Hydrogen Bonded Supramolecular Elastomers: Correlating Hydrogen Bonding Strength with Morphology and Rheology

Preparation and Properties of GMS/HTSF-Modified Waterborne Polyurethane Fluorine-Free Waterproof and Breathable Film

Developing a fluorine-free, durable, high-performance waterproof breathable film for fabrics remains a formidable challenge. In this paper, a strategy for the preparation of fluorine-free, durable, and high-efficiency fabric waterproof and breathable membranes using glyceryl monostearate (GMS)/double-ended hydroxy silicone oil (HTSF)-modified waterborne polyurethane was proposed. The orderly orientation of GMS and HTSF gives the fabric excellent water-repellent properties, and the polyurethane macromolecular chain ensures strong adhesion of long-chain alkanes and silicones to the fabric surface. In this paper, the effects of different GMS contents on the stability, chemical structure, particle size, viscosity, water absorption performance, surface morphology, and XPS of a waterborne polyurethane fluorine-free waterproof and breathable membrane (GHWPU) were studied. At the same time, the application properties of GHWPU-treated fabrics, such as waterproof performance, antifouling performance, surface energy, morphology, and air permeability, were discussed. Through the analysis of SEM and XPS, it was found that the folds on the surface of the film were more and more orderly with the increasing content of GMS, and this orderly distribution of water-repellent groups endowed the film with excellent water-repellent ability. When the GMS content was 28 wt %, the finished fabrics had excellent comprehensive properties such as static contact angle of 141.6°, hydrostatic pressure of 96.7 KPa, resistance to more than 30 washes, and air permeability of 119.3 mm/s.

Synthesis of Novel (Meth)acrylates with Variable Hydrogen Bond Interaction and Their Application in a Clear Viscoelastic Film

Clear viscoelastic films (CVFs) have many applications in the display industry. Acrylic monomers containing a hydrogen bond (H-monomer) are often used in the preparation of CVF to increase the cohesion and form favorable interactions with the display substrate. Common H-monomers face a counterbalance between the glass transition temperature (Tg) and the hydrogen-bonding association constant (Ka). Strong hydrogen bonding often leads to a high Tg and high modulus, which are unfavorable in certain applications such as foldable display. To solve these problems, four types of hydrogen-bonding (meth)acrylic monomers (carbamate acrylate, carbamate methacrylate, urea acrylate, and urea methacrylate) with different Ka and Tg were readily synthesized. Among them, urea acrylates displayed the highest Ka while still maintaining moderate Tg. These H-monomers were copolymerized with 2-ethylhexyl acrylate (EHA) and cross-linked to obtain a series of copolymers (H-copolymers) as pressure-sensitive adhesives. After the characterization of rheology, optics, and peel adhesion, urea-acrylic H-copolymers showed the best overall performance by combining great optical property (>98% in transmittance, < 1% in haze) and mechanical performance (8-12 N/25 mm in peel adhesion, 84-92% in creep recovery). This work provides a new path to prepare acrylic CVF for flexible display application.

Hydrogen-Bond-Driven Peptide Nanotube Formation: A DFT Study

DFT calculations were carried out to examine geometries and binding energies of H-bond-driven peptide nanotubes. A bolaamphiphile molecule, consisting of two N-α amido glycylglycine head groups linked by either one CH2 group or seven CH2 groups, is used as a building block for nanotube self-assembly. In addition to hydrogen bonds between adjacent carboxy or amide groups, nanotube formation is also driven by weak C-H· · ·O hydrogen bonds between a methylene group and the carboxy OH group, and between a methylene group and an amide O=C group. The intratubular O-H· · ·O=C hydrogen bonds account for approximately a third of the binding energies. Binding energies calculated with the wB97XD/DGDZVP method show that the hydrocarbon chains play a stabilizing role in nanotube self-assembly. The shortest nanotube has the length of a single monomer and a diameter than increases with the number of monomers. Lengthening of the tubular structure occurs through intertubular O-H· · ·O=C hydrogen bonds. The average intertubular O-H· · ·O=C hydrogen bond binding energy is estimated to change with the size of the nanotubes, decreasing slightly towards some plateau value near 15 kcal/mol according to the wB97XD/DGDZVP method.

Synthesis and Evaluation of a Silver Nanoparticle/Polyurethane Composite That Exhibits Antiviral Activity against SARS-CoV-2

In this proof-of-concept study, we aim to produce a polyurethane (PU)-based composite that can reduce the amount of viable SARS-CoV-2 virus in contact with the surface of the polymeric film without further interventions such as manual cleaning. Current protocols for maintaining the hygiene of commonly used touchpoints (door handles, light switches, shop counters) typically rely on repeated washing with antimicrobial products. Since the start of the SARS-CoV-2 pandemic, frequent and costly surface sanitization by workers has become standard procedure in many public areas. Therefore, materials that can be retrofitted to touchpoints, yet inhibit pathogen growth for extended time periods are an important target. Herein, we design and synthesise the PU using a one-pot synthetic procedure on a multigram scale from commercial starting materials. The PU forms a robust composite thin film when loaded with 10 wt% silver nanoparticles (AgNPs). The addition of AgNPs increases the ultimate tensile strength, modules of toughness and modulus of elasticity at the cost of a reduced elongation at break when compared to the pristine PU. Comparative biological testing was carried out by the addition of pseudotyped virus (PV) bearing the SARS-CoV-2 beta (B.1.351) VOC spike protein onto the film surfaces of either the pristine PU or the PU nanocomposite. After 24 h without further human intervention the nanocomposite reduced the amount of viable virus by 67% (p = 0.0012) compared to the pristine PU treated under the same conditions. The significance of this reduction in viable virus load caused by our nanocomposite is that PUs form the basis of many commercial paints and coatings. Therefore, we envisage that this work will provide the basis for further progress towards producing a retrofittable surface that can be applied to a wide variety of common touchpoints.

Supramolecular Polycaprolactone-Based Polyurethanes with Thermally Activated Shape-Memory Behavior

In this work, using supramolecular polyurethanes theories, two polycaprolactone-based polyurethanes with 2-ureido-4-[1H]-pyrimidinone (UPy) motifs capable of forming quadruple hydrogen bonds were synthetized and characterized, focusing our attention on their capability to show thermally activated shape-memory response. In particular, ¹H NMR analyses confirmed the chemical structure of the supramolecular polyurethanes, while DSC showed their totally amorphous morphology. DMTA in tensile mode was used to study their thermally activated shape-memory properties. In our case, the UPy units are the switching domains while the network formed by the segregated hard segments is the permanent domain obtained materials with excellent shape-memory response at both 100 and 85 °C. These materials are promising for multi-responsive materials where bio-based and potentially recyclable polymers with excellent shape-memory properties are needed.

Synergetic improvement in the mechanical properties of polyurethanes with movable crosslinking and hydrogen bonds

Polyurethane (PU) materials with movable crosslinking were prepared by a typical two-step synthetic process using an acetylated γ-cyclodextrin (TAcγCD) diol compound. The soft segment of PU is polytetrahydrofuran (PTHF), and the hard segment consists of hexamethylene diisocyanate (HDI) and 1,3-propylene glycol (POD). The synthesized PU materials exhibited the typical mechanical characteristics of a movable crosslinking network, and the presence of hydrogen bonds from the urethane bonds resulted in a synergistic effect. Two kinds of noncovalent bond crosslinking increased the Young's modulus of the material without affecting its toughness. Fourier transform infrared spectroscopy and X-ray scattering measurements were performed to analyze the effect of introducing movable crosslinking on the internal hydrogen bond and the microphase separation structure of PU, and the results showed that the carbonyl groups on TAcγCD could form hydrogen bonds with the PU chains and that the introduction of movable crosslinking weakened the hydrogen bonds between the hard segments of PU. When stretched, the movable crosslinking of the PU materials suppressed the orientation of polymer chains (shish-kebab orientation) in the tensile direction. The mechanical properties of the movable crosslinked PU materials show promise for future application in the industrial field.

Recent Advances in High-strength and High-toughness Polyurethanes Based on Supramolecular Interactions

Recent developments in supramolecular chemistry have generated increasing interest in supramolecular polymers and opened a window for the exploitation of various supramolecular polymeric materials and their multifunctional composites. High-performance polyurethanes,...

Ultrahigh-water-content biocompatible gelatin-based hydrogels: Toughened through micro-sized dissipative morphology as an effective strategy

Fabrication of simultaneously robust and superabsorbent gelatin-based hydrogels for biomedical applications still remains a challenge due to lack of locally dissipative points in the presence of large water content. Here, we apply a synthesis strategy through which water absorbency and energy dissipative points are separated, and toughening mechanism is active closely at the crack tip. For this, gelatin-based microgels (GeMs) were synthesized in a way that concentrated supramolecular interactions were present to increase the energy necessary to propagate a macroscopic crack. The microgels were interlocked to each other via both temporary hydrophobic associations and permanent covalent crosslinks, in which the sacrificial binds sustained the toughness due to the mobility of the junction zones and particles sliding. However, chemical crosslinking points preserved the integrity and fast recoverability of the hydrogel. Hysteresis increased strongly with increasing supramolecular interactions within the network. The prepared hydrogels showed energy loss and swelling ratio up to 3440 J. m^-3 and 830%, respectively, which was not achievable with conventional network fabrication methods. The microgels were also assessed for their in vivo biocompatibility in a rat subcutaneous pocket assay. Results of hematoxylin and eosin (H&E) staining demonstrated regeneration of the tissue around the scaffolds without incorporation of growth factors. Also, vascularization within the scaffolds was observed after 4 weeks implantation. These results indicate that our strategy is a promising method to manipulate those valuable polymers, which lose their toughness and applicability with increasing their water content.

Construction of a thermoreversible chemical crosslinking network – a new exploration for the efficient reusability of commercial rubber

A thermoreversible rubber DSBR was prepared via a reaction between a nitroxide-based crosslinker and commercial styrene–butadiene rubber. Impressive recoveries of mechanical properties of DSBR were achieved for the alkoxyamine crosslinking network.

The effect of chiral end groups on the assembly of supramolecular polyurethanes

We describe the generation of supramolecular polyurethanes and the positive effect that chirality has upon the physical properties of these materials.

Linking interfacial work of deformation from deconvoluted macro-rheological spectrum to early stage healing in selected polyurethanes

The use of rheology and terminal flow relaxation times to predict healing behavior at long healing times is by now quite well accepted. In this work we go one step further and explore the use of macro-rheology (in particular the stored work of deformation) to predict the early stage interfacial healing properties (fracture resistance) of a set of self-healing polyurethanes. The interfacial healing is measured by single edge notch fracture experiments, using short healing times and a low healing temperature to exclude the effect of long range molecular motion on mechanical properties restoration. The systems based on aromatic diisocyanates show high fracture resistance after healing, while very limited restoration of the mechanical properties is observed for aliphatic and cycloaliphatic based polyurethanes. Linear sweep rheology and time-temperature-superposition allow obtaining the macro-rheological master curve and the mechanical relaxation spectra (H(t)). The application of a recently established deconvolution protocol to the H(t) gives the characteristic relaxation times and stored works of deformation associated to individual dynamic processes such as segmental motion, reversible bonds, and terminal flow. It is found that the calculated stored works of deformation related to the reversible bond relaxation reproduce the trend observed by fracture resistance at healed interfaces and reveal a qualitative correspondence between reversible bonds work of deformation and interfacial healing fracture resistance. Moreover, the method seems to point to the existence of a threshold interfacial work of deformation below which no efficient load transfer can be observed.

100th Anniversary of Macromolecular Science Viewpoint: Engineering Supramolecular Materials for Responsive Applications-Design and Functionality

Supramolecular polymers allow access to dynamic materials, where noncovalent interactions can be used to offer both enhanced material toughness and stimuli-responsiveness. The versatility of self-assembly has enabled these supramolecular motifs to be incorporated into a wide array of glassy and elastomeric materials; moreover, the interaction of these noncovalent motifs with their environment has shown to be a convenient platform for controlling material properties. In this Viewpoint, supramolecular polymers are examined through their self-assembly chemistries, approaches that can be used to control their self-assembly (e.g., covalent cross-links, nanofillers, etc.), and how the strategic application of supramolecular polymers can be used as a platform for designing the next generation of smart materials. This Viewpoint provides an overview of the aspects that have garnered interest in supramolecular polymer chemistry, while also highlighting challenges faced and innovations developed by researchers in the field.

A 3D printed drug delivery implant formed from a dynamic supramolecular polyurethane formulation

Prototype drug eluting implants have been 3D printed using a supramolecular polyurethane-PEG formulation. The implants are capable of releasing a pharmaceutical active with effective drug release over a period of up to 8.5 months.

Order–disorder transition in supramolecular polymer combs/brushes with polymeric side chains

Three groups of supramolecular comb/brush polymers with polymeric side chains are developed, showing different mechanical properties and morphologies.

Association and relaxation of supra-macromolecular polymers

This paper describes the structures created by assembling functionalised entangled polymers and the effect these have on the rheology of the material. A polybutadiene (PBd) linear polymer precursor of sufficient molecular weight to be entangled is used. This is end functionalised with the self-associating group 2-ureido-4pyrimidinone (UPy). Interestingly, despite the relatively high molecular weight of the precursor diluting the UPy concentration, the effect on the material's properties is significant. To characterise the assembled microstructure we present linear rheology, extensional non-linear rheology and small angle X-ray scattering (SAXS). The linear rheology shows that the functionalised PBd assembles into large macro-structures where the terminal relaxation time is up to seven orders of magnitude larger than the precursor. The non-linear rheology shows strain-hardening over a broad range of strain-rates. We then show by both SAXS and modelling of the extensional data that there must exist clusters of UPy associations and hence assembled polymers with branched architecture. By modelling the supra-molecular structure as an effective linear polymer, we show that this would be insufficient in predicting the strain-hardening behaviour at lower extension-rates. Therefore, in this flow regime the strain-hardening is likely to be caused by branching. This is backed up by SAXS measurements which show that UPy clusters larger than pair-pair groups exist.

Synthesis and structure/properties characterizations of four polyurethane model hard segments

Four model polyurethane (PU) hard segments were synthesized by reaction of butanol with four typical diisocyanates. The four diisocyanates were aromatic 4,4'-diphenylmethane diisocyanate (4,4'-MDI) and MDI-50 (50% mixture of 2,4'-MDI and 4,4'-MDI), cycloaliphatic 4,4'-dicyclohexylmethane diisocyanate (HMDI) and linear aliphatic 1,6-hexamethylene diisocyanate (HDI). FTIR, 1H NMR, 13C NMR, MS, X-ray and DSC methods were employed to determine their structures and to analyse their crystallization behaviours and hydrogen bonding interactions. Each of the four PU compounds prepared in the present work displays unique spectral characteristics. The FTIR bands and NMR resonance peaks assigned in the four samples thus provide a reliable database and starting point for investigating the relationship between hard segment structure and the crystallization and hydrogen bonding behaviour in more complex-segmented PU compositions.

From supramolecular polymers to multi-component biomaterials

The most striking and general property of the biological fibrous architectures in the extracellular matrix (ECM) is the strong and directional interaction between biologically active protein subunits. These fibers display rich dynamic behavior without losing their architectural integrity. The complexity of the ECM taking care of many essential properties has inspired synthetic chemists to mimic these properties in artificial one-dimensional fibrous structures with the aim to arrive at multi-component biomaterials. Due to the dynamic character required for interaction with natural tissue, supramolecular biomaterials are promising candidates for regenerative medicine. Depending on the application area, and thereby the design criteria of these multi-component fibrous biomaterials, they are used as elastomeric materials or hydrogel systems. Elastomeric materials are designed to have load bearing properties whereas hydrogels are proposed to support in vitro cell culture. Although the chemical structures and systems designed and studied today are rather simple compared to the complexity of the ECM, the first examples of these functional supramolecular biomaterials reaching the clinic have been reported. The basic concept of many of these supramolecular biomaterials is based on their ability to adapt to cell behavior as a result of dynamic non-covalent interactions. In this review, we show the translation of one-dimensional supramolecular polymers into multi-component functional biomaterials for regenerative medicine applications.

Enhancement of microphase ordering and mechanical properties of supramolecular hydrogen-bonded polyurethane networks

Enhanced thermoreversible and mechanical properties in supramolecular polyurethanes have been realised by the incorporation of flexible DBDI derived hard segments.

Balancing Segregation and Complexation in Amphiphilic Copolymers by Architecture and Confinement

Segregation is a well-known principle for micellization, as solvophobic components try to minimize interactions with other entities (such as solvent) by self-assembly. An opposite principle is based on complexation (or coacervation), leading to the coassembly/association of different components. Most cases in the literature rely on only one of these modes, though the classical micellization scheme (such as spherical micelles, wormlike micelles, and vesicles) can be enriched by a subtle balance of segregation and complexation. Because of their counteraction, micellar constructs with unprecedented structure and behavior could be obtained. In this feature, systems are highlighted, which are between both mechanisms, and we study concentration, architecture, and confinement effects. Systems with inter- and intramolecular interactions are presented, and the effects of polymer topology and monomer sequence on the resulting structures are discussed. It is shown that complexation can lead to altered micellization behavior as the complex of one hydrophobic and one hydrophilic component can have a very low surface tension toward the solvent. Then, the more soluble component is enriched at the surface of the complex and acts as a microsurfactant. Although segregation dominates for amphiphilic copolymers in solution, the effect of the complexation can be enhanced by branching (change of architecture). Another possibility to enhance the complexation is by confining copolymers in a (pseudo-) 2D environment (like the one available at liquid-liquid interfaces). These observations show how new structural features can be achieved by tuning the subtle balance between segregation and complexation/solubilization.

Fluoride degradable and thermally debondable polyurethane based adhesive

A polyurethane-based adhesive has been produced that can undergo multiple thermal debonding/bonding cycles and also irreversibly debond through depolymerisation on contact with fluoride ions.

Rheology of nitrile rubber with hybrid crosslinked network composed of covalent bonding and hydrogen bonding

A hybrid crosslinked network composed of covalent bonding and non-covalent bonding was constructed in nitrile rubber (NBR) by using a compound crosslinking agents dicumyl peroxide (DCP) and N,N-methylenebis acrylamide (MBA).

An adhesive elastomeric supramolecular polyurethane healable at body temperature

In this paper, we report the synthesis and healing ability of a non-cytotoxic supramolecular polyurethane network whose mechanical properties can be recovered efficiently (>99%) at the temperature of the human body (37 °C). Rheological analysis revealed an acceleration in the drop of the storage modulus above 37 °C, on account of the dissociation of the supramolecular polyurethane network, and this decrease in viscosity enables the efficient recovery of the mechanical properties. Microscopic and mechanical characterisation has shown that this material is able to recover mechanical properties across a damage site with minimal contact required between the interfaces and also demonstrated that the mechanical properties improved when compared to other low temperature healing elastomers or gel-like materials. The supramolecular polyurethane was found to be non-toxic in a cytotoxicity assay carried out in human skin fibroblasts (cell viability > 94% and non-significantly different compared to the untreated control). This supramolecular network material also exhibited excellent adhesion to pig skin and could be healed completely in situ post damage indicating that biomedical applications could be targeted, such as artificial skin or wound dressings with supramolecular materials of this type.

3D Printing of Biocompatible Supramolecular Polymers and their Composites

A series of polymers capable of self-assembling into infinite networks via supramolecular interactions have been designed, synthesized, and characterized for use in 3D printing applications. The biocompatible polymers and their composites with silica nanoparticles were successfully utilized to deposit both simple cubic structures, as well as a more complex twisted pyramidal feature. The polymers were found to be not toxic to a chondrogenic cell line, according to ISO 10993-5 and 10993-12 standard tests and the cells attached to the supramolecular polymers as demonstrated by confocal microscopy. Silica nanoparticles were then dispersed within the polymer matrix, yielding a composite material which was optimized for inkjet printing. The hybrid material showed promise in preliminary tests to facilitate the 3D deposition of a more complex structure.

Microphase separation induced in the melt of Pluronic copolymers by blending with a hydrogen bonding urea-urethane end-capped supramolecular polymer

Blending with a hydrogen-bonding supramolecular polymer is shown to be a successful novel strategy to induce microphase-separation in the melt of a Pluronic polyether block copolymer. The supramolecular polymer is a polybutadiene derivative with urea-urethane end caps. Microphase separation is analysed using small-angle X-ray scattering and its influence on the macroscopic rheological properties is analysed. FTIR spectroscopy provides a detailed picture of the inter-molecular interactions between the polymer chains that induces conformational changes leading to microphase separation.

Development of solvent-free synthesis of hydrogen-bonded supramolecular polyurethanes

A solvent free ball-milling method for the synthesis of small molecule and oligomeric carbamates is described that is applicable to supramolecular polymer synthesis.

In this work we describe the solvent free synthesis of supramolecular polyurethanes held together by heterocomplementary triple hydrogen bonding. We perform a systematic evaluation on the base catalyzed synthesis of small molecule ureas and carbamates from a range of isocyanates, amines and alcohols in solution and in the solid state using ball milling. These optimized procedures are then shown to be applicable to the synthesis of supramolecular polyurethanes using solvent-free methods.