Direct (Hetero)arylation Polymerization: An Effective Route to 3,4-Propylenedioxythiophene-Based Polymers with Low Residual Metal Content

Understanding Degradation Dynamics of Azomethine-containing Conjugated Polymers

Understanding the influence of chemical environments on the degradation properties of conjugated polymers is an important task for the continued development of sustainable materials with potential utility in biomedical and optoelectronic applications. Azomethine-containing polymers were synthesized via palladium-catalyzed direct arylation polymerization (DArP) and used to study fundamental degradation trends upon exposure to acid. Shifts in the UV-vis absorbance spectra and the appearance/disappearance of aldehyde and imine diagnostic peaks within the 1H NMR spectra indicate that the polymers will degrade in the presence of acid. After degradation, the aldehyde starting material was recovered in high yields and was shown to maintain structural integrity when compared with commercial starting materials. Solution-degradation studies found that rates of degradation vary from 5 h to 90 s depending on the choice of solvent or acid used for hydrolysis. Additionally, the polymer was shown to degrade in the presence of perfluoroalkyl substances (PFASs), which makes them potentially useful as PFAS-sensitive sensors. Ultimately, this research provides strategies to control the degradation kinetics of azomethine-containing polymers through the manipulation of environmental factors and guides the continued development of azomethine-based materials.

Role of Side-Chain Free Volume on the Electrochemical Behavior of Poly(propylenedioxythiophenes)

Mixed ionic/electronic conducting polymers are versatile systems for, e.g., energy storage, heat management (exploiting electrochromism), and biosensing, all of which require electrochemical doping, i.e., the electrochemical oxidation or reduction of their macromolecular backbones. Electrochemical doping is achieved via electro-injection of charges (i.e., electronic carriers), stabilized via migration of counterions from a supporting electrolyte. Since the choice of the polymer side-chain functionalization influences electrolyte and/or ion sorption and desorption, it in turn affects redox properties, and, thus, electrochemically induced mixed conduction. However, our understanding of how side-chain versus backbone design can increase ion flow while retaining high electronic transport remains limited. Hence, heuristic design approaches have typically been followed. Herein, we consider the redox and swelling behavior of three poly(propylenedioxythiophene) derivatives, P(ProDOT)s, substituted with different side-chain motifs, and demonstrate that passive swelling is controlled by the surface polarity of P(ProDOT) films. In contrast, active swelling under operando conditions (i.e., under an applied bias) is dictated by the local side-chain free volume on the length scale of a monomer unit. Such insights deliver important design criteria toward durable soft electrochemical systems for diverse energy and biosensing platforms and new understanding into electrochemical conditioning ("break-in") in many conducting polymers.

Dual Polymer Complementarity Induced Truly Black Electrochromic Film and the Construction of Intelligent Eye-Protection Filters

This work presents a new strategy to achieve a truly black electrochromic film and develop available intelligent eye-protection filters with "day mode" and "night mode", promising to minimize the harmful effects of light on eyes. The soluble red-to-transparent electrochromic polymer P1 was constructed using quinacridone as the basic unit and introduced dual-donor proDOT and DTC units with similar electron-donating capabilities. The beneficial broader absorption associated with the dual-donor in P1 results in ideal spectrum complementarity with P2 (cyan-to-transparent) in the visible region (380-780 nm). In addition to complementary colors, both polymers exhibit good compatibility with respect to electrochemical and electrochromic properties. Therefore, a P1/P2 film with a mass ratio of 1:1.5 for blending is preferred to obtain truly black color with fast switching time and good cyclic stability. Furthermore, an electrochromic device for intelligent eye-protection filters was designed and assembled with the P1/P2 film as the electrochromic layer and P3 featuring a yellow (antiblue ray)-to-dark gray color change as the ion storage layer. The assembled prototype electrochromic device demonstrated promising applications in intelligent day-night optical adjustment for eye-protection filters.

Metal-like Charge Transport in PEDOT(OH) Films by Post-processing Side Chain Removal from a Soluble Precursor Polymer

Herein, a route to produce highly electrically conductive doped hydroxymethyl functionalized poly(3,4-ethylenedioxythiophene) (PEDOT) films, termed PEDOT(OH) with metal-like charge transport properties using a fully solution processable precursor polymer is reported. This is achieved via an ester-functionalized PEDOT derivative [PEDOT(EHE)] that is soluble in a range of solvents with excellent film-forming ability. PEDOT(EHE) demonstrates moderate electrical conductivities of 20-60 S cm^-1 and hopping-like (i.e., thermally activated) transport when doped with ferric tosylate (FeTos₃ ). Upon basic hydrolysis of PEDOT(EHE) films, the electrically insulative side chains are cleaved and washed from the polymer film, leaving a densified film of PEDOT(OH). These films, when optimally doped, reach electrical conductivities of ≈1200 S cm^-1 and demonstrate metal-like (i.e., thermally deactivated and band-like) transport properties and high stability at comparable doping levels.

Molecular Design Strategies toward Improvement of Charge Injection and Ionic Conduction in Organic Mixed Ionic-Electronic Conductors for Organic Electrochemical Transistors

Expanding the toolbox of the biology and electronics mutual conjunction is a primary aim of bioelectronics. The organic electrochemical transistor (OECT) has undeniably become a predominant device for mixed conduction materials, offering impressive transconduction properties alongside a relatively simple device architecture. In this review, we focus on the discussion of recent material developments in the area of mixed conductors for bioelectronic applications by means of thorough structure-property investigation and analysis of current challenges. Fundamental operation principles of the OECT are revisited, and characterization methods are highlighted. Current bioelectronic applications of organic mixed ionic-electronic conductors (OMIECs) are underlined. Challenges in the performance and operational stability of OECT channel materials as well as potential strategies for mitigating them, are discussed. This is further expanded to sketch a synopsis of the history of mixed conduction materials for both p- and n-type channel operation, detailing the synthetic challenges and milestones which have been overcome to frequently produce higher performing OECT devices. The cumulative work of multiple research groups is summarized, and synthetic design strategies are extracted to present a series of design principles that can be utilized to drive figure-of-merit performance values even further for future OMIEC materials.

Printing dynamic color palettes and layered textures through modeling-guided stacking of electrochromic polymers

In printable electrochromic polymer (ECP) displays, a wide color gamut, precise patterning, and controllable color switching are important. However, it is a significant challenge to achieve such features synergistically. Here, we present a solution-processable ECP stacking scheme, where a crosslinker is co-processed with three primary ECPs (ECP-Cyan, ECP-Magenta, and ECP-Yellow), which endows the primary ECPs with solvent-resistant properties and allows them to be sequentially deposited. Via varying the film thickness of each ECP layer, a full-color palette can be constructed. The ECP stacking strategy is further integrated with photolithography. Delicate multilayer patterns with overhang and undercut textures can be generated, allowing information displays with spatial dimensionality. In addition, via modulating the stacking sequence, the electrochemical onset potentials of the ECP components can be synchronized to reduce unwanted intermediate colors that are often found in co-processed ECPs. Should specific color properties be desired, COMSOL modeling could be applied to guide the stacking. We believe that this ECP stacking strategy opens a new avenue for electrochromic printing and displays.

Organic Electrochemical Transistors for In Vivo Bioelectronics

Organic electrochemical transistors (OECTs) are presently a focus of intense research and hold great potential in expanding the horizons of the bioelectronics industry. The notable characteristics of OECTs, including their electrolyte-gating, which offers intimate interfacing with biological environments, and aqueous stability, make them particularly suitable to be operated within a living organism (in vivo). Unlike the existing in vivo bioelectronic devices, mostly based on rigid metal electrodes, OECTs form a soft mechanical contact with the biological milieu and ensure a high signal-to-noise ratio because of their powerful amplification capability. Such features make OECTs particularly desirable for a wide range of in vivo applications, including electrophysiological recordings, neuron stimulation, and neurotransmitter detection, and regulation of plant processes in vivo. In this review, a systematic compilation of the in vivo applications is presented that are addressed by the OECT technology. First, the operating mechanisms, and the device design and materials design principles of OECTs are examined, and then multiple examples are provided from the literature while identifying the unique device properties that enable the application progress. Finally, one critically looks at the future of the OECT technology for in vivo bioelectronic applications.

Bioinspired Dynamic Camouflage from Colloidal Nanocrystals Embedded Electrochromics

Camouflage is often seen in animals, and it presents in both passive and active forms. For instance, the wings of Closterocerus coffeellae exhibit distinct appearances against different backgrounds, while the chameleon actively changes its skin colors to morph into the environment. Herein, we report an artificial skin-like optoelectronic device that enables actively changing appearances and passively morphing into the environment by manipulating light-matter interactions with electrochromic polymers and photonic colloid nanocrystals. To construct the new electrochromic device, highly reflective, yet transmissive photonic nanocrystals are introduced into the gel electrolyte and sandwiched between the layers of electrochromic polymers and ion storage materials. Through voltage-controlled color switching of electrochromic polymers from colored state to bleached state, the degree of light absorbance, transmittance, and reflectance can be finely balanced and precisely modulated with the device. A broad synthesized color gamut and angle-dependent visual effects can be realized on this electronic skin-like device.

In Situ Measurement of Breathing Strain and Mechanical Degradation in Organic Electrochromic Polymers

Organic mixed ionic-electronic conductors (OMIECs) are an emerging family of materials crucial in the development of flexible, bio-, and optoelectronics. In electrochromic polymers, the cyclic redox reaction is associated with a mechanical breathing strain, which deforms the OMIECs and degrades the device reliability. We set forth an in situ nanoindentation approach to measure the breathing strain of a poly(3,4-propylenedioxythiophene) (PProDOT) thin film in a customized liquid cell during electrochromic cycles. A breathing volumetric strain of 12-25% is persistent in different sets of electrolytes of various solvents, salts, and salt molarities. The electrochemical conditioning, intermittence time, and cyclic protocol have minor effects on the mechanical response of PProDOT. The mechanical behavior and anion diffusivity measurement further infer the redox kinetics. Heavily cycled PProDOT films show reduced volumetric strain and accumulated mechanical damage of channel cracks and dysfunctional regions of slow and inhomogeneous electrochromic switching. This work is a systematic characterization of mechanical deformation and damage in a model OMIEC and informs the mechanical reliability of organic electrochromic devices.

Approaching the Integer-Charge Transfer Regime in Molecularly Doped Oligothiophenes by Efficient Decarboxylative Cross-Coupling

A library of symmetrical linear oligothiophene was prepared employing decarboxylative cross-coupling reaction as the key transformation. Thiophene potassium carboxylate salts were used as cross-coupling partners without the need of co-catalyst, base, or additives. This method demonstrates complete chemoselectivity and is a comprehensive greener approach compared to the existing methods. The modularity of this approach is demonstrated with the preparation of discreet oligothiophenes with up to 10 thiophene repeat units. Symmetrical oligothiophenes are prototypical organic semiconductors where their molecular electrical doping as a function of the chain length can be assessed spectroscopically. An oligothiophene critical length for integer charge transfer was observed to be 10 thiophene units, highlighting the potential use of discrete oligothiophenes as doped conduction or injection layers in organic electronics applications.

Mechanical breathing in organic electrochromics

The repetitive size change of the electrode over cycles, termed as mechanical breathing, is a crucial issue limiting the quality and lifetime of organic electrochromic devices. The mechanical deformation originates from the electron transport and ion intercalation in the redox active material. The dynamics of the state of charge induces drastic changes of the microstructure and properties of the host, and ultimately leads to structural disintegration at the interfaces. We quantify the breathing strain and the evolution of the mechanical properties of poly(3,4-propylenedioxythiophene) thin films in-situ using customized environmental nanoindentation. Upon oxidation, the film expands nearly 30% in volume, and the elastic modulus and hardness decrease by a factor of two. We perform theoretical modeling to understand thin film delamination from an indium tin oxide (ITO) current collector under cyclic load. We show that toughening the interface with roughened or silica-nanoparticle coated ITO surface significantly improves the cyclic performance.

Synthesis of a soluble adenine-functionalized polythiophene through direct arylation polymerization and its fluorescence responsive behavior

An adenine-functionalized polythiophene is synthesized via direct arylation polymerization using Boc-protection to overcome catalyst deactivation. The resulting copolymer is highly soluble and shows reversible fluorescence quenching.

Facile polymerization method for poly(3,4-ethylenedioxythiophene) and related polymers using iodine vapour

A simple polymerization at room temperature using iodine vapour for preparation of PEDOT and PProDOT and their soluble derivatives in neat form.

Conjugated electrochromic polymers with amide-containing side chains enabling aqueous electrolyte compatibility

This work illustrates an effective side-chain modification approach using amide functional groups to induce aqueous electroactivity to ProDOT-based electrochromic polymers.

Exploring the Utility of Buchwald Ligands for C-H Oxidative Direct Arylation Polymerizations

Oxidative C-H/C-H cross-coupling polymerizations provide an opportunity to synthesize conjugated polymers with an increased ease of monomer preparation, reduced environmental impact, and increased sustainability. Considering these attributes, it is necessary to expand the diversity of monomers that readily and efficiently participate in this coupling strategy to enable the development of conjugated polymers with a wide range of properties. Herein, the oxidative direct arylation polymerization toolbox is expanded to include 3,4-propylenedioxythiophene being synthesized via C-H/C-H cross-coupling methodologies. In conjunction with these efforts, the utilization of Buchwald ligands in C-H/C-H cross coupling polymerizations also is reported, and variations in the ligand structure provide insight into the role ligand choice has on C-H cross-coupling polymerizations. Specifically, it is determined that the phosphine functionality affects the rate-determining, concerted metalation-deprotonation step of the catalytic cycle, while bulky isopropyl substituents on the ligand's lower aryl ring promote reductive elimination. By balancing these steric effects on the ancillary ligands, polymers are synthesized to exhibit molecular weights above the effective conjugation length, with recovered yields >90%. In addition to expanding the scope of conjugated polymers accessible via oxidative direct arylation polymerization, these results provide the foundational understanding for utilizing Buchwald-type ligands in C-H-activated polymerizations.

One-Step Construction of Fluorenone-Based Donor-Acceptor-Type Conjugated Polymers via Direct Arylation Polymerization for Cell-Imaging Applications

Direct arylation polymerization (DARP) is a novel approach to obtain conjugated polymers (CPs) through the straightforward C-H activation of monomer building blocks. In this work, a convenient DARP method with high efficiency and excellent regioselectivity is developed to synthesize a series of donor-acceptor (D-A)-type CPs composed of electron-acceptor moiety fluorenones (FOs) and various electron-donor moieties. CPs with different band gaps are obtained in good yields and display large Stokes shifts up to 295 nm. Two ionic CPs, PFOP-NEt3(+) and PFOP-COO(-), were prepared in a polar solvent system to improve the water solubility and biocompatibility using the proposed DARP method. Detailed photophysical studies of these two CPs suggest that both solvation and hydrogen bonds play important roles in determining the polymers' spectroscopic properties. Further studies of the cationic polymer PFOP-NEt3(+) in cell imaging demonstrate its potential application in labeling cell membranes and lysosomes given its low cytotoxicity, excellent photostability, and specific subcellular localization.

Aqueous Electrolyte Compatible Electrochromic Polymers Processed from an Environmentally Sustainable Solvent

Developing aqueous electrolyte compatible, redox-active polymers that can be processed from environmentally sustainable solvents is desirable because these traits will effectively reduce environmental impact and human health hazards during processing procedures and in the final device architecture. To achieve organic solvent solubility and aqueous compatibility, a poly(3,4-propylenedioxythiophene) containing four ester functionalities was synthesized via direct arylation polymerization. The resulting polymer was spray-cast into a thin film from the environmentally sustainable solvent 2-methyltetrahydrofuran, and the presence of multiple polar functionalities rendered the film aqueous electrolyte compatible. The multiester-functionalized polymer exhibits a relatively low onset of oxidation (∼0.4 V vs Ag/AgCl) and electrochromic character by transitioning from a colored neutral state to a colorless oxidized state with increasing potential in 0.1 M NaCl aqueous electrolyte. Additionally, the ester-functionalized polymer exhibits similar electrochromic properties in aqueous electrolytes when compared to traditional alkyl-substituted poly(3,4-propylenedioxythiophenes) in organic electrolytes, as evidenced by contrast values of ∼70% and switching speeds of ∼2 s. This work highlights the use of multipolar functionalities as a design strategy for synthesizing organic solvent processable, aqueous electrolyte compatible redox-active polymers without postpolymerization modifications or the sacrifice of electrochromic properties.

All Polymer Solution Processed Electrochromic Devices: A Future without Indium Tin Oxide?

The growing range of applications for optoelectronic and electrochromic devices (ECDs) encourages the search for materials combining high electrical conductivity with optical transparency. Next generation transparent conducting electrodes (TCEs) are required to be inexpensive, lightweight, scalable, and compatible with flexible substrates to trigger innovations towards supporting sustainable living and reducing energy consumption. Here we show that PEDOT:PSS can be solution processed using blade coating and subsequently post-treated with nitric and acetic acid to raise its conductivity above 2000 S cm^-1 with a film transparency of ∼95%. A combined grazing-incidence wide angle X-ray scattering, atomic force microscopy, and thickness analysis of the film indicates that the removal of excess insulating PSS^- inducing reordering is the critical parameter for the claimed conductivity increase. We then investigate the impact of replacing indium tin oxide electrodes with PEDOT:PSS in ECDs. While electrochromic contrast and optical memory are comparable for devices constructed with both electrode materials, differences in switching kinetics are explored by comparing internal resistances, ion diffusion, and charging effects in the polymer films extracted by electrochemical impedance spectroscopy. While all these ideas are described based on a battery-type ECD configuration, these concepts are easily transferable to other types of redox-active devices.

Transparent Wood Smart Windows: Polymer Electrochromic Devices Based on Poly(3,4-Ethylenedioxythiophene):Poly(Styrene Sulfonate) Electrodes

Transparent wood composites, with their high strength and toughness, thermal insulation, and excellent transmissivity, offer a route to replace glass for diffusely transmitting windows. Here, conjugated-polymer-based electrochromic devices (ECDs) that switch on-demand are demonstrated using transparent wood coated with poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) as a transparent conducting electrode. These ECDs exhibit a vibrant magenta-to-clear color change that results from a remarkably colorless bleached state. Furthermore, they require low energy and power inputs of 3 mWh m-2 at 2 W m-2 to switch due to a high coloration efficiency (590 cm2  C-1 ) and low driving voltage (0.8 V). Each device component is processed with high-throughput methods, which highlights the opportunity to apply this approach to fabricate mechanically robust, energy-efficient smart windows on a large scale.

Novel Conjugated Polymers Prepared by Direct (Hetero) arylation: An Eco-Friendly Tool for Organic Electronics

The phthalimide (PhI) moiety has been attracting more attention as an excellent acceptor building block in donor-acceptor (D-A) conjugated polymers. In this paper; three D-A conjugated polymers with or without thiocarbonyl moieties are successfully prepared by the direct (hetero)-arylation polymerization (DHAP), which is an atom efficient and facile synthetic strategy to obtain polymer materials. Compared with the traditional carbon-carbon coupling reactions, this method possesses more advantages, including: fewer synthetic steps, avoidance of the preparation of the organometallic reagents, higher atom economy and fewer toxic byproducts, better compatibility with chemically sensitive functional groups and so on. All three of these designed PhI-based polymers exhibited favourable optoelectronic and thermal performance. The optical, thermodynamic and electrochemical properties of the synthesized polymers were systematically investigated using ultraviolet-visible (UV-vis) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and cyclic voltammetry (CV). The results of these three polymers indicated that thionation of the carbonyl was a highly effective methods to improve the properties of PhI-based polymers; and provided impetus for the development of thionated PhI derivatives for organic electronic applications.

One-pot synthesis of D–π–D–π–D type hole-transporting materials for perovskite solar cells by sequential C–H (hetero)arylations

D–π–D–π–D oligoaryls are facilely synthesized through consecutive C–H arylations, exhibiting up to 15.4% PCE when fabricated in perovskite solar cells as hole transporters.

Tunable green electrochromic polymers via direct arylation polymerization

A method to tune the hues of neutral green conjugated electrochromic polymers (NG-ECP) via direct C–H arylation polymerization (DArP) was developed.

Conjugated Polymers Via Direct Arylation Polymerization in Continuous Flow: Minimizing the Cost and Batch-to-Batch Variations for High-Throughput Energy Conversion

Continuous flow methods are utilized in conjunction with direct arylation polymerization (DArP) for the scaled synthesis of the roll-to-roll compatible polymer, poly[(2,5-bis(2-hexyldecyloxy)phenylene)-alt-(4,7-di(thiophen-2-yl)-benzo[c][1,2,5]thiadiazole)] (PPDTBT). PPDTBT is based on simple, inexpensive, and scalable monomers using thienyl-flanked benzothiadiazole as the acceptor, which is the first β-unprotected substrate to be used in continuous flow via DArP, enabling critical evaluation of the suitability of this emerging synthetic method for minimizing defects and for the scaled synthesis of high-performance materials. To demonstrate the usefulness of the method, DArP-prepared PPDTBT via continuous flow synthesis is employed for the preparation of indium tin oxide (ITO)-free and flexible roll-coated solar cells to achieve a power conversion efficiency of 3.5% for 1 cm² devices, which is comparable to the performance of PPDTBT polymerized through Stille cross coupling. These efforts demonstrate the distinct advantages of the continuous flow protocol with DArP avoiding use of toxic tin chemicals, reducing the associated costs of polymer upscaling, and minimizing batch-to-batch variations for high-quality material.

To branch or not to branch: C–H selectivity of thiophene-based donor–acceptor–donor monomers in direct arylation polycondensation exemplified by PCDTBT

The possibility for unselective C–H activation of a thiophene-based, donor–acceptor–donor monomer during direct arylation polycondensation is investigated.

Direct arylation polymerization of asymmetric push–pull aryl halides

Recently, direct arylation polymerization (DArP) has emerged as a greener polymerization method for donor–acceptor (D–A) type conjugated polymers.

Tin-Free Direct C-H Arylation Polymerization for High Photovoltaic Efficiency Conjugated Copolymers

A new and highly regioselective direct C-H arylation polymerization (DARP) methodology enables the reproducible and sustainable synthesis of high-performance π-conjugated photovoltaic copolymers. Unlike traditional Stille polycondensation methods for producing photovoltaic copolymers, this DARP protocol eliminates the need for environmentally harmful, toxic organotin compounds. This DARP protocol employs low loadings of commercially available catalyst components, Pd₂(dba)₃·CHCl₃ (0.5 mol%) and P(2-MeOPh)₃ (2 mol%), sterically tuned carboxylic acid additives, and an environmentally friendly solvent, 2-methyltetrahydrofuran. Using this DARP protocol, several representative copolymers are synthesized in excellent yields and high molecular masses. The DARP-derived copolymers are benchmarked versus Stille-derived counterparts by close comparison of optical, NMR spectroscopic, and electrochemical properties, all of which indicate great chemical similarity and no significant detectable structural defects in the DARP copolymers. The DARP- and Stille-derived copolymer and fullerene blend microstructural properties and morphologies are characterized with AFM, TEM, and XRD and are found to be virtually indistinguishable. Likewise, the charge generation, recombination, and transport characteristics of the fullerene blend films are found to be identical. For the first time, polymer solar cells fabricated using DARP-derived copolymers exhibit solar cell performances rivalling or exceeding those achieved with Stille-derived materials. For the DARP copolymer PBDTT-FTTE, the power conversion efficiency of 8.4% is a record for a DARP copolymer.

Band gap modulation in polythiophene and polypyrrole-based systems

In this paper, the structural and electronic properties of polythiophene and polyprrrole-based systems have been investigated using first-principles calculations both in periodic and oligomer forms. Of particular interest is the band gap modulation through substitutions and bilayer formation. Specifically, S has been substituted by Se and Te in polythiophene, leading to polyseleophene and polytellurophene, respectively, and N has been substituted by P and As in polypyrrole. The values obtained of the binding energy suggest that all the systems studied can be realized experimentally. Stacking (bilayer formation) of pure polythiophene, polypyrrole and their derivatives leads to linear suppression of the band gap or HOMO-LUMO gap as a function of the stacking. Mixed bilayers, including one formed from polythiophene on top of polypyrrole, have also been considered. Overall, a wide range of band gaps can be achieved through substitutions and stacking. Hybrid (B3LYP) calculations also suggest the same trend in the band gap as PBE calculations. Trends in the binding energy are similar for both periodic and molecular calculations. In addition, Γ-point phonon calculations were performed in order to check the stability of selected systems.

Syntheses via a direct arylation method of push-pull molecules based on triphenylamine and 3-cyano-4-hexyloxythiophene moieties

Synthetic access to new push-pull molecules based on 3-cyano-4-hexyloxythiophene and triphenylamine moieties is presented herein using a clean methodology. The key step involves a direct heteroarylation coupling reaction in the presence of a homogeneous or heterogeneous [Pd] catalyst followed by Knoevenagel condensation performed in ethanol as a solvent. Structure-electronic property relationships of the new molecular materials are discussed and then their use as donors in bilayer planar heterojunction solar cells is investigated.