly(2-lactobionamidoethyl methacrylate) (PLAMA) were synthesized by a straightforward activators regenerated by electron transfer atom transfer radical polymerization. The nanocarriers prepared with PAMA₁₁₄-co-PLAMA₂₀ glycopolymer were the most efficient for gene delivery. These glycoplexes specifically bound to the asialoglycoprotein receptor and were internalized through the clathrin-coated pit endocytic pathway. c-MYC expression was significantly downregulated by MYC short-hairpin RNA (MYC shRNA), resulting in efficient inhibition of tumor cells proliferation and a high levels apoptosis in 2D and 3D HCC-tumor models. Moreover, c-MYC silencing increased the sensitivity of HCC cells to SF (IC₅₀ for MYC shRNA+ SF 1.9 μM compared to 6.9 μM for control shRNA + SF). Overall, the data obtained demonstrated the great potential of PAMA₁₁₄-co-PLAMA₂₀/MYC shRNA nanosystems combined with low doses of SF for the treatment of HCC.

Nanofluidic Model Membrane for the Single-Molecule Observation of Membrane Proteins

Membrane proteins play essential roles in the cell, and they constitute one of the most important targets of drugs. Studying membrane proteins in a controlled model membrane environment can provide unambiguous, quantitative information on their molecular properties and functions. However, reconstituting membrane proteins in a model system poses formidable technological challenges. Here, we developed a novel model membrane platform for highly sensitive observation of membrane proteins by combining a micropatterned lipid membrane and a nanofluidic channel. A micropatterned model membrane was generated by lithographically integrating a polymerized lipid bilayer and a natural (fluid) lipid bilayer. A nanofluidic channel having a defined thickness was formed between the fluid bilayer and a polydimethylsiloxane (PDMS) slab by attaching the polymeric bilayer and PDMS slab using an adhesion layer composed of silica nanoparticles that are coated with a biocompatible polymer brush. As we reconstituted rhodopsin (Rh), a G-protein-coupled receptor (GPCR), from a detergent-solubilized state into the fluid bilayer, only successfully reconstituted Rh molecules diffused laterally in the lipid bilayer and migrated into the nanogap junction, where they could be observed with a vastly improved signal-to-background ratio. The nanogap junction effectively separates the sites of reconstitution and observation and provides a novel platform for studying the molecular properties and functions of membrane proteins at the single-molecular level.

Nonionic star polymers with upper critical solution temperature in aqueous solutions

Novel UCST star poly(2-ureido methacrylates) synthesized via the ARGET ATRP technique showed enhanced trapping abilities of model drug molecules.

Assemblies of Polyacrylonitrile-Derived Photoactive Polymers as Blue and Green Light Photo-Cocatalysts for Cu-Catalyzed ATRP in Water and Organic Solvents

Photoluminescent nanosized quasi-spherical polymeric assemblies prepared by the hydrothermal reaction of polyacrylonitrile (PAN), ht-PLPPAN, were demonstrated to have the ability to photo-induce atom transfer radical polymerization (ATRP) catalyzed by low, parts per million concentrations of CuII complex with tris(2-pyridylmethyl)amine (TPMA). Such photo induced ATRP reactions of acrylate and methacrylate monomers were performed in water or organic solvents, using ht-PLPPAN as the photo-cocatalyst under blue or green light irradiation. Mechanistic studies indicate that ht-PLPPAN helps to sustain the polymerization by facilitating the activation of alkyl bromide species by two modes: 1) green or blue light-driven photoreduction of the CuII catalyst to the activating CuI form, and 2) direct activation of dormant alkyl bromide species which occurs only under blue light. The photoreduction of the CuII complex by ht-PLPPAN was confirmed by linear sweep voltammetry performed under illumination. Analysis of the polymerization kinetics in aqueous media indicated even though CuI complexes comprised only 1-1.4% of all Cu species at equilibrium, they exhibited high activation rate constant and activated the alkyl bromide initiators five to six orders of magnitude faster than ht-PLPPAN.

Tuning the Thermoresponsive Behavior of Surface-Attached PNIPAM Networks: Varying the Crosslinker Content in SI-ATRP

The synthesis and thermoresponsive properties of surface-attached poly(N-isopropylacrylamide)-co-N,N'-methylene bisacrylamide (PNIPAM-co-MBAM) networks are investigated. The networks are formed via SI-ARGET-ATRP ("grafting-from") on thiol-based initiator-functionalized gold films. This method is reliable, well controlled, fast, and applicable to patterned surfaces (e.g., nanopores) for networks with dry thicknesses >20 nm. Surface-attached PNIPAM-co-MBAM gels are swollen below their volume phase transition temperature but above collapse without complete expulsion of water (retain ∼50 vol %). The swelling/collapse transition is studied using complementary SPR and QCMD techniques. The ratio between swollen and collapsed heights characterizes the thermoresponsive behavior and is shown to not depend on network height but to vary with MBAM content. The higher the proportion of the crosslinker, the lower the magnitude of the phase transition, until all responsiveness is lost at 5 mol % MBAM. The temperature range of the transition is broadened for more crosslinked PNIPAM-co-MBAM gels but remains centered around 32 °C. Upon reswelling, less crosslinked networks display sharp transitions, while for those containing ≥3 mol % MBAM, transitions remain broad. This tunable behavior persists for gels on nanostructured gold surfaces. Investigating PNIPAM-co-MBAM networks on gold plasmonic nanowell arrays is a starting point for expanding their scope as thermo-controlled nanoactuators.

Development of sensitive and accurate solid-phase microextraction procedure for preconcentration of As(III) ions in real samples

We synthesized the poly(methyl methacrylate-co-2-aminoethyl methacrylate (PMaema) amphiphilic copolymer in a form of solid phase adsorbent. Then it was used for separation, preconcentration and determination of trace amount of As(III) ions from foods and waters with hydride generation atomic absorption spectrometry. The PMaema was characterized by fourier transform infrared spectrometer and nuclear magnetic resonance spectrometer. The adsorption of As(III) to the PMaema was also supported using computational chemistry studies. The experimental parameters (pH, PMaema amount, adsorption time and ethanol volume) were optimized using a three-level Box-Behnken design with four experimental factors. We observed linear calibration curve for the PMaema amount in the 10-500 ng L-1 range (R2 = 0.9956). Limit of detection, preconcentration factor and sorbent capacity of PMaema were equal to 3.3 ng L-1, 100 and 75.8 mg g-1, respectively. The average recoveries (spiked at 50 ng L-1) changes in the range of 91.5-98.6% with acceptable relative standard deviation less than 4.3%. After validation studies, the method was successfully applied for separation, preconcentration and determination of trace amount of As(III) from foods and waters.

Polymer Microparticles with Defined Surface Chemistry and Topography Mediate the Formation of Stem Cell Aggregates and Cardiomyocyte Function

Surface-functionalized microparticles are relevant to fields spanning engineering and biomedicine, with uses ranging from cell culture to advanced cell delivery. Varying topographies of biomaterial surfaces are also being investigated as mediators of cell-material interactions and subsequent cell fate. To investigate competing or synergistic effects of chemistry and topography in three-dimensional cell cultures, methods are required to introduce these onto microparticles without modification of their underlying morphology or bulk properties. In this study, a new approach for surface functionalization of poly(lactic acid) (PLA) microparticles is reported that allows decoration of the outer shell of the polyesters with additional polymers via aqueous atom transfer radical polymerization routes. PLA microparticles with smooth or dimpled surfaces were functionalized with poly(poly(ethylene glycol) methacrylate) and poly[N-(3-aminopropyl)methacrylamide] brushes, chosen for their potential abilities to mediate cell adhesion. X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry analysis indicated homogeneous coverage of the microparticles with polymer brushes while maintaining the original topographies. These materials were used to investigate the relative importance of surface chemistry and topography both on the formation of human immortalized mesenchymal stem cell (hiMSCs) particle-cell aggregates and on the enhanced contractility of cardiomyocytes derived from human-induced pluripotent stem cells (hiPSC-CMs). The influence of surface chemistry was found to be more important on the size of particle-cell aggregates than topographies. In addition, surface chemistries that best promoted hiMSC attachment also improved hiPSC-CM attachment and contractility. These studies demonstrated a new route to obtain topo-chemical combinations on polyester-based biomaterials and provided clear evidence for the predominant effect of surface functionality over micron-scale dimpled topography in cell-microparticle interactions. These findings, thus, provide new guiding principles for the design of biomaterial interfaces to direct cell function.

Surfactant Pyrolysis-Guided in Situ Fabrication of Primary Amine-Rich Ordered Mesoporous Phenolic Resin Displaying Efficient Heavy Metal Removal

A unique strategy for the direct preparation of primary amine-functionalized ordered mesoporous phenolic resin (NH₂-MPRN) was presented. The essence of our approach avoided the side reactions in the m-nitrophenol-formaldehyde resol synthesis using m-nitrophenol and formaldehyde as the monomers. Importantly, these resols can efficiently assemble with triblock copolymer F127 to form a mesostructured composite. The final prolysis treatment removed the F127 template to produce ordered mesopores, and meanwhile, the accompanying reductive gas in situ transferred the nitro groups to primary amines. Notably, the obtained NH₂-MPRN material delivered fast toxic hexavalent chromium sorption kinetics with high uptake capacity and selectivity due to a mesoporous structure, high amine availability, and a hydrophobic surface. Interestingly, almost all of adsorbed chromium species existed as low-toxic trivalent chromium in the resin owing to the cooperative detoxification process by the neighboring primary amines and phenolic hydroxyl groups. Also, it showed the reversible detoxification for at least five times.

Star-shaped poly(2-aminoethyl methacrylate)s as non-viral gene carriers: Exploring structure-function relationship

Gene therapy shows much promise in treating many inheritable and acquired diseases, but challenges remain in the design of gene vectors with low cytotoxicity and high transfection efficiency. Elucidating the structure-function relationship of non-viral polymer-based gene carriers is crucial for improving the design and performance of safe and effective gene therapy approaches. The cationic poly(2-aminoethyl methacrylate) (PAEM) containing primary amino side groups is an attractive carrier for gene delivery. This study focuses on four PAEM-based polycations with well-defined molecular weight and chain architecture. The polymers include three cyclodextrin (CD)-cored star-shaped PAEM polycations (s-PAEM), synthesized by atom transfer radical polymerization (ATRP), and a linear PAEM polycation (l-PAEM), synthesized via activators regenerated by electron transfer (ARGET) ATRP. All four polycations could condense plasmid DNA (pDNA) into spherical polyplexes with small sizes (<200 nm). The polyplexes showed excellent stability during storage and were able to resist electrostatic destabilization. The cytotoxicity of these polycations was depended on dose and target cell type and was influenced by molecular weight and chain architecture, yet the polyplexes showed little cytotoxicity regardless of the type of polymer used. The transfection efficiency of PAEM polycations was highly dependent upon molecular weight, molecular architecture (star versus linear) and target cell type. In most cases, polyplexes formed by high-molecular-weight s-PAEM performed the best. Moreover, at a specific N/P ratio, the transfection efficiency mediated by s-PAEM was higher in MCF-7 breast cancer cells than in COS-7 fibroblast-like cells, but such cell-type dependence was not obvious for l-PAEM. These findings indicate that the star-shaped PAEM polycations could be promising gene carriers for gene therapy applications.

Poly(ethylene glycol)- block-poly(2-aminoethyl methacrylate hydrochloride)-Based Polyplexes as Serum-Tolerant Nanosystems for Enhanced Gene Delivery

Incorporation of poly(ethylene glycol) (PEG) into polyplexes has been used as a promising approach to enhance their stability and reduce unwanted interactions with biomolecules. However, this strategy generally has a negative influence on cellular uptake and, consequently, on transfection of target cells. In this work, we explore the effect of PEGylation on biological and physicochemical properties of poly(2-aminoethyl methacrylate) (PAMA)-based polyplexes. For this purpose, different tailor-made PEG- b-PAMA block copolymers, and the respective homopolymers, were synthesized using the controlled/"living" radical polymerization method based on activators regenerated by electron transfer atom transfer radical polymerization. The obtained data show that PEG- b-PAMA-based polyplexes exhibited a much better transfection activity/cytotoxicity relationship than the corresponding non-PEGylated nanocarriers. The best formulation, prepared with the largest block copolymer (PEG₄₅- b-PAMA₁₆₈) at a 25:1 N/P ratio, presented a 350-fold higher transfection activity in the presence of serum than that obtained with polyplexes generated with the gold standard bPEI. This higher transfection activity was associated to an improved capability to overcome the intracellular barriers, namely the release from the endolysosomal pathway and the vector unpacking and consequent DNA release from the nanosystem inside cells. Moreover, these nanocarriers exhibit suitable physicochemical properties for gene delivery, namely reduced sizes, high DNA protection, and colloidal stability. Overall, these findings demonstrate the high potential of the PEG₄₅- b-PAMA₁₆₈ block copolymer as a gene delivery system.

Synthesis of chitosan-mimicking cationic glycopolymers by Cu(0)-LRP for efficient capture and killing of bacteria

A schematic representation of the preparation of cationic magnetic glyconanoparticles by Cu(0)-LRP to efficiently capture, kill and separate E. coli from water.

Surface modification of bacterial cellulose aerogels by ARGET ATRP

INTRODUCTION

Bacterial cellulose (BC) aerogels have received more and more attention due to their renewability, biodegradability and other excellent properties in recent years. Modification of BC aerogels using different methods would expand their applications. However, many problems exist for these modifications, such as a low grafting ratio, the larger dosage of metal catalyst required and so on. Activator regeneration by electron transfer (ARGET) for atom transfer radical polymerization (ATRP) is a novel ATRP method which could significantly reduce the amount of metal catalyst required and achieve a high grafting ratio.

METHODS

Novel nanostructured BC aerogels containing epoxy groups were prepared by the ARGET ATRP method. BC aerogels were functionalized with initiating sites by reaction with 2-bromoisobutyryl bromide (BiBBr), and followed by ARGET ATRP reaction with glycidyl methacrylate (GMA) which was catalyzed by copper(II) bromide (CuBr₂) and N,N,N',N,'N"-pentamethyldiethylenetriamine (PMDETA), and then reduced by vitamin C. BC aerogels containing epoxy groups (BC-g-PGMA) were obtained after freeze-drying. The influence factors of the solvent ratio of N,N-dimethyl formamide (DMF)/toluene, monomer concentration, the concentration of CuBr₂, the molar ratio of vitamin C (Vc)/CuBr₂,reaction temperature and time on the grafting ratio were investigated.

RESULTS

The results showed that the optimal DMF and toluene volume ratio was 2:1, the optimal monomer and CuBr₂ concentration were 2 mol/l and 1.5 mmol/l. The optimal molar ratio of PMDETA/CuBr₂ and Vc/CuBr₂ were 4:1 and 1:1. The optimal reaction temperature and time were 60°C and 9 h. Scanning electron microscopy (SEM) images showed that GMA was strongly adhered onto the surface and inside of the BC pellicle.

CONCLUSIONS

GMA was self-grown on the BC surface and achieved the high grafting ratio of 1052.7% under optimal conditions. The BC-g-PGMA aerogels containing the epoxy groups will provide wider application prospects in drug release, enzyme fixed, functional materials and other fields.

ARGET-ATRP synthesis and swelling response of compositionally varied poly(methacrylic acid-co-N,N-diethylaminoethyl methacrylate) polyampholyte brushes

Modifying the composition of polyampholytes, which are comprised of charge-positive and charge-negative repeat units, directly contributes to trade-offs between charge and structure, which are externally regulated by solution pH and added salt. Here, the relative ratio of anionic and cationic comonomers is varied to tailor the stimuli-responsiveness of poly(methacrylic acid-co-N,N-diethylaminoethyl methacrylate) (P(MAA-co-DEAEMA)) brushes to changes in solution pH and an added zwitterion. These systems display a strong dependence on excess repeating units of either type and the random incorporation appears to facilitate self-neutralization of charges. Pseudo-living growth with smooth comonomer incorporation is achieved using activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP), creating well-defined brushes. In situ ellipsometry measurements of solvated brush thickness indicate that at low and high pH, the brushes display polyelectrolyte behavior with a strong compositional dependence, but at intermediate pH values, the brushes show the characteristic collapse attributed to self-neutralization of polyampholytes. The polyampholyte brushes maintain these patterns of behavior across all compositions and in the presence of an added zwitterion, which contributes additional hydrophobic character as evidenced by decreases in the swollen layer thicknesses. The response of the P(MAA-co-DEAEMA) brushes to the organic osmolyte betaine is consistent with its tendency to stabilize proteins and peptides in a kosmotropic fashion. These studies add perspective to efforts to manipulate sequence in polyampholytic polymers, support broader efforts to tailor interfacial soft films for applications in biotechnology and sensing, and understand aggregation and stability of biological polymers.

Preparation, Structure, and Properties of Silk Fabric Grafted with 2-Hydroxypropyl Methacrylate Using the HRP Biocatalyzed ATRP Method

Atom transfer radical polymerization (ATRP) is a “living”/controlled radical polymerization, which is also used for surface grafting of various materials including textiles. However, the commonly used metal complex catalyst, CuBr, is mildly toxic and results in unwanted color for textiles. In order to replace the transition metal catalyst of surface-initiated ATRP, the possibility of HRP biocatalyst was investigated in this work. 2-hydroxypropyl methacrylate (HPMA) was grafted onto the surface of silk fabric using the horseradish peroxidase (HRP) biocatalyzed ATRP method, which is used to improve the crease resistance of silk fabric. The structure of grafted silk fabric was characterized by Fourier transform infrared spectrum, X-ray photoelectron spectroscopy, thermogravimetic analysis, and scanning electron microscopy. The results showed that HPMA was successfully grafted onto silk fabric. Compared with the control silk sample, the wrinkle recovery property of grafted silk fabric was greatly improved, especially the wet crease recovery property. However, the whiteness, breaking strength, and moisture regain of grafted silk fabric decreased somewhat. The present work provides a novel, biocatalyzed, environmentally friendly ATRP method to obtain functional silk fabric, which is favorable for clothing application and has potential for medical materials.

Hybrid Model Membrane Combining Micropatterned Lipid Bilayer and Hydrophilic Polymer Brush

Substrate-supported planar lipid bilayers (SPBs) are being utilized as a versatile model system of the biological membrane. However, the proximity between the solid support and membrane limits utility of SPBs for the functional analyses of membrane proteins. Here, we present a model membrane that can enlarge the distance between the substrate surface and the membrane by combining a stable scaffold of polymerized lipid bilayer with a hydrophilic polymer brush. A micropatterned SPB was generated by the lithographic polymerization of diacetylene lipids and subsequent incorporation of natural (fluid) lipid bilayers. Hydrophilic polymer brush of poly-2-methacryloyloxyethyl phosphorylcholine (poly(MPC)) was formed on the surface of polymeric bilayer by the in situ atom transfer radical polymerization (ATRP) in aqueous solution, in the presence of embedded fluid lipid bilayers. A model membrane protein (Haloquadratum walsbyi bacteriorhodopsin: HwBR) could be reconstituted into the polymer brush-supported bilayers with significantly reduced immobile molecules. Furthermore, the polymer brush terminals could be functionalized by successively polymerizing MPC and 2-aminoethyl methacrylate (AMA). The reactive amine moiety of poly(AMA) enables to conjugate a wide range of biological molecules and surfaces to the membrane. The combination of micropatterned bilayer and polymer brush mimics the two- and three-dimensional structures of the biological membrane, providing a platform to assay membrane proteins in a truly biomimetic environment.

Biosynthetic Polymers as Functional Materials

The synthesis of functional polymers encoded with biomolecules has been an extensive area of research for decades. As such, a diverse toolbox of polymerization techniques and bioconjugation methods has been developed. The greatest impact of this work has been in biomedicine and biotechnology, where fully synthetic and naturally derived biomolecules are used cooperatively. Despite significant improvements in biocompatible and functionally diverse polymers, our success in the field is constrained by recognized limitations in polymer architecture control, structural dynamics, and biostabilization. This Perspective discusses the current status of functional biosynthetic polymers and highlights innovative strategies reported within the past five years that have made great strides in overcoming the aforementioned barriers.

Cyclopentyl methyl ether as a green solvent for reversible-addition fragmentation chain transfer and nitroxide-mediated polymerizations

Cyclopentyl methyl ether (CPME) was successfully used as an environmentally friendly alternative to regularly employed organic solvents (e.g., THF, DMSO, DCM and DMF) for the RAFT and NMP polymerizations of vinyl chloride (VC) and styrene (S).

Temperature and pH dual-responsive poly(vinyl lactam) copolymers functionalized with amine side groups via RAFT polymerization

A series of statistical copolymers based on cyclic N-vinyl lactams and N-vinylformamide were synthesized via RAFT polymerization. Tempertaure/pH dual responsive polymers were obtained via hydrolysis the copolymers in alkaline conditions.

An ATRP-based approach towards water-borne anisotropic polymer–Gibbsite nanocomposites

This paper describes the synthesis of anisotropic polymer–Gibbsite nanocomposites with “muffin-like” morphology via a starved-feed ATRP emulsion polymerisation.

Facile synthesis of well-controlled poly(glycidyl methacrylate) and its block copolymers via SARA ATRP at room temperature

The detailed synthesis of poly(glycidyl methacrylate) (PGMA) by atom transfer radical polymerization (ATRP) using a catalytic system of Fe(0)/Cu(ii)Br₂ at room temperature is reported.