Enhanced optical transmission mediated by localized plasmons in anisotropic, three-dimensional nanohole arrays

Enhanced Optical Transmission through a Hybrid Bull's Eye Structure Integrated with a Silicon Hemisphere

In this work, we demonstrate a novel structure that can generate extraordinary optical transmission with a silicon hemisphere placed on a conventional bull's eye structure. There is a single subwavelength aperture surrounded by concentric periodic grooves on a substrate. The extraordinary optical transmission in this work is realized by the coupling of the surface plasmon polaritons in the periodic grooves and the localized electromagnetic field generated by the Mie resonance in the silicon hemisphere. The maximum normalized-to-area transmission peak can reach up to 662 with a decreasing device area and size. The electromagnetic field distribution at different geometry parameters is analyzed to clarify the mechanisms of the work in this paper. Additionally, the use of dielectric material in the aperture can avoid ohmic losses of metal material compared with the conventional one, which may suggest that a wider range of bull's-eye-structure applications is possible.

Effective electrical resistivity in a square array of oriented square inclusions

The continuing miniaturization of optoelectronic devices, alongside the rise of electromagnetic metamaterials, poses an ongoing challenge to nanofabrication. With the increasing impracticality of quality control at a single-feature (-device) resolution, there is an increasing demand for array-based metrologies, where compliance to specifications can be monitored via signals arising from a multitude of features (devices). To this end, a square grid with quadratic sub-features is amongst the more common designs in nanotechnology (e.g. nanofishnets, nanoholes, nanopyramids, μLED arrays etc). The electrical resistivity of such a quadratic grid may be essential to its functionality; it can also be used to characterize the critical dimensions of the periodic features. While the problem of the effective electrical resistivity ρ _eff of a thin sheet with resistivity ρ ₁, hosting a doubly-periodic array of oriented square inclusions with resistivity ρ ₂, has been treated before (Obnosov 1999 SIAM J. Appl. Math. 59 1267-87), a closed-form solution has been found for only one case, where the inclusion occupies c = 1/4 of the unit cell. Here we combine first-principle approximations, numerical modeling, and mathematical analysis to generalize ρ _eff for an arbitrary inclusion size (0 < c < 1). We find that in the range 0.01 ≤ c ≤ 0.99, ρ _eff may be approximated (to within <0.3% error with respect to finite element simulations) by: [Formula: see text] [Formula: see text] whereby at the limiting cases of c → 0 and c → 1, α approaches asymptotic values of α = 2.039 and α = 1/c - 1, respectively. The applicability of the approximation to considerably more complex structures, such as recursively-nested inclusions and/or nonplanar topologies, is demonstrated and discussed. While certainly not limited to, the theory is examined from within the scope of micro four-point probe (M4PP) metrology, which currently lacks data reduction schemes for periodic materials whose cell is smaller than the typical μm-scale M4PP footprint.

Ultraflat Sub-10 Nanometer Gap Electrodes for Two-Dimensional Optoelectronic Devices

Two-dimensional (2D) materials are promising candidates for building ultrashort-channel devices because their thickness can be reduced down to a single atomic layer. Here, we demonstrate an ultraflat nanogap platform based on atomic layer deposition (ALD) and utilize the structure to fabricate 2D material-based optical and electronic devices. In our method, ultraflat metal surfaces, template-stripped from a Si wafer mold, are separated by an Al₂O₃ ALD layer down to a gap width of 10 nm. Surfaces of both electrodes are vertically aligned without a height difference, and each electrode is ultraflat with a measured root-mean-square roughness as low as 0.315 nm, smaller than the thickness of monolayer graphene. Simply by placing 2D material flakes on top of the platform, short-channel field-effect transistors based on black phosphorus and MoS₂ are fabricated, exhibiting their typical transistor characteristics. Furthermore, we use the same platform to demonstrate photodetectors with a nanoscale photosensitive channel, exhibiting higher photosensitivity compared to microscale gap channels. Our wafer-scale atomic layer lithography method can benefit a diverse range of 2D optical and electronic applications.

Anisotropic nanomaterials for shape-dependent physicochemical and biomedical applications

This review contributes towards a systematic understanding of the mechanism of shape-dependent effects on nanoparticles (NPs) for elaborating and predicting their properties and applications based on the past two decades of research. Recently, the significance of shape-dependent physical chemistry and biomedicine has drawn ever increasing attention. While there has been a great deal of effort to utilize NPs with different morphologies in these fields, so far research studies are largely localized in particular materials, synthetic methods, or biomedical applications, and have ignored the interactional and interdependent relationships of these areas. This review is a comprehensive description of the NP shapes from theory, synthesis, property to application. We figure out the roles that shape plays in the properties of different kinds of nanomaterials together with physicochemical and biomedical applications. Through systematic elaboration of these shape-dependent impacts, better utilization of nanomaterials with diverse morphologies would be realized and definite strategies would be expected for breakthroughs in these fields. In addition, we have proposed some critical challenges and open problems that need to be addressed in nanotechnology.

Tailoring Nanohole Plasmonic Resonance with Light-Responsive Azobenzene Compound

Metal-based nanohole structures, featuring a continuous matrix and discrete voids, have seen a wide spectrum of practical applications, ranging from plasmonic sensing to extraordinary optical transmission. It would not be uncommon to pursue further enhancement of their optical tunability, and incorporation with other functional materials offers an intriguing lead. In this study, the first step involves colloidal lithography fabrication of gold-based, short-range ordered nanohole structures on a glass substrate with varying geometrical parameters. Plasmonic resonance in optical waveband is readily achieved from the coupling between bonding surface plasmons and nanohole lattices. Resonant features observed in transmission measurements could also be well reproduced both from numerical simulations as well as theoretical calculations based on the grating coupling mechanism. With the introduction of a thin layer of azobenzene compound by spin-coating comes the critical transformation that not only alters optical performances by impacting the surface environment but also bestows the structures with light responsiveness. After 488 nm of laser irradiation, it is observed that the structures underwent cross polarization conversion, which could be attributed to the photoalignment behavior from trans-cis isomerization within the azobenzene layer, yielding further optical tunability with the linearly polarized probe light compared to that in the preirradiated state. The tuning of plasmonic resonances through light stimuli paves a noncontacting path for achieving desired optical responses with potentially high spatial and temporal resolution. This work may serve as a fountainhead for future efforts on optically tailorable photonic devices associated with nanohole plasmonics.

Modal analysis of metallic screen with finite conductivity perforated by array of subwavelength rectangular flared holes

An array of flared rectangular holes pierced through a conducting screen is treated herein by a rigorous full-wave modal analysis using the moment method entailing Green's functions for rectangular cavities and planar multilayer structures in the spectral domain as well as classical Floquet theorem and the mode-matching technique. In this way, flared holes with arbitrary taper profile that may each even be composed of different dielectric sections and which perforated metal films that may be sandwiched between multiple layers of dielectric slabs on both sides is herein treated. The eclectic permutations of geometrical, structural, and material attributes thus afforded by this generic topology facilitate correspondingly diverse investigations that may prove pivotal to the success of future explorations in search for new breakthrough discoveries and innovations in the subject of extraordinary transmission through subwavelength hole arrays, to which the herein-analyzed configuration is central. Oblique angles of incidence for both principal polarizations and metal losses incurred by imperfect conducting screens are also investigated in this work, all constituting crucial aspects that may often be neglected.

Fast and Versatile Multiscale Patterning by Combining Template-Stripping with Nanotransfer Printing

Metal nanostructures are widely used in plasmonic and electronic applications due to their inherent properties. Often, the fabrication of such nanostructures is limited to small areas, as the processing is costly, low-throughput, and comprises harsh fabrication conditions. Here, we introduce a template-stripping based nanotransfer printing method to overcome these limitations. This versatile technique enables the transfer of arbitrary thin film metal structures onto a variety of substrates, including glass, Kapton, silicon, and PDMS. Structures can range from tens of nanometers to hundreds of micrometers over a wafer scale area. The process is organic solvent-free, multilayer compatible, and only takes minutes to perform. The stability of the transferred gold structures on glass exceeds by far those fabricated by e-beam evaporation. Therefore, an adhesion layer is no longer needed, enabling a faster and cheaper fabrication as well as the production of superior nanostructures. Structures can be transferred onto curved substrates, and the technique is compatible with roll-to-roll fabrication; thus, the process is suitable for flexible and stretchable electronics.

Using Extraordinary Optical Transmission to Quantify Cardiac Biomarkers in Human Serum

For a biosensing platform to have clinical relevance in point-of-care (POC) settings, assay sensitivity, reproducibility, and ability to reliably monitor analytes against the background of human serum are crucial. Nanoimprinting lithography (NIL) was used to fabricate, at a low cost, sensing areas as large as 1.5 mm x 1.5 mm. The sensing surface was made of high-fidelity arrays of nanoholes, each with an area of about 140 nm². The great reproducibility of NIL made it possible to employ a one-chip, one-measurement strategy on 12 individually manufactured surfaces, with minimal chip-to-chip variation. These nanoimprinted localized surface plasmon resonance (LSPR) chips were extensively tested on their ability to reliably measure a bioanalyte at concentrations varying from 2.5 to 75 ng/mL amidst the background of a complex biofluid-in this case, human serum. The high fidelity of NIL enables the generation of large sensing areas, which in turn eliminates the need for a microscope, as this biosensor can be easily interfaced with a commonly available laboratory light source. These biosensors can detect cardiac troponin in serum with a high sensitivity, at a limit of detection (LOD) of 0.55 ng/mL, which is clinically relevant. They also show low chip-to-chip variance (due to the high quality of the fabrication process). The results are commensurable with widely used enzyme-linked immunosorbent assay (ELISA)-based assays, but the technique retains the advantages of an LSPR-based sensing platform (i.e., amenability to miniaturization and multiplexing, making it more feasible for POC applications).

Flexible Plasmonic Color Filters Fabricated via Nanotransfer Printing with Nanoimprint-Based Planarization

We investigated the preparation and performance of large-area transmission-type flexible plasmonic color filters (PCFs). These large-area PCFs were fabricated based on a nanotransfer printing (nTP) process that involves nanoimprint-based planarization. This process is a simple surface treatment for easy transfer of a metal to a flexible plastic substrate and formation of patterned aluminum nanodots and nanoholes on a substrate surface with poor roughness. Rabbit-ear structures can form during the nTP process, and this phenomenon was analyzed by numerical simulation. As defects were not detected in a 10 000-round bending test, the PCFs fabricated using this nTP process have excellent mechanical properties.

Near-field surface plasmons on quasicrystal metasurfaces

Excitation and manipulation of surface plasmons (SPs) are essential in developing cutting-edge plasmonic devices for medical diagnostics, biochemical spectroscopy and communications. The most common approach involves designing an array of periodic slits or grating apertures that enables coupling of the incident light to the SP modes. In recent years, plasmonic resonances, including extraordinary optical transmission through periodic arrays, quasicrystals and random aperture arrays, have been investigated in the free space. However, most of the studies have been limited to the far field detection of the transmission resonance. Here, we perform near-field measurements of the SPs on quasicrystal metasurfaces. We discover that the reciprocal vector determines the propagation modes of the SPs in the quasicrystal lattice which can be well explained by the quasi-momentum conservation rule. Our findings demonstrate vast potential in developing plasmonic metasurfaces with unique device functionalities that are controlled by the propagation modes of the SPs in quasicrystals.

Split-Wedge Antennas with Sub-5 nm Gaps for Plasmonic Nanofocusing

We present a novel plasmonic antenna structure, a split-wedge antenna, created by splitting an ultrasharp metallic wedge with a nanogap perpendicular to its apex. The nanogap can tightly confine gap plasmons and boost the local optical field intensity in and around these opposing metallic wedge tips. This three-dimensional split-wedge antenna integrates the key features of nanogaps and sharp tips, i.e., tight field confinement and three-dimensional nanofocusing, respectively, into a single platform. We fabricate split-wedge antennas with gaps that are as small as 1 nm in width at the wafer scale by combining silicon V-grooves with template stripping and atomic layer lithography. Computer simulations show that the field enhancement and confinement are stronger at the tip-gap interface compared to what standalone tips or nanogaps produce, with electric field amplitude enhancement factors exceeding 50 when near-infrared light is focused on the tip-gap geometry. The resulting nanometric hotspot volume is on the order of λ³/10⁶. Experimentally, Raman enhancement factors exceeding 10⁷ are observed from a 2 nm gap split-wedge antenna, demonstrating its potential for sensing and spectroscopy applications.

Fabrication and modelling of fractal, biomimetic, micro and nano-topographical surfaces

Natural surface topographies are often self-similar with hierarchical features at the micro and nanoscale, which may be mimicked to overcome modern tissue engineering and biomaterial design limitations. Specifically, a cell's microenvironment within the human body contains highly optimised, fractal topographical cues, which directs precise cell behaviour. However, recreating biomimetic, fractal topographies in vitro is not a trivial process and a number of fabrication methods have been proposed but often fail to precisely control the spatial resolution of features at different lengths scales and hence, to provide true biomimetic properties. Here, we propose a method of accurately reproducing the self-similar, micro and nanoscale topography of a human biological tissue into a synthetic polymer through an innovative fabrication process. The biological tissue surface was characterised using atomic force microscopy (AFM) to obtain spatial data in X, Y and Z, which was converted into a grayscale 'digital photomask'. As a result of maskless grayscale optical lithography followed by modified deep reactive ion etching and replica molding, we were able to accurately reproduce the fractal topography of acellular dermal matrix (ADM) into polydimethylsiloxane (PDMS). Characterisation using AFM at three different length scales revealed that the nano and micro-topographical features, in addition to the fractal dimension, of native ADM were reproduced in PDMS. In conclusion, it has been shown that the fractal topography of biological surfaces can be mimicked in synthetic materials using the novel fabrication process outlined, which may be applied to significantly enhance medical device biocompatibility and performance.

Size-Reduction Template Stripping of Smooth Curved Metallic Tips for Adiabatic Nanofocusing of Surface Plasmons

We present a new technique to engineer metallic interfaces to produce sharp tips with smooth curved surfaces and variable tip angles, as well as ridges with arbitrary contour shapes, all of which can be integrated with grating couplers for applications in plasmonics and nanophotonics. We combine template stripping, a nanofabrication scheme, with atomic layer deposition (ALD) to produce the ultrasharp nanoscale tips and wedges using only conventional photolithography. Conformal ALD coating of insulators over silicon trench molds of various shapes reduces their widths to make nanoscale features without high-resolution lithography. Along with a metal deposition and template stripping, this size-reduction scheme can mass-produce narrow and ultrasharp (<10 nm radius of curvature) metallic wedges and tips over an entire 4 in. wafer. This size-reduction scheme can create metallic tips out of arbitrary trench patterns that have smooth curved surfaces to facilitate efficient adiabatic nanofocusing which will benefit applications in near-field optical spectroscopy, plasmonic waveguides, particle trapping, hot-electron plasmonics, and nonlinear optics.

Self-aligned grating couplers on template-stripped metal pyramids via nanostencil lithography

We combine nanostencil lithography and template stripping to create self-aligned patterns about the apex of ultrasmooth metal pyramids with high throughput. Three-dimensional patterns such as spiral and asymmetric linear gratings, which can couple incident light into a hot spot at the tip, are presented as examples of this fabrication method. Computer simulations demonstrate that spiral and linear diffraction grating patterns are both effective at coupling light to the tip. The self-aligned stencil lithography technique can be useful for integrating plasmonic couplers with sharp metallic tips for applications such as near-field optical spectroscopy, tip-based optical trapping, plasmonic sensing, and heat-assisted magnetic recording.

Plasmonic Nanohole Sensor for Capturing Single Virus-Like Particles toward Virucidal Drug Evaluation

A plasmonic nanohole sensor for virus-like particle capture and virucidal drug evaluation is reported. Using a materials-selective surface functionalization scheme, passive immobilization of virus-like particles only within the nanoholes is achieved. The findings demonstrate that a low surface coverage of particles only inside the functionalized nanoholes significantly improves nanoplasmonic sensing performance over conventional nanohole arrays.

Template-Stripped Tunable Plasmonic Devices on Stretchable and Rollable Substrates

We use template stripping to integrate metallic nanostructures onto flexible, stretchable, and rollable substrates. Using this approach, high-quality patterned metals that are replicated from reusable silicon templates can be directly transferred to polydimethylsiloxane (PDMS) substrates. First we produce stretchable gold nanohole arrays and show that their optical transmission spectra can be modulated by mechanical stretching. Next we fabricate stretchable arrays of gold pyramids and demonstrate a modulation of the wavelength of light resonantly scattered from the tip of the pyramid by stretching the underlying PDMS film. The use of a flexible transfer layer also enables template stripping using a cylindrical roller as a substrate. As an example, we demonstrate roller template stripping of metallic nanoholes, nanodisks, wires, and pyramids onto the cylindrical surface of a glass rod lens. These nonplanar metallic structures produced via template stripping with flexible and stretchable films can facilitate many applications in sensing, display, plasmonics, metasurfaces, and roll-to-roll fabrication.

Plasmonic Tipless Pyramid Arrays for Cell Poration

Improving the efficiency, cell survival, and throughput of methods to modify and control the genetic expression of cells is of great benefit to biology and medicine. We investigate, both computationally and experimentally, a nanostructured substrate made of tipless pyramids for plasmonic-induced transfection. By optimizing the geometrical parameters for an excitation wavelength of 800 nm, we demonstrate a 100-fold intensity enhancement of the electric near field at the cell-substrate contact area, while the low absorption typical for gold is maintained. We demonstrate that such a substrate can induce transient poration of cells by a purely optically induced process.

Quantification of a cardiac biomarker in human serum using extraordinary optical transmission (EOT)

Nanoimprinting lithography (NIL) is a manufacturing process that can produce macroscale surface areas with nanoscale features. In this paper, this technique is used to solve three fundamental issues for the application of localized surface plasmonic resonance (LSPR) in practical clinical measurements: assay sensitivity, chip-to-chip variance, and the ability to perform assays in human serum. Using NIL, arrays of 140 nm square features were fabricated on a sensing area of 1.5 mm x 1.5 mm with low cost. The high reproducibility of NIL allowed for the use of a one-chip, one-measurement approach with 12 individually manufactured surfaces with minimal chip-to-chip variations. To better approximate a real world setting, all chips were modified with a biocompatible, multi-component monolayer and inter-chip variability was assessed by measuring a bioanalyte standard (2.5-75 ng/ml) in the presence of a complex biofluid, human serum. In this setting, nanoimprinted LSPR chips were able to provide sufficient characteristics for a 'low-tech' approach to laboratory-based bioanalyte measurement, including: 1) sufficient size to interface with a common laboratory light source and detector without the need for a microscope, 2) high sensitivity in serum with a cardiac troponin limit of detection of 0.55 ng/ml, and 3) very low variability in chip manufacturing to produce a figure of merit (FOM) of 10.5. These findings drive LSPR closer to technical comparability with ELISA-based assays while preserving the unique particularities of a LSPR based sensor, suitability for multiplexing and miniaturization, and point-of-care detections.

Plasmonic optical interference

Understanding optical interference is of great importance in fundamental and analytical optical design for next-generation personal, industrial, and military applications. So far, various researches have been performed for optical interference phenomena, but there have been no reports on plasmonic optical interference. Here, we report that optical interference could be effectively coupled with surface plasmons, resulting in enhanced optical absorption. We prepared a three-dimensional (3D) plasmonic nanostructure that consists of a plasmonic layer at the top, a nanoporous dielectric layer at the center, and a mirror layer at the bottom. The plasmonic layer mediates strong plasmonic absorption when the constructive interference pattern is matched with the plasmonic component. By tailoring the thickness of the dielectric layer, the strong plasmonic absorption can facilely be controlled and covers the full visible range. The plasmonic interference in the 3D nanostructure thus creates brilliant structural colors. We develop a design equation to determine the thickness of the dielectric layer in a 3D plasmonic nanostructure that could create the maximum absorption at a given wavelength. It is further demonstrated that the 3D plasmonic nanostructure can be realized on a flexible substrate. Our 3D plasmonic nanostructures will have a huge impact on the fields of optoelectronic systems, biochemical optical sensors, and spectral imaging.

Individual Template-Stripped Conductive Gold Pyramids for Tip-Enhanced Dielectrophoresis

Gradient fields of optical, magnetic, or electrical origin are widely used for the manipulation of micro- and nanoscale objects. Among various device geometries to generate gradient forces, sharp metallic tips are one of the most effective. Surface roughness and asperities present on traditionally produced tips reduce trapping efficiencies and limit plasmonic applications. Template-stripped, noble metal surfaces and structures have sub-nm roughness and can overcome these limits. We have developed a process using a mix of conductive and dielectric epoxies to mount template-stripped gold pyramids on tungsten wires that can be integrated with a movable stage. When coupled with a transparent indium tin oxide (ITO) electrode, the conductive pyramidal tip functions as a movable three-dimensional dielectrophoretic trap which can be used to manipulate submicrometer-scale particles. We experimentally demonstrate the electrically conductive functionality of the pyramidal tip by dielectrophoretic manipulation of fluorescent beads and concentration of single-walled carbon nanotubes, detected with fluorescent microscopy and Raman spectroscopy.

Tuning the 3D plasmon field of nanohole arrays

Modern photonics is being revolutionized through the use of nanostructured plasmonic materials, which confine light to sub-diffraction limit resolution providing universal, sensitive, and simple transducers for molecular sensors. Understanding the mechanisms by which light interacts with plasmonic crystals is essential for developing application-focussed devices. The strong influence of grating coupling on electromagnetic field distribution, frequency and degeneracy of plasmon bands has now been characterized using hexagonal nanohole arrays. An equation for nanohole arrays was derived to demonstrate the strong influence of incidence and rotation angle on optical properties of 2D plasmonic crystals such as nanohole arrays. Consequently, we report experimental data that are in strong agreement with finite difference time-domain (FDTD) simulations that clearly demonstrate the influence of the grating coupling conditions on the optical properties (such as plasmon degeneracy and bandwidth), and on the distribution of the plasmon field around nanohole arrays (including tuneable penetration depths and highly localized fields). The tuneable 3D plasmon field allowed for controlled sensing properties and by increasing the angle of incidence to 30 degrees, the resonance wavelength was tuned from 1000 to 600 nm, and the sensitivity was enhanced by nearly 300% for a protein assay using surface plasmon resonance (SPR) and by 40% with surface-enhanced Raman scattering (SERS) sensors.

Trends and challenges of refractometric nanoplasmonic biosensors: a review

Motivated by potential benefits such as sensor miniaturization, multiplexing opportunities and higher sensitivities, refractometric nanoplasmonic biosensing has profiled itself in a short time span as an interesting alternative to conventional Surface Plasmon Resonance (SPR) biosensors. This latter conventional sensing concept has been subjected during the last decades to strong commercialization, thereby strongly leaning on well-developed thin-film surface chemistry protocols. Not surprisingly, the examples found in literature based on this sensing concept are generally characterized by extensive analytical studies of relevant clinical and diagnostic problems. In contrast, the more novel Localized Surface Plasmon Resonance (LSPR) alternative finds itself in a much earlier, and especially, more fundamental stage of development. Driven by new fabrication methodologies to create nanostructured substrates, published work typically focuses on the novelty of the presented material, its optical properties and its use - generally limited to a proof-of-concept - as a label-free biosensing scheme. Given the different stages of development both SPR and LSPR sensors find themselves in, it becomes apparent that providing a comparative analysis of both concepts is not a trivial task. Nevertheless, in this review we make an effort to provide an overview that illustrates the progress booked in both fields during the last five years. First, we discuss the most relevant advances in SPR biosensing, including interesting analytical applications, together with different strategies that assure improvements in performance, throughput and/or integration. Subsequently, the remaining part of this work focuses on the use of nanoplasmonic sensors for real label-free biosensing applications. First, we discuss the motivation that serves as a driving force behind this research topic, together with a brief summary that comprises the main fabrication methodologies used in this field. Next, the sensing performance of LSPR sensors is examined by analyzing different parameters that can be invoked in order to quantitatively assess their overall sensing performance. Two aspects are highlighted that turn out to be especially important when trying to maximize their sensing performance, being (1) the targeted functionalization of the electromagnetic hotspots of the nanostructures, and (2) overcoming inherent negative influence that stem from the presence of a high refractive index substrate that supports the nanostructures. Next, although few in numbers, an overview is given of the most exhaustive and diagnostically relevant LSPR sensing assays that have been recently reported in literature, followed by examples that exploit inherent LSPR characteristics in order to create highly integrated and high-throughput optical biosensors. Finally, we discuss a series of considerations that, in our opinion, should be addressed in order to bring the realization of a stand-alone LSPR biosensor with competitive levels of sensitivity, robustness and integration (when compared to a conventional SPR sensor) much closer to reality.

Tailoring hexagonally packed metal hollow-nanocones and taper-nanotubes by template-induced preferential electrodeposition

We report a template-induced preferential electrodeposition method for tailoring hexagonally packed metal hollow-nanocones and taper-nanotubes. After sputtering a layer of Au film, anodized aluminum foils with controllable periods and depths of taper-nanopore templates can be directly used as cathodes. Nanonipples on the top-layer of alumina taper-nanopores can cause the "tip effect" during electrodeposition, which makes the metal deposition rate far rapider at the surface of templates than that at the lateral walls and the bottom of nanopores. Accordingly, the pore opening of the template can be rapidly closed while their interior is still hollow. Based on this principle, ordered arrayed of hollow-nanocones with controllable periods (e.g., 100, 200, and 300 nm) and material composition (e.g., Ni, Fe, and Cu) can be realized in a simple, inexpensive, and accessible way. Besides, hexagonally packed metal taper-nanotubes can also be obtained by skillfully making use of the combination of both the "tip effect" and "self-masking" effect of relatively deeper (e.g., 576 nm) taper-nanopores during Au sputtering. Our work opens a door for studying the physical and chemical properties of hexagonally packed hollow-nanocones and tapered-nanotubes made of various metal materials.

Colloidal assembly directed by virtual magnetic moulds

Interest in assemblies of colloidal particles has long been motivated by their applications in photonics, electronics, sensors and microlenses. Existing assembly schemes can position colloids of one type relatively flexibly into a range of desired structures, but it remains challenging to produce multicomponent lattices, clusters with precisely controlled symmetries and three-dimensional assemblies. A few schemes can efficiently produce complex colloidal structures, but they require system-specific procedures. Here we show that magnetic field microgradients established in a paramagnetic fluid can serve as 'virtual moulds' to act as templates for the assembly of large numbers (∼10(8)) of both non-magnetic and magnetic colloidal particles with micrometre precision and typical yields of 80 to 90 per cent. We illustrate the versatility of this approach by producing single-component and multicomponent colloidal arrays, complex three-dimensional structures and a variety of colloidal molecules from polymeric particles, silica particles and live bacteria and by showing that all of these structures can be made permanent. In addition, although our magnetic moulds currently resemble optical traps in that they are limited to the manipulation of micrometre-sized objects, they are massively parallel and can manipulate non-magnetic and magnetic objects simultaneously in two and three dimensions.

Three-dimensional patterning and morphological control of porous nanomaterials by gray-scale direct imprinting

We present a method for direct three-dimensional (3D) patterning of porous nanomaterials through the application of a premastered and reusable gray-scale stamp. Four classes of 3D nanostructures are demonstrated for the first time in porous media: gradient profiles, digital patterns, curves and lens shapes, and sharp features including v-grooves, nano-pits, and ‘cookie-cutter’ particles. Further, we demonstrate this technique enables morphological tuning and direct tailoring of nanomaterial properties, including porosity, average pore size, dielectric constant, and plasmonic response. This work opens a rapid and low-cost route for fabricating novel nanostructures and devices utilizing porous nanomaterials, with promising applications spanning diffractive and plasmonic sensing, holography, micro- and transformation optics, and drug delivery and imaging.

Wafer-scale pattern transfer of metal nanostructures on polydimethylsiloxane (PDMS) substrates via holographic nanopatterns

In this paper, we report on a cost-effective and simple, nondestructive pattern transfer method that allows the fabrication of metallic nanostructures on a polydimethylsiloxane (PDMS) substrate on a wafer scale. The key idea is to use holographic nanopatterns of a photoresist (PR) layer as template structures, where a metal film is directly deposited in order to replicate the nanopatterns of the PR template layer. Then, the PDMS elastomer is molded onto the metal film and the metal/PDMS composite layer is directly peeled off from the PR surface. Many metallic materials including Ti, Al, and Ag were successfully nanopatterned on PDMS substrates by the pattern transfer process with no use of any adhesion promoter layer or coating. In case of Au that has poor adhesion to PDMS material, a salinization of the metal surface with 3-(aminopropyl)-triethoxysilane (APTES) monolayer promoted the adhesion and led to successful pattern transfer. A series of adhesion tests confirmed the good adhesion of the transferred metal films onto the molded PDMS substrates, including scotch-tape and wet immersion tests. The inexpensive and robust pattern transfer approach of metallic nanostructures onto transparent and flexible PDMS substrates will open the new door for many scientific and engineering applications such as micro-/nanofluidics, optofluidics, nanophotonics, and nanoelectronics.

Tuning the plasmon resonance of a nano-mouth array

We have developed a method to fabricate a silver nano-mouth array via a cost-effective inverted hemispherical colloidal lithography method. It shows that the nano-mouth supports a strong localized surface plasmon resonance, which results in an extraordinary optical transmission peak. When the nano-mouth array is transferred onto a polydimethylsiloxane (PDMS) substrate, we show that the localized surface plasmon resonance can be tuned via the swelling and recovery of the PDMS in ethyl acetate solvent. The resonant peak can be tuned with a relative bandwidth of over 10%. We also demonstrate the refractive index sensitivity of the nano-mouth array at a wavelength of 1300 nm. This structure might be useful for optical microfluidic devices and sensors.

Extraordinary Transmission of Three-Dimensional Crescent-like Holes Arrays

We developed a method to fabricate a periodic array of three-dimensional crescent-like holes (3DCLH) via an inverted hemispherical colloidal lithography. It is found that there exists an extraordinary optical transmission in this non-planar perforated periodic array of 3DCLH when the electric field of the incident light is perpendicular to the cross-line of the crescent-like hole. This extraordinary optical peak is insensitive with the incident angles and sensitive with the angle between the electric field of the incident light to the cross-line of the 3DCLH. Numerical simulation based on finite-difference time-domain method reveals that this peak is caused by an asymmetric localized surface plasmon resonance. This structure might be useful for the optical sensing and optical-integrated circuits.

Fabrication of non-planar silver nano-arc-gap arrays

We developed a method to fabricate an array of silver non-planar nano-arc-gaps via inverted hemispherical colloidal lithography and shadow metal evaporation methods. It is found that there is a localized surface plasmon mode which results in extraordinary optical transmission. The electric field is strongly localized at the nano-arc-gap region and therefore induces a resonance that has an ultra-small mode volume of less than 2.44 × 10(-6) μm(3). The ratio of the quality factor to the mode volume is as high as 1.44 × 10(6) μm(-3). This would be valuable for the design of optoelectric circuits.

Engineering metallic nanostructures for plasmonics and nanophotonics

Metallic nanostructures now play an important role in many applications. In particular, for the emerging fields of plasmonics and nanophotonics, the ability to engineer metals on nanometric scales allows the development of new devices and the study of exciting physics. This review focuses on top-down nanofabrication techniques for engineering metallic nanostructures, along with computational and experimental characterization techniques. A variety of current and emerging applications are also covered.

Facile assembly of micro- and nanoarrays for sensing with natural cell membranes

Microarray technology has facilitated many powerful high-throughput studies in the fields of genetics and proteomics, among others. However, preparation of microarrays composed of cell-derived membranes with embedded receptors has proven difficult. Here we describe a new method for forming microarrays composed of synthetic lipid vesicles and natural cell membranes. The method is based upon assembly of vesicles and natural membranes into recessed micro- and nanowells and using a polydimethylsiloxane (PDMS) block as a "squeegee." This method is used to assemble phospholipid vesicles into arrays with micrometer and nanoscale dimensions. Native myelin and neuronal lipid raft arrays are also formed in 30 min or less. We show the natural membrane arrays can be used for sensing lipid-protein interactions by detecting cholera toxin binding to ganglioside GM1 in neuronal lipid rafts. In multicomponent arrays myelin can be distinguished from neuronal rafts by antibody binding to cell-specific surface antigens. Finally, myelin arrays formed in gold nanowells are used for surface plasmon resonance sensing. This assembly approach is simple, broadly applicable, and opens up new avenues of research not easily accomplished with standard microarray technology.

Template-stripped smooth Ag nanohole arrays with silica shells for surface plasmon resonance biosensing

Inexpensive, reproducible, and high-throughput fabrication of nanometric apertures in metallic films can benefit many applications in plasmonics, sensing, spectroscopy, lithography, and imaging. Here we use template-stripping to pattern periodic nanohole arrays in optically thick, smooth Ag films with a silicon template made via nanoimprint lithography. Ag is a low-cost material with good optical properties, but it suffers from poor chemical stability and biocompatibility. However, a thin silica shell encapsulating our template-stripped Ag nanoholes facilitates biosensing applications by protecting the Ag from oxidation as well as providing a robust surface that can be readily modified with a variety of biomolecules using well-established silane chemistry. The thickness of the conformal silica shell can be precisely tuned by atomic layer deposition, and a 15 nm thick silica shell can effectively prevent fluorophore quenching. The Ag nanohole arrays with silica shells can also be bonded to polydimethylsiloxane (PDMS) microfluidic channels for fluorescence imaging, formation of supported lipid bilayers, and real-time, label-free SPR sensing. Additionally, the smooth surfaces of the template-stripped Ag films enhance refractive index sensitivity compared with as-deposited, rough Ag films. Because nearly centimeter-sized nanohole arrays can be produced inexpensively without using any additional lithography, etching, or lift-off, this method can facilitate widespread applications of metallic nanohole arrays for plasmonics and biosensing.

Chemically functionalized surface patterning

Patterning substrates with versatile chemical functionalities from micro- to nanometer scale is a long-standing and interesting topic. This review provides an overview of a range of techniques commonly used for surface patterning. The first section briefly introduces conventional micropatterning tools, such as photolithography and microcontact printing. The second section focuses on the currently used nanolithographic techniques, for example, scanning probe lithography (SPL), and their applications in surface patterning. Their advantages and disadvantages are also demonstrated. In the last section, dip-pen nanolithography (DPN) is emphatically illustrated, with a particular stress on the patterning and applications of biomolecules.

Unconventional low-cost fabrication and patterning techniques for point of care diagnostics

The potential of rapid, quantitative, and sensitive diagnosis has led to many innovative ‘lab on chip’ technologies for point of care diagnostic applications. Because these chips must be designed within strict cost constraints to be widely deployable, recent research in this area has produced extremely novel non-conventional micro- and nano-fabrication innovations. These advances can be leveraged for other biological assays as well, including for custom assay development and academic prototyping. The technologies reviewed here leverage extremely low-cost substrates and easily adoptable ways to pattern both structural and biological materials at high resolution in unprecedented ways. These new approaches offer the promise of more rapid prototyping with less investment in capital equipment as well as greater flexibility in design. Though still in their infancy, these technologies hold potential to improve upon the resolution, sensitivity, flexibility, and cost-savings over more traditional approaches.

Membrane protein biosensing with plasmonic nanopore arrays and pore-spanning lipid membranes

Integration of solid-state biosensors and lipid bilayer membranes is important for membrane protein research and drug discovery. In these sensors, it is critical that the solid-state sensing material does not have adverse effects on the conformation or functionality of membrane-bound molecules. In this work, pore-spanning lipid membranes are formed over an array of periodic nanopores in free-standing gold films for surface plasmon resonance (SPR) kinetic binding assays. The ability to perform kinetic assays with a transmembrane protein is demonstrated with α-hemolysin (α-HL). The incorporation of α-HL into the membrane followed by specific antibody binding (anti-α-HL) red-shifts the plasmon resonance of the gold nanopore array, which is optically monitored in real time. Subsequent fluorescence imaging reveals that the antibodies primarily bind in nanopore regions, indicating that α-HL incorporation preferentially occurs into areas of pore-spanning lipid membranes.