Hierarchical magnetite/silica nanoassemblies as magnetically recoverable catalyst-supports

Catalytic performance and antibacterial behaviour with molecular docking analysis of silver and polyacrylic acid doped graphene quantum dots

In this research, a fixed concentration (3 wt%) of Ag/PAA and PAA/Ag doped graphene quantum dots (GQDs) were synthesized using the co-precipitation technique. A variety of characterization techniques were employed to synthesize samples to investigate their optical, morphological, structural, and compositional analyses, antimicrobial efficacy, and dye degradation potential with molecular docking analysis. GQDs have high solubility, narrow band gaps, and are suitable for electron acceptors and donors but show less adsorption and catalytic behavior. Incorporating polyacrylic acid (PAA) into GQDs increases the catalytic and antibacterial activities due to the carboxylic group (-COOH). Furthermore, introducing silver (Ag) increased the degradation of dye and microbes as it had a high surface-to-volume ratio. In addition, molecular docking studies were used to decipher the mechanism underlying the bactericidal action of silver and polyacrylic acid-doped graphene quantum dots and revealed inhibition of β-lactamase and DNA gyrase.

Hierarchical Colloidal Self-Assembly on Lattice-Mismatched Moiré Patterns

Extending atomic epitaxy concepts to colloidal systems for realizing functional surface structures has recently piqued scientific interest. Akin to the growth of ordered metal clusters on graphene moiré, spatially ordered colloidal crystals have been realized on soft lithographically fabricated moiré patterns. In addition to moiré periodicity, lattice misfit strain can bring about a further level of hierarchy in colloidal self-assembly, although its role in self-organization remains unexplored. Here, we demonstrate the self-organized growth of micrometer-sized colloidal pyramid arrays with lateral order extending over millimeter length scales on lattice-mismatched moiré patterns. By probing the film growth dynamics with single-particle resolution, we uncovered the interplay between lattice misfit strain and topographically varying surface potential within the moiré unit cell, which significantly alters the nucleation process. We also show that the structural organization of colloids within moiré regions primarily depends on the moiré angle, and by tuning it, multiple levels of hierarchy can be achieved.

Robust, reliable and quantitative sensing of aqueous arsenic species by Surface-enhanced Raman Spectroscopy: The crucial role of surface silver ions for good analytical practice

Arsenic speciation analysis is important for pollution and health risk assessment. Surface-enhanced Raman Spectroscopy (SERS) is supposed to be a promising detection technology for arsenic species owing to the unique fingerprints. However, further application of SERS is hampered by its poor repeatability. Herein, the role of surface silver ions on colloidal Ag was revealed in SERS analysis of arsenic species. Arsenic species were adsorbed on Ag nanoparticles (Ag NPs) driven by surface silver ions and were simultaneously sensed by the SERS "hot spots" generated from the aggregation of Ag NPs. So, the inconsistent SERS activities of Ag NPs synthesized from different batches can be significantly improved by modifying external silver ions onto Ag NPs (AgNPs@Ag⁺), Specific binding affinity of surface silver ions to arsenic species generated higher sensitivity (detection limit, 4.0 × 10^-11 mol L^-1 for arsenite, 8.0 × 10^-11 mol L^-1 for arsenate), wider linear range, faster response, cleaner spectra background and better reproducibility. Batch-to-batch reproducibility was significantly improved with a variation below 3.1%. The method was also demonstrated with drinking and environmental water with adequate recovery and high interference resistance. Our findings displayed good analytical practice of the surface silver ions derived SERS method and its great potential in the rapid detection of hazardous materials.

Evaluation of bactericidal potential and catalytic dye degradation of multiple morphology based chitosan/polyvinylpyrrolidone-doped bismuth oxide nanostructures

In this study, 0.02 and 0.04 wt% of chitosan (CS) were successfully incorporated in a fixed amount of polyvinylpyrrolidone (PVP)-doped Bi₂O₃ nanostructures (NSs) via a co-precipitation approach. The purpose of this research was to degrade hazardous methylene blue dye and assess antimicrobial potential of the prepared CS/PVP-doped Bi₂O₃ nanostructures. In addition, optical characteristics, charge recombination rate, elemental composition, phase formation, surface morphology, functional groups, d-spacing, and crystallinity of the obtained nanostructures were investigated. CS/PVP-doped Bi₂O₃ nanostructures exhibited efficient catalytic activity (measured as 99%) in a neutral medium for dopant-free nanostructures while the inhibition zone was measured using a Vernier caliper against pathogens Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) at low and high doses to check antimicrobial activity. Strong bactericidal action was recorded against S. aureus bacteria such that a significant inhibition zone was measured at 3.09 mm.

A Facile Route for the Preparation of Monodisperse Iron nitride at Silica Core/shell Nanostructures

Uniform-sized iron oxide nanoparticles obtained from the solution phase thermal decomposition of the iron-oleate complex were encapsulated inside the silica shell by the reverse microemulsion technique, and then thermal treatment under NH₃ to transfer the iron oxide to iron nitride. The transmission electron microscopy images distinctly demonstrated that the as-prepared iron nitride at silica core/shell nanostructures were highly uniform in particle-size distribution. By using iron oxide nanoparticles of 6.1, 10.3, 16.2, and 21.8 nm as starting materials, iron nitride nanoparticles with average diameters of 5.6, 9.3, 11.6, and 16.7 nm were produced, respectively. The acid-resistant properties of the iron nitride at silica core/shell nanostructures were found to be much higher than the starting iron oxide at silica. A superconducting quantum interference device was used for the magnetic characterization of the nanostructure. Besides, magnetic resonance imaging (MRI) studies using iron nitride at silica nanocomposites as contrast agents demonstrated T ₂ enhanced effects that were dependent on the concentration. These core/shell nanostructures have enormous potential in magnetic nanodevice and biomedical applications. The current process is expected to be easy for large-scale and transfer other metal oxide nanoparticles.

Iron-Palladium magnetic nanoparticles for decolorizing rhodamine B and scavenging reactive oxygen species

HYPOTHESIS

Here, FePd magnetic nanoparticles (MNPs) are developed as artificial enzymes with high biocompatibility and reusability.

EXPERIMENT

The nanoparticles (NPs) are synthesized in an aqueous solvent by one-pot synthesis utilizing glutathione (GSH) and cysteine (Cys) as surfactants.

FINDINGS

The prepared hydrophilic FePd NPs are redispersible in water. Further, they exhibit catalytic activity for the degradation of rhodamine B (RhB), as well as for the inhibition of reactive oxygen species (ROS) production induced by H₂O₂, which are two- and seven-fold enhancements of their catalytic performances, respectively, compared with that of horseradish peroxidase. The computational simulation and electrochemical analysis indicate that the enhancement of the catalytic effect is due to the protection of the MNP surface by GSH and Cys. In vitro experiments reveal that FePd MNPs behave like a peroxidase and decrease the ROS in mammalian cells. The cytotoxicity assessment of FePd MNPs via exposures to different cell lines for over seven days indicates that they can maintain the cell viability of >90% for up to 20 μgmL^-1 concentration. FePd MNPs with high saturation magnetization and biocompatibility can be utilized as recyclable peroxidase-mimicking nanozymes and biosensors in a variety of catalytic and biological applications.

Synthesis and Characterization of ZnO-SiO2 Composite Using Oil Palm Empty Fruit Bunch as a Potential Silica Source

In this paper, the structural and optical properties of ZnO-SiO₂-based ceramics fabricated from oil palm empty fruit bunch (OPEFB) were investigated. The OPEFB waste was burned at 600, 700 and 800 °C to form palm ash and was then treated with sulfuric acid to extract silica from the ash. X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyses confirmed the existence of SiO₂ in the sample. Field emission scanning electron microscopy (FESEM) showed that the particles displayed an irregular shape and became finer after leaching. Then, the solid-state method was used to produce the ZnO-SiO₂ composite and the samples were sintered at 600, 800, 1000, 1200 and 1400 °C. The XRD peaks of the Zn₂SiO₄ showed high intensity, which indicated high crystallinity of the composite. FESEM images proved that the grain boundaries were larger as the temperature increased. Upon obtaining the absorbance spectrum from ultraviolet-visible (UV-Vis) spectroscopy, the energy band gaps obtained were 3.192, 3.202 and 3.214 eV at room temperature, 600 and 800 °C, respectively, and decreased to 3.127, 2.854 and 2.609 eV at 1000, 1200 and 1400 °C, respectively. OPEFB shows high potential as a silica source in producing promising optical materials.

Multi-Component Mesocrystalline Nanoparticles with Enhanced Photocatalytic Activity

Mesocrystals, consisting of small subunits, have gained research interests owing to their ability to simultaneously modify material-specific properties and interactions among subunits. However, despite these unique characteristics, most mesocrystals are composed of a single material, and there is a disjunction between academic discovery and practical application. In this study, the synthesis of multi-component mesocrystalline nanoparticles composed of Fe₃ O₄ , ZnFe₂ O₄ , and ZnO subunits using a polymerization induced heterogeneous nucleation method is reported. The structure has small ZnFe₂ O₄ and ZnO nanocrystals covering the Fe₃ O₄ crystallites. It exhibits not only magnetic and catalytic properties determined by the size of each subunit nanocrystal, but also enhances photocatalytic and colloidal properties that originates because of its crowded arrangement. The magnetically recoverable catalysts exhibit remarkable photodegradation of organic molecules under the irradiation of visible light for 1 h; thus, improving its applicability in purifying a large amount of wastewater during the daytime.

Selective oxidation of alcohols and sulfides via O2 using a Co(ii) salen complex catalyst immobilized on KCC-1: synthesis and kinetic study

The aim of this study was to immobilize a Co(ii) salen complex on KCC-1 as a catalyst that can be recovered (Co(ii) salen complex@KCC-1). Field-emission transmission electron microscopy, FT-IR spectroscopy, thermogravimetric analysis, elemental analysis, atomic absorption spectroscopy, and XRD were used to confirm the structure and chemical nature of Co(ii) salen complex@KCC-1. The oxidation efficiency was obtained for an extensive range of sulfides and alcohols using this sustainable catalyst, alongside O₂ as an oxygen source and isobutyraldehyde (IBA) as an oxygen acceptor, with superior selectivity and conversion for the relevant oxidation products (sulfoxides and ketones or aldehydes) under moderate conditions. The μ-oxo and peroxo groups on the ligands of the Co complex appeared to be responsible for the superior activity of the catalyst. Essential factors behind the oxidation of alcohol and sulfoxides were investigated, including the catalyst, solvent, and temperature. In this paper, molecular oxygen (O₂) was used as a green oxidant. Furthermore, kinetic studies were conducted, revealing a first-order reaction for the oxidation of both benzyl alcohol and sulfide. The reaction progressed at mild temperature, and the catalyst could be easily recovered and reused for numerous consecutive runs under the reaction conditions, without any substantial reduction in the functionality of the catalytic system.

Synthesis of Podlike Magnetic Mesoporous Silica Nanochains for Use as Enzyme Support and Nanostirrer in Biocatalysis

Magnetic mesoporous materials have attracted great interest due to their combined property of magnetic nanomaterials and mesoporous materials as well as their potential applications in catalysis, bioenrichment, drug delivery, nanoreactors, etc. In this study, one-dimensional (1D) podlike magnetic mesoporous silica nanochains with tunable hollow space (Fe₃O₄@nSiO₂@void@mSiO₂ nanochain named as podlike 1D magnetic mesoporous silica (PL-MMS) nanochain) are rationally synthesized for the first time through a controlled magnetic-induced interface coassembly approach. The obtained PL-MMS possesses a tunable diameter (300-500 nm), large and perpendicular mesopores (8.2 nm) in the outer shell, a silica-protected magnetic-responsive core, and a high surface area (325 m²/g). Benefiting from the large voids and unique mesopores, these mesoporous nanochains exhibit superior performance in enzyme (lipase with a size of 4.0 nm) immobilization with a high loading capacity of 223 μg/mg, and the immobilized lipase demonstrates enhanced catalytic activity in different pH values and temperatures as well as excellent tolerance of organic solvent.

In situ redox-oxidation polymerization for magnetic core-shell nanostructure with polydopamine-encapsulated-Au hybrid shell

This work reports a facile one-step method for the fabricating Fe₃O₄@Au/polydopamine sandwich-like core-shell nanostructure, in which the Au/polydopamine (Au/PDA) hybrid shell is obtained via an in situ redox-oxidation polymerization between the HAuCl₄ and dopamine. The content of Au nanocrystals, shell thickness, and particle sizes are tunable by varying the experimental parameters. Intriguingly, this general method can be applied for different functional nanostructures such as the β-FeOOH@Au/PDA, SiO₂@Au/PDA, and CNT@Au/PDA nanocomposites. A possible formation mechanism is proposed and it is found that the surface interaction plays a key role in determining the final nanostructure. The as-prepared Fe₃O₄@Au/PDA exhibited eminent catalytic activity on the reduction of 4-nitrophenol. Since the external PDA shell prevents the Au nanocrystals from leaching during the reduction, the cycling activity has been maintained as high as 95% after seven times of catalytic reaction.

Synthetic strategies and application of gold-based nanocatalysts for nitroaromatics reduction

With the increasing requirement of efficient organic transformations on the basic concept of Green Sustainable Chemistry, the development of highly efficient catalytic reaction system is greatly desired. In this case, gold (Au)-based nanocatalysts are promising candidates for catalytic reaction, especially for the reduction of nitroaromatics. They have attracted wide attention and well developed in the application of nitroaromatics reduction because of the unique properties compared with that of other conventional metal-based catalysts. With this respect, this review proposes recent trends in the application of Au nanocatalysts for efficient reduction process of nitroaromatics. Some typical approaches are compared and discussed to guide the synthesis of highly efficient Au nanocatalysts. The mechanism on the use of H₂ and NaBH₄ solution as the source of hydrogen is compared, and that proposed under light irradiation is discussed. The high and unique catalytic activity of some carriers, such as oxides and carbons-based materials, based on different sizes, structures, and shapes of supported Au nanocatalysts for nitroaromatics reduction are described. The catalytic performance of Au combining with other metal nanoparticles by alloy or doping, like multi-metal nanoparticles system, is further discussed. Finally, a short discussion is introduced to compare the catalysis with other metallic nanocatalysts.

Deposition of engineered nanoparticles (ENPs) on surfaces in aquatic systems: a review of interaction forces, experimental approaches, and influencing factors

The growing development of nanotechnology has promoted the wide application of engineered nanomaterials, raising immense concern over the toxicological impacts of nanoparticles on the ecological environment during their transport processes. Nanoparticles in aquatic systems may undergo deposition onto environmental surfaces, which affects the corresponding interactions of engineered nanoparticles (ENPs) with other contaminants and their environmental fate to a certain extent. In this review, the most common ENPs, i.e., carbonaceous, metallic, and nonmetallic nanoparticles, and their potential ecotoxicological impacts on the environment are summarized. Colloidal interactions, including Derjaguin-Landau-Verwey-Overbeek (DLVO) and non-DLVO forces, involved in governing the depositional behavior of these nanoparticles in aquatic systems are outlined in this work. Moreover, laboratory approaches for examining the deposition of ENPs on collector surfaces, such as the packed-bed column and quartz crystal microbalance (QCM) method, and the limitations of their applications are outlined. In addition, the deposition kinetics of nanoparticles on different types of surfaces are critically discussed as well, with emphasis on other influencing factors, including particle-specific properties, particle aggregation, ionic strength, pH, and natural organic matter. Finally, the future outlook and challenges of estimating the environmental transport of ENPs are presented. This review will be helpful for better understanding the effects and transport fate of ENPs in aquatic systems. Graphical abstract ᅟ.

Colloidal Assembly Approaches to Micro/Nanostructures of Complex Morphologies

The ability to programmatically assemble colloidal micro/nanostructures into highly ordered superstructures is of great importance in both fundamental studies and practical applications. In addition to the sophisticated manipulation of the short-range and long-range interactions imposed on the colloidal building blocks, the intrinsic shape elements including face, edge, corner, concave, convex, and curvature also play very important roles in solving the "jigsaw puzzle" of the superstructures. Here, the recent progress in the development of colloidal assembly strategies for the formation of complex superstructures is reviewed, with a primary focus on the unique effects of the morphology of the building blocks to the assembly processes and the final structures. Overall, this Review aims to shed light on the fundamental understanding of the colloidal behaviors of complex micro/nanostructures and promote the continued development of effective strategies for the creation of functional materials with complex compositions and morphologies.

A magnetic hydrazine-functionalized dendrimer embedded with TiO2 as a novel affinity probe for the selective enrichment of low-abundance phosphopeptides from biological samples

Dendrimers exhibit tunable terminal functionality and bio-friendly nature, making them of being promising materials for applications in the field of separation and enrichment. In this work, we prepared magnetic hydrazide-functionalized poly-amidoamine (PAMAM) dendrimer embedded with TiO₂ for the enrichment of phosphopeptides. The novel affinity probe possessed superparamagnetism, realizing its rapid separation from sample solution. Electrostatic attraction and hydrogen bonding existed between PAMAM and phosphopeptides while Lewis acid-base interaction was originated between TiO₂ and the targets. The combined synergistic strength of multiple binding interactions contributed to the highly selective enrichment of phosphopeptides. The specificity for the capture of phosphopeptides was reflected in quantities as low as 1:1000 mass ratio of phosphopeptides to non-phosphopeptides. The detection limit of β-casein digests was low to 0.4 fmol, indicating the high sensitivity of the developed method. Fifteen and four phosphopeptides could be selectively captured from non-fat milk digests and human serum samples, which further confirmed the great potential of the affinity probe in the extraction of low-abundance phosphopeptides from real complex biological samples.

Hierarchical Porous Magnesium Oxide (Hr-MgO) Microspheres for Adsorption of an Organophosphate Pesticide: Kinetics, Isotherm, Thermodynamics, and DFT Studies

In this study, hierarchical porous magnesium oxide (Hr-MgO) microspheres have been fabricated from a hydromagnesite precursor via a facile precipitation method followed by calcination. The Hr-MgO microspheres consist of several nanosheet building blocks that generate a flowerlike architecture. Chlorpyrifos (CPF), a persistent organic pollutant, has been chosen as a model organophosphate pesticide to determine the adsorptive capacities of the fabricated Hr-MgO. The equilibrium adsorption data fits well with the Langmuir isotherm model, showing a maximum adsorption capacity of 3974 mg g^-1, which is the highest value to date. Both kinetic as well as thermodynamic parameters reveal the spontaneous, exothermic, and pseudo-second-order nature of the adsorption process due to chemisorption between the pesticide and the adsorbent. Density functional theory studies suggest the importance of hydroxylation on the MgO surface for the successful destructive adsorption, which takes place via the cleavage of S═P and Cl-C bonds resulting in the fragmentation of CPF, which is in good agreement with Fourier transform infrared and mass spectrometric studies. The present study shows the potential use of hierarchically structured porous MgO microspheres as an efficient adsorbent for the removal of CPF pollutant.

Synthesis of belite cement from nano-silica extracted from two rice husk ashes

Nano-silicas extracted from a pure rice husk ash calcined in the laboratory (RHA) and ash from an impure industrial rice husk waste (BRHA), were used to form belite cement by firing with two different calcium sources (calcium carbonate and calcium nitrate). The nano-silica extracted from RHA was highly reactive due to its high pore volume and low activation energy of dehydration. The formation of belite cement from both nano-silicas was studied by firing with two different calcium sources, Ca(NO₃)₂ and CaCO₃ at 800-1100 °C. Both nano-silicas formed the principal phase in belite cement (larnite or β-C₂S) at temperatures as low as 800 °C, especially with calcium nitrate as the calcium source. Thus, highly impure BRHA is shown to be very suitable as a starting material for the low-temperature production of belite cement, especially in conjunction with calcium nitrate as the calcium source.

Thermo-responsive self-immolative nanoassemblies: direct and indirect triggering

A new thermo-responsive end-cap was developed and applied to self-immolative vesicles and micelles with both direct and indirect thermal triggering.

Gram-scale synthesis of superparamagnetic Fe3O4 nanocrystal clusters with long-term charge stability for highly stable magnetically responsive photonic crystals

We report the gram-scale hydrothermal synthesis of superparamagnetic Fe₃O₄ CNCs with superior long-term charge stability, which are suitable building blocks for magnetically responsive photonic crystals (MRPCs) with widely, rapidly and reversibly tunable diffractions across the visible and near IR range, as well as long-term stability of photonic performances. The scalable synthesis of Fe₃O₄ CNCs with excellent long-term colloidal stability will facilitate their wide application in photonics, biomedicine, catalysis and other areas.

Preparation of a Fe3O4-Au-GO nanocomposite for simultaneous treatment of oil/water separation and dye decomposition

A nanocomposite capable of simultaneously controlling multiple water pollutants (soluble organic dye and insoluble chemical solvent) has been obtained. The Au and Fe₃O₄ nanoparticles (NPs) were modified on a graphene oxide (GO) surface via light reduction and covalent attachment. The obtained Fe₃O₄-Au-GO nanocomposite has magnetic driving ability and catalytic applications. The nanocomposite can form emulsions after wrapping an insoluble and volatile organic solvent inside; moreover, the multi-layer graphene shell structure may delay volatilization of the solvent, ensuring that the oil droplets are collected efficiently and completely by the Fe₃O₄-Au-GO nanocomposite. At the same time, the Au NPs on the surface of the composite can effectively catalyze the decomposition of an organic dye in water and the recovery of the nanocomposite catalyst can also be realized using an external magnetic field. The simultaneous treatment of non-soluble oil (organic solvents) and organic dyes in water can be realized by the Fe₃O₄-Au-GO nanocomposite. Therefore, based on surface modification of GO, one material with two types of water pollution treatment functions was realized. This provides a new way for the simultaneous treatment of oil separation and dye decomposition, and the assembled structure may result in emulsions to give new applications in fuel cells and other fields.

A simple route to diverse noble metal-decorated iron oxide nanoparticles for catalysis

Developing facile synthetic routes to multifunctional nanoparticles combining the magnetic properties of iron oxides with the optical and catalytic utility of noble metal particles remains an important goal in realizing the potential of hybrid nanomaterials. To this end, we have developed a single route to noble metal-decorated magnetic nanoparticles (Fe3O4@SiO2-M; M = Au, Pd, Ag, and PtAg) and characterized them by HRTEM and STEM/EDX imaging to reveal their nanometer size (16 nm Fe3O4 and 1-5 nm M seeds) and uniformity. This represents one of the few examples of genuine multifunctional particles on the nanoscale. We show that these hybrid structures have excellent catalytic activity for the reduction of 4-nitrophenol (knorm = 2 × 10(7) s(-1) mol(Pd)(-1); 5 × 10(6) s(-1) mol(Au)(-1); 5 × 10(5) s(-1) mol(PtAg)(-1); 7 × 10(5) s(-1) mol(Ag)(-1)). These rates are the highest reported for nano-sized comparables, and are competitive with mesoparticles of similar composition. Due to their magnetic response, the particles are also suitable for magnetic recovery and maintain >99% conversion for at least four cycles. Using this synthetic route, Fe3O4@SiO2-M particles show great promise for further development as a precursor to complicated anisotropic materials or for applications ranging from nanocatalysis to biomedical sensing.

Influence of Surfactant Bilayers on the Refractive Index Sensitivity and Catalytic Properties of Anisotropic Gold Nanoparticles

Shape-controlled synthesis of gold nanoparticles generally involves the use of surfactants, typically cetyltrimethylammonium (CTAX, X = Cl(-) , Br(-)), to regulate the nucleation growth process and to obtain colloidally stable nanoparticles. The surfactants adsorb on the nanoparticle surface making further functionalization difficult and therefore limit their use in many applications. Herein, the influence of CTAX on nanoparticle sensitivity to local dielectric environment changes is reported. It is shown, both experimentally and theoretically, that the CTAX bilayer significantly reduces the refractive index (RI) sensitivity of anisotropic gold nanoparticles such as nanocubes and concave nanocubes, nanorods, and nanoprisms. The RI sensitivity can be increased by up to 40% by removing the surfactant layer from nanoparticles immobilized on a solid substrate using oxygen plasma treatment. This increase compensates for the otherwise problematic decrease in RI sensitivity caused by the substrate effect. Moreover, the removal of the surfactants both facilitates nanoparticle biofunctionalization and significantly improves their catalytic properties. The strategy presented herein is a simple yet effective universal method for enhancing the RI sensitivity of CTAX-stabilized gold nanoparticles and increasing their potential as transducers in nanoplasmonic sensors, as well as in catalytic and biomedical applications.

Electrochemically-responsive magnetic nanoparticles for reversible protein adsorption

Electrochemically-responsive magnetic hybrid nanoparticles are designed and prepared to achieve electrochemically-controlled reversible separation of proteins.

A magnetically recyclable iron oxide-supported copper oxide nanocatalyst (Fe3O4–CuO) for one-pot synthesis of S-aryl dithiocarbamates under solvent-free conditions

A convenient preparation of S-aryl dithiocarbamates from amine, carbon disulfide and aryl iodide was developed by using the Fe₃O₄–CuO nanocatalyst under solvent free conditions.

Spidery catalyst for the synthesis of quinazoline-2,4(1H,3H)-diones

In this study, a novel fibrous nanosilica (KCC-1) based nanocatalyst (Au, Pd, and Cu) with a high surface area and easy accessibility of active sites was successfully developed by a facile approach.