Utilizing cell-matrix interactions to modulate gene transfer to stem cells inside hyaluronic acid hydrogels

Gene-activated hyaluronic acid-based cryogels for cartilage tissue engineering

Articular cartilage injuries are very frequent lesions that if left untreated may degenerate into osteoarthritis. Gene transfer to mesenchymal stem cells (MSCs) provides a powerful approach to treat these lesions by promoting their chondrogenic differentiation into the appropriate cartilage phenotype. Non-viral vectors constitute the safest gene transfer tools, as they avoid important concerns of viral systems including immunogenicity and insertional mutagenesis. However, non-viral gene transfer usually led to lower transfection efficiencies when compared with their viral counterparts. Biomaterial-guided gene delivery has emerged as a promising alternative to increase non-viral gene transfer efficiency by achieving sustained delivery of the candidate gene into cellular microenvironment. In the present study, we designed hyaluronic acid-based gene-activated cryogels (HACGs) encapsulating a novel formulation of non-viral vectors based on niosomes (P80PX) to promote MSCs in situ transfection. The developed HACG P80PX systems showed suitable physicochemical properties to promote MSCs in situ transfection with very low cytotoxicity. Incorporation of a plasmid encoding for the transcription factor SOX9 (psox9) into HACG P80PX systems led to an effective MSCs chondrogenic differentiation with reduced expression of fibrocartilage and hypertrophic markers. The capacity of the developed systems to restore cartilage extracellular matrix was further confirmed in an ex vivo model of chondral defect.

Non-viral gene delivery to human mesenchymal stem cells: a practical guide towards cell engineering

In recent decades, human mesenchymal stem cells (hMSCs) have gained momentum in the field of cell therapy for treating cartilage and bone injuries. Despite the tri-lineage multipotency, proliferative properties, and potent immunomodulatory effects of hMSCs, their clinical potential is hindered by donor variations, limiting their use in medical settings. To address this challenge, gene delivery technologies have emerged as a promising approach to modulate the phenotype and commitment of hMSCs towards specific cell lineages, thereby enhancing osteochondral repair strategies. This review provides a comprehensive overview of current non-viral gene delivery approaches used to engineer MSCs, highlighting key factors such as the choice of nucleic acid or delivery vector, transfection strategies, and experimental parameters. Additionally, it outlines various protocols and methods for qualitative and quantitative evaluation of their therapeutic potential as a delivery system in osteochondral regenerative applications. In summary, this technical review offers a practical guide for optimizing non-viral systems in osteochondral regenerative approaches. hMSCs constitute a key target population for gene therapy techniques. Nevertheless, there is a long way to go for their translation into clinical treatments. In this review, we remind the most relevant transfection conditions to be optimized, such as the type of nucleic acid or delivery vector, the transfection strategy, and the experimental parameters to accurately evaluate a delivery system. This survey provides a practical guide to optimizing non-viral systems for osteochondral regenerative approaches.

A Review on Chitosan and Cellulose Hydrogels for Wound Dressings

Wound management remains a challenging issue around the world, although a lot of wound dressing materials have been produced for the treatment of chronic and acute wounds. Wound healing is a highly dynamic and complex regulatory process that involves four principal integrated phases, including hemostasis, inflammation, proliferation, and remodeling. Chronic non-healing wounds are wounds that heal significantly more slowly, fail to progress to all the phases of the normal wound healing process, and are usually stalled at the inflammatory phase. These wounds cause a lot of challenges to patients, such as severe emotional and physical stress and generate a considerable financial burden on patients and the general public healthcare system. It has been reported that about 1-2% of the global population suffers from chronic non-healing wounds during their lifetime in developed nations. Traditional wound dressings are dry, and therefore cannot provide moist environment for wound healing and do not possess antibacterial properties. Wound dressings that are currently used consist of bandages, films, foams, patches and hydrogels. Currently, hydrogels are gaining much attention as a result of their water-holding capacity, providing a moist wound-healing milieu. Chitosan is a biopolymer that has gained a lot of attention recently in the pharmaceutical industry due to its unique chemical and antibacterial nature. However, with its poor mechanical properties, chitosan is incorporated with other biopolymers, such as the cellulose of desirable biocompatibility, at the same time having the improved mechanical and physical properties of the hydrogels. This review focuses on the study of biopolymers, such as cellulose and chitosan hydrogels, for wound treatment.

Smart/stimuli-responsive hydrogels: Cutting-edge platforms for tissue engineering and other biomedical applications

Recently, biomedicine and tissue regeneration have emerged as great advances that impacted the spectrum of healthcare. This left the door open for further improvement of their applications to revitalize the impaired tissues. Hence, restoring their functions. The implementation of therapeutic protocols that merge biomimetic scaffolds, bioactive molecules, and cells plays a pivotal role in this track. Smart/stimuli-responsive hydrogels are remarkable three-dimensional (3D) bioscaffolds intended for tissue engineering and other biomedical purposes. They can simulate the physicochemical, mechanical, and biological characters of the innate tissues. Also, they provide the aqueous conditions for cell growth, support 3D conformation, provide mechanical stability for the cells, and serve as potent delivery matrices for bioactive molecules. Many natural and artificial polymers were broadly utilized to design these intelligent platforms with novel advanced characteristics and tailored functionalities that fit such applications. In the present review, we highlighted the different types of smart/stimuli-responsive hydrogels with emphasis on their synthesis scheme. Besides, the mechanisms of their responsiveness to different stimuli were elaborated. Their potential for tissue engineering applications was discussed. Furthermore, their exploitation in other biomedical applications as targeted drug delivery, smart biosensors, actuators, 3D and 4D printing, and 3D cell culture were outlined. In addition, we threw light on smart self-healing hydrogels and their applications in biomedicine. Eventually, we presented their future perceptions in biomedical and tissue regeneration applications. Conclusively, current progress in the design of smart/stimuli-responsive hydrogels enhances their prospective to function as intelligent, and sophisticated systems in different biomedical applications.

Bone Regeneration Using MMP-Cleavable Peptides-Based Hydrogels

Accumulating evidence has suggested the significant potential of chemically modified hydrogels in bone regeneration. Despite the progress of bioactive hydrogels with different materials, structures and loading cargoes, the desires from clinical applications have not been fully validated. Multiple biological behaviors are orchestrated precisely during the bone regeneration process, including bone marrow mesenchymal stem cells (BMSCs) recruitment, osteogenic differentiation, matrix calcification and well-organized remodeling. Since matrix metalloproteinases play critical roles in such bone metabolism processes as BMSC commitment, osteoblast survival, osteoclast activation matrix calcification and microstructure remodeling, matrix metalloproteinase (MMP) cleavable peptides-based hydrogels could respond to various MMP levels and, thus, accelerate bone regeneration. In this review, we focused on the MMP-cleavable peptides, polymers, functional modification and crosslinked reactions. Applications, perspectives and limitations of MMP-cleavable peptides-based hydrogels for bone regeneration were then discussed.

Hyaluronic acid hydrogels, as a biological macromolecule-based platform for stem cells delivery and their fate control: A review

Stem cell-based therapies offer numerous potentials to repair damaged or defective organs. The therapeutic outcomes of human studies, however, fall far short from what is expected. Enhancing stem cells local density and longevity would possibly maximize their healing potential. One promising strategy is to administer stem cells via injectable hydrogels. However, stem cells differentiation process is a delicate matter which is easily affected by various factors such as their interaction with their surrounding materials. Among various biomaterial options for hydrogels' production, hyaluronic acid (HA) has shown great promise. HA is a naturally occurring biological macromolecule, a polysaccharide of large molecular weight which is involved in cell proliferation, cell migration, angiogenesis, fetal development, and tissue function. In the current study we will discuss the applications, prospects, and challenges of HA-based hydrogels in stem cell delivery and fate control.

Thiolactone-Functional Pullulan for In Situ Forming Biogels

Gelation in the presence of cells with minimum cytotoxicity is highly desirable for materials with applications in tissue engineering. Herein, the naturally occurring polysaccharide pullulan is functionalized with thiolactones that undergo ring-opening addition of amines. As a result, the modified pullulan can be cross-linked with diamines and/or amine-containing biological substrates enhancing the system's versatility (e.g., gelatin and cell-binding ligands GHK/GRGDS). Thiolactone degrees of substitution of 2.5 or 5.0 mol % are achieved, and respective hydrogels exhibit mesh sizes of 27.8 to 49.1 nm. Cell proliferation studies on chosen gels (G' ≅ 500 Pa, over 14 days) demonstrate that for normal human dermal fibroblasts (NHDFs), both gelatin and GRGDS equally support cell proliferation, while in the case of hepatocytes (HepG2), the presence of GRGDS and GHK improve cell proliferation 10-fold compared to gelatin. Cells remain viable and in one instance were successfully encapsulated by in situ gelation, altogether confirming the mild and biocompatible nature of this strategy to produce biogels using biologically active substrates as cross-linkers.

Recent Progress on Polysaccharide-Based Hydrogels for Controlled Delivery of Therapeutic Biomolecules

A plethora of applications using polysaccharides have been developed in recent years due to their availability as well as their frequent nontoxicity and biodegradability. These polymers are usually obtained from renewable sources or are byproducts of industrial processes, thus, their use is collaborative in waste management and shows promise for an enhanced sustainable circular economy. Regarding the development of novel delivery systems for biotherapeutics, the potential of polysaccharides is attractive for the previously mentioned properties and also for the possibility of chemical modification of their structures, their ability to form matrixes of diverse architectures and mechanical properties, as well as for their ability to maintain bioactivity following incorporation of the biomolecules into the matrix. Biotherapeutics, such as proteins, growth factors, gene vectors, enzymes, hormones, DNA/RNA, and antibodies are currently in use as major therapeutics in a wide range of pathologies. In the present review, we summarize recent progress in the development of polysaccharide-based hydrogels of diverse nature, alone or in combination with other polymers or drug delivery systems, which have been implemented in the delivery of biotherapeutics in the pharmaceutical and biomedical fields.

Hyaluronic Acid Hydrogel Microspheres for Slow Release Stem Cell Delivery

Cell therapies are hampered by a lack of available delivery systems, resulting in inconsistent outcomes in animal studies and human clinical trials. Hydrogel encapsulants offer a broad range of tunable characteristics in the design of cell delivery vehicles. The focus of the hydrogel field has been on durable encapsulants that provide long-term paracrine function of the cells. However, some cell therapies require cell-to-cell contact in order to elicit their effect. Controlled release microencapsulants would be beneficial in these situations, but appropriate polymers have not been adaptable to microsphere manufacturing because they harden too slowly. We developed and tested a novel microencapsulant formulation (acrylated hyaluronic acid: AHA) with degradation characteristics as a controlled release cell delivery vehicle. The properties of AHA microspheres were evaluated and compared to those of poly(ethylene glycol) diacrylate (PEGDA), a durable hydrogel. AHA microspheres possessed a higher swelling ratio, lower diffusion barrier, faster degradation rate, a lower storage modulus, and a larger average diameter than microspheres composed of PEGDA. Additionally, in vitro cell viability and release and short-term in vivo biocompatibility in immune competent Sprague-Dawley rats was assessed for each microsphere type. Compared to PEGDA, microspheres composed of AHA resulted in significantly less foreign body response in vivo as measured by a lack of cellularity or fibrotic ring in the surrounding tissue and no cellular infiltration into the microsphere. This study illustrates the potential of AHA microspheres as a degradable cell delivery system with superior encapsulated cell viability and biocompatibility with the surrounding tissue.

Physical and mechanical cues affecting biomaterial-mediated plasmid DNA delivery: insights into non-viral delivery systems

BACKGROUND

Whilst traditional strategies to increase transfection efficiency of non-viral systems aimed at modifying the vector or the polyplexes/lipoplexes, biomaterial-mediated gene delivery has recently sparked increased interest. This review aims at discussing biomaterial properties and unravelling underlying mechanisms of action, for biomaterial-mediated gene delivery. DNA internalisation and cytoplasmic transport are initially discussed. DNA immobilisation, encapsulation and surface-mediated gene delivery (SMD), the role of extracellular matrix (ECM) and topographical cues, biomaterial stiffness and mechanical stimulation are finally outlined.

MAIN TEXT

Endocytic pathways and mechanisms to escape the lysosomal network are highly variable. They depend on cell and DNA complex types but can be diverted using appropriate biomaterials. 3D scaffolds are generally fabricated via DNA immobilisation or encapsulation. Degradation rate and interaction with the vector affect temporal patterns of DNA release and transgene expression. In SMD, DNA is instead coated on 2D surfaces. SMD allows the incorporation of topographical cues, which, by inducing cytoskeletal re-arrangements, modulate DNA endocytosis. Incorporation of ECM mimetics allows cell type-specific transfection, whereas in spite of discordances in terms of optimal loading regimens, it is recognised that mechanical loading facilitates gene transfection. Finally, stiffer 2D substrates enhance DNA internalisation, whereas in 3D scaffolds, the role of stiffness is still dubious.

CONCLUSION

Although it is recognised that biomaterials allow the creation of tailored non-viral gene delivery systems, there still are many outstanding questions. A better characterisation of endocytic pathways would allow the diversion of cell adhesion processes and cytoskeletal dynamics, in order to increase cellular transfection. Further research on optimal biomaterial mechanical properties, cell ligand density and loading regimens is limited by the fact that such parameters influence a plethora of other different processes (e.g. cellular adhesion, spreading, migration, infiltration, and proliferation, DNA diffusion and release) which may in turn modulate gene delivery. Only a better understanding of these processes may allow the creation of novel robust engineered systems, potentially opening up a whole new area of biomaterial-guided gene delivery for non-viral systems.

Polymeric Delivery of Therapeutic Nucleic Acids

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

Hydrogel-Based Localized Nonviral Gene Delivery in Regenerative Medicine Approaches-An Overview

Hydrogel-based nonviral gene delivery constitutes a powerful strategy in various regenerative medicine scenarios, as those concerning the treatment of musculoskeletal, cardiovascular, or neural tissues disorders as well as wound healing. By a minimally invasive administration, these systems can provide a spatially and temporarily defined supply of specific gene sequences into the target tissue cells that are overexpressing or silencing the original gene, which can promote natural repairing mechanisms to achieve the desired effect. In the present work, we provide an overview of the most avant-garde approaches using various hydrogels systems for controlled delivery of therapeutic nucleic acid molecules in different regenerative medicine approaches.

Extracellular matrix mechanics regulate transfection and SOX9-directed differentiation of mesenchymal stem cells

Gene delivery within hydrogel matrices can potentially direct mesenchymal stem cells (MSCs) towards a chondrogenic fate to promote regeneration of cartilage. Here, we investigated whether the mechanical properties of the hydrogel containing the gene delivery systems could enhance transfection and chondrogenic programming of primary human bone marrow-derived MSCs. We developed collagen-I-alginate interpenetrating polymer network hydrogels with tunable stiffness and adhesion properties. The hydrogels were activated with nanocomplexed SOX9 polynucleotides to direct chondrogenic differentiation of MSCs. MSCs transfected within the hydrogels showed higher expression of chondrogenic markers compared to MSCs transfected in 2D prior to encapsulation. The nanocomplex uptake and resulting expression of transfected SOX9 were jointly enhanced by increased stiffness and cell-adhesion ligand density in the hydrogels. Further, transfection of SOX9 effectively induced MSCs chondrogenesis and reduced markers of hypertrophy compared to control matrices. These findings highlight the importance of matrix stiffness and adhesion as design parameters in gene-activated matrices for regenerative medicine. STATEMENT OF SIGNIFICANCE: Gene-activated matrices (GAMs) are biodegradable polymer networks integrating gene therapies, and they are promising technologies for supporting tissue regeneration. Despite this interest, there is still limited information on how to rationally design these systems. Here, we provide a systematic study of the effect of matrix stiffness and cell adhesion ligands on gene transfer efficiency. We show that high stiffness and the presence of cell-binding sites promote transfection efficiency and that this result is related to more efficient internalization and trafficking of the gene therapies. GAMs with optimized mechanical properties can induce cartilage formation and result in tissues with better characteristics for articular cartilage tissue engineering as compared to previously described standard methods.

In situ miRNA delivery from a hydrogel promotes osteogenesis of encapsulated mesenchymal stromal cells

Hydrogels are attractive candidates for use in tissue-engineering and the encapsulation and subsequent differentiation of mesenchymal stem/stromal cells (MSCs) is a strategy that holds great promise for the repair and regeneration of bone and cartilage. However, MSCs are well-known for their sensitivity to mechanical cues, particularly substrate stiffness, and so the inherent softness of hydrogels is poorly matched to the mechanical cues that drive efficient osteogenesis. One approach to overcome this limitation is to harness mechanotransductive signalling pathways and override the signals cells receive from their environment. Previous reports demonstrate that mechanosensitive miRNAs, miR-100-5p and miR-143-3p can enhance MSC osteogenesis, using a complex multi-step procedure to transfect, encapsulate and differentiate the cells. In this study, we develop and characterise a facile system for in situ transfection of MSCs encapsulated within a light-crosslinkable gelatin-PEG hydrogel. Comparing the influence of different transfection agents and hydrogel compositions, we show that particle size, charge, and hydrogel mechanical properties all influence the diffusion of embedded transfection agent complexes. By incorporating both MSCs and transfection agents into the hydrogels we demonstrate successful in situ transfection of encapsulated MSCs. Comparing the efficacy of pre- and in situ transfection of miR-100-5p/miR-143-3p on the osteogenic capacity of hydrogel-encapsulated MSCs, our data demonstrates superior mineralisation and osteogenic gene expression following in situ transfections. Overall, we demonstrate a simple, one-pot system for in situ transfection of miRNAs to enhance MSC osteogenic potential and thus demonstrates significant promise to improve the efficiency of MSC differentiation in hydrogels for bone tissue-engineering applications. STATEMENT OF SIGNIFICANCE: Mesenchymal stromal cells (MSCs) are sensitive to cues from their surrounding microenvironment. Osteogenesis is enhanced in MSCs grown on stiffer substrates, but this is limited when using hydrogels for bone tissue-engineering. Modulating pro-osteogenic genes with mechanosensitive microRNAs (miRNAs) represents a potential tool to overcome this challenge. Here we report a hydrogel platform to deliver miRNAs to encapsulated MSCs. We characterise effects of hydrogel composition and transfection agent type on their mobility and transfection efficiency, demonstrating successful in situ transfection of MSCs and showing that miRNAs can significantly enhance osteogenic mineral deposition and marker gene expression. This system was simpler and more effective than conventional 2D transfection prior to encapsulation and therefore holds promise to improve MSC differentiation in bone tissue-engineering.

Microporous annealed particle hydrogel stiffness, void space size, and adhesion properties impact cell proliferation, cell spreading, and gene transfer

Designing scaffolds for polyplex-mediated therapeutic gene delivery has a number of applications in regenerative medicine, such as for tissue repair after wounding or disease. Microporous annealed particle (MAP) hydrogels are an emerging class of porous biomaterials, formed by annealing microgel particles to one another in situ to form a porous bulk scaffold. MAP gels have previously been shown to support and enhance proliferative and regenerative behaviors both in vitro and in vivo. Therefore, coupling gene delivery with MAP hydrogels presents a promising approach for therapy development. To optimize MAP hydrogels for gene delivery, we studied the effects of particle size and stiffness as well as adhesion potential on cell surface area and proliferation and then correlated this information with the ability of cells to become transfected while seeded in these scaffolds. We find that the void space size as well as the presentation of integrin ligands influence transfection efficiency. This work demonstrates the importance of considering MAP material properties for guiding cell spreading, proliferation, and gene transfer. STATEMENT OF SIGNIFICANCE: Microporous annealed particle (MAP) hydrogels are an emerging class of porous biomaterials, formed by annealing spherical microgels together in situ, creating a porous scaffold from voids between the packed beads. Here we investigated the effects of MAP physical and adhesion properties on cell spreading, proliferation, and gene transfer in fibroblasts. Particle size and void space influenced spreading and proliferation, with larger particles improving transfection. MAP stiffness was also important, with stiffer scaffolds increasing proliferation, spreading, and transfection, contrasting studies in nonporous hydrogels that showed an inverse response. Last, RGD ligand concentration and presentation modulated spreading similar to non-MAP hydrogels. These findings reveal relationships between MAP properties and cell processes, suggesting how MAP can be tuned to improve future design approaches.

Pathways Governing Polyethylenimine Polyplex Transfection in Microporous Annealed Particle Scaffolds

Gene delivery using injectable hydrogels can serve as a potential method for regulated tissue regeneration in wound healing. Our microporous annealed particle (MAP) hydrogel has been shown to promote cellular infiltration in both skin and brain wounds, while reducing inflammation. Although the scaffold itself can promote healing, it is likely that other signals will be required to promote healing of hard-to-treat wounds. Gene delivery is one approach to introduce desired bioactive signals. In this study, we investigated how the properties of MAP hydrogels influence non-viral gene delivery of polyethylenimine-condensed plasmid to cells seeded within the MAP gel. From past studies, we found that gene transfer to cells seeded in tissue culture plastic differed from gene transfer to cells seeded inside hydrogel scaffolds. Since MAP scaffolds are generated from hydrogel microparticles that are approximately 100 μm in diameter, they display local characteristics that can be viewed as two-dimensional or three-dimensional to cells. Thus, we sought to study if gene transfer inside MAP scaffolds differed from gene transfer to cells seeded in tissue culture plastic. We sought to understand the roles of the endocytosis pathway, actin and microtubule dynamics, RhoGTPases, and YAP/TAZ on transfection of human fibroblasts.

Biomaterial substrate modifications that influence cell-material interactions to prime cellular responses to nonviral gene delivery

IMPACT STATEMENT

This review summarizes how biomaterial substrate modifications (e.g. chemical modifications like natural coatings, ligands, or functional side groups, and/or physical modifications such as topography or stiffness) can prime the cellular response to nonviral gene delivery (e.g. affecting integrin binding and focal adhesion formation, cytoskeletal remodeling, endocytic mechanisms, and intracellular trafficking), to aid in improving gene delivery for applications where a cell-material interface might exist (e.g. tissue engineering scaffolds, medical implants and devices, sensors and diagnostics, wound dressings).

Nucleic acid delivery to mesenchymal stem cells: a review of nonviral methods and applications

Background

Mesenchymal stem cells (MSCs) are multipotent stem cells that can be isolated and expanded from many tissues, and are being investigated for use in cell therapies. Though MSC therapies have demonstrated some success, none have been FDA approved for clinical use. MSCs lose stemness ex vivo, decreasing therapeutic potential, and face additional barriers in vivo, decreasing therapeutic efficacy. Culture optimization and genetic modification of MSCs can overcome these barriers. Viral transduction is efficient, but limited by safety concerns related to mutagenicity of integrating viral vectors and potential immunogenicity of viral antigens. Nonviral delivery methods are safer, though limited by inefficiency and toxicity, and are flexible and scalable, making them attractive for engineering MSC therapies.

Main text

Transfection method and nucleic acid determine efficiency and expression profile in transfection of MSCs. Transfection methods include microinjection, electroporation, and nanocarrier delivery. Microinjection and electroporation are efficient, but are limited by throughput and toxicity. In contrast, a variety of nanocarriers have been demonstrated to transfer nucleic acids into cells, however nanocarrier delivery to MSCs has traditionally been inefficient. To improve efficiency, plasmid sequences can be optimized by choice of promoter, inclusion of DNA targeting sequences, and removal of bacterial elements. Instead of DNA, RNA can be delivered for rapid protein expression or regulation of endogenous gene expression. Beyond choice of nanocarrier and nucleic acid, transfection can be optimized by priming cells with media additives and cell culture surface modifications to modulate barriers of transfection. Media additives known to enhance MSC transfection include glucocorticoids and histone deacetylase inhibitors. Culture surface properties known to modulate MSC transfection include substrate stiffness and specific protein coating. If nonviral gene delivery to MSCs can be sufficiently improved, MSC therapies could be enhanced by transfection for guided differentiation and reprogramming, transplantation survival and directed homing, and secretion of therapeutics. We discuss utilized delivery methods and nucleic acids, and resulting efficiency and outcomes, in transfection of MSCs reported for such applications.

Conclusion

Recent developments in transfection methods, including nanocarrier and nucleic acid technologies, combined with chemical and physical priming of MSCs, may sufficiently improve transfection efficiency, enabling scalable genetic engineering of MSCs, potentially bringing effective MSC therapies to patients.

Evaluation of different commercial hyaluronic acids as a vehicle for injection of human adipose-derived mesenchymal stem cells

Objective

The main purpose of this study is to evaluate, in vitro, the cytotoxicity of different commercial brands of hyaluronic acids to be used as a vehicle for injection of human adipose-derived mesenchymal stem cells (AD-MSCs).

Methods

AD-MSCs were divided into seven groups: one control group where AD-MSCs were cultivated with phosphate-buffered saline (PBS) and six other groups where AD-MSCs were cultivated with different commercial brands of hyaluronic acid. AD-MSC viability analysis was performed after 4, 24, and 48 h in contact with each treatment, using the trypan staining method on a Countess automated cell counter (Thermo Fisher Scientific).

Results

The results clearly demonstrated a significant difference in cell viability when AD-MSCs were exposed to different hyaluronic acids when compared with the control group.

Conclusion

These data suggest that hyaluronic acid can be used as a vehicle for injection of human AD-MSCs, but caution is needed to choose the best product, aiming at its future therapeutic application.

Hyaluronic acid hydrogel scaffolds loaded with cationic niosomes for efficient non-viral gene delivery

The lack of ideal non-viral gene carriers has motivated the combination of delivery systems and tissue-engineered scaffolds, which may offer relevant advantages such as enhanced stability and reduced toxicity. In this work, we evaluated a new combination between niosome non-viral vectors and hyaluronic acid (HA) hydrogel scaffolds, both widely studied due to their biocompatibility as well as their ability to incorporate a wide variety of molecules. We evaluated three different niosome formulations (niosomes 1, 2 and 3) varying in composition of cationic lipid, helper lipid and non-ionic tensioactives. Niosomes and nioplexes obtained upon the addition of plasmid DNA were characterized in terms of size, polydispersity, zeta potential and ability to transfect mouse bone marrow cloned mesenchymal stem cells (mMSCs) in 2D culture. Niosome 1 was selected for encapsulation in HA hydrogels due to its higher transfection efficiency and the formulation was concentrated in order to be able to incorporate higher amounts of DNA within HA hydrogels. Nioplex-loaded HA hydrogels were characterized in terms of biomechanical properties, particle distribution, nioplex release kinetics and ability to transfect encapsulated mMSCs in 3D culture. Our results showed that nioplex-loaded HA hydrogel scaffolds presented little or no particle aggregation, allowed for extensive cell spreading and were able to efficiently transfect encapsulated mMSCs with high cellular viability. We believe that the knowledge gained through this in vitro model can be utilized to design novel and effective platforms for in vivo local and non-viral gene delivery applications.

Nioplexes encapsulated in HA hydrogel scaffolds present no particle aggregation, incorporate high amount of DNA, allow extensive cell spreading and are able to efficiently transfect mesenchymal stem cells in 3D cultures with high cellular viability.

It's All in the Delivery: Designing Hydrogels for Cell and Non-viral Gene Therapies

Hydrogels provide a regenerative medicine platform with their ability to create an environment that supports transplanted or endogenous infiltrating cells and enables these cells to restore or replace the function of tissues lost to disease or trauma. Furthermore, these systems have been employed as delivery vehicles for therapeutic genes, which can direct and/or enhance the function of the transplanted or endogenous cells. Herein, we review recent advances in the development of hydrogels for cell and non-viral gene delivery through understanding the design parameters, including both physical and biological components, on promoting transgene expression, cell engraftment, and ultimately cell function. Furthermore, this review identifies emerging opportunities for combining cell and gene delivery approaches to overcome challenges to the field.

Regulation of decellularized tissue remodeling via scaffold-mediated lentiviral delivery in anatomically-shaped osteochondral constructs

Cartilage-derived matrix (CDM) has emerged as a promising scaffold material for tissue engineering of cartilage and bone due to its native chondroinductive capacity and its ability to support endochondral ossification. Because it consists of native tissue, CDM can undergo cellular remodeling, which can promote integration with host tissue and enables it to be degraded and replaced by neotissue over time. However, enzymatic degradation of decellularized tissues can occur unpredictably and may not allow sufficient time for mechanically competent tissue to form, especially in the harsh inflammatory environment of a diseased joint. The goal of the current study was to engineer cartilage and bone constructs with the ability to inhibit aberrant inflammatory processes caused by the cytokine interleukin-1 (IL-1), through scaffold-mediated delivery of lentiviral particles containing a doxycycline-inducible IL-1 receptor antagonist (IL-1Ra) transgene on anatomically-shaped CDM constructs. Additionally, scaffold-mediated lentiviral gene delivery was used to facilitate spatial organization of simultaneous chondrogenic and osteogenic differentiation via site-specific transduction of a single mesenchymal stem cell (MSC) population to overexpress either chondrogenic, transforming growth factor-beta 3 (TGF-β3), or osteogenic, bone morphogenetic protein-2 (BMP-2), transgenes. Controlled induction of IL-1Ra expression protected CDM hemispheres from inflammation-mediated degradation, and supported robust bone and cartilage tissue formation even in the presence of IL-1. In the absence of inflammatory stimuli, controlled cellular remodeling was exploited as a mechanism for fusing concentric CDM hemispheres overexpressing BMP-2 and TGF-β3 into a single bi-layered osteochondral construct. Our findings demonstrate that site-specific delivery of inducible and tunable transgenes confers spatial and temporal control over both CDM scaffold remodeling and neotissue composition. Furthermore, these constructs provide a microphysiological in vitro joint organoid model with site-specific, tunable, and inducible protein delivery systems for examining the spatiotemporal response to pro-anabolic and/or inflammatory signaling across the osteochondral interface.

Unifying in vitro and in vivo IVT mRNA expression discrepancies in skeletal muscle via mechanotransduction

The translational efficiency of an in vitro transcribed (IVT) mRNA was measured upon delivery to primary skeletal muscle cells and to a mouse model system, towards the development of a predictive in vitro assay for the screening and validation of intramuscular mRNA-based vaccines. When IVT mRNA was delivered either naked or complexed with novel aminoglycoside-based delivery vehicles, significant differences in protein expression in vitro and in vivo were observed. We hypothesized that this previously anticipated discrepancy was due to differences in the mechanism of IVT mRNA endosomal entry and release following delivery. To address this, IVT mRNA was fluorescently labeled prior to delivery, to visualize its distribution. Colocalization with endosomal markers indicated that different entry pathways were utilized in vivo and in vitro, depending on the delivery vehicle, resulting in variations in protein expression levels. Since extracellular matrix stiffness (ECM) influences mRNA entry, trafficking and release, the effect of mechanotransduction on mRNA expression was investigated in vitro upon delivery of IVT mRNA alone, and complexed with delivery vehicles to skeletal muscle cells grown on ∼10 kPa hydrogels. This in vitro hydrogel model more accurately recapitulated the results obtained in vivo upon IM injection, indicating that this approach may assist in the characterization of mRNA based vaccines.

Photoresponsive self-healing supramolecular hydrogels for light-induced release of DNA and doxorubicin

An azobenzene-containing cyclic dipeptide PAP-DKP-Lys is a photoresponsive low-MW hydrogelator. The gelation process can be triggered with temperature, pH, light, and ionic strength. The resulting self-healing gels can encapsulate dsDNA or an anticancer drug doxorubicin, and release them in a light-dependent manner.

Glycosaminoglycan-Based Biohybrid Hydrogels: A Sweet and Smart Choice for Multifunctional Biomaterials

Glycosaminoglycans (GAGs) govern important functional characteristics of the extracellular matrix (ECM) in living tissues. Incorporation of GAGs into biomaterials opens up new routes for the presentation of signaling molecules, providing control over development, homeostasis, inflammation, and tumor formation and progression. Recent approaches to GAG-based materials are reviewed, highlighting the formation of modular, tunable biohybrid hydrogels by covalent and non-covalent conjugation schemes, including both theory-driven design concepts and advanced processing technologies. Examples of the application of the resulting materials in biomedical studies are provided. For perspective, solid-phase and chemoenzymatic oligosaccharide synthesis methods for GAG-derived motifs, rational and high-throughput design strategies for GAG-based materials, and the utilization of the factor-scavenging characteristics of GAGs are highlighted.

Hydrogel-Based Controlled Delivery Systems for Articular Cartilage Repair

Delivery of bioactive factors is a very valuable strategy for articular cartilage repair. Nevertheless, the direct supply of such biomolecules is limited by several factors including rapid degradation, the need for supraphysiological doses, the occurrence of immune and inflammatory responses, and the possibility of dissemination to nontarget sites that may impair their therapeutic action and raise undesired effects. The use of controlled delivery systems has the potential of overcoming these hurdles by promoting the temporal and spatial presentation of such factors in a defined target. Hydrogels are promising materials to develop delivery systems for cartilage repair as they can be easily loaded with bioactive molecules controlling their release only where required. This review exposes the most recent technologies on the design of hydrogels as controlled delivery platforms of bioactive molecules for cartilage repair.

Recent advances in hyaluronic acid hydrogels for biomedical applications

Hyaluronic acid (HA) is widely used in the design of engineered hydrogels, due to its biofunctionality, as well as numerous sites for modification with reactive groups. There are now widespread examples of modified HA macromers that form either covalent or physical hydrogels through crosslinking reactions such as with click chemistry or supramolecular assemblies of guest-host pairs. HA hydrogels range from relatively static matrices to those that exhibit spatiotemporally dynamic properties through external triggers like light. Such hydrogels are being explored for the culture of cells in vitro, as carriers for cells in vivo, or to deliver therapeutics, including in an environmentally responsive manner. The future will bring new examples of HA hydrogels due to the synthetic diversity of HA.

Ligand-Modified Human Serum Albumin Nanoparticles for Enhanced Gene Delivery

The development of nonviral gene delivery systems is a great challenge to enable safe gene therapy. In this study, ligand-modified nanoparticles based on human serum albumin (HSA) were developed and optimized for an efficient gene therapy. Different glutaraldehyde cross-linking degrees were investigated to optimize the HSA nanoparticles for gene delivery. The peptide sequence arginine-glycine-aspartate (RGD) and the HIV-1 transactivator of transduction sequence (Tat) are well-known as promising targeting ligands. Plasmid DNA loaded HSA nanoparticles were covalently modified on their surface with these different ligands. The transfection potential of the obtained plasmid DNA loaded RGD- and Tat-modified nanoparticles was investigated in vitro, and optimal incubation conditions for these preparations were studied. It turned out that Tat-modified HSA nanoparticles with the lowest cross-linking degree of 20% showed the highest transfection potential. Taken together, ligand-functionalized HSA nanoparticles represent promising tools for efficient and safe gene therapy.

MicroRNA delivery for regenerative medicine

MicroRNA (miRNA) directs post-transcriptional regulation of a network of genes by targeting mRNA. Although relatively recent in development, many miRNAs direct differentiation of various stem cells including induced pluripotent stem cells (iPSCs), a major player in regenerative medicine. An effective and safe delivery of miRNA holds the key to translating miRNA technologies. Both viral and nonviral delivery systems have seen success in miRNA delivery, and each approach possesses advantages and disadvantages. A number of studies have demonstrated success in augmenting osteogenesis, improving cardiogenesis, and reducing fibrosis among many other tissue engineering applications. A scaffold-based approach with the possibility of local and sustained delivery of miRNA is particularly attractive since the physical cues provided by the scaffold may synergize with the biochemical cues induced by miRNA therapy. Herein, we first briefly cover the application of miRNA to direct stem cell fate via replacement and inhibition therapies, followed by the discussion of the promising viral and nonviral delivery systems. Next we present the unique advantages of a scaffold-based delivery in achieving lineage-specific differentiation and tissue development.

Porous hyaluronic acid hydrogels for localized nonviral DNA delivery in a diabetic wound healing model

The treatment of impaired wounds requires the use of biomaterials that can provide mechanical and biological queues to the surrounding environment to promote angiogenesis, granulation tissue formation, and wound closure. Porous hydrogels show promotion of angiogenesis, even in the absence of proangiogenic factors. It is hypothesized that the added delivery of nonviral DNA encoding for proangiogenic growth factors can further enhance this effect. Here, 100 and 60 μm porous and nonporous (n-pore) hyaluronic acid-MMP hydrogels with encapsulated reporter (pGFPluc) or proangiogenic (pVEGF) plasmids are used to investigate scaffold-mediated gene delivery for local gene therapy in a diabetic wound healing mouse model. Porous hydrogels allow for significantly faster wound closure compared with n-pore hydrogels, which do not degrade and essentially provide a mechanical barrier to closure. Interestingly, the delivery of pDNA/PEI polyplexes positively promotes granulation tissue formation even when the DNA does not encode for an angiogenic protein. And although transfected cells are present throughout the granulation tissue surrounding, all hydrogels at 2 weeks, pVEGF delivery does not further enhance the angiogenic response. Despite this, the presence of transfected cells shows promise for the use of polyplex-loaded porous hydrogels for local gene delivery in the treatment of diabetic wounds.

Local and sustained gene delivery in silica-collagen nanocomposites

Local delivery of biomolecules from hydrogels is highly challenging because of their rapid diffusion and degradation. Gene therapy represents an alternative that allows for the prolonged production of proteins by transfected cells. In this study, we have developed nanocomposites consisting of DNA-polyethylenimine-silica nanoparticle complexes coencapsulated with fibroblasts within collagen hydrogels. Through the modulation of the particle size and polyethylenimine molecular weight, it was possible to achieve "in-gel" transfection permitting the sustained production of biomolecules from hydrogels over 1 week. Alternative configurations consisting of particle addition to cellularized gels and cell culture in the presence of complex-containing hydrogels were also investigated. These studies demonstrated that particle encapsulation limits DNA and silica dissemination outside the collagen hydrogels. They also show the key role of cell proliferation within collagen hydrogels on the transfection efficiency. Such nanocomposites therefore constitute promising materials for the development of novel gene delivery systems to promote tissue repair.

Three-dimensional systems for in vitro follicular culture: overview of alginate-based matrices

The in vitro culture of ovarian follicles has provided critical insight into the biology of the follicle and its enclosed oocyte and the physical interaction and communication between the theca and granulosa cells and the oocyte that is necessary to produce meiotically competent oocytes. Various two-dimensional (2D) and three-dimensional (3D) culture systems have been developed to evaluate the effect of growth factors, hormones, extracellular matrix components and culture conditions on follicle development and oocyte growth and maturation. Among these culture systems, 3D systems make it possible to maintain follicle structure and support communication between the various cell compartments within the follicle. In this review article, we will discuss the three main approaches to ovarian follicle culture: 2D attachment systems, 3D floating systems and 3D encapsulated systems. We will specifically emphasise the development of and advances in alginate-based encapsulated systems for in vitro follicle culture.

Non-viral DNA delivery from porous hyaluronic acid hydrogels in mice

The lack of vascularization within tissue-engineered constructs remains the primary cause of construct failure following implantation. Porous constructs have been successful in allowing for vessel infiltration without requiring extensive matrix degradation. We hypothesized that the rate and maturity of infiltrating vessels could be enhanced by complementing the open pore structure with the added delivery of DNA encoding for angiogenic growth factors. Both 100 and 60 μm porous and non-porous hyaluronic acid hydrogels loaded with pro-angiogenic (pVEGF) or reporter (pGFPluc) plasmid nanoparticles were used to study the effects of pore size and DNA delivery on angiogenesis in a mouse subcutaneous implant model. GFP-expressing transfected cells were found inside all control hydrogels over the course of the study, although transfection levels peaked by week 3 for 100 and 60 μm porous hydrogels. Transfection in non-porous hydrogels continued to increase over time corresponding with continued surface degradation. pVEGF transfection levels were not high enough to enhance angiogenesis by increasing vessel density, maturity, or size, although by 6 weeks for all pore size hydrogels more hydrogel implants were positive for vascularization when pVEGF polyplexes were incorporated compared to control hydrogels. Pore size was found to be the dominant factor in determining the angiogenic response with 60 μm porous hydrogels having more vessels/area present than 100 μm porous hydrogels at the initial onset of angiogenesis at 3 weeks. The results of this study show promise for the use of polyplex loaded porous hydrogels to transfect infiltrating cells in vivo and guide tissue regeneration and repair.

Purification and biocompatibility of fermented hyaluronic acid for its applications to biomaterials

Background

Hyaluronic acid (HA) is of importance due to its diverse applications in pharmaceuticals and medical devices such as dermal filler, adhesion barriers, carrier for cells and bioactive molecules as well as scaffold biomaterials for tissue engineering. Evaluations of purification and biocompatibility of HA are required for its applications to biomaterials.

Results

After synthesizing HA by fermentation of streptococcus zooepidemicus for 25 hr, extensively purification of the fermented broth was performed to remove impurities using a filtration process for insoluble components and cells, and diverse adsorbents for soluble impurities. Its in vitro biocompatibility has been evaluated by measurement of cell counting and assay of cell live and dead. 60% yield of white HA powder was obtained, having 15–17 dL/g intrinsic viscosity with a molecular weight of approximately 1,000 kDa. While low molecular weight impurities and insoluble impurities were successfully removed using a ultrafiltration membrane with 50 KDa molecular weight cut, endotoxins, high molecular weight proteins and nucleic acids were removed from the broth by employing adsorbents such as alumina and activated carbons. Alumina showed the best results for the removal of endotoxins, all of the activated carbons were very effective in the removal of high molecular weight proteins and nucleic acids. The purified HA solution showed excellent cell compatibility with no cell damages as observed by both measurement of cell proliferation and observation of cell viability.

Conclusions

We obtained high molecular weight HA with excellent biocompatibility as judged by both measurement of cell proliferation and viability, indicating high possibility of its applications to biomaterials.

Poloxamine/fibrin hybrid hydrogels for non-viral gene delivery

Hydrogels have been widely investigated for localized, sustained gene delivery because of the similarity of their physical properties to native extracellular matrix and their ability to be formed under mild conditions amenable to the incorporation of bioactive molecules. The objective of this study was to develop bioactive hydrogels composed of macromolecules capable of enhancing the efficiency of non-viral vectors. Hybrid hydrogels were prepared by simultaneous enzymatic and Michael-type addition crosslinking of reduced fibrinogen and an acrylated amphiphilic block copolymer, Tetronic T904, in the presence of dithiothreitol (DTT) and thrombin. T904/fibrin hydrogels degraded by surface erosion in the presence of plasmin and provided sustained release of polyplex vectors up to an order of magnitude longer than pure fibrin gel control. In addition, the rate of gel degradation and time-course of polyplex vector release were readily controlled by varying the T904/fibrinogen ratio in the gel composition. When added to transfected neuroblastoma (N2A) cells, both native T904 itself and hydrogel degradation products significantly increased polyplex transfection efficiency with minimal effect on cell viability. To evaluate gel-based transfection, N2A cells encapsulated in small fibrin clusters were covered by or suspended within polyplex-loaded hydrogels. Cells progressively degraded and invaded the hybrid hydrogels, exhibiting increasing gene expression over 2 weeks and then diminishing but persistent gene expression for over 1 month. In conclusion, these results demonstrate that T904/fibrin hybrid hydrogels can be promising tissue engineering scaffolds that provide local, controlled release of non-viral vectors in combination with the generation of bioactive gel degradation products that actively enhance vector efficiency. Copyright © 2014 John Wiley & Sons, Ltd.

Transfection in the third dimension

An understanding of parameters that modulate gene transfer in 3-D will assist in the formation of gene delivery systems and scaffolds, which can mediate efficient non-viral delivery for guiding in vivo tissue regeneration and therapy. We have previously demonstrated the cell area and length, integrin expression, and RhoGTPase mediated signalling to be pivotal parameters that guide gene transfer to mouse mesenchymal stem cells (mMSCs) cultured in 2-D and are modulated by ECM proteins. In this study, we were interested in determining if cationic polymer mediated gene transfer to cells seeded in 3-D would occur through different mechanisms as compared to those seeded in 2-D. In particular, we examined the endocytosis pathways used to internalize polyplexes, and the role of cytoskeletal dynamics and RhoGTPases in non-viral gene transfer for cells seeded in 2-D and 3-D. Inhibition of clathrin- and caveolae-mediated endocytosis resulted in a more drastic decrease in overall transgene expression for cells seeded in 3-D than for those in 2-D. In addition, polyplex internalization was only significantly decreased in 3-D when clathrin-mediated endocytosis was inhibited, while caveolae-mediated endocytosis inhibition for cells seeded in 2-D resulted in the strongest polyplex internalization inhibition. Actin and microtubule polymerization affected 2-D and 3-D transfection differently. Microtubule depolymerization enhanced transgene expression in 2-D, but inhibited transgene expression in 3-D. Lastly, inhibition of RhoGTPases also affected 2-D and 3-D transfection differently. The inhibition of ROCK effectors resulted in a decrease of transgene expression and internalization for cells seeded in 3-D, but not in 2-D, and the inhibition of the effector PAK1 resulted in an increase of transgene expression for both 2-D and 3-D. Overall, our study suggests that the process of gene transfer occurs through different mechanisms for cells seeded in 2-D compared to those seeded in 3-D.

Design of cell-matrix interactions in hyaluronic acid hydrogel scaffolds

The design of hyaluronic acid (HA)-based hydrogel scaffolds to elicit highly controlled and tunable cell response and behavior is a major field of interest in developing tissue engineering and regenerative medicine applications. This review will begin with an overview of the biological context of HA, which is needed to better understand how to engineer cell-matrix interactions in the scaffolds via the incorporation of different types of signals in order to direct and control cell behavior. Specifically, recent methods of incorporating various bioactive, mechanical and spatial signals are reviewed, as well as novel HA modifications and crosslinking schemes with a focus on specificity.

Plasmid DNA hydrogels for biomedical applications

In the last few years, our research group has focused on the design and development of plasmid DNA (pDNA) based systems as devices to be used therapeutically in the biomedical field. Biocompatible macro and micro plasmid DNA gels were prepared by a cross-linking reaction. For the first time, the pDNA gels have been investigated with respect to their swelling in aqueous solution containing different additives. Furthermore, we clarified the fundamental and basic aspects of the solute release mechanism from pDNA hydrogels and the significance of this information is enormous as a basic tool for the formulation of pDNA carriers for drug/gene delivery applications. The co-delivery of a specific gene and anticancer drugs, combining chemical and gene therapies in the treatment of cancer was the main challenge of our research. Significant progresses have been made with a new p53 encoding pDNA microgel that is suitable for the loading and release of pDNA and doxorubicin. This represents a strong valuable finding in the strategic development of systems to improve cancer cure through the synergetic effect of chemical and gene therapy.

Tissue engineering for plastic surgeons: a primer

A central tenet of reconstructive surgery is the principle of "replacing like with like." However, due to limitations in the availability of autologous tissue or because of the complications that may ensue from harvesting it, autologous reconstruction may be impractical to perform or too costly in terms of patient donor-site morbidity. The field of tissue engineering has long held promise to alleviate these shortcomings. Scaffolds are the structural building blocks of tissue-engineered constructs, akin to the extracellular matrix within native tissues. Commonly used scaffolds include allogenic or xenogenic decellularized tissue, synthetic or naturally derived hydrogels, and synthetic biodegradable nonhydrogel polymeric scaffolds. Embryonic, induced pluripotent, and mesenchymal stem cells also hold immense potential for regenerative purposes. Chemical signals including growth factors and cytokines may be harnessed to augment wound healing and tissue regeneration. Tissue engineering is already clinically prevalent in the fields of breast augmentation and reconstruction, skin substitutes, wound healing, auricular reconstruction, and bone, cartilage, and nerve grafting. Future directions for tissue engineering in plastic surgery include the development of prevascularized constructs and rationally designed scaffolds, the use of stem cells to regenerate organs and tissues, and gene therapy.