Aerosol synthesis of cargo-filled graphene nanosacks

Octopus-like Microstructure of Graphene Oxide Generated through Laser-Microdroplet Interaction for Adhesive Coating

The octopus, as one of the most famous celebrities in bionics, has provided various inspirations for camouflage materials, soft-bodied robots, and flexible grabbers. The miniaturization of such structures will help the development of microrobots, microdelivery of drugs, and surface coating. With the lack of relevant effective preparation approaches, however, the generation of such octopus-like structures with a size of ∼1 μm or below is challenging. Here, we develop an approach based on laser-microdroplet interaction for generating an octopus-like structure with a size of ∼1 μm. The developed approach uses laser-microdroplet interaction to provide a large driving force of ∼107 Pa at a confined space (<1 μm), locally crumpling the precursor in the microdroplet. The locally crumpled particles possess both crumpled and uncrumpled structures that resemble an octopus's head and soft body. In the adhesion test, the octopus-like particles exhibit high adhesive properties in air, in water, and on a flexible substrate. In the electrochemical test, the octopus-like particles on flexible electrodes show good electrochemical and adhesive properties under hundreds of bending cycles. Benefiting from the combination of crumpled and uncrumpled morphologies, the created particles with octopus-like microstructure are demonstrated to possess comprehensive performance, exhibiting wide application potentials in the fields of microswimmers, surface coatings, and electrochemistry. Additionally, the method developed in this work has the advantages of concentrated energy in a confined space, displaying prospective potentials in micro- and nanoprocessing.

Dielectrophoretic force-induced wrinkling of graphene oxide: Enhancing electrical conductivity and expanding biosensing applications

Graphene oxide (GO) has many advantages, making it suitable for various applications. However, it has low electrical conductivity, restricting its applicability to electrochemical biosensors. This study used dielectrophoretic (DEP) force to control the movement and deformation of GO nanosheets to achieve high electrical conductivity without the chemical reduction of oxygen functional groups. Subjecting the DEP force to GO nanosheets induced physical deformation leading to the formation of wrinkled structures. A computational simulation was performed to set an appropriate electrical condition for operating a positive DEP force effect of at least 1019 v2/m3, and the interdigitated microelectrode structure was selected. The resulting wrinkled GO exhibited significantly improved electrical conductivity, reaching 21.721 μS while preserving the essential oxygen functional groups. Furthermore, a biosensor was fabricated using wrinkled GO deposited via DEP force. The biosensor demonstrated superior sensitivity, exhibiting a 9.6-fold enhancement compared with reduced GO (rGO) biosensors, as demonstrated through biological experiments targeting inducible nitric oxide synthase. This study highlights the potential of using DEP force to enhance electrical conductivity in GO-based biosensing applications, opening new avenues for high-performance diagnostics.

Buckling of a monolayer of platelike particles trapped at a fluid-fluid interface

Particles trapped at a fluid-fluid interface by capillary forces can form a monolayer that jams and buckles when subject to uniaxial compression. Here we investigate experimentally the buckling mechanics of monolayers of millimeter-sized rigid plates trapped at a planar fluid-fluid interface subject to uniaxial compression in a Langmuir trough. We quantified the buckling wavelength and the associated force on the trough barriers as a function of the degree of compression. To explain the observed buckling wavelength and forces in the two-dimensional (2D) monolayer, we consider a simplified system composed of a linear chain of platelike particles. The chain system enables us to build a theoretical model which is then compared to the 2D monolayer data. Both the experiments and analytical model show that the wavelength of buckling of a monolayer of platelike particles is of the order of the particle size, a different scaling from the one usually reported for monolayers of spheres. A simple model of buckling surface pressure is also proposed, and an analysis of the effect of the bending rigidity resulting from a small overlap between nanosheet particles is presented. These results can be applied to the modeling of the interfacial rheology and buckling dynamics of interfacial layers of 2D nanomaterials.

Crumpling Defective Graphene Sheets

Upon crumpling, graphene sheets yield intriguing hierarchical structures with high resistance to compression and aggregation, garnering a great deal of attention in recent years for their remarkable potential in a variety of applications. Here, we aim to understand the effect of Stone-Wales (SW) defects, i.e., a typical topological defect of graphene, on the crumpling behavior of graphene sheets at a fundamental level. By employing atomistically informed coarse-grained molecular dynamics (CG-MD) simulations, we find that SW defects strongly influence the sheet conformation as manifested by the change in size scaling laws and weaken the self-adhesion of the sheet during the crumpling process. Remarkably, the analyses of the internal structures (i.e., local curvatures, stresses, and cross-section patterns) of crumpled graphene emphasize the enhanced mechanical heterogeneity and "glass-like" amorphous state elicited by SW defects. Our findings pave the way for understanding and exploring the tailored design of crumpled structure via defect engineering.

Single-chirality of single-walled carbon nanotubes (SWCNTs) through chromatography and its potential biological applications

Gel chromatography is used to separate single-chirality and selective-diameter SWCNTs. We also explore the use of photothermal therapy and biosensor applications based on single-chirality, selected-diameter, and unique geometric shape.

Enriched dietary saturated fatty acids induce trained immunity via ceramide production that enhances severity of endotoxemia and clearance of infection

Trained immunity is an innate immune memory response that is induced by a primary inflammatory stimulus that sensitizes monocytes and macrophages to a secondary pathogenic challenge, reprogramming the host response to infection and inflammatory disease. Dietary fatty acids can act as inflammatory stimuli, but it is unknown if they can act as the primary stimuli to induce trained immunity. Here we find mice fed a diet enriched exclusively in saturated fatty acids (ketogenic diet; KD) confer a hyper-inflammatory response to systemic lipopolysaccharide (LPS) and increased mortality, independent of diet-induced microbiome and hyperglycemia. We find KD alters the composition of the hematopoietic stem cell compartment and enhances the response of bone marrow macrophages, monocytes, and splenocytes to secondary LPS challenge. Lipidomics identified enhanced free palmitic acid (PA) and PA-associated lipids in KD-fed mice serum. We found pre-treatment with physiologically relevant concentrations of PA induces a hyper-inflammatory response to LPS in macrophages, and this was dependent on the synthesis of ceramide. In vivo, we found systemic PA confers enhanced inflammation and mortality in response to systemic LPS, and this phenotype was not reversible for up to 7 days post-PA-exposure. Conversely, we find PA exposure enhanced clearance of Candida albicans in Rag1-/- mice. Lastly, we show that oleic acid, which depletes intracellular ceramide, reverses PA-induced hyper-inflammation in macrophages and enhanced mortality in response to LPS. These implicate enriched dietary SFAs, and specifically PA, in the induction of long-lived innate immune memory and highlight the plasticity of this innate immune reprogramming by dietary constituents.

Encapsulating a Responsive Hydrogel Core for Void Space Modulation in High-Stability Graphene-Wrapped Silicon Anodes

Due to its formidably high theoretical capacity (3590 mAh/g at room temperature), silicon (Si) is expected to replace graphite as the dominant anode for higher energy density lithium (Li)-ion batteries. However, stability issues stemming from silicon's significant volume expansion (∼300%) upon lithiation have slowed down commercialization. Herein, we report the design of a scalable process to engineer core-shell structures capable of buffering this volume expansion, which utilize a core made up of a poly(ethylene oxide)-carboxymethyl cellulose hydrogel and silicon protected by a crumpled graphene shell. The volume expansion of the hydrogel upon exposure to water creates a void space between the Si-Si and Si-rGO interfaces within the core when the gel dries. Unlike sacrificial spacers, the dehydrated hydrogel remains in the core and acts as an elastic Li-ion conductor, which improves the stability and high rate performance. The optimized composite electrodes retain ∼81.7% of their initial capacity (1055 mAh/(g_rGO+gel+Si)) after 320 cycles when an active material loading of 1 mg/cm² is used. At more practical mass loadings (2.5 mg/cm²), the electrodes achieve 2.04 mAh/cm² and retain 79% of this capacity after 200 cycles against a lithium half-cell. Full cells assembled using a lithium ion phosphate cathode lose only 6.7% of their initial capacity over 100 cycles, demonstrating the potential of this nanocomposite anode for use in next-generation Li-ion batteries.

The Ripple Effect of Graphite Nanofilm on Stretchable Polydimethylsiloxane for Optical Sensing

Graphene-based optical sensing devices have been widely studied for their broad band absorption, high carrier mobility, and mechanical flexibility. Due to graphene’s weak light absorption, studies on graphene-based optical sensing thus far have focused on hybrid heterostructure devices to enhance photo-absorption. Such hybrid devices need a complicated integration process and lead to deteriorating carrier mobility as a result of heterogeneous interfaces. Rippled or wrinkled graphene has been studied in electronic and optoelectronic devices. However, concrete demonstrations of the impact of the morphology of nanofilms (e.g., graphite and graphene) associated with light absorption in optical sensing devices have not been fully examined. This study explored the optical sensing potential of a graphite nanofilm surface with ripples induced by a stretchable polydimethylsiloxane (PDMS) supporting layer under different stretch:release ratios and then transferred onto silicon, both under experimental conditions and via simulation. The optical sensing potential of the rippled graphite nanofilm was significantly enhanced (260 mA/W at the stretch–release state of 30%), as compared to the pristine graphite/PDMS (20 mA/W at the stretch–release state of 0%) under laser illumination at a wavelength of 532 nm. In addition, the results of our simulated computation also confirmed the improved light absorption of rippled graphite nanofilm surface-based optical sensing devices, which was comparable with the results found in the experiment.

In Situ Growth of Novel Graphene Nanostructures in Reduced Graphene Oxide Microspherical Assembly with Restacking-Resistance and Inter-Particle Contacts for Energy Storage Devices

Graphene is extensively investigated for various energy storage systems. However, the very low density (<0.01 g cm^-3 ) of graphene nanosheets has hindered its further applications. To solve this issue, a controlled assembly of 2D graphene building blocks should be developed into graphene microspheres with high packing density, and restacking of graphene should be prevented to ensure an electrochemically accessible surface area during the assembly. Furthermore, graphene microspheres should have multiple 1D external conductive architecture to promote contacts with the neighbors. This study reports in situ growth of novel graphene nanostructures in reduced graphene oxide microspherical assembly (denoted as GT/GnS@rGB) with restacking resistance and interparticle contacts, for electrochemical energy storage. The GT/GnS@rGB showed high gravimetric (231.8 F g^-1 ) and volumetric (181.5 F cm^-3 ) capacitances at 0.2 A g^-1 in organic electrolyte with excellent rate capabilities of 94.3% (@ 0.2 vs 10 Ag^-1 ). Furthermore, GT/GnS@rGB exhibited excellent cycling stability (96.1% of the initial capacitance after 100 000 charge/discharge cycles at 2 A g^-1 ). As demonstrated in the electrochemical evaluation as electrode materials for electrical double-layer capacitors, unique structural and textural features of the GT/GnS@rGB would be beneficial in the use of graphene assembly for energy storage applications.

Controlling Void Space in Crumpled Graphene-Encapsulated Silicon Anodes using Sacrificial Polystyrene Nanoparticles

Silicon anodes have a theoretical capacity of 3590 mAh g^-1 (for Li₁₅ Si₄ , at room temperature), which is tenfold higher than the graphite anodes used in current Li-ion batteries. This, and silicon's natural abundance, makes it one of the most promising materials for next-generation batteries. Encapsulating silicon nanoparticles (Si NPs) in a crumpled graphene shell by spray drying or spray pyrolysis are promising and scalable methods to produce core-shell structures, which buffer the extreme volume change (>300 vol %) caused by (de)lithiaton of silicon. However, capillary forces cause the graphene-based materials to tightly wrap around Si NP clusters, and there is little control over the void space required to further improve cycle life. Herein, a simple strategy is developed to engineer void-space within the core by incorporating varying amounts of similarly sized polystyrene (PS) nanospheres in the spray drier feed mixture. The PS completely decomposes during thermal reduction of the graphene oxide shell and results in Si cores of varying porosity. The best performance is achieved at a 1 : 1 ratio (PS/Si), leading to high capacities of 1638, 1468, and 1179 mAh g^-1 _Si+rGO at 0.1, 1, and 4 A g^-1 , respectively. Moreover, at 1 A g^-1 , the capacity retention is 80.6 % after 200 cycles. At a practical active material loading of 2.4 mg cm^-2 , the electrodes achieve an areal capacity of 2.26 mAh cm^-2 at 1 A g^-1 .

Micro-droplet Trapping and Manipulation: Understanding Aerosol Better for a Healthier Environment

Understanding the physicochemical properties and heterogeneous processes of aerosols is key not only to elucidate the impacts of aerosols on the atmosphere and humans but also to exploit their further applications, especially for a healthier environment. Experiments that allow for spatially control of single aerosol particles and investigations on the fundamental properties and heterogeneous chemistry at the single-particle level have flourished during the last few decades, and significant breakthroughs in recent years promise better control and novel applications aimed at resolving key issues in aerosol science. Here we propose graphene oxide (GO) aerosols as prototype aerosols containing polycyclic aromatic hydrocarbons, and GO can behave as two-dimensional surfactants which could modify the interfacial properties of aerosols. We describe the techniques of trapping single particles and furthermore the current status of the optical spectroscopy and chemistry of GO. The current applications of these single-particle trapping techniques are summarized and interesting future applications of GO aerosols are discussed.

Enhanced Cycle Stability of Crumpled Graphene-Encapsulated Silicon Anodes via Polydopamine Sealing

Despite silicon being a promising candidate for next-generation lithium-ion battery anodes, self-pulverization and the formation of an unstable solid electrolyte interface, caused by the large volume expansion during lithiation/delithiation, have slowed its commercialization. In this work, we expand on a controllable approach to wrap silicon nanoparticles in a crumpled graphene shell by sealing this shell with a polydopamine-based coating. This provides improved structural stability to buffer the volume change of Si, as demonstrated by a remarkable cycle life, with anodes exhibiting a capacity of 1038 mA h/g after 200 cycles at 1 A/g. The resulting composite displays a high capacity of 1672 mA h/g at 0.1 A/g and can still retain 58% when the current density increases to 4 A/g. A systematic investigation of the impact of spray-drying parameters on the crumpled graphene morphology and its impact on battery performance is also provided.

Graphene coupled TiO2 photocatalysts for environmental applications: A review

Nanostructured photocatalysts have always offered opportunities to solve issues concerned with the environmental challenges caused by rapid urbanization and industrialization. These materials, due to their tunable physicochemical characteristics, are capable of providing a clean and sustainable ecosystem to humanity. One of the current thriving research focuses of visible-light-driven photocatalysts is on the nanocomposites of titanium dioxide (TiO₂) with carbon nanostructures, especially graphene. Coupling TiO₂ with graphene has proven more active by photocatalysis than TiO₂ alone. It is generally considered that graphene sheets act as an electron acceptor facilitating the transfer and separation of photogenerated electrons during TiO₂ excitation, thereby reducing electron-hole recombination. This study briefly reviews the fundamental mechanism and interfacial charge-transfer dynamics in TiO₂/graphene nanocomposites. Design strategies of various graphene-based hybrids are highlighted along with some specialized synthetic routes adopted to attain preferred properties. Importantly, the enhancing interfacial charge transfer of photogenerated e¯_CB through the graphene layers by morphology orientation of TiO₂, predominated exposure of their high energy crystal facets, defect engineering, enhancing catalytic sites in graphene, constructing dedicated architectures, tuning the nanomaterial dimensionality at the interface, and employing the synergism adopted through various modifications, are systematically compiled. Portraying the significance of these photocatalytic hybrids in environmental remediation, important applications including air and water purification, self-cleaning surfaces, H₂ production, and CO₂ reduction to desired fuels, are addressed.

Progress in modifications of 3D graphene-based adsorbents for environmental applications

3D graphene-based materials are promising adsorbents for environmental applications. Furthermore, increasing attention has been paid to the improvement of 3D graphene adsorbents for removing pollutants. In this article, the progress in the modification of 3D graphene materials and their performance for removing pollutants were reviewed. The modification strategies, which were classified as (1) the activation with CO₂ (steam and other oxidants) and (2) the surface functionalization with polymers (metals, and metal oxides), were evaluated. The performances of modified 3D graphene materials were assessed for the removal of waste gases (such as CO₂), refractory organics, and heavy metals. The challenges and future research directions were discussed for the environmental applications of 3D graphene materials.

Advanced Optical Detection through the Use of a Deformably Transferred Nanofilm

Graphene has been extensively investigated in advanced photodetection devices for its broadband absorption, high carrier mobility, and mechanical flexibility. Due to graphene’s low optical absorptivity (2.3%), graphene-based photodetection research so far has focused on hybrid systems to increase photoabsorption. However, such hybrid systems require a complicated integration process and lead to reduced carrier mobility due to heterogeneous interfaces. Crumpled or deformed graphene has previously been reported in electronics and optoelectronics. However, a depth study on the influence of the morphology of nanofilms (e.g., graphite or graphene) related to light absorption in photodetection devices has not been demonstrated yet. Here, we present an interesting study in terms of the effect of the deformable surface and the smooth surface of a nanofilm transferred onto Si through two transfer strategies using isopropanol injection and nitrogen blowing (to form a deformable nanofilm surface) and deionized water injection and van der Waals interaction (to form a smooth nanofilm surface). As a result, optical detection in the case of the deformable nanofilm surface was enhanced significantly (~100%) compared with that of the smooth nanofilm surface in the visible laser wavelength (532 nm). In addition, evidence from the computational simulation also firmly affirms an advancement in the optical detection of deformed nanofilm-surface-based photodetection devices compatible with the experimental results.

Graphene-based encapsulation of liquid metal particles

Liquid metals are a promising functional material due to their unique combination of metallic properties and fluidity at room temperature. They are of interest in wide-ranging fields including stretchable and flexible electronics, reconfigurable devices, microfluidics, biomedicine, material synthesis, and catalysis. Transformation of bulk liquid metal into particles has enabled further advances by allowing access to a broader palette of fabrication techniques for device manufacture or by increasing area available for surface-based applications. For gallium-based liquid metal alloys, particle stabilization is typically achieved by the oxide that forms spontaneously on the surface, even when only trace amounts of oxygen are present. The utility of the particles formed is governed by the chemical, electrical, and mechanical properties of this oxide. To overcome some of the intrinsic limitations of the native oxide, it is demonstrated here for the first time that 2D graphene-based materials can encapsulate liquid metal particles during fabrication and imbue them with previously unattainable properties. This outer encapsulation layer is used to physically stabilize particles in a broad range of pH environments, modify the particles' mechanical behavior, and control the electrical behavior of resulting films. This demonstration of graphene-based encapsulation of liquid metal particles represents a first foray into the creation of a suite of hybridized 2D material coated liquid metal particles.

Clay nanolayer encapsulation, evolving from origins of life to future technologies

Clays are the siblings of graphite and graphene/graphene-oxide. There are two basic ways of using clays for encapsulation of sub-micron entities such as molecules, droplets, or nanoparticles, which is either by encapsulation in the interlayer space of clay nanolayered stacked particles ("the graphite way"), or by using exfoliated clay nanolayers to wrap entities in packages ("the graphene way"). Clays maybe the prerequisites for life on earth and can also be linked to the natural formation of other two-dimensional materials such as naturally occurring graphite and its allotropes. Here we discuss state-of-the-art in the area of clay-based encapsulation and point to some future scientific directions and technological possibilities that could emerge from research in this area.

Solution Evaporation-Driven Crumpling and Assembling of Large-Accessible-Space, High-Mechanical-Strength Graphene/Carbon Nanotube Composite Nanoparticles

Crumpled graphene particles that are converted and assembled from 2D planar graphene sheets create a subtle material platform for widespread applications of graphene in a low-cost and scalable manner. However, such crumpled particles are suffering from small spatial availabilities in geometry and low strength in mechanical deformation due to the limited numbers and stabilities of connections among individual deformed graphene. Herein, we report, in both theoretical analysis and large-scale atomistic simulations, that a crumpled graphene composite nanoparticle with large accessible space and high mechanical strength can be achieved by encapsulating folded carbon nanotubes (CNTs) inside via a solvent evaporation-induced assembly approach. A unified energy-based theoretical model is developed to address the kinetic migration of both CNTs and graphene suspended in a liquid droplet and their crumpling and assembling mechanism into a composite particle by solution evaporation. The contact probability, surface ridge densities, and geometric size in assembled graphene/CNT composite nanoparticles are quantitatively extracted after the complete evaporation of liquid and are further correlated with their accessible space including accessible surface area and volume and mechanical strength. The coarse-grained molecular dynamics simulations are conducted to uncover structural and morphological evolution of graphene/CNT composite nanoparticles with solution evaporation, and the results show remarkable agreement with theoretical predictions. This study offers a theoretical foundation for synthesizing highly connected, mechanically enhanced, crumpled particles with tunable spatial porous structures by tailoring graphene and CNTs for applications in functional structures and devices.

Computational study of the water-driven graphene wrinkle life-cycle towards applications in flexible electronics

The ubiquitous presence of wrinkles in two-dimensional materials alters their properties significantly. It is observed that during the growth process of graphene, water molecules, sourced from ambient humidity or transferred method used, can get diffused in between graphene and the substrate. The water diffusion causes/assists wrinkle formation in graphene, which influences its properties. The diffused water eventually dries, altering the geometrical parameters and properties of wrinkled graphene nanoribbons. Our study reveals that the initially distributed wrinkles tend to coalesce to form a localized wrinkle whose configuration depends on the initial wrinkle geometry and the quantity of the diffused water. The movement of the localized wrinkle is categorized into three modes—bending, buckling, and sliding. The sliding mode is characterized in terms of velocity as a function of diffused water quantity. Direct bandgap increases linearly with the initial angle except the highest angle considered (21°), which can be attributed to the electron tunneling effect observed in the orbital analysis. The system becomes stable with an increase in the initial angle of wrinkle as observed from the potential energy plots extracted from MD trajectories and confirmed with the DOS plot. The maximum stress generated is less than the plastic limit of the graphene.

Aerosol Synthesis of High Entropy Alloy Nanoparticles

Homogeneously mixing multiple metal elements within a single particle may offer new material property functionalities. High entropy alloys (HEAs), nominally defined as structures containing five or more well-mixed metal elements, are being explored at the nanoscale, but the scale-up to enable their industrial application is an extremely challenging problem. Here, we report an aerosol droplet-mediated technique toward scalable synthesis of HEA nanoparticles with atomic-level mixing of immiscible metal elements. An aqueous solution of metal salts is nebulized to generate ∼1 μm aerosol droplets, which when subjected to fast heating/quenching result in decomposition of the precursors and freezing-in of the zero-valent metal atoms. Atomic-level resolution scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy analysis reveals that all metal elements in the nanoparticles are homogeneously mixed at the atomic level. We believe that this approach offers a facile and flexible aerosol droplet-mediated synthesis technique that will ultimately enable bulk processing starting from a particulate HEA.

Facile Production of Graphenic Microsheets and Their Assembly via Water-Based, Surfactant-Aided Mechanical Deformations

Expandable graphite (EG) and few-layer graphene (FLG) have proven to be instrumental materials for various applications. The production of EG and FLG has been limited to batch processes using numerous intercalating agents, especially organic acids. In this study, a Taylor-Couette reactor (TCR) setup is used to expand and exfoliate natural graphite and produce a mixture of EG and FLG in aqueous solutions using an amphiphilic dispersant and a semiflexible stabilizer. Laminar Couette flow structure and high shear rates are achieved via the rotation of the outer cylinder while the inner cylinder is still, which circumvents vortex formation because of the suppression of centrifugal forces. Our results reveal that the level of expansion and exfoliation using an aqueous solution and a TCR is comparable to that using commercial EG (CEG) synthesized by intercalating sulfuric acid. More importantly, the resultant EG and FLG flakes are more structurally homogeneous than CEG, the ratio of FLG to EG increases with increasing shearing time, and the produced FLG sheets exhibit large lateral dimensions (>10 μm). The aqueous solutions of EG and FLG are wet-spun to produce ultralight fibers with a bulk density of 0.35 g/cm³. These graphene fibers exhibit a mechanical strength of 0.5 GPa without any modification or thermal treatment, which offers great potential in light-weight composite applications.

Designing Hierarchical Nanostructures from Conformable and Deformable Thin Materials

This Perspective focuses on the design of hierarchical structures in deformable thin materials by patterning mechanical instabilities. Fabrication of three-dimensional (3D) structures with multiple length scales-starting at the nanoscale-can result in on-demand surface functionalities from the modification of the mechanical, chemical, and optical properties of materials. Conventional top-down lithography, however, cannot achieve 3D patterns over large areas (>cm²). In contrast, a bottom-up approach based on controlling strain in layered nanomaterials conformally coated on polymeric substrates can produce multiscale structures in parallel. In-plane and out-of-plane structural hierarchies formed by conformal buckling show unique structure-function relationships. Programmable hierarchical surfaces offer prospects to tune global- and local-level characteristics of nanomaterials that will positively impact applications in nanomechanics, nanoelectronics, and nanophotonics.

Improved reductive transformation of iopromide by magnetite containing reduced graphene oxide nanosacks as electron shuttles

The novel application of magnetite containing reduced graphene oxide nanosacks (MrGO-N) as electron shuttles to improve the reductive degradation of pharmaceutical pollutant, iopromide (IOP), was evaluated. The MrGO-N were synthesized by ultrasonicated nebulization process, and their physicochemical characterization was performed by potentiometric titrations, zeta potential, high resolution transmission electron microscopy (HR-TEM), X-ray diffraction, as well as by Raman and Fourier transform infrared spectroscopies. Results demonstrated the thermal reduction of precursor graphene oxide sheets, the removal of different oxygenated groups, and the successful assembly of magnetite nanoparticles (MNP) in the graphene sacks. Also, reduction experiments revealed 72 % of IOP removal efficiency and up to 2.5-fold faster degradation of this pollutant performed with MrGO-N as redox catalysts in batch assays and with sulfide as electron donor. Chemical transformation pathway of IOP provides evidence of complete dehalogenation and further transformation of aromatic ring substituents. Greater redox-mediating ability of MrGO-N was observed, which was reflected in the catalytic activity of these nanomaterials during the reductive degradation of IOP. Transformation byproducts with simpler chemical structure were identified, which could lead to complete degradation by conventional methodologies in a complementary treatment process. Redox-mediating activity of MrGO-N could potentially be applied in wastewater treatment systems in order to facilitate the biodegradation of priority contaminants.

Self-Folding Hybrid Graphene Skin for 3D Biosensing

Biological samples such as cells have complex three-dimensional (3D) spatio-molecular profiles and often feature soft and irregular surfaces. Conventional biosensors are based largely on 2D and rigid substrates, which have limited contact area with the entirety of the surface of biological samples making it challenging to obtain 3D spatially resolved spectroscopic information, especially in a label-free manner. Here, we report an ultrathin, flexible skinlike biosensing platform that is capable of conformally wrapping a soft or irregularly shaped 3D biological sample such as a cancer cell or a pollen grain, and therefore enables 3D label-free spatially resolved molecular spectroscopy via surface-enhanced Raman spectroscopy (SERS). Our platform features an ultrathin thermally responsive poly( N-isopropylacrylamide)-graphene-nanoparticle hybrid skin that can be triggered to self-fold and wrap around 3D micro-objects in a conformal manner due to its superior flexibility. We highlight the utility of this 3D biosensing platform by spatially mapping the 3D molecular signatures of a variety of microparticles including silica microspheres, spiky pollen grains, and human breast cancer cells.

Facile fabrication of crumpled graphene oxide nanosheets and its Platinum nanohybrids for high efficient catalytic activity

Crumpled graphene oxide nanosheets have drawn large attentions due to its compressibility and self-avoiding stacking as flat graphene sheets trend to aggregate and restack. Up to now, most of the synthesis approaches were relied on external substrates, such as elastic substrates or ultrasonic atomizer, and the crumpled structures were obtained in a solid state directly. Here we report a facile method to produce crumpled dispersive nanosheets in solution through general base-washing treatment by taking advantage of the amphipathy of GO nanosheets. With the dissociation of oxygen-functional groups on nanosheets in alkaline environment, highly water-soluble oxidative debris (OD) would fall off from the nanosheets due to the increase of electrostatic repulsions, and resulted in the crumple of the flat sheets, while the covalent oxygen-functional groups on the nanosheets were reserved. As a result, the nanosheets remained dispersible in solution, and could be used directly for surface modifications. Pt nanoparticles could be directly deposited onto both sides of the sheets through common nucleation and growth from precursor ions process. Compared with flat graphene-based hybrid, the catalytic performance of crumpled-graphene-Pt (CG-Pt) is more excellent and attractive, and corresponding apparent kinetic rate constant (k_app) of CG-Pt toward 4-nitrophenol reduction is enhanced by 2.7-4.6-fold. This study provides a new and facile way to fabricate crumpled nanosheets and demonstrates to be easy modified for various purpose.

Novel application of magnetic nano-carbon composite as redox mediator in the reductive biodegradation of iopromide in anaerobic continuous systems

The redox-mediating capacity of magnetic reduced graphene oxide nanosacks (MNS) to promote the reductive biodegradation of the halogenated pollutant, iopromide (IOP), was tested. Experiments were performed using glucose as electron donor in an upflow anaerobic sludge blanket (UASB) reactor under methanogenic conditions. Higher removal efficiency of IOP in the UASB reactor supplied with MNS as redox mediator was observed as compared with the control reactor lacking MNS. Results showed 82% of IOP removal efficiency under steady state conditions in the UASB reactor enriched with MNS, while the reactor control showed IOP removal efficiency of 51%. The precise microbial transformation pathway of IOP was elucidated by high-performance liquid chromatography coupled to mass spectroscopy (HPLC-MS) analysis. Biotransformation by-products with lower molecular weight than IOP molecule were identified in the reactor supplied with MNS, which were not detected in the reactor control, indicating the contribution of these magnetic nano-carbon composites in the redox conversion of this halogenated pollutant. Reductive reactions of IOP favored by MNS led to complete dehalogenation of the benzene ring and partial rupture of side chains of this pollutant, which is the first step towards its complete biodegradation. Possible reductive mechanisms that took place in the biodegradation of IOP were stated. Finally, the novel and successful application of magnetic graphene composites in a continuous bioreactor to enhance the microbial transformation of IOP was demonstrated.

Two- and three-dimensional self-folding of free-standing graphene by liquid evaporation

Two-dimensional (2-D) atomically thin graphene has exhibited overwhelming excellent properties over its bulk counterpart graphite, yet the broad applications and explorations of its unprecedented properties require a diversity of its geometric morphologies, beyond its inherently planar structures. In this study, we present a self-folding approach for converting 2-D planar free-standing graphene to 2-D and 3-D folded structures through the evaporation of its liquid solutions. This approach involves competition between the surface energy of the liquid, and the deformation energy and van der Waals energy of graphene. An energy-based theoretical model is developed to describe the self-folding process during liquid evaporation by incorporating both graphene dimensions and surface wettability. The critical elastocapillary length by liquid evaporation is extracted and exemplified by investigating three typical graphene geometries with rectangular, circular and triangular shapes. After the complete evaporation of the liquid, the critical self-folding length of graphene that can enable a stable folded pattern by van der Waals energy is also obtained. In parallel, full-scale molecular dynamics (MD) simulations are performed to monitor the evolution of deformation energies and folded patterns with liquid evaporation. The simulation results demonstrate the formation of 2-D folded racket-like and 3-D folded cone-like patterns and show remarkable agreement with theoretical predictions in both energy variations and folded patterns. This work offers quantitative guidance for controlling the self-folding of graphene and other 2-D materials into complex structures by liquid evaporation.

Effect of Humidity and Water Intercalation on the Tribological Behavior of Graphene and Graphene Oxide

In this work, the effect of humidity and water intercalation on the friction and wear behavior of few-layers of graphene and graphene oxide (GO) was studied using friction force microscopy. Thickness measurements demonstrated significant water intercalation within GO affecting its surface topography (roughness and protrusions), whereas negligible water intercalation of graphene was observed. It was found that water intercalation in GO contributed to wearing of layers at a relative humidity as low as ∼30%. The influence of surface wettability and water adsorption was also studied by comparing the sliding behavior of SiO₂/GO, SiO₂/Graphene, and SiO₂/SiO₂ interfaces. Friction for the SiO₂/GO interface increased with relative humidity due to water intercalation and condensation of water. In contrast, it was observed that adsorption of water molecules lubricated the SiO_2/SiO₂ interface due to easy shearing of water on the hydrophobic surface, particularly once the adsorbed water layers had transitioned from "ice-like water" to "liquid-like water" structures. Lastly, an opposite friction trend was observed for the graphene/SiO₂ interface with water molecules failing to lubricate the interface as compared to the dry graphene/SiO₂ contact.

Wetting Properties of Defective Graphene Oxide: A Molecular Simulation Study

In the present work, the wettability of defective graphene oxide (GO) film is studied by molecular dynamics simulations. A water droplet is deposited on the surface of a graphene oxide membrane, and the contact angle is measured by fitting the liquid⁻vapor interface. Although pristine graphene has few hydrophobic properties with a contact angle of 95°, graphene oxide presents more hydrophilic properties, due to the stronger hydrogen bonds interactions at the interface. Moreover, the introduction of vacancy defects at the graphene oxide surface decreases the wettability of graphene oxide. We find that the contact angle of graphene oxide increases from 70° to 82°, with a defective concentration from 0% to 10%. Our results will help provide a new method for controlling the wetting properties of GO and its additional capabilities in device design for applications.

Aerosol Synthesis of N and N-S Doped and Crumpled Graphene Nanostructures

Chemically modified graphene–based materials (CMG) are currently attracting a vast interest in their application in different fields. In particular, heteroatom-doped graphenes have revealed great potentialities in the field of electrocatalysis as substitutes of fuel cell noble metal–based catalysts. In this work, we investigate an innovative process for doping graphene nanostructures. We optimize a novel synthetic route based on aerosol preparation, which allows the simultaneous doping, crumpling, and reduction of graphene oxide (GO). Starting from aqueous solutions containing GO and the dopant precursors, we synthesize N- and N,S-dual-doped 3D graphene nanostructures (N-cGO and N,S-cGO). In the aerosol process, every aerosol droplet can be considered as a microreactor where dopant precursors undergo thermal decomposition and react with the GO flakes. Simultaneously, thanks to the relatively high temperature, GO undergoes crumpling and partial reduction. Using a combination of spectroscopic and microscopic characterization techniques, we investigate the morphology of the obtained materials and the chemical nature of the dopants within the crumpled graphene sheets. This study highlights the versatility of the aerosol process for the design of new CMG materials with tailored electrocatalytic properties.

Growth of Sub-5 nm Metal Nanoclusters in Polymer Melt Aerosol Droplets

Ultrasmall metal nanoparticles are inherently unstable because of their high specific surface area. This work investigates how growth and aggregation of these nanostructures can be circumvented by incorporating them into a polymer matrix in an on-the-fly growth process. We demonstrate the formation of sub-5 nm particles of Ni, Co, and Cu nanoparticles in a polymer matrix using an aerosol single-drop reactor approach. The rapid thermal pulse given to the aerosol particles enables the formation of nuclei and growth, with subsequent rapid quenching to freeze in the structure. The role of the temperature as well as the precursor concentration of the resulting size and morphology is discussed. A characteristic time analysis and an analysis of the particle size distributions lead to the conclusion that growth is governed by nucleation and surface growth, with little coagulation or Ostwald ripening. Finally, we note that this aerosol route is amenable to scale-up for large-scale production of nanoclusters that can either be used as is within the polymer or released by solvent extraction, depending on the application.

Reducing the barrier effect of graphene sheets on a Ag cocatalyst to further improve the photocatalytic performance of TiO2

By avoiding the possible barrier influence of graphene on other cocatalysts, the photocatalytic properties of the composites containing multi-cocatalysts could be further improved.

Study of Graphene Oxide Structural Features for Catalytic, Antibacterial, Gas Sensing, and Metals Decontamination Environmental Applications

This study represents a comprehensive review about the structural features of graphene oxide (GO) and its significance in environmental applications. Two dimensional (2D) GO is tremendously focused in advanced carbon-based nanomaterials for environmental applications due to its tunable physicochemical characteristics. Herein, we report foundational structural models of GO and explore the chemical bonding of oxygen moieties, with graphite basal plane using various characterization tools. Moreover, the impact of these oxygen moieties and the morphology of GO for environmental applications such as removal of metal ions and catalytic, antibacterial, and gas sensing abilities have here been critically reviewed for the first time. Environmental applications of GO are highly significant because, in the recent era, the fast progress of industries, even in the countryside, results in air and water pollution. GO has been widely investigated by researchers to eradicate such environmental issues and for potential industrial and clinical applications due to its 2D structural features, large surface area, presence of oxygen moieties, nonconductive nature, intense mechanical strength, excellent water dispersibility, and tunable optoelectronic properties. Thence, particular emphasis is directed toward the modification of GO by varying the number of its oxygen functional groups and by coupling it with other exotic nanomaterials to induce unique properties in GO for potential environmental remediation purposes.

Ultrathin thermoresponsive self-folding 3D graphene

Graphene and other two-dimensional materials have unique physical and chemical properties of broad relevance. It has been suggested that the transformation of these atomically planar materials to three-dimensional (3D) geometries by bending, wrinkling, or folding could significantly alter their properties and lead to novel structures and devices with compact form factors, but strategies to enable this shape change remain limited. We report a benign thermally responsive method to fold and unfold monolayer graphene into predesigned, ordered 3D structures. The methodology involves the surface functionalization of monolayer graphene using ultrathin noncovalently bonded mussel-inspired polydopamine and thermoresponsive poly(N-isopropylacrylamide) brushes. The functionalized graphene is micropatterned and self-folds into ordered 3D structures with reversible deformation under a full control by temperature. The structures are characterized using spectroscopy and microscopy, and self-folding is rationalized using a multiscale molecular dynamics model. Our work demonstrates the potential to design and fabricate ordered 3D graphene structures with predictable shape and dynamics. We highlight applicability by encapsulating live cells and creating nonlinear resistor and creased transistor devices.

Wrinkling and Periodic Folding of Graphene Oxide Monolayers by Langmuir-Blodgett Compression

Crumples, wrinkles, and other three-dimensional topographical features in graphene oxide (GO) have been of recent interest as these features have improved material performance for a variety of applications. However, wrinkling of monolayer GO films has yet to be reported. Herein, we demonstrate wrinkling and folding of monolayer GO using the Langmuir-Blodgett technique for the first time. First, cetyltrimethylammonium bromide (CTAB) and GO are deposited on the air-water interface and uniaxially compressed to form a monolayer. CTAB enhances in-plane rigidity of the monolayer through hydrophobic tail aggregation, preventing GO-GO in-plane sliding behavior. Overcompression of the GO monolayer results in the out-of-plane periodic nanoscale wrinkling and in turn generates folds that are stable during deposition onto a substrate and GO chemical reduction. Furthermore, we investigate one potential application of this material by constructing a 3D electrode of the stacked nanofolded GO-CTAB layers that exhibits superior volumetric capacitance compared to commercial devices and comparable volumetric capacitance compared to high-performing recently reported devices. The high volumetric capacitance is attributed to the electrolyte-accessible channels generated by the nanofolds which are similar in size to the hydrated ions.

From Flatland to Spaceland: Higher Dimensional Patterning with Two-Dimensional Materials

The creation of three-dimensional (3D) structures from two-dimensional (2D) nanomaterial building blocks enables novel chemical, mechanical or physical functionalities that cannot be realized with planar thin films or in bulk materials. Here, we review the use of emerging 2D materials to create complex out-of-plane surface topographies and 3D material architectures. We focus on recent approaches that yield periodic textures or patterns, and present four techniques as case studies: (i) wrinkling and crumpling of planar sheets, (ii) encapsulation by crumpled nanosheet shells, (iii) origami folding and kirigami cutting to create programmed curvature, and (iv) 3D printing of 2D material suspensions. Work to date in this field has primarily used graphene and graphene oxide as the 2D building blocks, and we consider how these unconventional approaches may be extended to alternative 2D materials and their heterostructures. Taken together, these emerging patterning and texturing techniques represent an intriguing alternative to conventional materials synthesis and processing methods, and are expected to contribute to the development of new composites, stretchable electronics, energy storage devices, chemical barriers, and biomaterials.

Toward the control of graphenic foams

Graphene-based materials are extensively studied, due to their excellent properties and their wide range of possible applications. Attention has recently been paid to three-dimensional-like graphenic structures, such as crumpled graphene sheets and graphenic foams: these kinds of materials can combine the properties of graphene associating high surface area and porosity, what is particularly interesting for energy or catalysis applications. Most of the synthesis methods leading to such structures are based on graphite oxide exfoliation and re-assembly, but in this work we focus on the preparation of graphenic foams by a solvothermal-based process. We performed a solvothermal reaction between ethanol and sodium at 220°C, during 72 h, under 200 bar, followed by a pyrolysis under nitrogen flow. An extended study of the influence of the temperature (800°C–900°C) of pyrolysis evidences an unexpected strong effect of this parameter on the characteristics of the materials. The optimal conditions provide multi-layer graphene (10 layers) foam with a surface area of 2000 m2·g−1. This work is an important step for the understanding of the mechanisms of the thermal treatment. Post-treatments in different experimental conditions are performed in order to modulate the structure and properties of the graphenic foams.

Imaging and Analysis of Encapsulated Objects through Self-Assembled Electron and Optically Transparent Graphene Oxide Membranes

We demonstrate a technique for facile encapsulation and adhesion of micro- and nano objects on arbitrary substrates, stencils, and micro structured surfaces by ultrathin graphene oxide membranes via a simple drop casting of graphene oxide solution. A self-assembled encapsulating membrane forms during the drying process at the liquid-air and liquid-solid interfaces and consists of a water-permeable quasi-2D network of overlapping graphene oxide flakes. Upon drying and interlocking between the flakes, the encapsulating coating around the object becomes mechanically robust, chemically protective, and yet highly transparent to electrons and photons in a wide energy range, enabling microscopic and spectroscopic access to encapsulated objects. The characteristic encapsulation scenarios were demonstrated on a set of representative inorganic and organic micro and nano-objects and microstructured surfaces. Different coating regimes can be achieved by controlling the pH of the supporting solution, and the hydrophobicity and morphology of interfaces. Several specific phenomena such as compression of encased objects by contracting membranes as well as hierarchical encapsulations were observed. Finally, electron as well as optical microscopy and analysis of encapsulated objects along with the membrane effect on the image contrast formation, and signal attenuation are discussed.

Electrohydrodynamic-assisted Assembly of Hierarchically Structured, 3D Crumpled Nanostructures for Efficient Solar Conversions

The tantalizing prospect of harnessing the unique properties of graphene crumpled nanostructures continues to fuel tremendous interest in energy storage and harvesting applications. However, the paper ball-like, hard texture, and closed-sphere morphology of current 3D graphitic nanostructure production not only constricts the conductive pathways but also limits the accessible surface area. Here, we report new insights into electrohydrodynamically-generated droplets as colloidal nanoreactors in that the stimuli-responsive nature of reduced graphene oxide can lead to the formation of crumpled nanostructures with a combination of open structures and doubly curved, saddle-shaped edges. In particular, the crumpled nanostructures dynamically adapt to non-spherical, polyhedral shapes under continuous deposition, ultimately assembling into foam-like microstructures with a highly accessible surface area and spatially interconnected transport pathways. The implementation of such crumpled nanostructures as three-dimensional rear contacts for solar conversion applications realize benefits of a high aspect ratio, electrically addressable and energetically favorable interfaces, and substantial enhancement of both short-circuit currents and fill-factors compared to those made of planar graphene counterparts. Further, the 3D crumpled nanostructures may shed lights onto the development of effective electrocatalytic electrodes due to their open structure that simultaneously allows for efficient water flow and hydrogen escape.

Aerosol synthesis of phase-controlled iron-graphene nanohybrids through FeOOH nanorod intermediates

Iron-based nanoparticles form the basis for a host of sustainable alternative technologies based on this earth-abundant, low-toxicity element that can adopt a variety of oxidation states, crystal phases, and functions. Control of size, shape, and phase stability is a challenge for many nano-iron-based technologies, especially those involving Fe0 that is susceptible to oxidation under ambient conditions. This article presents a continuous method for hybridizing Fe-based nanoparticles with carbon in the form of graphene-encapsulated Fe-based particles with core-shell symmetry that allows flexible control of iron particle size, shape, and phase stability. The method uses FeOOH nanorods and graphene oxide as precursors, and subjects them to an aerosol-phase microdroplet drying and annealing process to yield a range of Fe/C nanohybrids whose structure can be controlled through adjustment of aerosol process temperature and post-synthesis thermal treatment conditions. We demonstrate that FeOOH nanorods can be successfully encapsulated in graphene, and transform during annealing into encapsulated Fe3O4 or Fe0 nanoparticles by reductive fragmentation, where the graphene nanosack acts as a carbothermic reductant. The hybrids are characterized by vibrating sample magnetometry and Cr(VI) reduction rates in aqueous media. The Fe0-graphene hybrids show high activity, good stability, and good recyclability in aqueous Cr(VI) removal due to the effect of graphene encapsulation. The present work suggests this rapid and continuous synthesis method can produce stable Fe-based materials, and can be extended to other metal systems, where graphene encapsulation can induce in situ reduction of metal oxide precursors into zero-valent metal-graphene hybrids.

Graphene-Selenium Hybrid Microballs as Cathode Materials for High-performance Lithium-Selenium Secondary Battery Applications

In this study, graphene-selenium hybrid microballs (G-SeHMs) are prepared in one step by aerosol microdroplet drying using a commercial spray dryer, which represents a simple, scalable continuous process, and the potential of the G-SeHMs thus prepared is investigated for use as cathode material in applications of lithium-selenium secondary batteries. These morphologically unique graphene microballs filled with Se particles exhibited good electrochemical properties, such as high initial specific capacity (642 mA h g(-1) at 0.1 C, corresponding to Se electrochemical utilisation as high as 95.1%), good cycling stability (544 mA h g(-1) after 100 cycles at 0.1 C; 84.5% retention) and high rate capability (specific capacity of 301 mA h g(-1) at 5 C). These electrochemical properties are attributed to the fact that the G-SeHM structure acts as a confinement matrix for suppressing the dissolution of polyselenides in the organic electrolyte, as well as an electron conduction path for increasing the transport rate of electrons for electrochemical reactions. Notably, based on the weight of hybrid materials, electrochemical performance is considerably better than that of previously reported Se-based cathode materials, attributed to the high Se loading content (80 wt%) in hybrid materials.

A Highly Efficient Metal-Free Oxygen Reduction Electrocatalyst Assembled from Carbon Nanotubes and Graphene

A novel carbon-nanotube-graphene hybrid nanostructure is developed using an aerosol-assisted assembly approach. After doping with nitrogen and phosphorus, the prepared hybrid nanomaterials exhibit excellent electrocatalytic performance for oxygen reduction in both alkaline and acidic media. This research presents a continuous and low-cost route to prepare high-performance metal-free electrocatalysts while replacing Pt-based materials.

Wrinkled, wavelength-tunable graphene-based surface topographies for directing cell alignment and morphology

Textured surfaces with periodic topographical features and long-range order are highly attractive for directing cell-material interactions. They mimic physiological environments more accurately than planar surfaces and can fundamentally alter cell alignment, shape, gene expression, and cellular assembly into superstructures or microtissues. Here we demonstrate for the first time that wrinkled graphene-based surfaces are suitable as textured cell attachment substrates, and that engineered wrinkling can dramatically alter cell alignment and morphology. The wrinkled surfaces are fabricated by graphene oxide wet deposition onto pre-stretched elastomers followed by relaxation and mild thermal treatment to stabilize the films in cell culture medium. Multilayer graphene oxide films form periodic, delaminated buckle textures whose wavelengths and amplitudes can be systematically tuned by variation in the wet deposition process. Human and murine fibroblasts attach to these textured films and remain viable, while developing pronounced alignment and elongation relative to those on planar graphene controls. Compared to lithographic patterning of nanogratings, this method has advantages in the simplicity and scalability of fabrication, as well as the opportunity to couple the use of topographic cues with the unique conductive, adsorptive, or barrier properties of graphene materials for functional biomedical devices.

Graphene-based platforms for cancer therapeutics

Graphene is a multifunctional carbon nanomaterial and could be utilized to develop platform technologies for cancer therapies. Its surface can be covalently and noncovalently functionalized with anticancer drugs and functional groups that target cancer cells and tissue to improve treatment efficacies. Furthermore, its physicochemical properties can be harnessed to facilitate stimulus responsive therapeutics and drug delivery. This review article summarizes the recent literature specifically focused on development of graphene technologies to treat cancer. We will focus on advances at the interface of graphene based drug/gene delivery, photothermal/photodynamic therapy and combinations of these techniques. We also discuss the current understanding in cytocompatibility and biocompatibility issues related to graphene formulations and their implications pertinent to clinical cancer management.