Electronic Interactions and Polymer Effect in the Functionalization and Solvation of Carbon Nanotubes by Pyrene- and Ferrocene-Containing Poly(1-alkyne)s

Assembly of 12-Tungstovanadate-Templated Nanocage and Nanocomposites with Single-Walled Carbon Nanotubes as Anodes in Lithium-Ion Batteries

A new 12-tungstovanadate-templated 3D nanocage framework, Ag₁₀(μ₄-ttz)₄(H₂O)₄(VW₁₂O₄₀) (VW₁₂@MOCF), was designed based on a "molecular library", hydrothermally synthesized, structurally characterized, and explored as anode material for lithium-ion batteries (LIBs). Combination of the structural superiority of VW₁₂@MOCF with the good electrical conductivity of the single-walled carbon nanotubes (SWNTs) renders the VW₁₂@MOCF/SWNT-2 nanocomposite reasonable electrochemical performance and stability as anode materials of LIBs. The successful cooperative fabrication of nanocages and polyoxometalate (POMs) must initiate extensive research interests.

Pyrene-Functionalized Polyacetylenes: Synthesis and Photoluminescence Property

Four pyrene-functionalized polyacetylenes were designed and prepared through a typical post-polymerization modification route, which is the highly efficient reaction between activated ester and primary anime groups. The chemical structures of the resultant polymers were characterized with multiple spectroscopic techniques and the data indicated the successful functionalization of the polyacetylenes. The introduction of the pyrene moieties into the polymer structure allowed us to investigate the interactions between the polymer backbone and side chains. For the mono-substituted polyacetylenes, both the monomer and excimer emission features of the pyrene groups could be recorded, while for the di-substituted polyacetylenes, the fluorescence from the pyrene excimer vanished and the fluorescence intensity from the pyrene monomer decreased, the fluorescence from the polymer chain predominated the emission features. The concomitant energy transfer from the pyrene monomer and excimer to poly(diphenylacetylene) backbone was associated with the underlying mechanism. In addition to the substitution modes, the linkage between the poly(diphenylacetylene) backbone and the pyrene moiety also played a significant role in the determination of the emission species. A long alkyl spacer was beneficial to the pyrene monomer emission while a short one may be helpful to the formation of the excimer and intramolecular energy transfer.

The performances of modified single-walled carbon nanotubes/poly(ether ether ketone) composites prepared by solution blending and melt blending

The modified single-walled carbon nanotubes (m-SWCNTs)/poly(ether ether ketone) (PEEK) composites were prepared by solution blending and melt blending, respectively. The mechanical, dielectric, and frictional performances of the m-SWCNTs/PEEK composites obtained by different processing technic were investigated. The poly(aryl ether ketone)s with pyrene (PAEK-Pys) were synthesized through iridium-catalyzed C−H borylation followed by Suzuki coupling. PAEK-Pys were characterized using ultraviolet–visible spectroscopy, proton nuclear magnetic resonance spectroscopy, and gel permeation chromatography. The polymers were then used for surface modification of pristine SWCNTs. Finally, the m-SWCNTs were used to prepare m-SWCNTs/PEEK composites via co-blending in solution or melt. The mechanical, frictional, and dielectric performance of the m-SWCNTs/PEEK composite by solution blending were better than these in m-SWCNTs/PEEK composite by melt blending. These results suggest that the method of solution blending is more favorable for the dispersion of the SWCNTs in PEEK.

Effectively improving the performance of MWNT/PEEK composite by choosing PAK-Cz as the solubilizer

Improvement of the interfacial compatibility between carbon nanotubes (CNTs) and a polymer matrix is a key problem in the preparation of high-performance CNTs/polymer composites, such as the CNT/poly(ether-ether ketone) (PEEK) composite. Because it contains large conjugated carbazole side chains, PAK-Cz has been shown to have an outstanding dispersive capacity for multi-walled CNTs (MWNTs; 608 mg L−1 in N-methyl pyrrolidone, which is far better than other commonly used poly(aryl ether) solubilizers). Therefore, in this work, PAK-Cz was used for the first time in MWNT/PEEK composites as a solubilizer. A series of MWNT/PEEK composites with the PAK-Cz solubilizer were prepared by simple physical blending. As expected, all of these composites exhibited better performance characteristics, such as mechanical properties, tensile strength, flexural strength and simultaneous toughening effect, than the pure PEEK material and the MWNT/PEEK (without any solubilizer) composites.

Flexible n-type thermoelectric composite films with enhanced performance through interface engineering and post-treatment

Flexible thermoelectric (TE) materials, which are devices that convert thermal gradients to electrical energy, have attracted interest for practical energy-harvesting/recovery applications. However, as compared with p-type materials, the progress on the development of n-type TE flexible materials has been slow due to difficulties involved in n-type doping techniques. This study used high mobility carbon nanotubes (CNTs) to a uniformly mixed hybrid-composite, resulting in an enhanced power factor by increasing electrical conductivity. The energy filtering effect and stoichiometric composition of the material used, bismuth telluride (Bi₂Te₃) correlated to a significant enhancement in TE performance, with a power factor of 225.9 μW m^-1K^-2 at room temperature: a factor of 65 higher than as-fabricated composite film. This paper describes a simplified synthesis for the preparation of the composite film that eliminates time-intensive and cost-prohibitive processing, traditionally seen during extrusion and dicing inorganic manufacturing. The resulting post-annealed composite film consisting of Bi₂Te₃ nanowire and CNTs demonstrate a promising candidate for material that can be used for an n-type TE device that has improved energy conversion efficiency.

Generic Mechanochemical Grafting Strategy toward Organophilic Carbon Nanotubes

Although carbon nanotubes (CNTs) have been produced in industrial scale, their poor dispersibility in organic solvents still imposes a huge challenge for their practical applications. In the present work, we propose a generic mechanochemical grafting strategy to prepare the organo-soluable CNTs, which is facile, efficient, and scalable. Significantly, the solvent spectrum of the CNTs suspension can be simply extended by changing the chemical composition of the grafted elastomer chains. The prospect of the organo-solubale CNTs is demonstrated by the free-standing buckypapers by direct filtration of the CNT colloids. Such buckypapers exhibit great potential as robust and ultraflexible conductors due to the combination of high toughness and stable conductivity under cyclic bending and twisting. Furthermore, this facile surface modification strategy of CNTs also enables remarkable improvement in mechanical properties of CNT-based rubber composites. We envision that the present work offers a facile yet efficient strategy for scalable production of organosoluable CNTs and other nanoparticles, which is of great scientific and technological interest.

Preparation of CO2-switchable graphene dispersions and their polystyrene nanocomposite latexes by direct exfoliation of graphite using hyperbranched polyethylene surfactants

Herein the preparation of CO₂-switchable graphene dispersions by noncovalent exfoliation of graphite in water using a CO₂-switchable star copolymer surfactant is described.

Polymerization of disubstituted acetylenes by monodentate NHC-Pd catalysts

Monodentate NHC-Pd catalyzed efficient polymerization of disubstituted acetylenes to generate polymers with high molecular weight and high thermal stability.

Connecting carbon nanotubes to polyoxometalate clusters for engineering high-performance anode materials

Carbon nanotubes (CNTs) possess excellent structural and electronic properties and have been widely investigated as anode materials. Covalent modification of carbon nanotubes (CNTs) with organosilica-containing polyoxometalate (POM) leads to the formation of the nanocomposite CNTs–SiW₁₁ with high discharge capacity, good capacity retention and cycling stability.

Monosaccharide-functionalized poly(phenylacetylenes): in situ polymerization, hybridization with MWCNTs, and application in the reinforcement of chitosan rods

We report the fabrication of the hybrids of sugar-modified PPAs/MWCNTs, and the reinforcement of chitosan rods with the hybrids.

Molecular recognition at the nanoscale interface within carbon nanotube bundles

Molecular adsorption onto carbon nanotube surfaces is one of the important topics in the science and technology of carbon nanotubes due to their specific 1D structures with very high aspect ratios. In order to reveal the effect of bundles of single-walled carbon nanotubes (SWNTs) on molecular adsorption at the molecular level, we introduce an HPLC system; namely, we fabricated HPLC columns coated with bundled-SWNTs, isolated-SWNTs or graphene as the stationary HPLC phase, and discovered that polycyclic aromatic hydrocarbons having a one-dimensional shape, such as p-terphenyl and anthracene, exhibit an unusually high affinity to the bundled SWNTs compared to that of the isolated SWNTs. In contrast, no such notable specificity was obtained on a graphene-coated HPLC column. These results indicated that grooves with one-dimensional structures formed by the SWNT-bundles provide a favorable spatial geometry for the specific molecular recognition of aromatic hydrocarbons.

Azobenzene-based supramolecular polymers for processing MWCNTs

Photothermally responsive supramolecular polymers containing azobenzene units have been synthesised and employed as dispersants for multi-walled carbon nanotubes (MWCNTs) in organic solvents. Upon triggering the trans-cis isomerisation of the supramolecular polymer intermolecular interactions between MWCNTs and the polymer are established, reversibly affecting the suspensions of the MWCNTs, either favouring it (by heating, i.e. cis→trans isomerisation) or inducing the CNTs' precipitation (upon irradiation, trans→cis isomerisation). Taking advantage of the chromophoric properties of the molecular subunits, the solubilisation/precipitation processes have been monitored by UV-Vis absorption spectroscopy. The structural properties of the resulting MWCNT-polymer hybrid materials have been thoroughly investigated via thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and atomic force microscopy (AFM) and modelled with molecular dynamics simulations.

Synthesis of Functional Disubstituted Polyacetylenes Bearing Highly Polar Functionalities via Activated Ester Strategy

We demonstrate a facile synthetic route to functional disubstituted polyacetylenes bearing highly polar groups based on polymer reactions. A pentafluorophenyl (PFP) ester-containing diphenylacetylene was designed and polymerized to obtain PFP activated ester-functionalized disubstituted polyacetylene (P1). P1 was used as a parent polymer to further react separately with diverse amines, giving rise to a series of functional disubstituted polyacetylenes with a chiral moiety and hydroxyl and carboxyl groups in high yields under mild condition. Spectral characterization data indicated that the polymers' structures were well consistent with the expected results. The helicity and emission property of polymers were also studied.

Surface-initiated graft polymerization on multiwalled carbon nanotubes pretreated by corona discharge at atmospheric pressure

Surface-initiated graft polymerization on multi-walled carbon nanotubes pretreated with a corona discharge at atmospheric pressure was explored. The mechanism of the corona-discharge-induced graft polymerization is discussed. The results indicate that MWCNTs were encapsulated by poly(glycidyl methacrylate) (PGMA), demonstrating the formation of PGMA-grafted MWCNTs (PGMA-g-MWCNTs), with a grafting ratio of about 22 wt%. The solubility of PGMA-g-MWCNTs in ethanol was dramatically improved compared to pristine MWCNTs, which could contribute to fabricating high-performance polymer/MWCNTs nanocomposites in the future. Compared with most plasma processes, which operate at low pressures, corona discharge has the merit of working at atmospheric pressure.